ORA-12571 Error,plz explain.
Hi !
Plz, define/explain
ORA-12571: TNS: Packet Writer Failure.
Thanks..
Regards!
Check out this site -
http://www.cryer.co.uk/brian/oracle/ORA12571.htm
Google gives plenty of hits for this error that are quite useful. If you still don't find the problem, try giving a little more detail about when/where you get this error, along with what version of Oracle you are using.
Hope it helps,
A
Similar Messages
-
ORA-12571 error while creating packages from Windows clients
Hello,
We are facing the ORA-12571 error while creating / replacing packages from Windows Clients connected to a 8.1.7.2.0 db on a Solaris server.
However, there are
1. no errors in connecting and creating transactions from a Sql session
2. no errors in creating / replacing unwrapped/wrapped small (few lines) packages
3. no errors in connecting from a Unix session (remote telnet sessions inclusive).
This happens only when creating wrapped/unwrapped packages, source code of which is greater than 500 kb approx.
Can somebody help me resolve this issue. Any Help would be greatly appreciated.
Regards.
Lakshmanan, KUpdate: I had unintentionally left my custom tablespace in READONLY state after an earlier experiment with transportable tablespaces. After putting the tablespace back into READ WRITE mode and creating a new template, I was successfully able to create a new db from the template.
I'm still a little curious why this procedure wouldn't work properly with a READONLY tablespace, however.
Ben -
I cant under this error , plz explain step by step
for object rf_beleg 2012,number range internal 49 does not exist fbn1 ?
how to salve the this error , plz explain to me step by step , send me mailhis question is:
Can any one explain step by step clearly how to proceed with the given points when im setting up of multiple homes.
I can supply my Paypal account if you want me to do the work for you. -
hello
we are getting above error connecting to remote sites since last week.
this was working fine one month ago
we have our system on winn 2000 service pack 3 & oracle9i installed on it .
any suggestions
thanxHi,
I advise you to read metalink note 156483.1 - ORA-12571 when running SVRMGRL or SQL*Plus locally on Windows Server.
Solution :
Edit the Server's sqlnet.ora file (located in the Oracle_Home\Network\Admin directory or where the TNS_ADMIN Environment variable is set)and remove/comment out the following line:
sqlnet.authentication_services = (NTS)
Nicolas. -
ORA-12571 --- Error while compiling any package body...
Recently I am having this error when I try to compile a pacakge body it terminates my oracle session and my SQLPlus on windows NT generates a application error and shuts down. When I compile the same package body from a unix box it just goes fine. Do any of you guys encountered any similar things like this, please share your findings. I have attached the error message in the end of the message for further information.
Thanks
Divakar.R
SQL> @C:\Divakar\FEA_SSR_AUTO.SQL
Input truncated to 1 characters
CREATE OR REPLACE Package Body FEA_SSR_Auto Is
ERROR at line 1:
ORA-12571: TNS:packet writer failure
ORA-24323: value not allowed
Error accessing package DBMS_APPLICATION_INFO
ERROR:
ORA-03114: not connected to ORACLE
nullif you look into sql.bsq in your oracle_home/rdbms
directory, table IDL_UB2$ has storage parameter
extents defined as maxextents.
check out the parameter of your IDL_UB2$ table.
By the way what is your oracle version?
For a long time, modifying the sql.bsq file was
frowned upon, but there is a section in the Tuning
guide about modifying this file now.
Reference chapter 15.
Jaffar
Message was edited by:
The Human FlyBut why do you need to modify the sql.bsq file when this problem can be analyzed by checking the availability of free space in SYSTEM tablespace.
And what benefit will you get by modifying this file after the database has been already created?
This file is the seed of the database and I think careful consideration must be taken before even thinking of touching this file. Also you must be fully aware of the aftermath. -
Ora - 00600 error plz help urgent
hello all sir plz. help would should i do.
by mistake i made changes in spfile file.... after that i got this error
any solution ?
plz. help sir
SQL> create pfile from spfile;
create pfile from spfile
ERROR at line 1:
ORA-00600: internal error code, arguments: [733], [538970164], [pga heap], [],
help sir
waiting for replyfirst of all
thanx for my reply
sir i have bkp through rman but when i am connect to rman it give me error
2. i have no pfile<sid>.ora file
3. i try to start my database through pfile text file i got error..
plz. reply sir what should i do.....
how can i connect rman....
C:\>set oracle_sid=db01
C:\>rman target sys/oracle@db01
Recovery Manager: Release 10.1.0.2.0 - Production
Copyright (c) 1995, 2004, Oracle. All rights reserved.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00554: initialization of internal recovery manager package failed
RMAN-04005: error from target database:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
C:\>
again thanx.
i have full database bkp through rman. -
'ORA-12571: TNS:packet writer failure' error while calling procedure from VC++
hi all,
i am writing stored procedures and calling these from vc++. I have one stored procedure in that all
in and out perameters are numeric. When i am calling these procedure i am able to get the values properly. But in another procedure one in perameter is varchar and one out perameter is varchar. When i am calling these procedure from vc++ the error i am getting is "ORA-12571: TNS:packet writer failure". I test my vc++ code on different computers but its giving the same errors. I think ora-12571 error is when i can't communicate with oracle. But other stored procedures(in and out perameters are numbers) and sql statements are running properly. Only these stored procedure which has in and out perameters as varchar is giving me the above said problem. My out perameter in this procedure strtax is of type varchar and the length 100. Is it the problem. Please suggest me how to over come this problem.
thanks in advance,
with regards
vali.Hi
We recently changed our load balancer to a new load balancer. we get this error only after the load balancer change.
When the error occurs, I could see ORA-12571 error message only in the application error log. The listener.log has only the following message about TNS 12502. It does not have any message about ORA -12571.
TNS-12502: TNS:listener received no CONNECT_DATA from client
12-MAR-2010 12:23:26 * (CONNECT_DATA=(SERVICE_NAME=AppName)(CID=(PROGRAM=c:\wind ows\system32\inetsrv\w3wp.exe)(HOST=WEB02)(USER=NETWORK?SERVICE))) * (ADDRESS=(PROTOCOL=tcp)(HOST=172.x.x.x.x)(PORT=2202)) * establish * AppName * 0
12-MAR-2010 12:23:26 * (CONNECT_DATA=(SERVICE_NAME=AppName)(CID=(PROGRAM=c:\wind ows\system32\inetsrv\w3wp.exe)(HOST=WEB02)(USER=NETWORK?SERVICE))) * (ADDRESS=(PROTOCOL=tcp)(HOST=172.x.x.x.x)(PORT=2203)) * establish * AppName * 0
12-MAR-2010 12:23:26 * (CONNECT_DATA=(SERVICE_NAME=AppName)(CID=(PROGRAM=c:\wind ows\system32\inetsrv\w3wp.exe)(HOST=WEB02)(USER=NETWORK?SERVICE))) * (ADDRESS=(PROTOCOL=tcp)(HOST=172.x.x.x.x)(PORT=2204)) * establish * AppName * 0
12-MAR-2010 12:24:09 * 12502
TNS-12502: TNS:listener received no CONNECT_DATA from client
Thanks
Ashok -
ORA-12571: TNS:packet writer failure while calling procedure from VC++
hi all,
i am writing stored procedures and calling these from vc++. I have one stored procedure in that all
in and out perameters are numeric. When i am calling these procedure i am able to get the values properly. But in another procedure one in perameter is varchar and one out perameter is varchar. When i am calling these procedure from vc++ the error i am getting is "ORA-12571: TNS:packet writer failure". I test my vc++ code on different computers but its giving the same errors. I think ora-12571 error is when i can't communicate with oracle. But other stored procedures(in and out perameters are numbers) and sql statements are running properly. Only these stored procedure which has in and out perameters as varchar is giving me the above said problem. My out perameter in this procedure strtax is of type varchar and the length 100. Is it the problem. Please suggest me how to over come this problem.
thanks in advance,
with regards
vali.hi,
thanks for reply,
I wanna let u know that this is my personal lappy & i have installed apps dump on it in Linux & connect it through VM player in Window environment. I have recently purchased a new Antivirus K7 & installed it on my Lappy. i wanna know does this impact your application or Dbase Bcoz the application is running fine after starting the services in linux.
The only thing is that i am not able access the database through TOAD or SQL*Plus. the same error i am facing in both.
So
shud i uninstall the antivirus on this And this is the only solution to it ?
If yes, then how do i fix it again when i'll reinstall it Bcoz i need Antivirus as well.
kindly suggest.
thanks
D -
My programming just do some opertion of selecting and updating frequently.When the programme ran for 7-10days there occured ORA-12571 error first followed by several ORA-01041 errors.
Please help me! Very urgent...ORA-12571 indicates a broken connection between the Oracle client and the server. This could be (as Justin points out) due to a temporary network glitch or due to the death of a server process. In either case, the client side marks the connection as broken and in this case has cleaned up the assosciated data structures. Further operations return ORA-1041 as as result.
The only option at this point is to reestablish the connection to the server from your application or restart the application. Check any kind of memory leak, handle leak, etc. especially when you have a long running process. -
Help - Newbie - getting "ORA-12571: TNS: packet writer failure" ERROR
Hi all,
Not sure where to post this, so trying for the general forum to start...
I have also searched and read all the forums for help on this already as well the Oracle documentation and anything I could find from several on-line searches, etc.
I have Oracle 8i Enterprise Edition and Oracle Forms 6i installed on Win2K. Everything worked fine when it was just Oracle 8i running, ie: connecting to the database in SQLPlus Worksheet, but when I try and connect to the database in the datablock wizard in forms I get the ORA-12571: TNS: packet writer failure error!
Don't tell me to re-install, I've done that like 6 times already. I've check the tnsnames.ora files and tried that fix already. I don't know what else to try short of fdisk and redoing everything from scratch again, but I don't have time for that as this machine is used daily for other tasks.
Any help or suggestions are appreciated!!!
Thx in advance!
Michelle.
PS: Note to Oracle support staff if you are listening (pardon the pun). Your one line of help for ORA-12571 in the existing support files is rather similar to the Hitchhikers Guide to the Galaxy's info for Earth... After seeing how many people have posted about this problem and how few resources or real answers there are out there, you might want to consider updating the info on this error, because is deserves something more than "mostly harmless"!This question probably best belongs on the General database forum.
-
ORA-12008: error in materialized view refresh path ;;; PLZ HELP ME
Hi all,
I 'm using Oracle Database 10g Enterprise Edition Release 10.2.0.1.0; I got these errors when I tried to refresh my materialized view ;
ORA-12008: error in materialized view refresh path
ORA-01555: snapshot too old: rollback segment number 5 with name "_SYSSMU5$"
too small
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2255
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2461
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2430
I don't understand what mean these errors and why i got them?
Someone can help me please ?
Thanks
regards,thank you Justin,
I found in my alertDB.log this line ;
Mon Aug 20 03:00:54 2007
ORA-01555 caused by SQL statement below (SQL ID: 64a7sdbbvknta, Query Duration=1021 sec, SCN: 0x0004.4a145344):
Mon Aug 20 03:00:54 2007
INSERT /*+ BYPASS_RECURSIVE_CHECK */ INTO "MANAGEMENT"."MVIEW_COMPUTERS"("ID","WINVERSION","ANTIVIRUS","GUID","INSTALLDT","CONNECTION_TYPE","GROUPID
","QUOVACOUNTRY") SELECT "C"."ID","C"."WINVERSION","C"."ANTIVIRUS","C"."GUID","C"."INSTALLDT","C"."CONNECTIONTYPE","C"."GROUPID","C"."QUOVACOUNTRY"
FROM "MANAGEMENT"."COMPUTERS" "C"
So i execute this query to found the TUNED_UNDORETENTION value ;
SELECT *
FROM V$UNDOSTAT v
WHERE v.MAXQUERYID = '64a7sdbbvknta'
and i have this result :
BEGIN_TIME 20070820 02:53:42
END_TIME 20070820 03:03:42
UNDOTSN 1
UNDOBLKS 51242
TXNCOUNT 5012
MAXQUERYLEN 1060
MAXQUERYID 64a7sdbbvknta
MAXCONCURRENCY 21
UNXPSTEALCNT 0
UNXPBLKRELCNT 0
UNXPBLKREUCNT 0
EXPSTEALCNT 14
EXPBLKRELCNT 51392
EXPBLKREUCNT 0
SSOLDERRCNT 1
NOSPACEERRCNT 0
ACTIVEBLKS 606920
UNEXPIREDBLKS 19896
EXPIREDBLKS 612728
TUNED_UNDORETENTION 1841
I don't know exactly which value i should set my parameter?
Message was edited by:
HAGGAR -
ORA-12571-TNS: PACKET WRITER FAILURE
Hi All,
am using oracle 6i and facing this problem when am connecting Forms to Database..
Error Encounterd:ORA-12571-TNS: PACKET WRITER FAILURE.
Plz help.
Regards,
Nehathis error usually network problem..... i googled it found some solutions try
his is usually due to an improper sqlnet.ora setting. Here are some possible causes and remedies:
** Loose network cables. This error has been observed when there was a loose cable connection to the SCSI disk array (on an Oracle Parallel Server system). Related errors were also subsequently noted in the NT event log.*
** IP address conflict (Oracle 9.0.1).*
** Authentication services. One solution is to edit the sqlnet.ora file and change the line:*
SQLNET.AUTHENTICATION_SERVICES= (NTS)
to
SQLNET.AUTHENTICATION_SERVICES= (NONE)
After saving the updated file, he was able to hit the retry button on the install and the creation of the database succeeded. -
Ora-00604:error occurred at recursive SQL level 1 and Ora-04023
hi all
i am using oracle linux 5.5 and oracle Database 11g R2 while shutingdown the database i am getting
the following errors.
SQL> shutdown immediate;
Ora-00604:error occurred at recursive SQL level 1
Ora-04023: object select count(*) from reg$SQL>plz can anyone help me out?Couple of questions related to this issue:
1.Is there anything in alert log. Post last 50 lines from alert log.
2.Is there any trace / log generated by Oracle ?
3.What is Memory_Target parameter value ?
4.What is value of statistics_level parameter ?
5.Did you perform any failed upgradation ?
6.Are there any invalid objects in database ?
Generally ORA-00604 is related to insufficient size of shared pool. Now, i am googling how to get a proper value of shared pool size ? I got that there is a view v$shared_pool_advice which will tell me the answer of this question. Ok, it means now question is how do i get the proper value of shared pool from v$shared_pool_advice; i mean how do i interpret this v$shared_pool_advice view ?
No problem docs are there to answer this question : (How i got this link ? Open a new page---http://tahiti.oracle.com---selected 11.2 docs--in the left hand sided there is a search text box i entered v$shared_pool_advice and i got couple of links)
http://download.oracle.com/docs/cd/E11882_01/server.112/e17110/dynviews_3037.htm#REFRN30239
I will read these links and now i will query this and DBA_HIST_SHARED_POOL_ADVICE views, interpret the values. Ok, but what about my original question i.e. ORA-00604 and 4023 ? If i am at this stage, understood all the values, it means now i can understand the meaning / sense of resizing of shared pool.
ALTER SYSTEM SET statistics_level=TYPICAL SCOPE=SPFILE;
You can monitor V$SGA_RESIZE_OPS to identify the range of values that Oracle is automatically resizing the DB_CACHE_SIZE and SHARED_POOL_SIZE components to. Then, pick an appropriate minimum value based on the range. There's no "magic formula". But V$SGA_RESIZE_OPS shows the sizes that Oracle has been automatically been resizing the SGA components to. The Buffer Cache Advisory section of the AWR report or V$DB_CACHE_ADVICE, V$SHARED_POOL_ADVICE, V$SGA_TARGET_ADVICE and DBA_HIST_SGA_TARGET_ADVICE are views that provide advisory information as well. Hemant @ SGA_MAX_SIZE and SGA_TARGET how to set minimum for pools
So, these are the baby steps if i ever gets ORA-00604 and ORA-04023 on my test database. Do all these and feel free to post the next doubt, i am sure you will get the correct answer.
Regards
Girish Sharma -
Ora-00604 error while taking tkprof of a trace file
Sorry i am giving the full erro but omitting exact table names
Hi ,
I have an error while taking tkprof of a trace file.
I gave the following command ---
tkprof <source.trc> <file.prc> sys=no sort=exeela,fchela,prsela explain= /
error is --
Error in create table of EXPLAIN PLAN table : unix_session_user.prof$paln_table
ORA-00604: error occurred at recursive SQL level 1
ORA-20001: Step-6:DDL
Event Security. You are not permitted to perform the requested structural
changes to PROF (TABLE)
Event triggered : CREATE
ora_login_user
(session_user) : unix_session_user(dummy)
Search : select count(*) from
tabl(dummy table name) where obj_name like '%\%%' escape '\' and obj_type =
'TABLE' and obj_type = 'USER' and ( event_CREATE = 'Y' or status =
'Override')
ORA-06512: at line 162
ORA-06510: PL/SQL: unhandled
user-defined exception
EXPLAIN PLAN option disabled.
i searched for the error and in oracle forum i found a solution .. http://forums.oracle.com/forums/thread.jspa?threadID=844287&tstart=0
but after giving the table option it is giving the same error
tkprof <source.trc> <file.prc> sys=no sort=exeela,fchela,prsela table=old_schema.plan_table explain= /
it again gave the same error.
In both two cases it gives elapsed time results,library cache missing etc but before giving this it throws ORA-00604 error as stated above
then i again correct the tkprof statement ..
tkprof <source.trc> <file.prc> sys=no sort=exeela,fchela,prsela table=new_schema.plan_table explain= /
say this schema name here i used is dummy schema name.
My question is did this error came as we had not sufficient previlages in the old_schema but that previleges we have in new_schema?
My databse version is 9.2.0.4.0
Thanks in advance
Edited by: bp on Feb 3, 2009 11:36 PM
Edited by: bp on Feb 3, 2009 11:40 PMPlease post here full error message, there should be lines with ORA-00604 and then some other ORA as well.
And are there any trace files generated during this error?
And as You can see from error description, probably You will have to contact with Oracle support in order to solve this case:
oerr ora 00604
00604, 00000, "error occurred at recursive SQL level %s"
// *Cause: An error occurred while processing a recursive SQL statement
// (a statement applying to internal dictionary tables).
// *Action: If the situation described in the next error on the stack
// can be corrected, do so; otherwise contact Oracle Support. -
Ora-00604 error while runing script
Hi Guys..
Let me describe the environment
My OS is windows 2008 R2 server 64-bit.. Database version is Oracle 11gR2
I recently upgraded the oracle DB from 11gr1 to 11gr2 .It upgraded successfully without any errors and the updated DB on 11gr2 is working fine..
Now one of the employee is getting below errror while executing a script which calles a plsql package.
ORA-00604: error occurred at recursive SQL level 1
ORA-00001: unique constraint (SYS.I_PLSCOPE_SIG_IDENTIFIER$) violated
I googled around and found that its related to plscope_settings parameter..
select name,value from v$parameter where name = 'plscope_settings';
the output was IDENTIFIERS:NONE
Further investigations revealed that my DB is running with the (default) init-parameter “plscope_settings=IDENTIFIERS:NONE”, while my SQL-Developer (v3.0) started every session with the default-setting “plscope_settings=IDENTIFIERS:ALL” (see menu EXTRAS>PREFERENCES>DATABASE>PL/SQL-COMPILER).
so i changed the settings to NONE in Sql Developer too..then recompiled the package but the error is still there when i execute the same package..
Its high time..i need to resolve it over the weekend..so can u plz share ur valuable comments..
Let me if u want any info from my end so that u get more clearer about the prob...sai121 wrote:
Hi Guys..
Let me describe the environment
My OS is windows 2008 R2 server 64-bit.. Database version is Oracle 11gR2
I recently upgraded the oracle DB from 11gr1 to 11gr2 .It upgraded successfully without any errors and the updated DB on 11gr2 is working fine..
Now one of the employee is getting below errror while executing a script which calles a plsql package.
ORA-00604: error occurred at recursive SQL level 1
ORA-00001: unique constraint (SYS.I_PLSCOPE_SIG_IDENTIFIER$) violated
I googled around and found that its related to plscope_settings parameter..
select name,value from v$parameter where name = 'plscope_settings';
the output was IDENTIFIERS:NONE
Further investigations revealed that my DB is running with the (default) init-parameter “plscope_settings=IDENTIFIERS:NONE”, while my SQL-Developer (v3.0) started every session with the default-setting “plscope_settings=IDENTIFIERS:ALL” (see menu EXTRAS>PREFERENCES>DATABASE>PL/SQL-COMPILER).
so i changed the settings to NONE in Sql Developer too..then recompiled the package but the error is still there when i execute the same package..
Its high time..i need to resolve it over the weekend..so can u plz share ur valuable comments..
Let me if u want any info from my end so that u get more clearer about the prob...
bcm@bcm-laptop:~$ oerr ora 1
00001, 00000, "unique constraint (%s.%s) violated"
// *Cause: An UPDATE or INSERT statement attempted to insert a duplicate key.
// For Trusted Oracle configured in DBMS MAC mode, you may see
// this message if a duplicate entry exists at a different level.
// *Action: Either remove the unique restriction or do not insert the key.
Maybe you are looking for
-
Website works on a mac, has problems on a pc
hello - i recently published a website and it looks fine on my mac but is not working on pc's. when the page loads on a pc, the page comes up for a split second how it looks on my mac - but then it snaps back to two main problems: 1. any image on a p
-
Purchase order from production order !! (Missing material no)
Hi, This purchase order is created directly from production order.( My problem is the material number is no where shown on PO. but when I print it (print preview) i can see the material number along with the Production order number. I am writing a ne
-
Hi, I can't figure out why I can't render on my timeline. I highlight the segment hit "Apple-R" and it gives me a weird message about "conforming HDV video...." and the bar goes as far as 60-66% and holds there forever. It never renders even partiall
-
Error when copying code from one file to another
This bit of code works perfectly well in a test file with a single button: var link:URLRequest=new URLRequest("http://www.mywebsite.ca"); buttonName.addEventListener(MouseEvent.CLICK, onClick); function onClick(event:MouseEvent):void{ navigateToURL(l
-
Help - Password reset on a MacBook after installing OS X Mountain Lion
I recently purchased OS X Mountian Lion for my old MacBook. I learned that my password no longer workerd. How can I reset my notebook password? I have not been able to even use Lion. I want to purchase a MacBook Pro... but thought I would try a softw