ORA-12571 --- Error while compiling any package body...

Recently I am having this error when I try to compile a pacakge body it terminates my oracle session and my SQLPlus on windows NT generates a application error and shuts down. When I compile the same package body from a unix box it just goes fine. Do any of you guys encountered any similar things like this, please share your findings. I have attached the error message in the end of the message for further information.
Thanks
Divakar.R
SQL> @C:\Divakar\FEA_SSR_AUTO.SQL
Input truncated to 1 characters
CREATE OR REPLACE Package Body FEA_SSR_Auto Is
ERROR at line 1:
ORA-12571: TNS:packet writer failure
ORA-24323: value not allowed
Error accessing package DBMS_APPLICATION_INFO
ERROR:
ORA-03114: not connected to ORACLE
null

if you look into sql.bsq in your oracle_home/rdbms
directory, table IDL_UB2$ has storage parameter
extents defined as maxextents.
check out the parameter of your IDL_UB2$ table.
By the way what is your oracle version?
For a long time, modifying the sql.bsq file was
frowned upon, but there is a section in the Tuning
guide about modifying this file now.
Reference chapter 15.
Jaffar
Message was edited by:
The Human FlyBut why do you need to modify the sql.bsq file when this problem can be analyzed by checking the availability of free space in SYSTEM tablespace.
And what benefit will you get by modifying this file after the database has been already created?
This file is the seed of the database and I think careful consideration must be taken before even thinking of touching this file. Also you must be fully aware of the aftermath.

Similar Messages

ORA-12571 error while creating packages from Windows clients

Hello,
We are facing the ORA-12571 error while creating / replacing packages from Windows Clients connected to a 8.1.7.2.0 db on a Solaris server.
However, there are
1. no errors in connecting and creating transactions from a Sql session
2. no errors in creating / replacing unwrapped/wrapped small (few lines) packages
3. no errors in connecting from a Unix session (remote telnet sessions inclusive).
This happens only when creating wrapped/unwrapped packages, source code of which is greater than 500 kb approx.
Can somebody help me resolve this issue. Any Help would be greatly appreciated.
Regards.
Lakshmanan, K

Update: I had unintentionally left my custom tablespace in READONLY state after an earlier experiment with transportable tablespaces. After putting the tablespace back into READ WRITE mode and creating a new template, I was successfully able to create a new db from the template.
I'm still a little curious why this procedure wouldn't work properly with a READONLY tablespace, however.
Ben

ORA-27092 Error while executing any query from client

Hello
I am getting following error while executing any query from client remotly.
IAMDBA@TEST_OAT.ABCD > select userid from dual;
select userid from dual
ERROR at line 1:
ORA-00604: error occurred at recursive SQL level 1
ORA-01116: error in opening database file 1
ORA-01110: data file 1: '/u01/prod/system/system01.dbf'
ORA-27092: size of file exceeds file size limit of the process
Additional information: 131071
Additional information: 286209
But while local connection,its working.

hi,
ulimit command- Limit user resources
su - oracle
ulimit -n (this command will show you the current value for ulimit the default value is 1024)
to increase its value:---
ulimit -n <some value> ( this command will change value for current session only)
example
ulimit -n 101062
once done check the value as:--
ulimit -n( for verification)
search in google for more explanation or revert back to me for any suggestions.... :)
Edited by: varun4dba on Jan 31, 2011 4:09 PM

EA 3.0 returns error on compiling of package body

Hi,
I got the following error
Error: ORA-06550: line 1, column 64:
PLS-00172: string literal too long
when I was trying to compile package body.
In previous version of SQL DEV the package is compiled without any problems.
I have a procedure in package with more than 120 parameters.
Edited by: user635344 on Oct 15, 2010 10:54 AM

This problem is a bug : SQL*Developer 3EA1 - Not Compiling package Body
regards Karsten

Error While compiling a Package

Hi,
When am compiling a package am getting a error like
ERROR at line 1:
ORA-00604: error occurred at recursive SQL level 1
ORA-01631: max # extents (505) reached in table SYS.IDL_UB2$
Can you pls any one help in this reg...
Thanks,
Adhi...

if you look into sql.bsq in your oracle_home/rdbms
directory, table IDL_UB2$ has storage parameter
extents defined as maxextents.
check out the parameter of your IDL_UB2$ table.
By the way what is your oracle version?
For a long time, modifying the sql.bsq file was
frowned upon, but there is a section in the Tuning
guide about modifying this file now.
Reference chapter 15.
Jaffar
Message was edited by:
The Human FlyBut why do you need to modify the sql.bsq file when this problem can be analyzed by checking the availability of free space in SYSTEM tablespace.
And what benefit will you get by modifying this file after the database has been already created?
This file is the seed of the database and I think careful consideration must be taken before even thinking of touching this file. Also you must be fully aware of the aftermath.

Ora-04021 error while compiling a stored procedure

Hi Gurus,
I am getting a ora-04021 timeout error while trying to compile a stored procedure. My Oracle version is 9i on Unix.
Thanks
Amitava.

amitavachatterjee1975 wrote:
Hi Gurus,
I am getting a ora-04021 timeout error while trying to compile a stored procedure. My Oracle version is 9i on Unix.
Thanks
Amitava.
my car won't go.
tell me how to make my car go.
How do I ask a question on the forums?
https://forums.oracle.com/forums/thread.jspa?threadID=2174552#9360002
[oracle@localhost ~]$ oerr ora 4021
04021, 00000, "timeout occurred while waiting to lock object %s%s%s%s%s"
// *Cause: While waiting to lock a library object, a timeout occurred.
// *Action: Retry the operation later.
[oracle@localhost ~]$

Internal error while compiling a package

When I update a view within from a pulic procedure the package compiles without any issue. However If I make the same procedure as private(no declartion in specifcation)
the package gives an internal error

What Oracle version?
Please give the code and the error message.

Help! ORA-03113 while compiling certain packages!

Hello everyone
Recently we migrated our PLSQL code from Oracle 8.1.7.0 to 9.2.0.4.
While compiling our packages in 9i, we are getting the ORA-03113: end-of-file on communication channel error.
This happens only when we compile two particular packages.
And then when we connect again immediately, and recompile the same package, it gets compiled.
This is only happening for two packages, frequently. All other packages are not giving this error.
Why could this be happening? Any pointers to this would really help.
Thanks
Bob

ORA-3113 often throws a .TRC file in the USER_DUMP_DEST directory. That might give you a clue.
Cheers, APC

Exiting from sqlplus when there is any errors while compiling pl/sql progra

I am connecting to sqlplus from unix and I am executing a pl/sql script . Now if I get some error while compiling a procedure, package, function or any sql statement I want to exit sqlplus.
whenever sqlerror works only for sql statements but not for plsql
I dont want to query user_errors table and then throw some exception depending on the same .
Is there any command available or any easier way to solve this problem ?

Those errors we get only when there is conflict in same etc.
Now consider the example here
sample.sql
whenever sqlerror exit failure ;
declare
        s1 long;
begin
        s1 := 'create or replace procedure proc1 as '||
          'declare '||
          'begin '||
              'end; '||
          'end;';
        execute immediate s1;
end;
select 1 from dual;When I run the script
SQL> @sample.sql
ERROR:
ORA-24344: success with compilation error
ORA-06512: at line 9
Warning: PL/SQL compilation errors.
         1
         1Actually I want to get out before it executes select means once it throws error in pl/sql.

[SOLVED] Strange error while compiling packages via AUR

I've been facing this error while compiling packages via AUR. I'm also posting the output of my /etc/makepkg.conf
Error
==> Starting build()...
checking for a BSD-compatible install... /bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether cc supports -O2... yes
checking for g++... g++
checking whether the C++ compiler works... yes
checking for C++ compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking for style of include used by make... GNU
checking dependency style of g++... gcc3
checking for gcc... gcc
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking dependency style of gcc... gcc3
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for GSTREAMER... yes
checking for GSTREAMER_GTK... yes
checking for XOpenDisplay in -lX11... yes
checking for ncursesw5-config... /usr/bin/ncursesw5-config
checking for initscr in -lncurses... yes
checking whether gcc supports -Wall... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating docs/Makefile
config.status: creating config.h
config.status: executing depfiles commands
fatal: Not a git repository (or any of the parent directories): .git
CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/sh /tmp/yaourt-tmp-hellknight/aur-gst123/src/gst123-0.2.0/build-aux/missing --run aclocal-1.11 -Wno-portability
sh: autom4te: command not found
aclocal-1.11: autom4te failed with exit status: 127
make: *** [aclocal.m4] Error 1
==> ERROR: A failure occurred in build().
Aborting...
==> ERROR: Makepkg was unable to build gst123.
==> Restart building gst123 ? [y/N]
==> -------------------------------
==>
/etc/makepkg.conf
# /etc/makepkg.conf
# SOURCE ACQUISITION
#-- The download utilities that makepkg should use to acquire sources
# Format: 'protocol::agent'
DLAGENTS=('ftp::/usr/bin/wget -c --passive-ftp -t 3 --waitretry=3 -O %o %u'
'http::/usr/bin/wget -c -t 3 --waitretry=3 -O %o %u'
'https::/usr/bin/wget -c -t 3 --waitretry=3 --no-check-certificate -O %o %u'
'rsync::/usr/bin/rsync -z %u %o'
'scp::/usr/bin/scp -C %u %o')
# Other common tools:
# /usr/bin/snarf
# /usr/bin/lftpget -c
# /usr/bin/curl
# ARCHITECTURE, COMPILE FLAGS
CARCH="x86_64"
CHOST="x86_64-unknown-linux-gnu"
#-- Exclusive: will only run on x86_64
# -march (or -mcpu) builds exclusively for an architecture
# -mtune optimizes for an architecture, but builds for whole processor family
CFLAGS="-march=amdfam10 -mtune=generic -O2 -pipe"
CXXFLAGS="${CFLAGS}"
LDFLAGS="-Wl,--hash-style=gnu -Wl,--as-needed"
#-- Make Flags: change this for DistCC/SMP systems
MAKEFLAGS="-j8"
# BUILD ENVIRONMENT
# Defaults: BUILDENV=(fakeroot !distcc color !ccache)
# A negated environment option will do the opposite of the comments below.
#-- fakeroot: Allow building packages as a non-root user
#-- distcc: Use the Distributed C/C++/ObjC compiler
#-- color: Colorize output messages
#-- ccache: Use ccache to cache compilation
BUILDENV=(fakeroot !distcc color !ccache)
#-- If using DistCC, your MAKEFLAGS will also need modification. In addition,
#-- specify a space-delimited list of hosts running in the DistCC cluster.
#DISTCC_HOSTS=""
# GLOBAL PACKAGE OPTIONS
# These are default values for the options=() settings
# Default: OPTIONS=(strip docs libtool emptydirs zipman purge)
# A negated option will do the opposite of the comments below.
#-- strip: Strip symbols from binaries/libraries in STRIP_DIRS
#-- docs: Save doc directories specified by DOC_DIRS
#-- libtool: Leave libtool (.la) files in packages
#-- emptydirs: Leave empty directories in packages
#-- zipman: Compress manual (man and info) pages in MAN_DIRS with gzip
#-- purge: Remove files specified by PURGE_TARGETS
OPTIONS=(strip docs libtool emptydirs zipman purge)
#-- File integrity checks to use. Valid: md5, sha1, sha256, sha384, sha512
INTEGRITY_CHECK=(md5)
#-- Options to be used when stripping binaries. See `man strip' for details.
STRIP_BINARIES="--strip-all"
#-- Options to be used when stripping shared libraries. See `man strip' for details.
STRIP_SHARED="--strip-unneeded"
#-- Options to be used when stripping static libraries. See `man strip' for details.
STRIP_STATIC="--strip-debug"
#-- Manual (man and info) directories to compress (if zipman is specified)
MAN_DIRS=({usr{,/local}{,/share},opt/*}/{man,info})
#-- Doc directories to remove (if !docs is specified)
DOC_DIRS=(usr/{,local/}{,share/}{doc,gtk-doc} opt/*/{doc,gtk-doc})
#-- Directories to be searched for the strip option (if strip is specified)
STRIP_DIRS=(bin lib sbin usr/{bin,lib,sbin,local/{bin,lib,sbin}} opt/*/{bin,lib,sbin})
#-- Files to be removed from all packages (if purge is specified)
PURGE_TARGETS=(usr/{,share}/info/dir .packlist *.pod)
# PACKAGE OUTPUT
# Default: put built package and cached source in build directory
#-- Destination: specify a fixed directory where all packages will be placed
#PKGDEST=/home/packages
#-- Source cache: specify a fixed directory where source files will be cached
#SRCDEST=/home/sources
#-- Source packages: specify a fixed directory where all src packages will be placed
#SRCPKGDEST=/home/srcpackages
#-- Packager: name/email of the person or organization building packages
#PACKAGER="John Doe <[email protected]>"
# EXTENSION DEFAULTS
# WARNING: Do NOT modify these variables unless you know what you are
# doing.
PKGEXT='.pkg.tar.xz'
SRCEXT='.src.tar.gz'
# vim: set ft=sh ts=2 sw=2 et:
Last edited by tarun.hellknight (2011-04-12 15:45:26)

That's strange... it wasn't installed.. although I had never,ever faced a problem while compiling packages via AUR.. maybe, I should be careful when uninstalling orphans.. thanks for the help..

Help required in compilation of package body.....

Hi ..
While taking the export i encounter the error message..
. exporting synonyms
. exporting views
. exporting stored procedures
. exporting operators
. exporting referential integrity constraints
. exporting triggers
EXP-00056: ORACLE error 6550 encountered
ORA-06550: line 1, column 26:
PLS-00201: identifier 'XDB.DBMS_XDBUTIL_INT' must be declared
ORA-06550: line 1, column 14:
PL/SQL: Statement ignored
EXP-00056: ORACLE error 6550 encountered
ORA-06550: line 1, column 26:
PLS-00201: identifier 'XDB.DBMS_XDBUTIL_INT' must be declared
ORA-06550: line 1, column 14:
PL/SQL: Statement ignored
EXP-00000: Export terminated unsuccessfully..
SELECT status,object_id,object_type,owner,object_name
FROM dba_objects
WHERE object_name = 'DBMS_XDBUTIL_INT';
gives the output as...
status object type owner object_name
valid synonym public DBMS_XDBUTIL_INT
valid package xdb DBMS_XDBUTIL_INT
invalid package body xdb DBMS_XDBUTIL_INT
when i try to compile the invalid object...
SQL> alter package XDB.DBMS_XDBUTIL_INT COMPILE BODY;
Warning: Package Body altered with compilation errors.
SQL> sho err
Errors for PACKAGE BODY XDB.DBMS_XDBUTIL_INT:
LINE/COL ERROR
61/7 PL/SQL: Statement ignored
61/17 PLS-00306: wrong number or types of arguments in call to
'IS_HIERARCHY_ENABLED_INTERNAL'
74/7 PL/SQL: Statement ignored
74/29 PLS-00302: component 'GENERATE_TRGNM' must be declared
108/9 PL/SQL: Statement ignored
108/37 PLS-00302: component 'TRUNCATE_NAME' must be declared
123/7 PLS-00201: identifier 'SYS.DBMS_SYS_SQL' must be declared
123/7 PL/SQL: Statement ignored
135/9 PL/SQL: Statement ignored
LINE/COL ERROR
135/37 PLS-00302: component 'TRUNCATE_NAME' must be declared
153/9 PL/SQL: Statement ignored
153/33 PLS-00302: component 'TRUNCATE_NAME' must be declared
168/7 PLS-00201: identifier 'SYS.DBMS_SYS_SQL' must be declared
168/7 PL/SQL: Statement ignored
181/9 PL/SQL: Statement ignored
181/33 PLS-00302: component 'TRUNCATE_NAME' must be declared
Since the code is wrapped .. i cant do anything.. needs ur help.
sorry for explaining in such a detail...
Message was edited by:
437022

Hi,
In side the Package Body,
a) invalid arguments for IS_HIERARCHY_ENABLED_INTERNAL
b) invalid components GENERATE_TRGNM, etc.
First, you need to correct the above errors and then
try to compile the Package Body
Regards,
Sailaja

Error while compiling form 6i

Hi All,
I am getting Memory fault error while compiling the form.
I tried with two commands.
I executed these commands from $AU_TOP/forms/US
At first I tried with
f60gen $AU_TOP/forms/US/XXTEST.fmb apps/opopop123 output_file =$XXEEG_TOP/forms/US/XXTEST.fmx
and I got following error
Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64bit Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.8.0 - Production
PL/SQL Version 8.0.6.3.0 (Production)
Oracle Procedure Builder V6.0.8.21.0 Build #0 - Production
Oracle Virtual Graphics System Version 6.0.5.39.0 (Production)
Oracle Multimedia Version 6.0.8.25.0 (Production)
Oracle Tools Integration Version 6.0.8.17.0 (Production)
Oracle Tools Common Area Version 6.0.5.32.0
Oracle CORE Version 4.0.6.0.0 - Production
Compiling package specification APP_CUSTOM...
No compilation errors.
Compiling package body APP_CUSTOM...
Memory fault
Secondly I tried with
f60gen Module=/opt/egapmdev/ebmdappl/au/11.5.0/forms/US/XXTEST.fmb Userid=apps/opopop123 Module_Type=FORM batch=yes Output_File=XXTEST.fmx
Now the error came was only 'Memory fault' without any other messages.
Please any one look into it.

Sure,
I used two commands both are not working.
First
f60gen $AU_TOP/forms/US/XXTEST.fmb apps/opopop123 output_file =$XXEEG_TOP/forms/US/XXTEST.fmx
Second
f60gen Module=/opt/egapmdev/ebmdappl/au/11.5.0/forms/US/XXTEST.fmb Userid=apps/opopop123 Module_Type=FORM batch=yes Output_File=XXTEST.fmx
Both are not working
Error messages in first command
Forms 6.0 (Form Compiler) Version 6.0.8.28.0 (Production)
Forms 6.0 (Form Compiler): Release - Production
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Oracle9i Enterprise Edition Release 9.2.0.8.0 - 64bit Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.8.0 - Production
PL/SQL Version 8.0.6.3.0 (Production)
Oracle Procedure Builder V6.0.8.21.0 Build #0 - Production
Oracle Virtual Graphics System Version 6.0.5.39.0 (Production)
Oracle Multimedia Version 6.0.8.25.0 (Production)
Oracle Tools Integration Version 6.0.8.17.0 (Production)
Oracle Tools Common Area Version 6.0.5.32.0
Oracle CORE Version 4.0.6.0.0 - Production
Compiling package specification APP_CUSTOM...
No compilation errors.
Compiling package body APP_CUSTOM...
Memory fault
Error message in second command
Memory fault
I ran this command from
$AU_TOP/forms/us --(/opt/egapmdev/ebmdappl/au/11.5.0/forms/US)
Looking forward from you.

Error while Compilation...

While compiling a package, i am getting the below mentioned error. Any idea why this is happening?
procedure setdelvdate
as
begin
            if master_shp.rec_date > SYSDATE
            then
            update master_dis_dtl set delv_date=            --line 82
            case
                    when CUST_ORD.ORD_TYPE='*' THEN PKT_HDR.DISC_DATE
                    WHEN CUST_ORD.ORD_TYPE='UL' THEN getlastBusinessDate(sysdate)
            end
            end if; ---line 87
            if ORDER_DEF.ship_date_time<DISP_HDR.DISC_DATE
            then
            update DISP_hdr set disc_date= CUST_ORD.start_ship_date;
            end if;
end; -- line 93
procedure myproc2
end;
end mypackagename;
Error i am getting
82/3     PL/SQL: SQL Statement ignored
87/3     PL/SQL: ORA-00933: SQL command not properly ended
93/4     PLS-00103: Encountered the symbol ";" when expecting one of the
          following:
          if

Stephenson, GGS,
Thank you both very much. It was the lack of that ; that caused the problem.
Now i am facing another problem.
procedure setdelvdate
as
begin
            if master_shp.rec_date > SYSDATE -- line number 70
            then
            update master_dis_dtl set delv_date=
            case
                    when CUST_ORD.ORD_TYPE='*' THEN PKT_HDR.DISC_DATE
                    WHEN CUST_ORD.ORD_TYPE='UL' THEN getlastBusinessDate(sysdate)
            end;
            end if;
            if ORDER_DEF.ship_date_time<DISP_HDR.DISC_DATE --- line number 78
            then
            update DISP_hdr set disc_date= CUST_ORD.start_ship_date;
            end if;
end;
procedure myproc2
end;
end mypackagename;
Error i am getting
LINE/COL ERROR
70/3     PL/SQL: Statement ignored
70/19    PLS-00357: Table,View Or Sequence reference
          'MASTER_SHP.REC_DATE' not allowed in this context
78/3     PL/SQL: Statement ignored
78/21    PLS-00357: Table,View Or Sequence reference
          'ORDER_DEF.SHIP_DATE_TIME' not allowed in this contextI want to update a column in a table based on an IF condition for a column on a different table. Any workarounds for this?
Message was edited by:
C. Boutet

Error while compiling the PO Item Category KFF

Kindly help me. I am new and learning Purchasing module and now stuck because of an error while compiling the PO Item Category KFF. This is because a segment is saved in the database incompletely.
Now the segment does not show in the Segments Summary form. But when I enter the same Number, I get the error APP-FND-00924: You chose a sement number that is used by another segment.
When I freeze and compile the structure with different segments, I get the error
APP-FND-00668: The data that defines the flexfield on this field may be inconsistent. Inform your system administrator that the function: FDFRKS could not find the structure definition for the flexfield specified by Application = &APPL, Code = MCAT and Structure number = 201 (APPID=401)
APP-FND-00738: Error detected when attempting to load value set on Context: &CONTEXT for Segment: &SEGMENT in Routine: FDFBKS
APP-FND-01564: ORACLE error 1403 in FDFAVS3
Cause: FDFAVS3 failed due to ORA-01403: no data found.
The SQL statement being executed at the time of the error was: and was executed from the file &ERRFILE.
Regards
Reem

Hi Sandeep
Sorry that I am bothering with basic questions, but I am not able to run any Select queries. It gives error Table or View does not exist. I can see the table from ALL_TABLES view, but I cannot Select.
I have logged in as oracle user. This is not Vision datbase. Can you let me know the default dba user and password or how to get the permission?
Regards
Reem

Error while compiling the composite through custom ant script

Hi,
I am getting the following error while compiling the composite through custom built ant scripts which are intern call the ant-sca-package.xml. And the composite is created by upgrading the 10g bpels. But the same composite is successfully compiling from Jdeveloper (11.1.1.4).
oad of wsdl "oramds:/soa/shared/workflow/NotificationService.wsdl" failed
oracle.fabric.common.FabricException: Error in getting XML input stream: oramds:/soa/shared/workflow/NotificationService.wsdl: oracle.mds.exception.MDSException: MDS-00054: The file to be loaded oramds:/soa/shared/workflow/NotificationService.wsdl does not exist.
     at oracle.fabric.common.metadata.MetadataManagerImpl.getInputStreamFromAbsoluteURL(MetadataManagerImpl.java:280)
     at oracle.integration.platform.common.MDSMetadataManagerImpl.getInputStreamFromAbsoluteURL(MDSMetadataManagerImpl.java:555)
     at oracle.fabric.common.metadata.MetadataManagerImpl.getDocumentAsInputStream(MetadataManagerImpl.java:159)
     at oracle.integration.platform.common.MDSMetadataManagerImpl.getDocumentAsInputStream(MDSMetadataManagerImpl.java:417)
     at oracle.fabric.common.wsdl.WSDLManager.loadWSDL(WSDLManager.java:241)
     at oracle.fabric.common.wsdl.WSDLManager.loadWSDL(WSDLManager.java:304)
     at oracle.soa.scac.ValidateComposite.loadWSDLs(ValidateComposite.java:934)
     at oracle.soa.scac.ValidateComposite.doValidation(ValidateComposite.java:491)
     at oracle.soa.scac.ValidateComposite.run(ValidateComposite.java:150)
     at oracle.soa.scac.ValidateComposite.main(ValidateComposite.java:135)
Caused by: java.io.IOException: oracle.mds.exception.MDSException: MDS-00054: The file to be loaded oramds:/soa/shared/workflow/NotificationService.wsdl does not exist.
     at oracle.mds.internal.net.AbstractOraMDSURLConnection.getPDocStream(AbstractOraMDSURLConnection.java:388)
     at oracle.mds.internal.net.AbstractOraMDSURLConnection.getInputStream(AbstractOraMDSURLConnection.java:176)
     at oracle.mds.internal.net.OraMDSURLConnection.getInputStream(OraMDSURLConnection.java:67)
     at java.net.URL.openStream(URL.java:1010)
     at oracle.fabric.common.metadata.MetadataManagerImpl.getInputStreamFromAbsoluteURL(MetadataManagerImpl.java:276)
     ... 9 more
Caused by: oracle.mds.exception.MDSException: MDS-00054: The file to be loaded oramds:/soa/shared/workflow/NotificationService.wsdl does not exist.
     at oracle.mds.internal.net.AbstractOraMDSURLConnection.getPDocStream(AbstractOraMDSURLConnection.java:339)
And in the following blog, its recommended to check for the adf-config.xml. But when upgrading the bpels from 10g to 11.1.1.4, I don't see any such file created by Jdeveloper.
http://orasoa.blogspot.com/2010/08/ant-and-mds-composite-compile-error.html
Not sure if I am missing some properties to add in by custom script while compiling.
Thanks
Sree
Edited by: Sree on Jul 4, 2011 7:25 AM

Hi Hussain,
Thanks for the reply.
Were you able to compile the form at the client side successfully?
1) Were you able to compile the form at the client side successfully?:
Ans: Yes, I was able to compile the form successfully at client side.
2) Are you logged in as applmgr user? Have you sourced the application env file before compiling the form?
Ans: No, I have not logged by applmgr user, i am using my own login. Yes I have sourced the application env file before compiling the form
3) What does "echo $FORMS_PATH" return?
Ans: echo $FORMS_PATH on server gives this path
/u01/app/EBS00/apps/apps_st/appl/au/12.0.0/resource:/u01/app/EBS00/apps/apps_st/appl/au/12.0.0/resource/stub
Can you please advise?
Thanks,

ORA-12571 --- Error while compiling any package body...

Similar Messages

Maybe you are looking for