ORA-15137: cluster in rolling patch

Hello everyone,
something went wrong in patching grid 12.1.0.2 with patch: Bug 19954978 - GRID INFRASTRUCTURE PATCH SET UPDATE 12.1.0.2.2 (JAN2015) (linux 64)
And when I try to create a diskgroup I get:
ORA-15018: Diskgroup can not be created
ORA-15137: cluster in rolling patch
Although opatch lsinventory shows succeeded patching
Can someone help ?
How do I tell the clusterware to quit rolling patch ?
Please help.
Paolo

Thak you, here is what I get:
[root@ap2-oraclec01 bin]# ./crsctl query crs softwarepatch ap2-oraclec00
Oracle Clusterware patch level on node ap2-oraclec00 is [0].
[root@ap2-oraclec01 bin]# ./crsctl query crs softwarepatch ap2-oraclec01
Oracle Clusterware patch level on node ap2-oraclec01 is [0].
[root@ap2-oraclec01 bin]# ./crsctl stop rollingpatch
CRS-1170: Rejecting rolling patch mode change because the patch has not been applied yet. The software patch level [0] on this node is not the same as the expected patch level [1964077727].
CRS-4000: Command Stop failed, or completed with errors.
[root@ap2-oraclec01 bin]#

Similar Messages

ORA-12844: cluster reconfiguration in progress

Hi All,
I am getting ORA-12844: cluster reconfiguration in progress error while executing a mapping with UPDATE/INSERT option. For the first time, the mapping was executed with out any problem and loaded about 16 million records.. For the subsequent executions it is giving the above problem.
What would be the problem? please respond, if anyone came across the similar situation.
Thanks,
PR

1. Are you running against Oracle RAC? The message suggest that but we've seen this issue once before when it wasn't related to RAC (no good suggestions from that occurrence).
2. Have you ever seen this message outside the context of what you do with OWB? OWB should not do anything special that would cause this issue.
Nikolai Rochnik

How to get rolling patch 9 for tux8.0?

Hi there,
I'm installing eLink OSI TP 4.1 on top of tux8.0 and the release notes
declare that I need 'Rolling Patch 9'. Is this already in the
distribution (nt/win2k) that I downloaded, or must I get it somewheres?
I don't have a patchlev file in my tuxdir/udataobj dir.
Thanks,
Ben
PS Kindly remove 'NO_SPAM' if replying to my e-mail address.

Benjamin,
You need to open a case with BEA support, who can make the patch
available to you.
Regards,
Peter.
Benjamin D. Engelsma wrote:
Hi there,
I'm installing eLink OSI TP 4.1 on top of tux8.0 and the release notes
declare that I need 'Rolling Patch 9'. Is this already in the
distribution (nt/win2k) that I downloaded, or must I get it somewheres?
I don't have a patchlev file in my tuxdir/udataobj dir.
Thanks,
Ben
PS Kindly remove 'NO_SPAM' if replying to my e-mail address.

Rolling Patch for tuxedo 12.1.1

We have tuxedo 12.1.1 installed on RedHat Linux 5.8 (Tikanga). I would like to know if there's any latest RP available for this version ?
Thanks in advance.

Hi,
Yes, there are rolling patches for Tuxedo 12.1.1. You can get them through My Oracle Support.
Regards,
Todd Little
Oracle Tuxedo Chief Architect

Need information regarding current rolling patches for BEA MessageQ 5.0

We are using BEA MessageQ 5.0 with rolling patch 24 in our application on Sun Solaris 9 Sparc platform.
We are upgrading our infrastucture from Sun Solaris 9 to Sun Solaris 10.
As per upgrade we want to install latest rolling patch for MessageQ 5.0.
Please let me know which is latest rolling patch available for MessageQ 5 and from where I can get it.
Thanks in advance.
Edited by: user2848685 on May 18, 2009 10:57 AM

Hi,
You will need to contact Oracle Support in order to access the MessageQ rolling patches.
Regards,
Todd Little
Oracle Tuxedo Chief Architect

Cannot update rolling patch in Tuxedo 10.3

I would like to update rolling patch to latest patch
I completed in windows box but in linux box is error during i call "./install"
[tuxedo@HRIS-DEV RP097]$ $TUXDIR/bin/tmadmin -v
INFO: Oracle Tuxedo, Version 10.3.0.0, 64-bit, Patch Level (none)
[tuxedo@HRIS-DEV RP097]$ uname -a
Linux HRIS-DEV 2.6.32-220.el6.x86_64 #1 SMP Wed Nov 9 08:03:13 EST 2011 x86_64 x86_64 x86_64 GNU/Linux
[tuxedo@HRIS-DEV RP097]$ export TUXDIR=/appl/mdlware/tuxedo10gR3
[tuxedo@HRIS-DEV RP097]$ . $TUXDIR/tux.env
[tuxedo@HRIS-DEV RP097]$ ll
total 136
drwxrwxrwx 2 tuxedo psoft 4096 Nov 1 15:11 bin
-rwxrwxrwx 1 tuxedo psoft 39110 Jul 19 09:44 install
drwxrwxrwx 2 tuxedo psoft 4096 Nov 1 15:11 lib
drwxrwxrwx 6 tuxedo psoft 4096 Nov 1 15:11 locale
-rwxrwxrwx 1 tuxedo psoft 13040 Jul 25 13:06 patchlev
-rwxrwxrwx 1 tuxedo psoft 19382 Jul 25 13:06 README.html
-rwxrwxrwx 1 tuxedo psoft 1360 Jul 19 09:44 README.txt
-rwxrwxrwx 1 tuxedo psoft 5410 Jul 25 13:06 releasenotes.txt
drwxrwxrwx 3 tuxedo psoft 4096 Nov 1 15:11 samples
drwxrwxrwx 4 tuxedo psoft 4096 Nov 1 15:11 udataobj
-rwxrwxrwx 1 tuxedo psoft 24728 Jul 19 09:44 uninstall
[tuxedo@HRIS-DEV RP097]$ pwd
/tmp/RP097
[tuxedo@HRIS-DEV RP097]$ ./install
-bash: ./install: /bin/ksh: bad interpreter: No such file or directory
[tuxedo@HRIS-DEV RP097]$
why "./install" is not working ??
what env. to be need ?
I try to download RP102 and apply, but showing same error.
somebody please help me.
regards,
Panumas N.

resolved
try to " . ./install"

ORA-02050 transaction string rolled back, some remote DBs may be in-doubt

Hi...guys...How ru all...
I got follwoing error...and I searched in google but there is not clear information..plz help me ...
Error Message: ORA-02050 transaction string rolled back, some remote DBs may be in-doubt
Error Cause:
Network or remote failure during a two-phase commit.
Action:
Notify operations; remote databases will automatically re-sync when the failure is repaired.
SQL>SELECT local_tran_id, global_tran_id, state, mixed, host, commit#
FROM dba_2pc_pending
LOCAL_TRAN_ID GLOBAL_TRAN_ID STATE MIX HOST COMMIT#
5.44.98254 JICRACDB.e1ab4089.5.44.98254 collecti no JICN\ROOM9 1132915640
ng 7-ITC
SQL> SELECT local_tran_id, in_out, database, dbuser_owner, interface
2 FROM dba_2pc_neighbors
3 /
LOCAL_TRAN_ID IN_OUT DATABASE DBUSER_OWNER INT
5.44.98254 in JIC N
5.44.98254 out RC_DBLINK JIC N
SQL> ;
1 select state, tran_comment, advice from dba_2pc_pending
2* where local_tran_id ='5.44.98254'
SQL> /
STATE TRAN_COMMENT ADVICE
collecting
so how can I delete distributed transaction..plz provide me any Metalink Docids.

See if following MOS note helps.
Manually Resolving In-Doubt Transactions: Different Scenarios (Doc ID 126069.1)

ORA-25402: transaction must roll back

I found this problem.ORA-25402: transaction must roll back
Please introduce , how resolve problem?
what view ? I'll able check for this problem.

If you had a network problem it is unlikely that the client would still be connected and able to issue a rollback. I have seen this message but I cannot remember what the situation is when it occurs. What Oracle wants is for the client to issue an explicit rollback statement.
There is a bug that produces this error unfortunately the OP did not include their Oracle version. The bug could be in all versions from 8 - 9.2.0.3 but is only confirmed to be in 9.2.0.3 where after Transaction Failover a commit or rollback incorrectly produces this error. According to the note a Select should produce this error. This would need to be a RAC system that uses transaction failover for this to apply: Note:2652886.8 Also TAF problem: Note:2652845.8
But it seems to me you can get this error on a distributed transaction. Oracle wants the client to issue an explicit rollback so that all parties to the distributed transaction rollback. If the application terminates due to the error then RECO will rollback the transaction. If the application issues the rollback it can then continue with additional (or retry) distributed queries.
HTH -- Mark D Powell --

Rolling patch 1 slows down the response time?

          Does anybody know why intalling rolling patch 1 with wls 6.0sp2 causes the slow
          down of the server response time?


          Yes, but i'm not sure about the differences between RP1 and RP2. Which are the
          main bugs that RP2 fixes and RP1 doesn't??
          "Eric Gross" <[email protected]> wrote:
          >Have you considered trying RP2?
          >
          >Eric
          >
          >"Diego G.Areizaga" <[email protected]> wrote in message
          >news:3c611600$[email protected]..
          >>
          >> Does anybody know why intalling rolling patch 1 with wls 6.0sp2 causes
          >the
          >slow
          >> down of the server response time?
          >
          >

BEA JRockit 5.0 JDK Rolling Patch 1 Release Installed on Client or Server?

Hi,
the BEA JRockit 5.0 JDK Rolling Patch 1 Release is installed on the server
side, i.e. unzip and use it to run the target application that need to
inspect. Or install on client side, i.e. use this runtime to run the memory
leak applet.
best regards,
Leo

Preferably both, but it is needed on the server.

Vip Failover and rolling patch

Hi,
For the purpose of implementing security features in the 2 Node RAC DB EE=10.2.0.5 [ID 1340831.1], I want to apply patch for bug:12880299 which is rolling available.
My question is: If I do all this procedure on node 1 (creating wallets,self-signed certificates,stop/start instances on the node), the node 2 DB should continue to accept incoming connection requests right?
In another way, I have tested FAILOVER tests while crashing node 1, and VIP was failed over to node 2, but I have no idea how vip will behave if DB,LISTENER,CRS,etc are literally stopped on node 1, will it still automatically move to Node 2?
Also, prior installation of PSE 12880299 before implementing COST in this verison of DB? Is this necessary whatever it is?
Thank you for your useful inputs.
Regards

With Oracle 10g you do connection time failover with setting in clients tnsnames.ora file all nodes addresses: Check following link:
http://docs.oracle.com/cd/B19306_01/network.102/b14213/tnsnames.htm#i477297
If your clients tnsnames.ora file is ok, Then client tries to connect addresses one by one. And this way it does not matter even if some server of the cluster is down. But of course when you shutdown one database instance it's connections will be dropped. Althought you can have SELECT clause failovers with Transparent Application Failover (TAF).
So you can run rolling update without shutting down whole RAC database as long as your clients tnsnames.ora is configured correctly. But those dropped connections need to be handled in application level.

Rolling Patch on 11gR2 nodes

Environment:
Operating System Red Hat Enterprise Linux Server release 5.7 (Tikanga) 2.6.18 274.7.1.el5 (64-bit)
RDBMS: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
It is a 3 Node RAC.
I would like to have the step in brief and in detail to perform the PSU 7 on ROLLING UPGRADE method over 3 Node RAC.
Please also point me to any link or details.
Thanks Sivaprasad.S

IMP NOTE:
TIME TAKEN FOR EACH NODE 1hr 30 mins
STEP 01 : CREATE PSU DIRECTORY -- ON ALL NODES
$cd $ORACLE_HOME
$mkdir ps
STEP 02: DOWNLOAD THE UPLOAD THE LATEST OPATCH TO THE SERVER -- ON ALL NODES
copy <NAME>.zip file to all the servers into psu folder which are part of the cluster
STEP 03: DOWNLOAD AND UPLOAD THE GI AND DB PATCH TO THE SERVER -- ON ALL NODES
copy <NAME>.zip file to all the servers into psu folder which are part of the cluster
STEP 04: STOP THE AGENT -- ON FIRST NODE1
$. oraenv
ORACLE_SID = [agent] ?agent
$emctl stop agent
STEP 05: SHUTDOWN THE INSTANCE -- ON FIRST NODE1
$. oraenv
ORACLE_SID = [orcl1] ?orcl1
$srvctl stop instance -i orcl1 -d orcl -o immediate
STEP 06: STOP CRS -- ON FIRST NODE1
#cd $CRS_HOME/bin
#./crsctl stop crs
STEP 07: APPLY PATCH FOR GRID (GI) -- ON FIRST NODE1
As root user on NODE1 execute:
<GRID_HOME>/OPatch/opatch auto <GRID_HOME>/psu -och <GRID_HOME> -ocmrf <GRID_HOME>/OPatch/ocm/bin/ocm.rsp
STEP 08: APPLY PATCH FOR INSTANCE (DBI)
As oracle user :
.$ORACLE_HOME/OPatch/opatch apply -local
$./$ORACLE_HOME/OPatch/opatch apply -local
STEP 06: START CRS
$cd $CRS_HOME/bin
$sudo ./crsctl start crs
STEP 07: VERIFICATION
Verify that an $ORACLE_HOME/psu/*********/catbundle_PSU_<database SID>_ROLLBACK.sql file exists for each database associated with this ORACLE_HOME.
Repeat the STEP04,STEP05,STEP07,STEP8 on NODE2 and NODE3 one after the another
LAST BUT NOT LEAST:
RUN CATBUNDLE.sql -- Only in with last instance

Scripting cluster failover for patching (2008 server not R2)

We have a number of Windows 2008 (not R2) servers running sql. We currectly patch using a third party tool (Shavlik) and would like to automate the process. eg. failover, patch, failback, check status. I started looking at Powershell
but it appears the cluster modules are for 2008R2 and not plain 2008. Anyone have a solution? Thanks.

As noted above, your best option is to upgrade to the latest OS - lots of good reasons to do that anyway. Otherwise, with 2008 you will need to script things with the cluster.exe and wmi commands executed via winrm (if you want to perform them remotely).
You would most likely put as much time, effort, and money into creating something that works in 2008 as it would take to upgrade to the latest Windows Server 2012 R2. And then, by having 2012 R2 in place it prepares you for v.Next which will enable a
rolling upgrade capability within a cluster.
. : | : . : | : . tim

ORA-600 during Apply of patch 3.1.2.00.02

I receice during installation of ApEx patch 3.1.2.00.02 following errors in the apxpatch.log
ERROR at line 1:
ORA-00600: internal error code, arguments: [kokegPinLob1], [], [], [], [], [],
ORA-06512: at line 548
ERROR at line 1:
ORA-00600: internal error code, arguments: [kokegPinLob1], [], [], [], [], [],
ORA-06512: at line 438
I can reproduce the issue with a 11.1.0.6 or 10.2.0.4 database, but not with a 10.1.0.5 database.
First I was thinking taht this issue realted to
BUG: 6922966 SELECT QUERY WITH TABLE CONTAIN CLOB COLUMN ORA-600 [KOKEGPINLOB1]
but applying one off patch for this bug on Linux x86 using a 10.2.0.4 database not solving the issue.
Any ideas?
Other people who see this error?
it seems that ApEx working fine after patch installation and the errors can be ignored, but I cannot be sure about it.

These errors are definetly caused by the 2 scripts mentioned above (and bellow):
1. patch/patches/3.1.2/patch_6988690.sql
2. patch/patches/3.1.2/patch_7298321.sql
Also I was able to reproduce the issue internally.
These errors are encountered when there is at least one additional language loaded beside English.
These 2 patch scripts are updating the wwv_flow_page_plugs with an UPDATE statement similar with the following one:
update wwv_flow_page_plugs
set plug_source = s
where flow_id between 4400 and 4409 ...
In this case 4400 is the flow_id for the Application Migration Project. For a default installation this ID is the only within the interval [4400,4409]
If you load an additional language (like French) then an additional flow_id is created for that language (like 4402).
The above UPDATE statement works successfully when there is only 1 row to be updated but fails if it finds 2 rows.
This seems to be related with the size of the "s" variable that is being constructed in these 2 scripts.
I have filled Bug 7451277 for this issue. This is currently being screened.
Regards,
Bogdan

Ora 10.2.0.4 Patch ZIP Password!

I have just downloaded patch 8 (10204_Patch8_MSWIN-x86-64.zip) from the SAP website (https://websmp203.sap-ag.de/swcenter-3pmain) but it asks for a password to unzip! Ditto for patch 11 (10204_Patch11_MSWIN-x86-64.zip )
Is it supposed to do that? How can I get the password?
I checked the forums but no one seems to have encountered this problem! (+or am I typing the wrong keywords! +)

Surprisingly, the zip file allows me view access to the files inside the archive!
I circumvented my problem by copy-pasting the files from the archive without extracting them! Weird!
I have completed the patching successfully.

ORA-15137: cluster in rolling patch

Similar Messages

Maybe you are looking for