ORA-16009: invalid redo transport destination;
Dear friends.
I am trying to set up phycial standby in Oracle 11g on linux in vmware.
Everything seems to fine but The configuration is not taking effect.
An error cropping repeatedly
ORA-16009
I am putting the errors and some of the contents.
Standby System
archive log list
Database log mode Archive Mode
Automatic archival Enabled
Archive destination /disk1/oradata/arch
Oldest online log sequence 2
Next log sequence to archive 3
Current log sequence 3
Production System
atabase log mode Archive Mode
Automatic archival Enabled
Archive destination /disk1/oradata/arch
Oldest online log sequence 8
Next log sequence to archive 9
Current log sequence 9
on Client Errors:
ORA-16009: invalid redo transport destination
PING[ARC0]: Heartbeat failed to connect to standby 'to_orcl1'. Error is 16009.
Fri May 04 22:45:54 2012
Errors in file /disk1/oradata/oracldir/diag/rdbms/orcl3/orcl3/trace/orcl3_arc0_10286.trc:
ORA-16009: invalid redo transport destination
PING[ARC0]: Heartbeat failed to connect to standby 'to_orcl1'. Error is 16009.
Fri May 04 22:47:45 2012
Errors in file /disk1/oradata/oracldir/diag/rdbms/orcl3/orcl3/trace/orcl3_arc0_10286.trc:
ORA-16009: invalid redo transport destination
PING[ARC0]: Heartbeat failed to connect to standby 'to_orcl1'. Error is 16009.
Fri May 04 22:49:48 2012
Errors in file /disk1/oradata/oracldir/diag/rdbms/orcl3/orcl3/trace/orcl3_arc0_10286.trc:
ORA-16009: invalid redo transport destination
PING[ARC0]: Heartbeat failed to connect to standby 'to_orcl1'. Error is 16009.
Fri May 04 22:51:40 2012
Errors in file /disk1/oradata/oracldir/diag/rdbms/orcl3/orcl3/trace/orcl3_arc0_10286.trc:
ORA-16009: invalid redo transport destination
PING[ARC0]: Heartbeat failed to connect to standby 'to_orcl1'. Error is 16009.
On Production System Errors:
ORA-16009: invalid redo transport destination
Fri May 04 22:47:37 2012
Error 1034 received logging on to the standby
Fri May 04 22:47:48 2012
RFS[43]: Assigned to RFS process 17922
RFS[43]: Database mount ID mismatch [0x2a846b0e:0x2a856e71] (713321230:713387633)
RFS[43]: Client instance is standby database instead of primary
RFS[43]: Not using real application clusters
Errors in file /disk1/oradata/oracldir/diag/rdbms/orcl3/orcl3/trace/orcl3_rfs_17922.trc:
ORA-16009: invalid redo transport destination
Fri May 04 22:49:17 2012
Destination LOG_ARCHIVE_DEST_2 is UNSYNCHRONIZED
Thread 1 advanced to log sequence 14 (LGWR switch)
Current log# 2 seq# 14 mem# 0: /disk1/oradata/oracldir/redolog2.log
Fri May 04 22:49:18 2012
Archived Log entry 17 added for thread 1 sequence 13 ID 0x2a7a0eb4 dest 1:
Fri May 04 22:49:50 2012
RFS[44]: Assigned to RFS process 17999
RFS[44]: Database mount ID mismatch [0x2a846b0e:0x2a856e71] (713321230:713387633)
RFS[44]: Client instance is standby database instead of primary
RFS[44]: Not using real application clusters
Errors in file /disk1/oradata/oracldir/diag/rdbms/orcl3/orcl3/trace/orcl3_rfs_17999.trc:
ORA-16009: invalid redo transport destination
Fri May 04 22:51:42 2012
RFS[45]: Assigned to RFS process 18057
RFS[45]: Database mount ID mismatch [0x2a846b0e:0x2a856e71] (713321230:713387633)
RFS[45]: Client instance is standby database instead of primary
RFS[45]: Not using real application clusters
Errors in file /disk1/oradata/oracldir/diag/rdbms/orcl3/orcl3/trace/orcl3_rfs_18057.trc:
ORA-16009: invalid redo transport destination
Fri May 04 22:52:00 2012
Error 1034 received logging on to the standby
Fri May 04 22:52:32 2012
Error 1034 received logging on to the standby
Errors in file /disk1/oradata/oracldir/diag/rdbms/orcl3/orcl3/trace/orcl3_arc2_17414.trc:
ORA-01034: ORACLE not available
FAL[server, ARC2]: FAL archive failed, see trace file.
Errors in file /disk1/oradata/oracldir/diag/rdbms/orcl3/orcl3/trace/orcl3_arc2_17414.trc:
ORA-16055: FAL request rejected
ARCH: FAL archive failed. Archiver continuing
ORACLE Instance orcl3 - Archival Error. Archiver continuing.
Fri May 04 22:53:42 2012
RFS[46]: Assigned to RFS process 18115
RFS[46]: Database mount ID mismatch [0x2a846b0e:0x2a856e71] (713321230:713387633)
RFS[46]: Client instance is standby database instead of primary
RFS[46]: Not using real application clusters
Errors in file /disk1/oradata/oracldir/diag/rdbms/orcl3/orcl3/trace/orcl3_rfs_18115.trc:
ORA-16009: invalid redo transport destination
OK;
I see several issues. Will post results back here in a Moment.
Primary
Missing several parameters :
FAL_SERVER
DB_UNIQUE_NAME
LOG_ARCHIVE_DEST_STATE_1 ( should be ENABLE )
LOG_ARCHIVE_DEST_STATE_2 ( should be ENABLE )
Incorrect settings
log_archive_dest_1
log_archive_dest_2
YOURS
log_archive_dest_1="location=/disk1/oradata/arch"
EXAMPLE FROM MINE
log_archive_dest_1='LOCATION=USE_DB_RECOVERY_FILE_DEST VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=PRIMARY'
YOURS
log_archive_dest_2="Service=to_orcl1 lgwr sync affirm reopen=3"
EXAMPLE FROM MINE
log_archive_dest_2='SERVICE=STANDBY LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=STANDBY'
Standby
Missing several parameters :
LOG_ARCHIVE_DEST_STATE_1 ( should be ENABLE )
LOG_ARCHIVE_DEST_STATE_2 ( should be DEFER )
FAL_SERVER
DB_UNIQUE_NAME
Incorrect settings
log_archive_dest_1
log_archive_dest_2
(similar to primary issues)
Summary
OK, this is way off. I don't in any way want to be unprofessional or rude but I'm not sure how to help without wasting you time or mine. So I'm going to take a few educated guesses and hope I'm helping you.
First I have a short note on how to do this here :
http://www.visi.com/~mseberg/data_guard_on_oracle_11_step_by_step.html
Second, you really need to understand the Oracle parameters needed by Data Guard so I would ask you read :
Data Guard Concepts and Administration 11g Release 2 (11.2) E10700-02
The section in chapter 3 "Set Primary Database Initialization Parameters"
Third, you say vmware. By that do you mean two separate vmware servers? A Primary and a Standby of something else?
More details here might help. Vmware is fine, but if I'm setting this up I want two Servers, one for the Primary and one for the Standby database.
Will still post the details of Standby INIt ASAP
Best Regards
mseberg
Edited by: mseberg on May 4, 2012 12:48 PM
Edited by: mseberg on May 4, 2012 1:43 PM
Similar Messages
-
Hi DBAs,
I saw the error ORA-16009 in alert log file. The database version is 10.2.0.3 configured with Physical standby on AIX 6.1 . The error is coming in alert log for a long time , I beleive after a swithover to Standby and switch back to Primary.
But I see the log from Primary to Standby are being applied and MRP is working fine on Standby Site.
I am posting the error message from alert log and trace file.
-------- Message in alert.log --------------
--Connected User is Valid
RFS[61129]: Assigned to RFS process 1511478
RFS[61129]: Database mount ID mismatch [0x8afdb574:0x8afd830b]
RFS[61129]: Client instance is standby database instead of primary
RFS[61129]: Not using real application clusters
Fri May 8 22:32:57 2009
Errors in file /oracle/admin/DBSID/udump/DBSID_rfs_1511478.trc:
ORA-16009: remote archive log destination must be a STANDBY database/oracle/admin/DBSID/bdump
HOST [DBSID]-> May 8 22:33:52 hostname daemon:err|error ltid[933986]: Remote scan failed on host HOST, drive IBMULTRIUM-TD25, Host is not the scan host for this shared drive (304)
----------------- Trace File with complete detail of the Error -----------------------------------
/oracle/admin/DBSID/udump/DBSID_rfs_1511478.trc
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning and Data Mining options
ORACLE_HOME = /oracle/product/10.2.0/db_1
System name: AIX
Node name: hostname
Release: 3
Version: 5
Machine: XXXXXXX
Instance name: DBSID
Redo thread mounted by this instance: 1
Oracle process number: 19
Unix process pid: 1491066, image: oracleDBSID@hostname*** SERVICE NAME:(DBSID.DOMAIN.COM) 2009-05-08 22:31:57.314
*** SESSION ID:(1094.21412) 2009-05-08 22:31:57.314
Detected dead process 1491030; subsuming V$MANAGED_STANDBY slot
*** 2009-05-08 22:31:57.318 61287 kcrr.c
RFS[61128]: Database mount ID mismatch [0x8afdb574:0x8afd830b]
*** 2009-05-08 22:31:57.318 61287 kcrr.c
RFS[61128]: Client instance is standby database instead of primary
*** 2009-05-08 22:31:57.318 61287 kcrr.c
RFS[61128]: Not using real application clusters
ORA-16009: remote archive log destination must be a STANDBY database
Please advise and suggest,
Thanks
-Samar-I have the follow setting for log_archive_dest_2 on Primary and standby which seems to be OK but above mention note which is for Oracle 9i server suggesting to disable the remote archiving on the standby database. Also I am using ASYNC option for log transport.
At Primary:
SQL> show parameter log_archive_dest_2
NAME TYPE VALUE
log_archive_dest_2 string SERVICE=STDBY LGWR ASYNC REOPEN=60 DB_UNIQUE_NAME=STDBY
At standby:
SQL> show parameter log_archive_dest_2
NAME TYPE VALUE
log_archive_dest_2 string SERVICE=PRI LGWR ASYNC REOPEN=60 DB_UNIQUE_NAME=PRI
Thanks
-Samar- -
Error: ORA-16778: redo transport error for one or more databases
Hi all
I have 2 database servers"Primary database and physical standby" in test environment( before going to Production)
Before Dataguard broker configuration , DG setup was running fine , redo was being applied and archived on phy standby.
but while enabling configuration i got "Warning: ORA-16607: one or more databases have failed" listener.ora & tnsnames.ora are updated with global_name_DGMGRL
Please help me how can i resolve this issue .Thanks in advance.
[oracle@PRIM ~]$ dgmgrl
DGMGRL for Linux: Version 10.2.0.1.0 - Production
Copyright (c) 2000, 2005, Oracle. All rights reserved.
Welcome to DGMGRL, type "help" for information.
DGMGRL> connect sys
Password:
Connected.
DGMGRL> show configuration
Configuration
Name: test
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
prim - Primary database
stan - Physical standby database
Current status for "test":
Warning: ORA-16607: one or more databases have failed
DGMGRL> show database
show database
^
Syntax error before or at "end-of-line"
DGMGRL> remove configuration
Warning: ORA-16620: one or more databases could not be contacted for a delete operation
Removed configuration
DGMGRL> exit
[oracle@PRIM ~]$ connect sys/sys@prim as sysdba
bash: connect: command not found
[oracle@PRIM ~]$ lsnrctl stop
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:52:30
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
The command completed successfully
[oracle@PRIM ~]$ lsnrctl start
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:52:48
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 08-OCT-2006 19:52:48
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PRIM_DGMGRLL" has 1 instance(s).
Instance "PRIM", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
[oracle@PRIM ~]$ lsnrctl stop
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:54:46
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
The command completed successfully
[oracle@PRIM ~]$ lsnrctl start
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:54:59
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
[oracle@PRIM ~]$ dgmgrl
DGMGRL for Linux: Version 10.2.0.1.0 - Production
Copyright (c) 2000, 2005, Oracle. All rights reserved.
Welcome to DGMGRL, type "help" for information.
DGMGRL> connect /
Connected.
DGMGRL> create configuration test as
primary database is PRIM
connect identifier is PRIM
;Configuration "test" created with primary database "prim"
DGMGRL> add database STAN as
connect identifier is STAN
maintained as physical;Database "stan" added
DGMGRL> show configuration
Configuration
Name: test
Enabled: NO
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
prim - Primary database
stan - Physical standby database
Current status for "test":
DISABLED
DGMGRL> enable configuration
Enabled.
DGMGRL> show configuration
Configuration
Name: test
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
prim - Primary database
stan - Physical standby database
Current status for "test":
Warning: ORA-16607: one or more databases have failed
DGMGRL> show database verbose prim
Database
Name: prim
Role: PRIMARY
Enabled: YES
Intended State: ONLINE
Instance(s):
PRIM
Properties:
InitialConnectIdentifier = 'prim'
LogXptMode = 'ASYNC'
Dependency = ''
DelayMins = '0'
Binding = 'OPTIONAL'
MaxFailure = '0'
MaxConnections = '1'
ReopenSecs = '300'
NetTimeout = '180'
LogShipping = 'ON'
PreferredApplyInstance = ''
ApplyInstanceTimeout = '0'
ApplyParallel = 'AUTO'
StandbyFileManagement = 'AUTO'
ArchiveLagTarget = '0'
LogArchiveMaxProcesses = '30'
LogArchiveMinSucceedDest = '1'
DbFileNameConvert = '/u01/app/oracle/oradata/STAN, /u01/app/oracle/oradata/PRIM'
LogFileNameConvert = '/u01/app/oracle/oradata/STAN, /u01/app/oracle/oradata/PRIM'
FastStartFailoverTarget = ''
StatusReport = '(monitor)'
InconsistentProperties = '(monitor)'
InconsistentLogXptProps = '(monitor)'
SendQEntries = '(monitor)'
LogXptStatus = '(monitor)'
RecvQEntries = '(monitor)'
HostName = 'PRIM'
SidName = 'PRIM'
LocalListenerAddress = '(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521))'
StandbyArchiveLocation = '/u01/app/oracle/flash_recovery_area/PRIM/archivelog/'
AlternateLocation = ''
LogArchiveTrace = '0'
LogArchiveFormat = '%t_%s_%r.arc'
LatestLog = '(monitor)'
TopWaitEvents = '(monitor)'
Current status for "prim":
Error: ORA-16778: redo transport error for one or more databases
DGMGRL> show database verbose stan
Database
Name: stan
Role: PHYSICAL STANDBY
Enabled: YES
Intended State: ONLINE
Instance(s):
STAN
Properties:
InitialConnectIdentifier = 'stan'
LogXptMode = 'ASYNC'
Dependency = ''
DelayMins = '0'
Binding = 'OPTIONAL'
MaxFailure = '0'
MaxConnections = '1'
ReopenSecs = '300'
NetTimeout = '180'
LogShipping = 'ON'
PreferredApplyInstance = ''
ApplyInstanceTimeout = '0'
ApplyParallel = 'AUTO'
StandbyFileManagement = 'AUTO'
ArchiveLagTarget = '0'
LogArchiveMaxProcesses = '30'
LogArchiveMinSucceedDest = '1'
DbFileNameConvert = '/u01/app/oracle/oradata/PRIM, /u01/app/oracle/oradata/STAN'
LogFileNameConvert = '/u01/app/oracle/oradata/PRIM, /u01/app/oracle/oradata/STAN'
FastStartFailoverTarget = ''
StatusReport = '(monitor)'
InconsistentProperties = '(monitor)'
InconsistentLogXptProps = '(monitor)'
SendQEntries = '(monitor)'
LogXptStatus = '(monitor)'
RecvQEntries = '(monitor)'
HostName = 'STAND'
SidName = 'STAN'
LocalListenerAddress = '(ADDRESS=(PROTOCOL=tcp)(HOST=STAND)(PORT=1521))'
StandbyArchiveLocation = '/u01/app/oracle/flash_recovery_area/STAN/archivelog/'
AlternateLocation = ''
LogArchiveTrace = '0'
LogArchiveFormat = '%t_%s_%r.arc'
LatestLog = '(monitor)'
TopWaitEvents = '(monitor)'
Current status for "stan":
Error: ORA-12545: Connect failed because target host or object does not exist
DGMGRL>This:
Current status for "stan":
Error: ORA-12545: Connect failed because target host or object does not exist
says that your network setup is not correct. You need to resolve that first.
As for Broker setup steps how about the doc or our Data Guard 11g Handbook?
It's 3 DGMGRL commands so I am not sure what 'steps' you need?
Larry -
Hello everyone :
I can't switchover to primary. following is error and information.
RHEL 6.3 x86-64
Oracle database 11.2.0.3.0 Enterprise edition
Primary database = orclprmy
Standby database = orclstby1
##### /etc/hosts on orclstby1
[root@orclstby1 admin]# cat /etc/hosts
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
192.168.50.211 ttprmy
192.168.50.212 orclstby1
### DG broker error
DGMGRL for Linux: Version 11.2.0.3.0 - 64bit Production
Copyright (c) 2000, 2009, Oracle. All rights reserved.
Welcome to DGMGRL, type "help" for information.
Connected.
DGMGRL> show configuration;
Configuration - TTDGConfig1
Protection Mode: MaxPerformance
Databases:
orclstby1 - Primary database
Error: ORA-16778: redo transport error for one or more databases
orclprmy - Physical standby database
Fast-Start Failover: DISABLED
Configuration Status:
ERROR
DGMGRL>
########### listener.ora on orclstby1
[root@orclstby1 admin]# cat listener.ora
# listener.ora Network Configuration File: /u2/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = orclstby1)(PORT = 1521))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME=orcl)
(SID_NAME = orclstby1)
(ORACLE_HOME = /u2/oracle/product/11.2.0/dbhome_1)
(SID_DESC =
(GLOBAL_DBNAME=orclstby1)
(SID_NAME = orclstby1)
(ORACLE_HOME = /u2/oracle/product/11.2.0/dbhome_1)
(SID_DESC =
(GLOBAL_DBNAME=orclstby1_DGMGRL)
(SID_NAME = orclstby1)
(ORACLE_HOME = /u2/oracle/product/11.2.0/dbhome_1)
ADR_BASE_LISTENER = /u2/oracle
############## tnsnames.ora on orclstby1
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.50.212)(PORT = 1521))
(CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = orcl))
orclprmy =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.50.211)(PORT = 1521))
(CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = orclprmy))
orclprmy_DGMGRL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.50.211)(PORT = 1521))
(CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = orclprmy_DGMGRL))
orclstby1 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.50.212)(PORT = 1521))
(CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = orclstby1))
orclstby1_DGMGRL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.50.212)(PORT = 1521))
(CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = orclstby1_DGMGRL))
##### alert log on orclstby1.
Fatal NI connect error 12504, connecting to:
(DESCRIPTION=(CONNECT_DATA=(SERVICE_NAME=)(CID=(PROGRAM=oracle)(HOST=orclstby1)(USER=oracle)))(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.50.211)(PORT=1521)))
VERSION INFORMATION:
TNS for Linux: Version 11.2.0.3.0 - Production
TCP/IP NT Protocol Adapter for Linux: Version 11.2.0.3.0 - Production
Time: 06-SEP-2013 13:19:55
Tracing not turned on.
Tns error struct:
ns main err code: 12564
TNS-12564: TNS:connection refused
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
There is problem in alert log.
In the /etc/hosts file. The standby server (orclstby1) ip is 192.168.50.212. but alert log is 192.168.50.211.
Is any idea?
Thanks for help.
消息编辑者为:user4914135#### on primary database
SQL> select dest_name,status,target,archiver,schedule, valid_type,valid_role,db_unique_name,error from v$archive_dest;
DEST_NAME STATUS TARGET ARCHIVER SCHEDULE VALID_TYPE VALID_ROLE DB_UNIQUE_NAME
ERROR
LOG_ARCHIVE_DEST_1 VALID LOCAL ARCH ACTIVE ALL_LOGFILES ALL_ROLES orclprmy
LOG_ARCHIVE_DEST_2 VALID REMOTE LGWR PENDING ALL_LOGFILES PRIMARY_ROLE orclstby1
LOG_ARCHIVE_DEST_3 INACTIVE LOCAL ARCH INACTIVE ALL_LOGFILES ALL_ROLES NONE
#### on standby database
SQL> select dest_name,status,target,archiver,schedule, valid_type,valid_role,db_unique_name,error from v$archive_dest;
DEST_NAME STATUS TARGET ARCHIVER SCHEDULE VALID_TYPE VALID_ROLE DB_UNIQUE_NAME
ERROR
LOG_ARCHIVE_DEST_1 VALID PRIMARY ARCH ACTIVE ALL_LOGFILES ALL_ROLES orclstby1
LOG_ARCHIVE_DEST_2 ERROR STANDBY LGWR PENDING ONLINE_LOGFILE PRIMARY_ROLE orclprmy
ORA-12504: TNS:listener was not given the SERVICE_NAME in
CONNECT_DATA
LOG_ARCHIVE_DEST_3 INACTIVE PRIMARY ARCH INACTIVE ALL_LOGFILES ALL_ROLES NONE
#### log_archive_dest on primary database
SQL> show parameter log_archive_dest
NAME TYPE VALUE
log_archive_dest string
log_archive_dest_1 string location=/u3/arch/orcl vali
d_for=(ALL_LOGFILES,ALL_ROLES)
db_unique_name=orclprmy
log_archive_dest_10 string
log_archive_dest_11 string
log_archive_dest_12 string
log_archive_dest_13 string
log_archive_dest_14 string
log_archive_dest_15 string
log_archive_dest_16 string
log_archive_dest_17 string
log_archive_dest_18 string
log_archive_dest_19 string
log_archive_dest_2 string service="orclstby1", LGWR ASYNC
NOAFFIRM delay=0 optional comp
ression=disable max_failure=0
max_connections=1 reopen=300 d
b_unique_name="orclstby1" net_ti
meout=30, valid_for=(all_logfi
les,primary_role)
log_archive_dest_20 string
log_archive_dest_21 string
log_archive_dest_22 string
#### log_archive_dest on standby database
SQL> show parameter log_archive_dest
NAME TYPE VALUE
log_archive_dest string
log_archive_dest_1 string location=/u3/arch/orclstby1 vali
d_for=(ALL_LOGFILES,ALL_ROLES)
db_unique_name=orclstby1
log_archive_dest_10 string
log_archive_dest_11 string
log_archive_dest_12 string
log_archive_dest_13 string
log_archive_dest_14 string
log_archive_dest_15 string
log_archive_dest_16 string
log_archive_dest_17 string
log_archive_dest_18 string
log_archive_dest_19 string
log_archive_dest_2 string service=orclprmy ASYNC valid_for
=(ONLINE_LOGFILE,PRIMARY_ROLE)
db_unique_name=orclprmy
log_archive_dest_20 string
log_archive_dest_21 string
log_archive_dest_22 string
log_archive_dest_23 string
log_archive_dest_24 string
log_archive_dest_25 string
#### spfile on standby database
</u2/oracle/product/11.2.0/dbhome_1/dbs> strings spfileorclstby1.ora
orcl.__db_cache_size=1040187392
orclstby1.__db_cache_size=1090519040
orcl.__java_pool_size=16777216
orclstby1.__java_pool_size=16777216
orcl.__large_pool_size=16777216
orclstby1.__large_pool_size=16777216
orcl.__oracle_base='/u2/oracle'#ORACLE_BASE set from environment
orclstby1.__oracle_base='/u2/oracle'#ORACLE_BASE set from environment
orcl.__pga_aggregate_target=536870912
orclstby1.__pga_aggregate_target=536870912
orcl.__sga_target=1610612736
orclstby1.__sga_target=161061273
orcl.__shared_io_pool_size=0
orclstby1.__shared_io_pool_size=0
orcl.__shared_pool_size=503316480
orclstby1.__shared_pool_size=469762048
orcl.__streams_pool_size=16777216
orclstby1.__streams_pool_size=0
*.archive_lag_target=0
*.audit_file_dest='/u2/oracle/admin/orclstby1/adump'
*.audit_trail='db'
*.compatible='11.2.0.0.0'
*.control_files='/u2/oracle/oradata/orclstby1/control01.ctl','/u2/oracle/fast_recovery_area/orclstby1/control02.ctl'
*.db_block_size=8192
*.db_domain=''
*.db_file_nam
e_convert='orcl','orclstby1'
*.db_name='orcl'
*.db_recovery_file_dest='/u2/oracle/fast_recovery_area'
*.db_recovery_file_dest_size=5218762752
*.db_unique_name='orclstby1'
*.deferred_segment_creation=FALSE
*.dg_broker_start=TRUE
*.diagnostic_dest='/u2/oracle'
*.fal_client='orclstby1'
*.fal_server='orclprmy'
*.log_archive_config='dg_config=(orclprmy,orclstby1)'
*.log_archive_dest_1='location=/u3/arch/orclstby1 valid_for=(ALL_LOGFILES,ALL_ROLES) db_unique_name=orclstby1'
*.log_archive_dest_2='ser
vice=orclprmy ASYNC valid_for=(ONLINE_LOGFILE,PRIMARY_ROLE) db_unique_name=orclprmy'
*.log_archive_dest_state_2='ENABLE'
orcl.log_archive_format='orcl_%t_%s_%r.arc'
*.log_archive_format='orclstby1_%t_%s_%r.arc'
orclstby1.log_archive_format='orclstby1_%t_%s_%r.arc'
*.log_archive_max_processes=4
*.log_archive_min_succeed_dest=1
orcl.log_archive_trace=0
orclstby1.log_archive_trace=0
*.log_file_name_convert='orcl','orclstby1'
*.open_cursors=300
*.pga_aggregate_target=536870912
*.processes=
1500
*.remote_login_passwordfile='EXCLUSIVE'
*.sessions=1655
*.sga_target=1610612736
*.standby_file_management='AUTO'
*.undo_tablespace='UNDOTBS1'
</u2/oracle/product/11.2.0/dbhome_1/dbs>
Thank you for your help. -
I am facing following errors , first error is on production database and second error is on physical standby database.
1. ORA-16778: redo transport error for one or more databases
2. ORA-01017: invalid username/password; logon denied
I study above messages but could not resolve. Now i shall be v v thankful if someone can help me in resolving errors, in simple step-by-step way.
Thank in advance1. ORA-16778: redo transport error for one or more databases
16778, 00000, "redo transport error for one or more databases"
// *Cause: The redo transport service was unable to send redo data to one
// or more standby databases.
// *Action: Check the Data Guard broker log and Oracle alert log for
// more details. Query the LogXptStatus property to see the
// errors.2. ORA-01017: invalid username/password; logon denied
Provide valid username/password
Post Operating System (OS) name & version for DB server system.
Post results of
SELECT * from v$version -
ERROR: ORA-01017: invalid username/password; logon denied
Hi all
I need your kind help.
I have installed Oracle Audit Vault Server Release 10.2.3.2 in Linux system and collection agent in Windows system. Adding and starting DBAUD collector went fine however adding REDO collector return back errors when executing avorcldb add_collector command as follow
[oracle@avsrv ~]$
[oracle@avsrv ~]$ avorcldb add_collector -srcname orcl -agentname avagent01 -colltype REDO -av Lugaopc:1521:orcl
collector REDO_Collector for source orcl already exists
initializing REDO Collector
ERROR: could not get AV source user connection using jdbc:oracle:oci:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=Lugaopc)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=orcl)))
ERROR: ORA-01017: invalid username/password; logon denied
[oracle@avsrv ~]$
Here is the contents of avorcldb.log file
09-09-13 16:58:44 [INFO ] Processing command add_collector
09-09-13 16:58:44 [INFO ] Processing arg -srcname = orcl
09-09-13 16:58:44 [INFO ] Processing arg -agentname = avagent01
09-09-13 16:58:44 [INFO ] Processing arg -colltype = REDO
09-09-13 16:58:44 [INFO ] Processing arg -av = Lugaopc:1521:orcl
09-09-13 16:58:44 [INFO ] Connect info : Lugaopc:1521:orcl
09-09-13 16:58:45 [INFO ] Got AV admin connection using jdbc:oracle:oci:@AVDB
09-09-13 16:58:45 [INFO ] Executing SQL as [ADM@AV] select s.host||':'||a1.num_value||':'||a2.char_value from avsys.av$attrvalue a1, avsys.av$attrvalue a2, avsys.av$source s, avsys.av$attrdef ad1, avsys.av$attrdef ad2 where source_name = :1 and a1.inst_id = s.source_id and a2.inst_id = s.source_id and a1.attr_id = ad1.attr_id and ad1.attr_name = 'PORT' and a2.attr_id = ad2.attr_id and ad2.attr_name = 'DB_SERVICE'
09-09-13 16:58:45 [INFO ] Using bind value orcl
09-09-13 16:58:45 [INFO ] Return value = Lugaopc:1521:orcl
09-09-13 16:58:45 [INFO ] Connect info : Lugaopc:1521:orcl
09-09-13 16:58:45 [INFO ] Executing SQL as [ADM@AV] select to_char(source_id) from avsys.av$source where source_name = :1
09-09-13 16:58:45 [INFO ] Using bind value orcl
09-09-13 16:58:45 [INFO ] Return value = 1
09-09-13 16:58:46 [INFO ] Got source user connection using jdbc:oracle:oci:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=Lugaopc)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=orcl)))
09-09-13 16:58:46 [INFO ] Executing SQL as [ADM@AV] select decode(c.status, 1, 'active', 0, 'dropped', null) from avsys.av$collector c, avsys.av$source s where source_name = :1 and collector_name = :2 and c.source_id = s.source_id
09-09-13 16:58:46 [INFO ] Using bind value orcl
09-09-13 16:58:46 [INFO ] Using bind value REDO_Collector
09-09-13 16:58:46 [INFO ] Return value = active
09-09-13 16:58:46 [MESG ] collector REDO_Collector for source orcl already exists
09-09-13 16:58:46 [INFO ] Executing SQL as [ADM@AV] select decode(c.status, 1, 'active', 0, 'dropped', null) from avsys.av$collector c, avsys.av$source s where source_name = :1 and collector_name = :2 and c.source_id = s.source_id
09-09-13 16:58:46 [INFO ] Using bind value orcl
09-09-13 16:58:46 [INFO ] Using bind value REDO_Collector
09-09-13 16:58:46 [INFO ] Return value = active
09-09-13 16:58:46 [MESG ] initializing REDO Collector
09-09-13 16:58:46 [INFO ] Executing SQL as [ADM@AV] select username from avsys.av$source where source_name = :1
09-09-13 16:58:46 [INFO ] Using bind value orcl
09-09-13 16:58:46 [INFO ] Return value = AVSRCUSR1
09-09-13 16:58:46 [INFO ] Executing SQL as [ADM@AV] {? = call avsys.dbms_audit_vault.reset_source_user(?)}
09-09-13 16:58:46 [INFO ] Adding mask for user password
09-09-13 16:58:46 [INFO ] Executing SQL as [USR@SRC] select table_name from user_tables where upper(table_name) = upper(:1)
09-09-13 16:58:46 [INFO ] Using bind value STREAMS_HEARTBEAT
09-09-13 16:58:46 [INFO ] Return value = STREAMS_HEARTBEAT
09-09-13 16:58:46 [INFO ] Executing SQL as [USR@SRC] drop table streams_heartbeat
09-09-13 16:58:46 [INFO ] Executing SQL as [USR@SRC] create table streams_heartbeat( src_dbname varchar2(4000), job_number number, heartbeat_time timestamp)
09-09-13 16:58:46 [INFO ] Executing SQL as [USR@SRC] declare dbs_name varchar2(4000); begin select global_name into dbs_name from global_name; insert into streams_heartbeat values (dbs_name, 0, SYSTIMESTAMP); end;
09-09-13 16:58:46 [INFO ] Executing SQL as [USR@SRC] create or replace procedure update_heartbeat IS begin update streams_heartbeat set heartbeat_time=(select systimestamp from dual); commit; end;
09-09-13 16:58:46 [INFO ] Executing SQL as [USR@SRC] select table_name from user_tables where upper(table_name) = upper(:1)
09-09-13 16:58:46 [INFO ] Using bind value CAPTURE_RULES
09-09-13 16:58:46 [INFO ] Return value = CAPTURE_RULES
09-09-13 16:58:46 [INFO ] Executing SQL as [USR@SRC] drop table capture_rules
09-09-13 16:58:46 [INFO ] Executing SQL as [USR@SRC] create table capture_rules( rule_name varchar2(50), rule_scope varchar2(6), rule_type varchar2(3), obj_name varchar2(100))
09-09-13 16:58:46 [INFO ] Executing SQL as [ADM@AV] select global_name from global_name
09-09-13 16:58:46 [INFO ] Return value = AVDB.AVSRV
09-09-13 16:58:46 [INFO ] Executing SQL as [USR@SRC] select db_link from user_db_links where db_link = :1
09-09-13 16:58:46 [INFO ] Using bind value AVDB.AVSRV
09-09-13 16:58:46 [INFO ] Return value = AVDB.AVSRV
09-09-13 16:58:46 [INFO ] Executing SQL as [USR@SRC] drop database link "AVDB.AVSRV"
09-09-13 16:58:46 [INFO ] Executing SQL as [USR@SRC] select version from v$instance
09-09-13 16:58:46 [INFO ] Return value = 11.2.0.1.0
09-09-13 16:58:46 [INFO ] Creating DB link using AVDB.AVSRV,AVSRCUSR1,{avsrcusr_pwd},Lugaopc,1521,orcl
09-09-13 16:58:46 [INFO ] Connecting as srcuser_ora01 to @(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=Lugaopc)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=orcl)))
09-09-13 16:58:46 [INFO ] Output from SQLPlus
09-09-13 16:58:46 [INFO ]
09-09-13 16:58:46 [INFO ] Package created.
09-09-13 16:58:46 [INFO ]
09-09-13 16:58:46 [INFO ] No errors.
09-09-13 16:58:47 [INFO ]
09-09-13 16:58:47 [INFO ] Package body created.
09-09-13 16:58:47 [INFO ]
09-09-13 16:58:47 [INFO ] No errors.
09-09-13 16:58:47 [INFO ]
09-09-13 16:58:47 [INFO ] Package created.
09-09-13 16:58:47 [INFO ]
09-09-13 16:58:47 [INFO ] No errors.
09-09-13 16:58:47 [INFO ]
09-09-13 16:58:47 [INFO ] Package body created.
09-09-13 16:58:47 [INFO ]
09-09-13 16:58:47 [INFO ] No errors.
09-09-13 16:58:47 [INFO ] Executing SQL as [USR@SRC] select distinct name from user_errors where name = :1
09-09-13 16:58:47 [INFO ] Using bind value DBMS_SRC_STREAMS_COLLECTOR
09-09-13 16:58:47 [INFO ] Return value = null
09-09-13 16:58:47 [ERROR] could not get AV source user connection using jdbc:oracle:oci:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=Lugaopc)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=orcl)))
09-09-13 16:58:47 [ERROR] ORA-01017: invalid username/password; logon denied
java.sql.SQLException: ORA-01017: invalid username/password; logon denied
at oracle.jdbc.driver.T2CConnection.checkError(T2CConnection.java:765)
at oracle.jdbc.driver.T2CConnection.logon(T2CConnection.java:414)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:546)
at oracle.jdbc.driver.T2CConnection.<init>(T2CConnection.java:162)
at oracle.jdbc.driver.T2CDriverExtension.getConnection(T2CDriverExtension.java:53)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:521)
at java.sql.DriverManager.getConnection(DriverManager.java:525)
at java.sql.DriverManager.getConnection(DriverManager.java:140)
at oracle.av.avca.jdbc.JdbcConnection.<init>(JdbcConnection.java:87)
at oracle.av.orcldb.DAO.initConnection(DAO.java:79)
at oracle.av.orcldb.DAO.<init>(DAO.java:64)
at oracle.av.orcldb.commands.AddCollector.setupCollector(AddCollector.java:746)
at oracle.av.orcldb.commands.AddCollector.execute(AddCollector.java:230)
at oracle.av.orcldb.Command.process(Command.java:89)
at oracle.av.orcldb.Main.process(Main.java:118)
at oracle.av.orcldb.Main.main(Main.java:132)
I have searched the forum to my level best without clear solution
Regards
SadockHi gurus
I don't believe if this is missing solution from oracle community. I have decided to installed the collction agent and source database in linux system, so now both auditt vault server and collction agent are running in Linux system (but separately)
I am wondering, avorcldb add_collector -srcname ORCL -agentname avagent01 -colltype DBAUD and avorcldb add_collector -srcname ORCL -agentname avagent01 -colltype OSAUD -orclhome /u01/app/oracle/product/11.2.0/dbhome_1 are working fine and I am able to start these collectors
The avorcldb verify -src Lugaosrv:1521:ORCL.LUGAOSRV -colltype ALL command also return good results
[oracle@avsrv ~]$ avorcldb verify -src Lugaosrv:1521:ORCL.LUGAOSRV -colltype ALL
Enter Source user name: srcuser_ora01
Enter Source password:
source ORCL.LUGAOSRV verified for OS File Audit Collector collector
source ORCL.LUGAOSRV verified for Aud$/FGA_LOG$ Audit Collector collector
source ORCL.LUGAOSRV verified for REDO Log Audit Collector collector
[oracle@avsrv ~]$
The problem still I am facing is when attempting to add REDO collector. In fact the collector is added successful and i can see it even on EM console.
[oracle@avsrv ~]$ avorcldb add_collector -srcname ORCL -agentname avagent01 -colltype REDO -av Lugaosrv:1521:ORCL.LUGAOSRV
source ORCL verified for REDO Log Audit Collector collector
Adding collector...
Collector added successfully.
remember the following information for use in avctl
Collector name (collname): REDO_Collector
initializing REDO Collector
ERROR: could not get AV source user connection using jdbc:oracle:oci:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=Lugaosrv)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=ORCL.LUGAOSRV)))
ERROR: ORA-01017: invalid username/password; logon denied
[oracle@avsrv ~]$
Any help will be appreciated
Sadock -
ORA-48108: invalid value given for the diagnostic_dest init.ora parameter
Hi All,
I am trying to start my oracle 11g database on windows 7 PC and i am getting below exception
SQL> startup mount
ORA-48108: invalid value given for the diagnostic_dest init.ora parameter
ORA-48140: the specified ADR Base directory does not exist [d:\oracle\app\product\11.2.0\dbhome_1\database\<oracle_base>]
ORA-48187: specified directory does not exist
OSD-00002: additional error information
O/S-Error: (OS 123) The filename, directory name, or volume label syntax is incorrect.
SQL>
Earlier it was working fine. For learning purpose, i have created spfile using pfile and after that i got this issue.
Please help.
Regards,
Sunilsunil907 wrote:
Hi,
I have provided diagnostic_dest folder location (physical path). Now i am getting some different kind of error on startup.
SQL> startup
ORACLE instance started.
Total System Global Area 1068937216 bytes
Fixed Size 2182592 bytes
Variable Size 616563264 bytes
Database Buffers 444596224 bytes
Redo Buffers 5595136 bytes
ORA-00205: error in identifying control file, check alert log for more info
Please help
What does your own research of 'ORA-00205' indicate?
the text of the error message is pretty self explanatory .. it couldn't find the control file.
The control files are specified by the "control_files" initialilzation paramter. When you get this error, the instance has started but was unable to mount the control file. since the init file (spfile) was processed and the instance started you can easily see what it thinks are the control files.
oracle:fubar$ sqlplus / as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Tue Jul 16 12:51:37 2013
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup
ORACLE instance started.
Total System Global Area 835104768 bytes
Fixed Size 2217952 bytes
Variable Size 490735648 bytes
Database Buffers 339738624 bytes
Redo Buffers 2412544 bytes
ORA-00205: error in identifying control file, check alert log for more info
SQL> show parameter control
NAME TYPE VALUE
control_file_record_keep_time integer 7
control_files string /u01/app/oracle/oradata/FUBAR/
controlfile/o1_mf_8ybx4t7w_.ct
x, /u01/app/oracle/flash_recov
ery_area/FUBAR/controlfile/o1_
mf_8ybx4tom_.ctl
control_management_pack_access string NONE
SQL>
So what did you do in fixing your original problem that caused your control_files parameter to go south? -
Oracle 10g EE Export Results in ORA-01001: invalid cursor Error
Hi,
I'm quite new to Oracle 10g and OCS10g. We have a crippled/corrupt SYSAUX tablespace (data file 3) which cannot be recovered using recover
command anymore. So metalink support instructed us to do a export of the metadata of the working tablespace which contains our system data (we are in configuration stage for OCS 10g 10.1.2) via transportable tablespaces so that I can just recreate the database in DBCA and import the metadata. So after I made a cold backup, set the "transportable" tablespaces to "READ ONLY" mode, I proceeded w/ the export command which resulted in an error, please see below:
$exp \'sys/********@ocs10gSID as sysdba\' parfile=transport.par
Connected to: Oracle Database 10g Enterprise Edition Release 10.1.0.4.2 -
Production
With the Partitioning, Real Application Clusters, OLAP and Data Mining options
Export done in US7ASCII character set and AL16UTF16 NCHAR character set
server uses AL32UTF8 character set (possible charset conversion)
Note: table data (rows) will not be exported
About to export transportable tablespace metadata...
EXP-00008: ORACLE error 1001 encountered
ORA-01001: invalid cursor
ORA-06512: at "SYS.DBMS_SYS_SQL", line 899
ORA-06512: at "SYS.DBMS_SQL", line 19
ORA-06512: at "SYS.DBMS_TTS", line 811
ORA-00376: file 3 cannot be read at this time
ORA-01110: data file 3: '/ocfs/oradata/OCS/datafile/o1_mf_sysaux_2mgzbr51_.dbf'
ORA-06512: at "SYS.DBMS_PLUGTS", line 1444
ORA-06512: at line 1
Anyone encountered this problem before? Any recommendations or tips to get this working?
I checked this url:"http://luhartma.blogspot.com/2006/05/how-to-check-if-tablespace-is.html"
And when I try to follow the instructions and check on of the tablespace I set to and verified to be in "READ ONLY" mode, I get the same error.
SQL> connect / as sysdba
Connected.
SQL> exec dbms_tts.TRANSPORT_SET_CHECK('PORTAL',TRUE)
BEGIN dbms_tts.TRANSPORT_SET_CHECK('PORTAL',TRUE); END;
ERROR at line 1:
ORA-01001: invalid cursor
ORA-06512: at "SYS.DBMS_SYS_SQL", line 899
ORA-06512: at "SYS.DBMS_SQL", line 19
ORA-06512: at "SYS.DBMS_TTS", line 811
ORA-00376: file 3 cannot be read at this time
ORA-01110: data file 3: '/ocfs/oradata/OCS/datafile/o1_mf_sysaux_2mgzbr51_.dbf'
ORA-06512: at "SYS.DBMS_TTS", line 840
ORA-06512: at line 1
Hope someone can help on this or at least provide a suggestion. Data file 3 above is the reason we are doing a transportable tablespace export & db recreation.
BTW what we have is:
OCS 10g 10.1.2 w/ Oracle RDBMS 10g Enterprise Edition 10.1.0.4.2
RHEL4 Update2
Thanks in advance.
Regards,
-KenthHi,
The status is "RECOVER" we have actually tried to recover but unfortunately the archive logs that were needed were on disks and were lost during one of the server hardware failures. Actually that is the reason why metalink support recommended this route for getting everything in order since we don't have any application data in SYSAUX yet.
Thanks. -
ORA-38101: Invalid column in the INSERT VALUES Clause: "acn"
Hi,
Oracle version :
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
Funny issue,
MERGE INTO tfc cb1
USING (SELECT 5351 fs,
1 cs
FROM DUAL) dual1
ON (cb1.fs = dual1.fs
AND cb1.asgn_cs = dual1.cs)
WHEN MATCHED
THEN
UPDATE
SET cb1.acn = '145' ,
cb1.cbs = (SELECT ta.as
FROM tac ta
WHERE ta.acn = '145'
AND ta.ent = 2),
cb1.bfs = 3 ,
cb1.efd = '28-OCT-09' ,
cb1.uui = 'A' ,
cb1.ut = sysdate
WHERE cb1.fs = 5351
AND cb1.asgn_cs = 1
WHEN NOT MATCHED
THEN
INSERT
(cb1.fund_cbs,
cb1.asgn_cs,
cb1.cbs,
cb1.fs,
cb1.bfs,
cb1.acn,
cb1.efd,
cb1.cre_usr_id,
cb1.uui
VALUES
(tfc.NEXTVAL,
dual1.cs,
(SELECT ta.as
FROM tac ta
WHERE ta.acn = '145'
AND ta.ent = 2),
dual1.fs,
3,
'145',
'28-OCT-09',
'A',
'A'
);When i try to run this , get
Error report:
SQL Error: ORA-38101: Invalid column in the INSERT VALUES Clause: "acn"
38101. 00000 - "Invalid column in the INSERT VALUES Clause: %s"
*Cause: INSERT VALUES clause refers to the destination table columns
*Action:
Now, when I try n remove the alias name from the insert clause, i.e.
MERGE INTO tfc cb1
USING (SELECT 5351 fs,
1 cs
FROM DUAL) dual1
ON (cb1.fs = dual1.fs
AND cb1.asgn_cs = dual1.cs)
WHEN MATCHED
THEN
UPDATE
SET cb1.acn = '145' ,
cb1.cbs = (SELECT ta.as
FROM tac ta
WHERE ta.acn = '145'
AND ta.ent = 2),
cb1.bfs = 3 ,
cb1.efd = '28-OCT-09' ,
cb1.uui = 'A' ,
cb1.ut = sysdate
WHERE cb1.fs = 5351
AND cb1.asgn_cs = 1
WHEN NOT MATCHED
THEN
INSERT
(cb1.fund_cbs,
cb1.asgn_cs,
cb1.cbs,
cb1.fs,
cb1.bfs,
cb1.acn,
cb1.efd,
cb1.cre_usr_id,
cb1.uui
VALUES
(tfc.NEXTVAL,
dual1.cs,
(SELECT as
FROM tac
WHERE acn = '145' -------- remove alias from here i.e. 'ta'
AND ent = 2),
dual1.fs,
3,
'145',
'28-OCT-09',
'A',
'A'
);The above statement fine.
Edited by: user8650395 on Mar 12, 2010 6:10 AM
Edited by: user8650395 on Mar 12, 2010 6:19 AMHi,
Nice formatting!
The first value in the INSERT clause looks suspicious:
MERGE INTO tfc cb1
INSERT
(cb1.fund_cbs,
cb1.asgn_cs,
cb1.cbs,
cb1.fs,
cb1.bfs,
cb1.acn,
cb1.efd,
cb1.cre_usr_id,
cb1.uui
VALUES
(tfc.NEXTVAL, ...If tfc is a table name, then it can't be a sequnece name.
Perhaps you meant something like
... VALUES
(tfc_id_seq.NEXTVAL, ...I hope that solves the problem.
If not, post a little sample data (CREATE TABLE and INSERT statements) for the tables as they exist before the MERGE.
Edited by: Frank Kulash on Mar 12, 2010 9:34 AM -
ORA-00354: corrupt redo log block header
Hi Guys,
Need your support to resolve one of the oracle issues,
Below are errors visible in alert.log in oracle,
ORA-16038: log 24 sequence# 660467 cannot be archived
ORA-00354: corrupt redo log block header
ORA-00312: online log 24 thread 1: '/oracle/PRD/origlogB/log_g24_m1.dbf'...
2010-10-03 07:26:12.835 20195 kcrr.c
ORA-16014: log 24 sequence# 660467 not archived, no available
destinations
Below is o/p of archive log list seems to be bit strange,
SQL> archive log list
Database log mode Archive Mode
Automatic archival Enabled
Archive destination /oracle/PRD/saparch/PRDarch
Oldest online log sequence 660467
Next log sequence to archive 660467
Current log sequence 660576
And some more info,
SQL> SELECT GROUP#, STATUS, MEMBER FROM V$LOGFILE;
GROUP# STATUS MEMBER
28 /oracle/PRD/origlogB/log_g28_m1.dbf
28 /oracle/PRD/mirrlogB/log_g28_m2.dbf
27 /oracle/PRD/origlogA/log_g27_m1.dbf
27 /oracle/PRD/mirrlogA/log_g27_m2.dbf
26 /oracle/PRD/origlogB/log_g26_m1.dbf
26 /oracle/PRD/mirrlogB/log_g26_m2.dbf
25 /oracle/PRD/origlogA/log_g25_m1.dbf
25 /oracle/PRD/mirrlogA/log_g25_m2.dbf
24 /oracle/PRD/origlogB/log_g24_m1.dbf
24 /oracle/PRD/mirrlogB/log_g24_m2.dbf
23 /oracle/PRD/origlogA/log_g23_m1.dbf
23 /oracle/PRD/mirrlogA/log_g23_m2.dbf
22 /oracle/PRD/origlogB/log_g22_m1.dbf
22 /oracle/PRD/mirrlogB/log_g22_m2.dbf
21 /oracle/PRD/origlogA/log_g21_m1.dbf
21 /oracle/PRD/mirrlogA/log_g21_m2.dbf
16 rows selected.
SQL> SELECT GROUP#, SEQUENCE#, MEMBERS, ARCHIVED, STATUS, FIRST_CHANGE# FROM V$LOG;
GROUP# SEQUENCE# MEMBERS ARC STATUS FIRST_CHANGE#
21 660571 2 NO INACTIVE 2.9116E+10
22 660572 2 NO INACTIVE 2.9116E+10
23 660570 2 NO INACTIVE 2.9116E+10
24 660467 2 NO INACTIVE 2.9114E+10
25 660573 2 NO ACTIVE 2.9116E+10
26 660574 2 NO CURRENT 2.9116E+10
27 660568 2 NO INACTIVE 2.9116E+10
28 660569 2 NO INACTIVE 2.9116E+10
8 rows selected.
All file exists but still facing issue, no backup is running
Regards,
YashHi,
Instead of the logfile name, try the command with the logfile integer as mentioned below.
alter database clear unarchived logfile group <integer>;
You can get the logfile integer using the view, v$log.
select GROUP#,MEMBERS,STATUS from v$log;
The value for the parameter GROUP# is the logfile integer.
Hope this helps.
Regards,
Varadharajan M -
ORA-01017: invalid username/password; how to find out orapwd files 's pwd
Hi, gurus,
I have this error after I copied primary db orapwd files over to standby instance and tried to log in sys as sysdba :
ORA-01017: invalid username/password; logon denied
Is this means the sys password I provided is not the one generated as per orapwd utility?
however I can log in to sys/password as sysdba if I set the oracle sid environemnt to that db.
Anybody help here?
Thanks.Hello;
In that case you would have to change the SYS password at the Primary ( so you know it ) and then do the copy and rename again.
Don't forget to stop apply on the standby and then shutdown and restart on the new password file. ( or you will have issues )
Proof :
Re: Transport service doesn't work with error ORA-16191
Best Regards
mseberg
Double check of my notes
ORA-01017
Change the sys password in the primary database using the alter system command, it updates the password file in the ORACLE_HOME of the primary database, it doesn't update password file in the standby database.
In Oracle 10 you can create a password file. In Oracle 11 you must move a new copy to the standby.
Edited by: mseberg on Jul 6, 2012 6:30 AM -
ORA-01017: invalid username/password; logon denied in Standby Server
Hello,
In Standby Server , when executing logs applying process it shows an error.
It happens suddenly
Now logs from PRD to standby is not applying.
Error log is as follows:
BR0002I BRARCHIVE 7.00 (42)
BR0006I Start of offline redo log processing: aehrjpck.svd 2012-01-17 08.38.34
BR0484I BRARCHIVE log file: /oracle/PRD/saparch/aehrjpck.svd
BR0280I BRARCHIVE time stamp: 2012-01-17 08.38.34
BR0301W SQL error -1017 at location BrDbConnect-2, SQL statement:
'CONNECT system/********@PRD.WORLD'
ORA-01017: invalid username/password; logon denied
BR0310W Connect to database instance PRD/PRIMARY failed.
BR0338E Applying offline redo log file /oracle/PRD/oraarch/standby/PRDarch1_24090_696018700.dbf failed
BR0338E Applying offline redo log file /oracle/PRD/oraarch/standby/PRDarch1_24091_696018700.dbf failed
BR0016I 0 offline redo log files processed, total size 0.000 MB
BR0280I BRARCHIVE time stamp: 2012-01-17 08.38.36
BR0301W SQL error -1017 at location BrDbConnect-2, SQL statement:
'CONNECT system/********@PRD.WORLD'
ORA-01017: invalid username/password; logon denied
BR0310W Connect to database instance PRD/PRIMARY failed
BR0007I End of offline redo log processing: aehrjpck.svd 2012-01-17 08.38.36
BR0280I BRARCHIVE time stamp: 2012-01-17 08.38.36
BR0005I BRARCHIVE terminated with errors
Standby DB is in mount state
I have checked from v$instance.
# select status from v$instance;
MOUNTED
Logs applying commadt is as follows;
# brarchive -u system/systempwd -c -f -d disk -m 30 -sd
How can i check whether , the status of SYSTEM user?
Since Standby is in mount state, im not allowed to query DBA_USERS
How can i check whether , SYSTEM user is locked or not.
Is it possible to change the password of SYSTEM , while DB is in mount state.
I have tried like this;
#sqlplus
/ as sysdba
<It logon as sys - success>
conn SYSTEM
Enter password: systempwd
ERROR:
ORA-01033: ORACLE Initialization or shutdown in progress
Warning: You are not longer connected to ORACLE
Im not able to connect as SYSTEM user.
What should be the solution for this;
regards,
ZerandibIs it possible to maintain different passwords for users in Standby and PrimaryFor SYSTEM user, you don't need to worry because when you change SYSTEM user password on primary, it will automatically be updated on the standby because password is saved in data dictionary and data dictionary change is also propagated at the standby standby site. More importantly, you will not be able to perform any data change on standby site in any case (password change of any user other than SYSDBA is a "data change" actually)
For SYS password, no you can't have a different password on primary and standby site(s)
Salman -
ORA-01727 during impdp transportable datafiles:numeric precision specifier
I started impdp the rman converted the datafiles into tartget and got error on one of the table:
ORA-01727: numeric precision specifier is out of range 1 to 38
I tried to fix it by create the table definition by change several columns number (126) to number (38), it worked, and then I tried to impdp again with tables=tablename
content=data_only, it give me error that the imp dump file is specific for transportable tablespace.
I dont know how to fix this issue. Can anybody help on this?
Thanks in advance.Here is the error after I created the table and then trying to import the data:
impdp system/password dumpfile=dp_tts.dmp table_exists_action=APPEND tables=asset.customer_ticket content=data_only;
Import: Release 11.2.0.3.0 - Production on Mon May 6 01:01:41 2013
Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, Automatic Storage Management, OLAP, Data Mining
and Real Application Testing options
ORA-39002: invalid operation
ORA-39061: import mode TABLE conflicts with export mode TRANSPORTABLE -
DBV-00201: Block, DBA 224, marked corrupt for invalid redo application
Hello Oracle gurus,
I ran a "dbv file=<datafile name>" against one of my datafiles that I suspected corruption in. it reported back with
DBV-00201: Block, DBA 224, marked corrupt for invalid redo application
DBV-00201: Block, DBA 243, marked corrupt for invalid redo application
DBV-00201: Block, DBA 244, marked corrupt for invalid redo application
DBV-00201: Block, DBA 245, marked corrupt for invalid redo application
DBV-00201: Block, DBA 246, marked corrupt for invalid redo application
Total Pages Marked Corrupt : 5
I then ran a "backup validate check logical database" in RMAN and it populated v$database_block_corruption with 2 rows, the same blocks as listed from the dbv output. I found the offending table, dropped it, and purged it from the recyclebin and ran another "backup validate check logical database". The v$database_block_corruption table returned no rows after this. However, when I run another "dbv file=<datafile name>", it is still reporting the same thing as before: DBV-00201: Block, DBA 224, marked corrupt for invalid redo application
Have I fixed the corruption problem? If yes, why is the dbv command still reporting corruption? If not, do I need to use dbms_repair?
Respectfully,
MimiDROP TABLE does not write on blocks/extents used by the dropped table (even with PURGE option). This explain why dropping the table does not remove the DBV error messages.
1* select tablespace_name, extent_management, allocation_type
from dba_tablespaces where tablespace_name='P1'
SQL> /
TABLESPACE_NAME EXTENT_MAN ALLOCATIO
P1 LOCAL SYSTEM
SQL> select * from v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
TNS for Linux: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
SQL> create table t(x int) tablespace p1;
Table created.
SQL> alter tablespace p1 read only;
Tablespace altered.
SQL> drop table t purge;
Table dropped.
SQL> select * from t;
select * from t
ERROR at line 1:
ORA-00942: table or view does not exist
SQL> alter tablespace p1 read write;
Tablespace altered.But note also:
$ oerr dbv 201
201, 1, "Block, DBA %d, marked corrupt for invalid redo application"
// *Cause: The block was marked corrupt by the Oracle database server
// for invalid redo application, ex: media recovery of a NOLOGGING
// object or direct loaded data.
// *Action: If the block is not currently allocated to a database object,
// then no action is required. If the block is allocated, then
// the object will need to be rebuilt, or data to be reloaded.If you are using NOLOGGING operations or direct loaded data and because you have dropped the related object,
you don't need to care about these errors.
Edited by: P. Forstmann on 20 juin 2010 20:17 -
Error During Installation: ORA-02180: invalid option for CREATE TABLESPACE
Hi all,
This is our enviroment,
Windows 2000 Service Pack 4
We are installing SAP R/3 Enterprise 4.7 Ext. 200 SR1
First we installed:
Oracle: 9.2
Patch: 9.2.0.7
SAP Central Instance
Now we are installing the DB Instance, but it gives this error:
INFO 2007-11-22 16:58:20
Working directory changed to C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\ORA\NUC\DB.
ERROR 2007-11-22 16:58:21
CJS-00084 SQL statement or script failed.DIAGNOSIS: Error message: ORA-02180: invalid option for CREATE TABLESPACE
We are in the step 19 of 34
Create Tablespaces
Please some tips.
Regards,
ErickHi! Thanks a lot for the reply.
This is our <b>ora_sql_results.log</b>
================================================================================
2007-11-23, 07:31:09 SAPINST ORACLE start logging for
connect / as sysdba ;
set newpage 0
set space 0
set pagesize 0
set linesize 32767
set markup HTML off
set heading off
set verify off
set feedback off
set trimspool on
set sqlprompt SQL>
set termout on
set verify off
set echo off
spool ora_query3_tmp0_1.res
SELECT STATUS FROM V$INSTANCE;
spool off
exit;
Output of SQL executing program:
SQL*Plus: Release 9.2.0.7.0 - Production on Fri Nov 23 07:31:09 2007
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected.
OPEN
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.7.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.7.0 - Production
SAPINST: End of output of SQL executing program D:\oracle\TVD\920/bin/sqlplus.
2007-11-23, 07:31:10 SAPINST ORACLE stop logging
================================================================================
2007-11-23, 07:31:10 SAPINST ORACLE start logging for
connect / as sysdba ;
CREATE TABLESPACE PSAP@SCHEMAID@ DATAFILE 'E:\oracle\TVD\sapdata4\psap@schemaid@_1\psap@[email protected]' SIZE 2000M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M LOGGING ONLINE PERMANENT EXTENT MANAGEMENT LOCAL AUTOALLOCATE SEGMENT SPACE MANAGEMENT AUTO ;
exit;
Output of SQL executing program:
SQL*Plus: Release 9.2.0.7.0 - Production on Fri Nov 23 07:31:10 2007
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected.
CREATE TABLESPACE PSAP@SCHEMAID@ DATAFILE 'E:\oracle\TVD\sapdata4\psap@schemaid@_1\psap@[email protected]' SIZE 2000M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M LOGGING ONLINE PERMANENT EXTENT MANAGEMENT LOCAL AUTOALLOCATE SEGMENT SPACE MANAGEMENT AUTO
ERROR at line 1:
ORA-02180: invalid option for CREATE TABLESPACE
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.7.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.7.0 - Production
SAPINST: End of output of SQL executing program D:\oracle\TVD\920/bin/sqlplus.
SAPINST found errors.
SAPINST The current process environment may be found in sapinst_ora_environment.log.
2007-11-23, 07:31:10 SAPINST ORACLE stop logging
And this is <b>our alert_SID.log</b>
Dump file d:\oracle\tvd\saptrace\background\alert_tvd.log
Thu Nov 22 16:27:45 2007
ORACLE V9.2.0.7.0 - Production vsnsta=0
vsnsql=12 vsnxtr=3
Windows 2000 Version 5.0 Service Pack 4, CPU type 586
Thu Nov 22 16:27:45 2007
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
SCN scheme 2
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up ORACLE RDBMS Version: 9.2.0.7.0.
System parameters with non-default values:
processes = 80
sessions = 96
shared_pool_size = 251658240
sga_max_size = 546906620
shared_pool_reserved_size= 24363663
enqueue_resources = 8000
control_files = E:\oracle\TVD\origlogA\cntrl\cntrlTVD.dbf, E:\oracle\TVD\sapdata1\system_1\cntrl\cntrlTVD.dbf, D:\oracle\TVD\saparch\cntrl\cntrlTVD.dbf
db_block_size = 8192
db_cache_size = 251658240
compatible = 9.2.0
log_archive_start = TRUE
log_archive_dest = D:\oracle\TVD\oraarch\TVDarch
log_buffer = 1048576
log_checkpoint_interval = 0
db_files = 254
fast_start_mttr_target = 900
log_checkpoints_to_alert = TRUE
control_file_record_keep_time= 30
dml_locks = 4000
transaction_auditing = FALSE
undo_management = AUTO
undo_tablespace = PSAPUNDO
undo_retention = 43200
remote_os_authent = TRUE
hash_join_enabled = FALSE
background_dump_dest = D:\oracle\TVD\saptrace\background
user_dump_dest = D:\oracle\TVD\saptrace\usertrace
core_dump_dest = D:\oracle\TVD\saptrace\background
optimizer_features_enable= 9.2.0
sort_area_size = 2097152
sort_area_retained_size = 0
db_name = TVD
open_cursors = 800
pga_aggregate_target = 324848844
workarea_size_policy = AUTO
statistics_level = typical
PMON started with pid=2
DBW0 started with pid=3
LGWR started with pid=4
CKPT started with pid=5
SMON started with pid=6
RECO started with pid=7
Thu Nov 22 16:27:48 2007
ARCH: STARTING ARCH PROCESSES
ARC0 started with pid=8
ARC1 started with pid=9
Thu Nov 22 16:27:48 2007
ARC0: Archival started
Thu Nov 22 16:27:48 2007
ARCH: STARTING ARCH PROCESSES COMPLETE
Thu Nov 22 16:27:48 2007
ARC1: Archival started
Thu Nov 22 16:27:48 2007
ARC0: Becoming the 'no FAL' ARCH
Thu Nov 22 16:27:48 2007
ARC1: Becoming the heartbeat ARCH
Thu Nov 22 16:27:48 2007
ARC0: Becoming the 'no FAL' ARCHARC0: Thread not mounted
Thu Nov 22 16:27:48 2007
ARC1: Becoming the heartbeat ARCHARC1: Thread not mounted
Thu Nov 22 16:27:49 2007
alter database mount exclusive
Thu Nov 22 16:27:49 2007
ORA-00202: controlfile: 'E:\oracle\TVD\origlogA\cntrl\cntrlTVD.dbf'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
Thu Nov 22 16:27:50 2007
ORA-205 signalled during: alter database mount exclusive...
Shutting down instance (abort)
License high water mark = 1
Instance terminated by USER, pid = 1768
Thu Nov 22 16:28:05 2007
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
SCN scheme 2
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up ORACLE RDBMS Version: 9.2.0.7.0.
System parameters with non-default values:
processes = 80
sessions = 96
shared_pool_size = 251658240
sga_max_size = 546906620
shared_pool_reserved_size= 24363663
enqueue_resources = 8000
control_files = E:\oracle\TVD\origlogA\cntrl\cntrlTVD.dbf, E:\oracle\TVD\sapdata1\system_1\cntrl\cntrlTVD.dbf, D:\oracle\TVD\saparch\cntrl\cntrlTVD.dbf
db_block_size = 8192
db_cache_size = 251658240
compatible = 9.2.0
log_archive_start = TRUE
log_archive_dest = D:\oracle\TVD\oraarch\TVDarch
log_buffer = 1048576
log_checkpoint_interval = 0
db_files = 254
fast_start_mttr_target = 900
log_checkpoints_to_alert = TRUE
control_file_record_keep_time= 30
dml_locks = 4000
transaction_auditing = FALSE
undo_management = AUTO
undo_tablespace = PSAPUNDO
undo_retention = 43200
remote_os_authent = TRUE
hash_join_enabled = FALSE
background_dump_dest = D:\oracle\TVD\saptrace\background
user_dump_dest = D:\oracle\TVD\saptrace\usertrace
core_dump_dest = D:\oracle\TVD\saptrace\background
optimizer_features_enable= 9.2.0
sort_area_size = 2097152
sort_area_retained_size = 0
db_name = TVD
open_cursors = 800
pga_aggregate_target = 324848844
workarea_size_policy = AUTO
statistics_level = typical
PMON started with pid=2
DBW0 started with pid=3
LGWR started with pid=4
CKPT started with pid=5
SMON started with pid=6
RECO started with pid=7
Thu Nov 22 16:28:08 2007
ARCH: STARTING ARCH PROCESSES
ARC0 started with pid=8
ARC0: Archival started
ARC1 started with pid=9
Thu Nov 22 16:28:08 2007
ARCH: STARTING ARCH PROCESSES COMPLETE
Thu Nov 22 16:28:08 2007
ARC0: Becoming the 'no FAL' ARCH
ARC0: Becoming the 'no FAL' ARCHARC0: Thread not mounted
Thu Nov 22 16:28:09 2007
ARC1: Archival started
Thu Nov 22 16:28:09 2007
ARC1: Becoming the heartbeat ARCH
ARC1: Becoming the heartbeat ARCHARC1: Thread not mounted
Thu Nov 22 16:28:11 2007
CREATE DATABASE TVD CONTROLFILE REUSE MAXLOGFILES 255 MAXLOGMEMBERS 3 MAXLOGHISTORY 1000 MAXDATAFILES 254 MAXINSTANCES 50 NOARCHIVELOG CHARACTER SET WE8DEC NATIONAL CHARACTER SET UTF8 DATAFILE 'E:\oracle\TVD\sapdata1\system_1\system.data1' SIZE 550M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M EXTENT MANAGEMENT LOCAL DEFAULT TEMPORARY TABLESPACE PSAPTEMP TEMPFILE 'E:\oracle\TVD\sapdata3\temp_1\temp.data1' SIZE 540M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M UNDO TABLESPACE PSAPUNDO DATAFILE 'E:\oracle\TVD\sapdata2\undo_1\undo.data1' SIZE 700M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M
LOGFILE GROUP 1 ('E:
oracle/TVD/origlogA/log_g11m1.dbf',
'D:
oracle/TVD/mirrlogA/log_g11m2.dbf') SIZE 50M REUSE ,
GROUP 2 ('E:
oracle/TVD/origlogB/log_g12m1.dbf',
'D:
oracle/TVD/mirrlogB/log_g12m2.dbf') SIZE 50M REUSE ,
GROUP 3 ('E:
oracle/TVD/origlogA/log_g13m1.dbf',
'D:
oracle/TVD/mirrlogA/log_g13m2.dbf') SIZE 50M REUSE ,
GROUP 4 ('E:
oracle/TVD/origlogB/log_g14m1.dbf',
'D:
oracle/TVD/mirrlogB/log_g14m2.dbf') SIZE 50M REUSE
Thu Nov 22 16:28:12 2007
Database mounted in Exclusive Mode.
Thu Nov 22 16:28:29 2007
Successful mount of redo thread 1, with mount id 1434613531
Assigning activation ID 1434613531 (0x5582771b)
Thread 1 opened at log sequence 1
Thu Nov 22 16:28:30 2007
ARC1: Media recovery disabled
Thu Nov 22 16:28:31 2007
Current log# 1 seq# 1 mem# 0: E:\ORACLE\TVD\ORIGLOGA\LOG_G11M1.DBF
Current log# 1 seq# 1 mem# 1: D:\ORACLE\TVD\MIRRLOGA\LOG_G11M2.DBF
Successful open of redo thread 1
Thu Nov 22 16:28:31 2007
ARC0: Media recovery disabled
Thu Nov 22 16:28:31 2007
SMON: enabling cache recovery
Thu Nov 22 16:28:32 2007
WARNING: Default passwords for SYS and SYSTEM will be used.
Please change the passwords.
Thu Nov 22 16:28:32 2007
create tablespace SYSTEM datafile 'E:\oracle\TVD\sapdata1\system_1\system.data1' SIZE 550M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M
EXTENT MANAGEMENT LOCAL online
Thu Nov 22 16:28:51 2007
Completed: create tablespace SYSTEM datafile 'E:\oracle\TVD\
Thu Nov 22 16:28:51 2007
create rollback segment SYSTEM tablespace SYSTEM
storage (initial 50K next 50K)
Completed: create rollback segment SYSTEM tablespace SYSTEM
Thu Nov 22 16:29:08 2007
ARC1: Media recovery disabled
Thu Nov 22 16:29:10 2007
CREATE UNDO TABLESPACE PSAPUNDO DATAFILE 'E:\oracle\TVD\sapdata2\undo_1\undo.data1' SIZE 700M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M
Thu Nov 22 16:29:35 2007
Successfully onlined Undo Tablespace 1.
Completed: CREATE UNDO TABLESPACE PSAPUNDO DATAFILE 'E:\orac
Thu Nov 22 16:29:36 2007
CREATE TEMPORARY TABLESPACE PSAPTEMP TEMPFILE 'E:\oracle\TVD\sapdata3\temp_1\temp.data1' SIZE 540M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M
Completed: CREATE TEMPORARY TABLESPACE PSAPTEMP TEMPFILE 'E:
Thu Nov 22 16:29:36 2007
ALTER DATABASE DEFAULT TEMPORARY TABLESPACE PSAPTEMP
Completed: ALTER DATABASE DEFAULT TEMPORARY TABLESPACE PSAPTE
Thu Nov 22 16:29:39 2007
SMON: enabling tx recovery
Thu Nov 22 16:29:39 2007
Beginning local checkpoint up to RBA [0x1.538b.10], SCN: 0x0000.000019d9
Completed checkpoint up to RBA [0x1.538b.10], SCN: 0x0000.000019d9
kwqplbsc: open notifier exception err 604
replication_dependency_tracking turned off (no async multimaster replication found)
Completed: CREATE DATABASE TVD CONTROLFILE REUSE MAXLOGFILES
Thu Nov 22 16:30:08 2007
ARC1: Media recovery disabled
Thu Nov 22 16:31:08 2007
ARC1: Media recovery disabled
Thu Nov 22 16:31:28 2007
Beginning log switch checkpoint up to RBA [0x2.2.10], SCN: 0x0000.00006489
Thread 1 advanced to log sequence 2
Thu Nov 22 16:31:28 2007
ARC1: Media recovery disabled
Thu Nov 22 16:31:29 2007
Current log# 2 seq# 2 mem# 0: E:\ORACLE\TVD\ORIGLOGB\LOG_G12M1.DBF
Current log# 2 seq# 2 mem# 1: D:\ORACLE\TVD\MIRRLOGB\LOG_G12M2.DBF
Thu Nov 22 16:32:08 2007
ARC1: Media recovery disabled
Thu Nov 22 16:33:08 2007
ARC0: Media recovery disabled
Thu Nov 22 16:33:08 2007
ARC1: Media recovery disabled
Thu Nov 22 16:33:16 2007
Completed checkpoint up to RBA [0x2.2.10], SCN: 0x0000.00006489
Thu Nov 22 16:33:26 2007
Beginning log switch checkpoint up to RBA [0x3.2.10], SCN: 0x0000.00009227
Thread 1 advanced to log sequence 3
Thu Nov 22 16:33:26 2007
ARC0: Media recovery disabled
Thu Nov 22 16:33:26 2007
Current log# 3 seq# 3 mem# 0: E:\ORACLE\TVD\ORIGLOGA\LOG_G13M1.DBF
Current log# 3 seq# 3 mem# 1: D:\ORACLE\TVD\MIRRLOGA\LOG_G13M2.DBF
Thu Nov 22 16:34:08 2007
ARC1: Media recovery disabled
Thu Nov 22 16:35:08 2007
ARC1: Media recovery disabled
Thu Nov 22 16:35:19 2007
Completed checkpoint up to RBA [0x3.2.10], SCN: 0x0000.00009227
Thu Nov 22 16:35:28 2007
Beginning log switch checkpoint up to RBA [0x4.2.10], SCN: 0x0000.0000b0ac
Thread 1 advanced to log sequence 4
Current log# 4 seq# 4 mem# 0: E:\ORACLE\TVD\ORIGLOGB\LOG_G14M1.DBF
Thu Nov 22 16:35:28 2007
ARC1: Media recovery disabled
Thu Nov 22 16:35:28 2007
Current log# 4 seq# 4 mem# 1: D:\ORACLE\TVD\MIRRLOGB\LOG_G14M2.DBF
Thu Nov 22 16:36:08 2007
ARC1: Media recovery disabled
Thu Nov 22 16:37:08 2007
ARC1: Media recovery disabled
Thu Nov 22 16:38:08 2007
ARC0: Media recovery disabled
Thu Nov 22 16:38:08 2007
ARC1: Media recovery disabled
Thu Nov 22 16:38:51 2007
Completed checkpoint up to RBA [0x4.2.10], SCN: 0x0000.0000b0ac
Thu Nov 22 16:38:59 2007
Beginning log switch checkpoint up to RBA [0x5.2.10], SCN: 0x0000.0000e12b
Thread 1 advanced to log sequence 5
Thu Nov 22 16:38:59 2007
Current log# 1 seq# 5 mem# 0: E:\ORACLE\TVD\ORIGLOGA\LOG_G11M1.DBF
Current log# 1 seq# 5 mem# 1: D:\ORACLE\TVD\MIRRLOGA\LOG_G11M2.DBF
Thu Nov 22 16:39:00 2007
ARC0: Media recovery disabled
Thu Nov 22 16:39:08 2007
ARC1: Media recovery disabled
Thu Nov 22 16:40:08 2007
ARC1: Media recovery disabled
Thu Nov 22 16:41:08 2007
ARC1: Media recovery disabled
Thu Nov 22 16:41:09 2007
Completed checkpoint up to RBA [0x5.2.10], SCN: 0x0000.0000e12b
Thu Nov 22 16:41:18 2007
Beginning log switch checkpoint up to RBA [0x6.2.10], SCN: 0x0000.0000ee94
Thread 1 advanced to log sequence 6
Current log# 2 seq# 6 mem# 0: E:\ORACLE\TVD\ORIGLOGB\LOG_G12M1.DBF
Current log# 2 seq# 6 mem# 1: D:\ORACLE\TVD\MIRRLOGB\LOG_G12M2.DBF
Thu Nov 22 16:41:18 2007
ARC1: Media recovery disabled
Thu Nov 22 16:42:08 2007
Fri Nov 23 07:38:10 2007
ARC1: Media recovery disabled
Regards,
Erick
Maybe you are looking for
-
just got a 24" Intel Core 2 duo(2006) off of ebay and everything was working fine and now the screen is getting all glitchey adn freezing up. everything I have been reading says to run the Apple Hardware Test, but I don't hav the original discs that
-
ITunes Match expired; I want to renew, but how?
I got the following email from iTunes Store today: Your subscription for iTunes Match expired on 11/14/12. Your complete music collection and playlists in iCloud are no longer available from your iOS devices, iTunes, or Apple TV. You will still be ab
-
Default Values For Foreign Trade Header Data
Hello, I have defined a price condition (ZPFR) to gather the price from the company to the custom office (the customs office through which the goods enter or leave the country). I want that price condition to be determined in the pricing procedure in
-
ITunes gives error code -54 when sync with my iphone 5
iTunes gives error code (-54) when i try to sync with my iphone5
-
How can i build table with two user name columne ?
How can I build view with two columns for user name ( one create and the other Can change also ) And to display full name ( the user name is the key but not display ) ?