ORA-16038, ORA-19502 and ORA-27063 messages in DB16

Hi experts,
I found below messages in DB16.(SAP version ECC 6.0 & oracle 10.2.0.2)
ORA-16038        Check 11.04.2011 21:00:04 - Time: 2011-04-11 09.47.15, line: ORA-16038 signalled during: ALTER DATABASE OPEN...
ORA-19502        Check 11.04.2011 21:00:04 - Time: 2011-04-11 05.25.41, line: ORA-19502: write error on file "/oracle/QO1/oraarch/QO1arch1_161
ORA-27063        Check 11.04.2011 21:00:04 - Time: 2011-04-11 05.26.19, line: ORA-27063: number of bytes read/written is incorrect
Please suggest me to avoid those errors and are those messages serious errors or not.
Thanks in advance !!!!!!!
Regards
Veera
Edited by: Veerab on Apr 12, 2011 11:49 AM

Hi!
Have you checked there are enough space on disk where arch-files are located? Those error messages normally indicate full disk.
Try to change or add another arch destination on another disk to be shore not losing any arch-files.
Use db-verify to check files for block corruption.
If you find block corruption, let your storage-people know and ask them to do a check of disk on OS-level.
Please verify your backups to be shore you doesn't have trouble with files backed up.
Regards
Audun
DBA

Similar Messages

Ora-06502:pl/sql and ora-06512 at sys.owa_util errors

Greetings -
I have just installed APEX 2.2 in my 9.2.0.7 database and am going through the exercises in the "2 Day+ Application Express Developer's Guide." I was making good progress, until I got to Chapter 5, How to Control Form Layout. I created the script "ht_emp", as instructed. Everything in the script works, except for the "create or replace trigger bi_ht_emp" part. It fails with the following errors:
ORA-06502: PL/SQL: numeric or value error ORA-06512: at "SYS.OWA_UTIL", lone 328 ORA-06512: at "SYS.HTP", line 862 ORA-06512: at "SYS.HTP", line 977 ORA-06512: at "SYS.HTP", line 995 ORA-06512: at "FLOWS_020200.WWV_FLOW_SW_API", line 428 ORA-01003: no statement parsed. I have confirmed that nls_length_semantics = BYTE
Any suggestions?
Thanks in advance - Gail

Scott -
Here's the part of the script that chokes --
CREATE OR REPLACE TRIGGER bi_ht_emp
BEFORE INSERT ON ht_emp
FOR EACH ROW
BEGIN
SELECT ht_emp_seq.nextval
INTO :new.emp_id
FROM DUAL;
:new.rec_create_date := SYSDATE;
END;
Thanks fro helping -
Gail

ORA-12505, TNS:listener and ORA-12514: TNS:listener

All,
Connecting to the database through the SQL Developer is giving me the error "ORA-12505, TNS:listener does not currently know of SID given in connect descriptor"
Database version : Oracle 10g XE
O/S : Windows 7, 32 bit
I have restarted my machine and tried but no luck. Tried from sqlplus also and the error was
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor"
Please provide me the steps to check and resolve this issue.
Thank you very much in advance.
Thanks

Here is what I have in my tnsnames.ora file
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = MSPL-08-09-D169.MSFTPNQ.com)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
Database name is 'XE'

ORA-17002 and ORA-17009 while calling Stored Procedures

Hi,
We are developing a JDBC application using WebLogic 6.0 as AppServer. When we
rolled out the application in production, things work fine for about a day or
so, then calls to Stored Procedures start giving ORA-17002 (io exception) and
ORA-17009 (Closed Statement) exceptions while calling Stored Procedures. Restarting
the server 'fixes' the problem for one more day.... We are not able to reproduce
this behaviour in test or development servers.
Can anybody suggest something.....
Regards,
Usman.

Usman wrote:
>
Hi,
We are developing a JDBC application using WebLogic 6.0 as AppServer. When we
rolled out the application in production, things work fine for about a day or
so, then calls to Stored Procedures start giving ORA-17002 (io exception) and
ORA-17009 (Closed Statement) exceptions while calling Stored Procedures. Restarting
the server 'fixes' the problem for one more day.... We are not able to reproduce
this behaviour in test or development servers.
Can anybody suggest something.....
Regards,
Usman.Hi. Describe how you are obtaining and using pool connections. Also, do download the
latest thin driver from Oracle, because they have recently fixed some serious
bugs in it.
Let me know,
Joe

ORA-01401 and ORA-12899 : "too large for column" error messages

I posted this already in the Database - General forum.
Sorry for the double post.
For the past 8hours, I have been googling about
the related ORA-01401 and ORA-12899 error
messages.
I noticed that ORA-01401 had been removed from the list
of error messages in Oracle 10g documentation.
http://download-west.oracle.com/docs/cd/B14117_01/server.101/b10744/e900.htm#sthref30
And, ORA-12899 has been added.
http://download-west.oracle.com/docs/cd/B14117_01/server.101/b10744/e12700.htm
1. Is there an official Oracle document (e.g. release notes) stating such facts? If so, please provide the link.
2. Why did Oracle change the error code and not just update ORA-01401?
3. Someone posted in http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:7143933880166
Even if installed Oracle is 10g, when he tried to "insert a 100 into a number(2).",
he supposedly got ORA-01401. So, is ORA-01401 still part of 10g or not?
I have yet to confirm this myself.
Sorry for being meticulous. Our customer just wants to know the
information for the 2nd question. It's hard to convince them without
showing official documents.
Thanks!

1)
Well, go to Metalink and check out Note 119119.1 (B.4) and Note:287754.1
2)
Such details are seldom published. One guess is what they changed altered the reason behind the message so using the same code would be a bad idea.
3)
If you are referring to the occurrence of ora-1401 from a select on a XE db, that may be a bug.

ORA-16038: log 1 sequence# 607 cannot be archived Error..

hi I Have a Problem to Start my Database.
My Database is Not in Archive Mode..
to know the detail error message is Given..
SQL> alter database open;
alter database open
ERROR at line 1:
ORA-16038: log 1 sequence# 607 cannot be archived
ORA-19809: limit exceeded for recovery files
ORA-00312: online log 1 thread 1:
'C:\ORACLE\PRODUCT\10.1.0\ORADATA\ORCL\REDO01.LOG'
I cam not recover My Database..
SQL> recover database;
ORA-00283: recovery session canceled due to errors
ORA-00264: no recovery required
I think recovery nolonger needed..
pls any one help me..

Hi
ORA-19809: limit exceeded for recovery filesYou have two options now. First is to set the db_recovery_file_dest_size to a bigger size (if you have disk space available ie) and second to use RMAN to delete the archivelogs.
Rgds
Adnan

Database is not opening due to ORA-16038: log 1 sequence# 16 cannot be arch

Dear All,
I am using oracle database 10g release2 on linux platform............
I am just moving logsegment type object from one tablespace to another tablespace.
But due to low space for redo log file my alter query was hanged on and not completed sucessfully. and the directory is showing full.
then i abort the query by shutdown database by using shutdown immediate command.
After that when i m trying to startup my databse in normal mode i am getting following error....
ERROR at line 1:
ORA-16038: log 1 sequence# 16 cannot be archived
ORA-19502: write error on file "", blockno (blocksize=)
ORA-00312: online log 1 thread 1:
'/var/oracle/oradata/clone/redofiles/REDO_RLOG_01a.dbf'
ORA-00312: online log 1 thread 1:
'/var/oracle/oradata/clone/redofiles/REDO_RLOG_03b.dbf'
so pls suggest me the solution to resolve this problem.

Check your Archive log location capacity , used & free.
If archive mount point/FRA is full , then either take backup archive with delete option into another mount point'
or
as part of emergency you can move those archives into different mount point.
Once there is enough free space, bring database back again. Post if any errors again

ORA-01031: insufficient privileges and shared memory realm does not exist

Hi all,
I came to a dead end to start oracle 10.2 database. I have searched on google and this forum, none of these solutions work for me. PS, I have installed 11g on my machine too.
I have set up ORACLE_SID,ORACLE_HOME to 10.2 database based on the tnsnames.ora.
follow is error message：
sqlplus sys as sysdba
SQL*Plus: Release 10.2.0.1.0 - Production on Wed Apr 3 02:09:54 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter password:
ERROR:
ORA-01031: insufficient privileges
sqlplus /nolog
SQL*Plus: Release 10.2.0.1.0 - Production on Wed Apr 3 02:10:55 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> conn / as sysdba
ERROR:
ORA-01031: insufficient privileges
SQL> conn scott/tiger
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
First I thought the instance has been start yet, but since I can't login with sysdba. I don't know what other options.
For 10.2, the tnsnames.ora
ORA102 =
+(DESCRIPTION =+
+(ADDRESS = (PROTOCOL = TCP)(HOST =XXX)(PORT = 1523))+
+(CONNECT_DATA =+
+(SERVER = DEDICATED)+
+(SERVICE_NAME = ora102)+
+)+
+)+
LISTENER_ORA102 =
+(ADDRESS = (PROTOCOL = TCP)(HOST =XXX)(PORT = 1523))+
EXTPROC_CONNECTION_DATA =
+(DESCRIPTION =+
+(ADDRESS_LIST =+
+(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC2))+
+)+
+(CONNECT_DATA =+
+(SID = PLSExtProc)+
+(PRESENTATION = RO)+
+)+
+)+
listener.ora:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /data/oracle/ora102)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC2))
(ADDRESS = (PROTOCOL = TCP)(HOST =XXXXX)(PORT = 1523))
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
)

try do this steps on server side:
1) sqlplus sys as sysdba
2) select open_mode from v$database;
show result 2 step

JBO-26030 and ORA-00054 error when updating a certain row

I have a page that saves data when you leave a cell in a table. Everything seems to work fine, but when you get to some cells the JBO-26030 error pops up and then no matter what you do you can't ever save anything on that cell. You can close everything down and reopen and change other cells, but when you go back to that cell the error message always pops up. I think it's mainly happening on the cell that is a drop down with 3 values (P, F, and NT). P is the value and key for the drop down.
Then when I go into the database through Toad I try to change the value just so see what happens and that's when I get the ORA-00054: resource busy and acquire with NOWAIT specified error. This again only happens when editing that row.
Any help is appreciated...Thanks!
Edited by: user10942416 on Aug 6, 2009 6:16 AM

This error is caused when the block property 'DML returning values' equals YES. This property was introduced as of forms 6. What does it do ? As per the on-line help of Forms, "A database update or insert action may initiate server-side triggers that cause alterations or additional changes in the data. In Release 6, when using an Oracle8 database server, Forms uses the DML Returning clause to immediately bring back any such changes. When this property is set to Yes, Forms will automatically update the client-side version of the data, and the user will not need to re-query the database to obtain the changed values". When this property is switched to yes the generated insert/update statement will contain the 'returning clause' and this clause is causing the error.
As far as I have tested, the only way at present, to get rid of this error is to set 'DML returing values' to NO. So, not to use this functionality.
See also:
http://support.oracle.co.uk/metalink/plsql/ml2_documents.showFrameDocument?p_database_id=NOT&p_id=143395.1
Please respond if this solution works for you.
Greets,
Guido Zeelen

Instance terminted with ORA-00445 and ORA-00494

Hi Folks,
Oracle 11g Instance terminated after ORA-00445 and ORA-00494. Not sure what is the problem didnot have this problem before. Can any body pls help?
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
TNS for Linux: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
Below is the message found in alertlog.
Archived Log entry 17939 added for thread 1 sequence 17973 ID 0xee1270c6 dest 1:
Thu Apr 19 02:32:15 2012
WARNING:io_getevents timed out 600 sec
Thu Apr 19 02:32:17 2012
WARNING:io_getevents timed out 600 sec
Thu Apr 19 02:33:32 2012
WARNING:io_getevents timed out 600 sec
Thu Apr 19 02:35:56 2012
Process 0x0xdfb80810 appears to be hung while dumping
Current time = 1203097316, process death time = 1203032607 interval = 60000
Attempting to kill process 0x0xdfb80810 with OS pid = 7563
OSD kill succeeded for process 0xdfb80810
Thu Apr 19 02:36:32 2012
WARNING:io_getevents timed out 600 sec
Thu Apr 19 02:38:11 2012
Errors in file /apps/opt/oracle/admin/diag/rdbms/vchsit2/vchsit2/trace/vchsit2_smco_8548.trc (incident=76297):
ORA-00445: background process "W000" did not start after 120 seconds
Incident details in: /apps/opt/oracle/admin/diag/rdbms/vchsit2/vchsit2/incident/incdir_76297/vchsit2_smco_8548_i76297.trc
Thu Apr 19 02:38:11 2012
Errors in file /apps/opt/oracle/admin/diag/rdbms/vchsit2/vchsit2/trace/vchsit2_arc2_7523.trc (incident=76329):
ORA-00494: enqueue [CF] held for too long (more than 900 seconds) by 'inst 1, osid 7315'
Incident details in: /apps/opt/oracle/admin/diag/rdbms/vchsit2/vchsit2/incident/incdir_76329/vchsit2_arc2_7523_i76329.trc
Thu Apr 19 02:38:11 2012
Fatal NI connect error 12537, connecting to:
(LOCAL=NO)
VERSION INFORMATION:
TNS for Linux: Version 11.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for Linux: Version 11.2.0.1.0 - Production
TCP/IP NT Protocol Adapter for Linux: Version 11.2.0.1.0 - Production
Time: 19-APR-2012 02:38:11
Tracing not turned on.
Tns error struct:
ns main err code: 12537
TNS-12537: TNS:connection closed
ns secondary err code: 12560
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
opiodr aborting process unknown ospid (2743) as a result of ORA-609
Thu Apr 19 02:38:12 2012
Trace dumping is performing id=[cdmp_20120419023812]
Killing enqueue blocker (pid=7315) on resource CF-00000000-00000000 by (pid=7523)
by killing session 6.1
Killing enqueue blocker (pid=7315) on resource CF-00000000-00000000 by (pid=7523)
by terminating the process
ARC2 (ospid: 7523): terminating the instance due to error 2103
Instance terminated by ARC2, pid = 7523
Thu Apr 19 10:43:07 2012

Hi;
Please see:
ORA-00445: Background Process "xxxx" Did Not Start After 120 Seconds [ID 1345364.1]
Regard
Helios

ORA-27101: shared memory realm does not exist and ORA-01139: RESETLOGS

HI ALL,
After the oracle has installed on a solaries server successfully, i am unable to login into oracle database.
Below are the errors messages :
1) ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
SVR4 Error: 2: No such file or directory
2) Media recovery complete.
alter database open resetlogs
ERROR at line 1:
ORA-01139: RESETLOGS option only valid after an incomplete database recovery.
and When i try to login into oracle as root .
this is the error :
sqlplus / as sysdba
SQL*Plus: Release 10.2.0.4.0 - Production on Fri Feb 12 15:52:49 2010
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
ld.so.1: oracle: fatal: libskgxp10.so: open failed: No such file or directory
ERROR:
ORA-12547: TNS:lost contact
my Operating system details :
SunOS Blade3-Chassis2 5.10 Generic_142900-03 sun4v sparc SUNW,Netra-CP3060
Anyone please help me here. waiting for your reply.
Below are the ORACLE_SID Details :
1) echo $ORACLE_SID ----- > ems
2)ps -eaf | grep smon -------> ora_smon_ems
do you need any data?
Edited by: user8959150 on Feb 11, 2010 7:19 PM

Hi
We mostly receive this error message ( ORA-27101: shared memory realm does not exist and ORA-01139)
When our SGA_MAX_SIZE is greater than 1.7 G.b on
You again configure your sga size
and sga_max_size paramete will not greater than 1.7 G.b
Hope your database will work correctly.
for test purpose you set all your init.ora parameter
db_cache_size=512m
db_keep_cache_size=64m
db_recycle_cache_size=16m
java_pool_size=8m
large_pool_size=16m
shared_pool_size=256m
shared_pool_reserved_size=64m
sga_max_size=1600m
sga_max_size will not be grater than combination of of db_cache_size db_keep_cache_size,db_recycle_cache_sizejava_pool_size+share_pool_size+share_pool_reserved_size
Hope it will work fine.
Regard
Abdul Hameed Malik
[email protected]

Ora 600 and ora 7445 error in oracle 10g r2

hi all,
we are using Oracle 10g r2.
os is windows 2003 server,
ram is 4 gb.
front end is java .
we got a below mentioned errors.
i got the RA-00600: internal error code, arguments: [qerghFetch:inc], [], [], [], [], [], [], [],
and ORA-07445: exception encountered: core dump [ACCESS_VIOLATION] [unable_to_trans_pc] [PC:0x61F04AC9] [ADDR:0xC] [UNABLE_TO_READ] []
and Error 0 in kwqmnpartition(), aborting txn errors.
for aug 3 11.42.47 we got a ora 600 error after that through front end (java) users can't able to connect the database.the not able to executed the query session disconnected error.
what is reason for theis error . how it will rectifiy.?
pls advice.Below i attached the alret log message .
Sun Aug 02 04:04:24 2009
Error 0 in kwqmnpartition(), aborting txn
Sun Aug 02 05:48:10 2009
Error 0 in kwqmnpartition(), aborting txn
Sun Aug 02 05:49:10 2009
Error 0 in kwqmnpartition(), aborting txn
Sun Aug 02 07:38:49 2009
Thread 1 advanced to log sequence 1732
Current log# 3 seq# 1732 mem# 0: E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO03.LOG
Sun Aug 02 07:44:14 2009
Error 0 in kwqmnpartition(), aborting txn
Sun Aug 02 07:45:14 2009
Error 0 in kwqmnpartition(), aborting txn
Sun Aug 02 22:00:26 2009
Thread 1 advanced to log sequence 1733
Current log# 1 seq# 1733 mem# 0: E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO01.LOG
Mon Aug 03 07:08:15 2009
Thread 1 advanced to log sequence 1734
Current log# 2 seq# 1734 mem# 0: E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO02.LOG
Mon Aug 03 09:28:23 2009
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 09:30:27 2009
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 11:42:47 2009
Errors in file e:\oracle\product\10.2.0\admin\orcl\udump\orcl_ora_6012.trc:
ORA-00600: internal error code, arguments: [qerghFetch:inc], [], [], [], [], [], [], []
Mon Aug 03 13:20:00 2009
Thread 1 advanced to log sequence 1735
Current log# 3 seq# 1735 mem# 0: E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO03.LOG
Mon Aug 03 16:07:07 2009
Errors in file e:\oracle\product\10.2.0\em_2\rdbms\trace\orcl_ora_4756.trc:
ORA-07445: exception encountered: core dump [ACCESS_VIOLATION] [unable_to_trans_pc] [PC:0x61F04AC9] [ADDR:0xC] [UNABLE_TO_READ] []
Mon Aug 03 16:07:11 2009
Process m000 died, see its trace file
Mon Aug 03 16:07:11 2009
ksvcreate: Process(m000) creation failed
Mon Aug 03 16:08:37 2009
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 16:10:40 2009
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 17:25:05 2009
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 17:27:11 2009
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 17:32:19 2009
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 17:33:24 2009
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 18:52:08 2009
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 18:54:09 2009
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 19:05:33 2009
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 19:09:02 2009
Errors in file e:\oracle\product\10.2.0\em_2\rdbms\trace\orcl_ora_5132.trc:
ORA-07445: exception encountered: core dump [ACCESS_VIOLATION] [unable_to_trans_pc] [PC:0x7C34126B] [ADDR:0x0] [UNABLE_TO_WRITE] []
Mon Aug 03 19:10:27 2009
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn

Hi reshumakur
As this is your PRODUCTION system THEN_ The best help to offer in case of ORA-600, and ORA-7445 is to open SR with metalink. Submit with the SR the following
1- Alert log
2- Trace files (in ur case e:\oracle\product\10.2.0\admin\orcl\udump\orcl_ora_6012.trc: and e:\oracle\product\10.2.0\em_2\rdbms\trace\orcl_ora_4756.trc:)
3- Describe what was happening when you had these errors.
Try to avoid free help when you have ORA-600 and ORA-07445. This errors could be becuase of BUGS. Oracle Support will know this from the call stack in the trace file.
Then Do your best to patch 10.2.0.4 and the latest CPU patch.
Good Luck

ORA-03113 and ORA-03114 problems

Hi,
I'm experimenting Oracle8i. I'm installing 8.1.7 to RedHat Linux 7.0 out of box without recompiling the kernel. I set the SHMMAX to 0.5*258MB memory on the machine by echoing the number to /proc/sys/kernel/shmmax.
I checked that the system meets the requirements of Oracle's Installation Guide except SEMOPM. The RedHat Linux 7.0 sets it to 32, but Oracle requires 100.
I chose Oracle8i EE Typical Installation. The installation was ok to the point of running root.sh. Several syntax errors occur from root.sh. But they are minor syntax errors. I checked the code, regardless of errors, the scripts accomplished what it intends to do. The installation continued. I choose automatic configure Net8 when it ran Net8 Configuration Assistant and the Net8 Configuration was completed successful.
When it started Oracle Database Configuration Assistant, it created a database. But when it initialized the database, error messages ORA-03114 and ORA-03113 appeared many times. Each time, I chose to ignore. The final message was "Database creation completed with warnings."
After installation, I ran svrmgrl
$svrmgrl
SVRMGR> connect INTERNAL
Connected.
SVRMGR> startup
ORA-03113 end-of-file on communication channel
Checking the meaning of error messages, it says that if ORA-03113 occurs during a connection attempt, check the setup files for the appropriate Net8 driver and confirm Net8 software is correctly installed on the server.
During installation, I chose Local naming method. There are following files in $ORACLE_HOME/network/admin/
listener.ora
sqlnet.ora
tnsnames.ora
shrept.lst
To my layman's eye, they looked ok. I can even telnet to the linux machine with database name, although I don't know how the machine has acquired the alias without any changes to /etc/named.conf nor any changes to any files in /var/named directory.
Please tell me what is correctly installed Net8? or what went wrong and how I should fix the problem.
Thanks,
Wayne
null

I seem to have 8.1.7 creating a database with RH Linux 7.1 now. This was an important clue, since 7.1 hiccups 65% into the link phase of installation, thereby requiring the stubs patch to be run at that time, whereas 7.0 runs quite happily through the install & link without using the patch.
HOWEVER... before invoking dbassist to create the database under 7.1, you apparently need to export ASSUME_LD_LIBRARY = 2.2.5, etc., again, as you would do for the first time installing under RH 7.0.
null

PL/SQL Debugger and ORA-12541: TNS:no listener

I installed SQL Developer on my PC (Windows XP). I have a connection to my devlopment database on server (Solaris, Oracle 9.2.0.6).
I create a procedure and compile it successfully. Now I want to 'debug' it. I click on the Debugger (ladybug), set my parameter value and click on 'OK' in the Debug PL/SQL window. In the Debugging log I get:
Connecting to the database Banner devl.
Executing PL/SQL: ALTER SESSION SET PLSQL_DEBUG=TRUE
Executing PL/SQL: ALTER SESSION SET PLSQL_COMPILER_FLAGS=INTERPRETED
Executing PL/SQL: CALL DBMS_DEBUG_JDWP.CONNECT_TCP( '130.207.xxx.xxx', '4000' )
ORA-30683: failure establishing connection to debugger
ORA-12541: TNS:no listener
ORA-06512: at "SYS.DBMS_DEBUG_JDWP", line 68
ORA-06512: at line 1
Process exited.
Disconnecting from the database Banner devl.
What listener is it looking for on my own machine? I don't have J Developer and I'm using a remote database.
I found the thread on setting the 'Prompt for Debugger Host for Database Debugging'. Enabled that and tried debugging again. Got the prompt for entering the IP of the Debugger Host. Tried the database server. So I got:
Connecting to the database Banner devl.
Executing PL/SQL: ALTER SESSION SET PLSQL_DEBUG=TRUE
Executing PL/SQL: ALTER SESSION SET PLSQL_COMPILER_FLAGS=INTERPRETED
Executing PL/SQL: CALL DBMS_DEBUG_JDWP.CONNECT_TCP( '130.207.xxx.xxx', '4000' )
ORA-30683: failure establishing connection to debugger
ORA-12541: TNS:no listener
ORA-06512: at "SYS.DBMS_DEBUG_JDWP", line 68
ORA-06512: at line 1
Process exited.
Disconnecting from the database Banner devl.
The answer is probably right in front of me, but I just can't see it. Is something mission on the database server?

I am running SQL Developer on Windows XP Professional and I was experiencing the same problem.
When I started the debugger I got the message from Win XP that Windows Firewall will block some features of the program (being the PC at work I don't have admin privileges on it). I accepted this, not knowing which features would be blocked.
Then, the debugger was just hanging. After a while it timed out and came back with exactly this error message.
I restarted the SQLDeveloper and tried again without much success. This time though I didn't get the Windows Firewall message.
After another few trial and errors I figured out that the Firewall must be blocking connection establishement on the client site i.e. on my PC.
It was the CALL DBMS_DEBUG_JDWP.CONNECT_TCP that was hanging.
As the system admin disabled the Windows Firewall on my PC the debugger started working. We have a luxury to disable local firewalls as there is one that protects our network from outside traffic. People who cannot afford to disable the Windows firewall will have to tinker with the firewall itself and configure it in such a way that it allows traffic on certain port range (4000...4999). Then in SQLdeveloper you will have to go to Tools->Preferences->Debugger and tick Debugging Port Range. The chosen range should match the port range on the Windows Firewall side.
By the way, in the call to CALL DBMS_DEBUG_JDWP.CONNECT_TCP the first parameter is the IP address of your PC and the second one is the port used for debugger connection with the database server. If for some reason the IP address chosen by the debugger is not your IP address (you can find your IP address as follows: Start->Run->cmd; then use command ipconfig), you will have to tick "Prompt for Debugger Host for Database Debugging" on your Debugger Preferences. This way you'll be able to chose the IP address yourself.
Good luck!

ORA-604 and ORA-4031 during installation of SAP

Hi,
I tried to install Oracle 10.2.0.2 on Windows 2003 with SAP R3E 47X2.
However, during the installation on the Database Load phases it pops up a ORA-604 and ORA-4031 error log. It was unable to completed the Database Load phase showed as R3 load jobs: running 1, waiting 0.
I tried to set the share pool in init.ora as shared_pool_size = 40000000. It still show up as shared memory issue.
The log shows as,
E:\usr\sap\IDE\SYS\exe\run/R3load.exe: START OF LOG: 20081201110818
E:\usr\sap\IDE\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#12 $ SAP
E:\usr\sap\IDE\SYS\exe\run/R3load.exe: version R6.40/V1.4 [UNICODE]
Compiled Dec 15 2005 22:22:21
E:\usr\sap\IDE\SYS\exe\run/R3load.exe -dbcodepage 4103 -i C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\ORA\UC\DB/SAPSSEXC.cmd -l C:\Program Files\sapinst_instdir\R3E47X2\SYSTEM\ABAP\ORA\UC\DB/SAPSSEXC.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
DbSl Trace: Failed to register client info: orc=604
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
DbSl Trace: Error in exec_immediate()
DbSl Trace: ORA-604 occurred when executing SQL statement (parse error offset=15)
(DB) ERROR: DDL statement failed
(TRUNCATE TABLE "DYNPSOURCE")
DbSlExecute: rc = 99
(SQL error 604)
error message returned by DbSl:
ORA-00604: error occurred at recursive SQL level 1
ORA-04031: unable to allocate 4120 bytes of shared memory ("shared pool","select user#,type# from user...","Typecheck","kgghteInit")
(DB) INFO: disconnected from DB
E:\usr\sap\IDE\SYS\exe\run/R3load.exe: job finished with 1 error(s)
E:\usr\sap\IDE\SYS\exe\run/R3load.exe: END OF LOG: 20081201110858
Could anyone help me about it?
Thanks.

hi Nikhuj,
I reset the installation and however endup the installation still have an error. Please help me to check with the following:
SQL> connect system
Enter password:
ERROR:
ORA-00604: error occurred at recursive SQL level 2
ORA-04031: unable to allocate 4120 bytes of shared memory ("shared
pool","select ts#,file#,block#,nvl(...","Typecheck","kgghtInit")
SQL> show parameters shared_pool;
NAME                   TYPE     VALUE
shared_pool_reserved_size   big integer 12881756
shared_pool_size         big integer 124M
SQL> alter system set shared_pool_size=40000000;
alter system set shared_pool_size=40000000
ERROR at line 1:
ORA-02097: parameter cannot be modified because specified value is invalid
ORA-04034: unable to shrink pool to specified size
As I had changed the parameter in initsmpl.ora shared pool from 10000000 to 40000000. The log as below was showing that:
SAPAPPL1.log:
Error accessing package DBMS_APPLICATION_INFO
Connected.
(IMP) INFO: import of LXE_PPX__1 completed (1 rows) #20081201200124
(DB) INFO: LXE_PPX__1~0 created #20081201200124
DbSl Trace: Error in exec_immediate()
DbSl Trace: ORA-604 occurred when executing SQL statement (parse error offset=34)
(DB) ERROR: DDL statement failed
(CREATE INDEX "LXE_PPX__1~CNT" ON "LXE_PPX__1" ( "T_LANG" , "S_LANG" ,
"DOMATYP" , "DOMANAM" , "USAGECNT" ) TABLESPACE PSAPIDE STORAGE (INITIAL 0 NEXT
0000010240K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) )
DbSlExecute: rc = 99
(SQL error 604)
error message returned by DbSl:
ORA-00604: error occurred at recursive SQL level 1
ORA-04031: unable to allocate 4120 bytes of shared memory ("shared pool","CREATE
UNIQUE INDEX "PA0399~...","Typecheck","kgghteInit")
(DB) INFO: disconnected from DB
E:\usr\sap\IDE\SYS\exe\run/R3load.exe: job finished with 1 error(s)
E:\usr\sap\IDE\SYS\exe\run/R3load.exe: END OF LOG: 20081201200129
SAPAPPL2.log:
(DB) INFO: TCN2T~0 created #20081201200843
DbSl Trace: Error in exec_immediate()
DbSl Trace: ORA-604 occurred when executing SQL statement (parse error offset=0)
(DB) ERROR: DDL statement failed
(CREATE TABLE "TCN41" ( "MANDT" VARCHAR2(9) DEFAULT '000' NOT NULL , "PLNAW"
VARCHAR2(3) DEFAULT ' ' NOT NULL , "PROFIDNETZ" VARCHAR2(21) DEFAULT ' ' NOT NULL
, "FLG_ERF_H" VARCHAR2(3) DEFAULT ' ' NOT NULL , "ESOKZ" VARCHAR2(3) DEFAULT ' '
NOT NULL , "EKORG" VARCHAR2(12) DEFAULT ' ' NOT NULL , "KSTAR_FRMD" VARCHAR2(30)
DEFAULT ' ' NOT NULL , "STEUS_WORK" VARCHAR2(12) DEFAULT ' ' NOT NULL ,
"STEUS_FRMD" VARCHAR2(12) DEFAULT ' ' NOT NULL , "STEUS_PRIM" VARCHAR2(12)
DEFAULT ' ' NOT NULL , "KSTAR_COST" VARCHAR2(30) DEFAULT ' ' NOT NULL ,
"KSTAR_SERV" VARCHAR2(30) DEFAULT ' ' NOT NULL , "STEUS_SERV" VARCHAR2(12)
DEFAULT ' ' NOT NULL , "DAUNE" VARCHAR2(9) DEFAULT ' ' NOT NULL , "ARBEH"
VARCHAR2(9) DEFAULT ' ' NOT NULL , "WAERS" VARCHAR2(15) DEFAULT ' ' NOT NULL ,
"SLWID" VARCHAR2(21) DEFAULT ' ' NOT NULL , "LVARI" VARCHAR2(6) DEFAULT ' ' NOT
NULL , "INDET" VARCHAR2(3) DEFAULT ' ' NOT NULL , "BUKRS" VARCHAR2(12) DEFAULT '
' NOT NULL , "AOB_KEY" VARCHAR2(3) DEFAULT ' ' NOT NULL , "VORNR_DEL" VARCHAR2
(12) DEFAULT ' ' NOT NULL , "TERKZ" VARCHAR2(3) DEFAULT ' ' NOT NULL , "AUART"
VARCHAR2(12) DEFAULT ' ' NOT NULL , "WERKS" VARCHAR2(12) DEFAULT ' ' NOT NULL ,
"DISPO" VARCHAR2(9) DEFAULT ' ' NOT NULL , "RSCHL_OFER" VARCHAR2(18) DEFAULT ' '
NOT NULL , "RSCHL_OFRD" VARCHAR2(18) DEFAULT ' ' NOT NULL , "RSCHL_UFER"
VARCHAR2(18) DEFAULT ' ' NOT NULL , "RSCHL_UFRD" VARCHAR2(18) DEFAULT ' ' NOT
NULL , "RSCHL_OCST" VARCHAR2(18) DEFAULT ' ' NOT NULL , "RSCHL_UCST" VARCHAR2(18)
DEFAULT ' ' NOT NULL , "GR_PRF_GR" VARCHAR2(12) DEFAULT ' ' NOT NULL ,
"GR_PRF_NAM" VARCHAR2(36) DEFAULT ' ' NOT NULL , "FHORI" VARCHAR2(9) DEFAULT ' '
NOT NULL , "NETSTUFE" VARCHAR2(6) DEFAULT '00' NOT NULL , "VAGRP" VARCHAR2(9)
DEFAULT ' ' NOT NULL , "MSGTY" VARCHAR2(3) DEFAULT ' ' NOT NULL , "AOB_DARST"
VARCHAR2(3) DEFAULT ' ' NOT NULL , "VRG_DARST" VARCHAR2(3) DEFAULT ' ' NOT NULL ,
"NO_DISP" VARCHAR2(3) DEFAULT ' ' NOT NULL , "COLKZ_ELEM" VARCHAR2(33) DEFAULT '
' NOT NULL , "COLKZ_TEIL" VARCHAR2(33) DEFAULT ' ' NOT NULL , "COLKZ_MLST"
VARCHAR2(33) DEFAULT ' ' NOT NULL , "COLKZ_DOKU" VARCHAR2(33) DEFAULT ' ' NOT
NULL , "COLKZ_MAT" VARCHAR2(33) DEFAULT ' ' NOT NULL , "VSPRF" VARCHAR2(21)
DEFAULT ' ' NOT NULL , "CLASF" VARCHAR2(3) DEFAULT ' ' NOT NULL , "PROFILE_ID"
VARCHAR2(30) DEFAULT ' ' NOT NULL , "BALK_PROF" VARCHAR2(36) DEFAULT ' ' NOT NULL
, "KBED" VARCHAR2(3) DEFAULT ' ' NOT NULL , "KKALKR" VARCHAR2(3) DEFAULT ' ' NOT
NULL , "LSTVAR" VARCHAR2(36) DEFAULT ' ' NOT NULL , "MATKL" VARCHAR2(27) DEFAULT
' ' NOT NULL , "MATEXIT" VARCHAR2(3) DEFAULT ' ' NOT NULL , "EKGRP" VARCHAR2(9)
DEFAULT ' ' NOT NULL , "MATKL_FRMD" VARCHAR2(27) DEFAULT ' ' NOT NULL ,
"EKGRP_FRMD" VARCHAR2(9) DEFAULT ' ' NOT NULL , "POSNR_MAT" VARCHAR2(12) DEFAULT
'0000' NOT NULL , "SCHED_END" VARCHAR2(3) DEFAULT ' ' NOT NULL , "SCEND_ACT"
VARCHAR2(3) DEFAULT ' ' NOT NULL , "NT_SEARCH1" VARCHAR2(6) DEFAULT ' ' NOT NULL
, "NT_SEARCH2" VARCHAR2(6) DEFAULT ' ' NOT NULL , "NT_SEARCH3" VARCHAR2(6)
DEFAULT ' ' NOT NULL , "MFLIC" VARCHAR2(9) DEFAULT ' ' NOT NULL , "MEINH_FRMD"
VARCHAR2(9) DEFAULT ' ' NOT NULL , "MEINH_SERV" VARCHAR2(9) DEFAULT ' ' NOT NULL
, "KSTAR_MATVORPL" VARCHAR2(30) DEFAULT ' ' NOT NULL , "KZERB" VARCHAR2(3)
DEFAULT ' ' NOT NULL , "VALID" VARCHAR2(21) DEFAULT ' ' NOT NULL , "VALID_VG"
VARCHAR2(21) DEFAULT ' ' NOT NULL , "SUBST" VARCHAR2(21) DEFAULT ' ' NOT NULL ,
"SUBST_VG" VARCHAR2(21) DEFAULT ' ' NOT NULL , "FPART" VARCHAR2(6) DEFAULT ' '
NOT NULL ) TABLESPACE PSAPIDE STORAGE (INITIAL 65536 NEXT 0000000040K MINEXTENTS
0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) )
DbSlExecute: rc = 99
(SQL error 604)
error message returned by DbSl:
ORA-00604: error occurred at recursive SQL level 2
ORA-04031: unable to allocate 4040 bytes of shared memory ("shared pool","select
i.obj#,i.ts#,i.file#,...","Typecheck","seg:kggfaAllocSeg")
(DB) INFO: disconnected from DB
E:\usr\sap\IDE\SYS\exe\run/R3load.exe: job finished with 1 error(s)
E:\usr\sap\IDE\SYS\exe\run/R3load.exe: END OF LOG: 20081201200843
SAPAPPL0.log:
(DB) INFO: PA0398~0 created #20081201200124
(DB) INFO: PA0399 created #20081201200124
(IMP) INFO: import of PA0399 completed (12 rows) #20081201200124
DbSl Trace: Error in exec_immediate()
DbSl Trace: ORA-4031 occurred when executing SQL statement (parse error offset=0)
(DB) ERROR: DDL statement failed
(CREATE UNIQUE INDEX "PA0399~0" ON "PA0399" ( "MANDT", "PERNR", "SUBTY",
"OBJPS", "SPRPS", "ENDDA", "BEGDA", "SEQNR" ) TABLESPACE PSAPIDE STORAGE (INITIAL
0 NEXT 0000000080K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) )
DbSlExecute: rc = 99
(SQL error 4031)
error message returned by DbSl:
ORA-04031: unable to allocate 4120 bytes of shared memory ("shared pool","CREATE
UNIQUE INDEX "PA0399~...","Typecheck","kgghteInit")
(DB) INFO: disconnected from DB
E:\usr\sap\IDE\SYS\exe\run/R3load.exe: job finished with 1 error(s)
E:\usr\sap\IDE\SYS\exe\run/R3load.exe: END OF LOG: 20081201200129

ORA-16038, ORA-19502 and ORA-27063 messages in DB16

Similar Messages

Maybe you are looking for