ORA-19502 & ORA-19502 when try to backup using rman

I'm trying to backup database to a specific folder but it's failing:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 04/11/2013 22:41:59
ORA-19502: write error on file "/home/backup/rmanbackup/bak_11_1_812500536_test", block number 3520128 (block size=8192)
ORA-27072: File I/O error
Linux-x86_64 Error: 11: Resource temporarily unavailable
Additional information: 4
Additional information: 3520128
Additional information: 274432
command for backup is following:
backup database format '/home/backup/rmanbackup/bak_%s_%p_%t_test';
Can you help me to solve the problem.

Levi Pereira wrote:
When asking a question always provide your database and OS version (e.g. Oracle 11.2.0.3)OS: SUSE Linux Enterprise Server 10 (x86_64). Oracle Version: 11.1.0.7.0
>
Are you using local or network filesystem (such as NFS)?Local
Edited by: 996454 on Apr 14, 2013 2:06 AM

Similar Messages

My kids accidentally reseat my i phone and when try to backup with I cloud it didn't back my photos constants and every thing

My kids accidentally reseat my i phone and when try to backup with I cloud it didn't back my photos constants and every thing. Plz help me I rally want my photos back again

Your problem is that she used your icloud ID to connect to icloud and thus had all your data synced to her device. Contacts are not saved in a backup to icloud, since they are stored independently in the Contacts section of icloud. If someone deletes them, they are gone. If you had them on the PC would they be available in some backup you frequently make of the PC?

Error in Database backup using RMAN.

Hi
While taking full online backup using RMAN i got the following error.
ORA-19566: exceeded limit of 0 corrupt blocks for file /oracle/DEV/sapdata2/dev640_6/dev640.data6
Please help me how to resolve this issue.

Hi,
Please perform DBverify Job and Also analyze the alert<SID>.log file for your Database to get more information about such logical or physical corruption. You may require Block level recovery for the complained DB Files. Please refer this useful document " [Early Detection and Correction of Data Block Corruptions Using RMAN |http://www.ioug.org/client_files/members/select_pdf/04q4/RMAN.pdf]" and share the same with your Oracle DBA.
You can execute the following commands to get information about corrupted block(s), if its there.
select * from v$backup_corruption;
select * from v$database_block_corruption;
Regads,
Bhavik G. Shroff

PERFORMING A TEST BACKUP (VALIDATE BACKUP) USING RMAN

제품 : RMAN
작성날짜 : 2002-05-30
PERFORMING A TEST BACKUP (VALIDATE BACKUP) USING RMAN
=====================================================
PURPOSE
RMAN을 이용하여 Test Backup을 수행하기 위한 정보를 제공한다.
EXPLANATION
8.1.7 부터 RMAN에서 BACKUP command에 VALIDATE keyword를 사용할 수 있게 되었다
이 명령의 수행은 다음과 같은 작업을 수행한다.
- Datafile의 physical and logical corruption을 check한다.
- 모든 database file들이 존재하는지, 그리고 올바른 위치에 있는지를 검증한다.
RMAN은 실제적으로 backupset을 생성하지 않는다 그러나 그것들이 backup될 수
있는지 없는지를 결정하기 위해서 기술된 file들을 scan한다.
BACKUP VALIDATE 는 backup job을 수행시 수행되는 것을 제외하고는
RESTORE VALIDATE와 거의 비슷하다.
EXAMPLE
아래와 같은 command들을 수행하여 backup하고자 하는 database file과 archived redo
log들이 실제로 backup될 수 있는지를 검증할 수 있다.
RUN {
ALLOCATE CHANNEL ch1 TYPE 'sbt_tape';
BACKUP VALIDATE
DATABASE
ARCHIVELOG ALL;
Note: MAXCORRUPT or PROXY parameter는 VALIDATE option과 함께 사용할 수 없다.
REFERENCE DOCUMENTS
NOTE:121109.1

Clint,
I ran the command lines you wrote me after i placed the database in Startup MOUNT state, RMAN gave error messages that the database needs to be open:
RMAN> SQL 'ALTER TABLESPACE USERTB2 OFFLINE IMMEDIATE';
sql statement: ALTER TABLESPACE USERTB2 OFFLINE IMMEDIATE
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of sql command on default channel at 11/04/2005 15:31:33
RMAN-11003: failure during parse/execution of SQL statement: ALTER TABLESPACE US
ERTB2 OFFLINE IMMEDIATE
ORA-01109: database not open
Then I ran the same command lines after I opened the database, RMAN gave error messages that "offline immediate disallowed unless media recovery enabled":
RMAN> SQL 'ALTER TABLESPACE USERTBS2 OFFLINE IMMEDIATE';
sql statement: ALTER TABLESPACE USERTBS2 OFFLINE IMMEDIATE
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of sql command on default channel at 11/04/2005 15:48:17
RMAN-11003: failure during parse/execution of SQL statement: ALTER TABLESPACE US
ERTBS2 OFFLINE IMMEDIATE
ORA-01145: offline immediate disallowed unless media recovery enabled
I am stuck again and need your help!
Thank you,
Mitra

Cold backup using RMAN

Dear All,
db_version :10.2.0.4
os_version:Window 2003 server
Environment:Test
I wish to perform cold backup using RMAN for the same i want to know following :
1. What is the script / command ?
2. How to restore cold backup completely ( ex:- if i lost all my data,redo and archives )
3. Is it mandatory to open the database in RESETLOG mode after recovery ( since i have a cold backup ) ?
Thanks in advance

A "Cold" Backup is called a "Consistent" Backup.
See http://download.oracle.com/docs/cd/B19306_01/backup.102/b14192/bkup003.htm#sthref297
Backup :
From the RMAN command line :
SHUTDOWN IMMEDIATE
STARTUP MOUNT
BACKUP DATABASE
BACKUP CURRENT CONTROLFILE -- to get the controlfile in a separate backupsetRestore :
STARTUP MOUNT
RESTORE DATABASE
ALTER DATABASE OPENIf you use an SPFILE, you can have an SPFILE backup included automatically with the controlfile backupset with CONFIGURE CONTROLFILE AUTOBACKUP ON and CONFIGURE CONTROLFILE AUTOBACKUP FORMAT ...
Read the documentation.
Hemant K Chitale

Backup using RMAN

Hi,
I want to perform the first backup with RMAN and I used this command and I got error:
RMAN> BACKUP AS COPY DATABASE;
can not backup or copy active file in noarchivelog mode.
But in order to turn on the log_mode to ARCHIVELOG, first I need to do shutdown the db and perform the backup. Right?
So how can I get my first backup using RMAN if the log mode is in NOARCHIVELOG mode?
I also performed controlfile autobackup on but I'm not sure the controlfiles are being backed up. How can I verify this and where I can find the controlfile backup file?
Thanks,

Hi
Yes, you must shutdown the database and set it to start in ARCHIVELOG mode.
After that you can connect to the rman catalog and the target database and execute a backup.
eg. RMAN> backup database;
You can search other example posted by me:
eg.
- Re: Backup with RMAN
- Re: How do i set up this backup strategy?
To be sure that you backed up your control file you can issue the rman-command:
RMAN> list backup of controlfile summary;
Bye, Aron

Can u we take online redo log backups using RMAN......can any one guide me

can u we take online redo log backups using RMAN.....in 1og

'Backup' solution for online redo logs is multiplexing (members of a group on different independent drives).
Werner

Can I Scheduled Backups Using RMAN ?

Hi,
Can I schedule Backups using RMAN without depending on Any O/S utilities....
If ,Yes......Let Me Know How it sis possible.....
Thanks In Advance.....
Prasannakumar.

Yes, easiest way is Enterprise Manager. Otherwise you have to define your own DBMS_SCHEDULER tasks.
Werner

HT201210 trying to backup ipad to windows 8 computer. i get an error message stating it is unable to backup. i also see this when try to backup to icloud. Everything works fine with Windows XP. Any suggestions?

Trying to backup iPad on New Windows 8 machine. I get an iTunes error message "unable to backup" This happens when I try to backup to my computer or iCloud. I don't have this issue with my XP machines. Any suggestions?

Go back to disk manager, assign a drive letter, after the mount. The vhdx will show in disk manager, right click on the vhdx, to add a drive letter

Deleting standby old redologs when make a backup with rman

Hello friends,
I like to know how to use the commando delete noprompt obsolete with the standby database using rman, if I use rman says cant use that command with a standby db using dataguard, I switchover to a primary and then lauch the command but always is the same message on RMAN.
How I can use rman to make a backup and then delete old´s log?, I have no problem with the primary DB, the hard disk is filling with old logs on the standby side and i dont know how to delete in the better place like rman does with the primary with the command delete noprompt obsolete.
Thanks.

Hi!
In the primary database You must continue with Your backup routine, using rman ( backuping archives and then deleting it)
On the standby database You may use this script to delete applied archived redo logs.
#!/bin/ksh
export ORACLE_SID=<SID OF STBY DATABASE>
role=`
echo "set echo off";
echo "set feedback off ";
echo "set pages 0";
echo "set head off";
echo 'select DATABASE_ROLE from v$database;'
echo "exit";
} | sqlplus -s '/ as sysdba'
`
if [ "$role" = 'PHYSICAL STANDBY' ]; then
echo "set echo off";
echo "set feedback off ";
echo "set pages 0";
echo "set head off";
echo "select thread#,sequence# ";
echo 'from v$archived_log';
echo "where standby_dest = 'NO' and deleted = 'NO' and APPLIED = 'YES';";
echo "exit";
} | sqlplus -s '/ as sysdba' | while read line
do
thread=`echo "$line"|awk '{print $1}'`
sequence=`echo "$line"|awk '{print $2}'`
echo "crosscheck archivelog sequence $sequence thread $thread;"
echo "delete noprompt archivelog sequence $sequence thread $thread;"
done | rman target /
else
echo "database not a physcial standby"
fi
Regards,
Cerreia
Edited by: ecerreia on Sep 22, 2009 2:18 PM

Validate backup using RMAN

Hi,
This is a 9i RAC environment. RMAN is used to take the backup. The database is running fine and backup is taken using cron 3 times a week. There is no error messages generated when the backup is taken.
However, in the alert log file I noticed that there are corrupted blocks in the backup files. I tried to validate the backup using (restore database validate) but I ended up with erros. Then, I tried (validate backupset) to check the corruption and I am getting different errors. 2 of the backupsets says that the data file can not be verfied. 1 of the backupset throws ORA-06510: PL/SQL: unhandled user-defined exception
Can anyone guide me with this problem?
Thank you in advance

Sorry,
but there is one big problem: you don't backup your archivelogs!
Apart from a series of redundant commands (about the only required command is 'backup database', the rest needs to be relegated to house keeping scripts), this script doesn't result in a valid backup at all!
What I do is
ORAENV_ASK="NO"
export ORACLE_SID=${DB}
. $ORAENV
case ${TRACE:-""} in
T) set -x ;;
esac
dg="`date +%a`"
case "$dg" in
Mon) LVL=0
Tue|Wed|Thu|Sat|Sun) LVL=2
Fri) LVL=1
*) LVL=2
esac
echo $LVL
exec 1>>$LOGFILE 2>&1 # redirect alle output naar de logfile
# fase 1, maak een backup van de database. Bail out als dit fout gaat
rman <<EOD
connect target ${UID}
set echo on;
run
backup incremental level ${LVL}
tag="db${TIMESTAMP}" database filesperset=1
format '${BACKUP_DIR}/${ORACLE_SID}/backup_%d_db_%T_%s_%p.bck'
plus archivelog tag="arch${TIMESTAMP}"
skip inaccessible
format '${BACKUP_DIR}/${ORACLE_SID}/backup_%d_arch_%T_%s_%p.bck'
restore database validate;
And in my case I ran
configure controlfile autobackup on, and I set the format appropiately.
The main advantage ot this code is you can always use
list backupset tag="db<yyyymmdd>"
and you don't need to think about the tag.
resync catalog is implicit with autobackup on;
Autobackup is required anyway, as the autobackup saves you from loosing the catalog.
backup database validate only ensures the database can be backed up (ie the corruption is not in the datafiles). It looks like in your case the corruption is in the backup.
Obviously, due to legal regulations, I can not post the complete script.
It is also a bit smarter than I have shown here. When this phase fails, it automatically deletes the backup, using the tag mechanism.
Sybrand Bakker
Senior Oracle DBA

Script for cold backup using RMAN

Dear all,
db_version:-10.2.0.4
os_version:- Windows 2003 server
I wish to schedule a script that will take cold backup of my database using RMAN.
Any help is appreciated ..
Edited by: user12000301 on May 18, 2011 5:02 AM

Dear All,
Thanks a lot for your valuable time :
However i have managed to do it as follows :
1. First i have configure the parameter of RMAN ( Since it is my UAT in Noarchive log mode), I have never tried RMAN cold backup on the same.
Following is the out put of SHOW ALL;
RMAN> show all;
using target database control file instead of recovery catalog
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 2 DAYS;
CONFIGURE BACKUP OPTIMIZATION OFF;
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO 'D:\DB\RMAN_BKP\BACKUPS%F';
CONFIGURE DEVICE TYPE DISK PARALLELISM 2 BACKUP TYPE TO COMPRESSED BACKUPSET;
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1;
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1;
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT 'D:\DB\RMAN_BKP\BACKUPS\DB_%U.%r';
CONFIGURE MAXSETSIZE TO UNLIMITED;
CONFIGURE ENCRYPTION FOR DATABASE OFF;
CONFIGURE ENCRYPTION ALGORITHM 'AES128';
CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON STANDBY;
CONFIGURE SNAPSHOT CONTROLFILE NAME TO 'D:\DB\RMAN_BKP\BACKUPS\SNCFDB.ORA';
2. I have created a rman_cold_bkp.bat file which has following entry :
cd c:\oracle10g\bin
set oracle_sid=DB
rman target system/*** @D:\DB\RMAN_BKP\SCRIPT\rman_cold_bkp.rcv log=D:\DB\RMAN_BKP\SCRIPT\rman_cold_bkp.log
exit
3. Whereas rman_cold_bkp.rcv file contains following contents:
run
allocate channel C1 device type disk;
shutdown immediate;
startup mount;
backup database;
alter database open;
release channel C1;
exit
I did checked it and it;s working fine for me :-)
Regards,
Girish

Doubt in taking backup using RMAN CATALOG

Hi,
when i was using RMAN CATALOG.
can i create separate database for catalog on server machin/backup server?
if create separate database for catalog?
how to create a separate database for catalog and plz give clear instruction one by one.
thanks

can i create separate database for catalog on server machin/backup server?
Yes.
and
also you create separate user to "recovery catalog" and "separate tablespace" for recovery catalog.
1.creation of recovery database catalog some like normal database catalog.
but after creation of database you create one user for recovery catalog.
Note :
"User that owns the recovery catalog schema. This is a user defined in the recovery catalog database that has been granted the RECOVERY_CATALOG_OWNER role."
http://download-west.oracle.com/docs/cd/B19306_01/backup.102/b14191/rcmcnctg002.htm

Restore hot backup using RMAN?

Hi,
We are taking hotbackup using rman level0,leve1,level2. Now i want to restore level 0 first then level 1 and level 2.. how to restore like this
Thanks in advance

You don't have to explicitly restore each L0, L1 etc backup.
When you specify a SET UNTIL, RMAN identifies the backups (starting with the latest L0 before the SET UNTIL) that are to be restored and attempts to restore them.
If the backups were to disk and are no longer on disk (i.e. you have moved them to tape), you have to ensure that the backups are made available (by copying them back from tape to disk).
You can use RESTORE DATABASE VALIDATE and RESTORE ARCHIVELOG VALIDATE to identify the backups that are required.
See http://hemantoracledba.blogspot.com/2010/03/misinterpreting-restore-database.html
Hemant K Chitale

Offline backups using RMAN

Hi,
This is probably a dumb question, but I'm just starting off with RMAN (and RAC). Let me start with a bit of background to put things in context.
I have a 2 node cluster (11g)
We use bacula as our enterprise backup tool. A bacula agent runs on each machine to be backed up and copies files to be backed up to our backup server. From there, bacula writes the files to tape.
On our standalone database servers, the bacula agent runs a pre-backup job that executes a user-managed backup to write all the database files to an 'ok-to-backup' directory. The bacula agent then copies those files to the backup server.
The cluster is using ASM storage for datafiles (obviously), redo log files and archived redo logs.
With the move to RAC, a user-managed backup makes things a lot harder so I figured that using RMAN would both simplify the RAC backups and eventually give us the motivation to replace the user-managed backup scripts with RMAN on our standalone (non-clustered) database servers.
I expected RMAN to be 'cluster-aware', but when I issued the RMAN 'shutdown' command, it only shut down the instance on the local node. I assume 'startup' will only start the instance on the local node.
How do I configure RMAN to shutdown/startup all nodes of the cluster?
Thanks,
Steve
Edited by: steve_baldwin on Jan 26, 2009 12:22 AM

Thanks for the reply. I am familiar with srvctl however I thought rman would be a bit more 'cluster aware'.
So, I presume you are saying that I should issue the srvctl command to shut down and then mount the database before I start rman and then use it again to bounce the database after rman is complete.
Thanks again,
Steve

ORA-19502 & ORA-19502 when try to backup using rman

Similar Messages

Maybe you are looking for