ORA-19571: archived-log recid 118360 stamp not found in control file - help

Hi
Every backup I do I am getting an error like below at the bottom :, every backup I do, it's complaaining about DIFFERENT archive log.
ORA-19571: archived-log recid 118360 stamp 705446770 not found in control file.
I have set keep control file info to 14 days, my retention is 7 days in RMAN, so I don't know why it's complaining, below is the full log.
It seeems to be having problems with archive logs that have just been generated while it's doing the backup I think??
channel d3: specifying archive log(s) in backup set
input archive log thread=1 sequence=705 recid=124248 stamp=707103829
input archive log thread=1 sequence=706 recid=124249 stamp=707103830
input archive log thread=1 sequence=707 recid=124250 stamp=707103831
input archive log thread=1 sequence=708 recid=124251 stamp=707103831
input archive log thread=1 sequence=709 recid=124252 stamp=707103832
input archive log thread=1 sequence=710 recid=124253 stamp=707103832
input archive log thread=1 sequence=711 recid=124254 stamp=707103833
input archive log thread=1 sequence=712 recid=124255 stamp=707103833
input archive log thread=1 sequence=713 recid=124256 stamp=707103834
input archive log thread=1 sequence=714 recid=124257 stamp=707103835
input archive log thread=1 sequence=715 recid=124258 stamp=707103835
input archive log thread=1 sequence=716 recid=124259 stamp=707103836
input archive log thread=1 sequence=717 recid=124260 stamp=707103836
input archive log thread=1 sequence=718 recid=124261 stamp=707103837
input archive log thread=1 sequence=719 recid=124262 stamp=707103837
input archive log thread=1 sequence=720 recid=124263 stamp=707103838
input archive log thread=1 sequence=721 recid=124264 stamp=707103838
input archive log thread=1 sequence=722 recid=124265 stamp=707103839
input archive log thread=1 sequence=723 recid=124266 stamp=707103840
input archive log thread=1 sequence=724 recid=124267 stamp=707103840
input archive log thread=1 sequence=725 recid=124268 stamp=707103841
input archive log thread=1 sequence=726 recid=124269 stamp=707103841
RMAN-03009: failure of backup command on d3 channel at 01/01/2010 02:11:33
ORA-19571: archived-log recid 118360 stamp 705446770 not found in control file
continuing other job steps, job failed will not be re-run
channel d6: starting compressed archive log backupset
channel d6: specifying archive log(s) in backup set
input archive log thread=1 sequence=641 recid=124034 stamp=707077994
input archive log thread=1 sequence=642 recid=124035 stamp=707077994
...

It's a rac, so shall I restart one instance at a time?? Or the whole thing? I am using an recovery catalog, so should I be connected to the recovery catalog Or control file to do a cross check backup, also when it's doing the backup do u recon it can't fing archivelog in controlfile file as it's not done a resync, should I force it to do a resync after a backup then backup the archive logs??? I really don't want to bounce the db as it's 24/7

Similar Messages

  • ORA-00339: archived log does not contain any redo

    Hi All,
    recently we faced 'ORA-00339: archived log does not contain any redo' issue at standby side,
    after searching on Google and from Metalink (note 30866.1 and 7197445.8 ) I find out that this is the known issue for 10g and below versions, our's is 11.2.0.3,
    Error in Alert Log :
    Errors in file /oracle/ora_home/diag/diag/rdbms/dwprd/DWPRD/trace/DWPRD_pr0a_48412.trc:
    ORA-00339: archived log does not contain any redo
    ORA-00334: archived log: '/redolog2/redo/redolog3a.log'
    Errors in file /oracle/ora_home/diag/diag/rdbms/dwprd/DWPRD/trace/DWPRD_pr0a_48412.trc (incident=190009):
    ORA-00600: internal error code, arguments: [kdBlkCheckError], [1], [56702], [6114], [], [], [], [], [], [], [], []
    Incident details in: /oracle/ora_home/diag/diag/rdbms/dwprd/DWPRD/incident/incdir_190009/DWPRD_pr0a_48412_i190009.trc
    Use ADRCI or Support Workbench to package the incident.
    See Note 411.1 at My Oracle Support for error and packaging details.
    Slave exiting with ORA-10562 exception
    Errors in file /oracle/ora_home/diag/diag/rdbms/dwprd/DWPRD/trace/DWPRD_pr0a_48412.trc:
    ORA-10562: Error occurred while applying redo to data block (file# 1, block# 56702)
    ORA-10564: tablespace SYSTEM
    ORA-01110: data file 1: '/oradata1/database/DATAFILES/system01.dbf'
    ORA-10561: block type 'TRANSACTION MANAGED DATA BLOCK', data object# 2
    ORA-00600: internal error code, arguments: [kdBlkCheckError], [1], [56702], [6114], [], [], [], [], [], [], [], []
    Mon Apr 15 11:34:12 2013
    Dumping diagnostic data in directory=[cdmp_20130415113412], requested by (instance=1, osid=48412 (PR0A)), summary=[incident=190009].
    Thanks

    Hi,
    "The archived log is not the correct log.
    It is a copy of a log file that has never been used for redo generation, or was an online log being prepared to be the current log."
    "Restore the correct log file."
    Can you say, what is last changes on your database, On log files?
    Did you copies your '/redolog2/redo/redolog3a.log' log file from other ?
    Regards
    Mahir M. Quluzade

  • ORA-00332 - archived log is too small - may be incompletely archived

    Hi, i have a problem with a physical standby database, the apply process is stoped, the databas is version 9.2.0.7.0 on Solaris 10. I received the the next errors into the alert logfile, What can i do??
    Thanks for your help.
    Regards.
    Media Recovery Waiting for thread 1 seq# 16958 (in transit)
    Media Recovery Log /dbf/dbnte01/oralogs/archivelogs/dbnte01_1_16958.dbf
    Media Recovery Waiting for thread 1 seq# 16959 (in transit)
    Media Recovery Log /dbf/dbnte01/oralogs/archivelogs/dbnte01_1_16959.dbf
    Media Recovery Waiting for thread 1 seq# 16960 (in transit)
    Media Recovery Log /dbf/dbnte01/oralogs/archivelogs/dbnte01_1_16960.dbf
    Fri Aug 24 06:57:37 2007
    Media Recovery Waiting for thread 1 seq# 16961 (in transit)
    Fri Aug 24 16:51:51 2007
    RFS: Possible network disconnect with primary database
    Closing latent archivelog for thread 1 sequence 16961
    EOF located at block 102401 low SCN 1510:-1868154783 next SCN 1510:-1868154783
    Latent archivelog '/dbf/dbnte01/oralogs/archivelogs/dbnte01_1_16961.dbf'
    If you wish to failover to this standby database, you should use the
    following command to manually register the archivelog for recovery:
    ALTER DATABASE REGISTER LOGFILE '/dbf/dbnte01/oralogs/archivelogs/dbnte01_1_16961.dbf';
    Fri Aug 24 16:51:51 2007
    Errors in file /sfw/oracle/admin/dbnte01/udump/stnte01_rfs_15414.trc:
    ORA-00367: checksum error in log file header
    ORA-00332: archived log is too small - may be incompletely archived
    ORA-00334: archived log: '/dbf/dbnte01/oralogs/archivelogs/dbnte01_1_16961.dbf'
    ORA-12161: TNS:internal error: partial data received
    Fri Aug 24 18:58:05 2007
    Fetching gap sequence for thread 1, gap sequence 16961-16961
    Trying FAL server: (DESCRIPTION=(ADDRESS_LIST = (ADDRESS=(PROTOCOL=tcp)(HOST=sunvk05)(PORT=1521)))(CONNECT_DATA=(SID=dbnte01)(SERVER
    =DEDICATED)))
    Fri Aug 24 19:03:40 2007
    Failed to request gap sequence. Thread #: 1, gap sequence: 16961-16961
    All FAL server has been attempted.
    Fri Aug 24 21:07:24 2007
    Shutting down instance: further logons disabled
    Fri Aug 24 21:07:30 2007
    MRP0: Background Media Recovery user canceled with status 16037
    Recovery interrupted.

    Somehow your archivelog file got corrupted and it was not possible to apply it to the stand by database, check if the requested sequence still exists on the active database and apply it manually.
    ~ Madrid

  • ORA-01034: Message 1034 not found; No message file for product=RDBMS

    Hi!
    After creating a RAC Database (10.2.0.5) on Redhat Enterprise Linux 64-bit, we checked: Listeners, Processes and Environment variables.
    Everything was set up properly and running.
    When trying to connect as sysdba the following message appeared:
    $sqlplus / as sysdba
    sql>select * from v$instance;
    select * from v$instance
    ERROR at line 1:
    ORA-01034: Message 1034 not found; No message file for product=RDBMS,
    facility=ORA
    A shutdown and startup did not help.
    What could be the issue here?
    Thanks!

    Here is an excerpt of the alert log. No ora-
    ALTER DATABASE OPEN
    Picked broadcast on commit scheme to generate SCNs
    Fri Feb 24 11:26:50 CET 2012
    LGWR: STARTING ARCH PROCESSES
    ARC0 started with pid=32, OS id=4930
    Fri Feb 24 11:26:50 CET 2012
    ARC0: Archival started
    ARC1: Archival started
    LGWR: STARTING ARCH PROCESSES COMPLETE
    ARC1 started with pid=33, OS id=4932
    Fri Feb 24 11:26:50 CET 2012
    SUCCESS: diskgroup LOG01 was mounted
    SUCCESS: diskgroup LOG02 was mounted
    Thread 1 opened at log sequence 10
      Current log# 11 seq# 10 mem# 0: +LOG01/omdemo/onlinelog/group_11.265.776085353
      Current log# 11 seq# 10 mem# 1: +LOG02/omdemo/onlinelog/group_11.265.776085353
    Successful open of redo thread 1
    Fri Feb 24 11:26:50 CET 2012
    ARC0: Becoming the 'no FAL' ARCH
    ARC0: Becoming the 'no SRL' ARCH
    Fri Feb 24 11:26:50 CET 2012
    ARC1: Becoming the heartbeat ARCH
    Fri Feb 24 11:26:50 CET 2012
    SMON: enabling cache recovery
    Fri Feb 24 11:26:50 CET 2012
    Successfully onlined Undo Tablespace 1.
    Fri Feb 24 11:26:50 CET 2012
    SMON: enabling tx recovery
    Fri Feb 24 11:26:50 CET 2012
    Database Characterset is WE8MSWIN1252
    replication_dependency_tracking turned off (no async multimaster replication found)
    Starting background process QMNC
    QMNC started with pid=34, OS id=4934
    Fri Feb 24 11:26:52 CET 2012
    Completed: ALTER DATABASE OPEN
    Sat Feb 25 02:00:23 CET 2012
    Thread 1 advanced to log sequence 11 (LGWR switch)
      Current log# 12 seq# 11 mem# 0: +LOG01/omdemo/onlinelog/group_12.266.776085355
      Current log# 12 seq# 11 mem# 1: +LOG02/omdemo/onlinelog/group_12.266.776085355$ps -ef|grep mon
    oracle    4694     1  0 Feb24 ?        00:00:10 /oracle/app/oracle/product/10.2.0/db_1/bin/racgimon startd OMDEMO
    oracle    4773     1  0 Feb24 ?        00:00:04 ora_pmon_OMDEMO1
    oracle    4779     1  0 Feb24 ?        00:00:03 ora_lmon_OMDEMO1
    oracle    4819     1  0 Feb24 ?        00:00:05 ora_smon_OMDEMO1
    oracle    4825     1  0 Feb24 ?        00:00:00 ora_mmon_OMDEMO1
    root     10429     1  0 Jan24 ?        03:29:11 /oracle/app/grid/11.2.0/grid/bin/osysmond.bin
    root     10475     1  0 Jan24 ?        00:01:44 /oracle/app/grid/11.2.0/grid/bin/cssdmonitor
    grid     11214     1  0 Jan24 ?        00:00:46 asm_pmon_+ASM1
    grid     11301     1  0 Jan24 ?        00:00:19 asm_lmon_+ASM1
    grid     11335     1  0 Jan24 ?        00:00:00 asm_smon_+ASM1
    grid     11343     1  0 Jan24 ?        00:00:00 asm_gmon_+ASM1
    grid     11347     1  0 Jan24 ?        00:00:00 asm_mmon_+ASM1
    dbus     11972     1  0 Jan17 ?        00:00:03 dbus-daemon --system
    xfs      14493     1  0 Jan17 ?        00:00:00 xfs -droppriv -daemon
    avahi    14594     1  0 Jan17 ?        00:00:00 avahi-daemon: running [at1srv0080.local]
    avahi    14595 14594  0 Jan17 ?        00:00:00 avahi-daemon: chroot helper
    root     14671     1  0 Jan17 ?        00:00:00 /usr/sbin/gdm-binary -nodaemon
    root     14736 14671  0 Jan17 ?        00:00:00 /usr/sbin/gdm-binary -nodaemon
    oracle   17059 12052  0 10:42 pts/1    00:00:00 grep mon
    [oracle@at1srv0080 /]$ sqlplus / as sysdba
    SQL*Plus: Release 10.2.0.5.0 - Production on Mon Feb 27 10:46:51 2012
    Copyright (c) 1982, 2010, Oracle.  All Rights Reserved.
    Connected to an idle instance.
    SQL> startup
    ORA-01078: failure in processing system parameters
    LRM-00109: could not open parameter file '/oracle/app/oracle/product/10.2.0/db_1/dbs/initOCTA1.ora'

  • Datasource: ORA-02019: connection description for remote database not found

    Hi,
    I recently made the datasource to point to a new host, and using the EM console tested the connectivity to the datasource to be successful.
    Java code that refers to the DS is also the same as before that was working as only the connection string has been changed, but now trying to access the web-application shows the following error in the logs:
    ==============
    Exception::java.sql.SQLException: ORA-02019: connection description for remote database not found
    oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:138)
    oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:316)
    oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:282)
    oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:639)
    oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:113)
    oracle.jdbc.driver.T4CStatement.execute_for_describe(T4CStatement.java:431)
    oracle.jdbc.driver.OracleStatement.execute_maybe_describe(OracleStatement.java:1029)
    oracle.jdbc.driver.T4CStatement.execute_maybe_describe(T4CStatement.java:463)
    oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1126)
    oracle.jdbc.driver.OracleStatement.executeQuery(OracleStatement.java:1274)
    oracle_jdbc_driver_T4CStatement_Proxy.executeQuery()=====================================
    What could be the reason? Is there any other app server datasource related setting that needs to be done or is it some other issue - as I said 'testing the connection from EM console connects successfully'.
    Thanks,
    Rommel.

    The issue is resolved now.
    One of the queries used a db link that was missing on the new database and therefore the error from the java code.
    Since testing for connectivity using DS through EM console does not check for any db link (using the default query it executes) connectivity was successful.
    Thank a lot,
    Rommel.

  • ORA-01665 : control file is not a standby control file

    I've already tested Dataguard configuration on Oracle 10g Enterprise edition for Windows.
    While configuring the same in Sun Solaris, I'm receiving this error:
    ORA-01665: control file is not a standby control file
    Steps I follow are as below:
    1) Creating a password file on both databases (primary and standby)
    2) Force logging primary db and shut it down. Take a cold backup of redo log files and datafiles.
    3) Transferring them to Standby db.
    4) Starting primary db in mount mode and creating a standby controlfile. Transferring standby controlfile to proper location defined in standby init file.
    5) Start primary db in read-write mode and secondary db in mount mode using:
    alter database mount standby database;
    I receive this error while firing this SQL.
    Can anyone please help me out solving the same.

    I'm already done with the same. Find log below:
    bash-3.00$ sqlplus sys/sys123@orcl as sysdba
    SQL*Plus: Release 10.2.0.1.0 - Production on Thu Feb 19 11:54:29 2009
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    Connected to:
    Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit Production
    With the Partitioning, OLAP and Data Mining options
    SQL>
    SQL>
    SQL> alter database create standby controlfile as '/export/home/oracle/abc/control4.ctl';
    Database altered.
    SQL> alter database create standby controlfile as '/export/home/oracle/abc/control5.ctl';
    Database altered.
    SQL>

  • ORA-0209:Connection discription for remote database not found

    Please help me with this oracle error.
    I have create a DB link to connect to the Oracle database from a remote Oracle DB. I am able to query the select statement through DBLINK and i also created the Synonym for the same. But still iget the below error in the DB package when i am inserting one row into the same table for which i created a synonym with the DBLINK
    ORA-0209:Connection discription for remote database not found
    ORA-02063:preceding line from DBLINK
    Please help me if anyone can give me a appropriate answer.
    Thanks in advance for all those who try to help me

    Sorry for the Typo mistake ..
    The ORA error code is not ORA-0209 but it is ORA-02019

  • ORA-02298: cannot enable name - parent keys not found

    Hi All,
    I got this problem while creating Foreign Key constraints ORA-02298: cannot enable name - parent keys not found. How to rectify this problem

    alter table WORK_APPROVAL_DETAILS
    add constraint FK_WRKAPPR_AUTH_APPR foreign key (APPROVER_CODE, PCC_INFO_CODE)
    references AUTHORIZED_APPROVERS (APPROVER_CODE, PCC_INFO_CODE);
    WORK_APPROVAL_DETAILS:
    inspection_id     number(16)               
    work_code      varchar2(18)               
    approver_code     varchar2(12)               
    approver_remarks     varchar2(200)               
    approval_date     date               
    role_code     char(2)               
    reference_no     varchar2(50)               
    pcc_info_code     varchar2(9)               
    status_code     number(4)
    AUTHORIZED_APPROVERS
    approver_code     varchar2(12)               
    approver_name     varchar2(30)               
    dept_code     varchar2(3)               
    desg_code      char(2)               
    is_active     char(1)               
    address     varchar2(250)               
    role_code     char(2)               
    created_by     varchar2(20)               
    created_date     date               
    pcc_info_code     varchar2(9)               
    qualification     varchar2(50)               
    experience      varchar2(25)

  • ORA-02298: cannot validate (PL_REM_FK_ES_EMP) - parent keys not found

    hi
    I disabled some constraints. But now, when I try to enable them then I get the error:
    ORA-02298: cannot validate (PL_REM_FK_ES_EMP) - parent keys not found.
    Plz guide me to resolve this problem.

    Hi,
    there is most likely some orphaned records in the child table. what command did you use to delete the record? what the output of
    select xxxxx from child_table a where not exists (select 'x' from
    parent_table where primary_key = a.key_values);
    dan

  • I have just updated my MBP to Maverick OS. I am unable to shutdown or log off. When i press the shutdown button, a black screen appears which goes off on pressing any key. The shutdown or log off dialog does not appear. Your kind help is much appreciated.

    I have just updated my MBP 17 / retina display to Maverick OS. I am unable to shutdown or log off. When i press the shutdown button, a black screen appears which goes off on pressing any key. The shutdown or log off dialog does not appear. Your kind help is much appreciated.

    The button response has changed. 
    Short press : sleep
    Medium press (2-3 sec) : restart, shutdown, sleep dialog
    Long press : force shutdown. (Same as before)

  • ERROR: exception symbol "09732" not found in resource file

    I am trying to get a client to work with workflow services. I get 'ERROR: exception symbol "09732" not found in resource file' in the output when the method queryTasks is excecuted.
    Jdeveloper 10.1.3.4 and SOA Suite 10.1.3.3.0
    Any ideas?
    Eydun
    ------------------ program ---------------------
    package project1;
    //import com.oracle.services.bpel.task.Task;
    import java.util.ArrayList;
    import oracle.bpel.services.workflow.client.IWorkflowServiceClient;
    import oracle.bpel.services.workflow.client.WorkflowServiceClientFactory;
    import oracle.bpel.services.workflow.query.ITaskQueryService;
    import oracle.bpel.services.workflow.verification.IWorkflowContext;
    import java.util.List;
    import oracle.bpel.services.workflow.repos.Ordering;
    import oracle.bpel.services.workflow.repos.Predicate;
    import oracle.bpel.services.workflow.repos.TableConstants;
    import oracle.bpel.services.workflow.task.ITaskService;
    import oracle.bpel.services.workflow.task.model.Task;
    public class Class1 {
    public Class1() {
    public void TryTask() {
    try {
    //Create JAVA WorflowServiceClient
    IWorkflowServiceClient wfSvcClient =
    WorkflowServiceClientFactory.getWorkflowServiceClient(WorkflowServiceClientFactory.WSIF_CLIENT);
    //Get the task query service
    ITaskQueryService querySvc = wfSvcClient.getTaskQueryService();
    //Login as jstein
    IWorkflowContext ctx = querySvc.authenticate("jstein",
    "welcome1",
    null, //Use default realm
    null);//Not logging in on behalf of another user
    //Set up list of columns to query
    List queryColumns = new ArrayList();
    queryColumns.add("TASKID");
    queryColumns.add("TASKNUMBER");
    queryColumns.add("TITLE");
    queryColumns.add("OUTCOME");
    //Create a predicate to query tasks that have a null outcome
    String outcome = null;
    Predicate predicate = new Predicate(TableConstants.WFTASK_OUTCOME_COLUMN,
    Predicate.OP_EQ,
    outcome);
    //Create an ordering to order tasks by task number
    Ordering ordering = new Ordering(TableConstants.WFTASK_TASKNUMBER_COLUMN
    ,true //Ascending order
    ,false //Nulls last
    //Query a list of tasks assigned to jstein
    List tasks = querySvc.queryTasks(ctx,
    queryColumns,
    null, //Do not query additional info
    ITaskQueryService.ASSIGNMENT_FILTER_MY,
    null, //No keywords
    null, //predicate, //Only tasks with no outome set
    ordering, //Order by ascending task number
    0, //Do not page the query result
    0);
    //Get the task service
    ITaskService taskSvc = wfSvcClient.getTaskService();
    //Loop over the tasks, outputting task information, and approving tasks
    for(int i = 0 ; i < tasks.size() ; i ++)
    Task task = (Task)tasks.get(i);
    int taskNumber = task.getSystemAttributes().getTaskNumber();
    String title = task.getTitle();
    String taskId = task.getSystemAttributes().getTaskId();
    //Set the outcome
    taskSvc.updateTaskOutcome(ctx,taskId,"APPROVED");
    System.out.println("Task #"+taskNumber+" ("+title+") is APPROVED");
    catch (Exception e)
    //Handle any exceptions raised here...
    System.out.println("Caught workflow exception: "+e.getMessage());
    public static void main(String[] args) {
    Class1 class1 = new Class1();
    class1.TryTask();
    ------------------- output ---------------------
    C:\java\jdk1.6.0_07\bin\javaw.exe -client -classpath C:\jdev11work\eej\mywork\Application3\Project1\classes;C:\oracle\jdev10134bpellibs\bpel\lib\bpm-infra.jar;C:\oracle\jdev10134bpellibs\bpel\lib\orabpel-common.jar;C:\oracle\jdev10134bpellibs\bpel\lib\orabpel-thirdparty.jar;C:\oracle\jdev10134bpellibs\j2ee\home\jazncore.jar;C:\oracle\jdev10134bpellibs\j2ee\home\oc4jclient.jar;C:\oracle\jdev10134bpellibs\lib\xml.jar;C:\oracle\jdev10134bpellibs\lib\xmlparserv2.jar;C:\oracle\jdev10134bpellibs\bpel\system\services\config;C:\oracle\jdev10134bpellibs\webservices\lib\orasaaj.jar;C:\oracle\jdev10134bpellibs\webservices\lib\soap.jar;C:\oracle\jdev10134bpellibs\bpel\system\services\lib\bpm-services.jar;C:\oracle\jdev10134bpellibs\bpel\system\services\schema;C:\oracle\jdev10134bpellibs\bpel\lib\olite40.jar;C:\oracle\jdev10134bpellibs\jdbc\lib\ojdbc14.jar;C:\oracle\jdev10134bpellibs\bpel\lib\orabpel.jar;C:\oracle\jdev10134bpellibs\wsclient_extended.jar project1.Class1
    <::> WorkflowService:: TaskQueryService.authenticate(): called. user = jstein identityContext = null onBehalfOfUser = null
    <::> WorkflowService:: VerificationService.authenticateUser: attempting for user = jstein identityContext = null
    <ISConfiguration::load> Found Configuration=Configuration: realmName=jazn.com properties:{} has 1 providers:
    <ISConfiguration::load>      Provider: service=Identity providerType=JAZN providerName=XML Provider properties:{usersPropertiesFile=users-properties.xml}
    <ISConfiguration::load>      
    <ISConfiguration::validate> Validate configuration=Configuration: realmName=jazn.com properties:{} has 1 providers:
    <ISConfiguration::validate>      Provider: service=Identity providerType=JAZN providerName=XML Provider properties:{usersPropertiesFile=users-properties.xml}
    <ISConfiguration::validate>      
    <ISConfiguration::save> Save IdentityService configuration file into /C:/oracle/jdev10134bpellibs/bpel/system/services/config/is_config.xml
    <ServiceFactory::getService> Provider type is JAZN
    <ServiceFactory::getService> JAZN's ProviderType=XML
    <XMLIdentityService::init> Load provider initialization begin
    <AbstractXMLProvider::loadUsers> XMLProvider::load() Load users from source:users-properties.xml
    <AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users begins
    <BPMUserImpl::<init>> Constacted user=cdickens
    <XMLProvider::addUserToCache> User cdickens is loaded ....
    <BPMUserImpl::<init>> Constacted user=wfaulk
    <XMLAuthenticationService::init> Load provider initialization complete
    <XMLAuthorizationService::init> Load provider initialization begin
    <AbstractXMLProvider::loadUsers> XMLProvider::load() Load users from source:users-properties.xml
    <AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users begins
    <BPMUserImpl::<init>> Constacted user=cdickens
    <XMLProvider::addUserToCache> User cdickens is loaded ....
    <BPMUserImpl::<init>> Constacted user=wfaulk
    <XMLProvider::addUserToCache> User wfaulk is loaded ....
    <BPMUserImpl::<init>> Constacted user=sfitzger
    <XMLProvider::addUserToCache> User sfitzger is loaded ....
    <BPMUserImpl::<init>> Constacted user=jstein
    <XMLProvider::addUserToCache> User jstein is loaded ....
    <BPMUserImpl::<init>> Constacted user=istone
    <XMLProvider::addUserToCache> User istone is loaded ....
    <BPMUserImpl::<init>> Constacted user=jcooper
    <XMLProvider::addUserToCache> User jcooper is loaded ....
    <BPMUserImpl::<init>> Constacted user=mtwain
    <XMLProvider::addUserToCache> User mtwain is loaded ....
    <BPMUserImpl::<init>> Constacted user=jlondon
    <XMLProvider::addUserToCache> User jlondon is loaded ....
    <BPMUserImpl::<init>> Constacted user=ltolstoy
    <XMLProvider::addUserToCache> User ltolstoy is loaded ....
    <BPMUserImpl::<init>> Constacted user=fkafka
    <XMLProvider::addUserToCache> User fkafka is loaded ....
    <BPMUserImpl::<init>> Constacted user=szweig
    <XMLProvider::addUserToCache> User szweig is loaded ....
    <BPMUserImpl::<init>> Constacted user=mmitch
    <XMLProvider::addUserToCache> User mmitch is loaded ....
    <BPMUserImpl::<init>> Constacted user=jausten
    <XMLProvider::addUserToCache> User jausten is loaded ....
    <BPMUserImpl::<init>> Constacted user=achrist
    <XMLProvider::addUserToCache> User achrist is loaded ....
    <BPMUserImpl::<init>> Constacted user=rsteven
    <XMLProvider::addUserToCache> User rsteven is loaded ....
    <BPMUserImpl::<init>> Constacted user=cdoyle
    <XMLProvider::addUserToCache> User cdoyle is loaded ....
    <BPMUserImpl::<init>> Constacted user=wshake
    <XMLProvider::addUserToCache> User wshake is loaded ....
    <BPMUserImpl::<init>> Constacted user=guest
    <XMLProvider::addUserToCache> User guest is loaded ....
    <BPMUserImpl::<init>> Constacted user=bpeladmin
    <XMLProvider::addUserToCache> User bpeladmin is loaded ....
    <BPMUserImpl::<init>> Constacted user=default
    <XMLProvider::addUserToCache> User default is loaded ....
    <AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users ends
    <AbstractXMLProvider::loadRoles> XMLProvider::load() Load roles from source:users-properties.xml
    <AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users begins
    <XMLProvider::addRoleToCache> Role BPMAnalyst is loaded .....
    <XMLProvider::addRoleToCache> Role BPMWorkflowAdmin is loaded .....
    <AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users ends
    <AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users begins
    <XMLProvider::addRoleToCache> Role LoanAgentGroup is loaded .....
    <XMLProvider::addRoleToCache> Role LoanAnalyticGroup is loaded .....
    <XMLProvider::addRoleToCache> Role LoanAnalyticGroup is loaded .....
    <XMLProvider::addRoleToCache> Role Supervisor is loaded .....
    <XMLProvider::addRoleToCache> Role California is loaded .....
    <XMLProvider::addRoleToCache> Role WesternRegion is loaded .....
    <XMLProvider::addRoleToCache> Role EasternRegion is loaded .....
    <AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users ends
    <XMLAuthorizationService::init> Load provider initialization complete
    <XMLAuthenticationService::authenticateUser> XMLAuthenticationService::authenticateUser():: begin
    <BPMServiceJAZNBase::getRealm> BPMAuthenticationServiceImpl::getRealm():: begin
    <BPMServiceJAZNBase::getRealm> Realm=[Realm: jazn.com]
    <BPMServiceJAZNBase::getRealm> BPMAuthenticationServiceImpl::getRealm():: end
    <XMLAuthenticationService::authenticateUser> XMLAuthenticationService:: call authenticate
    <XMLAuthenticationService::authenticateUser> XMLAuthenticationService:: user is authenticated!
    <XMLAuthenticationService::authenticateUser> XMLAuthenticationService::authenticateUser():: end
    <ServiceFactory::getService> Provider type is JAZN
    <ServiceFactory::getService> JAZN's ProviderType=XML
    <XMLIdentityService::init> Load provider initialization begin
    <AbstractXMLProvider::loadUsers> XMLProvider::load() Load users from source:users-properties.xml
    <AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users begins
    <BPMUserImpl::<init>> Constacted user=cdickens
    <XMLProvider::addUserToCache> User cdickens is loaded ....
    <BPMUserImpl::<init>> Constacted user=wfaulk
    <XMLProvider::addUserToCache> User wfaulk is loaded ....
    <BPMUserImpl::<init>> Constacted user=sfitzger
    <XMLProvider::addUserToCache> User sfitzger is loaded ....
    <BPMUserImpl::<init>> Constacted user=jstein
    <XMLProvider::addUserToCache> User jstein is loaded ....
    <BPMUserImpl::<init>> Constacted user=istone
    <XMLProvider::addUserToCache> User istone is loaded ....
    <BPMUserImpl::<init>> Constacted user=jcooper
    <XMLProvider::addUserToCache> User jcooper is loaded ....
    <BPMUserImpl::<init>> Constacted user=mtwain
    <XMLProvider::addUserToCache> User mtwain is loaded ....
    <BPMUserImpl::<init>> Constacted user=jlondon
    <XMLProvider::addUserToCache> User jlondon is loaded ....
    <BPMUserImpl::<init>> Constacted user=ltolstoy
    <XMLProvider::addUserToCache> User ltolstoy is loaded ....
    <BPMUserImpl::<init>> Constacted user=fkafka
    <XMLProvider::addUserToCache> User fkafka is loaded ....
    <BPMUserImpl::<init>> Constacted user=szweig
    <XMLProvider::addUserToCache> User szweig is loaded ....
    <BPMUserImpl::<init>> Constacted user=mmitch
    <XMLProvider::addUserToCache> User mmitch is loaded ....
    <BPMUserImpl::<init>> Constacted user=jausten
    <XMLProvider::addUserToCache> User jausten is loaded ....
    <BPMUserImpl::<init>> Constacted user=achrist
    <XMLProvider::addUserToCache> User achrist is loaded ....
    <BPMUserImpl::<init>> Constacted user=rsteven
    <XMLProvider::addUserToCache> User rsteven is loaded ....
    <BPMUserImpl::<init>> Constacted user=cdoyle
    <XMLProvider::addUserToCache> User cdoyle is loaded ....
    <BPMUserImpl::<init>> Constacted user=wshake
    <XMLProvider::addUserToCache> User wshake is loaded ....
    <BPMUserImpl::<init>> Constacted user=guest
    <XMLProvider::addUserToCache> User guest is loaded ....
    <BPMUserImpl::<init>> Constacted user=bpeladmin
    <XMLProvider::addUserToCache> User bpeladmin is loaded ....
    <BPMUserImpl::<init>> Constacted user=default
    <XMLProvider::addUserToCache> User default is loaded ....
    <AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users ends
    <AbstractXMLProvider::loadRoles> XMLProvider::load() Load roles from source:users-properties.xml
    <AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users begins
    <XMLProvider::addRoleToCache> Role BPMAnalyst is loaded .....
    <XMLProvider::addRoleToCache> Role BPMWorkflowAdmin is loaded .....
    <AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users ends
    <AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users begins
    <XMLProvider::addRoleToCache> Role LoanAgentGroup is loaded .....
    <XMLProvider::addRoleToCache> Role LoanAnalyticGroup is loaded .....
    <XMLProvider::addRoleToCache> Role LoanAnalyticGroup is loaded .....
    <XMLProvider::addRoleToCache> Role Supervisor is loaded .....
    <XMLProvider::addRoleToCache> Role California is loaded .....
    <XMLProvider::addRoleToCache> Role WesternRegion is loaded .....
    <XMLProvider::addRoleToCache> Role EasternRegion is loaded .....
    <AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users ends
    <XMLIdentityService::init> Load provider initialization complete
    <XMLAuthenticationService::init> Load provider initialization begin
    <AbstractXMLProvider::loadUsers> XMLProvider::load() Load users from source:users-properties.xml
    <AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users begins
    <BPMUserImpl::<init>> Constacted user=cdickens
    <XMLProvider::addUserToCache> User cdickens is loaded ....
    <BPMUserImpl::<init>> Constacted user=wfaulk
    <XMLProvider::addUserToCache> User wfaulk is loaded ....
    <BPMUserImpl::<init>> Constacted user=sfitzger
    <XMLProvider::addUserToCache> User sfitzger is loaded ....
    <BPMUserImpl::<init>> Constacted user=jstein
    <XMLProvider::addUserToCache> User jstein is loaded ....
    <BPMUserImpl::<init>> Constacted user=istone
    <XMLProvider::addUserToCache> User istone is loaded ....
    <BPMUserImpl::<init>> Constacted user=jcooper
    <XMLProvider::addUserToCache> User jcooper is loaded ....
    <BPMUserImpl::<init>> Constacted user=mtwain
    <XMLProvider::addUserToCache> User mtwain is loaded ....
    <BPMUserImpl::<init>> Constacted user=jlondon
    <XMLProvider::addUserToCache> User jlondon is loaded ....
    <BPMUserImpl::<init>> Constacted user=ltolstoy
    <XMLProvider::addUserToCache> User ltolstoy is loaded ....
    <BPMUserImpl::<init>> Constacted user=fkafka
    <XMLProvider::addUserToCache> User fkafka is loaded ....
    <BPMUserImpl::<init>> Constacted user=szweig
    <XMLProvider::addUserToCache> User szweig is loaded ....
    <BPMUserImpl::<init>> Constacted user=mmitch
    <XMLProvider::addUserToCache> User mmitch is loaded ....
    <BPMUserImpl::<init>> Constacted user=jausten
    <XMLProvider::addUserToCache> User jausten is loaded ....
    <BPMUserImpl::<init>> Constacted user=achrist
    <XMLProvider::addUserToCache> User achrist is loaded ....
    <BPMUserImpl::<init>> Constacted user=rsteven
    <XMLProvider::addUserToCache> User rsteven is loaded ....
    <BPMUserImpl::<init>> Constacted user=cdoyle
    <XMLProvider::addUserToCache> User cdoyle is loaded ....
    <BPMUserImpl::<init>> Constacted user=wshake
    <XMLProvider::addUserToCache> User wshake is loaded ....
    <BPMUserImpl::<init>> Constacted user=guest
    <XMLProvider::addUserToCache> User guest is loaded ....
    <BPMUserImpl::<init>> Constacted user=bpeladmin
    <XMLProvider::addUserToCache> User bpeladmin is loaded ....
    <BPMUserImpl::<init>> Constacted user=default
    <XMLProvider::addUserToCache> User default is loaded ....
    <AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users ends
    <AbstractXMLProvider::loadRoles> XMLProvider::load() Load roles from source:users-properties.xml
    <AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users begins
    <XMLProvider::addRoleToCache> Role BPMAnalyst is loaded .....
    <XMLProvider::addRoleToCache> Role BPMWorkflowAdmin is loaded .....
    <AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users ends
    <AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users begins
    <XMLProvider::addRoleToCache> Role LoanAgentGroup is loaded .....
    <XMLProvider::addRoleToCache> Role LoanAnalyticGroup is loaded .....
    <XMLProvider::addRoleToCache> Role LoanAnalyticGroup is loaded .....
    <XMLProvider::addRoleToCache> Role Supervisor is loaded .....
    <XMLProvider::addRoleToCache> Role California is loaded .....
    <XMLProvider::addRoleToCache> Role WesternRegion is loaded .....
    <XMLProvider::addRoleToCache> Role EasternRegion is loaded .....
    <AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users ends
    <XMLAuthenticationService::init> Load provider initialization complete
    <XMLAuthorizationService::init> Load provider initialization begin
    <AbstractXMLProvider::loadUsers> XMLProvider::load() Load users from source:users-properties.xml
    <AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users begins
    <BPMUserImpl::<init>> Constacted user=cdickens
    <XMLProvider::addUserToCache> User cdickens is loaded ....
    <BPMUserImpl::<init>> Constacted user=wfaulk
    <XMLProvider::addUserToCache> User wfaulk is loaded ....
    <BPMUserImpl::<init>> Constacted user=sfitzger
    <XMLProvider::addUserToCache> User sfitzger is loaded ....
    <BPMUserImpl::<init>> Constacted user=jstein
    <XMLProvider::addUserToCache> User jstein is loaded ....
    <BPMUserImpl::<init>> Constacted user=istone
    <XMLProvider::addUserToCache> User istone is loaded ....
    <BPMUserImpl::<init>> Constacted user=jcooper
    <XMLProvider::addUserToCache> User jcooper is loaded ....
    <BPMUserImpl::<init>> Constacted user=mtwain
    <XMLProvider::addUserToCache> User mtwain is loaded ....
    <BPMUserImpl::<init>> Constacted user=jlondon
    <XMLProvider::addUserToCache> User jlondon is loaded ....
    <BPMUserImpl::<init>> Constacted user=ltolstoy
    <XMLProvider::addUserToCache> User ltolstoy is loaded ....
    <BPMUserImpl::<init>> Constacted user=fkafka
    <XMLProvider::addUserToCache> User fkafka is loaded ....
    <BPMUserImpl::<init>> Constacted user=szweig
    <XMLProvider::addUserToCache> User szweig is loaded ....
    <BPMUserImpl::<init>> Constacted user=mmitch
    <XMLProvider::addUserToCache> User mmitch is loaded ....
    <BPMUserImpl::<init>> Constacted user=jausten
    <XMLProvider::addUserToCache> User jausten is loaded ....
    <BPMUserImpl::<init>> Constacted user=achrist
    <XMLProvider::addUserToCache> User achrist is loaded ....
    <BPMUserImpl::<init>> Constacted user=rsteven
    <XMLProvider::addUserToCache> User rsteven is loaded ....
    <BPMUserImpl::<init>> Constacted user=cdoyle
    <XMLProvider::addUserToCache> User cdoyle is loaded ....
    <BPMUserImpl::<init>> Constacted user=wshake
    <XMLProvider::addUserToCache> User wshake is loaded ....
    <BPMUserImpl::<init>> Constacted user=guest
    <XMLProvider::addUserToCache> User guest is loaded ....
    <BPMUserImpl::<init>> Constacted user=bpeladmin
    <XMLProvider::addUserToCache> User bpeladmin is loaded ....
    <BPMUserImpl::<init>> Constacted user=default
    <XMLProvider::addUserToCache> User default is loaded ....
    <AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users ends
    <AbstractXMLProvider::loadRoles> XMLProvider::load() Load roles from source:users-properties.xml
    <AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users begins
    <XMLProvider::addRoleToCache> Role BPMAnalyst is loaded .....
    <XMLProvider::addRoleToCache> Role BPMWorkflowAdmin is loaded .....
    <AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users ends
    <AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users begins
    <XMLProvider::addRoleToCache> Role LoanAgentGroup is loaded .....
    <XMLProvider::addRoleToCache> Role LoanAnalyticGroup is loaded .....
    <XMLProvider::addRoleToCache> Role LoanAnalyticGroup is loaded .....
    <XMLProvider::addRoleToCache> Role Supervisor is loaded .....
    <XMLProvider::addRoleToCache> Role California is loaded .....
    <XMLProvider::addRoleToCache> Role WesternRegion is loaded .....
    <XMLProvider::addRoleToCache> Role EasternRegion is loaded .....
    <AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users ends
    <XMLAuthorizationService::init> Load provider initialization complete
    <BPMAuthorizationServiceImpl::lookupUser> BPMAuthorizationServiceImpl::lookupUser():: begin, userName=jstein
    <BPMServiceJAZNBase::getRealm> BPMAuthenticationServiceImpl::getRealm():: begin
    <BPMServiceJAZNBase::getRealm> Realm=[Realm: jazn.com]
    <BPMServiceJAZNBase::getRealm> BPMAuthenticationServiceImpl::getRealm():: end
    <BPMUserImpl::<init>> User=jstein was created
    <BPMAuthorizationServiceImpl::lookupUser> User is found, user=RealmUser: jstein
    <BPMIdentityImpl::getActions> BPMIdentityImpl::getActions()
    <BPMIdentityImpl::getAllGrantedRealmRoles> Identity has the following granted realmRoles=[RealmRole: BPMWorkflowReassign, RealmRole: BPMWorkflowSuspend, RealmRole: BPMAnalyst]
    <RoleProperties::load> Resource oracle/tip/pc/services/identity/role.properties is loaded, s_properties={BPMWorkflowSuspend=SUSPEND,RESUME, BPMWorkflowAdmin=ADMIN, BPMWorkflowReassign=REASSIGN, BPMPublic=VIEW_WORK_LIST,ACQUIRE,WITHDRAW,ESCALATE,ERROR,PUSH_BACK,RENEW,RELEASE,REQUEST_INFO,SUBMIT_INFO,CUSTOM,VIEW_TASK_HISTORY,VIEW_SUB_TASKS,UPDATE,ADHOC_ROUTE,OUTCOME_UPDATE_ROUTE, BPMSystemAdmin=, BPMWorkflowViewHistory=VIEW_TASK_HISTORY,VIEW_PROCESS_HISTORY, BPMAnalyst=VIEW_REPORTS}
    <BPMIdentityImpl::getActions> Identity has the following roles:[BPMWorkflowReassign, BPMWorkflowSuspend, BPMAnalyst]
    <BPMIdentityImpl::getActions> Role: BPMWorkflowReassign
    <BPMIdentityImpl::getActions> Actions: [OUTCOME_UPDATE_ROUTE, REQUEST_INFO, CUSTOM, VIEW_SUB_TASKS, WITHDRAW, PUSH_BACK, ACQUIRE, ADHOC_ROUTE, RENEW, UPDATE, SUBMIT_INFO, VIEW_TASK_HISTORY, ERROR, VIEW_WORK_LIST, RELEASE, ESCALATE, REASSIGN]
    <BPMIdentityImpl::getActions> Role: BPMWorkflowSuspend
    <BPMIdentityImpl::getActions> Actions: [RESUME, OUTCOME_UPDATE_ROUTE, REQUEST_INFO, CUSTOM, VIEW_SUB_TASKS, WITHDRAW, PUSH_BACK, SUSPEND, ACQUIRE, ADHOC_ROUTE, RENEW, UPDATE, SUBMIT_INFO, VIEW_TASK_HISTORY, ERROR, VIEW_WORK_LIST, RELEASE, ESCALATE]
    <BPMIdentityImpl::getActions> Role: BPMAnalyst
    <BPMIdentityImpl::getActions> Actions: [OUTCOME_UPDATE_ROUTE, REQUEST_INFO, CUSTOM, VIEW_SUB_TASKS, WITHDRAW, PUSH_BACK, ACQUIRE, ADHOC_ROUTE, RENEW, UPDATE, SUBMIT_INFO, VIEW_TASK_HISTORY, ERROR, VIEW_WORK_LIST, RELEASE, ESCALATE, VIEW_REPORTS]
    <BPMIdentityImpl::getActions> Identity has the following actions:[RESUME, OUTCOME_UPDATE_ROUTE, REQUEST_INFO, CUSTOM, VIEW_SUB_TASKS, WITHDRAW, PUSH_BACK, SUSPEND, ACQUIRE, RENEW, ADHOC_ROUTE, UPDATE, SUBMIT_INFO, VIEW_TASK_HISTORY, VIEW_WORK_LIST, ERROR, ESCALATE, RELEASE, REASSIGN, VIEW_REPORTS]
    <BPMPrincipalImpl::getAttribute> Attribute=languagePreference is not set. Populate principal=jstein
    <::> WorkflowService:: VerificationService.authenticateUser: successful for user = jstein identityContext = null
    <::> WorkflowService:: TaskQueryService.authenticate(): completed. token = c9pHcmBFtc4DWR0OLJvz8rFEzdme6Pp2TZRWe5OrGZEHVSHodTb5cYfhEt/ZgboPeVZZzz9FipCUi4EMWqyqKIXfQxTW8YdqoisIJyA4TUhFa2SyU0fNHjDEy9sm/JSYqqFy/nvYWsjO2nPXdsbbnpLuHUwoM2IZ+D/mTaN6pgcIPS+iyKbVgV3wBqFiqGHbuasTyn7SE6ZBnw3Xr5QOHQ==
    <::> VerificationService.createWorkflowContext: Request NOT authenticated by WS-Security framework
    <BPMAuthorizationServiceImpl::lookupUser> BPMAuthorizationServiceImpl::lookupUser():: begin, userName=jstein
    <BPMUserImpl::<init>> User=jstein was created
    <BPMAuthorizationServiceImpl::lookupUser> User is found, user=RealmUser: jstein
    <BPMPrincipalImpl::getAttribute> Attribute=languagePreference is not set. Populate principal=jstein
    <::> WorkflowService:: TaskQueryService.queryTasks(): called. token = c9pHcmBFtc4DWR0OLJvz8rFEzdme6Pp2TZRWe5OrGZEHVSHodTb5cYfhEt/ZgboPeVZZzz9FipCUi4EMWqyqKIXfQxTW8YdqoisIJyA4TUhFa2SyU0fNHjDEy9sm/JSYqqFy/nvYWsjO2nPXdsbbnpLuHUwoM2IZ+D/mTaN6pgcIPS+iyKbVgV3wBqFiqGHbuasTyn7SE6ZBnw3Xr5QOHQ== ctxUser = jstein displayColumns = TASKID, TASKNUMBER, TITLE, OUTCOME optionalInformation = assignmentFilter = My keywords = null predicate = null ordering = wfn.taskNumber ASC startRow = 0 endRow = 0
    <::> WorkflowService:: TaskQueryService.getCombinedPredicate(): called. token = c9pHcmBFtc4DWR0OLJvz8rFEzdme6Pp2TZRWe5OrGZEHVSHodTb5cYfhEt/ZgboPeVZZzz9FipCUi4EMWqyqKIXfQxTW8YdqoisIJyA4TUhFa2SyU0fNHjDEy9sm/JSYqqFy/nvYWsjO2nPXdsbbnpLuHUwoM2IZ+D/mTaN6pgcIPS+iyKbVgV3wBqFiqGHbuasTyn7SE6ZBnw3Xr5QOHQ== ctxUser = jstein assignmentFilter = My keywords = null predicate = null
    <::> WorkflowService:: TaskQueryService.getAssignmentFilterPredicate(): called. token = c9pHcmBFtc4DWR0OLJvz8rFEzdme6Pp2TZRWe5OrGZEHVSHodTb5cYfhEt/ZgboPeVZZzz9FipCUi4EMWqyqKIXfQxTW8YdqoisIJyA4TUhFa2SyU0fNHjDEy9sm/JSYqqFy/nvYWsjO2nPXdsbbnpLuHUwoM2IZ+D/mTaN6pgcIPS+iyKbVgV3wBqFiqGHbuasTyn7SE6ZBnw3Xr5QOHQ== ctxUser = jstein assignmentFilter = My
    <::> WorkflowService:: TaskQueryService.getAssignmentFilterPredicate(): completed. assignmentFilterPred = ((wfn.taskId=wfa.taskId AND wfa.isGroup =? AND ( wfa.assignee IN (?))) OR ( ( wfn.originalAssigneeUser IN (?)) AND wfn.taskId=wfa.taskId) AND wfn.isGroup =?) AND ( wfn.identityContext IS NULL )
    <::> WorkflowService:: TaskQueryService.getCombinedPredicate(): completed. combinedPredicate = ((wfn.taskId=wfa.taskId AND wfa.isGroup =? AND ( wfa.assignee IN (?))) OR ( ( wfn.originalAssigneeUser IN (?)) AND wfn.taskId=wfa.taskId) AND wfn.isGroup =?) AND ( wfn.identityContext IS NULL )
    ERROR: exception symbol "09732" not found in resource file.
    <::> ORABPEL-09732
    <::>
    <::>
    <::>      at oracle.bpel.services.workflow.repos.PersistencyDriver.getNonTransactionService(PersistencyDriver.java:231)
    <::>      at oracle.bpel.services.workflow.repos.PersistencyDriver.getInstance(PersistencyDriver.java:152)
    <::>      at oracle.bpel.services.workflow.query.impl.TaskQueryService.queryTasks(TaskQueryService.java:213)
    <::>      at oracle.bpel.services.workflow.query.impl.TaskQueryServiceWSIF.queryTasks(TaskQueryServiceWSIF.java:172)
    <::>      at oracle.bpel.services.workflow.query.client.TaskQueryServiceWSIFClient.queryTasks(TaskQueryServiceWSIFClient.java:66)
    <::>      at oracle.bpel.services.workflow.query.client.AbstractDOMTaskQueryServiceClient.queryTasks(AbstractDOMTaskQueryServiceClient.java:180)
    <::>      at project1.Class1.TryTask(Class1.java:55)
    <::>      at project1.Class1.main(Class1.java:91)
    <::> Caused by: java.lang.NullPointerException
    <::>      at oracle.bpel.services.workflow.repos.PersistencyDriver.getDatasourceName(PersistencyDriver.java:177)
    <::>      at oracle.bpel.services.workflow.repos.PersistencyDriver.initNonTransactionDataSource(PersistencyDriver.java:198)
    <::>      at oracle.bpel.services.workflow.repos.PersistencyDriver.getNonTransactionService(PersistencyDriver.java:224)
    <::>      ... 7 more
    <2008-10-14 23:59:00,952> <ERROR> <oracle.bpel.services> <::>
    java.lang.NullPointerException
         at oracle.bpel.services.workflow.repos.PersistencyDriver.getDatasourceName(PersistencyDriver.java:177)
         at oracle.bpel.services.workflow.repos.PersistencyDriver.initNonTransactionDataSource(PersistencyDriver.java:198)
         at oracle.bpel.services.workflow.repos.PersistencyDriver.getNonTransactionService(PersistencyDriver.java:224)
         at oracle.bpel.services.workflow.repos.PersistencyDriver.getInstance(PersistencyDriver.java:152)
         at oracle.bpel.services.workflow.query.impl.TaskQueryService.queryTasks(TaskQueryService.java:213)
         at oracle.bpel.services.workflow.query.impl.TaskQueryServiceWSIF.queryTasks(TaskQueryServiceWSIF.java:172)
         at oracle.bpel.services.workflow.query.client.TaskQueryServiceWSIFClient.queryTasks(TaskQueryServiceWSIFClient.java:66)
         at oracle.bpel.services.workflow.query.client.AbstractDOMTaskQueryServiceClient.queryTasks(AbstractDOMTaskQueryServiceClient.java:180)
         at project1.Class1.TryTask(Class1.java:55)
         at project1.Class1.main(Class1.java:91)
    Caught workflow exception:
    Process exited with exit code 0.

    Although the versions 10.1.3.4 and 10.1.3.3 are close and should be able to use 10.1.3.4 JDev for most 10.1.3.3 development, the human tasks is the one exception. 10.1.3.3 had a few bugs fixed therefore the jar file used in JDev 10.1.3.4 may not be compatible with 10.1.3.3.
    I would either use JDev 10.1.3.3 or upgrade SOA Suite to 10.1.3.4
    cheers
    James

  • Urgent: IMP-00034: Warning: FromUser "USER1" not found in export file

    Hello all
    I succeccfully export DMP file using sys user with the option full=y.
    I want now to import the schema objects for the user1 with the folloing command:
    C:\oracle\ora81\bin\IMP.EXE sys/sys@bas fromuser=user1 touser=scott file=C:\omran12-06-2005.dmp
    But I received this error :
    IMP-00034: Warning: FromUser "OMBR" not found in export file
    Import terminated successfully with warnings.
    What is the problem
    Thanks in advance

    Hello
    Thanks for ur replay but doesn't work at all:
    - Itried the first by creatint the user and i received this error:
    C:\oracle\ora81\bin\IMP.EXE newuser/newnewuser@sid file=C:\x.dmp log=c:\log.log full=y
    Warning: the objects were exported by SYSTEM, not by you
    import done in AR8MSAWIN character set and AR8MSAWIN NCHAR character set
    . importing SYSTEM's objects into OMBR1
    Import terminated successfully without warnings.
    Then I tried this:
    C:\>C:\oracle\ora81\bin\IMP.EXE sys/sys@sid file=C:\x.dmp log=c:\log.log full=y show=y
    I received this:
    Warning: the objects were exported by SYSTEM, not by you
    import done in AR8MSAWIN character set and AR8MSAWIN NCHAR character set
    . importing SYSTEM's objects into SYS
    Import terminated successfully without warnings.
    Then i tried this:
    C:\>C:\oracle\ora81\bin\IMP.EXE system/system@sid file=C:\x.dmp log=c:\log.log full=y show=y
    And I get this error:
    Export file created by EXPORT:V08.01.07 via conventional path
    import done in AR8MSAWIN character set and AR8MSAWIN NCHAR character set
    . importing SYSTEM's objects into SYSTEM
    Import terminated successfully without warnings.
    Why nothing work with me????????

  • TNS-12560: Message 12560 not found; No message file for product=NETWORK

    I have downloaded and installed the SQL *Plus client software from the URL http://www.oracle.com/technology/tech/sql_plus/index.html
    This should help me connect to the Oracle database
    Following is the error I have in the sqlnet.log file (located at C:\oracle\product\10.2.0\client_1\BIN)
    Fatal NI connect error 12560, connecting to:
    (DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleORCL)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=ORCL)(CID=(PROGRAM=C:\oracle\product\10.2.0\client_1\BIN\sqlplus.exe)(HOST=PEM270639IC)(USER=mattut))))
    VERSION INFORMATION:
    TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
    Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
    Time: 10-SEP-2007 10:45:13
    Tracing not turned on.
    Tns error struct:
    ns main err code: 12560
    TNS-12560: Message 12560 not found; No message file for product=NETWORK, facility=TNS
    ns secondary err code: 0
    nt main err code: 530
    TNS-00530: Message 530 not found; No message file for product=NETWORK, facility=TNS
    nt secondary err code: 126
    nt OS err code: 0

    Where are you trying to connect to?
    If you want a local database you must down and install for example the Oracle 10 Express

  • Problem deploying connector: META-INF/ejb-jar.xml not found in jar file

              Has anyone seen this problem:
              I built Sun's Blackbox implementation and packaged
              it identical to the BlackBoxNoTx.rar included with
              Weblogic's 'jconnector' sample (even using the same
              ra.xml and weblogic-ra.xml). When I try to deploy
              it, the server reports:
              java.io.FileNotFoundException:
              META-INF/ejb-jar.xml not found in jar file
              I have no idea why the server thinks my connector
              is an EJB. If I deploy the BlackBoxNoTx.rar included
              with the sample, everything works without a hitch.
              The only variable that I'm changing in my BlackBoxNoTx.rar
              is that I build the Blackbox classes myself--otherwise,
              the RAR packagings are identical. Any assistance is
              greatly appreciated since I'm banging my head against
              a wall...
              Thanks,
              -jason
              

              I was finally able to resolve this one. On the odd chance that someone else encounters
              the same problem, here's what went wrong:
              My RAR file had two directories: 'META-INF' and 'meta-inf'. The first was created
              by the jar tool and contained the manifest.mf file. The second I created manually
              and it contained my ra.xml and weblogic-ra.xml. When I examined the RAR using
              any tools or I extracted the contents, it looked like it only contained one directory:
              META-INF (because NT is case-insensitive).
              "Jason L" <[email protected]> wrote:
              >
              >Has anyone seen this problem:
              >
              >I built Sun's Blackbox implementation and packaged
              >it identical to the BlackBoxNoTx.rar included with
              >Weblogic's 'jconnector' sample (even using the same
              >ra.xml and weblogic-ra.xml). When I try to deploy
              >it, the server reports:
              >
              >java.io.FileNotFoundException:
              >META-INF/ejb-jar.xml not found in jar file
              >
              >I have no idea why the server thinks my connector
              >is an EJB. If I deploy the BlackBoxNoTx.rar included
              >with the sample, everything works without a hitch.
              >The only variable that I'm changing in my BlackBoxNoTx.rar
              >is that I build the Blackbox classes myself--otherwise,
              >the RAR packagings are identical. Any assistance is
              >greatly appreciated since I'm banging my head against
              >a wall...
              >
              >Thanks,
              >
              >-jason
              

  • Profit center not found in controlling area

    Hello all,
    While trying to change the wbs element of a PO in ME22N, I am getting the error message "Profit center XXXX not found in controlling area".
    Do any one hava an idea how to fix this problem?
    Thanks in advance for your help,
    Soumaya

    Check whether the PC Hierarchy has been defined or not in KCH5N / KCH6N for your Controlling area.
    Single PC - Check in KE53.
    If not, you need to define the PC Standard Hierarchy
    Thanks

Maybe you are looking for

  • How to place the date in photos

    How can you place the date in photos as they are taken?

  • Windows 2000 or XP

    I want to purchase a gps but it will only use windows and internet explorer for support. Has anyone had trouble with Safari if they load internet Explorer on the windows side? I don't want to use MS Internet Explorer as my primary internet server.

  • Why responsibility is not show for my user?

    Hi experts, Recently i need to enable one responsibility(named as R below) for my user. As i examined, R is already assigned to the user but it's expired, so i set the end date as null. Further more, i found that R itself has an expiration date and i

  • No audio-manufacture does not support firefox-won't help me

    after several years with Firefox I lost my audio and when I phoned for support from the manufacturer (Toshiba) they said they do not support Firefox. I have to use internet explorer. I can get audio when I do that but I preferred Firefox.

  • IWeb & FrontPage for Mac's

    Yo! I've only had a mac for a couple of months & just got round to sorting out my websites that I had designed on my PC with Microsoft FrontPage. However, iWeb doesnae recognise them, so I can't even open them on my mac, never mind edit & publish the