ORA-19690 while Duplicating database

Hi all,
While duplication database sehd to Test1 is done successfully,but duplication database sehd to Test2 RMAN is giving below error:
released channel: aux4
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 08/02/2009 09:32:58
RMAN-03015: error occurred in stored script Memory Script
ORA-19870: error reading backup piece sehd1_HOT0_200907252130_06kl23s9_1_1693178249
ORA-19690: backup piece release 10.2.0.3.0 incompatible with Oracle release 10.2.0.0.0
Production: Oracle 11.1.0.7
db_name:sehd ,compatable=10.2.0.3
Test1: Oracle 11.1.0.7
db_name=test1,compatable=10.2.0.3
Test2: Oracle 10.2.0.3
db_name=test2,compatable=10.2.0.3
I have seen the metalink Auxilary database comapatable greater or equal to Target database.
Thanks
VIJAY

Baipaneni wrote:
Hi all,
While duplication database sehd to Test1 is done successfully,but duplication database sehd to Test2 RMAN is giving below error:
ORA-19690: backup piece release 10.2.0.3.0 incompatible with Oracle release 10.2.0.0.0You can't duplicate database where the source database RDMBS is higher then the target RDBMS.
ORA error that you oracle gave you for this fail is when you look at it's definition pretty much self explanatory
If you still want to have target's database data(seh) in the test database(test2) , you could use export or datapump utilities of the source database to export data from 'seh' and then with the utilities from the same version you did export , import them into target, which is your case 'test2' db .
Also you could check 208237.1 on meetlink.
Thanksok
VIJAY

Similar Messages

Error while duplicating database for building dataguard(standby)

RMAN> duplicate target database for standby dorecover;
Starting Duplicate Db at 25-MAY-13
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=17 device type=DISK
contents of Memory Script:
set until scn 874292;
sql clone "alter system set control_files =
''/u01/app/oracle/oradata/STANDBY/controlfile/o1_mf_8sz086mc_.ctl'', ''/u01/app/oracle/flash_recovery_area/STANDBY/controlfile/o1_mf_8sz087vk_.ctl'' comment=
''Set by RMAN'' scope=spfile";
restore clone standby controlfile;
executing Memory Script
executing command: SET until clause
sql statement: alter system set control_files = ''/u01/app/oracle/oradata/STANDBY/controlfile/o1_mf_8sz086mc_.ctl'', ''/u01/app/oracle/flash_recovery_area/STANDBY/controlfile/o1_mf_8sz087vk_.ctl'' comment= ''Set by RMAN'' scope=spfile
Starting restore at 25-MAY-13
using channel ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece /u01/PRBACKUP/0doahj1f_1_1
channel ORA_AUX_DISK_1: ORA-19870: error while restoring backup piece /u01/PRBACKUP/0doahj1f_1_1
ORA-19505: failed to identify file "/u01/PRBACKUP/0doahj1f_1_1"
ORA-27041: unable to open file
Linux Error: 13: Permission denied
Additional information: 9
failover to previous backup
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece /u01/PRBACKUP/0aoaeo7l_1_1
channel ORA_AUX_DISK_1: ORA-19870: error while restoring backup piece /u01/PRBACKUP/0aoaeo7l_1_1
ORA-19505: failed to identify file "/u01/PRBACKUP/0aoaeo7l_1_1"
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
failover to previous backup
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece /u01/PRBACKUP/08oaeo63_1_1
channel ORA_AUX_DISK_1: ORA-19870: error while restoring backup piece /u01/PRBACKUP/08oaeo63_1_1
ORA-19505: failed to identify file "/u01/PRBACKUP/08oaeo63_1_1"
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
failover to previous backup
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 05/25/2013 17:13:24
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06024: no backup or copy of the control file found to restore
can anybody tell me what should I do....

Hello;
Kind of hard without seeing everything but based on this :
channel ORA_AUX_DISK_1: ORA-19870: error while restoring backup piece /u01/PRBACKUP/0doahj1f_1_1
ORA-19505: failed to identify file "/u01/PRBACKUP/0doahj1f_1_1"
ORA-27041: unable to open file
Linux Error: 13: Permission deniedIf appears you have an OS permission on "/u01/PRBACKUP/" or the file is just missing.
If it helps here are my notes on this :
http://www.visi.com/~mseberg/duprman.html
http://www.visi.com/~mseberg/duprman2.html
Best Regards
mseberg

Getting ORA-32700 while creating database

I am getting following error when creating the database :
ORA-32700 error occurred in DIAG Group Service
The error description is as follows :
Cause: An unexpected error occurred while performing a DIAG Group Service operation.
Action: Verify that the DIAG process is still active. Also, check the Oracle DIAG trace files for errors.
The setup is as follows :
Database : Oracle 9i Rel 2.
OS : IBM AIX 4.3.3
We are trying to create the database from sqlplus/dbca. It seems that in the database creation process it is throwing the error while it is trying to create the control files.
listener.ora :
LSNR_TSEDMDB2 =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = prcsmbk1)(PORT = 1522))
TNSNAMES.ORA
LISTENER_TSEDMDB2 =
(ADDRESS = (PROTOCOL = TCP)(HOST = prcsmbk1)(PORT = 1522))
We have IBM HACMP Cluster setup on 3 machines. This machine (prcsmbk1) on which I am getting the error while creating the database is part of that HACMP cluster. While installing the Oracle database software also it gave me a list of the 3 machines which are in HACMP cluster. We are not planning to setup RAC, but still it seems like while creating the database control files Oracle is trying to perform some group service operation.
Alert log :
Sat Jan 3 03:31:18 2004
Starting ORACLE instance (normal)
Sat Jan 3 03:31:18 2004
Global Enqueue Service Resources = 64, pool = 4
Sat Jan 3 03:31:18 2004
Global Enqueue Service Enqueues = 128
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
GES IPC: Receivers 1 Senders 1
GES IPC: Buffers Receive 1000 Send 530 Reserve 300
GES IPC: Msg Size Regular 432 Batch 2048
SCN scheme 3
Using log_archive_dest parameter default value
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up ORACLE RDBMS Version: 9.2.0.4.0.
System parameters with non-default values:
processes = 150
timed_statistics = TRUE
shared_pool_size = 117440512
large_pool_size = 16777216
java_pool_size = 117440512
control_files = /u01/app/oracle/oradata/TSEDMDB2/control01.ctl
db_block_size = 8192
db_cache_size = 33554432
compatible = 9.2.0.0.0
db_file_multiblock_read_count= 16
fast_start_mttr_target = 300
undo_management = AUTO
undo_tablespace = UNDOTBS1
undo_retention = 10800
remote_login_passwordfile= EXCLUSIVE
db_domain =
instance_name = TSEDMDB2
dispatchers = (PROTOCOL=TCP) (SERVICE=TSEDMDB2XDB)
local_listener = LISTENER_TSEDMDB2
job_queue_processes = 10
hash_join_enabled = TRUE
background_dump_dest = /u01/app/oracle/admin/TSEDMDB2/bdump
user_dump_dest = /u01/app/oracle/admin/TSEDMDB2/udump
core_dump_dest = /u01/app/oracle/admin/TSEDMDB2/cdump
sort_area_size = 524288
db_name = TSEDMDB2
open_cursors = 300
star_transformation_enabled= FALSE
query_rewrite_enabled = FALSE
pga_aggregate_target = 25165824
aq_tm_processes = 1
Sat Jan 3 03:31:19 2004
clUster interconnect IPC version:Oracle UDP/IP
IPC Vendor 1 proto 2 Version 1.0
PMON started with pid=2
DIAG started with pid=3
LMON started with pid=4
LMD0 started with pid=5
DBW0 started with pid=6
LGWR started with pid=7
CKPT started with pid=8
SMON started with pid=9
RECO started with pid=10
CJQ0 started with pid=11
QMN0 started with pid=12
Sat Jan 3 03:31:24 2004
starting up 1 shared server(s) ...
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
Sat Jan 3 03:31:25 2004
Create controlfile reuse set database TSEDMDB2
MAXINSTANCES 1
MAXLOGHISTORY 1
MAXLOGFILES 50
MAXLOGMEMBERS 5
MAXDATAFILES 100
Datafile
'/u01/app/oracle/oradata/TSEDMDB2/cwmlite01.dbf' ,
'/u01/app/oracle/oradata/TSEDMDB2/drsys01.dbf' ,
'/u01/app/oracle/oradata/TSEDMDB2/example01.dbf' ,
'/u01/app/oracle/oradata/TSEDMDB2/indx01.dbf' ,
'/u01/app/oracle/oradata/TSEDMDB2/odm01.dbf' ,
'/u01/app/oracle/oradata/TSEDMDB2/system01.dbf' ,
'/u01/app/oracle/oradata/TSEDMDB2/tools01.dbf' ,
'/u01/app/oracle/oradata/TSEDMDB2/undotbs01.dbf' ,
'/u01/app/oracle/oradata/TSEDMDB2/users01.dbf' ,
'/u01/app/oracle/oradata/TSEDMDB2/xdb01.dbf'
LOGFILE GROUP 1 ('/u01/app/oracle/oradata/TSEDMDB2/redo01.log') SIZE 102400K,
GROUP 2 ('/u01/app/oracle/oradata/TSEDMDB2/redo02.log') SIZE 102400K,
GROUP 3 ('/u01/app/oracle/oradata/TSEDMDB2/redo03.log') SIZE 102400K RESETLOGS
Sat Jan 3 03:31:25 2004
ORA-1503 signalled during: Create controlfile reuse set database TSEDMDB2
MAX...
Sat Jan 3 03:32:28 2004
Restarting dead background process QMN0
QMN0 started with pid=15
Sat Jan 3 03:32:28 2004
Shutting down instance (abort)
License high water mark = 3
Instance terminated by USER, pid = 47128
Diag trace file :
/u01/app/oracle/admin/TSEDMDB2/bdump/tsedmdb2_diag_49754.trc
Oracle9i Enterprise Edition Release 9.2.0.4.0 - 64bit Production
With the Partitioning, Real Application Clusters, OLAP and Oracle Data Mining options
JServer Release 9.2.0.4.0 - Production
ORACLE_HOME = /u01/app/oracle/product/9.2.0
System name: AIX
Node name: prcsmbk1
Release: 3
Version: 4
Machine: 0002599F4C00
Instance name: TSEDMDB2
Redo thread mounted by this instance: 0 <none>
Oracle process number: 0
49754
Number of Serviceable Networks detected is less than 2
Disabling Transparent Network Failover Feature.
*** SESSION ID:(2.1) 2004-01-03 03:31:19.886
kjzcprt:rcv port created
kjzmreg2: slos err[1 19 [HA_GS_CONNECT_FAILED] sskgxn_gs_in 19]
[kjzmreg2]: Error [category=1] is encountered
Node monitor problem:[32700][kjzmreg2]
Membership is lost in DIAG group
Any help is appreciated. Thanks in advance.

Thanks a lot for all your responses. We found the issue. The issue was that when we installed 9i we selected Enterprise option which installed RAC also. And after that when we were trying to create database Oracle was thinking that we are trying to create database in RAC env. and most likely it was trying to create/sync the control files on all the machines in the cluster.
The sequence of events were as below :
1. We have 8i installed on this machine
2. We installed 9i (9.2.0.1.0) using the same ORACLE_BASE but different ORACLE_HOME. We didn't select "Custom Install". We selected "Enterprise install" option
3. We installed new installer (2.2.0.18.0 ) and then 9i patch (9.2.0.4.0)
4. While creating the database (manually & through DBCA) we were getting ORA-32700
5. We tried to uninstall (using OUI 2.2.0.18.0) 9i (including the patch) completely but it never succeeded. We noticed that when we started uninstall it did show progress for about 20 minutes and after that it didn't show any progress. It was not taking any CPU cycles and It was not writing to the log file either. Basically we were never able to cleanly uninstall 9i. We tried almost 2 to 3 times.
6. Then we installed 9i using a new ORACLE_BASE and this time we selected "Custom Install" and we did not install RAC. This is successful
7. Then we installed new installer (2.2.0.18.0 ) and we tried to install the 9i patch (9.2.0.4.0) using this new installer but it never succeeded. Then we tried to install the 9i patch (9.2.0.4.0) using the old installer version (2.2.0.11.0) and it was also successful.
8. Then we tried to create database using DBCA and it was successful and then we dropped the database which was created using DBCA and then we created it manually through SQLPLUS and this was fine too.
So basically what we learned from this exercise is that if we are installing 9i on a machine which is part of a cluster and if we don't plan to setup RAC then we shouldn't install RAC and we should do a custom install. I wish there was a option in create database stmt to tell Oracle that though we are creating database on a machine which is part of a cluster environment but we don't intend to setup RAC.
And other thing which is still a mystery is that why does the uninstall never completes successfully. One question on this : We were using the installer version 2.2.0.18.0 to uninstall the 9i software. Do we need to use the older version (2.2.0.11.0) of the OUI?

Control file failed error while duplicating database using RMAN

I am using oracle database 10g R2 and trying to make a clone of the source database orcl on the same machine but with different directory structure with the name of test.
When i run the duplicate command to create test database, then following error is generted:
D:\>rman target sys@orcl nocatalog auxiliary /
Recovery Manager: Release 10.2.0.1.0 - Production on Fri Nov 11 12:13:26 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
target database Password:
connected to target database: ORCL (DBID=1264668332)
using target database control file instead of recovery catalog
connected to auxiliary database: TEST (not mounted)
RMAN> @script.txt
RMAN> Run {
2> Allocate channel C1 type disk;
3> allocate auxiliary channel 'adisk_0' type DISK;
4> duplicate target database to "test";
5> #BACKUP INCREMENTAL LEVEL 1 DATABASE;
6> #BACKUP INCREMENTAL LEVEL 1 CUMULATIVE DATABASE;
7> #BACKUP INCREMENTAL LEVEL 0 DATABASE;
8> #delete obsolete;
9> }
allocated channel: C1
channel C1: sid=140 devtype=DISK
allocated channel: adisk_0
channel adisk_0: sid=157 devtype=DISK
Starting Duplicate Db at 11-NOV-11
contents of Memory Script:
   set until scn 12926250;
   set newname for datafile 1 to
"D:\TEST\ORADATA\SYSTEM01.DBF";
   set newname for datafile 2 to
"D:\TEST\ORADATA\UNDOTBS01.DBF";
   set newname for datafile 3 to
"D:\TEST\ORADATA\SYSAUX01.DBF";
   set newname for datafile 4 to
"D:\TEST\ORADATA\USERS01.DBF";
   set newname for datafile 5 to
"D:\TEST\ORADATA\EXAMPLE01.DBF";
   set newname for datafile 6 to
"D:\TEST\ORADATA\GL.DBF";
   restore
   check readonly
   clone database
executing Memory Script
executing command: SET until clause
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
Starting restore at 11-NOV-11
channel adisk_0: starting datafile backupset restore
channel adisk_0: specifying datafile(s) to restore from backup set
restoring datafile 00001 to D:\TEST\ORADATA\SYSTEM01.DBF
restoring datafile 00002 to D:\TEST\ORADATA\UNDOTBS01.DBF
restoring datafile 00003 to D:\TEST\ORADATA\SYSAUX01.DBF
restoring datafile 00004 to D:\TEST\ORADATA\USERS01.DBF
restoring datafile 00005 to D:\TEST\ORADATA\EXAMPLE01.DBF
restoring datafile 00006 to D:\TEST\ORADATA\GL.DBF
channel adisk_0: reading from backup piece D:\FLASH_RECOVERY_AREA\ORCL\BACKUPSET\2011_11_07\O1_MF_NNND0_TAG20111107T220822_7CJ
P
channel adisk_0: restored backup piece 1
piece handle=D:\FLASH_RECOVERY_AREA\ORCL\BACKUPSET\2011_11_07\O1_MF_NNND0_TAG20111107T220822_7CJ44MH4_.BKP tag=TAG20111107T220
channel adisk_0: restore complete, elapsed time: 00:01:46
Finished restore at 11-NOV-11
sql statement: CREATE CONTROLFILE REUSE SET DATABASE "TEST" RESETLOGS ARCHIVELOG
MAXLOGFILES     16
MAXLOGMEMBERS      3
MAXDATAFILES      100
MAXINSTANCES     8
MAXLOGHISTORY      292
LOGFILE
GROUP 1 ( 'D:\TEST\ORADATA\REDO01.LOG' ) SIZE 50 M REUSE,
GROUP 2 ( 'D:\TEST\ORADATA\REDO02.LOG' ) SIZE 50 M REUSE,
GROUP 3 ( 'D:\TEST\ORADATA\REDO03.LOG' ) SIZE 50 M REUSE
DATAFILE
'D:\TEST\ORADATA\SYSTEM01.DBF'
CHARACTER SET WE8MSWIN1252
contents of Memory Script:
   switch clone datafile all;
executing Memory Script
datafile 2 switched to datafile copy
input datafile copy recid=1 stamp=766930525 filename=D:\TEST\ORADATA\UNDOTBS01.DBF
datafile 3 switched to datafile copy
input datafile copy recid=2 stamp=766930525 filename=D:\TEST\ORADATA\SYSAUX01.DBF
datafile 4 switched to datafile copy
input datafile copy recid=3 stamp=766930526 filename=D:\TEST\ORADATA\USERS01.DBF
datafile 5 switched to datafile copy
input datafile copy recid=4 stamp=766930526 filename=D:\TEST\ORADATA\EXAMPLE01.DBF
datafile 6 switched to datafile copy
input datafile copy recid=5 stamp=766930526 filename=D:\TEST\ORADATA\GL.DBF
contents of Memory Script:
   set until scn 12926250;
   recover
   clone database
    delete archivelog
executing Memory Script
executing command: SET until clause
Starting recover at 11-NOV-11
channel adisk_0: starting incremental datafile backupset restore
channel adisk_0: specifying datafile(s) to restore from backup set
destination for restore of datafile 00001: D:\TEST\ORADATA\SYSTEM01.DBF
destination for restore of datafile 00002: D:\TEST\ORADATA\UNDOTBS01.DBF
destination for restore of datafile 00003: D:\TEST\ORADATA\SYSAUX01.DBF
destination for restore of datafile 00004: D:\TEST\ORADATA\USERS01.DBF
destination for restore of datafile 00005: D:\TEST\ORADATA\EXAMPLE01.DBF
destination for restore of datafile 00006: D:\TEST\ORADATA\GL.DBF
channel adisk_0: reading from backup piece D:\FLASH_RECOVERY_AREA\ORCL\BACKUPSET\2011_11_09\O1_MF_NNND1_TAG20111109T223628_7CO
P
channel adisk_0: restored backup piece 1
piece handle=D:\FLASH_RECOVERY_AREA\ORCL\BACKUPSET\2011_11_09\O1_MF_NNND1_TAG20111109T223628_7COGJZVT_.BKP tag=TAG20111109T223
channel adisk_0: restore complete, elapsed time: 00:00:07
channel adisk_0: starting incremental datafile backupset restore
channel adisk_0: specifying datafile(s) to restore from backup set
destination for restore of datafile 00001: D:\TEST\ORADATA\SYSTEM01.DBF
destination for restore of datafile 00002: D:\TEST\ORADATA\UNDOTBS01.DBF
destination for restore of datafile 00003: D:\TEST\ORADATA\SYSAUX01.DBF
destination for restore of datafile 00004: D:\TEST\ORADATA\USERS01.DBF
destination for restore of datafile 00005: D:\TEST\ORADATA\EXAMPLE01.DBF
destination for restore of datafile 00006: D:\TEST\ORADATA\GL.DBF
channel adisk_0: reading from backup piece D:\FLASH_RECOVERY_AREA\ORCL\BACKUPSET\2011_11_10\O1_MF_NNND1_TAG20111110T221428_7CR
P
channel adisk_0: restored backup piece 1
piece handle=D:\FLASH_RECOVERY_AREA\ORCL\BACKUPSET\2011_11_10\O1_MF_NNND1_TAG20111110T221428_7CR1MQFO_.BKP tag=TAG20111110T221
channel adisk_0: restore complete, elapsed time: 00:00:16
starting media recovery
archive log thread 1 sequence 524 is already on disk as file D:\FLASH_RECOVERY_AREA\ORCL\ARCHIVELOG\2011_11_11\O1_MF_1_524_7CS
C
archive log filename=D:\FLASH_RECOVERY_AREA\ORCL\ARCHIVELOG\2011_11_11\O1_MF_1_524_7CSG2HVT_.ARC thread=1 sequence=524
media recovery complete, elapsed time: 00:00:14
Finished recover at 11-NOV-11
contents of Memory Script:
   shutdown clone;
   startup clone nomount ;
executing Memory Script
database dismounted
Oracle instance shut down
connected to auxiliary database (not started)
Oracle instance started
Total System Global Area     230686720 bytes
Fixed Size                     1248236 bytes
Variable Size                 67109908 bytes
Database Buffers             155189248 bytes
Redo Buffers                   7139328 bytes
sql statement: CREATE CONTROLFILE REUSE SET DATABASE "TEST" RESETLOGS ARCHIVELOG
MAXLOGFILES     16
MAXLOGMEMBERS      3
MAXDATAFILES      100
MAXINSTANCES     8
MAXLOGHISTORY      292
LOGFILE
GROUP 1 ( 'D:\TEST\ORADATA\REDO01.LOG' ) SIZE 50 M REUSE,
GROUP 2 ( 'D:\TEST\ORADATA\REDO02.LOG' ) SIZE 50 M REUSE,
GROUP 3 ( 'D:\TEST\ORADATA\REDO03.LOG' ) SIZE 50 M REUSE
DATAFILE
'D:\TEST\ORADATA\SYSTEM01.DBF'
CHARACTER SET WE8MSWIN1252
released channel: C1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 11/11/2011 12:16:21
RMAN-06136: ORACLE error from auxiliary database: ORA-01503: CREATE CONTROLFILE failed
ORA-01504: database name 'TEST' does not match parameter db_name 'orcl'
RMAN> **end-of-file**
Script.txt
Run {
Allocate channel C1 type disk;
allocate auxiliary channel 'adisk_0' type DISK;
duplicate target database to "test";
}Kindly help?

Moazzam wrote:
RMAN-06136: ORACLE error from auxiliary database: ORA-01503: CREATE CONTROLFILE failed
ORA-01504: database name 'TEST' does not match parameter db_name 'orcl'
Kindly help?>Please check what is the value of parameter db_name in the standby database? It should be match with TEST name
Cheers

Control File error while duplicating Database through Rman

Hi,
Oracle Ver: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
Os:Win Xp
I am trying to create a Standby through Rman....
I am using this Run Block to take backup of Primary Database.......
run {
allocate channel d1 type disk;
allocate channel d2 type disk;
setlimit channel d1 kbytes 2097150;
setlimit channel d2 kbytes 2097150;
backup incremental level 0 format 'e:\Oracle\standby\rman\df_%U' database
include current controlfile for standby;
sql "alter system archive log current";
backup
archivelog all format 'e:\Oracle\standby\rman\al_%U' delete input;
}After taking the Backup when I am trying to create the standby with Duplicate command it s giving me Error...
The Run Block I am using is ......
RMAN> run {
2> allocate auxiliary channel dup1 type disk;
3> allocate auxiliary channel dup2 type disk;
4> set newname for datafile 1 to 'E:\Oracle\standby\system01.dbf';
5> set newname for datafile 2 to 'E:\Oracle\standby\UNDOTBS01.DBF';
6> set newname for datafile 3 to 'E:\Oracle\standby\SYSAUX01.DBF';
7> set newname for datafile 4 to 'E:\Oracle\standby\USERS01.DBF';
8> duplicate target database for standby
9> dorecover;
10> }
allocated channel: dup1
channel dup1: sid=37 devtype=DISK
allocated channel: dup2
channel dup2: sid=36 devtype=DISK
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
Starting Duplicate Db at 02-OCT-08
contents of Memory Script:
   set until scn 1105194;
   restore clone standby controlfile;
   sql clone 'alter database mount standby database';
executing Memory Script
executing command: SET until clause
Starting restore at 02-OCT-08
channel dup1: starting datafile backupset restore
channel dup1: restoring control file
channel dup1: reading from backup piece E:\ORACLE\STANDBY\RMAN\DF_0VJS4RS7_1_1
channel dup1: restored backup piece 1
piece handle=E:\ORACLE\STANDBY\RMAN\DF_0VJS4RS7_1_1 tag=TAG20081002T124502
channel dup1: restore complete, elapsed time: 00:00:01
output filename=D:\ORACLE\PRODUCT\10.2.0\DB_1\DATABASE\CTL1STANDBY.ORA
Finished restore at 02-OCT-08
sql statement: alter database mount standby database
released channel: dup1
released channel: dup2
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 10/02/2008 13:01:43
RMAN-03015: error occurred in stored script Memory Script
RMAN-03009: failure of sql command on clone_default channel at 10/02/2008 13:01:43
RMAN-11003: failure during parse/execution of SQL statement: alter database mount standby database
*ORA-00201: control file version 10.2.0.1.0 incompatible with ORACLE version 10.2.0.0.0*
ORA-00202: control file: 'D:\ORACLE\PRODUCT\10.2.0\DB_1\DATABASE\CTL1STANDBY.ORA'Why i am getting this Incomaptable Control File error inspite of Backing up the control File.....
Regards,
Prosenjit Mukherjee

Check the value for the parameter "COMPATIBLE" in the source and standby database instance parameter files.
"COMPATIBLE" should be the same.
See http://download.oracle.com/docs/cd/B19306_01/server.102/b14239/create_ps.htm#i70517
"... ensure the COMPATIBLE initialization parameter is set to the same value on both the primary and standby databases"
Edited by: Hemant K Chitale on Oct 2, 2008 4:09 PM
Added link and quote from 10g doc

ORA-12560 while creating database Oracle 11.1.0.6

Hi,
I tried to create a Oracle Database using Oracle installer.
I got the error ORA-12560
This is part of the logfile:
INFO: Configuration assistant "Oracle Net Configuration Assistant" succeeded
INFO: Command = oracle.assistants.server.DbcaCfgPlugIn C:\Windows\system32\cmd /c call E:\app\Administrator\product\11.1.0\db_1/bin/dbca.bat -progress_only -createDatabase -templateName General_Purpose.dbc -sid labor -gdbName labor.world -emConfiguration LOCAL -datafileJarLocation E:\app\Administrator\product\11.1.0\db_1\assistants\dbca\templates -datafileDestination E:\app\Administrator\oradata -responseFile NO_VALUE -characterset WE8MSWIN1252 -obfuscatedPasswords false -sampleSchema true -recoveryAreaDestination NO_VALUE -totalMemory 818 -automaticMemoryManagement true -maskPasswords false -sysPassword ${S_SYSPASS} -systemPassword ${S_SYSTEMPASS} -dbsnmpPassword ${S_DBSNMPPASS} -sysmanPassword ${S_SYSMANPASS} ${S_SYSASMPASS} ${S_HOSTUSERPASS}
Command = oracle.assistants.server.DbcaCfgPlugIn has failed
INFO: Configuration assistant "Oracle Database Configuration Assistant" failed
*** Starting OUICA ***
Oracle Home set to E:\app\Administrator\product\11.1.0\db_1
Configuration directory is set to E:\app\Administrator\product\11.1.0\db_1\cfgtoollogs. All xml files under the directory will be processed
INFO: The "E:\app\Administrator\product\11.1.0\db_1\cfgtoollogs\configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
INFO:
The Runconfig command constructed is E:\app\Administrator\product\11.1.0\db_1\oui\bin\runConfig.bat ORACLE_HOME=E:\app\Administrator\product\11.1.0\db_1 MODE=perform ACTION=configure RERUN=false $*
INFO: Since there is an Internal Plugin Invocation or a Java Plugin Invocation tool in the Oracle Home E:\app\Administrator\product\11.1.0\db_1 we use the runConfig Command instead of the plugin's command
INFO: Created a new file E:\app\Administrator\product\11.1.0\db_1\cfgtoollogs\configToolFailedCommands
INFO: Since the option is to overwrite the existing E:\app\Administrator\product\11.1.0\db_1\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is E:\app\Administrator\product\11.1.0\db_1\cfgtoollogs\configToolFailedCommands.bak
SEVERE: OUI-25031:Some of the configuration assistants failed/cancelled. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK
Can anybody help me
Operating system Windows Server 2008
Regards
siegwiin

Good morning Siegwin,
First, you should probably post to this forum: [Database - General|http://forums.oracle.com/forums/forum.jspa?forumID=61]
However, the error you are getting is a TNS error. You should check the following information in your TNSNAMES.ORA on your system and on the Database Server.
<li>Name of the database
<li>Port Number of the database as defined in the TNSNAMES - compare against the port number that the database is actually listening on
<li>The SID defined in the TNSNAMES file.
On the Database Server:
<li>Check that there is a listener running and that it is listening for your database.
Don.
REWARDS: Please remember to mark helpful or correct posts on the forum, not just for my answers but for everyone! :)

ORA-12560 while installing database 11g

Hi,
I tried to create a Oracle Database using Oracle installer.
I got the error ORA-12560
This is part of the logfile:
INFO: Configuration assistant "Oracle Net Configuration Assistant" succeeded
INFO: Command = oracle.assistants.server.DbcaCfgPlugIn C:\Windows\system32\cmd /c call E:\app\Administrator\product\11.1.0\db_1/bin/dbca.bat -progress_only -createDatabase -templateName General_Purpose.dbc -sid labor -gdbName labor.world -emConfiguration LOCAL -datafileJarLocation E:\app\Administrator\product\11.1.0\db_1\assistants\dbca\templates -datafileDestination E:\app\Administrator\oradata -responseFile NO_VALUE -characterset WE8MSWIN1252 -obfuscatedPasswords false -sampleSchema true -recoveryAreaDestination NO_VALUE -totalMemory 818 -automaticMemoryManagement true -maskPasswords false -sysPassword ${S_SYSPASS} -systemPassword ${S_SYSTEMPASS} -dbsnmpPassword ${S_DBSNMPPASS} -sysmanPassword ${S_SYSMANPASS} ${S_SYSASMPASS} ${S_HOSTUSERPASS}
Command = oracle.assistants.server.DbcaCfgPlugIn has failed
INFO: Configuration assistant "Oracle Database Configuration Assistant" failed
*** Starting OUICA ***
Oracle Home set to E:\app\Administrator\product\11.1.0\db_1
Configuration directory is set to E:\app\Administrator\product\11.1.0\db_1\cfgtoollogs. All xml files under the directory will be processed
INFO: The "E:\app\Administrator\product\11.1.0\db_1\cfgtoollogs\configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
INFO:
The Runconfig command constructed is E:\app\Administrator\product\11.1.0\db_1\oui\bin\runConfig.bat ORACLE_HOME=E:\app\Administrator\product\11.1.0\db_1 MODE=perform ACTION=configure RERUN=false $*
INFO: Since there is an Internal Plugin Invocation or a Java Plugin Invocation tool in the Oracle Home E:\app\Administrator\product\11.1.0\db_1 we use the runConfig Command instead of the plugin's command
INFO: Created a new file E:\app\Administrator\product\11.1.0\db_1\cfgtoollogs\configToolFailedCommands
INFO: Since the option is to overwrite the existing E:\app\Administrator\product\11.1.0\db_1\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is E:\app\Administrator\product\11.1.0\db_1\cfgtoollogs\configToolFailedCommands.bak
SEVERE: OUI-25031:Some of the configuration assistants failed/cancelled. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK
Can anybody help me
Operating system Windows Server 2008
Regards
siegwiin

And you also read this?
To install, use Oracle Database 11gR1 Release 1 (11.1.0.7.0) for Microsoft Windows 2008 Server. Do not install with the 11.1.0.6.0 version.
PS: To get better advice, don't post a marketing label like 11g only. post the full version you're trying to install.
Werner

ORA-01000 while EXPORT DATABASE - 1.5.1 MAIN 5440

I am using the following version of Sql Developer
Oracle SQL Developer 1.5.1
Version 1.5.1
Build MAIN-5440
IDE Version: 11.1.1.0.22.49.42
Product ID: oracle.sqldeveloper
Product Version: 11.1.1.54.40
I tried to export a database to a file but I got the following error:
ORA-01000 - maximum open cursors exceeded
and SQL Developer hungs on.
Is it a known bug ?

user3873926,
Use the following query to see which cursors are open and once all of the cursors are closed, then try to export the database again.
select * from v$parameter
where name = 'open_cursors'

ORA-12560 while installing database 11g 11..1.0.7.0 on Windows 2008 server

This started with an install of Oracle Financials that failed and led me to the discovery that I can't even install a generic database on this machine, the two issues are certainly related.
Why would I get this failure on a clean install???
Is there a problem with the computer being a domain controler or called Sampson-II ?
Thanks in advance.

Hardware Xeon processor 8 G of memory
Runing db as 32 byte
Software Windows server 2008 SP2
I'm not seeing any conflict with other prerequisites or tasks that need to be executed before the install is done.
The listener installs but when the database is to be installed, it fails.
Below is the install log. Your assistance is greatly appreciated.
INFO: This variable varSelect is not added to the global context map
INFO: This variable s_dbcaClasspath is not added to the global context map
INFO: This variable s_odmaClasspath is not added to the global context map
INFO: This variable PROD_HOME is not added to the global context map
INFO: ORACLE_HOME is not settable, hence not setting the value
INFO: Handling the storing of variables for aggr name oracle.sysman.console.db
INFO: This variable s_sid is not added to the global context map
INFO: This variable s_serverInstallType is not added to the global context map
INFO: This variable s_platform is not added to the global context map
INFO: HashMap added with the key oracle.sysman.console.db and an empty variable Vector
INFO: Adding the variable s_obfOc4jAdmPasswd to the aggregate oracle.sysman.console.db
INFO: Adding the variable s_obfOc4jAdmPasswd to the global context map for the aggregate oracle.sysman.console.db
INFO: Adding the variable s_obfJtaAdmPasswd to the aggregate oracle.sysman.console.db
INFO: Adding the variable s_obfJtaAdmPasswd to the global context map for the aggregate oracle.sysman.console.db
INFO: This variable s_nlsLang is not added to the global context map
INFO: This variable s_emailServer is not added to the global context map
INFO: This variable s_emailAddress is not added to the global context map
INFO: This variable s_cfgtyperet is not added to the global context map
INFO: Adding the variable s_JtaAdmPasswd to the aggregate oracle.sysman.console.db
INFO: Adding the variable s_JtaAdmPasswd to the global context map for the aggregate oracle.sysman.console.db
INFO: This variable n_uploadInterval is not added to the global context map
INFO: This variable localhost is not added to the global context map
INFO: This variable b_launchTools is not added to the global context map
INFO: This variable b_launchBrowser is not added to the global context map
INFO: This variable b_isUNIX is not added to the global context map
INFO: This variable b_centralConsole is not added to the global context map
INFO: This variable USE_HTTP_PROXY is not added to the global context map
INFO: This variable USE_DB_CONSOLE is not added to the global context map
INFO: This variable SET_CONSOLE_MODE is not added to the global context map
INFO: This variable SA_SETUP is not added to the global context map
INFO: This variable OC4JLOC is not added to the global context map
INFO: This variable NO_PC_MODE is not added to the global context map
INFO: This variable LOGGING_LEVEL is not added to the global context map
INFO: This variable JRE_HOME is not added to the global context map
INFO: This variable ISQLPLUS_PROTOCOL is not added to the global context map
INFO: This variable ISQLPLUS_PORT is not added to the global context map
INFO: This variable HOST_SID_OFFSET_ENABLED is not added to the global context map
INFO: This variable HOSTNAME is not added to the global context map
INFO: This variable EM_UPLOAD_DISABLE is not added to the global context map
INFO: This variable EM_UIX_DEBUG_FLAG is not added to the global context map
INFO: This variable EMPRODVER is not added to the global context map
INFO: This variable CONSOLE_MODE is not added to the global context map
INFO: This variable CONSOLE_CFG is not added to the global context map
INFO: This variable sl_oraclehomes is not added to the global context map
INFO: This variable s_oc4jDir is not added to the global context map
INFO: This variable s_oc4jAppsDir is not added to the global context map
INFO: This variable s_jreHome is not added to the global context map
INFO: This variable s_configcommand is not added to the global context map
INFO: This variable b_isRAC is not added to the global context map
INFO: This variable b_UNIX is not added to the global context map
INFO: This variable OJSP_JAR_LOC is not added to the global context map
INFO: This variable OJSPUTIL_JAR_LOC is not added to the global context map
INFO: This variable LDAP_JAR_LOC is not added to the global context map
INFO: This variable JAVA_HOME is not added to the global context map
INFO: This variable ISQLPLUS_HOST is not added to the global context map
INFO: This variable EM_UIX_LOCATION is not added to the global context map
INFO: This variable EM_REPOS_HOST is not added to the global context map
INFO: This variable EM_PING_COMMAND is not added to the global context map
INFO: This variable EM_OC4J_HOME is not added to the global context map
INFO: This variable EM_EAR_LOC is not added to the global context map
INFO: This variable EMDROOT is not added to the global context map
INFO: Adding the variable s_oc4jAdmPasswd to the aggregate oracle.sysman.console.db
INFO: Adding the variable s_oc4jAdmPasswd to the global context map for the aggregate oracle.sysman.console.db
INFO: This variable s_launchBrowserClasspath is not added to the global context map
INFO: This variable s_javapOracleHome is not added to the global context map
INFO: This variable PROD_HOME is not added to the global context map
INFO: {Parameter:TOPLEVEL_COMPONENT in {Aggregate:OuiConfigVariables:1.0.0.0.0:common}}: Parameter data type is not compatible with the provided String Array.
INFO: passing params to cf done
INFO: done saving info by cf
INFO: This is a shared oracle home or remote nodes are null. No copy required.
INFO: cf session retrieved for key: OraDb11g_home1 oracle.server
INFO: cf session retrieved for key: OraDb11g_home1 oracle.server
INFO: cf session retrieved for key: OraDb11g_home1 oracle.server
INFO: Since there is an Internal Plugin Invocation or a Java Plugin Invocation tool in the OracleHome E:\app\Administrator\product\11.1.0\db_1 we use the runConfig Command instead of the plugin's command
INFO:
The Runconfig command constructed is E:\app\Administrator\product\11.1.0\db_1\oui\bin\runConfig.bat ORACLE_HOME=E:\app\Administrator\product\11.1.0\db_1 MODE=perform ACTION=configure RERUN=true $*
INFO: The runConfig command is
E:\app\Administrator\product\11.1.0\db_1\oui\bin\runConfig.bat ORACLE_HOME=E:\app\Administrator\product\11.1.0\db_1 MODE=perform ACTION=configure RERUN=true $*
INFO: Created a new file E:\app\Administrator\product\11.1.0\db_1\cfgtoollogs\configToolAllCommands
INFO: Since the option is to overwrite the existing E:\app\Administrator\product\11.1.0\db_1\cfgtoollogs\configToolAllCommands file, backing it up
INFO: The backed up file name is E:\app\Administrator\product\11.1.0\db_1\cfgtoollogs\configToolAllCommands.bak
INFO: RUN_RECOMMENDED_TOOLS FIRST is set to false
INFO: No of Recommended Tools3
INFO: plugin-list is created
INFO: pluginlist is updated for: Oracle Database 11g current size: 1
INFO: No of ExitOnly Tools in this session: 1
INFO: cf session for perform has hashcode: 20767108
INFO: detached tool list getting prepared fo comp: Oracle Database 11g
INFO: cfsession hashcode for exit only tools: 20767108
INFO: hashcode for action: 11062616
INFO: No of ExitOnly Tools: 1
INFO: exit-tool: Launch browser
INFO: saving exit only tools ...
INFO: no detached only tools in this session
INFO: exit-only tools are created in single installation
INFO: no. of sets of tools to be run: 1
INFO: ca page to be shown: true
INFO: exitonly tools to be excuted passed: 1
INFO: Starting to execute configuration assistants
INFO: Command = C:\Windows\system32\cmd /c call E:\app\Administrator\product\11.1.0\db_1/bin/netca.bat /orahome E:\app\Administrator\product\11.1.0\db_1 /orahnam OraDb11g_home1 /instype typical /inscomp client,oraclenet,javavm,server,ano /insprtcl tcp,nmp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile E:\app\Administrator\product\11.1.0\db_1\network\install\netca_typ.rsp
Parsing command line arguments:
Parameter "orahome" = E:\app\Administrator\product\11.1.0\db_1
Parameter "orahnam" = OraDb11g_home1
Parameter "instype" = typical
Parameter "inscomp" = client,oraclenet,javavm,server,ano
Parameter "insprtcl" = tcp,nmp
Parameter "cfg" = local
Parameter "authadp" = NO_VALUE
Parameter "nodeinfo" = NO_VALUE
Parameter "responsefile" = E:\app\Administrator\product\11.1.0\db_1\network\install\netca_typ.rsp
Done parsing command line arguments.
Oracle Net Services Configuration:
Profile configuration complete.
Listener started at port:1521
Oracle Net Listener Startup:
Running Listener Control:
E:\app\Administrator\product\11.1.0\db_1\bin\lsnrctl start LISTENER
Listener Control complete.
Listener started successfully.
Setting Listener service to start automatically.
Listener configuration complete.
Oracle Net Services configuration successful. The exit code is 0
INFO: Configuration assistant "Oracle Net Configuration Assistant" succeeded
INFO: Command = oracle.assistants.server.DbcaCfgPlugIn C:\Windows\system32\cmd /c call E:\app\Administrator\product\11.1.0\db_1/bin/dbca.bat -progress_only -createDatabase -templateName General_Purpose.dbc -sid orcl -gdbName orcl -emConfiguration LOCAL -datafileJarLocation E:\app\Administrator\product\11.1.0\db_1\assistants\dbca\templates -datafileDestination E:\app\Administrator\oradata -responseFile NO_VALUE -characterset WE8MSWIN1252 -obfuscatedPasswords false -sampleSchema true -recoveryAreaDestination NO_VALUE -totalMemory 1638 -automaticMemoryManagement true -maskPasswords false -sysPassword ${S_SYSPASS} -systemPassword ${S_SYSTEMPASS} -dbsnmpPassword ${S_DBSNMPPASS} -sysmanPassword ${S_SYSMANPASS} ${S_SYSASMPASS} ${S_HOSTUSERPASS}
Command = oracle.assistants.server.DbcaCfgPlugIn has failed
INFO: Configuration assistant "Oracle Database Configuration Assistant" failed
*** Starting OUICA ***
Oracle Home set to E:\app\Administrator\product\11.1.0\db_1
Configuration directory is set to E:\app\Administrator\product\11.1.0\db_1\cfgtoollogs. All xml files under the directory will be processed
INFO: The "E:\app\Administrator\product\11.1.0\db_1\cfgtoollogs\configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
INFO:
The Runconfig command constructed is E:\app\Administrator\product\11.1.0\db_1\oui\bin\runConfig.bat ORACLE_HOME=E:\app\Administrator\product\11.1.0\db_1 MODE=perform ACTION=configure RERUN=false $*
INFO: Since there is an Internal Plugin Invocation or a Java Plugin Invocation tool in the Oracle Home E:\app\Administrator\product\11.1.0\db_1 we use the runConfig Command instead of the plugin's command
INFO: Created a new file E:\app\Administrator\product\11.1.0\db_1\cfgtoollogs\configToolFailedCommands
INFO: Since the option is to overwrite the existing E:\app\Administrator\product\11.1.0\db_1\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is E:\app\Administrator\product\11.1.0\db_1\cfgtoollogs\configToolFailedCommands.bak
SEVERE: OUI-25031:Some of the configuration assistants failed/cancelled. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK
INFO: --------------------------------------
INFO: The "E:\app\Administrator\product\11.1.0\db_1\cfgtoollogs\configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
INFO: The "E:\app\Administrator\product\11.1.0\db_1\cfgtoollogs\configToolAllCommands" script contains all commands to be executed by the configuration assistants. This file may be used to run the configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
INFO:
The Runconfig command constructed is E:\app\Administrator\product\11.1.0\db_1\oui\bin\runConfig.bat ORACLE_HOME=E:\app\Administrator\product\11.1.0\db_1 MODE=perform ACTION=configure RERUN=false $*
INFO: Since there is an Internal Plugin Invocation or a Java Plugin Invocation tool in the Oracle Home E:\app\Administrator\product\11.1.0\db_1 we use the runConfig Command instead of the plugin's command
INFO: Since the option is to overwrite the existing E:\app\Administrator\product\11.1.0\db_1\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is E:\app\Administrator\product\11.1.0\db_1\cfgtoollogs\configToolFailedCommands.bak.1
SEVERE: OUI-25029:One or more "Recommended" configuration assistants have not completed successfully. Not successfully running any "Recommended" assistant means your system will not be correctly configured.
INFO: User Selected: Yes/OK
WARNING: Do you really want to exit?
INFO: User Selected: Yes/OK
INFO:
*** End of Installation Page***
INFO: The OUICA command is launched from E:\app\Administrator\product\11.1.0\db_1\oui\bin\ouica.bat.
The installation of Oracle Database 11g was successful, but some configuration assistants failed, were cancelled or skipped.

ORA-01092 error while upgrading database from 9.2.0.6 to 10.2.0.1

Hi ,
Am getting ORA-01092 error while upgrading database to 10.2.0.1 from 9.2.0.6
I executed the catupgrd.sql successfully and recompiled invaild objects.
After that i tried to startup the database,but am getting the error:
sql>startup
oracle instance started
database mounted
ORA-01092 : Oracle instance terminated. Disconnection forced
I checked alert log file.
I am getting the following errors
Errors in file /u01/......./udump/VIS_ora/7179.trc
ORA-00604: error occurred at recursive SQL level 1
ORA-00607: internal error occurred while making change to a datablock
ORA-00600: internal error code, arguments [4194],[70] ,[39] [ ] []
Error 604 happened during database open . Shutting down database
instance terminated by USER pid =7179
ORA-01092 error Signaled during alter database open
Is there any block corruption? could u please share the solution for these errors?

Hi;
You are hitting ORA-00600: error which mean you may need to work oracle support for your issue.Pelase check below note if its not help i suggest rise sr
Troubleshoot an ORA-600 or ORA-7445 Error Using the Error Lookup Tool [ID 153788.1]
Regard
Helios

Error while creating database manually

hi guru's i am getting error while creating database manually
my sql is SQL>create database lily
logfile   group 1 ('C:\oracle\product\10.2.0\oradata\lily\redo1.log') size 10M,
            group 2 ('C:\oracle\product\10.2.0\oradata\lily\redo2.log') size 10M,
            group 3 ('C:\oracle\product\10.2.0\oradata\lily\redo3.log') size 10M
character set          WE8ISO8859P1
national character set utf8
datafile 'C:\oracle\product\10.2.0\oradata\lily\system.dbf'
            size 50M
            autoextend on
            next 10M maxsize unlimited
            extent management local
sysaux datafile 'C:\oracle\product\10.2.0\oradata\lily\sysaux.dbf'
            size 10M
            autoextend on
            next 10M
            maxsize unlimited
undo tablespace undo
            datafile 'C:\oracle\product\10.2.0\oradata\lily\undo.dbf'
            size 10M
default temporary tablespace temp
            tempfile 'C:\oracle\product\10.2.0\oradata\lily\temp.dbf'
            size 10M;and i am getting following error
create database lily
ERROR at line 1:
ORA-01501: CREATE DATABASE failed
ORA-00200: control file could not be created
ORA-00202: control file: 'C:\ORACLE\PRODUCT\10.2.0\ORADATA\LILY\CONTROL01.CTL'
ORA-27038: created file already exists
OSD-04010: <create> option specified, file already exists
code}
Edited by: CHETAN YADAV on Jul 19, 2011 6:55 PM

create database lily
logfile   group 1 ('C:\oracle\product\10.2.0\oradata\lily\redo1.log') size 10M,
          group 2 ('C:\oracle\product\10.2.0\oradata\lily\redo2.log') size 10M,
            group 3 ('C:\oracle\product\10.2.0\oradata\lily\redo3.log') size 10M
datafile 'C:\oracle\product\10.2.0\oradata\lily\system.dbf' size 150M
sysaux datafile 'C:\oracle\product\10.2.0\oradata\lily\sysaux.dbf' 150 M
undo tablespace undo datafile 'C:\oracle\product\10.2.0\oradata\lily\undo.dbf' size 10M
default temporary tablespace temp tempfile 'C:\oracle\product\10.2.0\oradata\lily\temp.dbf' size 10M;
remove the SQL> from the a.sql script also change the system datafile size to minimum of 100mb size
ALSO check/change the undotablespace name with your init parameter file it should match as it is in the init parameter file
Edited by: rajeysh on Jul 19, 2011 6:59 PM

Error while creating database on 10.2 enterprise eidition

Hi,
When i trying to create database through batch file on oracle version 10.2 enterprise edition, its giving error.
ORA-01092: ORACLE instance terminated. Disconnection forced
Following error message logged in log file:
ORA-00604: error occurred at recursive SQL level 2
ORA-00942: table or view does not exist
Offending statement at line 7032
create unique index apply$_conf_hdlr_columns_unq1
on apply$_conf_hdlr_columns(object_number, column_name)
ORA-01501: CREATE DATABASE failed
ORA-01519: error while processing file '%ORACLE_HOME%\RDBMS\ADMIN\SQL.BSQ' near line 7032
ORA-00604: error occurred at recursive SQL level 2
ORA-00942: table or view does not exist
The same script is working fine on Oracle 10.1 Enterprise edition But its giving error on Oracle 10.2 Enterprise edition while creating database.
Please help.
Thanks in advance

Hi,
Content of PFILE:
# Basic Initialization Parameters
cluster_database=false
compatible=10.1.0.2.0
control_files = ("F:/oracle/oradata/DTO/ctrl01.ctl", "F:/oracle/oradata/DTO/ctrl02.ctl")
db_block_size=8192
# db_create_file_dest               # only used in OMF mode
# db_create_online_log_dest_n          # only used in OMF mode
db_domain=""
db_name=DTO
db_recovery_file_dest=F:/oracle/oradata/DTO/flash_recovery_area
db_recovery_file_dest_size=2G
db_unique_name=DTO_01
# instance_number               # RAC parameter
job_queue_processes=10
# log_archive_dest_n               # NOARCHIVELOG mode
# log_archive_dest_state_n          # NOARCHIVELOG mode
# nls_language                    # OS dependant
# nls_territory                    # OS dependant
open_cursors=50
pga_aggregate_target=10M
processes=50
# remote_listener               # RAC parameter
remote_login_passwordfile=EXCLUSIVE
# rollback_segments               # UNDO_MANAGEMENT mode
# sessions                    # derived from processes
sga_target=100M
shared_servers=0
star_transformation_enabled=FALSE
undo_management=AUTO
# undo_tablespace               # first UNDO tablespace
# Other Parameters
background_dump_dest=F:/oracle/admin/DTO/bdump
core_dump_dest=F:/oracle/admin/DTO/cdump
cursor_sharing=SIMILAR
db_file_multiblock_read_count=64
db_files=400
db_writer_processes=2
instance_name=DTO
log_buffer = 8192
log_checkpoint_interval = 10000
log_checkpoint_timeout = 0
os_authent_prefix=""
service_names=DTO
statistics_level=typical
timed_statistics=true
user_dump_dest=F:/oracle/admin/DTO/udump
utl_file_dir=*
Command in batch script:
CONNECT sys/oracle AS SYSDBA
STARTUP NOMOUNT PFILE=&ADMN_DIR/pfile/init&ORA_INST..ora
CREATE DATABASE &ORA_INST
     CONTROLFILE REUSE
     LOGFILE
          GROUP 1 ('&REDO_DIR_1/redo11.log','&REDO_DIR_2/redo12.log') SIZE 10M REUSE,
          GROUP 2 ('&REDO_DIR_1/redo21.log','&REDO_DIR_2/redo22.log') SIZE 10M REUSE,
          GROUP 3 ('&REDO_DIR_1/redo31.log','&REDO_DIR_2/redo32.log') SIZE 10M REUSE,
          GROUP 4 ('&REDO_DIR_1/redo41.log','&REDO_DIR_2/redo42.log') SIZE 10M REUSE
     DATAFILE
          '&DATA_DIR/syst01.dbf' SIZE 40M REUSE AUTOEXTEND ON NEXT 40M MAXSIZE 2G
          EXTENT MANAGEMENT LOCAL
     SYSAUX DATAFILE
          '&DATA_DIR/saux01.dbf' SIZE 40M REUSE AUTOEXTEND ON NEXT 40M MAXSIZE 2G
     DEFAULT TEMPORARY TABLESPACE temp
          TEMPFILE '&TEMP_DIR/temp01.dbf' SIZE 20M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 2G
          EXTENT MANAGEMENT LOCAL UNIFORM SIZE 10M
     UNDO TABLESPACE undo
          DATAFILE '&UNDO_DIR/undo01.dbf' SIZE 20M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 2G,
               '&UNDO_DIR/undo02.dbf' SIZE 20M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 2G
     CHARACTER SET AL32UTF8
     SET TIME_ZONE = 'Europe/Warsaw';

Creating a duplicated database from active database

I'm having problem trying to duplicate a database from a target database (PROD) to the auxiliary one (AUX).
This is what I've configured:
listener.ora
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (GLOBAL_DBNAME = PROD)
      (ORACLE_HOME = /u01/app/oracle/product/11.2.0/db_1/)
      (SID_NAME = PROD)
    (SID_DESC =
      (GLOBAL_DBNAME = AUX)
      (ORACLE_HOME = /u01/app/oracle/product/11.2.0/db_1/)
      (SID_NAME = AUX)
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = my_ip)(PORT = 1521))
ADR_BASE_LISTENER = /u01/app/oracletnsnames.ora
AUX =
(DESCRIPTION =
    (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = my_ip)(PORT = 1521)))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = AUX)
PROD =
(DESCRIPTION =
    (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = my_ip)(PORT = 1521)))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = PROD)
)/u01/app/oracle/product/11.2.0/db_1/dbs/initAUX.ora
db_name='AUX'
cp /u01/app/oracle/product/11.2.0/db_1/dbs/orapwPROD /u01/app/oracle/product/11.2.0/db_1/dbs/orapwAUX- Started PROD database (open and in archive log mode)
- Started AUX database (in nomount mode and usinf pfile='/u01/app/oracle/product/11.2.0/db_1/dbs/initAUX.ora')
But when I issue the following command I get connected to auxiliary database (not started) :
rman target sys/oracle@PROD auxiliary sys/oracle@AUX
connected to target database: PROD (DBID=196032563)
connected to auxiliary database (not started)And executing the duplicate command it returns:
RMAN> duplicate target database to AUX from active database spfile parameter_value_convert '/DATA/PROD/','+DG_DATA_AUX' set db_create_file_dest='+DG_DATA_AUX';
Starting Duplicate Db at 2010-09-28:13:36:50
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 09/28/2010 13:36:50
RMAN-06403: could not obtain a fully authorized session
RMAN-04006: error from auxiliary database: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directorylsnrctl stopped and restarted several times. This is the output of lsnrctl status command:
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 28-SEP-2010 13:45:14
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=my_ip)(PORT=1521)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date                28-SEP-2010 12:44:50
Uptime                    0 days 0 hr. 1 min. 22 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   /u01/app/oracle/product/11.2.0/db_1/network/admin/listener.ora
Listener Log File         /u01/app/oracle/diag/tnslsnr/my_ip/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=my_ip)(PORT=1521)))
Services Summary...
Service "PROD" has 1 instance(s).
Instance "PROD", status READY, has 1 handler(s) for this service...
Service "PRODXDB" has 1 instance(s).
Instance "PROD", status READY, has 1 handler(s) for this service...
Service "AUX" has 2 instance(s).
Instance "AUX", status UNKNOWN, has 1 handler(s) for this service...
Instance "AUX", status BLOCKED, has 1 handler(s) for this service...
The command completed successfullyI have already created a duplicated database from a backup of the target one and the configuration was quite the same: the differences are that using active database duplication I needed to use orapw files (and they need to have the same password) and that I needed to connect using Oracle Net service name to connect to the auxiliary instance.. otherwise I got:
export ORACLE_SID=AUX
rman target sys/oracle@PROD auxiliary sys/oracle
connected to target database: PROD (DBID=196032563)
connected to auxiliary database: AUX (not mounted)
RMAN> duplicate target database to AUX from active database spfile parameter_value_convert '/DATA/PROD/','+DG_DATA_AUX' set db_create_file_dest='+DG_DATA_AUX';
Starting Duplicate Db at 2010-09-28:12:27:21
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 09/28/2010 12:27:21
RMAN-06217: not connected to auxiliary database with a net service nameWhere am I wrong?

Thanks for your support. My instance was and is still in nomount mode. But I'm not able to connect this instance as auxiliary and in the right expected mode:
connected to auxiliary database: AUX (not mounted)
[oracle@my_ip oracle]$ env|grep SID
ORACLE_SID=AUX
[oracle@my_ip oracle]$ sqlplus / as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Wed Sep 29 10:28:44 2010
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
idle> shutdown immediate
ORA-01507: database not mounted
ORACLE instance shut down.
idle> startup nomount pfile=/u01/app/oracle/product/11.2.0/db_1/dbs/initAUX.ora
ORACLE instance started.
Total System Global Area 217157632 bytes
Fixed Size                  2211928 bytes
Variable Size             159387560 bytes
Database Buffers           50331648 bytes
Redo Buffers                5226496 bytes

Error ORA-02375 while trying to export/import JTF.JTF_PF_REPOSITORY table

We have already created an SR, In the mean time, trying to see whether anyone else has come across this issue. Thanks.
On : 11.2.0.3 version, Data Pump Import
Error ORA-02375 while trying to import JTF.JTF_PF_REPOSITORY table
We are getting the below error while performing the full db
import.
ORA-02375: conversion error loading table
"JTF"."JTF_PF_REPOSITORY" partition "EBIZ"
ORA-22337: the type of accessed
object has been evolved
ORA-02372: data for row: SYS_NC00040$ :
0X'8801FE000004AD0313FFFF0009198401190A434F4E4E454354'
This issue is
stopping our upgrade of database from 10.2.0.4 to 11.2.0.3. This is very
critical for us to be resolved.

Hi,
seems this is Character set issue fo source and Target DB check this doc:Unable to Export Table WF_ITEM_ATTRIBUTE_VALUES due to errors ORA-02374, ORA-22337, and ORA-02372 (Doc ID 1522761.1)
HTH

Erro while creating Database in 9i

I ve Installed Oracle 9i in Windows xp in Pentium 4 m/c while creating database its giving the following Error
java.io.FileNotFoundException:c:\oracle\oraServer\admin\DEVPOS\pfile\init.ora
Please Provide solution

Did you checked if the pfile is at this location and has the same name?
Regards
Demetrios

ORA-19690 while Duplicating database

Similar Messages

Maybe you are looking for