ORA-20001: Maximum number of email messages per workspace exceeded
Greetings. We are running APEX 4.1.1. I have an application where we have to send out email messages to a list of emails. Currently there are 2469 email addresses. Originally we put the email addresses in the BCC but we received an error that we had exceeded the size limit of the BCC. So we modified our procedure to send one email at a time, in a loop.
Now we are receiving the following error message:
"ORA-20001: You have exceeded the maximum number of email messages per workspace"
Has anyone else run into this issue? What is maximum number or email messages per workspace? Is it a limit per day, per session?
We have not added emails to this table since last year, so the maximum number of email messages allowed may have changed recently?
I did find this Forum post that addressed the issue but no one responded:
How many mails i can send at a time per day using APEX mail system?
Thanks,
John
Hi jfosteroracle,
You are getting the error may be the following reason,
Check the following,
Login as ADMIN and Goto -->Manage Instance-->Instance Settings--> Mail-->Maximum Emails per workspace
Actually this number denotes the Number of mails can be sent per 24 hour for the workspace,It may exceeded.
It may be the reason.
Thank you.
Regards,
Gurujothi
Edited by: Gurujothi on Jun 27, 2012 5:54 AM
Similar Messages
-
Maximum number of email addresses per user
I have a need to create a single mailbox with a large number of alias email addresses. I cannot find documentation on the maximum number of SMTP addresses that can be associated with a single user. Can someone point me in the right direction. Many thanks
in advance!
DavidHi David,
I've never heard of any restrictions about this, however, base on my search, I find a similar thread mentioned this question for your reference:
https://social.technet.microsoft.com/Forums/office/en-US/2c167213-731d-439f-855e-2dcb1ffd1d31/maximum-number-of-email-addresses-per-user-exchange-2010-sp1?forum=exchangesvradminlegacy
One member said:
I could see one account with 1203 SMTP addresses. I cannot add more addresses, I get an error message when I try to add more. Maybe it is the limit. I´m still researching to be sure if it is a limit or not.The exchange is 2007.
Best regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Niko Cheng
TechNet Community Support -
Maximum number of email messages displayed in Mailbox?
Is 200 the maximum number of email messages you can display in any given Mailbox? I am trying to view an old email that was sent approx 3 months ago, which puts it about 600 or 700 email messages down in my Inbox. Hitting the "Load 50 More Messages" link doesn't appear to do anything if you already have 200 messages displayed in the Mailbox.
Forgot to mention that I am using a .Mac email account....
-
Since yesterday I'm unable to send emails on any of my Apple devices. The revert is that I have exceeded the maximum number of emails per day, but I had only sent out 24 with no bulk emailing - (much less than 1000 recipients as per the website) and I'm STILL not able to send emails. Any advice on how to solve this?
I have asked a moderator to provide assistance, they will post an invite on this thread.
Once you get a reply, if you click on their name, you will see a screen like this. Click on the link as shown below.
Please do not send them a personal message, as they may not be on duty for a long time, and your message will not be tracked properly.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones. -
Db server doesn't start. Error message: ORA-00020: maximum number of proces
After I changed the parameter from archive log mode. My db server is having problems.
I can't log in as sys using sqlplus. when I log in through sqlplus /nolog, and tried to shut down, here is the error message:
$ sqlplus /nolog
SQL*Plus: Release 10.1.0.3.0 - Production on Mon Apr 23 11:43:07 2007
Copyright (c) 1982, 2004, Oracle. All rights reserved.
SQL> connect / as sysdba
Connected to an idle instance.
SQL> shutdown immediate
ORA-24324: service handle not initialized
ORA-24323: value not allowed
ORA-00020: maximum number of processes (%s) exceeded
SQL>
I am stuck on this. i have changed the value of processes in init.ora, but this error still exists. i think I need to do: create spfile from pfile='init.ora', but I need to log in to do, but I can't log in sys.
Please help.
Thanks.i forgot shutdown abort. used that, created spfile from pfile, and it works ok now.
-
Java.lang.Exception: ORA-00020: maximum number of processes (150) exceeded?
When i run my web-application with the embedded OC4J server, the following error message is prompted:
java.lang.Exception: ORA-00020: maximum number of processes (150) exceeded
void MyFolder.objects.MyObject.<init>(oracle.jbo.ApplicationModule, java.lang.String, java.lang.String, javax.servlet.http.HttpServletRequest)
void MyFolder.servlet.MyServlet.doPost(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
void javax.servlet.http.HttpServlet.service(com.evermind.server.http.EvermindHttpServletRequest, com.evermind.server.http.EvermindHttpServletResponse)
void javax.servlet.http.HttpServlet.service(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
void javax.servlet.http.HttpServlet.service(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
void com.evermind.server.http.ServletRequestDispatcher.invoke(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
void com.evermind.server.http.ServletRequestDispatcher.forwardInternal(javax.servlet.ServletRequest, javax.servlet.http.HttpServletResponse)
boolean com.evermind.server.http.HttpRequestHandler.processRequest(com.evermind.server.ApplicationServerThread, com.evermind.server.http.EvermindHttpServletRequest, com.evermind.server.http.EvermindHttpServletResponse, java.io.InputStream, java.io.OutputStream, boolean)
void com.evermind.server.http.HttpRequestHandler.run(java.lang.Thread)
void com.evermind.util.ThreadPoolThread.run()
Question:
- What is the cause of this error message? How to avoid?
- I intended to deploy my application to 9IAS server. Will the same problem occurs too?
Thanks for your reply!Hi Pig,
When i run my web-application with the embedded OC4J server, the following error message is prompted:
java.lang.Exception: ORA-00020: maximum number of processes (150) exceeded
void MyFolder.objects.MyObject.<init>(oracle.jbo.ApplicationModule, java.lang.String, java.lang.String, javax.servlet.http.HttpServletRequest)
void MyFolder.servlet.MyServlet.doPost(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
void javax.servlet.http.HttpServlet.service(com.evermind.server.http.EvermindHttpServletRequest, com.evermind.server.http.EvermindHttpServletResponse)
void javax.servlet.http.HttpServlet.service(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
void javax.servlet.http.HttpServlet.service(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
void com.evermind.server.http.ServletRequestDispatcher.invoke(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
void com.evermind.server.http.ServletRequestDispatcher.forwardInternal(javax.servlet.ServletRequest, javax.servlet.http.HttpServletResponse)
boolean com.evermind.server.http.HttpRequestHandler.processRequest(com.evermind.server.ApplicationServerThread, com.evermind.server.http.EvermindHttpServletRequest, com.evermind.server.http.EvermindHttpServletResponse, java.io.InputStream, java.io.OutputStream, boolean)
void com.evermind.server.http.HttpRequestHandler.run(java.lang.Thread)
void com.evermind.util.ThreadPoolThread.run()
Question:
- What is the cause of this error message? How to avoid?.
From the Oracle error message documentation:
ORA-00020 maximum number of processes (string) exceeded
Cause: All process state objects are in use.
Action: Increase the value of the PROCESSES initialization parameter.
Another alternative approach may be to configure your Connection pool and/or your ApplicationModule pool to optimize the use of
database connections and/or restrict the number of database connections used by the application. For example, if your application
has declared many root ApplicationModules (i.e. more than one ApplicationModule pool is in use) then it may help to enable the
jbo.doconnectionpooling switch so that each ApplicationModule instance in the pools does not maintain a dedicated database
connection while not in use. Another alternative if you are using the BC4J connection pool (not a JDBC datasource) may be to
restrict the number of connections the pool can create to < 150 with the jbo.maxpoolsize switch. However, please note that this
may have an impact on throughput.
- I intended to deploy my application to 9IAS server. Will the same problem occurs too?.
This is a database issue. So, yes.
Hope this helps.
JR -
ORA-19921: maximum number of 64 rows exceeded
while trying to connect to the database through rman, I got this error;
Recovery Manager: Release 10.2.0.2.0 - Production on Tue Nov 24 10:59:34 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
RMAN-06900: WARNING: unable to generate V$RMAN_STATUS or V$RMAN_OUTPUT row
RMAN-06901: WARNING: disabling update of the V$RMAN_STATUS and V$RMAN_OUTPUT rows
ORACLE error from target database:
ORA-19921: maximum number of 64 rows exceeded
connected to target database: <SID> (DBID=XXXXXXXXXX)
RMAN>
This is Oracle 10g running on AIX server.
Can anyone have an idea of resolving this issue.
Regards
PaulTellling the OpsTeam to ignore RMAN jobs that return errors is not an ideal solution.
Similar errors continue after upgrading to 12.0.4.2.
So the fix, does not fix all occurrances.
Have found additional information, and you may be able to look at your errors too for more info.
connected to target database: MyTargetDB (DBID=1591642534)
RMAN-06900: WARNING: unable to generate V$RMAN_STATUS or V$RMAN_OUTPUT row
RMAN-06901: WARNING: disabling update of the V$RMAN_STATUS and V$RMAN_OUTPUT rows
ORACLE error from target database:
ORA-19921: maximum number of 128 rows exceeded
SQL> connect system@mytargetdb
Enter password: *******
Connected.
SQL> select count(*) from v$rman_output;
COUNT(*)
32948
SQL> select * from v$rman_output where rownum <2;
SID RECID STAMP SESSION_RECID SESSION_STAMP
OUTPUT
RMAN_STATUS_RECID RMAN_STATUS_STAMP SESSION_KEY
505 1 709915346 186630 709912681
RMAN-06207: WARNING: 1 objects could not be deleted for SBT_TAPE channel(s) due
187039 709915343 186630
SQL> select count(*) from v$rman_output
where OUTPUT like 'RMAN-06207%'
COUNT(*)
3248 <==== only about 10% of the rows have the same RMAN-06207 error
SQL> select * from v$rman_output where SESSION_KEY <> 186630;
no rows selected <=== All rows appear to have SESSION_KEY 186630
I have opened an SR with Oracle Support to find out how to clear out the error mesage entries in v$rman_output.
I will also need to determine why the RMAN deletion of backups placed these (and other) messages into this table. -
Maximum number of partitions allowed per table.
Interesting findings with interval partitioning:
SQL> SELECT *
2 FROM v$version
3 /
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
PL/SQL Release 11.2.0.3.0 - Production
CORE 11.2.0.3.0 Production
TNS for 64-bit Windows: Version 11.2.0.3.0 - Production
NLSRTL Version 11.2.0.3.0 - Production
SQL> DROP TABLE tbl PURGE
2 /
Table dropped.
SQL> CREATE TABLE tbl(
2 id number(6),
3 dt date
4 )
5 PARTITION BY RANGE(dt)
6 INTERVAL (INTERVAL '1' DAY)
7 (
8 PARTITION p1 VALUES LESS THAN (date '-857-12-31')
9 )
10 /
Table created.
SQL> select partition_name,
2 high_value
3 from user_tab_partitions
4 where table_name = 'TBL'
5 /
PARTITION_NAME HIGH_VALUE
P1 TO_DATE('-0857-12-31 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'N
LS_CALENDAR=GREGORIAN')
SQL> INSERT
2 INTO tbl
3 VALUES(
4 1,
5 sysdate
6 )
7 /
1 row created.
SQL> DROP TABLE tbl PURGE
2 /
Table dropped.
SQL> CREATE TABLE tbl(
2 id number(6),
3 dt date
4 )
5 PARTITION BY RANGE(dt)
6 INTERVAL (INTERVAL '1' DAY)
7 (
8 PARTITION p1 VALUES LESS THAN (date '-858-01-01')
9 )
10 /
Table created.
SQL> select partition_name,
2 high_value
3 from user_tab_partitions
4 where table_name = 'TBL'
5 /
PARTITION_NAME HIGH_VALUE
P1 TO_DATE('-0858-01-01 00:00:00', 'SYYYY-MM-DD HH24:MI:SS', 'N
LS_CALENDAR=GREGORIAN')
SQL> INSERT
2 INTO tbl
3 VALUES(
4 1,
5 sysdate
6 )
7 /
INTO tbl
ERROR at line 2:
ORA-14300: partitioning key maps to a partition outside maximum permitted number of partitions
SQL> From Logical Database Limits:
Maximum number of partitions allowed per table or index: 1024K - 1
I always thought limit implies to number of actual, not potential partitions, however it looks like I was wrong, although it makes not much sense to limit potential and not actual partitions:
SQL> select trunc(sysdate) - date '-858-01-01',
2 1024 * 1024 - 1
3 from dual
4 /
TRUNC(SYSDATE)-DATE'-858-01-01' 1024*1024-1
1048661 1048575
SQL> select to_char(DATE'-858-01-01' + 1048575,'MM/DD/YYYY')
2 from dual
3 /
TO_CHAR(DA
11/17/2012
SQL> So tomorrow "magic" date should increase by one day. I'll test it. But more interesting if tomorrow I will be able to insert a row that forms a new partition into table TBL.
SY.rp0428 wrote:
The other argument is that Oracle has to be able to automatically create any partition required and it can only create 1024k - 1. So if you create yours with sysdate how could it create all of the others?Not sure I follow. What is the purpose of counting potential partitions? Partition part# iin sys.tabpart$ is not assigned based on potential partition position. If I issue a DDL to create new partition regardless of interval/non-interval partitioning Oracle has to check how many partitions table has so far or po and raise same/similar exception if partition I am asking to create is over the limit. And, in any case, knowing we can create all potential partitions at table create time doesn't mean I will not try to insert data outside the range. So there is absolutely no guarantee Oracle can automatically create any partition requested. Again, I don't understand why creating non-interval partitioned table with a single initial partition has partition count of 1:
SQL> DROP TABLE tbl1 PURGE
2 /
Table dropped.
SQL> CREATE TABLE tbl1(
2 id number(6),
3 dt date
4 )
5 PARTITION BY RANGE(dt)
6 (
7 PARTITION p1 VALUES LESS THAN (date '-857-12-31')
8 )
9 /
Table created.
SQL> SELECT partition_count
2 FROM user_part_tables
3 WHERE table_name = 'TBL1'
4 /
PARTITION_COUNT
1
SQL>And interval partitioned table with same single initial partition has partition count of 1048575:
SQL> CREATE TABLE tbl1(
2 id number(6),
3 dt date
4 )
5 PARTITION BY RANGE(dt)
6 INTERVAL (INTERVAL '1' DAY)
7 (
8 PARTITION p1 VALUES LESS THAN (date '-857-12-31')
9 )
10 /
Table created.
SQL> SELECT partition_count
2 FROM user_part_tables
3 WHERE table_name = 'TBL1'
4 /
PARTITION_COUNT
1048575
SQL> Would be interesting to find out what forces Oracle to go into potential partition mode for interval partitioning.
SY. -
ORA-00020: maximum number of processes (500) exceeded
Problem Details:
In our Database we are getting huge number of open connection from remote system.
Let say, our application A and remote application name is B.
Some common users of application A are USER0, USER1, USER2.
Remote Application B uses USER0 to create views on application A's table through Database Link.
Those views (nearly 100) are accessed in application B at several places from the Java code.
Since those views are getting called almost all the times from the application B's code, DB link is in use almost all the time - holding many number of connections (check the first row of the query output).
Many times the open connections remaining high and any other application, users trying to connect to application A,
getting the ORA-00020 error.
Note :
1. Application B is very old application and does not use open DB link or close DB link.
2. Application B tried with "alter session close Database link xxx", it decrease the number of open connection but its degrading the performance of application B at large scale.
3. To cope up with this problem Application A recently incraesed the parameter process=500, but not sure if this limit can also be broken through Application B
Questions/Doubts:
1) What is best approach to handle this problem??
'alter session close database link xxx' is the only option from application B's point ??
What other approach can be taken??
2) We are not sure the risk associated with increasing the process parameter value ??
Appreciate your suggestion !!
SQL>conn / as sysdba
SQL> select substr(username,1,8),
substr(machine,1,11),
substr(module,1,40),
substr(osuser,1,7),
status,
count(1)
from v$session
group by username, machine, module, osuser, status;
USERNAME MACHINE STATUS OSUSER COUNT(1)
USER0 remotedb9 INACTIVE oracle 450
USER1 app_dev INACTIVE beaadmin 1
USER0 svr01test ACTIVE bdgp_dev 1
USER1 app_test INACTIVE bbk09 2
USER0 app_dev ACTIVE dj0494 1
USER1 app_test INACTIVE pd0269 2
USER2 app_test INACTIVE oracle 12
USER0 app_dev ACTIVE oracle 2
USER2 app_test INACTIVE www 8
USER2 dbr9db01 ACTIVE oracle 2
USER2 svr01dv INACTIVE bdgp_dev 1
USER0 app_dev INACTIVE scott 3
USER2 app_test INACTIVE clerk 2
USER2 moose ACTIVE john 2
USER2 titan.homer INACTIVE voipdu 1
NEWUSER floradbdv1 INACTIVE oracle 8
SYS app_test ACTIVE oracle 1
20 rows selected.
SQL>conn USER0@csmip_st
Enter password:
ERROR:
ORA-00020: maximum number of processes (500) exceeded
Warning: You are no longer connected to ORACLE.semmsl in Linux tells what the max number of processes are. You have to make sure this is equal to the process parameter of all instances plus 10.
It is usually in /etc/sysctl.conf
kernel.sem = 250 32000 100 128
SEMMSL
The SEMMSL kernel parameter is used to control the maximum number of semaphores per semaphore set.
Oracle recommends setting SEMMSL to the largest PROCESS instance parameter setting in the init.ora file for all databases hosted on the Linux system plus 10. Also, Oracle recommends setting the SEMMSL to a value of no less than 100.
SEMMNI
The SEMMNI kernel parameter is used to control the maximum number of semaphore sets on the entire Linux system.
Oracle recommends setting the SEMMNI to a value of no less than 100.
SEMMNS
The SEMMNS kernel parameter is used to control the maximum number of semaphores (not semaphore sets) on the entire Linux system.
Oracle recommends setting the SEMMNS to the sum of the PROCESSES instance parameter setting for each database on the system, adding the largest PROCESSES twice, and then finally adding 10 for each Oracle database on the system. To summarize:
SEMMNS = sum of PROCESSES setting for each database on the system
+ ( 2 * [largest PROCESSES setting])
+ (10 * [number of databases on system]
To determine the maximum number of semaphores that can be allocated on a Linux system, use the following calculation. It will be the lesser of:
SEMMNS -or- (SEMMSL * SEMMNI)
SEMOPM
The SEMOPM kernel parameter is used to control the number of semaphore operations that can be performed per semop system call.
The semop system call (function) provides the ability to do operations for multiple semaphores with one semop system call. A semaphore set can have the maximum number of SEMMSL semaphores per semaphore set and is therefore recommended to set SEMOPM equal to SEMMSL.
Oracle recommends setting the SEMOPM to a value of no less than 100.
App B could try using connection pooling or something to reduce the number of connections to the DB. -
Hi,
I have configure stream analytics to read messages from eventhub and I am getting this error message:Correlation ID:
e185534f-9e82-4efc-8050-5294796fb275
Error:
Exceeded the maximum number of allowed receivers per partition in a consumer group which is 5 TrackingId:4569eca8-cb70-4c50-96cd-5868bfbc3e37_B45,TimeStamp:1/7/2015 11:40:37 PM TrackingId:f408292e-0dab-40cc-8ae9-2730313c3241_B45, Reference:8fca3c6a-b0d1-41cf-a835-f7c74a2ea8c3,
Timestamp:1/7/2015 11:40:37 PM
Message:
Exceeded the maximum number of allowed receivers per partition in a consumer group which is 5
Message Time:
2015-01-07 23:40:38Z
Microsoft.Resources/EventNameV2:
sharedNode92F920DE-290E-4B4C-861A-F85A4EC01D82.naveenevents_0_c76f7247_25b7_4ca6_a3b6_c7bf192ba44a#0.output
Microsoft.Resources/Operation:
Receive Events
Microsoft.Resources/ResourceUri:
/subscriptions/f122f431-ddc7-4e21-ae3a-f6a9e1273bcb/resourceGroups/StreamAnalytics-Default-Central-US/providers/Microsoft.StreamAnalytics/streamingjobs/Naveenstreamanalytics
Type:
EventHubInputAdapterEventHubFailure
Any help on the same is appreciated.
Thanks
NaveenHi Naveen,
Thanks for reporting this issue. We are taking a look at this issue.
Questions:
Do you have multiple readers reading from this EventHub, or have you setup multiple Stream Analystics jobs reading from this event hub. You are hitting a limitation of how many readers are allowed per EH consumer group.
What is the serialization format of your input (JSON/CSV)? Could you please verify the serialization format setup in the streaming job and if it matches your data?
Thanks
Zafar Abbas -
ORA-01795:maximum number of expressions in a list is 1000
Hi,
JDev 11.1.1.5.0
I've a usecase, where i need to pass more than 1000 values for IN clause.
I found that, there is some restriction in number of values for IN clause to 1000.
I got following reference on this issue
ORA-01795:maximum number of expressions in a list is 1000. Any work around?
Conclusion:
there are two options to fix this issue
Fix 1:
You can have any number of tuples, not just 1000, in an IN-list like this:
(id, 0) IN ( (1,0), (2,0), (3,0), (5,0), (8,0), ... )
Fix 2:
Use global temporary table to populate values and then use the temp table
select * from table A1 where A1.ID in (Select ID from temp_table)
Please suggest the best option to fix our issue.
As of now, i am applying IN clause as
inClause = (1,2,3,4,5...)
criteriaRow.setAttribute("id", inClause);
I can prepare inClause as per Fix 1. But iam concern about setting attribute as (id,0)
can you suggest a way to apply as (id,0) IN (...)
Thanks in advance,
Samba.I would suggest fix nr 2. Since it's more flexible (for example when the list of items changes then you don't want to change every IN clause).
-
ORA 01792 maximum number of columns in a table or view is 1000
Hello every1, I wish to register a large xmlschema doc, I am using the command
begin
dbms_xmlschema.registerschema(
schemaurl=>'xxxx',
schemadoc=>bfilename('XMLDIR','xxxxxx.xsd'),
csid=>nls_charset_id('AL32UTF8'));
end;
But the schema file exists 1000 col and it gives me the error msg of
ORA-01792: maximum number of columns in a table or view is 1000
is there anyway to solve the problems without edit the original schema document?
Thanks for your helpFirst create this package
create or replace package XDB_ANALYZE_XMLSCHEMA_10200
authid CURRENT_USER
as
function analyzeStorageModel(P_COMPLEX_TYPE_NAME VARCHAR2) return XMLTYPE;
function analyzeComplexType(COMPLEX_TYPE VARCHAR2) return XMLTYPE;
procedure renameCollectionTable (XMLTABLE varchar2, XPATH varchar2, COLLECTION_TABLE_PREFIX varchar2);
function printNestedTables(XML_TABLE varchar2) return XMLType;
function getComplexTypeElementList(P_SQLTYPE VARCHAR2, P_SQLSCHEMA VARCHAR2) return XDB.XDB$XMLTYPE_REF_LIST_T;
procedure scopeXMLReferences;
procedure indexXMLReferences(INDEX_NAME VARCHAR2);
function generateSchemaFromTable(P_TABLE_NAME varchar2, P_OWNER varchar2 default USER) return XMLTYPE;
function showSQLTypes(schemaFolder varchar2) return XMLType;
function generateCreateTableStatement(XML_TABLE_NAME varchar2, NEW_TABLE_NAME varchar2) return CLOB;
end XDB_ANALYZE_XMLSCHEMA_10200;
show errors
create or replace package body XDB_ANALYZE_XMLSCHEMA_10200
as
G_DEPTH_COUNT NUMBER(2) := 0;
TYPE BASETYPE_T is RECORD
SUBTYPE varchar2(128),
SUBTYPE_OWNER varchar2(32),
BASETYPE varchar2(128),
BASETYPE_OWNER varchar2(32)
TYPE BASETYPE_LIST_T IS TABLE OF BASETYPE_T;
BASETYPE_LIST BASETYPE_LIST_T := BASETYPE_LIST_T();
function findStorageModel(P_TYPE_NAME VARCHAR2, P_TYPE_OWNER VARCHAR2, P_INCLUDE_SUBTYPES VARCHAR2 DEFAULT 'YES') return XMLType;
function getLocalAttributes(P_TYPE_NAME varchar2, P_TYPE_OWNER VARCHAR2) return XMLType;
function makeElement(P_NAME varchar2)
return xmltype
as
V_NAME varchar2(4000) := P_NAME;
begin
-- -- dbms_output.put_line('Processing : ' || P_NAME);
if (P_NAME LIKE '%$') then
V_NAME := SUBSTR(V_NAME,1,LENGTH(V_NAME) - 1);
end if;
if (P_NAME LIKE '%$%') then
V_NAME := REPLACE(V_NAME,'$','_0x22_');
end if;
return XMLTYPE( '<' || V_NAME || '/>');
end;
function getPathToRoot(SUBTYPE VARCHAR2, SUBTYPE_OWNER VARCHAR2)
return varchar2
as
TYPE_HIERARCHY varchar2(4000);
begin
SELECT sys_connect_by_path( OWNER || '.' || TYPE_NAME , '/')
INTO TYPE_HIERARCHY
FROM ALL_TYPES
WHERE TYPE_NAME = SUBTYPE
AND OWNER = SUBTYPE_OWNER
CONNECT BY SUPERTYPE_NAME = PRIOR TYPE_NAME
AND SUPERTYPE_OWNER = PRIOR OWNER
START WITH SUPERTYPE_NAME IS NULL
AND SUPERTYPE_OWNER IS NULL;
return TYPE_HIERARCHY;
end;
function expandSQLType(ATTR_NAME VARCHAR2, SUBTYPE VARCHAR2, SUBTYPE_OWNER VARCHAR2)
return XMLType
as
STORAGE_MODEL XMLTYPE;
ATTRIBUTES XMLTYPE;
EXTENDED_TYPE XMLTYPE;
ATTR_COUNT NUMBER := 0;
CURSOR FIND_EXTENDED_TYPES
is
select TYPE_NAME, OWNER
from ALL_TYPES
where SUPERTYPE_NAME = SUBTYPE
and SUPERTYPE_OWNER = SUBTYPE_OWNER;
begin
-- dbms_output.put_line('Processing SQLType : "' || SUBTYPE_OWNER || '.' || SUBTYPE || '".' );
STORAGE_MODEL := makeElement(ATTR_NAME);
select insertChildXML(STORAGE_MODEL,'/' || STORAGE_MODEL.getRootElement(),'@type',SUBTYPE)
into STORAGE_MODEL
from dual;
select insertChildXML(STORAGE_MODEL,'/' || STORAGE_MODEL.getRootElement(),'@typeOwner',SUBTYPE_OWNER)
into STORAGE_MODEL
from dual;
ATTRIBUTES := getLocalAttributes(SUBTYPE, SUBTYPE_OWNER);
ATTR_COUNT := ATTR_COUNT + ATTRIBUTES.extract('/' || ATTRIBUTES.getRootElement() || '/@columns').getNumberVal();
select appendChildXML(STORAGE_MODEL,'/' || STORAGE_MODEL.getRootElement(),ATTRIBUTES)
into STORAGE_MODEL
from DUAL;
for t in FIND_EXTENDED_TYPES loop
EXTENDED_TYPE := expandSQLType('ExtendedType',T.TYPE_NAME,T.OWNER);
ATTR_COUNT := ATTR_COUNT + EXTENDED_TYPE.extract('/' || EXTENDED_TYPE.getRootElement() || '/@columns').getNumberVal();
select appendChildXML(STORAGE_MODEL,'/' || STORAGE_MODEL.getRootElement(),EXTENDED_TYPE)
into STORAGE_MODEL
from DUAL;
end loop;
select insertChildXML(STORAGE_MODEL,'/' || STORAGE_MODEL.getRootElement(),'@columns',ATTR_COUNT)
into STORAGE_MODEL
from dual;
return STORAGE_MODEL;
end;
function getLocalAttributes(P_TYPE_NAME varchar2, P_TYPE_OWNER VARCHAR2)
return XMLType
as
V_ATTRIBUTE_COUNT NUMBER := 0;
V_TOTAL_ATTRIBUTES NUMBER := 0;
V_TEMP_RESULT NUMBER;
V_COLLECTION_TYPE varchar2(32);
V_COLLECTION_OWNER varchar2(32);
CURSOR FIND_CHILD_ATTRS
is
select ATTR_NAME, ATTR_TYPE_OWNER, ATTR_TYPE_NAME, INHERITED
from ALL_TYPE_ATTRS
where TYPE_NAME = P_TYPE_NAME
and OWNER = P_TYPE_OWNER
and INHERITED = 'NO'
order by ATTR_NO;
V_ATTR DBMS_XMLDOM.DOMATTR;
V_ATTRIBUTE_LIST XMLTYPE;
V_ATTRIBUTE_LIST_DOCUMENT DBMS_XMLDOM.DOMDOCUMENT;
V_ATTRIBUTE_LIST_ROOT DBMS_XMLDOM.DOMELEMENT;
V_ATTRIBUTE XMLTYPE;
V_ATTRIBUTE_DOCUMENT DBMS_XMLDOM.DOMDOCUMENT;
V_ATTRIBUTE_ROOT DBMS_XMLDOM.DOMELEMENT;
V_TYPE_DEFINITION XMLTYPE;
V_TYPE_DEFINITION_DOCUMENT DBMS_XMLDOM.DOMDOCUMENT;
V_TYPE_DEFINITION_ROOT DBMS_XMLDOM.DOMELEMENT;
begin
V_ATTRIBUTE_LIST := makeElement('Attributes');
V_ATTRIBUTE_LIST_DOCUMENT := DBMS_XMLDOM.NEWDOMDOCUMENT(V_ATTRIBUTE_LIST);
V_ATTRIBUTE_LIST_ROOT := DBMS_XMLDOM.GETDOCUMENTELEMENT(V_ATTRIBUTE_LIST_DOCUMENT);
for ATTR in FIND_CHILD_ATTRS loop
-- Finding Element / Attribute Name could be tricky. Use SQLName
V_ATTRIBUTE := makeElement(ATTR.ATTR_NAME);
V_ATTRIBUTE_DOCUMENT := DBMS_XMLDOM.NEWDOMDOCUMENT(V_ATTRIBUTE);
V_ATTRIBUTE_ROOT := DBMS_XMLDOM.GETDOCUMENTELEMENT(V_ATTRIBUTE_DOCUMENT);
begin
-- Check for Attributes based on collection types, With Nested Table storage each Collection will cost 2 columns.
select ELEM_TYPE_NAME, ELEM_TYPE_OWNER
into V_COLLECTION_TYPE, V_COLLECTION_OWNER
from ALL_COLL_TYPES
where TYPE_NAME = ATTR.ATTR_TYPE_NAME
and OWNER = ATTR.ATTR_TYPE_OWNER;
-- -- dbms_output.put_line('Adding "' || ATTR.ATTR_NAME || '". Collection of "' || ATTR.ATTR_TYPE_OWNER || '"."' || ATTR.ATTR_TYPE_NAME || '".');
-- Attribute is a Collection Type.
-- Collection will be managed as a NESTED TABLE
-- Each Collection cost 2 columns.
-- May want to count the number of columns in the NESTED_TABLE at a later date.
V_ATTR := DBMS_XMLDOM.CREATEATTRIBUTE(V_ATTRIBUTE_DOCUMENT,'SQLCollType');
DBMS_XMLDOM.SETVALUE(V_ATTR,ATTR.ATTR_TYPE_NAME);
V_ATTR := DBMS_XMLDOM.SETATTRIBUTENODE(V_ATTRIBUTE_ROOT,V_ATTR);
V_ATTR := DBMS_XMLDOM.CREATEATTRIBUTE(V_ATTRIBUTE_DOCUMENT,'SQLCollTypeOwner');
DBMS_XMLDOM.SETVALUE(V_ATTR,ATTR.ATTR_TYPE_OWNER);
V_ATTR := DBMS_XMLDOM.SETATTRIBUTENODE(V_ATTRIBUTE_ROOT,V_ATTR);
V_ATTR := DBMS_XMLDOM.CREATEATTRIBUTE(V_ATTRIBUTE_DOCUMENT,'SQLType');
DBMS_XMLDOM.SETVALUE(V_ATTR,V_COLLECTION_TYPE);
V_ATTR := DBMS_XMLDOM.SETATTRIBUTENODE(V_ATTRIBUTE_ROOT,V_ATTR);
V_ATTR := DBMS_XMLDOM.CREATEATTRIBUTE(V_ATTRIBUTE_DOCUMENT,'SQLTypeOwner');
DBMS_XMLDOM.SETVALUE(V_ATTR,V_COLLECTION_OWNER);
V_ATTR := DBMS_XMLDOM.SETATTRIBUTENODE(V_ATTRIBUTE_ROOT,V_ATTR);
V_ATTR := DBMS_XMLDOM.CREATEATTRIBUTE(V_ATTRIBUTE_DOCUMENT,'columns');
DBMS_XMLDOM.SETVALUE(V_ATTR,2);
V_ATTR := DBMS_XMLDOM.SETATTRIBUTENODE(V_ATTRIBUTE_ROOT,V_ATTR);
exception
when no_data_found then
-- Attribute is not a collection type.
begin
-- Check for Attributes based on non-scalar types.
select 1
into V_TEMP_RESULT
from ALL_TYPES
where TYPE_NAME = ATTR.ATTR_TYPE_NAME
and OWNER = ATTR.ATTR_TYPE_OWNER;
-- Attribute is based on a non-scalar type. Find the Storage Model for this type.
V_ATTR := DBMS_XMLDOM.CREATEATTRIBUTE(V_ATTRIBUTE_DOCUMENT,'SQLType');
DBMS_XMLDOM.SETVALUE(V_ATTR,ATTR.ATTR_TYPE_NAME);
V_ATTR := DBMS_XMLDOM.SETATTRIBUTENODE(V_ATTRIBUTE_ROOT,V_ATTR);
V_ATTR := DBMS_XMLDOM.CREATEATTRIBUTE(V_ATTRIBUTE_DOCUMENT,'SQLTypeOwner');
DBMS_XMLDOM.SETVALUE(V_ATTR,ATTR.ATTR_TYPE_OWNER);
V_ATTR := DBMS_XMLDOM.SETATTRIBUTENODE(V_ATTRIBUTE_ROOT,V_ATTR);
V_TYPE_DEFINITION := findStorageModel(ATTR.ATTR_TYPE_NAME, ATTR.ATTR_TYPE_OWNER, 'YES');
V_TYPE_DEFINITION_DOCUMENT := DBMS_XMLDOM.NEWDOMDOCUMENT(V_TYPE_DEFINITION);
V_TYPE_DEFINITION_ROOT := DBMS_XMLDOM.GETDOCUMENTELEMENT(V_TYPE_DEFINITION_DOCUMENT);
V_ATTRIBUTE_COUNT := DBMS_XMLDOM.GETATTRIBUTE(V_TYPE_DEFINITION_ROOT,'columns');
V_TYPE_DEFINITION_ROOT := DBMS_XMLDOM.MAKEELEMENT(DBMS_XMLDOM.IMPORTNODE(V_ATTRIBUTE_DOCUMENT,DBMS_XMLDOM.MAKENODE(V_TYPE_DEFINITION_ROOT),TRUE));
V_TYPE_DEFINITION_ROOT := DBMS_XMLDOM.MAKEELEMENT(DBMS_XMLDOM.APPENDCHILD(DBMS_XMLDOM.MAKENODE(V_ATTRIBUTE_ROOT),DBMS_XMLDOM.MAKENODE(V_TYPE_DEFINITION_ROOT)));
DBMS_XMLDOM.FREEDOCUMENT(V_TYPE_DEFINITION_DOCUMENT);
if (ATTR.ATTR_TYPE_NAME = 'XDB$ENUM_T' and ATTR.ATTR_TYPE_OWNER = 'XDB') then
-- The cost of a XDB$ENUM_T is 2 columns
V_ATTR := DBMS_XMLDOM.CREATEATTRIBUTE(V_ATTRIBUTE_DOCUMENT,'columns');
DBMS_XMLDOM.SETVALUE(V_ATTR,2);
V_ATTR := DBMS_XMLDOM.SETATTRIBUTENODE(V_ATTRIBUTE_ROOT,V_ATTR);
else
-- The cost of a non scalar Type is the number of attributes plus one for Type and one for the TYPEID.
V_ATTR := DBMS_XMLDOM.CREATEATTRIBUTE(V_ATTRIBUTE_DOCUMENT,'columns');
DBMS_XMLDOM.SETVALUE(V_ATTR,V_ATTRIBUTE_COUNT + 2);
V_ATTR := DBMS_XMLDOM.SETATTRIBUTENODE(V_ATTRIBUTE_ROOT,V_ATTR);
end if;
exception
when no_data_found then
-- Attribute is based on a scalar type
V_ATTR := DBMS_XMLDOM.CREATEATTRIBUTE(V_ATTRIBUTE_DOCUMENT,'SQLType');
DBMS_XMLDOM.SETVALUE(V_ATTR,ATTR.ATTR_TYPE_NAME);
V_ATTR := DBMS_XMLDOM.SETATTRIBUTENODE(V_ATTRIBUTE_ROOT,V_ATTR);
V_ATTR := DBMS_XMLDOM.CREATEATTRIBUTE(V_ATTRIBUTE_DOCUMENT,'columns');
DBMS_XMLDOM.SETVALUE(V_ATTR,1);
V_ATTR := DBMS_XMLDOM.SETATTRIBUTENODE(V_ATTRIBUTE_ROOT,V_ATTR);
end;
end;
V_TOTAL_ATTRIBUTES := V_TOTAL_ATTRIBUTES + DBMS_XMLDOM.GETATTRIBUTE(V_ATTRIBUTE_ROOT,'columns');
V_ATTRIBUTE_ROOT := DBMS_XMLDOM.MAKEELEMENT(DBMS_XMLDOM.IMPORTNODE(V_ATTRIBUTE_LIST_DOCUMENT,DBMS_XMLDOM.MAKENODE(V_ATTRIBUTE_ROOT),TRUE));
V_ATTRIBUTE_ROOT := DBMS_XMLDOM.MAKEELEMENT(DBMS_XMLDOM.APPENDCHILD(DBMS_XMLDOM.MAKENODE(V_ATTRIBUTE_LIST_ROOT),DBMS_XMLDOM.MAKENODE(V_ATTRIBUTE_ROOT)));
DBMS_XMLDOM.FREEDOCUMENT(V_ATTRIBUTE_DOCUMENT);
if (V_TOTAL_ATTRIBUTES > 25000) then
exit;
end if;
end loop;
V_ATTR := DBMS_XMLDOM.CREATEATTRIBUTE(V_ATTRIBUTE_LIST_DOCUMENT,'columns');
DBMS_XMLDOM.SETVALUE(V_ATTR,V_TOTAL_ATTRIBUTES);
V_ATTR := DBMS_XMLDOM.SETATTRIBUTENODE(V_ATTRIBUTE_LIST_ROOT,V_ATTR);
return V_ATTRIBUTE_LIST;
end;
function getSubTypes(P_TYPE_NAME VARCHAR2, P_TYPE_OWNER VARCHAR2)
return XMLType
as
CURSOR FIND_SUBTYPES
is
select TYPE_NAME, OWNER
from ALL_TYPES
where SUPERTYPE_NAME = P_TYPE_NAME
and SUPERTYPE_OWNER = P_TYPE_OWNER;
CURSOR FIND_SUBTYPE_HEIRARCHY
is
select LEVEL, TYPE_NAME, OWNER
from ALL_TYPES
where TYPE_NAME <> P_TYPE_NAME
and OWNER <> P_TYPE_OWNER
connect by SUPERTYPE_NAME = PRIOR TYPE_NAME
and SUPERTYPE_OWNER = PRIOR OWNER
start with TYPE_NAME = P_TYPE_NAME
and OWNER = P_TYPE_OWNER;
V_SUBTYPE_LIST XMLType;
V_SUBTYPE_LIST_DOCUMENT DBMS_XMLDOM.DOMDOCUMENT;
V_SUBTYPE_LIST_ROOT DBMS_XMLDOM.DOMELEMENT;
V_TYPE_DEFINITION XMLType;
V_TYPE_DEFINITION_DOCUMENT DBMS_XMLDOM.DOMDOCUMENT;
V_TYPE_DEFINITION_ROOT DBMS_XMLDOM.DOMELEMENT;
V_SUBTYPE_DEFINITIONS XMLType;
V_SUBTYPE_DEFINITIONS_DOCUMENT DBMS_XMLDOM.DOMDOCUMENT;
V_SUBTYPE_DEFINITIONS_ROOT DBMS_XMLDOM.DOMELEMENT;
V_ATTRIBUTE_LIST XMLType;
V_ATTRIBUTE_LIST_DOCUMENT DBMS_XMLDOM.DOMDOCUMENT;
V_ATTRIBUTE_LIST_ROOT DBMS_XMLDOM.DOMELEMENT;
V_SUBTYPES_EXIST BOOLEAN := FALSE;
V_TOTAL_columns number;
V_ATTRIBUTE_COUNT number;
V_ATTR DBMS_XMLDOM.DOMATTR;
V_COMPLEX_TYPE VARCHAR2(256);
begin
V_SUBTYPE_LIST := makeElement('SubTypeDefinitions');
V_SUBTYPE_LIST_DOCUMENT := DBMS_XMLDOM.NEWDOMDOCUMENT(V_SUBTYPE_LIST);
V_SUBTYPE_LIST_ROOT := DBMS_XMLDOM.GETDOCUMENTELEMENT(V_SUBTYPE_LIST_DOCUMENT);
V_TOTAL_columns := 0;
for t in FIND_SUBTYPES() loop
V_SUBTYPES_EXIST := TRUE;
V_TYPE_DEFINITION := makeElement(t.TYPE_NAME);
V_TYPE_DEFINITION_DOCUMENT := DBMS_XMLDOM.NEWDOMDOCUMENT(V_TYPE_DEFINITION);
V_TYPE_DEFINITION_ROOT := DBMS_XMLDOM.GETDOCUMENTELEMENT(V_TYPE_DEFINITION_DOCUMENT);
V_ATTR := DBMS_XMLDOM.CREATEATTRIBUTE(V_TYPE_DEFINITION_DOCUMENT,'SQLTypeOwner');
DBMS_XMLDOM.SETVALUE(V_ATTR,t.OWNER);
V_ATTR := DBMS_XMLDOM.SETATTRIBUTENODE(V_TYPE_DEFINITION_ROOT,V_ATTR);
begin
select x.XMLDATA.NAME
into V_COMPLEX_TYPE
from XDB.XDB$COMPLEX_TYPE x
where x.XMLDATA.SQLTYPE = t.TYPE_NAME
and x.XMLDATA.SQLSCHEMA = t.OWNER;
V_ATTR := DBMS_XMLDOM.CREATEATTRIBUTE(V_TYPE_DEFINITION_DOCUMENT,'type');
DBMS_XMLDOM.SETVALUE(V_ATTR,V_COMPLEX_TYPE);
V_ATTR := DBMS_XMLDOM.SETATTRIBUTENODE(V_TYPE_DEFINITION_ROOT,V_ATTR);
-- Consider adding Schema URL Attribute
exception
when no_data_found then
null;
when others then
raise;
end;
V_ATTRIBUTE_LIST := getLocalAttributes(t.TYPE_NAME, t.OWNER);
V_ATTRIBUTE_LIST_DOCUMENT := DBMS_XMLDOM.NEWDOMDOCUMENT(V_ATTRIBUTE_LIST);
V_ATTRIBUTE_LIST_ROOT := DBMS_XMLDOM.GETDOCUMENTELEMENT(V_ATTRIBUTE_LIST_DOCUMENT);
V_ATTRIBUTE_COUNT := DBMS_XMLDOM.GETATTRIBUTE(V_ATTRIBUTE_LIST_ROOT,'columns');
V_ATTRIBUTE_LIST_ROOT := DBMS_XMLDOM.MAKEELEMENT(DBMS_XMLDOM.IMPORTNODE(V_TYPE_DEFINITION_DOCUMENT,DBMS_XMLDOM.MAKENODE(V_ATTRIBUTE_LIST_ROOT),TRUE));
V_ATTRIBUTE_LIST_ROOT := DBMS_XMLDOM.MAKEELEMENT(DBMS_XMLDOM.APPENDCHILD(DBMS_XMLDOM.MAKENODE(V_TYPE_DEFINITION_ROOT),DBMS_XMLDOM.MAKENODE(V_ATTRIBUTE_LIST_ROOT)));
DBMS_XMLDOM.FREEDOCUMENT(V_ATTRIBUTE_LIST_DOCUMENT);
V_SUBTYPE_DEFINITIONS := getSubTypes(t.TYPE_NAME,t.OWNER);
if (V_SUBTYPE_DEFINITIONS is not NULL) then
V_SUBTYPE_DEFINITIONS_DOCUMENT := DBMS_XMLDOM.NEWDOMDOCUMENT(V_SUBTYPE_DEFINITIONS);
V_SUBTYPE_DEFINITIONS_ROOT := DBMS_XMLDOM.GETDOCUMENTELEMENT(V_SUBTYPE_DEFINITIONS_DOCUMENT);
V_ATTRIBUTE_COUNT := V_ATTRIBUTE_COUNT + DBMS_XMLDOM.GETATTRIBUTE(V_SUBTYPE_DEFINITIONS_ROOT,'columns');
V_SUBTYPE_DEFINITIONS_ROOT := DBMS_XMLDOM.MAKEELEMENT(DBMS_XMLDOM.IMPORTNODE(V_TYPE_DEFINITION_DOCUMENT,DBMS_XMLDOM.MAKENODE(V_SUBTYPE_DEFINITIONS_ROOT),TRUE));
V_SUBTYPE_DEFINITIONS_ROOT := DBMS_XMLDOM.MAKEELEMENT(DBMS_XMLDOM.APPENDCHILD(DBMS_XMLDOM.MAKENODE(V_TYPE_DEFINITION_ROOT),DBMS_XMLDOM.MAKENODE(V_SUBTYPE_DEFINITIONS_ROOT)));
end if;
V_ATTR := DBMS_XMLDOM.CREATEATTRIBUTE(V_TYPE_DEFINITION_DOCUMENT,'columns');
DBMS_XMLDOM.SETVALUE(V_ATTR,V_ATTRIBUTE_COUNT);
V_ATTR := DBMS_XMLDOM.SETATTRIBUTENODE(V_TYPE_DEFINITION_ROOT,V_ATTR);
V_TYPE_DEFINITION_ROOT := DBMS_XMLDOM.MAKEELEMENT(DBMS_XMLDOM.IMPORTNODE(V_SUBTYPE_LIST_DOCUMENT,DBMS_XMLDOM.MAKENODE(V_TYPE_DEFINITION_ROOT),TRUE));
V_TYPE_DEFINITION_ROOT := DBMS_XMLDOM.MAKEELEMENT(DBMS_XMLDOM.APPENDCHILD(DBMS_XMLDOM.MAKENODE(V_SUBTYPE_LIST_ROOT),DBMS_XMLDOM.MAKENODE(V_TYPE_DEFINITION_ROOT)));
V_TOTAL_columns := V_TOTAL_columns + V_ATTRIBUTE_COUNT;
end loop;
if (V_SUBTYPES_EXIST) then
V_ATTR := DBMS_XMLDOM.CREATEATTRIBUTE(V_SUBTYPE_LIST_DOCUMENT,'columns');
DBMS_XMLDOM.SETVALUE(V_ATTR,V_TOTAL_columns);
V_ATTR := DBMS_XMLDOM.SETATTRIBUTENODE(V_SUBTYPE_LIST_ROOT,V_ATTR);
return V_SUBTYPE_LIST;
else
return NULL;
end if;
end;
function findSuperTypeModel(P_TYPE_NAME VARCHAR2, P_TYPE_OWNER VARCHAR2)
return XMLType
as
begin
-- dbms_output.put_line('Processing Super Type : "' || P_TYPE_OWNER || '"."' || P_TYPE_NAME || '"');
return findStorageModel(P_TYPE_NAME, P_TYPE_OWNER,'NO');
end;
function getStorageModel(P_TYPE_NAME VARCHAR2, P_TYPE_OWNER VARCHAR2, P_INCLUDE_SUBTYPES VARCHAR2 DEFAULT 'YES')
return XMLType
as
V_TYPE_DEFINITION XMLTYPE;
V_ATTRIBUTE_COUNT NUMBER := 0;
SUBTYPE_STORAGE_MODEL XMLTYPE;
V_SUPERTYPE_DEFINITION XMLTYPE;
V_SUPERTYPE_DOCUMENT DBMS_XMLDOM.DOMDOCUMENT;
V_SUPERTYPE_ROOT DBMS_XMLDOM.DOMELEMENT;
V_SUBTYPE_DEFINITION XMLTYPE;
V_SUBTYPE_DOCUMENT DBMS_XMLDOM.DOMDOCUMENT;
V_SUBTYPE_ROOT DBMS_XMLDOM.DOMELEMENT;
V_ATTRIBUTE_LIST XMLTYPE;
V_ATTRIBUTE_LIST_DOCUMENT DBMS_XMLDOM.DOMDOCUMENT;
V_ATTRIBUTE_LIST_ROOT DBMS_XMLDOM.DOMELEMENT;
cursor FIND_SUPERTYPE_HEIRARCHY
is
select TYPE_NAME, OWNER
from ALL_TYPES
where TYPE_NAME <> P_TYPE_NAME
and OWNER <> P_TYPE_OWNER
connect by TYPE_NAME = PRIOR SUPERTYPE_NAME
and OWNER = PRIOR SUPERTYPE_OWNER
start with TYPE_NAME = P_TYPE_NAME
and OWNER = P_TYPE_OWNER
order by LEVEL;
V_COMPLEX_TYPE varchar2(256);
V_SUPERTYPE_NAME varchar2(256);
v_SUPERTYPE_OWNER varchar2(256);
V_DOCUMENT DBMS_XMLDOM.DOMDOCUMENT;
V_ROOT DBMS_XMLDOM.DOMELEMENT;
V_ATTR DBMS_XMLDOM.DOMATTR;
begin
-- dbms_output.put_line('Generating Storage Model for : "' || P_TYPE_OWNER || '"."' || P_TYPE_NAME || '"');
V_TYPE_DEFINITION := makeElement(P_TYPE_NAME);
V_DOCUMENT := DBMS_XMLDOM.NEWDOMDOCUMENT(V_TYPE_DEFINITION);
V_ROOT := DBMS_XMLDOM.GETDOCUMENTELEMENT(V_DOCUMENT);
V_ATTR := DBMS_XMLDOM.CREATEATTRIBUTE(V_DOCUMENT,'SQLTypeOwner');
DBMS_XMLDOM.SETVALUE(V_ATTR,P_TYPE_OWNER);
V_ATTR := DBMS_XMLDOM.SETATTRIBUTENODE(V_ROOT,V_ATTR);
begin
select x.XMLDATA.NAME
into V_COMPLEX_TYPE
from XDB.XDB$COMPLEX_TYPE x
where x.XMLDATA.SQLTYPE = P_TYPE_NAME
and x.XMLDATA.SQLSCHEMA = P_TYPE_OWNER;
V_ATTR := DBMS_XMLDOM.CREATEATTRIBUTE(V_DOCUMENT,'type');
DBMS_XMLDOM.SETVALUE(V_ATTR,V_COMPLEX_TYPE);
V_ATTR := DBMS_XMLDOM.SETATTRIBUTENODE(V_ROOT,V_ATTR);
-- Consider adding Schema URL Attribute
exception
when no_data_found then
null;
when others then
raise;
end;
select SUPERTYPE_NAME, SUPERTYPE_OWNER
into V_SUPERTYPE_NAME, V_SUPERTYPE_OWNER
from ALL_TYPES
where TYPE_NAME = P_TYPE_NAME
and OWNER = P_TYPE_OWNER;
-- Process SuperType.
if (V_SUPERTYPE_NAME is not null) then
V_ATTR := DBMS_XMLDOM.CREATEATTRIBUTE(V_DOCUMENT,'SQLParentType');
DBMS_XMLDOM.SETVALUE(V_ATTR,V_SUPERTYPE_NAME);
V_ATTR := DBMS_XMLDOM.SETATTRIBUTENODE(V_ROOT,V_ATTR);
V_ATTR := DBMS_XMLDOM.CREATEATTRIBUTE(V_DOCUMENT,'SQLParentTypeOwner');
DBMS_XMLDOM.SETVALUE(V_ATTR,V_SUPERTYPE_OWNER);
V_ATTR := DBMS_XMLDOM.SETATTRIBUTENODE(V_ROOT,V_ATTR);
-- Find the Definition for the super type. Do not include the definition of it's subtypes.
V_SUPERTYPE_DEFINITION := findSuperTypeModel(V_SUPERTYPE_NAME, V_SUPERTYPE_OWNER);
-- -- dbms_output.put_line(dbms_lob.substr(V_SUPERTYPE_DEFINITION.getClobVal(),1000,1));
V_SUPERTYPE_DOCUMENT := DBMS_XMLDOM.NEWDOMDOCUMENT(V_SUPERTYPE_DEFINITION);
V_SUPERTYPE_ROOT := DBMS_XMLDOM.GETDOCUMENTELEMENT(V_SUPERTYPE_DOCUMENT);
V_ATTRIBUTE_COUNT := V_ATTRIBUTE_COUNT + DBMS_XMLDOM.GETATTRIBUTE(V_SUPERTYPE_ROOT,'columns');
V_SUPERTYPE_ROOT := DBMS_XMLDOM.MAKEELEMENT(DBMS_XMLDOM.IMPORTNODE(V_DOCUMENT,DBMS_XMLDOM.MAKENODE(V_SUPERTYPE_ROOT),TRUE));
V_SUPERTYPE_ROOT := DBMS_XMLDOM.MAKEELEMENT(DBMS_XMLDOM.APPENDCHILD(DBMS_XMLDOM.MAKENODE(V_ROOT),DBMS_XMLDOM.MAKENODE(V_SUPERTYPE_ROOT)));
DBMS_XMLDOM.FREEDOCUMENT(V_SUPERTYPE_DOCUMENT);
end if;
-- Process Attributes defined directly by the Type.
V_ATTRIBUTE_LIST := getLocalAttributes(P_TYPE_NAME, P_TYPE_OWNER);
V_ATTRIBUTE_LIST_DOCUMENT := DBMS_XMLDOM.NEWDOMDOCUMENT(V_ATTRIBUTE_LIST);
V_ATTRIBUTE_LIST_ROOT := DBMS_XMLDOM.GETDOCUMENTELEMENT(V_ATTRIBUTE_LIST_DOCUMENT);
V_ATTRIBUTE_COUNT := V_ATTRIBUTE_COUNT + DBMS_XMLDOM.GETATTRIBUTE(V_ATTRIBUTE_LIST_ROOT,'columns');
V_ATTRIBUTE_LIST_ROOT := DBMS_XMLDOM.MAKEELEMENT(DBMS_XMLDOM.IMPORTNODE(V_DOCUMENT,DBMS_XMLDOM.MAKENODE(V_ATTRIBUTE_LIST_ROOT),TRUE));
V_ATTRIBUTE_LIST_ROOT := DBMS_XMLDOM.MAKEELEMENT(DBMS_XMLDOM.APPENDCHILD(DBMS_XMLDOM.MAKENODE(V_ROOT),DBMS_XMLDOM.MAKENODE(V_ATTRIBUTE_LIST_ROOT)));
DBMS_XMLDOM.FREEDOCUMENT(V_ATTRIBUTE_LIST_DOCUMENT);
if (P_INCLUDE_SUBTYPES = 'YES') then
-- Process any Sub-Types...
V_SUBTYPE_DEFINITION := getSubTypes(P_TYPE_NAME, P_TYPE_OWNER);
if (V_SUBTYPE_DEFINITION is not null) then
V_SUBTYPE_DOCUMENT := DBMS_XMLDOM.NEWDOMDOCUMENT(V_SUBTYPE_DEFINITION);
V_SUBTYPE_ROOT := DBMS_XMLDOM.GETDOCUMENTELEMENT(V_SUBTYPE_DOCUMENT);
V_ATTRIBUTE_COUNT := V_ATTRIBUTE_COUNT + DBMS_XMLDOM.GETATTRIBUTE(V_SUBTYPE_ROOT,'columns');
V_SUBTYPE_ROOT := DBMS_XMLDOM.MAKEELEMENT(DBMS_XMLDOM.IMPORTNODE(V_DOCUMENT,DBMS_XMLDOM.MAKENODE(V_SUBTYPE_ROOT),TRUE));
V_SUBTYPE_ROOT := DBMS_XMLDOM.MAKEELEMENT(DBMS_XMLDOM.APPENDCHILD(DBMS_XMLDOM.MAKENODE(V_ROOT),DBMS_XMLDOM.MAKENODE(V_SUBTYPE_ROOT)));
DBMS_XMLDOM.FREEDOCUMENT(V_SUBTYPE_DOCUMENT);
end if;
end if;
V_ATTR := DBMS_XMLDOM.CREATEATTRIBUTE(V_DOCUMENT,'columns');
DBMS_XMLDOM.SETVALUE(V_ATTR,V_ATTRIBUTE_COUNT);
V_ATTR := DBMS_XMLDOM.SETATTRIBUTENODE(V_ROOT,V_ATTR);
-- Cache the type definition.
-- dbms_output.put_line('Cached Storage Model for "' || P_TYPE_OWNER || '.' || P_TYPE_NAME || '".');
insert into XDBPM.XDBPM_STORAGE_MODEL_CACHE (TYPE_NAME, TYPE_OWNER, EXTENDED_DEFINITION, STORAGE_MODEL) VALUES (P_TYPE_NAME, P_TYPE_OWNER, P_INCLUDE_SUBTYPES, V_TYPE_DEFINITION);
return V_TYPE_DEFINITION;
end;
function findStorageModel(P_TYPE_NAME VARCHAR2, P_TYPE_OWNER VARCHAR2, P_INCLUDE_SUBTYPES VARCHAR2 DEFAULT 'YES')
-- Find the Storage Model for the Base Type.
-- If the type is derived from another type we need the storage model of the Base Type
-- As storage models are calculated they are cached in the global temporary table XDBPM_STORAGE_MODEL_CACHE. This makes
-- the process much more efficient. A global temporary table is used to minimize memory usage.
return XMLType
as
V_STORAGE_MODEL XMLType;
V_STORAGE_MODEL_DOCUMENT DBMS_XMLDOM.DOMDOCUMENT;
V_STORAGE_MODEL_ROOT DBMS_XMLDOM.DOMELEMENT;
V_ATTRIBUTE_COUNT VARCHAR2(10);
begin
dbms_output.put_line('findStorageModel(' || G_DEPTH_COUNT || ') : Processing "' || P_TYPE_OWNER || '"."' || P_TYPE_NAME || '".' );
begin
SELECT STORAGE_MODEL
into V_STORAGE_MODEL
from XDBPM.XDBPM_STORAGE_MODEL_CACHE
where TYPE_NAME = P_TYPE_NAME
and TYPE_OWNER = P_TYPE_OWNER
and EXTENDED_DEFINITION = P_INCLUDE_SUBTYPES;
-- dbms_output.put_line('Resolved Storage Model from cache.');
exception
when no_data_found then
G_DEPTH_COUNT := G_DEPTH_COUNT + 1;
V_STORAGE_MODEL := getStorageModel(P_TYPE_NAME,P_TYPE_OWNER, P_INCLUDE_SUBTYPES);
G_DEPTH_COUNT := G_DEPTH_COUNT - 1;
when others then
raise;
end;
V_STORAGE_MODEL_DOCUMENT := DBMS_XMLDOM.NEWDOMDOCUMENT(V_STORAGE_MODEL);
V_STORAGE_MODEL_ROOT := DBMS_XMLDOM.GETDOCUMENTELEMENT(V_STORAGE_MODEL_DOCUMENT);
V_ATTRIBUTE_COUNT := DBMS_XMLDOM.GETATTRIBUTE(V_STORAGE_MODEL_ROOT,'columns');
dbms_output.put_line('findStorageModel : Attribute Count for "' || P_TYPE_OWNER || '"."' || P_TYPE_NAME || '" = ' || V_ATTRIBUTE_COUNT || '.' );
return V_STORAGE_MODEL;
end;
function analyzeStorageModel(P_COMPLEX_TYPE_NAME VARCHAR2, P_TYPE_NAME VARCHAR2, P_TYPE_OWNER VARCHAR2)
-- Generate a map showing the number of columns required to persist an instance of the SQL type.
return XMLType
as
V_STORAGE_MODEL XMLTYPE;
V_COUNT NUMBER := 0;
V_DOCUMENT DBMS_XMLDOM.DOMDOCUMENT;
V_ROOT DBMS_XMLDOM.DOMELEMENT;
V_ATTR DBMS_XMLDOM.DOMATTR;
V_MODEL DBMS_XMLDOM.DOMELEMENT;
V_TYPE_DEFINITION DBMS_XMLDOM.DOMELEMENT;
begin
V_STORAGE_MODEL := makeElement(P_COMPLEX_TYPE_NAME);
V_DOCUMENT := DBMS_XMLDOM.NEWDOMDOCUMENT(V_STORAGE_MODEL);
V_ROOT := DBMS_XMLDOM.GETDOCUMENTELEMENT(V_DOCUMENT);
V_ATTR := DBMS_XMLDOM.CREATEATTRIBUTE(V_DOCUMENT,'SQLType');
DBMS_XMLDOM.SETVALUE(V_ATTR,P_TYPE_NAME);
V_ATTR := DBMS_XMLDOM.SETATTRIBUTENODE(V_ROOT,V_ATTR);
V_ATTR := DBMS_XMLDOM.CREATEATTRIBUTE(V_DOCUMENT,'SQLTypeOwner');
DBMS_XMLDOM.SETVALUE(V_ATTR,P_TYPE_OWNER);
V_ATTR := DBMS_XMLDOM.SETATTRIBUTENODE(V_ROOT,V_ATTR);
V_TYPE_DEFINITION := DBMS_XMLDOM.GETDOCUMENTELEMENT(DBMS_XMLDOM.NEWDOMDOCUMENT(findStorageModel(P_TYPE_NAME, P_TYPE_OWNER, 'YES')));
V_TYPE_DEFINITION := DBMS_XMLDOM.MAKEELEMENT(DBMS_XMLDOM.IMPORTNODE(V_DOCUMENT,DBMS_XMLDOM.MAKENODE(V_TYPE_DEFINITION),TRUE));
V_TYPE_DEFINITION := DBMS_XMLDOM.MAKEELEMENT(DBMS_XMLDOM.APPENDCHILD(DBMS_XMLDOM.MAKENODE(V_ROOT),DBMS_XMLDOM.MAKENODE(V_TYPE_DEFINITION)));
V_ATTR := DBMS_XMLDOM.CREATEATTRIBUTE(V_DOCUMENT,'columns');
DBMS_XMLDOM.SETVALUE(V_ATTR,DBMS_XMLDOM.GETATTRIBUTE(V_TYPE_DEFINITION,'columns'));
V_ATTR := DBMS_XMLDOM.SETATTRIBUTENODE(V_ROOT,V_ATTR);
return V_STORAGE_MODEL;
end;
function analyzeStorageModel(P_COMPLEX_TYPE_NAME VARCHAR2)
return XMLTYPE
-- Generate a map showing the number of columns required to persist an instance of the complex type.
as
pragma autonomous_transaction;
V_SQLTYPE VARCHAR2(128);
V_SQLSCHEMA VARCHAR2(32);
V_RESULT XMLType;
begin
G_DEPTH_COUNT := 0;
select ct.XMLDATA.SQLTYPE, ct.XMLDATA.SQLSCHEMA
into V_SQLTYPE, V_SQLSCHEMA
from XDB.XDB$COMPLEX_TYPE ct, XDB.XDB$SCHEMA s
where ct.XMLDATA.NAME = P_COMPLEX_TYPE_NAME
and ref(s) = ct.XMLDATA.PARENT_SCHEMA
and s.XMLDATA.SCHEMA_OWNER = USER;
delete from XDBPM.XDBPM_STORAGE_MODEL_CACHE;
-- delete from XDBPM.XDBPM_STORAGE_MODEL;
V_RESULT := analyzeStorageModel(P_COMPLEX_TYPE_NAME,V_SQLTYPE,V_SQLSCHEMA);
COMMIT;
return V_RESULT;
exception
when no_data_found then
-- dbms_output.put_line('Unable to find SQLType mapping for complexType : "' || USER || '"."' || P_COMPLEX_TYPE_NAME || '".' );
return null;
when others then
raise;
end;
function analyzeSQLType(ATTR_NAME VARCHAR2, TARGET_TYPE_NAME VARCHAR2, TARGET_TYPE_OWNER VARCHAR2)
return XMLType
as
ROOT_NODE_NAME VARCHAR2(128);
ATTR_DETAIL XMLTYPE;
XPATH_EXPRESSION VARCHAR2(129);
CURSOR FIND_CHILD_ATTRS is
select ATTR_NAME, ATTR_TYPE_OWNER, ATTR_TYPE_NAME, INHERITED
from ALL_TYPE_ATTRS
where OWNER = TARGET_TYPE_OWNER
and TYPE_NAME = TARGET_TYPE_NAME
order by ATTR_NO;
CHILD_ATTR XMLTYPE;
ATTR_COUNT NUMBER := 0;
TEMP number;
COLLECTION_TYPE_NAME varchar2(256);
COLLECTION_TYPE_OWNER varchar2(256);
begin
-- -- dbms_output.put_line('Processing Attribute ' || ATTR_NAME || ' of ' || TARGET_TYPE_OWNER || '.' || TARGET_TYPE_NAME );
ATTR_DETAIL := makeElement(ATTR_NAME);
XPATH_EXPRESSION := '/' || ATTR_DETAIL.GETROOTELEMENT();
for ATTR in FIND_CHILD_ATTRS loop
begin
select ELEM_TYPE_NAME, ELEM_TYPE_OWNER
into COLLECTION_TYPE_NAME, COLLECTION_TYPE_OWNER
from ALL_COLL_TYPES
where TYPE_NAME = ATTR.ATTR_TYPE_NAME
and OWNER = ATTR.ATTR_TYPE_OWNER;
CHILD_ATTR := analyzeSQLType(ATTR.ATTR_NAME, COLLECTION_TYPE_NAME, COLLECTION_TYPE_OWNER );
ATTR_COUNT := ATTR_COUNT + CHILD_ATTR.extract('/' || CHILD_ATTR.GETROOTELEMENT() || '/@sqlAttrs').getNumberVal();
select appendChildXML(ATTR_DETAIL,XPATH_EXPRESSION,CHILD_ATTR)
into ATTR_DETAIL
from DUAL;
exception
when no_data_found then
begin
select 1
into TEMP
from ALL_TYPES
where TYPE_NAME = ATTR.ATTR_TYPE_NAME
and OWNER = ATTR.ATTR_TYPE_OWNER;
CHILD_ATTR := analyzeSQLType(ATTR.ATTR_NAME, ATTR.ATTR_TYPE_NAME, ATTR.ATTR_TYPE_OWNER );
ATTR_COUNT := ATTR_COUNT + CHILD_ATTR.extract('/' || CHILD_ATTR.GETROOTELEMENT() || '/@sqlAttrs').getNumberVal();
select appendChildXML(ATTR_DETAIL,XPATH_EXPRESSION,CHILD_ATTR)
into ATTR_DETAIL
from DUAL;
exception
when no_data_found then
ATTR_COUNT := ATTR_COUNT + 1;
end;
end;
end loop;
select insertChildXML(ATTR_DETAIL,XPATH_EXPRESSION,'@sqlAttrs',ATTR_COUNT)
into ATTR_DETAIL
from dual;
return ATTR_DETAIL;
end;
function analyzeComplexType(COMPLEX_TYPE VARCHAR2)
return XMLType
as
RESULT xmltype;
SQLTYPE varchar2(128);
SQLTYPE_OWNER varchar2(32);
begin
select SQLTYPE, SQLTYPE_OWNER
into SQLTYPE, SQLTYPE_OWNER
from USER_XML_SCHEMAS,
xmlTable
xmlnamespaces
'http://www.w3.org/2001/XMLSchema' as "xsd",
'http://xmlns.oracle.com/xdb' as "xdb"
'/xsd:schema/xsd:complexType'
passing Schema
columns
COMPLEX_TYPE_NAME varchar2(4000) path '@name',
SQLTYPE varchar2(128) path '@xdb:SQLType',
SQLTYPE_OWNER varchar2(32) path '@xdb:SQLSchema'
where COMPLEX_TYPE_NAME = COMPLEX_TYPE;
result := analyzeSQLType(COMPLEX_TYPE,SQLTYPE,SQLTYPE_OWNER);
select insertChildXML(RESULT,'/' || COMPLEX_TYPE,'@SQLType',SQLTYPE)
into result
from dual;
return result;
end;
function showSQLTypes(schemaFolder varchar2) return XMLType
is
xmlSchema XMLTYPE;
begin
select xmlElement
"TypeList",
xmlAgg
xmlElement
"Schema",
xmlElement
"ResourceName",
extractValue(res,'/Resource/DisplayName')
xmlElement
"complexTypes",
select xmlAgg
xmlElement
"complexType",
xmlElement
"name",
extractValue(value(XML),'/xsd:complexType/@name',XDB_NAMESPACES.XDBSCHEMA_PREFIXES)
xmlElement
"SQLType",
extractValue(value(XML),'/xsd:complexType/@xdb:SQLType',XDB_NAMESPACES.XDBSCHEMA_PREFIXES)
from table
xmlsequence
extract
xdburitype(p.path).getXML(),
'/xsd:schema/xsd:complexType',
XDB_NAMESPACES.XDBSCHEMA_PREFIXES
) xml
-- order by extractValue(value(XML),'/xsd:complexType/@name',XDB_NAMESPACES.XDBSCHEMA_PREFIXES)
).extract('/*')
into xmlSchema
from path_view p
where under_path(res,schemaFolder) = 1
order by extractValue(res,'/Resource/DisplayName');
return xmlSchema;
end;
procedure renameCollectionTable (XMLTABLE varchar2, XPATH varchar2, COLLECTION_TABLE_PREFIX varchar2)
as
SYSTEM_GENERATED_NAME varchar2(256);
COLLECTION_TABLE_NAME varchar2(256);
CLUSTERED_INDEX_NAME varchar2(256);
PARENT_INDEX_NAME varchar2(256);
RENAME_STATEMENT varchar2(4000);
begin
COLLECTION_TABLE_NAME := COLLECTION_TABLE_PREFIX || '_TABLE';
CLUSTERED_INDEX_NAME := COLLECTION_TABLE_PREFIX || '_DATA';
PARENT_INDEX_NAME := COLLECTION_TABLE_PREFIX || '_LIST';
select TABLE_NAME
into SYSTEM_GENERATED_NAME
from ALL_NESTED_TABLES
where PARENT_TABLE_NAME = XMLTABLE
and PARENT_TABLE_COLUMN = XPATH
and OWNER = USER;
RENAME_STATEMENT := 'alter table ' || USER || '."' || SYSTEM_GENERATED_NAME || '" rename to "' ||COLLECTION_TABLE_NAME || '"';
-- -- dbms_output.put_line(RENAME_STATEMENT);
execute immediate RENAME_STATEMENT;
begin
select INDEX_NAME
into SYSTEM_GENERATED_NAME
from ALL_INDEXES
where TABLE_NAME = COLLECTION_TABLE_NAME
and INDEX_TYPE = 'IOT - TOP'
and OWNER = USER;
RENAME_STATEMENT := 'alter index ' || USER || '."' || SYSTEM_GENERATED_NAME || '" rename to "' || CLUSTERED_INDEX_NAME || '"';
-- -- dbms_output.put_line(RENAME_STATEMENT);
execute immediate RENAME_STATEMENT;
exception
when NO_DATA_FOUND then
null;
end;
begin
select INDEX_NAME
into SYSTEM_GENERATED_NAME
from ALL_IND_columns
where COLUMN_NAME = XPATH
and TABLE_NAME = XMLTABLE
and TABLE_OWNER = USER;
RENAME_STATEMENT := 'alter index ' || USER || '."' || SYSTEM_GENERATED_NAME || '" rename to "' || PARENT_INDEX_NAME || '"';
-- -- dbms_output.put_line(RENAME_STATEMENT);
execute immediate RENAME_STATEMENT;
exception
when NO_DATA_FOUND then
null;
end;
end;
function processNestedTable(currentLevel in out number, currentNode in out XMLType, query SYS_REFCURSOR)
return XMLType
is
thisLevel number;
thisNode xmlType;
result xmlType;
begin
thisLevel := currentLevel;
thisNode := currentNode;
fetch query into currentLevel, currentNode;
if (query%NOTFOUND) then
currentLevel := -1;
end if;
while (currentLevel >= thisLevel) loop
-- Next Node is a decendant of sibling of this Node.
if (currentLevel > thisLevel) then
-- Next Node is a decendant of this Node.
result := processNestedTable(currentLevel, currentNode, query);
select xmlElement
"Collection",
extract(thisNode,'/Collection/*'),
xmlElement
"NestedCollections",
result
into thisNode
from dual;
else
-- Next node is a sibling of this Node.
result := processNestedTable(currentLevel, currentNode, query);
select xmlconcat(thisNode,result) into thisNode from dual;
end if;
end loop;
-- Next Node is a sibling of some ancestor of this node.
return thisNode;
end;
function printNestedTables(XML_TABLE varchar2)
return XMLType
is
query SYS_REFCURSOR;
result XMLType;
rootLevel number := 0;
rootNode xmlType;
begin
open query for
select level, xmlElement
"Collection",
xmlElement
"CollectionId",
PARENT_TABLE_COLUMN
) as XML
from USER_NESTED_TABLES
connect by PRIOR TABLE_NAME = PARENT_TABLE_NAME
start with PARENT_TABLE_NAME = XML_TABLE;
fetch query into rootLevel, rootNode;
result := processNestedTable(rootLevel, rootNode, query);
select xmlElement
"NestedTableStructure",
result
into result
from dual;
return result;
end;
function generateSchemaFromTable(P_TABLE_NAME varchar2, P_OWNER varchar2 default USER)
return XMLTYPE
as
xmlSchema XMLTYPE;
begin
select xmlElement
"xsd:schema",
xmlAttributes
'http://www.w3.org/2001/XMLSchema' as "xmlns:xsd",
'http://xmlns.oracle.com/xdb' as "xmlns:xdb"
xmlElement
"xsd:element",
xmlAttributes
'ROWSET' as "name",
'rowset' as "type"
xmlElement
"xsd:complexType",
xmlAttributes
'rowset' as "name"
xmlElement
"xsd:sequence",
xmlElement
"xsd:element",
xmlAttributes
'ROW' as "name",
table_name || '_T' as "type",
'unbounded' as "maxOccurs"
xmlElement
"xsd:complexType",
xmlAttributes
table_name || '_T' as "name"
xmlElement
"xsd:sequence",
xmlAgg(ELEMENT order by INTERNAL_COLUMN_ID)
into xmlSchema
from (select TABLE_NAME, INTERNAL_COLUMN_ID,
case
when DATA_TYPE in ('VARCHAR2','CHAR') then
xmlElement
"xsd:element",
xmlattributes
column_name as "name",
decode(NULLABLE, 'Y', 0, 1) as "minOccurs",
column_name as "xdb:SQLName",
DATA_TYPE as "xdb:SQLType"
xmlElement
"xsd:simpleType",
xmlElement
"xsd:restriction",
xmlAttributes
'xsd:string' as "base"
xmlElement
"xsd:maxLength",
xmlAttributes
DATA_LENGTH as "value"
when DATA_TYPE = 'NUMBER' then
xmlElement
"xsd:element",
xmlattributes
column_name as "name",
decode(NULLABLE, 'Y', 0, 1) as "minOccurs",
column_name as "xdb:SQLName",
DATA_TYPE as "xdb:SQLType"
xmlElement
"xsd:simpleType",
xmlElement
"xsd:restriction",
xmlAttributes
decode(DATA_SCALE, 0, 'xsd:integer', 'xsd:double') as "base"
xmlElement
"xsd:totalDigits",
xmlAttributes
DATA_PRECISION as "value"
when DATA_TYPE = 'DATE' then
xmlElement
"xsd:element",
xmlattributes
column_name as "name",
decode(NULLABLE, 'Y', 0, 1) as "minOccurs",
'xsd:date' as "type",
column_name as "xdb:SQLName",
DATA_TYPE as "xdb:SQLType"
when DATA_TYPE like 'TIMESTAMP%WITH TIME ZONE' then
xmlElement
"xsd:element",
xmlattributes
column_name as "name",
decode(NULLABLE, 'Y', 0, 1) as "minOccurs",
'xsd:dateTime' as "type",
column_name as "xdb:SQLName",
DATA_TYPE as "xdb:SQLType"
else
xmlElement
"xsd:element",
xmlattributes
column_name as "name",
decode(NULLABLE, 'Y', 0, 1) as "minOccurs",
'xsd:anySimpleType' as "type",
column_name as "xdb:SQLName",
DATA_TYPE as "xdb:SQLType"
end ELEMENT
from all_tab_cols c
where c.TABLE_NAME = P_TABLE_NAME
and c.OWNER = P_OWNER
group by TABLE_NAME;
return xmlSchema;
end;
function appendElementList(V_ELEMENT_LIST IN OUT XDB.XDB$XMLTYPE_REF_LIST_T, V_CHILD_ELEMENT_LIST XDB.XDB$XMLTYPE_REF_LIST_T) return XDB.XDB$XMLTYPE_REF_LIST_T;
function expandModel(P_MODEL XDB.XDB$MODEL_T) return XDB.XDB$XMLTYPE_REF_LIST_T;
function expandChoiceList(P_CHOICE_LIST XDB.XDB$XMLTYPE_REF_LIST_T) return XDB.XDB$XMLTYPE_REF_LIST_T;
function expandSequenceList(P_SEQUENCE_LIST XDB.XDB$XMLTYPE_REF_LIST_T) return XDB.XDB$XMLTYPE_REF_LIST_T;
function expandGroupList(P_GROUP_LIST XDB.XDB$XMLTYPE_REF_LIST_T) return XDB.XDB$XMLTYPE_REF_LIST_T;
function appendElementList(V_ELEMENT_LIST IN OUT XDB.XDB$XMLTYPE_REF_LIST_T, V_CHILD_ELEMENT_LIST XDB.XDB$XMLTYPE_REF_LIST_T)
return XDB.XDB$XMLTYPE_REF_LIST_T
as
begin
SELECT CAST
SET
CAST(V_ELEMENT_LIST as XDBPM.XMLTYPE_REF_TABLE_T)
MULTISET UNION
CAST(V_CHILD_ELEMENT_LIST as XDBPM.XMLTYPE_REF_TABLE_T)
as XDB.XDB$XMLTYPE_REF_LIST_T
into V_ELEMENT_LIST
from DUAL;
return V_ELEMENT_LIST;
end;
function expandModel(P_MODEL XDB.XDB$MODEL_T)
return XDB.XDB$XMLTYPE_REF_LIST_T
as
V_ELEMENT_LIST XDB.XDB$XMLTYPE_REF_LIST_T;
V_CHILD_ELEMENT_LIST XDB.XDB$XMLTYPE_REF_LIST_T;
begin
V_ELEMENT_LIST := XDB.XDB$XMLTYPE_REF_LIST_T();
if P_MODEL.ELEMENTS is not null then
V_ELEMENT_LIST := P_MODEL.ELEMENTS;
end if;
if (P_MODEL.CHOICE_KIDS is not NULL) then
V_CHILD_ELEMENT_LIST := expandChoiceList(P_MODEL.CHOICE_KIDS);
V_ELEMENT_LIST := appendElementList(V_ELEMENT_LIST,V_CHILD_ELEMENT_LIST);
end if;
if (P_MODEL.SEQUENCE_KIDS is not NULL) then
V_CHILD_ELEMENT_LIST := expandSequenceList(P_MODEL.SEQUENCE_KIDS);
V_ELEMENT_LIST := appendElementList(V_ELEMENT_LIST,V_CHILD_ELEMENT_LIST);
end if;
-- Process ANYS
if (P_MODEL.GROUPS is not NULL) then
V_CHILD_ELEMENT_LIST := expandGroupList(P_MODEL.GROUPS);
V_ELEMENT_LIST := appendElementList(V_ELEMENT_LIST,V_CHILD_ELEMENT_LIST);
end if;
return V_ELEMENT_LIST;
end;
function expandChoiceList(P_CHOICE_LIST XDB.XDB$XMLTYPE_REF_LIST_T)
return XDB.XDB$XMLTYPE_REF_LIST_T
as
V_ELEMENT_LIST XDB.XDB$XMLTYPE_REF_LIST_T;
V_CHILD_ELEMENT_LIST XDB.XDB$XMLTYPE_REF_LIST_T;
cursor getChoices is
select c.XMLDATA MODEL
from XDB.XDB$CHOICE_MODEL c, TABLE(P_CHOICE_LIST) cl
where ref(c) = value(cl);
begin
V_ELEMENT_LIST := XDB.XDB$XMLTYPE_REF_LIST_T();
for c in getChoices loop
V_CHILD_ELEMENT_LIST := expandModel(c.MODEL);
V_ELEMENT_LIST := appendElementList(V_ELEMENT_LIST,V_CHILD_ELEMENT_LIST);
end loop;
return V_ELEMENT_LIST;
end;
function expandSequenceList(P_SEQUENCE_LIST XDB.XDB$XMLTYPE_REF_LIST_T)
return XDB.XDB$XMLTYPE_REF_LIST_T
as
V_ELEMENT_LIST XDB.XDB$XMLTYPE_REF_LIST_T;
V_CHILD_ELEMENT_LIST XDB.XDB$XMLTYPE_REF_LIST_T;
cursor getSequences is
select s.XMLDATA MODEL
from XDB.XDB$SEQUENCE_MODEL s, TABLE(P_SEQUENCE_LIST) sl
where ref(s) = value(sl);
begin
V_ELEMENT_LIST := XDB.XDB$XMLTYPE_REF_LIST_T();
for s in getSequences loop
V_CHILD_ELEMENT_LIST := expandModel(s.MODEL);
V_ELEMENT_LIST := appendElementList(V_ELEMENT_LIST,V_CHILD_ELEMENT_LIST);
end loop;
return V_ELEMENT_LIST;
end;
function expandGroupList(P_GROUP_LIST XDB.XDB$XMLTYPE_REF_LIST_T)
return XDB.XDB$XMLTYPE_REF_LIST_T
as
V_ELEMENT_LIST XDB.XDB$XMLTYPE_REF_LIST_T;
V_CHILD_ELEMENT_LIST XDB.XDB$XMLTYPE_REF_LIST_T; V_MODEL XDB.XDB$MODEL_T;
cursor getGroups is
SELECT CASE
-- Return The MODEL Definition for the CHOICE, ALL or SEQUENCE
WHEN gd.XMLDATA.ALL_KID is not NULL
THEN ( SELECT a.XMLDATA from XDB.XDB$ALL_MODEL a where ref(a) = gd.XMLDATA.ALL_KID)
WHEN gd.XMLDATA.SEQUENCE_KID is not NULL
THEN ( SELECT s.XMLDATA from XDB.XDB$SEQUENCE_MODEL s where ref(s) = gd.XMLDATA.SEQUENCE_KID)
WHEN gd.XMLDATA.CHOICE_KID is not NULL
THEN ( SELECT c.XMLDATA from XDB.XDB$CHOICE_MODEL c where ref(c) = gd.XMLDATA.CHOICE_KID)
END MODEL
FROM XDB.XDB$GROUP_DEF gd, XDB.XDB$GROUP_REF gr, TABLE(P_GROUP_LIST) gl
WHERE ref(gd) = gr.XMLDATA.GROUPREF_REF
and ref(gr) = value(gl);
begin
V_ELEMENT_LIST := XDB.XDB$XMLTYPE_REF_LIST_T();
for g in getGroups loop
V_CHILD_ELEMENT_LIST := expandModel(g.MODEL);
V_ELEMENT_LIST := appendElementList(V_ELEMENT_LIST,V_CHILD_ELEMENT_LIST);
end loop;
return V_ELEMENT_LIST;
end;
function getComplexTypeElementList(P_COMPLEX_TYPE_REF REF XMLTYPE)
return XDB.XDB$XMLTYPE_REF_LIST_T
as
V_MODEL XDB.XDB$MODEL_T;
V_BASE_TYPE REF XMLTYPE;
V_ELEMENT_LIST XDB.XDB$XMLTYPE_REF_LIST_T := XDB.XDB$XMLTYPE_REF_LIST_T();
begin
SELECT ct.XMLDATA.BASE_TYPE,
CASE
-- Return The MODEL Definition for the CHOICE, ALL or SEQUENCE
WHEN ct.XMLDATA.ALL_KID is not NULL
THEN ( SELECT a.XMLDATA from XDB.XDB$ALL_MODEL a where ref(a) = ct.XMLDATA.ALL_KID)
WHEN ct.XMLDATA.SEQUENCE_KID is not NULL
THEN ( SELECT s.XMLDATA from XDB.XDB$SEQUENCE_MODEL s where ref(s) = ct.XMLDATA.SEQUENCE_KID)
WHEN ct.XMLDATA.CHOICE_KID is not NULL
THEN ( SELECT c.XMLDATA from XDB.XDB$CHOICE_MODEL c where ref(c) = ct.XMLDATA.CHOICE_KID)
WHEN ct.XMLDATA.GROUP_KID is not NULL
-- COMPLEXTYPE is based on a GROUP.
THEN (
-- RETURN The CHOICE, ALL or SEQUENCE for GROUP
SELECT CASE
WHEN gd.XMLDATA.ALL_KID is not NULL
THEN ( SELECT a.XMLDATA from XDB.XDB$ALL_MODEL a where ref(a) = gd.XMLDATA.ALL_KID)
WHEN gd.XMLDATA.SEQUENCE_KID is not NULL
THEN ( SELECT s.XMLDATA from XDB.XDB$SEQUENCE_MODEL s where ref(s) = gd.XMLDATA.SEQUENCE_KID)
WHEN gd.XMLDATA.CHOICE_KID is not NULL
THEN ( SELECT c.XMLDATA from XDB.XDB$CHOICE_MODEL c where ref(c) = gd.XMLDATA.CHOICE_KID)
END
FROM XDB.XDB$GROUP_DEF gd, xdb.xdb$GROUP_REF gr
WHERE ref(gd) = gr.XMLDATA.GROUPREF_REF
and ref(gr) = ct.XMLDATA.GROUP_KID
-- WHEN ct.XMLDATA.COMPLEXCONTENT.RESTRICTION.ALL_KID is not NULL
-- THEN ( SELECT a.XMLDATA from XDB.XDB$ALL_MODEL a where ref(a) = ct.XMLDATA.COMPLEXCONTENT.RESTRICTION.ALL_KID)
-- WHEN ct.XMLDATA.COMPLEXCONTENT.RESTRICTION.SEQUENCE_KID is not NULL
-- THEN ( SELECT s.XMLDATA from XDB.XDB$SEQUENCE_MODEL s where ref(s) = ct.XMLDATA.COMPLEXCONTENT.RESTRICTION.SEQUENCE_KID)
-- WHEN ct.XMLDATA.COMPLEXCONTENT.RESTRICTION.CHOICE_KID is not NULL
-- THEN ( SELECT c.XMLDATA from XDB.XDB$CHOICE_MODEL c where ref(c) = ct.XMLDATA.COMPLEXCONTENT.RESTRICTION.CHOICE_KID)
-- WHEN ct.XMLDATA.COMPLEXCONTENT.RESTRICTION.GROUP_KID is not NULL
-- -- COMPLEXTYPE is based on a GROUP.
-- THEN (
-- -- RETURN The CHOICE, ALL or SEQUENCE for GROUP
-- SELECT CASE
-- WHEN gd.XMLDATA.ALL_KID is not NULL
-- THEN ( SELECT a.XMLDATA from XDB.XDB$ALL_MODEL a where ref(a) = gd.XMLDATA.ALL_KID)
-- WHEN gd.XMLDATA.SEQUENCE_KID is not NULL
-- THEN ( SELECT s.XMLDATA from XDB.XDB$SEQUENCE_MODEL s where ref(s) = gd.XMLDATA.SEQUENCE_KID)
-- WHEN gd.XMLDATA.CHOICE_KID is not NULL
-- THEN ( SELECT c.XMLDATA from XDB.XDB$CHOICE_MODEL c where ref(c) = gd.XMLDATA.CHOICE_KID)
-- END
-- FROM XDB.XDB$GROUP_DEF gd, xdb.xdb$GROUP_REF gr
-- WHERE ref(gd) = gr.XMLDATA.GROUPREF_REF
-- and ref(gr) = ct.XMLDATA.COMPLEXCONTENT.RESTRICTION.GROUP_KID
WHEN ct.XMLDATA.COMPLEXCONTENT.EXTENSION.ALL_KID is not NULL
THEN ( SELECT a.XMLDATA from XDB.XDB$ALL_MODEL a where ref(a) = ct.XMLDATA.COMPLEXCONTENT.EXTENSION.ALL_KID)
WHEN ct.XMLDATA.COMPLEXCONTENT.EXTENSION.SEQUENCE_KID is not NULL
THEN ( SELECT s.XMLDATA from XDB.XDB$SEQUENCE_MODEL s where ref(s) = ct.XMLDATA.COMPLEXCONTENT.EXTENSION.SEQUENCE_KID)
WHEN ct.XMLDATA.COMPLEXCONTENT.EXTENSION.CHOICE_KID is not NULL
THEN ( SELECT c.XMLDATA from XDB.XDB$CHOICE_MODEL c where ref(c) = ct.XMLDATA.COMPLEXCONTENT.EXTENSION.CHOICE_KID)
WHEN ct.XMLDATA.COMPLEXCONTENT.EXTENSION.GROUP_KID is not NULL
-- COMPLEXTYPE is based on a GROUP.
THEN (
-- RETURN The CHOICE, ALL or SEQUENCE for GROUP
SELECT CASE
WHEN gd.XMLDATA.ALL_KID is not NULL
THEN ( SELECT a.XMLDATA from XDB.XDB$ALL_MODEL a where ref(a) = gd.XMLDATA.ALL_KID)
-
TS3899 how do i control or limit the number of email messages in my inbox?
how do i control or limit the number of email messages in my inbox? i used to be able to pick the number of emails on my phone 100, 500, 1000, or 1500 etc. now all my (new inbox) emails are coming to me at once. how can i control it? i have went through my entire phone and i cant find way to filter??? HELP
That function was removed in iOS 7.
-
HT201320 How do I change the number of email messages I can view in the new iOS.
I have the new IOS on my phone and can't find the setting that allows me to change the number of email messages I can view. Anyone know?
You should have 200 undos, and can verify this in the bottom left flyout >> show >> number of undos (this show shows many undos you have cahced, not your max amount, will max out at 200)
You can try changing the 200 in the illustrator preferences, by using a text editor, saving and then booting illustrator. Not sure this is a great idea, as 200 should be plenty, but let us know your results if you try.
/undoDepth 5
/maxUndoDepth 200
Older versions of Illustrator let you change this in the preferences, but they must have decied that hitting CMD Z more than 200 times is not a good way to spend your afternoon. -
Maximum number of emails supported in a folder
Hi Guys,
What is the maximum number of emails you can in one folder on iPhone 5S?
We have a user whose Exchange mailbox is around 16.5GB and he has about 93K items overall and around 20K in the sent items. Intermittently he loses emails from his Sent Items going back to March 2010. Then it takes days to re-sync the Sent Items folders. This happens on his iPhone 5S(iPhone6C2/1104.257) and iPad2C1, we use Exchange Activesync.
ThanksThe theoretical limit is the NTFS volume limit. This is provided in the below article.
NTFS Physical Structure
However the practical limit depends on your application and business scenario. You can read about FILESTREAM and FileTable internals and about performance considerations from the below excellent article
Microsoft SQL Server 2012 Internals: Special Storage - Kalen Delaney and Craig Freedman
Krishnakumar S
Maybe you are looking for
-
can we use join in update statement? here is the query which is giving me error UPDATE pol_int_name_multiple_v SET PMV.client_seq_nbr_i = 1 FROM pol_int_name_multiple_v PMV JOIN pol_int_name PIV ON piv.int_name_id = pmv.int_na
-
Transfering cFolders Docs to DMS via Collaboration tab in cProjects 4.5
Hi Experts, I am trying to move documents between cFolders and DMS using the the "collaboration" tab in cProjects. The steps I am following are as follows. 1. Created a link to a DMS document structure from "SAP DMS" tab in cProjects 2. Assigned a co
-
Project window darkens when trying to add voiceover in iMovie '09
I am trying to add a voiceover to a short video in iMovie '09, but every time I open the Voiceover window, the project window darkens so I cannot click on the clip where I want the voiceover to begin. I have looked at all the tutorials but can't figu
-
Hi Evrybdy Can you help me to view accounting document. when I go through Vendor open items and select one open document and see document overview, The layout of document overview is ALV classic list (Printable format) Now I want to view next open it
-
Hello! Can you help me? I can´t share quots from iBooks to Facebook because there is no button "facebook". Interesting, when I delete app Facebook, this button in on and I can share quots. But when I instal app Facebook, this button is off. All setti