ORA-20001: Please define the item validation organization in the Parameters

When Manual Inter company invoice is created following error is coming up and as per ‘Metalink’ the solution for this is to select correct operating unit for ‘Item Validation Organization’. Since there are no items involved [Standard Memo Lines used] I don’t need to setup this and so the solution don't work.
ORA-20001: Please define the item validation organization in the Parameters window in Order Management
ORA-06512: at “APPS.APP_EXCEPTION”, line 72
ORA-06512: at “APPS.ARP_TAX”, line 8216
ORA-06512: at “APPS.ARP_TAX”, line 8361
ORA-06512: at line 1
So can anyone help to avoid this error....
Edited by: 936837 on Aug 8, 2012 1:04 PM

936837 wrote:
When Manual Inter company invoice is created following error is coming up and as per ‘Metalink’ the solution for this is to select correct operating unit for ‘Item Validation Organization’. Since there are no items involved [Standard Memo Lines used] I don’t need to setup this and so the solution don't work.
ORA-20001: Please define the item validation organization in the Parameters window in Order Management
ORA-06512: at “APPS.APP_EXCEPTION”, line 72
ORA-06512: at “APPS.ARP_TAX”, line 8216
ORA-06512: at “APPS.ARP_TAX”, line 8361
ORA-06512: at line 1Please see these docs.
Error: Please define the item validation organization in the Parameters window in Order Management [ID 1163873.1]
Cannot Setup Salespersons [ID 344082.1]
Thanks,
Hussein

Similar Messages

  • QP: Item validation Organization & OE: Item validation Organization

    Hi All,
    Can you please tell me the difference between below two profile options.
    1. QP: Item validation Organization
    2. OE: Item validation Organization
    Thanks in advance.

    Naveed
    1) You can use the child org as item validation org but typically, it is better to use the master org for this. This will help if you start using more child organizations.
    2) No.
    3) No effect
    Hope this helps,
    Sandeep Gandhi

  • Item Validation Organization is not Appearing in LOV in profile options

    Dear All,
    Item Validation Organization is not Appearing in LOV of the Profile options.
    OE: Item Validation Organization
    QP : Item Validation Organization
    Regards,
    John

    Hi,
    Enable profile 'FND: Personalization Seeding Mode', clear the cache and check if this solves your problem.
    --Sushant                                                                                                                                                                                                                                                           

  • OE:Item Validation Organization - view only your Org Items in SO Item LOV

    HI All,
    I am trying to set a profile so that I see only the items in my Organization in the Sales Order Item LOV in Order Management when I create a sales order.
    Appreciate your input to achieve this.
    Thanks,
    Jo.

    Thanks for this information...
    We can specify only one Item validation org for one operating unit (OU) in Order management as well as in Purchasing.
    Say we have total 5 orgs in OU, one is ITM item master and others are ORG1, ORG2, ORG3 and ORG4. Suppose ORG1 is an Item validation org...
    Now if Oracle is going to validate attribute values against ORG1 only then problem may come... in case few attributes are controlled at organization level then same attribute can have different values in different orgs say the attributes are Purchasable and Customer order enables..
    If the item is not purchasable and not Customer Order enabled in ORG1 (Item validation Org).. then do you mean it can't be sold or purchased in that OU??... I don't think so...
    So I want to know what is the significance of having Item Validation Organization...ac
    Thanks
    Devendra Gulve
    http://functionalguy.blogspot.com
    Edited by: Deven.G. on Sep 2, 2010 12:04 PM

  • Error Message = ORA-20001: Please make sure all system pa

    Hi,
    We have 2 business group one default setup business group and another one new one.
    There is a common custom workflow for timesheet approval. This workflow process working without any problem with default business group (setup Business Group). But new businees group giving following error:
    Error in Workflow PMSTSAPR/50112*156 ORA-20001: Please make sure all system pa
    Item Type = PMSTSAPR
    Item Key = 50112*156
    User Key =13-OCT-01
    Error Name = -20001
    Error Message = ORA-20001: Please make sure all system pa
    Error Stack =
    XXPM_WF_TS_APPROVAL_PKG.start_sub_approval_workflow p type PMSTSAPR pkey 50112*156 item type PMSTSAPR item key 50112*156/1(PMSTSAPR, 50112*156/1)
    XXPM_WF_TS_APPROVAL_PKG.Find_Approver - 8 (PMSTSAPR, 50112*156)
    Wf_Engine_Util.Function_Call(XXPM_WF_TS_APPROVAL_PKG.FIND_APPROVER, PMSTSAPR, 50112*156, 173547, RUN)
    Activity Id = 173547
    Activity Label = TIMESHEET_APPROVAL_PROCESS:START_CHILD_PROCESS
    Result Code = #EXCEPTION
    Notification Id =
    Assigned User =
    I will appreciate, if somebody can help me .
    Also this workflow process are submitting from Oracle Forms.
    Regards
    Satheesh Kumar

    Problem solved,
    Custom database function raised this error

  • ORA-20001: GET_BLOCK Error. ORA-20001: Execution of the statement was unsuc

    Hi All,
    I have exported a application and after that imported and tried to install it then i am getting this error:
    ORA-20001: GET_BLOCK Error. ORA-20001: Execution of the statement was unsuccessful. ORA-06550: line 5, column 1: PLS-00306: wrong number or types of arguments in call to 'CREATE_REPORT_COLUMNS' ORA-06550: line 5, column 1: PL/SQL: Statement ignored <pre>declare s varchar2(32767) := null; begin s := null; wwv_flow_api.create_report_columns ( p_id=&gt; 29524721731534348 + wwv_flow_api.g_id_offset, p_region_id=&gt; 29524015959534345 + wwv_flow_api.g_id_offset, p_flow_id=&gt; wwv_fl
    History which happen:
    everything was working fine in my workspace but 2 days back one of team member created customer demo application in the same work space so login was also failing and after struggling oneday i got that my authentication function was get overwritten by the demo user authentication so again i chaned by my bakup function now authentication is working but when i export my new developed application and tried to replace the existing application then i am getting the erroe which i have mention before.
    1: I tried to replace by existing one
    2: i tried to assign new application id
    nothing is working so is it problem occues due to new demo application creation which i have deleted or other problem if other then how to solve if by demo then what i need to do .
    But all applications are working well not able to install which i need to do with new developed application.
    Please help me i am in tough situation.
    Thanks in advance,
    Amit

    Amit,
    The next useful test would be to run the file in SQL*Plus, connected as the application parsing schema. If it works, you will have imported the application. After that, please send me the file ([email protected]) and I'll figure out where the trouble is. If it fails in SQL*Plus, try to isolate the failing block. You'll get a pretty good idea by the prompts echoed to the output indicating the import progress.
    Scott

  • How can I define the parameters in IPC formula?

    Hi IPC experts,I'm fresh on IPC.
    Now,I have a requirement,and need to alter an IPC formula.
    I need to post a parameter to IPC,and I have below two proposals,but both of them are denied.
    1.add a field catalog,and the system will add a new field in structure CRMT_ACS_I_COM.To finish the MTP,we need to process/remove all the pending BDOCs in middleware.We have global business,and there are always some BDOCs being processed,so it's almost impossible to clear it,so the risk is too high.
    2.Export the data to database in ABAP and then access them by calling a function in the JAVA codings in the formula.
       To achieve this goal,we'll have to use JCO to access ABAP function module,but it seems forbidden according to SAP.
    Now,I have a proposal,whethe we can add a new parameter in the formula class??
    We have below two parameters in the formula:
    import com.sap.spe.pricing.transactiondata.userexit.IPricingConditionUserExit;
    import com.sap.spe.pricing.transactiondata.userexit.IPricingItemUserExit;
    import com.sap.spe.pricing.transactiondata.userexit.ValueFormulaAdapter;
    public class Z_VAL_975_GrossStartingPoint extends ValueFormulaAdapter {
         public BigDecimal overwriteConditionValue(
         IPricingItemUserExit pricingItem,
         IPricingConditionUserExit pricingCondition) {
    Can anybody suggest how I can add a third parameter and how to post value to it in ABAP??
    I mean a parameter created by ourselves,not a standard parameter.
    Thanks in advance.

    Hi jerry,
    I think you need to pass some custom paramater to ipc which is required in pricing.
    Then you can add a new parameter in the field catalog attribute and to pass the value to the IPC you have to implement the badi CRM_COM_COND_BADI.
    Thanks and Regards
    shanto aloor

  • Is it possible to define the parameters of auto-sized text?

    Hello,
    I'm working on creating a form that will create small signs with variable text sizes. The font value is currently set to "0" but I'm concerned that my end user will add so much text that the sign becomes unreadable.
    Is there a way to create limits on font size within a text field? Can I put a range in the value field to achieve what I am looking for? Or is there a better way?
    Thank you,
    Erin

    My apologies for not coming back to you.
    After a 3 hour phone call and several weeks of emails, I received the following helpful information:
    "I took a look at your form and quickly noticed a few things. To start, the form you were working on was using PDF artwork since it was imported from an existing AcroForm, this limits the objects and functions you can use, and for that reason I have to recreate the form into a Static XFA form. Once that was done I tackled the font size 0 issue. By setting the font size to 0, you let Acrobat/Reader decide what actual font size should be used, but the only problem you face by enabling multiple lines is that Acrobat/Reader doesn't know when it should stop shrinking the font and start writing to a new line. This is a limitation of the feature, and not a whole lot can be done.
    What you can do on the other hand is to script your own logic. In the attached form I created a new formFunction container with a bit of logic. The function stored inside of this container gets called by all of the fields on the form when the document is opened, and every time the field is exited. This logic allows the fields to use font size 0 which auto sizes the font up to a certain point, but after 30 characters (when the font starts being to small), we set the font to a default 10pt and enable multi lines. Using this logic, you should be able to implement this on your forms."

  • Error ORA-20001: The payment cannot be fully paid with the monetary units a

    Hi All,
    I have got the following error, when I am trying to run Pre-Payments. The error is coming for employees who are having Payment Method as "Cash".....
    Error ORA-20001: The payment cannot be fully paid with the monetary units available.
    ORA-06512: at "APPS.HR_UTILITY", line 937
    ORA-06512: at "APPS.HR_PRE_PAY", line 1454
    ORA-06512: at "APPS.HR_PRE_PAY", line 1944
    I am not sure why that error is coming.
    Can anyone tell me what needs to be done for rectifying that error.....
    Regards,
    Phani

    What is the application release?
    Please see these docs.
    ORA-20001: APP-06442 The Payment Cannot Be Fully Paid With The Monetary Units Available Processing PrePayments [ID 250010.1]
    ORA-20001: The Payment Cannot Be Fully Paid With The Monetary Units Available [ID 1226804.1]
    Pre-payments Error when Paying an Employee in Currency other that USD or CA : The Payment Cannot be Fully Paid with the Monetary Units [ID 249746.1]
    Thanks,
    Hussein

  • ORA-20001 GET_BLOCK-ERROR during the installation of an application

    hi people,
    I' ve got the following error during the installation of an application in apex 2.2.
    ORA-20001: GET_BLOCK Error. ORA-20001: Execution of the statement was unsuccessful. ORA-02047: cannot join the distributed transaction in progress <pre>begin execute immediate 'alter session set nls_numeric_characters='''||wwv_flow_api.g_nls_numeric_chars||'''';end;</pre>
    Can anybody help me?
    Message was edited by:
    user512746

    hi,
    db-version is oracle 10g r2
    os windows server 2003
    the error occured when two ore more people working in their workspaces but not when only one person working in his workspace
    Message was edited by:
    user512746
    Message was edited by:
    user512746

  • ORA-20001 Error when creating a new application

    Hi,
    I am trying to create a new application of an existing table in the database and I get the following error. The application is created using the wizard (app type Database, from scratch, Report and Form page)
    ORA-20001: Unable to create modules. ORA-20001: Create pages error. ORA-20001: Unable to create form page. ORA-20001: Error page=2 item="P2_NON_ORACLE_EMPLOYEE_SPEAKER" id="1975288532127294112" ORA-20001: Error page=2 item="P2_NON_ORACLE_EMPLOYEE_SPEAKER" id="1975288532127294112" has same name as existing application-level item. ORA-0000: normal, successful completion
    The table I am creating the app on is defined like this:
    CREATE TABLE  "TABLE_1"
       (    "ID" NUMBER,
            "SESSION_EXTERNAL_PAPER" VARCHAR2(30),
            "OWNER_CFP_SUBMITTER1_FULL_NA" VARCHAR2(255),
            "OWNER_CFP_SUBMITTER1_COMPANY" VARCHAR2(255),
            "STATUS" VARCHAR2(30),
            "SESSION_ID" NUMBER,
            "TITLE" VARCHAR2(255),
            "ABSTRACT" VARCHAR2(4000),
            "SESSION_TYPE" VARCHAR2(30),
            "SESSION_CATEGORY" VARCHAR2(30),
            "STREAM" VARCHAR2(30),
            "PRIMARY_TRACK" VARCHAR2(255),
            "OPTIONAL_TRACK" VARCHAR2(255),
            "CROSS_STREAM_TRACK" VARCHAR2(30),
            "SUPPORTING_VIDEO" VARCHAR2(4000),
            "ATTENDEE_ROLE" VARCHAR2(255),
            "TO_RATING" VARCHAR2(30),
            "TO_COMMENTS" VARCHAR2(4000),
            "COMMENTS" VARCHAR2(4000),
            "ORACLE_PARTNERNETWORK" VARCHAR2(30),
            "IS_YOUR_OPN_MEMBERSHIP_UNDER_A" VARCHAR2(255),
            "ORACLE_PARTNER_TYPE" VARCHAR2(255),
            "OPN_MEMBERSHIP_LEVEL" VARCHAR2(30),
            "ORACLE_REGION_BASED" VARCHAR2(30),
            "ORACLE_VALIDATED_INTEGRATION" VARCHAR2(30),
            "HAS_YOUR_COMPANY_ACHIEVED_SPEC" VARCHAR2(4000),
            "PLEASE_DESCRIBE_THE_VALUE_OF_O" VARCHAR2(4000),
            "INCLUDE_CASE_STUDY" VARCHAR2(30),
            "PROVIDE_NAME_OF_THE_CUSTOMER_F" VARCHAR2(255),
            "PLEASE_PROVIDE_A_BRIEF_DESCRIP" VARCHAR2(4000),
            "NON_ORACLE_EMPLOYEE_SPEAKER1_F" VARCHAR2(255),
            "NON_ORACLE_EMPLOYEE_SPEAKER1_C" VARCHAR2(255),
            "ORACLE_EMPLOYEE_SPEAKER1_FULL" VARCHAR2(255),
            "ORACLE_EMPLOYEE_SPEAKER1_COMPA" VARCHAR2(255),
            "NON_ORACLE_EMPLOYEE_SPEAKER2_F" VARCHAR2(255),
            "NON_ORACLE_EMPLOYEE_SPEAKER2_C" VARCHAR2(255),
            "ORACLE_EMPLOYEE_SPEAKER2_FULL" VARCHAR2(255),
            "ORACLE_EMPLOYEE_SPEAKER2_COMPA" VARCHAR2(255),
            "NON_ORACLE_EMPLOYEE_SPEAKER3_F" VARCHAR2(255),
            "NON_ORACLE_EMPLOYEE_SPEAKER3_C" VARCHAR2(255),
            "ORACLE_EMPLOYEE_SPEAKER3_FULL" VARCHAR2(255),
            "ORACLE_EMPLOYEE_SPEAKER3_COMPA" VARCHAR2(255),
            "NON_ORACLE_EMPLOYEE_SPEAKER4_F" VARCHAR2(255),
            "NON_ORACLE_EMPLOYEE_SPEAKER4_C" VARCHAR2(255),
            "ORACLE_EMPLOYEE_SPEAKER4_FULL" VARCHAR2(255),
            "ORACLE_EMPLOYEE_SPEAKER4_COMPA" VARCHAR2(255),
            "CREATED" DATE,
            "CREATED_BY" VARCHAR2(50),
            "LAST_UPDATE" DATE,
            "LAST_UPDATED_BY" VARCHAR2(50),
             CONSTRAINT "OOW_PAPER_PK" PRIMARY KEY ("ID") ENABLE
       ) ;I am using APEX version 4.0.2.00.07
    Any idea what could be wrong and what can be done to resolve the problem?
    Cheers,
    Andy

    Thanks! Never thought of that.
    --Andy                                                                                                                                                                                                                       

  • Whats Item validation org's significance?

    Hi
    I was trying to create a Sales Order and I was not able to find my item from the LOV. I was then told by a friend of mine that the item validation org parameter in OM setup>parameters shld be set to the item validation org.
    My qns are whts the diff between item validation org and item master org?
    Can they be same , if so wht are the disadvantages?
    why at all its reqd? (one answer I got was that to increase perf of OM module it helps restricting huge item list as in a master org and gives subset of saleable items alone)
    Thnx
    Partha

    Thanks for this information...
    We can specify only one Item validation org for one operating unit (OU) in Order management as well as in Purchasing.
    Say we have total 5 orgs in OU, one is ITM item master and others are ORG1, ORG2, ORG3 and ORG4. Suppose ORG1 is an Item validation org...
    Now if Oracle is going to validate attribute values against ORG1 only then problem may come... in case few attributes are controlled at organization level then same attribute can have different values in different orgs say the attributes are Purchasable and Customer order enables..
    If the item is not purchasable and not Customer Order enabled in ORG1 (Item validation Org).. then do you mean it can't be sold or purchased in that OU??... I don't think so...
    So I want to know what is the significance of having Item Validation Organization...ac
    Thanks
    Devendra Gulve
    http://functionalguy.blogspot.com
    Edited by: Deven.G. on Sep 2, 2010 12:04 PM

  • Updating Item Master Organization

    Dear All,
    We have two Business Group in US and in Canada. We have defined two Item Master Organization; one for US and the other for Canada. Now we want to convert it into single Item Master Organization.
    What are the implications? Is it advisable? Is there any document on the impact on the existing setups?
    Regards
    Merlin Rajesh

    I managed to import the default warehouse, using the Add and Update Items option. The items have more that one warehouse, and am trying the same this only that this time no update is going through though it says successful.
    The templates look as follows
    OITM template
    Itemcode 
    AA30990
    BB909900
    Itemwarehouse Template
    ParentKey   LineNum    WhseCode
    1                     1                 RUH
    2                      1                 RUH

  • ORA-20001 When trying to default page element to sysdate

    Hello,
    I have a master detail with last updated in the detail that I want to autopopulate based on sysdate.
    To do that I have Tabular Form Attributes set to sysdate and default type PL/SQL Expression or function.
    The display as is set to "Display as Text(saves state).
    I would like to format the date which I do with Column Attributes and then specify the Number Data Format.
    When I click add row in the detai part of the pagethe date is displayed as desired however then I try and
    apply the changes (save the page) I get ORA-20001: Found invalid date value, please verify date format. (Row 2)
    I have tried formatting the date in the PL/SQL expression with TO_DATE(SYSDATE,'DD-MON-YYYY HH24:MI')
    with the same result.
    If I change the element to Text Field the date is saved correctly however I don't want the user to edit the
    feild.
    Any suggestions? Using APEX 4.1

    I have the same issue.
    1. DEFAULT=SYSDATE when using format mask='DD-MON-YYYY HH24:MI:SS' causes the time portion to appear but ORA-20001 when submitting the row.
    2. Since the base column datatype is DATE, a simple to_char(SYSDATE,'DD-MON-YYYY HH24:MI:SS') obviously causes ORA-01790: expression must have same datatype as corresponding expression.
    3. A to_date(to_char(SYSDATE,'DD-MON-YYYY HH24:MI:SS'),'DD-MON-YYYY HH24:MI:SS') leads to the same error: ORA-20001: Found invalid date value, please verify date format.
    Does anyone know the trick?

  • JAEHYLEE (R12 FND) R12 Upgrade후에 ORA-20001 FND_CANT_INSERT_USER_ROLE

    Purpose
    R12 Upgrade후에 System admin에서 권한을 assign할려고 할때
    GET ORA-20001 FND_CANT_INSERT_USER_ROLE 에러가 자주 발생 합니다.
    Cause
    Upgrade to 12.0.2.
    ORA-20001 error는 이미 권한이 할당되어 있을때 발생합니다.
    The ORA-20001 error is often caused by the responsibility already being assigned.
    Solution
    아래 "Workflow Directory Services User/Role Validation"을
    parameters : 100000, Yes, Yes, No로 수행을 하시기 바랍니다.
    Reference
    Note 454988.1

    please check note( Supplier Registration Page Gets Error java.sql.SQLException: ORA-20001 )
    Note:330350.1 althogh its for 11i but the cuz seems right
    Cause
    The root cause is that FND.H changes fnd_user_resp_groups from a table to a view which return
    end_date as year 9999 instead of the value of null in the underlying data. The code in
    confirm_has_resp expects the end_date of the pos guest user resp to user guest to be null, and if
    not, trying to insert the assignment and fail (because the assignment already exists and active).
    Development provide the cause in bug 3610633
    fadi

Maybe you are looking for