ORA-2074

Hi,
I have a project on VB.Net that use OleDb to communicate with Oracle. At use package dbms_transaction and it's procedure rollback, savepoint I have a error ORA-2074 cannot ROLLBACK (SAVEPOINT) in distribution transaction, but if I replace this procedure call with SQL equivalent (rollback or savepoint) then all OK.
Why it's happens? In documentation says that dbms_transaction.rollback and dbms_transaction.savepoint(...) is only equivalent with SQL functions.

Basically you cannot set nls parameters over a dblink. For that matter you cannot issue ddl statements over dblinks on a remote database.
For your specific scenario take a look at Doc ID: 132679.1 in the Metalink.
Hope this helps.

Similar Messages

원격지 서버의 Package를 DB Link로 구동시 ORA-02074 발생

각설하고 문의드립니다.
1. 구성
- 부산 서버의 A 유저에 있는 Package를
동일 서버의 B 유저에 GRANT하였습니다.
- 서울 서버의 C 유저에서 B 유저로 DB Link를 구성하였습니다.
- 서울 서버의 C 유저에서 부산 서버의 A 유저의 Package를 실행하였습니다.
(EXECUTE A_USER.A_PACKAGE.A_PROCEDURE@SB_LINK;)
- A_PACKAGE.A_PROCEDURE는 A 유저의 테이블뿐만아니라,
C 유저의 TABLE도 SELECT/UPDATE합니다.
물론 부산 서버에서 C 유저로 DB Link를 구성하였습니다.
2. 결과
- "ORA-02074 cannot COMMIT or ROLLBACK in a distributed transaction"
이 발생합니다.
지원업체의 DB 관리자에게 문의하였더니, Oracle8i는 DB Link를 통하여
Package를 구동할 수 없을지도 모른다고 합니다.
하지만, 저는 무언가 설정이 잘못되었다고 생각합니다.
무엇이 문제인지 가르쳐 주시면 감사하겠습니다.

시스템 정보가 필요합니다.
OS version, OS word size(32bit, 64bit), DB version, DB word size(32bit, 64bit)
필요합니다. odbc사용여부도요
그리고 사항에 따라 다른데 찾아보니 8i의 버그인데
9i가 되어서야 고쳐진 것도 있네요.
metalink itar를 열어서 공식적으로 진행해보시죠.
왜냐하면 업그레이드를 해야 한다고 나와있긴 하지만 해당 사항에
대한 코드패치가 있다면 적용시키고 해결할 수도 있을테니까요.
9i로 업그레이드를 한다면 oracle 7버젼과는 db link가 안됩니다.
다른 서비스와의 연계성때문에 9i로 못올릴 수도 있으니
오라클에 공식 요청해서 정확하게 알아내는 것이 중요할 것 같습니다.
여러 문서중 하나..;;
note 215554.1 Calling a Remote Stored Procedure Fails with ORA-2074 error

ORA-02074 in oracle 8 Worked fine in 7.x

Executing a plsql string from msaccess
via an odbc passthrough query..
for some reason the oracle8 odbc driver is
enforcing a transaction
is there a known work around?????
ORA-02074 cannot string in a distributed transaction
Cause: A commit or rollback was attempted from session other than the parent
of a distributed transaction.
Action: Only commit or roll back from the parent session.

HELP!!... Okay here goes..
I am using an passthrough query to Oracle
It worked in Oracle 7.4,
but is not working in 8i
**This is the error
[Oracle][ODBC][Ora]
ORA-02074: cannot SET SAVEPOINT in a distributed transaction
ORA-06512: at "FuncName", line 1391
ORA-06512: at "FuncName", line 1995
ORA-06512: at "FuncName", line 2016
ORA-06512: at line 1
(#2074)
**This is the PL/SQL
begin call_isrconpick('36719288', 0, 0, 1, 'DPR'); end;
**This is the VB code..
Function CommitOnePick(strtask_id As String, _
intpicked_q As Integer, _
intoverflow As Integer, _
intshort As Integer, _
strperf_by As String)
'On Error GoTo eTrap
Dim strConn As String
Dim qdf As QueryDef
'If MsgBox("Are you sure you want execute the PLSQL statement?", _
vbOKCancel + vbQuestion + vbDefaultButton2) = vbOK Then
DoCmd.Hourglass True
strConn = CurrentDb.TableDefs("MOVE_TABLE_DATA").Connect
Set qdf = CurrentDb.CreateQueryDef("")
qdf.Connect = strConn
qdf.SQL = "begin call_isrconpick('" & _
strtask_id & "', " & _
intpicked_q & ", " & _
intoverflow & ", " & _
intshort & ", '" & _
strperf_by & "'); end;"
Debug.Print qdf.SQL 'sanity check
qdf.ReturnsRecords = False
DoCmd.Hourglass False
qdf.Execute dbSQLPassThrough
DoCmd.Hourglass False
'End If
Exit Function
eTrap:
DoCmd.Hourglass False
MsgBox "An unexpected error occured:" & vbCrLf & vbCrLf & Err & " - " & Error, vbExclamation, "Error"
End Function
null

PL/SQL report errors: ORA-01422

Hi all,
(before i you read i would like to say i have searched the net for this error code but nothing shows up like this problem..)
I am getting an error problem when i select certain Schemas from a list on an apex app. page, it only works for some schemas not all..
When i select one schema, it is supposed to display one row.. when i select [ALL] it is supposed to show them all.
It does work if i select '[ALL]' from the select list (p3_schema_name), just not for every single individual one.
the error code:
ORA-01422: exact fetch returns more than requested number of rows
declare
vSchema varchar2(20);
vStmt varchar2(1000);
vVersion number(5);
vDBName varchar2(20);
vHostName varchar2(80);
vStmt2 varchar2(1000);
vVersion2 number(5);
vDBName2 varchar2(20);
vServer2 varchar2(80);
vSchema2 varchar2(80);
CURSOR c_schemas IS
    select owner from dba_tables@P3_DB_NAME.db_link where table_name = 'DDL_LOG' and num_rows > 0 order by owner;
begin
IF :P3_SCHEMA_NAME != '[ALL]' AND :P3_DB_NAME IS NOT NULL AND :P3_SERVER_NAME IS NOT NULL THEN
    vServer2 := :P3_SERVER_NAME;
    vSchema2 := :P3_SCHEMA_NAME;
      vStmt2 := 'select distinct DDH_DB_NM, max(DDH_SCHEMA_NR)keep(dense_rank last order by ddh_runstart_td) AS "PATCH" from &P3_SCHEMA_NAME..ddl_log@&P3_DB_NAME.db_link GROUP BY DDH_DB_NM';
      Execute Immediate vStmt2 into vDBName2, vVersion2;
        htp.p('<br>');
        htp.p('<table border="1">');
        htp.p('<tr>');
        htp.p('<th bgcolor="#FFCC99">SERVER NAME</th>');
        htp.p('<th bgcolor="#FFCC99">DB NAME</th>');
        htp.p('<th bgcolor="#FFCC99">SCHEMA NAME</th>');
        htp.p('<th bgcolor="#FFCC99">PATCH</th>');
        htp.p('</tr>');
        htp.p('<tr>');
        htp.p('<td>');
        htp.p(vServer2);
        htp.p('</td>');
        htp.p('<td>');
        htp.p(vDBName2);
        htp.p('</td>');
        htp.p('<td>');
        htp.p(vSchema2);
        htp.p('</td>');
        htp.p('<td>');
        htp.p(vVersion2);
        htp.p('</td>');
        htp.p('<td>');
        htp.p('<BR>');
        htp.p('</td>');
        htp.p('</tr>');
        htp.p('</tr>');
        htp.p('</table>');
   ELSE IF :P3_SCHEMA_NAME = '[ALL]' AND :P3_DB_NAME IS NOT NULL AND :P3_SERVER_NAME IS NOT NULL THEN
   vHostName := :P3_SERVER_NAME;
   vDBName := :P3_DB_NAME;
     open c_schemas;
      htp.p('<br>');
      htp.p('<table border="1">');
      htp.p('<tr>');
      htp.p('<th bgcolor="#FFCC99">SERVER NAME</th>');
      htp.p('<th bgcolor="#FFCC99">DB NAME</th>');
      htp.p('<th bgcolor="#FFCC99">SCHEMA NAME</th>');
      htp.p('<th bgcolor="#FFCC99">PATCH</th>');
      htp.p('</tr>');
    LOOP
      FETCH c_schemas INTO vSchema;
      EXIT WHEN c_schemas%NOTFOUND;
      vStmt := 'select max(DDH_SCHEMA_NR)keep(dense_rank last order by ddh_runstart_td) AS "PATCH" from '||vSchema||'.ddl_log@&P3_DB_NAME.db_link where DDH_SCHEMA_NR = (select max(DDH_SCHEMA_NR) from '||vSchema||'.ddl_log@&P3_DB_NAME.db_link) and rownum < 2' ;
      Execute Immediate vStmt into vVersion ;
      htp.p('<tr>');
      htp.p('<td>');
      htp.p(vHostName);
      htp.p('</td>');
      htp.p('<td>');
      htp.p(vDBName);
      htp.p('</td>');
      htp.p('<td>');
      htp.p(vSchema);
      htp.p('</td>');
      htp.p('<td>');
      htp.p(vVersion);
      htp.p('</td>');
      htp.p('<td>');
      htp.p('<BR>');
      htp.p('</td>');
      htp.p('</tr>');
    END LOOP;
      htp.p('</tr>');
      htp.p('</table>');
CLOSE c_schemas;
END IF;
END IF;
END;I have checked the DDH_SCHEMA_NR for repeating entries of the highest number.. some of the ones that dont work do have repeating entries some don't.
Sorry if this is confusing, i have tried to explain it as best as i can.
Thanks in advance for any help.
Ashleigh

Hello Ashleigh,
Based on your code, I'd start by running this piece of SQL via command-line (thru SQL Workshop, SQL*Plus, Toad, etc.), replacing &P3_SCHEMA_NAME. and &P3_DB_NAME. with values that are currently causing the routine to fail and see if it returns more than one row. I don't know your data, but DISTINCT and GROUP BY are typically used to return multiple (though grouped/summarized) rows. It appears to be the only statement that would cause the error your seeing (more than one row being returned into single variables).
select distinct DDH_DB_NM, max(DDH_SCHEMA_NR)keep(dense_rank last order by ddh_runstart_td) AS "PATCH" from &P3_SCHEMA_NAME..ddl_log@&P3_DB_NAME.db_link GROUP BY DDH_DB_NM;I'm actually surprised that the code runs at all. I didn't think 'execute immediate' would know what to do with substitutions indicated as "&something." (I've typically seen that when substituting in dynamic HTML/Javascript code but maybe I'm learning something new). But since you already have vServer2 and vSchema2, I'd be more apt to code it as:
vStmt2 := 'select distinct DDH_DB_NM, max(DDH_SCHEMA_NR)keep(dense_rank last order by ddh_runstart_td) AS "PATCH" from ' ||
vSchema2 || '.ddl_log@' || vServer2 || '.db_link GROUP BY DDH_DB_NM';Hope this helps,
John

Ora-00604 error and ora 01000 error while report generation.

hi all,
I am trying to generate the multiple reports of same template through a program.
While this job is running, i get the following error at the BIP console and the reports don't get generated.
[101711_044115578][][EXCEPTION] java.sql.SQLException: ORA-00604: error occurred
at recursive SQL level 1
ORA-01000: maximum open cursors exceeded
ORA-00604: error occurred at recursive SQL level 1
ORA-01000: maximum open cursors exceeded
ORA-01000: maximum open cursors exceeded
Kindly help.
Thanks.

Lots of resources with a simple search to see what this is about, for example:
http://www.orafaq.com/wiki/ORA-01000
ORA-01000:     maximum open cursors exceeded
Cause:     A host language program attempted to open too many cursors. The initialization parameter OPEN_CURSORS determines the maximum number of cursors per user.
Action:     Modify the program to use fewer cursors. If this error occurs often, shut down Oracle, increase the value of OPEN_CURSORS, and then restart Oracle.
open_cursors parameter
http://download.oracle.com/docs/cd/E11882_01/server.112/e25513/initparams160.htm#REFRN10137
Oracle support note:
OERR: ORA-1000 maximum open cursors exceeded (Doc ID 18591.1)

EA2: ORA-01427 clicking on a view in the navigator

SQLDev: 1.5.0.52.03
Java: 1.6.0_04
Oracle: 9.2.0.7.0
I'm getting the following error when I click on a view in the navigator pane:
An error was encountered performing the requested operation:
ORA-01427: single-row subquery returns more than one row 01427. 00000 - "single-row subquery returns more than one row"I'm not seeing any errors in the shell window.
After clicking on <OK> in the error dialog, the normal tabs (Columns, Data, Grants, Dependencies, Details, SQL) are displayed, but there is no content in the Columns tab.
All the other tabs seem to function normally.
Here is the DDL from the SQL tab
CREATE OR REPLACE VIEW "SUBSCRIPTIONS"
    "ORDER_ID", "SUNBURST_ORDER_ID", "SIEBEL_ORDER_ID", "ACCOUNT_ID",
    "COMP_ID", "SUBACCOUNT_ID", "START_DATE", "END_DATE", "PULL_DATE",
    "SUBSCRIPTION_TYPE", "PRICE_CLASS", "DESCRIPTION", "SEAT_COUNT",
    "ORDER_DURATION", "CALLBACK_INTERVAL", "UPDATE_DATE", "UPDATE_USERNAME",
    "AFFILIATE"
AS
    SELECT order_id,
        sunburst_order_id,
        siebel_order_id,
        account_id,
        comp_id,
        subaccount_id,
        start_date,
        end_date,
        pull_date,
        product_id,
        price_class,
        product_name,
        add_users,
        order_duration,
        callback_interval,
        last_mdfy_date,
        last_mdfy_emp,
        affiliate
    FROM csbcrossworlds.subscriptions;We have 15 views in this schema, 3 of them fail this way but the other 12 display the columns just fine. So far I am unable to detect any commonality.
Any ideas?

Ok, I think I found the problem. The view in question (SUBSCRIPTIONS) is owned by 'PHILC' and it references a table named 'SUBSCRIPTIONS' owned by 'CSBCROSSWORLDS'. There are two other development schemas that also own tables named 'SUBSCRIPTIONS'.
I believe the 'Columns' tab is executing the query below. The subquery in this SQL tries to identify the primary key columns for the 'SUBSCRIPTIONS' view in my schema (PHILC):
SELECT
    c.column_name,
    DECODE(
        data_type,
            'CHAR',      data_type||'('||c.data_length||')',
            'VARCHAR',   data_type||'('||c.data_length||')',
            'VARCHAR2', data_type||'('||c.data_length||')',
            'NCHAR'   , data_type||'('||c.data_length||')',
            'NUMBER' , DECODE(c.data_precision,null,'NUMBER', data_type||'('||c.data_precision||','||c.data_SCALE||')'),
            'NVARCHAR', data_type||'('||c.data_length||')',
            'NVARCHAR2', data_type||'('||c.data_length||')',
            data_type) data_type,
    DECODE(nullable, 'Y', 'Yes', 'No') nullable,
    c.DATA_DEFAULT,
    column_id,
    com.comments,
    (SELECT 1 FROM all_constraints, all_cons_columns
      WHERE all_constraints.constraint_type = 'P' AND
            all_constraints.constraint_name = all_cons_columns.constraint_name AND
            all_constraints.owner = all_cons_columns.owner AND
            all_cons_columns.table_name = c.table_name AND
            c.column_name = all_cons_columns.column_name) Primary_Key,
    c_update.insertable,
    c_update.updatable,
    c_update.deletable
FROM
    sys.all_tab_Columns c, sys.all_col_comments com, sys.user_updatable_columns c_update
WHERE
    c.owner = :OBJECT_OWNER AND
    c.table_name = :OBJECT_NAME AND
    c.table_name = com.table_name AND
    c.owner = com.owner AND
    c.column_name = com.column_name AND
    c_update.column_name = com.column_name AND
    c_update.table_name = com.table_name
;Extracting the subquery into this:
SELECT
    all_constraints.owner,
    all_constraints.table_name,
    all_constraints.constraint_name
FROM all_constraints, all_cons_columns
WHERE
    all_constraints.constraint_type = 'P' AND
    all_constraints.constraint_name = all_cons_columns.constraint_name AND
    all_constraints.owner = all_cons_columns.owner and
    all_cons_columns.table_name = 'SUBSCRIPTIONS' and
    'ORDER_ID' = all_cons_columns.column_name;I got this output:
   owner          table_name      constraint_name
CUTOVER          SUBSCRIPTIONS    SUBSCRIPTIONS_PK
CROSSWORLDS      SUBSCRIPTIONS    SUBSCRIPTIONS_PK
CSBCROSSWORLDS   SUBSCRIPTIONS    SUBSCRIPTIONS_PKLooking at the DDL for the view, the row we really want is for owner 'CSBCROSSWORLDS'. Unfortunately, that means having to somehow parse the SQL text to extract the owner name...
Phil

Using database-link in view to get around ORA-01031 error

I have been granted select rights on a users table. I am therefore able to select from his table. If however I try create a view against his table I run into the ORA-01031 problem. I have worked around this problem by creating a database-link to myself and then adding that to the view creation and it works. What are the downsides of using the database-link in this way?

The only down side I have been able to identify is that a extra session is created and that the CPU has a little extra work due to the LOOP BACK that takes place. I need to ensure the network is not unnessesarly used and therefore will need to ensure that 127.0.0.1 (local host) is used in the database connection discription. e.g.
create database link my_db_link connect to scott identified by tiger using '(description=(address=(protocol=tcp)(host=127.0.0.1) (Port = 1521) ) (connect_data= (sid=ora10g)))';

Getting ora:00904 invalid indentifier error while running i query

Hi,
I have a remote database and local database both are oracle 10gR2.Now i have written the below mentioned query in my local database and is working fine,but in case remote database it is throughing error ora:00904 invalid indentifier.
I had export the dump from remote db and import it on my local db and i tried the same and it is working fine on local after that also.
As i believe that this error usually come for column name not exist or column name or it's length or for any special character in column name of the table.But as i said it is working fine on local db but not in remote db though i am using the same dump for local and remote.
Though when i am querying the table i can able to fetch data for the any record but when i am using the below mentioned query for the same i am getting the error.As i am doing this to fecth the data for child parent related relationship.
Can any one suggest is there anything related to configaration or something else.
Please do let me know if you do want some more information on the query what i am doing inside of it.
Rgds,
Anit
Edited by: Anit A. on Sep 1, 2008 2:32 AM
Edited by: Anit A. on Sep 1, 2008 2:33 AM

WITH t
AS
SELECT decode(t.spnlevel
,3,t.u_quotesdtlid
,2,decode((select count(*)
from u_quotesdtl t2
where t2.u_quotesdtlid = t.u_quotesdtlid
and t2.parentspn = (t2.jobgroupid||':'||t2.jobtype)
),0,(select t1.u_quotesdtlid
from u_quotesdtl t1
where t1.spnitemcode = t.parentspn
and t1.spnlevel = '3'
and t1.jobtype = t.jobtype
and t1.jobgroupid = t.jobgroupid
and t1.QUOTEID = t.QUOTEID
),t.u_quotesdtlid
,1,decode((select count(*)
from u_quotesdtl t2
where t2.QUOTEID = t.QUOTEID
and t2.parentspn = (t2.jobgroupid||':'||t2.jobtype)
),0,t.u_quotesdtlid,decode((select count(*)
from u_quotesdtl t3
where t3.QUOTEID = t.QUOTEID
and t3.parentspn = (t3.jobgroupid||':'||t3.jobtype)
and t3.u_quotesdtlid in (select t1.u_quotesdtlid
from u_quotesdtl t1
where t1.spnitemcode = t.parentspn
and t1.spnlevel = '2'
and t1.jobtype = t.jobtype
and t1.jobgroupid = t.jobgroupid
and t1.QUOTEID = t.QUOTEID
),0,(select t4.u_quotesdtlid
from u_quotesdtl t4
,(select t1.parentspn
,t1.jobtype
,t1.jobgroupid
from u_quotesdtl t1
where t1.spnitemcode = t.parentspn
and t1.spnlevel = '2'
and t1.jobtype = t.jobtype
and t1.jobgroupid = t.jobgroupid
and t1.QUOTEID = t.QUOTEID
) t5
where t4.spnitemcode = t5.parentspn
and t4.spnlevel = '3'
and t4.jobtype = t5.jobtype
and t4.jobgroupid = t5.jobgroupid
and t4.QUOTEID = t.QUOTEID
(select t1.u_quotesdtlid
from u_quotesdtl t1
where t1.spnitemcode = t.parentspn
and t1.spnlevel = '2'
and t1.jobtype = t.jobtype
and t1.jobgroupid = t.jobgroupid
and t1.QUOTEID = t.QUOTEID
,null,t.u_quotesdtlid) as parentquoteid
,t.u_quotesdtlid as quotesdtlid
,t.spnlevel as spnlevel
FROM u_quotesdtl t
WHERE t.QUOTEID ='som key id'
ORDER BY parentquoteid,t.spnlevel desc
select * from t;

'ORA-01722: Invalid Number' error while Running a Query

Hi,
I'm trying to run a query built on a DSO. The DSO has a field 'Start Date'. This Start Date InfoObject has a reference Char as 0DATE.
This Start Field has blank values due to which I'm getting the ORA-01722 error. I came across many threads with same topic of discussion. As mentioned in one of the Threads I have written a program to update 'Start Date' with 00000000. The code wriiten is "UPDATE /BIC/AZ_MONINV00 SET /BIC/ZSTR_DTE = '00000000' where /BIC/ZSTR_DTE = ' '.
Now when I see the data in the active data table of DSO the blank value is replaced with '00000000'.
But If I right click on the DSO click on display data the 'Start Date' field is blank. And now the Query also gets executed without any error. But in the output of the query the 'Start Date' Field has "#" values.
Can anyone suggest on how can I make these "#" values appear as 00000000 in the report?

In this case, you have to write a macro to avoid # in Analyzer.
Right Click-->Display Data will show data from Active table of DSO only.
If you don't want to show any blank date values in the report, you can exclude in Filter in Query.

ORA-12712 error while changing nls character set to AL32UTF8

Hi,
It is strongly recommend to use database character set AL32UTF8 when ever a database is going to used with our XML capabilities. The database character set in the installed DB is WE8MSWIN1252. For making use of XML DB features, I need to change it to AL32UTF8. But, when I try doing this, I'm getting ORA-12712: new character set must be a superset of old character set. Is there a way to solve this issue?
Thanks in advance,
Divya.

Hi,
a change from we8mswin1252 to al32utf8 is not directly possible. This is because al32utf is not a binary superset of we8mswin1252.
There are 2 options:
- use full export and import
- Use of the Alter in a sort of restricted way
The method you can choose depends on the characters in the database, is it only ASCII then the second one can work, in other cases the first one is needed.
It is all described in the Support Note 260192.1, "Changing the NLS_CHARACTERSET to AL32UTF8 / UTF8 (Unicode)". Get it from the support/metalink site.
You can also read the chapters about this issue in the Globalization Guide: [url http://download.oracle.com/docs/cd/E11882_01/server.112/e10729/ch11charsetmig.htm#g1011430]Change characterset.
Herald ten Dam
http://htendam.wordpress.com

While updating a table i am getting ORA-00600 error.

Hi all,
While updating a table i am getting the following:
**SQL Error: ORA-00600: internal error code, arguments: [qkebCreateConstantOpn1], [], [], [], [], [], [], [], [], [], [], []**
**00600. 00000 - "internal error code, arguments: [%s], [%s], [%s], [%s], [%s], [%s], [%s], [%s]"**
I am not getting how to proceed on this. Please guide me.
Thanks,
Ritesh

While performing some unspecified action (no DML) on an unknown table (no DDL) in an unknown version and edition of the Oracle database you had an untrapped Oracle exceptions.
There are too many unknowns to help you beyond recommending you open an SR at MyOracleSupport.

Error while adding Image: ORA-00001: unique constraint

Dear all,
I have an error while adding images to MDM I can´t explain. I want to add 7231 images. About 6983 run fine. The rest throws this error.
Error: Service 'SRM_MDM_CATALOG', Schema 'SRMMDMCATALOG2_m000', ERROR CODE=1 ||| ORA-00001: unique constraint (SRMMDMCATALOG2_M000.IDATA_6_DATAID) violated
Last CMD: INSERT INTO A2i_Data_6 (PermanentId, DataId, DataGroupId, Description_L3, CodeName, Name_L3) VALUES (:1, :2, :3, :4, :5, :6)
Name=PermanentId; Type=9; Value=1641157; ArraySize=0; NullInd=0;
Name=DataId; Type=5; Value=426458; ArraySize=0; NullInd=0;
Name=DataGroupId; Type=4; Value=9; ArraySize=0; NullInd=0;
Name=Description_L3; Type=2; Value=; ArraySize=0; NullInd=0;
Name=CodeName; Type=2; Value=207603_Img8078_gif; ArraySize=0; NullInd=0;
Name=Name_L3; Type=2; Value=207603_Img8078.gif; ArraySize=0; NullInd=0;
Error: Service 'SRM_MDM_CATALOG', Schema 'SRMMDMCATALOG2_m000', ERROR CODE=1 ||| ORA-00001: unique constraint (SRMMDMCATALOG2_M000.IDATA_6_DATAID) violated
Last CMD: INSERT INTO A2i_Data_6 (PermanentId, DataId, DataGroupId, Description_L3, CodeName, Name_L3) VALUES (:1, :2, :3, :4, :5, :6)
Name=PermanentId; Type=9; Value=1641157; ArraySize=0; NullInd=0;
Name=DataId; Type=5; Value=426458; ArraySize=0; NullInd=0;
Name=DataGroupId; Type=4; Value=9; ArraySize=0; NullInd=0;
Name=Description_L3; Type=2; Value=; ArraySize=0; NullInd=0;
Name=CodeName; Type=2; Value=207603_Img8085_gif; ArraySize=0; NullInd=0;
Name=Name_L3; Type=2; Value=207603_Img8085.gif; ArraySize=0; NullInd=0;
I checked all data. There is no such dataset in the database. Can anybody give me a hint how to avoid this error.
One thing I wonder: The PermanentId is allways the same but I can´t do anything here.
BR
Roman
Edited by: Roman Becker on Jan 13, 2009 12:59 AM

Hi Ritam,
For such issues, can you please create a new thread or directly email the author rather than dragging back up a very old thread, it is unlikely that the resolution would be the same as the database/application/etc releases would most probably be very different.
For now I will close this thread as unanswered.
SAP SRM Moderators.

ORA-600 [17069] error while running catrelod.sql to downgrade 11g database

Hi,
We are downgrading our 11.2.0.2 database to 10.2.0.4. We have successfullly run catdwgrd.sql without any errors in 11g env. While running catrelod.sql in 10g env we are facing the following error:
SQL> @?/rdbms/admin/catrelod.sql
TIMESTAMP
COMP_TIMESTAMP RELOD__BGN 2013-04-24 20:15:39 2456407 72939
DOC>#######################################################################
DOC>#######################################################################
DOC> The following statement will cause an "ORA-01722: invalid number"
DOC> error if the database server version is not 10.0.0.
DOC> Shutdown ABORT and use a different script or a different server.
DOC>#######################################################################
DOC>#######################################################################
DOC>#
no rows selected
DOC>#######################################################################
DOC>#######################################################################
DOC> The following statement will cause an "ORA-01722: invalid number"
DOC> error if the database has not been opened for MIGRATE.
DOC>
DOC> Perform a "SHUTDOWN ABORT" and
DOC> restart using MIGRATE.
DOC>#######################################################################
DOC>#######################################################################
DOC>#
no rows selected
Session altered.
Session altered.
no rows selected
DECLARE
ERROR at line 1:
ORA-00600: internal error code, arguments: [17069], [0x170FB8CA8], [], [], [],
[], [], []I have checked the trace file in udump but it dint give any readable information.
Please find below environment details.
OS : RHEL 5 64 bit
11g Database : 11.2.0.2
10g Database : 10.2.0.4
Kindly assist.

KR10822864 wrote:
Whenever an ORA-600 error is raised a trace file is generated and an entry written to the alert.log with details of the trace file location. Starting with Oracle Database 11g Release 1, the diagnosability infrastructure was introduced which places the trace and core files into a location controlled by the DIAGNOSTIC_DEST initialization parameter when an incident, such as an ORA-600 is created. For earlier versions, the trace file will be written to either USER_DUMP_DEST (if the error was caught in a user process) or BACKGROUND_DUMP_DEST (if the error was caught in a background process like PMON or SMON). The trace file contains vital information about what led to the error condition
please post 40 lines of alert log info .
MOS Note:ORA-600 [17069] "Failed to pin a library cache object after 50 attempts" [ID 39616.1]
"Look in the trace file for the text 'LIBRARY OBJECT HANDLE: handle=170fb8ca8'"
if not found any massages like above please raise [email protected].
Hi KR,
Thanks for your help. As suggested I have checked the trace file to search and found the below info. I suppose it is some kind of lock but not sure about it. Please let me know if the following makes sense:
    SO: 0x21158a6e0, type: 3, owner: 0x211006f28, flag: INIT/-/-/0x00
    (call) sess: cur 211572570, rec 211572570, usr 211572570; depth: 0
      SO: 0x21158a9b8, type: 3, owner: 0x21158a6e0, flag: INIT/-/-/0x00
      (call) sess: cur 211572570, rec 0, usr 211572570; depth: 1
        SO: 0x1727a2618, type: 54, owner: 0x21158a9b8, flag: INIT/-/-/0x00
        LIBRARY OBJECT PIN: pin=1727a2618 handle=170fb8ca8 mode=S lock=171243e98
        user=211572570 session=211572570 count=1 mask=001d savepoint=0x43 flags=[00]
        SO: 0x171243e98, type: 53, owner: 0x21158a9b8, flag: INIT/-/-/0x00
        LIBRARY OBJECT LOCK: lock=171243e98 handle=170fb8ca8 mode=S
        call pin=0x1727a2618 session pin=(nil) hpc=0000 hlc=0000
        htl=0x171243f18[0x17278a310,0x17278a310] htb=0x17278a310 ssga=0x172789928
        user=211572570 session=211572570 count=1 flags=PNC/[0400] savepoint=0x43
        LIBRARY OBJECT HANDLE: handle=170fb8ca8 mtx=0x170fb8dd8(0) cdp=0
        name=SYS.STANDARD
        hash=51570e225ed8a9a803b7318f191e0a8d timestamp=04-18-2006 00:00:00
        namespace=TABL flags=KGHP/TIM/SML/[02000000]
        kkkk-dddd-llll=0000-001d-001d lock=S pin=S latch#=3 hpc=0004 hlc=0004
        lwt=0x170fb8d50[0x170fb8d50,0x170fb8d50] ltm=0x170fb8d60[0x170fb8d60,0x170fb8d60]
        pwt=0x170fb8d18[0x170fb8d18,0x170fb8d18] ptm=0x170fb8d28[0x170fb8d28,0x170fb8d28]
        ref=0x170fb8d80[0x170fb8d80,0x170fb8d80] lnd=0x170fb8d98[0x170f05b50,0x170fa6858]
          LIBRARY OBJECT: object=170e82de8
          type=PCKG flags=EXS/LOC[0005] pflags=NST/IVR[0201] status=VALD load=0
          DATA BLOCKS:
          data#     heap pointer    status pins change whr
              0 170e831f8 170e82fc0 I/P/A/-/-    0 NONE   00
      SO: 0x21158e470, type: 5, owner: 0x21158a6e0, flag: INIT/-/-/0x00
      (enqueue) CU-70E88BC0-00000001    DID: 0001-001F-00000004
      lv: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 res_flag: 0x2
      res: 0x17677adc8, mode: X, lock_flag: 0x0
      own: 0x211572570, sess: 0x211572570, proc: 0x211006f28, prv: 0x17677add8
      SO: 0x177f82c28, type: 59, owner: 0x21158a6e0, flag: INIT/-/-/0x00
      cursor enqueue
      child: 170e89348, flag: 53, number: 0
      parent: 170e89738

Ora-00604,ora-01422 error while dropping the table

Hi gurus,
I am using Oracle 10g R2 on windows 2000 platform,while dropping the table the following error occured.
ORA-00604 : error occurred at recursive sql level 1.
ORA-01422: exact fetch returns more than requested number of rows.
Need urgent help.
Thanks in advance

Is there an AFTER EVENT trigger defined on this database? Can you check that?
Secondly, was this database migrated from earlier version? I remember having seen this problem on 9i (it was 9.2.0.1 or 9.2.0.2; I can't recall exactly).

Ora-00600 error when dropping a table

Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
When I tried to drop a table, I got 600 error:
SQL> desc DEV.ATTR_IDX$EX
Name Null? Type
NODE_ID NOT NULL NUMBER
COL1 NUMBER
SQL> show user;
USER is "DEV"
SQL> select count(*) from DEV.ATTR_IDX$EX;
COUNT(*)
0
SQL> drop table DEV.ATTR_IDX$EX;
drop table DEV.ATTR_IDX$EX
ERROR at line 1:
ORA-00600: internal error code, arguments: [15265], [], [], [], [], [], [], [],
SQL> drop table DEV.ATTR_IDX$EX purge;
drop table DEV.ATTR_IDX$EX purge
ERROR at line 1:
ORA-00600: internal error code, arguments: [15265], [], [], [], [], [], [], [],
I guess this is because it had a parent table, which I dropped (I used "drop table <parent_table>", and it did not give me error, very strange).
SQL> select dbms_metadata.get_ddl('TABLE','ATTR_IDX$EX') from dual;
DBMS_METADATA.GET_DDL('TABLE','ATTR_IDX$EX')
CREATE TABLE "DEV"."ATTR_IDX$EX"
( "NODE_ID" NUMBER NOT NULL ENABLE,
"COL1" NUMBER,
FOREIGN KEY ("NODE_ID")
REFERENCES () ON DELETE CASCADE ENABLE
) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS"
MONITORING
Try to drop FK constraints yields the same error.
So now how can I drop this table table, any work around?
Thanks.

This is a bug. There is no Patch avaialble for this yet. This error is seen where recyclebin is enabled. Possible workaround is to disable the recyclebin.
This happens with the dictionary corruption due to inconsistency between obj$ and seg$.
This is a correct answer but still i would suggest to contact Oracle support.

ORA-2074

Similar Messages

Maybe you are looking for