Ora-25215 from windows to unix - please help

I have successfully set up streams replication from unix to windows -- it works beautifully!
However, when I set up streams with a different set of tables going from windows to unix, I get the propagation error, "ora-25215: user_data type and queue type do not match"
I have been all over metalink and the internet trying to find a solution or explanation, and there is very little out there. I found a dozen hits on my metalink search on ora-25215 and one of them was "How to resolve ora-25215..." Alas, it really doesn't address a fix for simple streams, it goes into setting up a payload, etc...
Like I said, my unix to windows works like a charm, but unix to windows doesn't. By the way, my windows is 2k and my unix is solaris 8. Anyone have any ideas for what the problem is?
Thanks,
jimmy

Jimmy,
Make sure your propagation is configured correctly. It is also possible to get this error in Oracle9iR2 if you use the wrong queue name or schema when configuring propagation.
Janet

Similar Messages

I am facing issue in Receiving incoming calls, Name not getting displayed though the same has been saved in my phone book!! I have done sync from Windows contacts.. please help if some1 knows how to rectify the issue...

I am facing issue in Receiving incoming calls, Name not getting displayed though the same has been saved in my phone book!! I have done sync from Windows contacts.. please help if some1 knows how to rectify the issue...

Has your carrier been having issues with Call Display? Do the telephone numbers come up when people call, or does it just show 'Unknown Number' or 'Blocked' ?

TS3297 I keep getting the error 306 cannot connect to the iTunes Network when downloading songs on iTunes. I've tried all the troubleshooting steps from the forums and my technical issues are still unresolved. I have Windows 7. Please help!!

I keep getting the error 306 cannot connect to the iTunes Network when downloading songs on iTunes. I've tried all the troubleshooting steps from the forums and my technical issues are still unresolved. I have Windows 7. Please help!!

iTunes Store loads partially or returns "Error 306" or "Error 10054"
Proxies, parental control settings and software, security or filtering software, or a bad iTunes Store cache can cause this.
To address proxies, Remove Internet Options proxy settings ( http://support.apple.com/kb/TS1490 ) and connect to the Internet without a proxy.
To reset iTunes Store cache:
In iTunes, choose iTunes > Preferences (Mac) or Edit > Preferences (PC).
Click the Advanced tab.
Click the "Reset cache" button.
Click OK and see if the issue is resolved.
Adjust Parental Controls in iTunes:
Open iTunes.
Access iTunes preferences:
On a Mac: From the iTunes menu, choose Preferences.
On a Windows PC: From the Edit menu, choose Preferences.
Click the Parental Controls tab.
Remove restrictions on Parental Controls.
For more information on parental controls or content filtering software, see iTunes 10.5 for Windows: May see performance issues and blank iTunes Store.
http://support.apple.com/kb/TS4123?viewlocale=en_US

HT3775 why can't i play .wmv file in quicktime even after i download codec from windows? can anyone help me wit this please!!!!!

why can't i play .wmv file in quicktime even after i download codec from windows? can anyone help me wit this please!!!!!

Have you done the obvious things to try to fix it: quit Quicktime then start it back up again, log out then back in, reboot.
Edit: Just read one of your later posts. If VLC won't play it, this is unrelated to Quicktime and Flip4Mac. Are you sure these wmv files are okay?

HI! I am using iTunes with Windows 7 64bit.after upgrading itunes to 10.5.2.11 it opens only once. If i close it, then it will not open again.the only way to open itunes is by disabling the APSDaemon.exe from the task manager.please help!

HI! I am using iTunes with Windows 7 64bit.after upgrading itunes to 10.5.2.11 it opens only once. If i close it, then it will not open again.the only way to open itunes is by disabling the APSDaemon.exe from the task manager.please help!

Refer this article to reset Winsock to it's default. Your PCTools may have inserted LSP.
http://support.apple.com/kb/TS4123?viewlocale=en_US
After reset and restarting windows, you may get a prompt to remap LSP, click no.

When iPhone is connected to PC, it shows in itunes but Autoplay does not open for me to copy photos. I tried the Control Panel, changing Autoplay settings but no use. I use a Windows Vista. Please help! All my little ones' pictures are on my iPhone 3GS

When iPhone is connected to PC, it shows in itunes but Autoplay does not open for me to copy photos. I tried the Control Panel, changing Autoplay settings but no use. I use a Windows Vista. Please help! All my little ones' pictures are on my iPhone 3GS.
I tried hard reset on my iPhone. I tried restarting laptop and iPhone. I tried a different laptop. I tried removing driver and reinstalling from Device Manager but did not find a driver other than "Apple Mobile Device USB Driver" under "Universal Serial Bus controllers" which I heard shouldn't be uninstalled.
Anything I haven't tried?
HELP!

A bit confused by your statement
bcboarder wrote:
. I do not understand why the music is clearly on the Ipod but wont reconize it anywhere.
Are you seeing your music listed in the iPod screen, or in Win explorer as in your earlier post?
I can see all the songs in my Edrive>al's Ipod> Ipod Control> Music folder.
A corrupted iPod database, will report zero music used, and have your music size reported as others, so you wont see the music in the iPod screen. Sorry, I thought there was some hope for you with iPodAccess, in recovery of the corrupted iPod database with your ratings.
You can try to borrow and use the Mac Disk Utility ->First Aid ->Repair.
Of course, if your iPod Hardisk is in a bad state, from the Disk Diagnostic report, then all my suggestion are futile.

Cant download itunes, because ' there is an error with windows installer package' please help?

cant download itunes, because ' there is an error with windows installer package' please help?

I am getting the same message when I try to install the latest version of iTunes, I am running on Windows Vista Home Premium. I have tried so many different things to try to correct this and have now completly unistalled it from my laptop..... Now I have no iTunes what-so-ever on it and still can't install it. I found an older versin of iTunes and it installed without any problems, but I can't access it because my library was created on a newer version! Talk about frustrated..... WE NEED HELP!!!!!

After iPhoto quit unexpectedly, the last 5 months of photos disappeared from my library. Please help!

After iPhoto quit unexpectedly, the last 5 months of photos disappeared from my library. Please help! I can't find them anywhere.

You're using iPhoto 6?
Try these in order - from best option on down...
1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library allowing it to overwrite the damaged file.
2. Download <a href="http://www.fatcatsoftware.com/iplm/"><b><u>iPhoto Library Manager</b></u></a> and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
3. If neither of these work then you'll need to create and populate a new library.
To create and populate a new *iPhoto 6* library:
Note this will give you a working library with the same Rolls and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library on your desktop and find the Originals folder. From the Originals folder drag the individual Roll Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.

HT202152 I have tried updating my apps and software but it says my startup disk or hard disk is full. I deleted a lot of files and apps but they won't be erased from the trash. Please help

I have tried updating my apps and software but it says my startup disk or hard disk is full. I deleted a lot of files and apps but they won't be erased from the trash. Please help.

For information about the Other category in the Storage display, see this support article. If the display seems to be inaccurate, try rebuilding the Spotlight index.
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
In Photos:
File ▹ Show Recently Deleted ▹ Delete All
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then restart the computer. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation—not the mythical 10%, 15%, or any other percentage. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
Deleting files inside a photo or iTunes library will corrupt the library. Changes to such a library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
Install the app in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C.
For ODS:
security execute-with-privileges /A*/OmniDiskSweeper.app/*/M*/* 2>&-
For GP:
security execute-with-privileges /A*/GrandPerspective.app/*/M*/* 2>&-
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Paste into the Terminal window by pressing command-V. You'll be prompted for your login password.
The application window will open behind other open windows. When you scan a volume, the window will eventually show all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with the app, quit it and also quit Terminal.

Migrating database from windows to unix

Can anyone, please suggest me some reading on migrating a database from windows to unix? Thanks

Yes an export import is the most likely migration path you have. There is another option. You may install, just temporarily a 10g environment on the windows platform, then upgrade using the DBUA from 8i to 10g on the same platform. This way you will make sure you don't miss a piece of data during the migration process.
Once your database is at the 10g platform, you may proceed with a transport tablespace from 10g win to 10g unix. Violà, your database will be on the 10g platform.
Next, deinstall the windows temporary 10g installation.
Notes:
1. Make sure your 8i db is at the latest patchset available at 8i (8.1.7.4.0)
2. Define which unix platform you are referring to. It's because of endian issues.
~ Madrid.

ABAP Adaption while migrating from Windows to Unix

Dear All,
I am working on a project where SAP system has been migrating from Windows to Unix os. Because of this all ABAP which are using Files, Operating system command has to be adapted as well.
How can I get such a list of ABAP objects which will be affected by this migration.
Example I can look for Dataset command, External OS Commands and so on..
Please advice if there is a straight forward way to get such a list?
Your prompt response would be higly appreciated.
Thanks in Advance
Hemendra

Hello -
You need to visit URL - System Copy and Migration
Also refer to SAP note 547314, and the System Copy Guide for your SAP
release on SAP Service Marketplace :
http://service.sap.com/instguides -> <SAP System> -> <Release>
->Installation.
Regards.

HT1451 Music has completely disappeared from ITunes library! Please Help!!

Music has completely disappeared from ITunes library! Please Help!!
Hours and Hours of renaming, adding cover photos and so on have been for nothing. Itunes cannot find the files since they're not in the library at all!
I still have the music on my computer but don't want to add it as it is, as I have spent a lot of time "fixing" it! PLEASE HELP!

Did you use spotlight to search? (I'm assuming you have a Mac as given above despite this thread being in the Windows forum). How long have you used iTunes on this computer? Is there a backup to your library, perhaps an only copy of it on a machine you've "retired". Is the media present in the media folder? (Yes, you've answered that earlier.) If so then the media files should have absorbed all the tag changes that you made and reimporting the media into a new library might not be a complete disaster, though playlists, playcounts, ratings etc. would be irretrievably lost.
tt2

Hello there. i lost my Ipad and i need to log out all email and facebook. Also is there any chance get my diary somehow. how can i log out from my Ipad? please help, i have very important information and other stuff in my Ipad?

I need help to log out from my stolen Ipad. please help.

If you had installed iOS 7 it would be Activation locked, but I see you only have iOS 5. You do have a backup of you iPad files on your computer or iCloud, don't you?
If the iPad was running iOS 7, the thief/finder will not ever be able to use it.
iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
Apple (and no one else) can not assist (with serial number or iCloud) in finding a lost or stolen iPad.
Report to police along with serial number. Change all your passwords.
These links may be helpful.
How to Track and Report Stolen iPad
http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
Reporting a lost or stolen Apple product
http://support.apple.com/kb/ht2526
What to do if your iOS device is lost or stolen
http://support.apple.com/kb/HT5668
How to Find a Missing iPad with FindMyiPad
http://www.dummies.com/how-to/content/how-to-find-a-missing-ipad-with-findmyipad .html
iCloud: Locate your device on a map
http://support.apple.com/kb/PH2698
iCloud: Lost Mode - Lock and Trace
http://support.apple.com/kb/PH2700
iCloud: Remotely Erase your device
http://support.apple.com/kb/PH2701
Report Stolen iPad Tips and iPad Theft Prevention
http://www.stolen-property.com/report-stolen-ipad.php
General steps to follow for a Stolen iPad
http://stolen-ipad.com/
How to recover a lost or stolen iPad
http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
How to Find a Stolen iPad
http://www.ehow.com/how_7586429_stolen-ipad.html
What NOT to do if your iPhone or iPad is lost or stolen
http://www.tomahaiku.com/what-not-to-do-if-your-iphone-or-ipad-lost-or-stolen/
Apple Product Lost or Stolen
http://sites.google.com/site/appleclubfhs/support/advice-and-articles/lost-or-st Len
Oops! iForgot My New iPad On the Plane; Now What?
http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
If you don't know your lost/stolen iPad's serial number, use the instructions below. The S/N is also on the iPad's box.
How to Find Your iPad Serial Number
http://www.ipadastic.com/tutorials/how-to-find-your-ipad-serial-number
iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number
http://support.apple.com/kb/HT4061
Check the serial number (located on back/bottom) in this lost/stolen iPad database. However, most owners are not aware of this database and don’t enter the serial number.
Stolen iPad Database
http://www.stolenlostfound.org/online-stolen-ipad-database
Also do a search, using the serial number, on your local Craig’s List. Some users list the serial number of a stolen iPad to thwart the sale of a stolen device.
 Cheers, Tom

HT1335 My ipod classic have no software and I am stuck with it. It was formatted for apple but I use windows 8. Please help. Thanks in advance.

My ipod classic have no software and I am stuck with it. It was formatted for apple but I use windows 8. Please help. Thanks in advance.

Hello there, DrDhillon.
The following Knowledge Base article goes over the steps that will help you resolve your issue:
Restoring iPod to factory settings
http://support.apple.com/kb/HT1339
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

It says "error 7, windows error 127" Please help

It says "error 7, windows error 127" Please help

I tried that, got this error:
An error occured during the installation of assembly "Microsoft.VC80.CRT.type="win32".version="8.0.50.727.6195".publicKeyToken="1fc8 b3b9a1e18e3b".processorArchitecture="x86". Please refer to help and Support for more information. HRESULT: 0x8007422.
Please help!

Ora-25215 from windows to unix - please help

Similar Messages

Maybe you are looking for