ORA-25292: which setting up CDC

I'm trying to setup CDC between 9.2 source and 10.2 stage. After a little bit of struggle the setup went fine. But I'm getting "ORA-25292: Buffer operations are not supported on the queue" in the alert log on source db.
Has anyone tried CDC between 9.2 and 10.2 ? or faced the above error in any other place?
Regards,
Ali

I am setting up streams between 9.2.0.4 and 10.2.0.1. I am getting similar error. I found some notes on metalink regarding this, Note:4285404.8 and Note:358776.1.
Let me know what you findout.

Similar Messages

  • [8i] ORA-12704: character set mismatch (and other issues)

    I've been trying to put together sample data on this problem since Friday, but I'm having issues. I'm thinking the problem is something specific to the old database I'm trying to work in:
    BANNER
    Oracle8i Enterprise Edition Release 8.1.7.2.0 - Production
    PL/SQL Release 8.1.7.2.0 - Production
    CORE    8.1.7.0.0       Production
    TNS for HPUX: Version 8.1.7.2.0 - Production
    NLSRTL Version 3.4.1.0.0 - ProductionI tried copying over all the data into my test database:
    BANNER
    Oracle Database 10g Express Edition Release 10.2.0.1.0 - Product
    PL/SQL Release 10.2.0.1.0 - Production
    CORE    10.2.0.1.0      Production
    TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
    NLSRTL Version 10.2.0.1.0 - ProductionAnd, I can't duplicate the problem there. In fact, I ran my original query in my test database, using the db llink, the query ran just fine.
    But, I tried to create some sample data anyway to try to get some help here, so, I created 3 tables in my test database as SELECT from the old database (via a db link).
    One table was really the results of a query (with many sub-queries) that was working just fine in the old database. It was the 2nd highest level query that wasn't giving me any problems. (Below, in my query, subquery 'a' runs just fine in the test database also; it's only the top level query that gives me an error.)
    The other two tables I created were just simple sub-sets of the original tables in the old database.
    I ran my query in my test database against those tables, and again, it ran just fine. No character set mismatch error.
    So, based on the tables from the old database, I created the following test tables:
    TEST TABLE DEFINITIONS
    CREATE TABLE     test_inv_1
    (     cust_id          CHAR(10)
    ,     item_id          VARCHAR2(32) -- becomes 96 if I create as select
    ,     match_item_id     CHAR(10)
    ,     docdate          DATE
    ,     tot_amt          NUMBER(5)
    INSERT INTO     test_inv_1
    VALUES('C1000','I0001','I0001',TO_DATE('01/01/2011','mm/dd/yyyy'),1000);
    INSERT INTO     test_inv_1
    VALUES('C1000','I0002','I0002',TO_DATE('01/05/2011','mm/dd/yyyy'),1050);
    INSERT INTO     test_inv_1
    VALUES('C1000','MANUAL ADJUSTMENT','MANUAL ADJ',TO_DATE('01/01/2011','mm/dd/yyyy'),1000);
    INSERT INTO     test_inv_1
    VALUES('C1001','I0003','I0003',TO_DATE('01/01/2011','mm/dd/yyyy'),500);
    INSERT INTO     test_inv_1
    VALUES('C1001','OTHER ADJUSTMENT','OTHER ADJU',TO_DATE('01/01/2011','mm/dd/yyyy'),50);
    INSERT INTO     test_inv_1
    VALUES('C1001','M123','M123',TO_DATE('01/10/2011','mm/dd/yyyy'),150);
    CREATE TABLE     test_btab_1
    (     billing_id          CHAR(10)     NOT NULL -- becomes 30
    ,     payment_terms_cd     CHAR(3)                -- becomes 9
    INSERT INTO     test_btab_1
    VALUES ('I0001', '01');
    INSERT INTO     test_btab_1
    VALUES ('I0002', '01');
    INSERT INTO     test_btab_1
    VALUES ('I0003', '02');
    INSERT INTO     test_btab_1
    VALUES ('M123', 'COD');
    INSERT INTO     test_btab_1
    VALUES ('I0004', '01');
    CREATE TABLE     test_tabm_1
    (     record_type     CHAR(4)          NOT NULL     -- becomes 12
    ,     record_key     CHAR(10)     NOT NULL     -- becomes 30
    ,     numeric_1     NUMBER(15,5)
    ,     numeric_5     NUMBER(7)
    ,     numeric_6     NUMBER(7)
    INSERT INTO     test_tabm_1
    VALUES ('LOCA','A1234',NULL,NULL,NULL);
    INSERT INTO     test_tabm_1
    VALUES ('TERM','01',2,10,30);
    INSERT INTO     test_tabm_1
    VALUES ('TERM','02',0,0,45);
    INSERT INTO     test_tabm_1
    VALUES ('TERM','COD',0,0,30);Again, the first table, test_inv_1, is an example of the results of a query that was working just fine in the old database. (There are comments in the table definitions above--I'll explain those in a bit.)
    Here is the query I ran against this data:
    QUERY
    SELECT     a.*
    ,     1 - (t.numeric_1/100)          AS amt_pst_disc
    ,     a.docdate + t.numeric_5 - 1     AS disc_end_date
    ,     a.docdate + t.numeric_6 - 1     AS duedate
    FROM     (
         SELECT     ic.*
         ,     CASE
                   WHEN     b.payment_terms_cd     IS NULL
                   THEN     CAST('03' AS CHAR(10))
                   ELSE     CAST(b.payment_terms_cd AS CHAR(10))
              END                         AS pay_term
         ,     CASE
                   WHEN     b.payment_terms_cd     IS NULL
                   THEN     'Default Payment Terms'
              END                         AS pt_flag
         FROM     test_inv_1 ic
         ,     test_btab_1 b
         WHERE     ic.match_item_id     = b.billing_id (+)
         ) a
    ,     test_tabm_1 t
    WHERE     a.pay_term     = t.record_key
    AND     t.record_type     = 'TERM'
    ;In the old database, I get the error:
    WHERE   a.pay_term      = t.record_key
    ERROR at line 107:   --this is actually line 22 in the above query, since test_inv_1 represents the results of a sub-query
    ORA-12704: character set mismatchIn my test database, in every form, including with the sample data above, I don't have any problems.
    I unfortunately don't have a v8 test environment, and I suspect there aren't many people who actually do, anymore, so using my v10 test database is the best I can do to come up with test data...
    The other odd thing I noticed is that when I DESC the tables I created in my test database via SELECT statements, and compare them with the tables I created from CREATE statements (based on the table descriptions I got from the old database), some of the data lengths don't match up. That's what's in the comments in my table definitions. I noted where the tables I created via SELECT statements had different data lengths. I'm not sure if it's important or not, but in case it is, I thought I'd include it.
    Also, I'm creating this query to make a report for someone else, and the reporting system only has access to the v8 database, not my test database. So, I'm stuck making the query run against it.
    Any help on this would be greatly appreciated!

    I think it has something to do with my CASE statement. I found a kind of work-around solution. Instead of getting payment_term_cd associated with the item_id, the person I'm creating the report for wants the payment terms associated with the cust_id. Now, btab has the one associated with item_id, and not every item_id is in the btab table, so in my query, I was assuming a default value of '03' when it didn't find a payment_term_cd (i.e. it was NULL) for an item_id, which is what my first CASE statement is doing.
    However, every cust_id definitely has a payment_term_cd associated with it (in another table I did not provide sample data for, since I didn't know I'd need to use it). Here's the general idea of that table:
    CREATE TABLE     test_cust_1
    (     cust_id               CHAR(10)     NOT NULL
    ,     payment_terms_cd     CHAR(3)     --while it's not specified as NOT NULL, there are no NULLs for this column.  I think anything that would be NULL, the system initializes as '***'
    INSERT INTO     test_cust_1
    VALUES ('C1000','01');
    INSERT INTO     test_cust_1
    VALUES ('C1001','03');
    INSERT INTO     test_cust_1
    VALUES ('C1002','COD');So, there's no need for me to do a case statement. I can get away with something like:
    SELECT     ip.item_id
    ,     ip.docdate
    ,     ip.cust_id
    ,     ip.tot_amt
    ,     ip.pay_terms
    ,     t.record_key
    FROM     (
         SELECT     i.item_id
         ,     i.docdate
         ,     i.cust_id
         ,     i.tot_amt
         ,     CAST(c.payment_terms_cd AS CHAR(10))     AS pay_terms
         FROM     test_inv_1 i
         ,     test_cust_1 c
         WHERE     c.cust_id     = i.cust_id
         AND     i.tot_amt     <> 0
         ) ip
    ,     test_tabm_1 t
    WHERE     t.record_key     = ip.pay_terms
    AND     t.record_type     = 'TERM'-- edited out the incorrect results
    Anyway, when I used this new table with my original query in the 8i database, I didn't get a character set error, so that's why I think it has to do with the case statement.
    Edited by: user11033437 on Aug 22, 2011 1:43 PM -- fixed an error in my results

  • ORA-12704: character set mismatch odbc

    Hi I have a query which is working find in most of the machines through ODBC connection. On one oracle server i am getting "ORA-12704: character set mismatch"
    SELECT '' as Col1, Fname from CustTable
    Where FPrefix = ''

    user8971316 wrote:
    Hi I have a query which is working find in most of the machines through ODBC connection. On one oracle server i am getting "ORA-12704: character set mismatch"
    SELECT '' as Col1, Fname from CustTable
    Where FPrefix = ''
    bcm@bcm-laptop:~$ oerr ora 12704
    12704, 00000, "character set mismatch"
    // *Cause: One of the following:
    //         - The string operands(other than an nlsparams argument) to an
    //           operator or built-in function do not have the same character
    //           set.
    //         - An nlsparams operand is not in the database character set.
    //         - String data with character set other than the database character
    //           set is passed to a built-in function not expecting it.
    //         - The second argument to CHR() or CSCONVERT() is not CHAR_CS or
    //           NCHAR_CS.
    //         - A string expression in the VALUES clause of an INSERT statement,
    //           or the SET clause of an UPDATE statement, does not have the
    //           same character set as the column into which the value would
    //           be inserted.
    //         - A value provided in a DEFAULT clause when creating a table does
    //           not have the same character set as declared for the column.
    //         - An argument to a PL/SQL function does not conform to the
    //           character set requirements of the corresponding parameter.
    // *Action:

  • How to fix ORA-12704: character set mismatch

    I am newish to oracle and am trying to work out why the following doesn't work:
    create table utest(test nvarchar2(100));
    insert into utest values('fish');
    select test from utest union select '' from utest;
    I need to be able to do a union on a table with an nvarchar2 fields, where on union, some of the columns are simply ''.
    Not quite sure how to work out which oracle version exactly this is, we are given remote access via JDBC.

    Hi
    i have a similar issue on a customer. unfortunatly i am not able to modify the commands because i am not the developer. but i see in the logfile, that a ORA-12703 - Character Set Missmatch Occours after a specifiec command. after some investigation i found the command:
    SELECT * FROM (SELECT DISTINCT ATTACHMENTID, FTN.USERID, FTN.MSGID, FTN.TYPEFLD, DS.DOCSERVERID, DOCSERVERPATH, DSTYPE,DSENABLED, DA.DATAARCHIVEID,FILENAME, STARTINGPOS, COMPRESSEDSIZE, UNCOMPRESSEDSIZE, MSGDATEHIGH,     MSGDATELOW, FLAGS, STORAGEMETHOD, SUBJECT, FROMFLD FROM CONTAINSATTACHMENT CA RIGHT JOIN FT_NOTIFY FTN ON CA.MSGID=FTN.MSGID , PROFILE P, PROFILELOCATION PL, DATAARCHIVE DA, DOCUMENTSERVER DS WHERE FTN.MSGID >= 547609 AND FTN.MSGID <= 557609 AND P.MSGID=PL.MSGID AND DS.DOCSERVERID=DA.DOCSERVERID AND DA.DATAARCHIVEID=PL.DATAARCHIVEID AND FTN.MSGID=P.MSGID AND FTN.SEARCH_INDEX_ID=2 AND TYPEFLD='A' UNION SELECT DISTINCT NULL AS ATTACHMENTID, FTN.USERID, FTN.MSGID, FTN.TYPEFLD,0 AS DOCSERVERID,'' AS DOCSERVERPATH,0 AS DSTYPE,0 AS DSENABLED,0 AS DATAARCHIVEID,'' AS FILENAME,0 AS STARTINGPOS,0 AS COMPRESSEDSIZE,0 AS UNCOMPRESSEDSIZE,0 AS MSGDATEHIGH,0 AS MSGDATELOW,-1 AS FLAGS, 0 AS STORAGEMETHOD,'' AS SUBJECT, '' AS FROMFLD FROM FT_NOTIFY FTN WHERE FTN.MSGID >= 547609 AND FTN.MSGID <= 557609 AND FTN.SEARCH_INDEX_ID=2 AND TYPEFLD='R') ORDER BY MSGID
    when i replace the "'' AS..." in the bottom of the script with the "cast( '' as nvarchar(255)) AS..." it works as expected. as i sayd, i cant change the code but we have the system working for ages and after we set up a new server, it stops working - so can it be possible that other versions of Oracle (Server or Client) support this without a cast? Or is there some "Special Setting" what can help here?
    Thank you in advance
    Martin

  • Ora-12704: character set mismatch

    I'm trying to insert string data into a nvarchar2 column using jdbc and I keep getting the error, ora-12704: character set mismatch. How do I avoid this without using the translate function? I believe my nls variables are all set correctly. Our software will eventually be in Korean.

    Both my database and national character sets are UTF8.
    We are trying to design a system
    that supports internationalization. Majority
    of our customers will be using English but we do have Korean customers. All their data will be in korean. It is my understanding (and I could be wrong) that the korean character set is varying multi-byte. This understanding has lead me to believe I need to define my "character" columns as nchar and nvarchar2. Is this assumption wrong?
    Also, my nls_lang environment variable is AMERICAN_AMERICA.UTF8. I'm currently running Oracle 8.1.6. We have received 8.1.7 but I haven't upgraded yet.
    Thanks in advance!

  • Install dialog box absent after PSE 13 download to Win 8.1 PC: which Set-up.exe to run?

    PSE 13 downloaded to a Windows 8.1 PC (64 bit OS) then Windows File Explorer opened showing the contents of ‘This PC\Downloads\Package’, namely two folders ‘32 bit PhotoshopElem13’and ‘PSE 13’ having similar contents. There is no guidance as to whether to run the Set-up.exe in the first or the second of these folders.
    An installation dialog box would have been welcome with advice on the choice.
    Which Set-up.exe should be run?
    Is it necessary to keep any contents of the folder ‘This PC\Downloads\Package’ after the installation finishes and the program appears to function properly?

    Hello Mr. Tikkanen.  Thank you very much for your response.
    I remember reading something about the difficulties of USB 3.0 vs. 2.0, but it didn't occur to me to switch my mouse and keyboard plug-in.
    Unfortunately, my employer decided to buy a new Windows 7-capbable cpu this morning instead of having me install Win7 on the current cpu.  I was going to implement your suggestion today, but my copy of 7 was already shipped back by the time I got in today.
    I actually kind of want to try it anyway for the sport of it.  I promise that, if it comes to it and I'm asked to install it later, I will attempt your suggestion and update this forum with my results.
    Thank you, Mr. Tikkannen, and thanks to all you experts that search through the forums and help us get along.  It is very much appreciated.   

  • Need help on  ORA-02074: cannot SET NLS in a distributed transaction

    Hi All,
    I am Writing a plsql Code like this
    DECLARE
    op_job_id NUMBER;
    op_object_version_number NUMBER;
    x_job_definition_id NUMBER;
    op_name VARCHAR2(1000);
    L_VERIFY_FLAG VARCHAR2(1);
    l_error_message VARCHAR2(2000);
    BG_ID NUMBER;
    lv_job_group_id APPS.per_job_groups.job_group_id@SYSTEM_LINK_VISMA%TYPE;
    CURSOR C1 IS SELECT * FROM EBS_PER_JOBS_STG;
    BEGIN
    FOR H1 IN C1
    LOOP
    BEGIN
    IF H1.BUSINESS_GROUP_NAME IS NOT NULL THEN
    SELECT BUSINESS_GROUP_ID,job_group_id INTO BG_ID,lv_job_group_id
    FROM APPS.PER_JOB_GROUPS@SYSTEM_LINK_VISMA
    WHERE DISPLAYED_NAME=H1.JOB_GROUP_NAME;
    END IF;
    EXCEPTION
    WHEN OTHERS THEN
    L_VERIFY_FLAG := 'E';
    l_error_message := 'Entered Job Group Name is Wrong';
    END;
    -->> JOB GROUP ID <<--
    APPS.hr_job_api.CREATE_JOB@SYSTEM_LINK_VISMA
    (p_business_group_id => BG_ID
    ,p_date_from => H1.DATE_FROM
    ,p_approval_authority => H1.APPROVAL_AUTHORITY
    ,p_emp_rights_flag => H1.EMP_RIGHTS_FLAG
    ,p_benchmark_job_flag => H1.BENCHMARK_JOB_FLAG
    ,p_job_group_id => lv_job_group_id
    ,p_job_information1 => H1.JOB_INFORMATION1
    ,p_job_information2 => H1.JOB_INFORMATION2
    ,p_job_information3 => H1.JOB_INFORMATION3
    ,p_job_information4 => H1.JOB_INFORMATION4
    ,p_job_information5 => H1.JOB_INFORMATION5
    ,p_job_information6 => H1.JOB_INFORMATION6
    ,p_job_information7 => H1.JOB_INFORMATION7
    ,p_segment3 => H1.JOB_CODE --JOB_CODE
    ,p_segment6 => H1.JOB_NAME --JOB_NAME
    ,p_job_id => op_job_id
    ,p_object_version_number => op_object_version_number
    ,p_job_definition_id => x_job_definition_id
    ,p_name => op_name);
    dbms_output.PUT_LINE('OUTPUT JOB NAME CREATED : '||op_name);
    END LOOP;
    EXCEPTION
    WHEN OTHERS THEN
    dbms_output.PUT_LINE('Error Message Is: '||SQLERRM);
    END;
    i am running it in Another database Using database link connecting to Apps.
    when i am running it am getting the following Error:
    Error Message Is: ORA-02074: cannot SET NLS in a distributed transaction
    ORA-06512: at "APPS.HR_KFLEX_UTILITY", line 2423
    ORA-06512: at "APPS.HR_KFLEX_UTILITY", line 2380
    ORA-06512: at "APPS.PER_JBT_UPD", line 468
    ORA-02074: cannot SET NLS in a distributed transaction
    ORA-06512: at "APPS.HR_JOB_API", line 878
    Please help me on this, this is quite urgent to me.
    thanks
    sri

    Please see these docs.
    ORA-02074: Cannot SET NLS in a Distributed Transaction [ID 556391.1]
    Portal Used To Call PO_CHANGE_API1_S: ORA-20001: ORA-02074: Cannot SET NLS In A Distributed Transaction [ID 561246.1]Why are Concurrent Programs Calling FND_GLOBAL.APPS_INITIALIZE Using DBLinks Failing? [ID 466800.1]
    ORA-02074 when Executing set_nls over a DB Link [ID 132679.1]
    Thanks,
    Hussein

  • I am unable to view the full content of various web pages after purchasing Advanced System Care Pro. I was using the free version before with no problems. I cannot figure out if or which setting was changed. Please help

    I am unable to view the full content of various web sites after purchasing Advanced System Care Pro. I was using the free version before with no problems. I cannot figure out if or which setting was changed. I tried doing a system restore but that did not work. I tried turning off all features of ASC pro but that did not work. Javascript is enabled. Please help.
    Brian

    Many thanks.
    With those symptoms, I'd try the following document:
    Apple software on Windows: May see performance issues and blank iTunes Store
    (If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

  • Migration from 9i to 11g Transparent Gateway results in a) ORA-12704: character set mismatch b) ORA-02070: database ... does not support SYS_OP_C2C in this context

    Migration from 9i to 11g Transparent Gateway results in a) ORA-12704: character set mismatch b) ORA-02070: database ... does not support SYS_OP_C2C in this context
    What Transparent Gateway (TG) 11g configuration steps prevent the following errors?:
    a) ORA-12704: character set mismatch
    b) ORA-02070: database <DB_link_name> does not support SYS_OP_C2C in this context
    Hints:
    The current 9i TG works with the existing views and packages.  These same db objects will not compile using the new 11g TG.
    The db objects are on an Oracle 10g database linked to an SQL Server 2008 R2 database.
    Since the 9i TG works I assume a configuration to the 11g TG will get it working same as before.  But what...
    Is is something controlled by these parameters?  (Sorry, I don't know how this stuff works.  I'm the application developer.  My DBAs setup the Transparent Gateways.):
      Parameters in the Gateway Startup Shell script:
        ORA_NLS33
        NLS_LANG
      Parameters in the initsid.ora file:
        HS_LANGUAGE
        HS_NLS_DATE_FORMAT
        HS_NLS_DATE_LANGUAGE
    I'm avoiding the known workaround to refactor the VIEWS and PACKAGES to contain CAST() statements to explicitly match the data types.  A server side fix to the 11g TG is preferred. 
    Sample code:
    a) ORA-12704: character set mismatch
       ... is caused by SQL that works with my 9i TG but not with my 11g TG.  It's a snippit from my view that won't compile:
                      select status_code                  -- Oracle VARCHAR2(30)
                      from   ora_app_interfaces
                     UNION
                      select "StatusCode" as status_code  -- SQL Server NVARCHAR(30)
                      from   SqlAppInterfaces
       Example workaround that I'm avoiding:
                      select status_code
                      from   ora_app_interfaces
                     UNION
                      select CAST("StatusCode" as VARCHAR(30)) as status_code
                      from   SqlAppInterfaces
    b) ORA-02070: database <DB_link_name> does not support SYS_OP_C2C in this context
       A line of code in the procedure that compiles correctly but fails to execute:
               -- Insert into SQL Server from Oracle
               insert into PatientMedRecNum ( 
                  "PatID",         -- SQL Server INT
                  "MedRecNum",     -- SQL Server NVARCHAR(11)
                  "Hospital")      -- SQL Server NVARCHAR(30)
               values (
                  pi_pat_id,       -- Oracle NUMBER
                  pi_med_rec_num,  -- Oracle VARCHAR2
                  pi_hospital);    -- Oracle VARCHAR2
    I'd guess the errors are caused by the TG's implicit conversion between the Oracle VARCHAR2 and the SQL Server NVARCHAR... but this works fine on the 9i TG... how do I set it up to work on the 11g TG? 
    Thanks!

    Trace of 11g TG... generating errors due to lack of automatic mapping from SQL NVARCHAR to Oracle NVARCHAR, where the previous 9g TG mapped from SQL NVARCHAR to Oracle VARCHAR2.
    Oracle Corporation --- MONDAY    SEP 22 2014 13:35:08.186
    Heterogeneous Agent Release
    11.2.0.4.0
    Oracle Corporation --- MONDAY    SEP 22 2014 13:35:08.186
    Version 11.2.0.4.0
    Entered hgogprd
    HOSGIP for "HS_FDS_TRACE_LEVEL" returned "DEBUG"
    Entered hgosdip
    setting HS_OPEN_CURSORS to default of 50
    setting HS_FDS_RECOVERY_ACCOUNT to default of "RECOVER"
    setting HS_FDS_RECOVERY_PWD to default value
    setting HS_FDS_TRANSACTION_LOG to default of HS_TRANSACTION_LOG
    setting HS_IDLE_TIMEOUT to default of 0
    setting HS_FDS_TRANSACTION_ISOLATION to default of "READ_COMMITTED"
    setting HS_NLS_NCHAR to default of "UCS2"
    setting HS_FDS_TIMESTAMP_MAPPING to default of "DATE"
    setting HS_FDS_DATE_MAPPING to default of "DATE"
    setting HS_RPC_FETCH_REBLOCKING to default of "ON"
    setting HS_FDS_FETCH_ROWS to default of "100"
    setting HS_FDS_RESULTSET_SUPPORT to default of "FALSE"
    setting HS_FDS_RSET_RETURN_ROWCOUNT to default of "FALSE"
    setting HS_FDS_PROC_IS_FUNC to default of "FALSE"
    setting HS_FDS_MAP_NCHAR to default of "TRUE"
    setting HS_NLS_DATE_FORMAT to default of "YYYY-MM-DD HH24:MI:SS"
    setting HS_FDS_REPORT_REAL_AS_DOUBLE to default of "FALSE"
    setting HS_LONG_PIECE_TRANSFER_SIZE to default of "65536"
    setting HS_SQL_HANDLE_STMT_REUSE to default of "FALSE"
    setting HS_FDS_QUERY_DRIVER to default of "FALSE"
    setting HS_FDS_SUPPORT_STATISTICS to default of "TRUE"
    setting HS_FDS_QUOTE_IDENTIFIER to default of "TRUE"
    setting HS_KEEP_REMOTE_COLUMN_SIZE to default of "OFF"
    setting HS_FDS_GRAPHIC_TO_MBCS to default of "FALSE"
    setting HS_FDS_MBCS_TO_GRAPHIC to default of "FALSE"
    setting HS_CALL_NAME_ISP to "gtw$:SQLTables;gtw$:SQLColumns;gtw$:SQLPrimaryKeys;gtw$:SQLForeignKeys;gtw$:SQLProcedures;gtw$:SQLStatistics;gtw$:SQLGetInfo"
    setting HS_FDS_DELAYED_OPEN to default of "TRUE"
    setting HS_FDS_WORKAROUNDS to default of "0"
    setting HS_FDS_ARRAY_EXEC to default of "TRUE"
    Exiting hgosdip, rc=0
    ORACLE_SID is "xxxDEV"
    Product-Info:
      Port Rls/Upd:4/0 PrdStat:0
    Agent:Oracle Database Gateway for MSSQL
    Facility:hsa
    Class:MSSQL, ClassVsn:11.2.0.4.0_0019, Instance:xxxDEV
    Exiting hgogprd, rc=0
    Entered hgoinit
    HOCXU_COMP_CSET=1
    HOCXU_DRV_CSET=178
    HOCXU_DRV_NCHAR=1000
    HOCXU_DB_CSET=178
    HS_LANGUAGE not specified
    rc=1239980 attempting to get LANG environment variable.
    HOCXU_SEM_VER=102000
    Entered hgolofn at 2014/09/22-13:35:08
    RC=-1 from HOSGIP for "PATH"
    Setting PATH to "C:\oracle\product\11.2.0\tg_2\dg4msql\driver\lib"
    Exiting hgolofn, rc=0 at 2014/09/22-13:35:08
    HOSGIP for "HS_OPEN_CURSORS" returned "50"
    HOSGIP for "HS_FDS_FETCH_ROWS" returned "100"
    HOSGIP for "HS_LONG_PIECE_TRANSFER_SIZE" returned "65536"
    HOSGIP for "HS_NLS_NUMERIC_CHARACTER" returned ".,"
    HOSGIP for "HS_KEEP_REMOTE_COLUMN_SIZE" returned "OFF"
    HOSGIP for "HS_FDS_DELAYED_OPEN" returned "TRUE"
    HOSGIP for "HS_FDS_WORKAROUNDS" returned "0"
    HOSGIP for "HS_FDS_MBCS_TO_GRAPHIC" returned "FALSE"
    HOSGIP for "HS_FDS_GRAPHIC_TO_MBCS" returned "FALSE"
    treat_SQLLEN_as_compiled = 1
    Exiting hgoinit, rc=0 at 2014/09/22-13:35:08
    Entered hgolgon at 2014/09/22-13:35:08
    reco:0, name:abaccess, tflag:0
    Entered hgosuec at 2014/09/22-13:35:08
    uencoding=UTF16
    Entered shgosuec at 2014/09/22-13:35:08
    Exiting shgosuec, rc=0 at 2014/09/22-13:35:08
    shgosuec() returned rc=0
    Exiting hgosuec, rc=0 at 2014/09/22-13:35:08
    HOSGIP for "HS_FDS_RECOVERY_ACCOUNT" returned "RECOVER"
    HOSGIP for "HS_FDS_TRANSACTION_LOG" returned "HS_TRANSACTION_LOG"
    HOSGIP for "HS_FDS_TIMESTAMP_MAPPING" returned "DATE"
    HOSGIP for "HS_FDS_DATE_MAPPING" returned "DATE"
    HOSGIP for "HS_FDS_MAP_NCHAR" returned "TRUE"
    HOSGIP for "HS_FDS_RESULTSET_SUPPORT" returned "FALSE"
    HOSGIP for "HS_FDS_RSET_RETURN_ROWCOUNT" returned "FALSE"
    HOSGIP for "HS_FDS_PROC_IS_FUNC" returned "FALSE"
    HOSGIP for "HS_FDS_REPORT_REAL_AS_DOUBLE" returned "FALSE"
    HOSGIP for "HS_FDS_DEFAULT_OWNER" returned "dbo"
    HOSGIP for "HS_SQL_HANDLE_STMT_REUSE" returned "FALSE"
    Entered hgocont at 2014/09/22-13:35:08
    HS_FDS_CONNECT_INFO = "sqlserverxxx/sqlinstancexxx/SQL_Server_2008_xxx_DEV"
    RC=-1 from HOSGIP for "HS_FDS_CONNECT_STRING"
    Entered hgogenconstr at 2014/09/22-13:35:08
    dsn: sqlserverxxx/sqlinstancexxx/SQL_Server_2008_xxx_DEV, name:xxx_admin
    optn:
    Entered hgocip at 2014/09/22-13:35:08
    dsn:sqlserverxxx/sqlinstancexxx/SQL_Server_2008_xxx_DEV
    Exiting hgocip, rc=0 at 2014/09/22-13:35:08
    Entered shgogohn at 2014/09/22-13:35:08
    ohn is 'OraGtw11g_home2'
    Exiting shgogohn, rc=0 at 2014/09/22-13:35:08
    RC=-1 from HOSGIP for "HS_FDS_ENCRYPT_SESSION"
    using 0 as default value for "HS_FDS_ENCRYPT_SESSION"
    RC=-1 from HOSGIP for "HS_FDS_VALIDATE_SERVER_CERT"
    using 1 as default value for "HS_FDS_VALIDATE_SERVER_CERT"
    Entered hgocont_OracleCsidToIANA at 2014/09/22-13:35:08
    Returning 2252
    Exiting hgocont_OracleCsidToIANA at 2014/09/22-13:35:08
    Exiting hgogenconstr, rc=0 at 2014/09/22-13:35:08
    Entered hgopoer at 2014/09/22-13:35:08
    hgopoer, line 231: got native error 5701 and sqlstate 01000; message follows...
    [Oracle][ODBC SQL Server Wire Protocol driver][Microsoft SQL Server]Changed database context to 'Xxx_XXX_DEV'. {01000,NativeErr = 5701}[Oracle][ODBC SQL Server Wire Protocol driver][Microsoft SQL Server]Changed language setting to us_english. {01000,NativeErr = 5703}
    Exiting hgopoer, rc=0 at 2014/09/22-13:35:08
    hgocont, line 2764: calling SqlDriverConnect got sqlstate 01000
    Entered hgolosf at 2014/09/22-13:35:08
    Exiting hgolosf, rc=0 at 2014/09/22-13:35:08
    DriverName:HGmsss23.dll, DriverVer:07.01.0093 (B0098, U0065)
    DBMS Name:Microsoft SQL Server, DBMS Version:10.00.2531
    Exiting hgocont, rc=0 at 2014/09/22-13:35:08 with error ptr FILE:hgocont.c LINE:2764 ID:SQLDriverConnect
    SQLGetInfo returns Y for SQL_CATALOG_NAME
    SQLGetInfo returns 128 for SQL_MAX_CATALOG_NAME_LEN
    Exiting hgolgon, rc=0 at 2014/09/22-13:35:08
    Entered hgoulcp at 2014/09/22-13:35:08
    Entered hgowlst at 2014/09/22-13:35:08
    Exiting hgowlst, rc=1 at 2014/09/22-13:35:08
    SQLGetInfo returns Y for SQL_PROCEDURES
    SQLGetInfo returns 0x1f for SQL_OWNER_USAGE
    TXN Capable:2, Isolation Option:0xf
    SQLGetInfo returns 128 for SQL_MAX_SCHEMA_NAME_LEN
    SQLGetInfo returns 128 for SQL_MAX_TABLE_NAME_LEN
    SQLGetInfo returns 134 for SQL_MAX_PROCEDURE_NAME_LEN
    HOSGIP returned value of "TRUE" for HS_FDS_QUOTE_IDENTIFIER
    SQLGetInfo returns " (0x22) for SQL_IDENTIFIER_QUOTE_CHAR
    13 instance capabilities will be uploaded
    capno:1992, context:0x0001ffff, add-info:        0
    capno:3042, context:0x00000000, add-info:        0, translation:"42"
    capno:3047, context:0x00000000, add-info:        0, translation:"57"
    capno:3049, context:0x00000000, add-info:        0, translation:"59"
    capno:3050, context:0x00000000, add-info:        0, translation:"60"
    capno:3066, context:0x00000000, add-info:        0
    capno:3067, context:0x00000000, add-info:        0
    capno:3068, context:0x00000000, add-info:        0
    capno:3069, context:0x00000000, add-info:        0
    capno:3500, context:0x00000001, add-info:       91, translation:"42"
      capno:3501, context:0x00000001, add-info:       93, translation:"57"
    capno:3502, context:0x00000001, add-info:      107, translation:"59"
    capno:3503, context:0x00000001, add-info:      110, translation:"60"
    Exiting hgoulcp, rc=0 at 2014/09/22-13:35:08
    Entered hgouldt at 2014/09/22-13:35:08
    NO instance DD translations were uploaded
    Exiting hgouldt, rc=0 at 2014/09/22-13:35:08
    Entered hgobegn at 2014/09/22-13:35:08
    tflag:0 , initial:1
    hoi:0x12ee18, ttid (len 32) is ...
      xxx
      xxx
    tbid (len 10) is ...
      0: 09000F00 0FAC1E00 010A [..........]
    Exiting hgobegn, rc=0 at 2014/09/22-13:35:08
    Entered hgodtab at 2014/09/22-13:35:08
    count:1
      table: XXX_INTERFACE
    Allocate hoada[0] @ 0000000005F58270
    Entered hgopcda at 2014/09/22-13:35:08
    Column:1(InterfaceID): dtype:2 (NUMERIC), prc/scl:20/0, nullbl:0, octet:0, sign:1, radix:10
    Exiting hgopcda, rc=0 at 2014/09/22-13:35:08
    Entered hgopcda at 2014/09/22-13:35:08
    Column:2(TableName): dtype:-9 (WVARCHAR), prc/scl:30/0, nullbl:0, octet:60, sign:1, radix:0
    Exiting hgopcda, rc=0 at 2014/09/22-13:35:08
    Entered hgopcda at 2014/09/22-13:35:08
    Column:3(TableID): dtype:4 (INTEGER), prc/scl:10/0, nullbl:0, octet:0, sign:1, radix:10
    Exiting hgopcda, rc=0 at 2014/09/22-13:35:08
    Entered hgopcda at 2014/09/22-13:35:08
    Column:4(StatusCode): dtype:-9 (WVARCHAR), prc/scl:30/0, nullbl:0, octet:60, sign:1, radix:0
    Exiting hgopcda, rc=0 at 2014/09/22-13:35:08
    Entered hgopcda at 2014/09/22-13:35:08
    Column:5(StatusTimestamp): dtype:93 (TIMESTAMP), prc/scl:23/3, nullbl:0, octet:0, sign:1, radix:0
    Exiting hgopcda, rc=0 at 2014/09/22-13:35:08
    Entered hgopcda at 2014/09/22-13:35:08
    Column:6(InterfaceLog): dtype:-9 (WVARCHAR), prc/scl:400/0, nullbl:1, octet:800, sign:1, radix:0
    Exiting hgopcda, rc=0 at 2014/09/22-13:35:08
    The hoada for table XXX_INTERFACE follows...
    hgodtab, line 1073: Printing hoada @ 0000000005F58270
    MAX:6, ACTUAL:6, BRC:1, WHT=6 (TABLE_DESCRIBE)
    hoadaMOD bit-values found (0x40:TREAT_AS_NCHAR,0x400:UNICODE_COLUMN)
    DTY NULL-OK  LEN  MAXBUFLEN   PR/SC  CST IND MOD NAME
      3 DECIMAL N         22         22 20/  0    0   0   0 InterfaceID
    12 VARCHAR N         60         60 128/ 30 1000   0 440 TableName
      4 INTEGER N          4 4   0/  0    0   0   0 TableID
    12 VARCHAR N         60         60 128/ 30 1000   0 440 StatusCode
    91 DATE N         16         16 0/  0    0   0   0 StatusTimestamp
    12 VARCHAR Y        800        800 129/144 1000   0 440 InterfaceLog
    Exiting hgodtab, rc=0 at 2014/09/22-13:35:08
    Entered hgodafr, cursor id 0 at 2014/09/22-13:35:08
    Free hoada @ 0000000005F58270
    Exiting hgodafr, rc=0 at 2014/09/22-13:35:08
    Entered hgotcis at 2014/09/22-13:35:08
    Calling SQLStatistics for XXX_INTERFACE
    IndexType=SQL_TABLE_STAT: cardinality=0
    IndexType=1: PK_XXX_Interface
    IndexType=3: IX_TableID
    IndexType=3: IX_TableName
    Calling SQLColumns for dbo.SQL_app_INTERFACE
    #1 Column "InterfaceID": dtype=2, colsize=20, decdig=0, char_octet_length=0, cumulative avg row len=15
    #2 Column "TableName": dtype=-9, colsize=30, decdig=0, char_octet_length=60, cumulative avg row len=60
    #3 Column "TableID": dtype=4, colsize=10, decdig=0, char_octet_length=0, cumulative avg row len=64
    #4 Column "StatusCode": dtype=-9, colsize=30, decdig=0, char_octet_length=60, cumulative avg row len=109
    #5 Column "StatusTimestamp": dtype=93, colsize=23, decdig=3, char_octet_length=0, cumulative avg row len=125
    #6 Column "InterfaceLog": dtype=-9, colsize=400, decdig=0, char_octet_length=800, cumulative avg row len=725
    3 Index(es) found:
      Index: PK_XXX_Interface, type=1, ASCENDING, UNIQUE, cardinality=0
    #1 Column 1: InterfaceID
      Index: IX_TableID, type=3, ASCENDING, NON-UNIQUE, cardinality=0
    #1 Column 3: TableID
      Index: IX_TableName, type=3, ASCENDING, NON-UNIQUE, cardinality=0
    #1 Column 2: TableName
    Exiting hgotcis, rc=0 at 2014/09/22-13:35:08

  • Which setting should I have my apple tv set for picture resolution/quality it takes like a whole day for a movie to download before we can watch it

    Which setting should I have my apple tv set for picture resolution/quality as it can take a whole day to download a movie before we can watch it??

    The video/audio display settings should set automatically for the best your TV can handle (720p AppleTV2, 1080p AppleTV3).
    The download resolution for rentals or playback of purchases from the cloud is set in settings for iTunes store.
    Sounds as though you have slow internet.  For near instant streaming of video from iTunes store you need around:
    Standard Definition     2.5 Mbps
    720p HD                    6 Mbps
    1080p HD                  8 Mbps
    Any slower for a given quality setting and the movie has to buffer as it can't keep up in real time.  This might be a few minutes if close to the rated speed or many hours, even overnight.
    As pcd251s suggests you could test internet speed (speedtest.net on a computer for example).  If that is fine, sometimes the LAN if on wifi can be extremely slow in certain locations - ethernet connections would troubleshoot that.
    Slow internet is the common issue here.  AppleTV does not have permanent storage and using it to play other content or browse trailers while a rental is buffering can reset the buffering process.   In such cases you might be better off planning in advance, renting in iTunes, letting the whole thing FULLY download and it will then be available across teh LAN to stream from computer to AppleTV under Computers>iTunes library name>Rentals.
    AC

  • I've recently upgraded to Lightroom5.7.1 and now when I try to import photos a window pops up saying 'the photos can't be imported 'cos the files can't be read'. I had no problems before upgrading. I have Windows8 & can't find any 'app' which sets the typ

    I've recently upgraded to Lightroom5.7.1 and now when I try to import photos a window pops up saying 'the photos can't be imported 'cos the files can't be read'. I had no problems before upgrading. I have Windows8 & can't find any 'app' which sets the type of files I can import. Any help appreciated.

    Well, think about it. This is a Lightroom forum. We are here to answer questions about Lightroom and how to solve problems in Lightroom. Your permissions issue is an operating system issue, not a Lightroom issue. I didn't mean to be sarcastic. But there are plenty of Internet resources that will answer that question.
    I just went to Google and typed in "change disk permissions", and there are links for the Mac as well as for Windows listed. There's no sense in me rewriting instructions that are already available.

  • Limit Preview Size. Which setting are you using?

    I'm not exactly sure how the Limit Preview Size preference affects my workflow. Which setting are you using, and why?
    My preference is currently set to the v2.0 default 1/2 Size. My iMac's resolution is 1680x1050, and I'm using the Canon EOS 1D Mark III taking full size RAW images at 3888x2592.
    regards,
    Gregory

    Gregory,
    I use the default (which is 1/2 size) with no ill effects. Previews are used by external programs to gain access to photos in your Aperture library. (This is not the way your external editor works, though.) Your preview size will not affect your workflow. When previews are turned on, Aperture works on generating previews when you have something new of which to make a preview. I seriously doubt that making a small copy, versus making a smaller copy, would affect how long it takes Aperture (and therefore, how sluggish Aperture might appear.) The difference between making previews and not making previews can be significant.
    nathan

  • Apple TV3 doesn't start automatically when i select airplay from my iMac and Ipad 3. i have to manually turn it on then it works fine after that! what is wrong with which setting.

    Apple TV3 doesn't start automatically when I select airplay from my iMac (Yosemite) and Ipad 3( iOS 8.1.3) i have to manually turn it on then it works fine after that! what is wrong with which setting.

    You need to re install OSX. If you have the dmg file downloaded via torrentz this is how you can create a bootable external HD or Flash drive (8 GB+)
    https://discussions.apple.com/message/23957654#23957654
    Peace
    Harry

  • Terminal command which set background a picture

    hello
    i am search 2 days now to find a terminal command which set a picture as wallpaper but i didnt find anything.
    System/Library/Frameworks/ScreenSaver.framework/Resources/
    ScreenSaverEngine.app/Contents/MacOS/ScreenSaverEngine -background
    I found that this set as background the screen saver. I tried use the path of wallpaper and then -bakcground but i got the message "permission denied".

    the easiest way to do that is using apple script as follows:
    tell application "System Events"
    -- SET DESKTOP TO SPECIFIC PICTURE
    tell current desktop
    set picture rotation to 0 -- (0=off, 1=interval, 2=login, 3=sleep)
    set picture to file "Mac OS X:Library:Desktop Pictures:Plants:Agave.jpg"
    end tell
    end tell
    you can call an apple script from a shell script using osascript command. You can also directly embed it into a shell script using osascript with -e switch.

  • Which Setting do i use in Compressor?

    I am a total newbie in Compressor.
    I have edited my video in FCP and now i need to know which setting to use in Compressor to render my video.  I had used youtube sharing H.264 at 8 MBPS with AAC 44.1kHz Audio but the quality is just not good enough although i do like the file sizes being small around 24mb per video.
    The videos are to be used for the web, i have a number of videos to be rendered and they are all about 3 - 5 min long.  They were recorded in HD and i would like to keep the HD look without having a massive file size.  I would like them to be clean and crisp with exceeding 100mb if possible in fact if they were lower that would be better.
    Thank you

    When I export, I leave the bit rate blank, and quality at high, key frames automatic.. For audio, I use 32Kbps... Start from there then tweak it until you get a smaller file size... you may need to make the diemsions smaller...

Maybe you are looking for