Ora-26040 : data block was loaded using the NOLOGGING option
i have restored full back up database using RMAN sucessfully from one server to another .Restoration process do not contain any error.
New Database contain job when it executes then it leaves mesaage in alert log.
"ORA-01578 oracle data block corrupted file # 6 block # 6888812"
"ORA-26040 data block was loaded using nologging option".
please let me know how it could recovered and prevented.
regards
prabhat
In short, your full backup has happened when a NOLOGGING transaction was on flight. Hence the recovery process should get the transaction's data out of archive logs. BUT the data doesn't exist in archivelog beause the transaction was NOLOGGING. For comprehensive detail read the documents above.
To prevent this situation, backup the database when no NOLOGGING transaction is running.
Similar Messages
-
Can get my .swf files to load using the place option
For our website www.divineunity1.com we have several videos we want our customers and patrions to be able to watch once they visit the website. We ultimately had to use the embedd funtionin flash because we can't get the video to show up using the file-> place method suggested here on Adobe. I contacted live chat and was told that we needed to "make changes to the code which you are using toinsert in muse and use some javascript" but we don't k now how to do this. Can someone guide us through the process or link us to a tutorial of how to do this so that we are able to add flash video players to our site. Thank
Eliana HebrewCurrently, Muse only supports importing SWF files, not FLV. Nor do we support placing MOV, MPEG or other video formats yet. Embedding video in SWF is a possible solution. How is SWF import into Muse not working for you?
You can also embed video from streaming services like YouTube and Vimeo. For more information see this thread:
http://forums.adobe.com/thread/1004462
As for modifying the raw HTML and JS to attach video players, this is possible if you have web programming skills to bring to bear, but the changes you make to your site will not come back (round-trip) into Muse, so this is not advisable. -
ORA-12504 tns listener was not given the SERVICE_NAME in CONNECT-DATA
Hi
i installed a fresh oracle linux and installes 11.2.0 database server. the server works fine but i have a proplem to connect to the database from a windows 2008 r2
client. For the client connection i installed the oracle instantclient on the windows system. Now i want to configure the system dsn to connect to the oracle
server like this
data source description: vSphere 64
description: ----
TNS Service Name: VCDB
user id: system
then i go to TEST connection
Service Name: VCDB
user name: system
Password: mypassword
so i copied the tnsnames.ora from the server to the client
then i get
ora-12504 tns listener was not given the SERVICE_NAME in CONNECT-DATA
here´s my tnsnames.ora from the client
VCDB =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.31.98.173)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = vcdb.vmware)
i tested serveral config´s but nothing works. I can ping the server and also i cn telnet the server on port 1521. The listener on the server works fine
lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 20-SEP-2010 20:48:52
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=vc-db1.mydomain)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 20-SEP-2010 20:47:45
Uptime 0 days 0 hr. 1 min. 7 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/vc-db1/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=vc-db1mydomain)(PORT=1521)))
Services Summary...
Service "vcdb.vmware" has 1 instance(s).
Instance "vcdb", status READY, has 1 handler(s) for this service...
Service "vcdbXDB.vmware" has 1 instance(s).
Instance "vcdb", status READY, has 1 handler(s) for this service...
The command completed successfully
but it´s not possible to create a connection to the server. My enviroment variables are this
ORACLE_BASE=/u01/app/oracle
ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1
ORACLE_HOSTNAME=vc-db1.mydomain
ORACLE_SID=vcdb
ORACLE_TERM=xterm
so i think on the server site everything is correct. How could i establish a connection from the windows client
to the linux database server. Or is ODBC the wrong method for this?
Kind regards
ACID25Hi,
Check the listener log and see if the connection information is logged (in this case with error)
If logged, then we are reaching the correct listener.
Then check tnsping VCDB works fine along with sqlplus connection through listener using VCDB as connect string.
If above both works, then issue can be isolated to ODBC configuration or setup issue.
In case even if the tnsping / sqlplus is failing to connect with VCDB, then worth taking a client sqlent trace at level 16 and listener trace at level 16 to analyse the issue further.
Thanks,
Sathya -
I was not using the cellular data on my Ipad, yesterday I reset my account to start using it again but i can't, please help!!!!!!
I was going to say either that or to remove the email from your email account settings(on ipad) and put it back on. Happens everytime im forced to change my work email password. I need to delete the account and add it again for it to accept the new password.
-
PSA data change not loaded to the target.
Hi all,
We have the data in PSA (it is the master data)- while transferring the data from PSA to the target, system throws error - on analysing the error we found that the characters in the data is wrong, the same was corrected in the PSA - on reloading after correction to the target, system is ignoring the corrected records and loading only the other records.
What could be the reason for this behaviour.
Can experts help.
Regards,
M.MDear Mr.Goud/Murali,
Thank you for your immediate reply and instructions.
Mr. Goud,
The PSA QM status is only green but even then the corrected record is not loaded to the target.
Mr. Murali,
As per your information we do not have an Error DTP - i have only one DTP and we are in BI7.00 - I have deleted the request from the target and corrected the erroneous record and am trying to load only that record by using the filter option in the DTP - still the data is not loaded.
Can you suggest method of adopting - i am not able to understand why that corrected record is not loaded. Is it that manually corrected record in the PSA will not be loaded into the target?
Kindly clarify.
Regards,
M.M -
I have my iPhoto set to an external drive, when it was in use the usb disconected as i was moving my mac air, when i re-conected a message said (your photo library is either in use by another application or has become unreadable).
I have tried shutting it down and then re opening iPhoto but get the same message.
The reason for the external drive was there was not enough room on my hard drive, I have around 7000 photos on it.
is there a simple fix?
Regards
DaleThese are your options:
1. Restore the iPhoto library from the most recent backup that predates the issue.
Advantages: Always works, if library damage is causing the problem and the backup is intact.
Disadvantages: Impossible if you don't have a backup. All changes made since the backup are lost.
2. Repair or rebuild the library. Be sure to back it up first.
Advantages: May solve the problem with no loss of data.
Disadvantages: May fail. May take a long time if the library is large.
3. Scavenge the library with a third-party application called "iPhoto Library Manager," which you can find in a web search. From the application's menu bar (not the iPhoto menu bar), select Library ▹ Rebuild.
Advantages: All images and albums should be preserved.
Disadvantages: All books, calendars, and slideshows will be lost. -
Again: ORA-12504: TNS:listener was not given the SERVICE_NAME...
Hi Guys,
I got this already discussed error and I am sorry, to start a new topic, but I just have no idea what to do else.
I have oracle11g - 32 bit running on my Windows 7 64 bit machine.
The database-server is running fine according to the Database-Control Webinterface.
Connecting with SQLPlus also works
Now my application tries to connect to
Server: localhost
Database: orcl
User: System
PW: myPw
I get: ORA-12504: TNS:listener was not given the SERVICE_NAME in CONNECT_DATA
I was reading many threads here and so I tried to configure the standard-listener using the netmanager with an additional SID named "orcl" which results in this listener.ora:
Line: -----
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = E:\app\Andinger\product\11.2.0\dbhome_1)
(PROGRAM = extproc)
(ENVS = "EXTPROC_DLLS=ONLY:E:\app\Andinger\product\11.2.0\dbhome_1\bin\oraclr11.dll")
(SID_DESC =
(GLOBAL_DBNAME = Oracle8)
(SID_NAME = ORCL)
LISTENER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = Andband)(PORT = 1521))
ADR_BASE_LISTENER = E:\app\Andinger
Line: -----
This is my tnsnames.ora
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = Andband)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
Line: -----
What else could I check? What else could be the reason, that it doesn't work.
I appreciate any help, suggestins, hints... :)
Thanks
Andy
Edited by: 943829 on 01.07.2012 04:56
Edited by: 943829 on 01.07.2012 04:57Thanks for your fast reply!
Attached all the stuff you asked for:
First the result of tnsping:
TNS Ping Utility for 32-bit Windows: Version 11.2.0.1.0 - Production on 01-JUL-2
012 19:19:33
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Parameterdateien benutzt:
E:\app\Andinger\product\11.2.0\dbhome_1\network\admin\sqlnet.ora
Adapter EZCONNECT zur Aufl÷sung des Alias benutzt
Verbindungsversuch mit (DESCRIPTION=(CONNECT_DATA=(SERVICE_NAME=))(ADDRESS=(PROT
OCOL=TCP)(HOST=fe80::341a:eb0:3f57:ff6d%13)(PORT=1521))(ADDRESS=(PROTOCOL=TCP)(H
OST=192.168.0.146)(PORT=1521))(ADDRESS=(PROTOCOL=TCP)(HOST=2001:0:5ef5:79fb:341a
:eb0:3f57:ff6d)(PORT=1521)))
OK (20 ms)
This is the content of sqlnet.ora
# sqlnet.ora Network Configuration File: E:\app\Andinger\product\11.2.0\dbhome_1\network\admin\sqlnet.ora
# Generated by Oracle configuration tools.
# This file is actually generated by netca. But if customers choose to
# install "Software Only", this file wont exist and without the native
# authentication, they will not be able to connect to the database on NT.
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
The status of the Listener:
C:\Users\Andinger>lsnrctl status
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 01-JUL-2012 19:23
:25
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Anmeldung bei (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=Andband)(PORT=1521)))
STATUS des LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 11.2.0.1.0 - Produ
ction
Startdatum 01-JUL-2012 13:07:18
Uptime 0 Tage 6 Std. 16 Min. 7 Sek.
Trace-Ebene off
Sicherheit ON: Local OS Authentication
SNMP OFF
Parameterdatei des Listener E:\app\Andinger\product\11.2.0\dbhome_1\network\admi
n\listener.ora
Log-Datei des Listener e:\app\andinger\diag\tnslsnr\Andband\listener\alert\lo
g.xml
Zusammenfassung Listening-Endpunkte...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=Andband)(PORT=1521)))
Services ▄bersicht...
Dienst "CLRExtProc" hat 1 Instanzen.
Instanz "CLRExtProc", Status UNKNOWN, hat 1 Handler f³r diesen Dienst...
Dienst "Oracle8" hat 1 Instanzen.
Instanz "ORCL", Status UNKNOWN, hat 1 Handler f³r diesen Dienst...
Dienst "orcl" hat 1 Instanzen.
Instanz "orcl", Status READY, hat 1 Handler f³r diesen Dienst...
Dienst "orclXDB" hat 1 Instanzen.
Instanz "orcl", Status READY, hat 1 Handler f³r diesen Dienst...
Der Befehl wurde erfolgreich ausgef³hrt.
And the Listener Service information:
C:\Users\Andinger>lsnrctl service
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 01-JUL-2012 19:24
:37
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Anmeldung bei (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=Andband)(PORT=1521)))
Services ▄bersicht...
Dienst "CLRExtProc" hat 1 Instanzen.
Instanz "CLRExtProc", Status UNKNOWN, hat 1 Handler f³r diesen Dienst...
Handler:
"DEDICATED" eingerichtet:0 abgewiesen:0
LOCAL SERVER
Dienst "Oracle8" hat 1 Instanzen.
Instanz "ORCL", Status UNKNOWN, hat 1 Handler f³r diesen Dienst...
Handler:
"DEDICATED" eingerichtet:12 abgewiesen:0
LOCAL SERVER
Dienst "orcl" hat 1 Instanzen.
Instanz "orcl", Status READY, hat 1 Handler f³r diesen Dienst...
Handler:
"DEDICATED" festgelegt:371 abgelehnt:0 Status:ready
LOCAL SERVER
Dienst "orclXDB" hat 1 Instanzen.
Instanz "orcl", Status READY, hat 1 Handler f³r diesen Dienst...
Handler:
"D000" eingerichtet:0 abgewiesen:0 aktuell:0 max:1022 Status:ready
DISPATCHER <machine: ANDBAND, pid: 3980>
(ADDRESS=(PROTOCOL=tcp)(HOST=Andband)(PORT=49189))
Der Befehl wurde erfolgreich ausgef³hrt.
I hope that you understand it. I installed a german version. If it is a problem, I can install the english version. -
I am getting this error when try to transfer data from an hosted database.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 10.0" Hresult: 0x80004005 Description: "While reading current row from host, a premature end-of-message was encountered--an incoming data stream was interrupted when the server expected to see more data. The host program may have terminated. Ensure that you are using a supported client application programming interface (API).".
How can I work around this?
This is a simple data flow from a SQL 2005 table using SQL 2008 SSIS. going to a SQL 2008 table
ThanksSQL Server MVP http:\\sqlblogcasts.com\blogs\simonsYou can still keep the NVARCHAR computed column in the table, but you cannot use MAX for the length, just use a fixed size and it will work like a charm (i.e. convert the whole result of the computation to NVARCHAR(4000)).
Laurent. -
i have two apple id accounts ,when i used to update application it used to prompt a default id (the old one) and if the application was downloaded using the other id i would cancel and it would prompt the other id but not any more .
it just prompt the old id which im not signed in with im signed in using the new id and when i cancel nothing happens and when i try to update applications separately i have the same problem .
im signed in using the new id
the old one is my wife's so i can't delete it
the problem happens when i update all or each application by its own
using ios 5.0.1 on a iphone 3gs
the applications are downloaded using both the new and old id's
any help will be greatly appreciatedِThese are user-to-user forums, you are not talking to Apple here and they don't monitor these forums - I've asked the hosts to remove yout account ids from your post.
In terms of combining accounts it's not currently possible to do so, nor to copy/transfer content from account to another. -
Transaction data can be loaded into the Fact table without loading the
Transaction data can be loaded into the Fact table without loading the corresponding master data (Example : Sales analysis transaction data can be loaded without populating any of its dimensions master data)
a. True
b. FalseHi Kutti,
True - You need to select the option in the infopackage - alwyas load even if no master data exists.
Bye
Dinesh -
I just got a MacBook Pro and I used Home Sharing to transfer my library from my PC. However, my PC's battery died in the middle of the process so only half of my music was transferred. The sharing option no longer shows up on the left. Do I need to start completely over and delete the content in my new library to prevent duplicates or is there a way to continue the process?
I just got a MacBook Pro and I used Home Sharing to transfer my library from my PC. However, my PC's battery died in the middle of the process so only half of my music was transferred. The sharing option no longer shows up on the left. Do I need to start completely over and delete the content in my new library to prevent duplicates or is there a way to continue the process?
-
How to remove preinstalled files of adobe photoshop from my mac mini so that i can install a new version of the same software.The previous version was removed using the app cleaner software.Could not continue installation of the new version because of the existance of files from the previous version.plz help
What "app cleaner software" ? I ask because installing Photoshop over a previous version has never been a problem. Perhaps your difficulty stems from another source, eg. "cleaner software" ?
If you look in your hard drive, at the root level there is a Library. In there is a folder called Application Support, and in that you will find a folder called Adobe. Files from your previous version are there.
However, I urge you to call Adobe support to make sure you are not doing anything that would mess up other Adobe applications.
http://www.adobe.com/support/connect/connecthostedsupport.html -
Ora-01113 and ora-01110 -- Data Block Corruption
Running 10g no backup and noarchivelog.
I put the datafile offline so I can bring up the database. Can anyone help me figure out how to fix the Bad datafile?
Thank You,TRACE FILE INFORMATION
SQL> select pa.value || '/' || i.instance_name || '_ora_'
2 || pr.spid || '.trc' as trace_file
3 from v$session s, v$process pr, v$parameter pa, v$instance i
4 where s.username = user and s.paddr = pr.addr
5* and pa.name='user_dump_dest';
TRACE_FILE
/oracle/admin/ora9i/udump/ora9i_ora_25199.trcDUMPING A TABLE BLOCK
SQL> select file_id,block_id,bytes,blocks
2 from dba_extents
3 where owner='P' and segment_name='EMP';
FILE_ID BLOCK_ID BYTES BLOCKS
3 9 65,536 8next is to find out the tablespace name and the datafile...
SQL> select tablespace_name,file_name from dba_data_files
2 where relative_fno = 3;
TABLESPACE_NAME FILE_NAME
USER_DATA /oradata3/ora9i/user_data01.dbfNow that we know which file and blocks hold our table, let’s dump a sample block of the table. This is done as follows:
SQL> alter system dump datafile 3 block 10;System altered.
Let’s now look at the contents of dumping one block.
Start dump data blocks tsn: 3 file#: 3 minblk 10 maxblk 10
buffer tsn: 3 rdba: 0x00c0000a (3/10)
scn: 0x0000.00046911 seq: 0x02 flg: 0x04 tail: 0x69110602
frmt: 0x02 chkval: 0x579d type: 0x06=trans data
Block header dump: 0x00c0000a
Object id on Block? Y
seg/obj: 0x6d9c csc: 0x00.46911 itc: 2 flg: O typ: 1 - DATA
fsl: 0 fnx: 0x0 ver: 0x01
Itl Xid Uba Flag Lck Scn/Fsc
0x01 xid: 0x0005.02f.0000010c uba: 0x00806f10.00ca.28 C--- 0 scn 0x0000.00046900
0x02 xid: 0x0003.01c.00000101 uba: 0x00800033.0099.04 C--- 0 scn 0x0000.00046906
This is the beginning of the data block dump. The first line tells us that we are dumping file#3, starting at block# 10 (minblk), and finishing with block# 10 (maxblk). Had we dumped more than one data block, these values would represent a range. The relative data block address (rdba) is 0x00c0000a. For more information on the rdba, refer to a later section in this paper. At the end of this line, we can see in parentheses that the rdba corresponds to file# 3, block# 10 (3/10).
The third line describes the SCN of the data block. In our case, the SCN is 0x0000.00046911. The tail of the data block is composed of the last two bytes of the SCN (6911) appended with the type (06) and the sequence (02). If the decomposition of the tail does not match these three values, then the system knows that the block is inconsistent and needs to be recovered. While this tail value shows up at the beginning of the block dump, it is physically stored at the end of the data block.
The block type shows up on the fourth line. Some of the valid types correspond to the following table:
Type Meaning
0x02 undo block
0x06 table or index data block
0x0e undo segment header
0x10 data segment header block
0x17 bitmapped data segment headeri hope it will help... -
errors (-50) occured when i was using the purchased option from the Quick Links section in the top right corner of the iTunes homepage in my iTunes application on my computer.
what is it?Quoted from the link I provided you with, in your other post.
These alerts occur due to timeouts or conflicts trying to write a file during download.
If you encounter this issue while accessing iTunes Store:
See iTunes 9: "One Moment Please" or "Error (-50)" message when accessing iTunes Store
If you encounter this issue while while downloading something from the iTunes Store:
Delete your iTunes Downloads folder, located in:
Mac OS X: ~/Music/iTunes/iTunes Media/Downloads Note: "iTunes Media" may appear as "iTunes Music. Also, the tilde (~) refers to your Home directory.
Windows Vista: \Users\username\Music\iTunes\iTunes Media\Downloads\
Windows 7: \Users\username\My Music\iTunes\iTunes Media\Downloads\
Windows XP: \Documents and Settings\username\My Documents\My Music\iTunes\iTunes Media\Downloads\
After locating your iTunes Downloads folder:
Quit iTunes.
Delete the Downloads folder on your computer.
Open iTunes.
Choose Store > Check for Available Downloads.
Enter your account name and password.
If you encounter this issue while while downloading Digital Copies using Windows:
Use MSCONFIG (directions for Windows XP and Windows Vista/Windows 7) to disable conflicting software.
If using MSCONFIG steps resolves the issue, you may want to use the System Configuration Utility to turn on the third-party System Services and Startup Items one at a time (restarting your computer after turning on the item or items) to identify which System Service or Startup Item is causing the conflict.
You can turn all of them back on by selecting the Normal Startup option under the General tab of the System Configuration Utility window, but please note that this may cause the issue to reoccur.
If you are able to isolate the issue to a particular third-party software, you may wish to contact them to let them know of the conflict. -
When I try to access websites I get error message. Examples are e-bay or microsoft help.
The connection was reset
The connection to the server was reset while the page was loading.
The site could be temporarily unavailable or too busy. Try again in a few moments.
If you are unable to load any pages, check your computer's network connection.
If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.Hi!
Does this occur with other browsers? Is this will all websites you are trying to visit?
Thanks!
Maybe you are looking for
-
Text Printing in Purchase Order SapScript
Hi Abapers, I am chaniging an existing SapScript that was not working properly. Client wants to print "Item Text" in output which is of 3 to 4 page. where as there is only one line item in PO. Also there is "Header Text" of 1 page. Client wants to d
-
I have seen questions very simiar to this one, but not precisely the same. I spoke with your enterprise support division and they said it is possible to create fillable forms using Adobe Acrobat 7.0 standard or Adobe Acrobat 6.0 Professional. Is th
-
i have 5gb of icloud storage, used 2.5gb but it wont let me unlock the other 2.5gb of storage. How can i use the remainig 2.5gb of storage?
-
I bought the minimum package for Internet and I am trying to check my Facebook but it tells me....... Response Error. Technical description: 502 Bad Gateway - Response Error, a bad response was received from another proxy server or the destination or
-
Website buttons don't work (Firefox Mobile)
Buttons work in Chrome but not in Firefox. I'm hoping its a simple problem to fix but I'm no expert. Could you guys please help me? Site affected: http://n9access.zxq.net/