ORA-27063: number of bytes read/written is incorrect
Hello -
I am getting this error because my filesytem is at 100%:
ORA-01114: IO error writing block to file 202 (block # 423324)
ORA-27063: number of bytes read/written is incorrect
However, when I query the dba_data_files, and v$datafile views, I do not see a reference to file 202. Where can I get this information?
Thanks,
Mike
Mike,
Looks like you got a solution, however, just FYI, tempfiles are numbered starting w/ db_files+1, so, likely, your value of db_files is 200, the error occurred on your number 2 tempfile.
-Mark
Similar Messages
-
Hello every one
I am getting this in my event log from time to time . not sure what is that ?
Is this a hacker trying to send rubbish data to SQL through the port ?
Any help is appreciated .
Length specified in network packet payload did not match number of bytes read; the connection has been closed. Please contact the vendor of the client library. [CLIENT: someip]Thank you all for the reply ,
my server is on port 1533 . Port 1433 is closed on my server .
All the requests are coming from my own ip , i feel this is funny .
Is my server hacked then ?
Or could be my ISP doing any routine tests ?
Also is this is hack attempt , what does this hacker think he will benefit from this ? Could this bring the SQL server down ?
I was thinking about chaning port to something else , 1344 or something , u think this can be better ? -
Easily read strings while tracking the number of bytes read?
Hi all,
I'm after a way to easily parse and read strings from a file, while also being able to check (at any point) how many bytes have currently been read from that file.
I currently use the following for the string processing:
BufferedReader in = new BufferedReader(new FileReader(filename));
String str = null;
while ((str = in.readLine()) != null)
// process the string
}That's all fine, but the files I'm reading can be very large (multi GB) so obviously it can take a while to read them. During this time I pop up a progress bar, and attempt to track the progress of the read. The files I'm working with just now come with a header on the first line that states how many "somethings" (that I happen to be looking for) will appear in the file. I can use that number to set the maximum value for the progress bar, and update its current value as I find them.
However... I'm also about to start working with files that don't contain this information. I've thought of two ways of knowing how much work has to be done in advance of the read so the maximum value for the progress bar can be set:
1) Quickly count the number of lines in the file without doing any processing. This works, but can still take some time for large files, even with more efficient reading algorithms.
2) Use File.length() to set the maximum to be the number of bytes that will read.
I'd like to use 2), but can't work out a way to use simple String based file parsing (as in the code above), but also be able to know how many bytes have been read so far. Using this code means I don't have to worry about end of line terminators, charset encoding, etc - the Reader does it for me.
Any suggestions?
Thanksimport javax.swing.*;
Component parent; // might be null, or your JFrame
String message; // message to display in the progress bar
BufferedReader br = new BufferedReader(new InputStreamReader(new ProgressMonitorInputStream(parent, message, new FileInputStream(file)), charset)); -
ORA-01110,ORA-01114,ORA-27063 error
I am running oracle 10.2.0.1.0 on Solaris 10 OS on Sparc machine.
My oracle server often goes shutdown when i am performing the update operation on different tables. I could not understand the reason for its shutdown. According to log file, error occurred due to media failure but disk was fine and on starting up the oracle instance, every thing became fine. Can anybody kindly, tell me the reason for its shutdown ?
Following is the info of log file.
Thread 1 advanced to log sequence 1414
Current log# 3 seq# 1414 mem# 0: /datafiles/mqa/redo03.log
Thu Apr 3 15:49:42 2008
Errors in file /u01/app/oracle/product/10.2.0/admin/mqa/bdump/mqa_ckpt_27978.trc:
ORA-01110: data file 160: '/OracleStorage/MQA_Data/mqa_SM_Anl3_HS_data.dbf'
ORA-01114: IO error writing block to file 160 (block # 1)
ORA-27063: number of bytes read/written is incorrect
SVR4 Error: 5: I/O error
Additional information: -1
Additional information: 8192
Thu Apr 3 15:50:21 2008
Thread 1 advanced to log sequence 1415
Current log# 1 seq# 1415 mem# 0: /datafiles/mqa/redo01.log
Thu Apr 3 15:51:13 2008
Thread 1 cannot allocate new log, sequence 1416
Checkpoint not complete
Current log# 1 seq# 1415 mem# 0: /datafiles/mqa/redo01.log
Thread 1 advanced to log sequence 1416
Current log# 2 seq# 1416 mem# 0: /datafiles/mqa/redo02.log
Thu Apr 3 15:51:45 2008
KCF: write/open error block=0xd21d1 online=1
file=114 /OracleStorage/MQA_Data/mqa_MSCI2D_data.dbf
error=27063 txt: 'SVR4 Error: 5: I/O error
Additional information: -1
Additional information: 8192'
Thu Apr 3 15:51:45 2008
Errors in file /u01/app/oracle/product/10.2.0/admin/mqa/bdump/mqa_dbw0_27974.trc:
ORA-01242: data file suffered media failure: database in NOARCHIVELOG mode
ORA-01114: IO error writing block to file 114 (block # 860625)
ORA-01110: data file 114: '/OracleStorage/MQA_Data/mqa_MSCI2D_data.dbf'
ORA-27063: number of bytes read/written is incorrect
SVR4 Error: 5: I/O error
Additional information: -1
Additional information: 8192
DBW0: terminating instance due to error 1242
Termination issued to instance processes. Waiting for the processes to exit
Instance terminated by DBW0, pid = 27974Hi Mozzam
the memory manager on 10.2 sends these messages but they are said not to be fatal (i.e. shutting down your database) unless you get a 4031. Read the metalink doc 330239.1 about that. Have you tried to size your sga properly? Is your db still crashing after you switched async io off?
Best regards
Matti
Message was edited by:
matti -
ORA-16038, ORA-19502 and ORA-27063 messages in DB16
Hi experts,
I found below messages in DB16.(SAP version ECC 6.0 & oracle 10.2.0.2)
ORA-16038 Check 11.04.2011 21:00:04 - Time: 2011-04-11 09.47.15, line: ORA-16038 signalled during: ALTER DATABASE OPEN...
ORA-19502 Check 11.04.2011 21:00:04 - Time: 2011-04-11 05.25.41, line: ORA-19502: write error on file "/oracle/QO1/oraarch/QO1arch1_161
ORA-27063 Check 11.04.2011 21:00:04 - Time: 2011-04-11 05.26.19, line: ORA-27063: number of bytes read/written is incorrect
Please suggest me to avoid those errors and are those messages serious errors or not.
Thanks in advance !!!!!!!
Regards
Veera
Edited by: Veerab on Apr 12, 2011 11:49 AMHi!
Have you checked there are enough space on disk where arch-files are located? Those error messages normally indicate full disk.
Try to change or add another arch destination on another disk to be shore not losing any arch-files.
Use db-verify to check files for block corruption.
If you find block corruption, let your storage-people know and ask them to do a check of disk on OS-level.
Please verify your backups to be shore you doesn't have trouble with files backed up.
Regards
Audun
DBA -
Hi All !
I'm use Oracle 10.2.0.3 RAC 2 node, SunOS 5.9.
wish to create new ASM-group, on the basis of the device in /dev/md/rdsk, I receive following:
ERROR at line 1:
ORA-15018: diskgroup cannot be created
ORA-27063: number of bytes read/written is incorrect
SVR4 Error: 22: Invalid argument
Additional information: -1
Additional information: 65536
Help me please !Do you able to scan the disk? Check the permission of the disks.
Also there is known issue with asm disk creation in solaris. We need to leave the first cylinder. You may refer metalink note 271621.1
Ashok -
How do I write and read a specified number of bytes using C++?
I need to send one byte commands followed by 1 or 2 byte data as well as read 1 or 2 byte commands from a RS232 device. How do I ensure that only 1 byte is sent for the commands or 2 bytes of data using VISA?
Hey BMas05,
Using VISA in C++ you can strings or bytes depending on which polymorphic version of the write you are using. One of the parameters for the VISA Write is the byte array and the number of bytes. This is if you are using the VISA classes for C++. You might have to have Measurement Studio to get these classes.
There is a really good example that installs on your computer at C:\Program Files\National Instruments\MeasurementStudio\VC\Examples\Io\Visa\Serial Visa.
This example shows how you can write just bytes or strings and you can select how many bytes to read back.
I hope this helps out.
JoshuaP
National Instruments -
Reading unknown number of bytes !
Hi all !
I am trying to read unknown number of bytes from the socket.Meanwhile I need to process the bytes depending on the message type in the header.I get messages like this header,body,header,body header,body header,body.....the message type is specified in the header.Each message type has different body size.So depending on that I have to read the next few bytes from the socket....say 300 or 600 depending the on the message type in the header.I get the bytes continioulsy like this.Since I cannot read byte by byte due performance reason is there any other way to do that.....any help will appreciated
sashA simple workaround is to use a java.io.PushbackInputStream
Read enough bytes to get the header, parse the header bytes, and push the remainder back into the stream to be read as the body. -
Reading unkown number of bytes
Hi all !
I am trying to read unknown number of bytes from the socket.Meanwhile I need to process the bytes depending on the message type in the header.I get messages like this header,body,header,body header,body header,body.....the message type is specified in the header.Each message type has different body size.So depending on that I have to read the next few bytes from the socket....say 300 or 600 depending the on the message type in the header.I get the bytes continioulsy like this.Since I cannot read byte by byte due performance reason is there any other way to do that.....any help will appreciated
sashAssuming you have a consistent header size and format, you can just read that in one call. I prefer sticking the size of body in the header. That way I can pluck that value out of the header and use it for the next read.
-
TCP/IP Read - How do I find the number of bytes available
It appears that this is not directly possible. I am trying to get around
this by doing a tcp/ip buffered read with a very short timeout (0 or 1ms).
In theory it seems like I should be able to keep making the read call until
the exact number of bytes (4 in this case) pops out. It mostly works but
every so often hangs for some period of time and then resumes getting the 4
byte packets. Anybody have any idea what is going on?The first thing I'm thinking of is that your delay is too short. Also, try to increase the packet length or use Immediate Mode (even CRLF MODE if you're transmitting text).
Another idea (if your application really needs that and you have LV / Windows) is to use MS Winsock Control (wait for DataArrival event and read BytesReceived).
Anyway, tune in your communication (packets and delays) taking in account details about your network or modem.
Good luck! -
Extract certain bytes number of bytes from file
If I wanted to extract a certain number of bytes from a DataInputStream what would the best way to stop the copy after a certain number of bytes?
would the use of the written field of the stream do?
has anyone got any suggestions?
Cheers :)is this a trick question or would this do what you want?
Here's the javadoc from the "read" method of the DataInputStream Class:
int read(byte[] b, int off, int len)
Reads up to len bytes of data from the from the contained input stream into an array of bytes. -
How to get the number of bytes at TCP port
Hi all,
How to get the number of bytes to read at the TCp port...as someone had suggested in some forum we do read the number of bytes first and then pass this...
but we get a problem when we have FF data in this...because then it sends 2 FF data...and cause of this we skip the last data...is there any solution for the same?Hi
In LabVIEW you don't have the same property as in serail port.
You havn't "Byte at TCPIP port".
if you developp a protocol, one soltion, is to send the size to read.
Ingénieur d'Application / Développeur LabVIEW Certifié (CLD)
Application Engineer / LabVIEW Certified Developer (CLD) -
Output says "The number of bytes in the file are 0" but the file has bytes
Dear Java People,
Why would an output say a file has 0 bytes when upon doing a search for the file in Windows Explorer it say the file has 1 -4 kbytes ?
for example part of my output was :
"the number of bytes in TryFile3.java are 0"
caused by the following lines of code:
System.out.println("\n" + contents[i] + " is a " +
(contents.isDirectory() ? "directory" : "file\n") +
" last modified on " + new Date(contents[i].lastModified())
+ "\nthe number of bytes in TryFile.java are " + myFile.length());
thank you in advance
below are the two program classes
Norman
import java.io.File;
import java.io.FilenameFilter;
import java.util.Date;
public class TryFile3
public static void main(String[] args)
//create an object that is a directory
File myDir =
new File("C:\\Documents and Settings\\Gateway User\\jbproject\\stan_ch9p369");
File myFile = new File(myDir, "TryFile3.java");
System.out.println("\n" + myDir + (myDir.isDirectory() ? " is" : " is not")
+ " a directory.");
System.out.println( myDir.getAbsolutePath() +
(myDir.isDirectory() ? " is" : " is not") + " a directory.");
System.out.println("The parent of " + myDir.getName() + " is " +
myDir.getParent());
//Define a filter for java source files Beginning with the letter 'F'
FilenameFilter select = new FileListFilter("F", "java");
//get the contents of the directory
File[] contents = myDir.listFiles(select);
//list the contents of the directory
if(contents != null)
System.out.println("\nThe " + contents.length +
" matching item(s) in the directory " + myDir.getName() + " are:\n " );
for(int i = 0; i < contents.length; i++)
System.out.println("\n" + contents[i] + " is a " +
(contents.isDirectory() ? "directory" : "file\n") +
" last modified on " + new Date(contents[i].lastModified())
+ "\nthe number of bytes in TryFile3.java are " + myFile.length());
else {
System.out.println(myDir.getName() + " is not a directory");
System.exit(0);
import java.io.File;
import java.io.FilenameFilter;
import java.util.Date;
public class FileListFilter implements FilenameFilter
private String name; // file name filter
private String extension; // File extension filter
public FileListFilter(String name, String extension)
this.name = name;
this.extension = extension;
// static boolean firstTime = true;
public boolean accept(File diretory, String filename)
//the following line of code can be inserted in order to find out who called the method
// if(firstTime)
// new Throwable("starting the accept() method").printStackTrace();
boolean fileOK = true;
//if there is a name filter specified, check the file name
if(name != null)
fileOK &= filename.startsWith(name);
//if there is an extension filter, check the file extension
if(extension != null)
fileOK &= filename.endsWith('.' + extension);
return fileOK;System.out.println("\n" + contents + " is a " +
(contents.isDirectory() ? "directory" : "file\n") +
" last modified on " + new Date(contents.lastModified())
+ "\nthe number of bytes in TryFile.java are " + myFile.length());I haven't read any of your italicized code, but perhaps there is a good reason why you have "myFile.length()" and not "contents.length()" in this line of code? -
How to reduce the number of bytes for a picture
I want to reduce the number of bytes used for a picture to be sent to a site like Ebay or craigslist. I son't see any options in Iphoto for this purpose.
You can do it in Preview.
Open the image in Preview. Under Tools, click Adjust Size.
Scale it down to the smallest acceptable size (the website should give a suggested resolution).
Then go to File -> Export, save it as a Jpeg.
Smaller size image means smaller file size. -
How can I monitor number of bytes downloaded so I don't go over my plan limit?
I have a limited number of bytes I can download per day. How can I monitor this on a daily usuage?
I think that is exactly what i need. I have downloaded and restarted firefox. I entered the user name and password I use to sign on to the internet and get a red x next to the icon and it is not working. any suggestions?
Maybe you are looking for
-
Error when scheduling a workbook
Has anyone come accross this error before when scheduling a workbook thru the Scheduling Manager in Discoverer Plus 10gR2? "Exceeded maximum query size". All worksheets run to a sucessful completion when you run them one at a time. Thanks Brent
-
How to default info update ticked in RFQ and PO
Dear SAP gurus, In RFQ and PO we are having an indicator for info update. If we activate this indicator, when we create RFQ and PO, this will update the info record. Currently in my system the default is blanked/unticked. Is it possible to make it de
-
Creating Local partitioned index on Range-Partitioned table.
Hi All, Database Version: Oracle 8i OS Platform: Solaris I need to create Local-Partitioned index on a column in Range-Partitioned table having 8 million records, is there any way to perform it in fastest way. I think we can use Nologging, Parallel,
-
Modifying the speed of video clip results in freeze frame
Hi, I am having a trouble with modifying the speed of some clips in FCP 5.14. When I speed it up, the clip looks correct for the first 2/3, but the remaining 1/3 freezes on the last frame that was played. To clarify, the FCP itself is not frozen... i
-
Partner Academy for Quality Management
Hi all, I'm new in QM module. SO please can anyone share the document to me. I need PLM412, PLM420 and PLM425.. thanks a lot.