ORA-28102 in ORACLE POLICY MANAGER

Hi,
I tried to drop a policy in Oracle policy manager and this generate the follow error:
ORA-28102: policy does not exist
ORA-06512: at "SYS.DBMS_RLS", line 308
ORA-06512: at line 1
thanks,
Luis

Hi, yes Oracle 10g can manage Oracle Security Label, you need install the Oracle Client tools for manage it. In Oracle by examples section you can locate the procedure for make this. Review the next link.
http://www.oracle.com/technology/obe/obe10gdb/install/lsinstall/lsinstall.htm
Regards.

Similar Messages

How to install Oracle Policy Manager?

Hi,
I'm trying to install Oracle Policy Manager on a server w/Oracle.
I already have Oracle DB & Client 10gR2 installed and configured, and all is working fine.
I've read that to install Policy Manager, I have to install it from the Client CD. When I did the initial install, I chose 'Administrator' install.
I ran the installer again and chose 'Custom' but didn't see anything that related to Policy Manager.
Where can I find this?
Thanks,
Nora

Hi
OPM, oracle policy manager, is installed with the old enterprise manager.
OPM is to manage VPD, virtuell private database and label security.
Label Security is an extra Option.
Regards
Roman

How to start oracle policy manager

Hello all,
I don't know how start the oracle policy manager on Linux Plataform, I have installed Oracle 9.2.0.4 on RHEL3, thanks for your help

Hi
OPM, oracle policy manager, is installed with the old enterprise manager.
OPM is to manage VPD, virtuell private database and label security.
Label Security is an extra Option.
Regards
Roman

Oracle Policy Manage

Hello forum,
How can I start the application named Oracle Policy Manager?, thanks

on the server
go to programs ->Integreted Management Tools ---> select Policy manager .
give the username pwd and service for the datbase u want to connect
hope this helps

How to run Policy manager in 10g on UNIX

Hi,
I have installed Oracle 10g and I want to install Label Security.
Can anybody let me know how to open Policy Manager in 10g.
I am working on HP-UX platform....
JAI HIND
Darshan

1) Label Security is a separately licensed option - costs extra $;
2) There is a whole manual describing how to use it;
3) oemapp is available from the 'Client' installation CD in 10g;
4) From the manual
"Note that the graphical user interface for the Oracle Policy Manager (OPM) should be used for viewing data only when Oracle Label Security is configured to use the Oracle Internet Directory. OPM can be used to view and modify data only when Oracle Label Security is configured to use the Oracle9i database as its primary repository. OPM can be used to manage VPD regardless of the Oracle Label Security configuration."

VS, ODT and using "Oracle Project"-template requires Policy Management

HI,
I installed the ODT 11.1.0.6.20 and tried to create a new project using the "Oracle Project" but received the following error message: "The project <ProjectName> requires Policy Management. Open this project in Visual Studio.NET Enterprise Developer or Visual Studio.NET Enterprise Architect."
I have tried this using VS 2008 Professional and Team Edition. The operating systems is Vista x64 Ultimate.
Oracle documentation doesn't mention any specific VS version so this is perhaps something else. Is there a workaround or fix to get around this?
TIA,
Kari

OK, I'll give it a try. This suggestion makes perfect sense. I have used that template to create a project before, but noticed that it doesn't contain a windows form by default and so I assumed that it was a build for a n-tier application database access class, which is not necessarily what I want, and so I abandoned the effort. I know I can add a window form. I appreciate the response and will post back my results.
Is there an example project somewhere that I could download and have a look at?
Thanks again for your reply, even though you didn't reply to me. I think you resolved my problem! :-)
Bruce
Edited by: Bruce Davis on Oct 19, 2009 11:07 AM
Edited by: Bruce Davis on Oct 19, 2009 11:11 AM
I replied to the wrong post!

Oracle Test Manager - Import of Manual Tests - Fails with ORA-12520:

Hi,
This issue occurs when we are trying to import manual tests into the Oracle Test Manager.
The import fails when we try to import more than 300 records. The error message in the log
is as shown below:
Driver's SQLSetConnectAttr failed
ORA-12520: TNS:listener could not find available handler for requested type of server
9:50:30:020 - *** DB Exception *** State:S1000,Native:12520,Origin:[Oracle][ODBC][Ora]
State:IM006,Native:0,Origin:[Microsoft][ODBC Driver Manager]
State:S1000,Native:12520,Origin:[Oracle][ODBC][Ora]
No one can logon to the application after this.
According to the DBA the application is using up all the processes in the Database and hence it fails.
When we restart the application service, the number of processes in the database goes down
and the application goes back to normal state.
We keep running into this issue when we try to import >=300 manual tests. (This is not an issue
when runs are imported.)
Anybody else facing this issue? Any ideas as to how this can be resolved?
Thanks
Aruna

Hi,
I had some problems with. So, consider the following:
Simple XLS file :
testname     owner     testdescription               Expected Result
test1          wayne     Login into User Homepage     User can view login prompt
               View Accout Details          User can see account details
               Create simple report          User has access to reports section
               Save as pdf               .pdf generate button is available
               send email               email button is active
               log off                    User can View log off page
So we have four fields, teatname,owner,testdescription and Expected Result.
When we import a test (select Test tab, then project->import data, and select .xls file)
Make sure Select Type is set to Manual Tests
Map      testname -> TestCase ID
     owner -> Owner
     testdescription -> Test Step Action
     Expected Result -> Test step expected result
Make sure Select Type is set to Manual Tests. You should then see one test with all the steps.
Regards
Wayne.
p.s. Thanks Alex!!
Edited by: byrne_wayne on Sep 20, 2010 3:29 PM
Edited by: byrne_wayne on Sep 20, 2010 3:33 PM

Oracle access manager - Policy domain - Return Type

Hi,
I have a requirement where I need to return few LDAP parameter values through Policy domain while redirecting. But the return type should be propertytype and not headervar or cookie. This is SSO integration with websphere using JAAS subject. We have inhouse TAI connector developed for integration between websphere and oracle access manager.
Please help me to resolve this issue.
Regards,
Prashant

Hi Prashant,
OAM can return any type that you want, and OAM will set the name/value for that type - you can put "propertytype" in the type column, and the name and return attribute in the respective fields. "Cookie" and "HeaderVar" are the only types used by OAM WebGates, but your AccessGate (custom in-house connector) should be able to retrieve the values of propertytype that OAM sets.
Regards,
Colin

After ORA-07445, a part of Oracle Enterprise Manager not working?

Hi! Everyone!
My database was have error message ORA-07445.
I found document in MetaLink, and try to modified it.
[https://support.oracle.com/CSP/main/article?cmd=show&type=BUG&id=7038750]
1. SQL> alter system set event='10422 trace name context forever, level 1' scope=spfile;
2. shutdown DB & startup DB
After that, Oracle Enterprise Manager "Space Summary -> Problem Tablespaces " from 5 become 0.
And since these days, it did not change.
This is on solaris 10 oracle 10.2.0.4
How can I make it normal?
Edited by: user10220946 on Nov 24, 2009 6:12 PM
Edited by: user10220946 on Nov 24, 2009 7:33 PM

Hi,
For Ora-07445 and Ora-0600 raise an SR with oracle support.
thanks,
baskar.l

Policy manager not getting up?

I carried out the OBIEE inplace upgrade on Linux RHE 64 bit from 11.1.1.3 to 11.1.1.5.
All the steps were successful as followed from http://docs.oracle.com/cd/E21764_01/bi.1111/e16452/bi_plan.htm.
But at the end when I restarted the OBIEE components the Oracle BI Server was not getting up. The nqserver.log file said that the connection to the policy manager was not established.
So I logged into the enterprise manager to found out that the wsm-pm (Admin Server) is down. When I restarted it , it failed givin the following error in the log file:
#SEARCH_CRITERIA
#     START_TIME: 2011-12-05T12:58:40.955+11:00
#     END_TIME: 2011-12-05T13:58:40.955+11:00
#     MESSAGE_TYPES:INCIDENT_ERROR, ERROR, UNKNOWN
#SELECTED_TARGETS_LIST
#     /Farm_bi_server1/bi_server/AdminServer/wsm-pm:j2ee_application
[2011-12-05T13:57:46.187+11:00] [AdminServer] [ERROR] [] [oracle.adf.share.config.ADFMDSConfig] [host: p1ts2repobi01] [nwaddr: 10.251.32.114] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 991225fc4802b131:-19e9ccfb:1340b8906af:-8000-000000000000050b,0] [APP: wsm-pm] MDSConfigurationException encountered in parseADFConfigurationMDS-01330: unable to load MDS configuration document [[
MDS-01329: unable to load element "persistence-config"
MDS-01370: MetadataStore configuration for metadata-store-usage "OWSM_TargetRepos" is invalid.
MDS-01377: Unable to get database connection from data source configured with JNDI name "jdbc/mds/owsm".
weblogic.common.resourcepool.ResourceDeadException: 0:
Could not connect to 'oracle.jdbc.OracleDriver'.
The returned message is: ORA-01017: invalid username/password; logon denied
It is likely that the login or password is not valid.
It is also possible that something else is invalid in
the configuration or that the database is not available.
oracle.mds.config.MDSConfigurationException: MDS-01330: unable to load MDS configuration document
MDS-01329: unable to load element "persistence-config"
MDS-01370: MetadataStore configuration for metadata-store-usage "OWSM_TargetRepos" is invalid.
MDS-01377: Unable to get database connection from data source configured with JNDI name "jdbc/mds/owsm".
weblogic.common.resourcepool.ResourceDeadException: 0:
Could not connect to 'oracle.jdbc.OracleDriver'.
The returned message is: ORA-01017: invalid username/password; logon denied
Even the MDS upgrade was successful, I am stuck at this point can anyone please help me out?

I carried out the OBIEE inplace upgrade on Linux RHE 64 bit from 11.1.1.3 to 11.1.1.5.
All the steps were successful as followed from http://docs.oracle.com/cd/E21764_01/bi.1111/e16452/bi_plan.htm.
But at the end when I restarted the OBIEE components the Oracle BI Server was not getting up. The nqserver.log file said that the connection to the policy manager was not established.
So I logged into the enterprise manager to found out that the wsm-pm (Admin Server) is down. When I restarted it , it failed givin the following error in the log file:
#SEARCH_CRITERIA
#     START_TIME: 2011-12-05T12:58:40.955+11:00
#     END_TIME: 2011-12-05T13:58:40.955+11:00
#     MESSAGE_TYPES:INCIDENT_ERROR, ERROR, UNKNOWN
#SELECTED_TARGETS_LIST
#     /Farm_bi_server1/bi_server/AdminServer/wsm-pm:j2ee_application
[2011-12-05T13:57:46.187+11:00] [AdminServer] [ERROR] [] [oracle.adf.share.config.ADFMDSConfig] [host: p1ts2repobi01] [nwaddr: 10.251.32.114] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 991225fc4802b131:-19e9ccfb:1340b8906af:-8000-000000000000050b,0] [APP: wsm-pm] MDSConfigurationException encountered in parseADFConfigurationMDS-01330: unable to load MDS configuration document [[
MDS-01329: unable to load element "persistence-config"
MDS-01370: MetadataStore configuration for metadata-store-usage "OWSM_TargetRepos" is invalid.
MDS-01377: Unable to get database connection from data source configured with JNDI name "jdbc/mds/owsm".
weblogic.common.resourcepool.ResourceDeadException: 0:
Could not connect to 'oracle.jdbc.OracleDriver'.
The returned message is: ORA-01017: invalid username/password; logon denied
It is likely that the login or password is not valid.
It is also possible that something else is invalid in
the configuration or that the database is not available.
oracle.mds.config.MDSConfigurationException: MDS-01330: unable to load MDS configuration document
MDS-01329: unable to load element "persistence-config"
MDS-01370: MetadataStore configuration for metadata-store-usage "OWSM_TargetRepos" is invalid.
MDS-01377: Unable to get database connection from data source configured with JNDI name "jdbc/mds/owsm".
weblogic.common.resourcepool.ResourceDeadException: 0:
Could not connect to 'oracle.jdbc.OracleDriver'.
The returned message is: ORA-01017: invalid username/password; logon denied
Even the MDS upgrade was successful, I am stuck at this point can anyone please help me out?

Not able to see the users in Authorization Policy Manager

I have configured a OID provider in the myrealm of weblogic for OES Server. I also added the following lines to jps-config.xml
<serviceInstance provider=”idstore.ldap.provider” name=”idstore.ldap”>
<property value=”oracle.security.jps.wls.internal.idstore.WlsLdapIdStoreConfigProvider” name=”idstore.config.provider”/>
<property value=”oracle.security.idm.providers.stdldap.JNDIPool” name=”CONNECTION_POOL_CLASS”/>
<property name=”idstore.type” value=”OID”/>
</serviceInstance>
Even then I cannot see any of the users from the OID through application policy manager.
Anybody aware of any other settings that need to be done ?
oes server version is 11.1.1.6. and OID is 11.1.1.5.
Any help will be appreciated.
Edited by: ssarkar on May 10, 2012 1:15 PM

externalize the users.

Error while installing oracle identity manager

Im using windows installer. I get error below when installing Oracle Identity Manager, any idea to solve this?
Following Error occured during schema creation connected
ERROR loading database script C:\oracle identity manager\OIM9.0.1.1\installServer\Xellerate/db/oracle/xell.sql!
Please contact your DBA! ORA-06550: line 1,
column 7: PLS-00905: object KOD.PIN_OBJ is invalid ORA-06550: line 1,
column 7: PL/SQL: Statement ignored [12/13/06 11:36 AM]
------------------------------------------------------------------------------

Hi,
I got the same error:
Following Error occurred during schema creation connectedError loading database scriptD:\appl\OIM_902_RC\OIM_902_RC\installServer\Xellerate/db/oracle/xell.sqlPlease contact your DBA!ORA-06550: line 1, column 7: PLS-00905: object VIM_ADMIN.PIN_OBJ is invalid ORA-06550: line 1, column 7: PL/SQL: Statement ignored [12/8/06 5:57 PM]
But I could fix it by dropping the schema and recreate it by only executing the prepare_xl_db.sh script as dba user on database server:
1.     Copy the scripts prepare_xl_db.sh and xell_db_prepare.sql from the distribution CD/Directory to a directory on the machine hosting the database where there is (as the account user performing this task) write permission.
2.     Run the prepare_xl_db.sh script by entering the following command:
./prepare_xl_db.sh
3.     Provide information appropriate for the database and host machine when the script prompts for the following items:
•     The location of the Oracle home (ORACLE_HOME)
•     The name of the database (ORACLE_SID)
•     The name of the Oracle Identity Manager database user to be created
•     The password for the Oracle Identity Manager database user
•     The name of the tablespace to be created for storing Oracle Identity Manager data
•     The directory in which to store the data file for the Oracle Identity Manager tablespace
•     The name of the data file ( no need to append the .dbf extension)
•     The name of the temporary tablespace
4.     Check the prepare_xell_db.lst log file located in the directory where the xell_db_prepare script was run from to see execution status and additional information.

Oracle 8i: Oracle enterprise manager console

Dear all,
I installed oracle 8i (8.1.6) server on linux and client on my own NT
machine. I had no problem to access the database using sqlplus and DBA
studio. I also configured oracle management server and tried to using
Oracle Enterprise Manager Console. Also, there was no problem to discover
the node and to ping agent. But, when I tried to connect to the database,
it gave me the following error message: "ORA-12545: connect failed because
target host or object does not exit". Can someone help me out?
Thanks.
Dewei

add or drop users, Using GUI tools could be sometime dangerous.
You can always use performance diagnostic (oracle provided) to have performance stats in graphical display.
You can also use EM Grid Control (10g) in order to maintain 8i and 9i with 10g EM Grid control.
You need to install an agent on those database in order to communicate with 8i and 9i.
Jaffar

Oracle Enterprise Manager Console Login issue

HI Guys,
I have installed Oracle 10g on my Windows 7 64 bit system and have trouble running Oracle Enterprise Manager Console.
When I open Oracle Enterprise Manager Console it prompts me for a Hostname and SID parameters. For which I have given my System name as the parameter and orcl as the SID.
Then I get an error saying that " Failed to parse tnsnames.ora file ServiceAliasException: 11 "
Please Help!!
Thank you!!
Karthik

The dbconsole needs to be configured, assuming your database instance is up and running ...
For startup info see http://download.oracle.com/docs/cd/B19306_01/server.102/b14196/em_manage002.htm#sthref143

Oracle Enterprise Manager Console TNS-04404 / TNS-04414

Oracle Enterprise Manager Console
Version 10.1.0.2.0 Production
Running on Windows XP Professional
=================================================
Failed to parse tnsnames.ora file
oracle.net.config.ServiceAliasException: TNS-04404: no error
caused by: oracle.net.config.ConfigException:TNS-04414: File error
caused by: TNS-04612: Null RHS for "QCCP1.WORLD":
0
=================================================
(NOTE): I understand that this issues is related to TNSNAMES.ORA file. I have another computer, and the OEM Console is working just fine on that computer. So, I copied the TNSNAMES.ORA file from the other computer, but still I am receiving the same issue.
Please let me know if you can help me with this issue. Thanks in advance ...

878649 wrote:
This problem occur when i run version 10.2 of Console Enterprise Manager
This a very funny error but took me a lot tries and errors to solve it !
I'ts related to the syntax of an entry defining an SID in the tnsnames.ora. This an oracle bug for sure
Here is an entry in my tnsnames.ora
Then why does posted example below NOT contain any "SID" entry?
mydb.world =
*(DESCRIPTION =*
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = myoraclehost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = mydb)
At first look this entry is valid. At least SHOULD BE VALID an understood by oracle tnsnames interpreter
After a couple of tries, i finally found that there should be at least one space between the begining of the line where figure out the description keyword (DESCRIPTION
I've corrected the problem by inserting a space before this keyword.
This happen

ORA-28102 in ORACLE POLICY MANAGER

Similar Messages

Maybe you are looking for