ORA-29786: SIHA attribute GET failed with error [Attribute 'ASM_DISKSTRING'
Hi,
I un-register below services to configure them with solaris SMF (I know oracle won't support SMF yet).
they are running quite good, but only issue we are facing was RBAL create error logs in trace file.
/u01/grid/oracle/product/11.2.0/asm_1/bin/crs_unregister ora.LISTENER.lsnr
/u01/grid/oracle/product/11.2.0/asm_1/bin/crs_unregister ora.DATA.dg
/u01/grid/oracle/product/11.2.0/asm_1/bin/crs_unregister ora.FRA.dg
/u01/grid/oracle/product/11.2.0/asm_1/bin/crs_unregister ora.asm
Errors in file /u01/app/oracle/diag/asm/+asm/+ASM/trace/+ASM_rbal_14028.trc:
ORA-29786: SIHA attribute GET failed with error [Attribute 'ASM_DISKSTRING' sts[200] lsts[0]]
KGGPNP_SIHA: resource 'ora.asm' is not available [200]
KGGPNP_SIHA: attribute 'ASM_DISKSTRING' get failed sts[200] lsts[0]
NOTE: failed to discover disks from gpnp profile asm diskstring
ORA-29786: SIHA attribute GET failed with error [Attribute 'ASM_DISKSTRING' sts[200] lsts[0]]
WARNING::lib=/opt/oracle/extapi/64/asm err:9 rc:opendir location:skgdllOpenDi
errbuf=2
msgbuf=No such file or directory other=Directory does not exist
*** 2011-03-22 11:23:02.281
kfgbRegister: registering group 1/0xB9966B09 (DATA)
kfgbBind: binding kfgpn for group 1/0xB9966B09 (DATA)
kfdp_query(DATA): 7 Edited by: Sachin B on Mar 28, 2011 3:17 AM
Hi, it seems this errors comes from the fact that the asm wasn't registred in the cluster.
so you have ti recreate the asm instance and register this instance in the cluster.
srvctl add asm -p $ORACLE_HOME/dbs/init$+ASM.ora
srvctl config asm
i hope it could help !
Huet Bruno
Senior DBA Brinks France.
Similar Messages
-
Online backup getting failed with error BR0278E - Invalid Argument
Hi All,
Online backup in Production system is getting failed when taken using DB13. Last week the SAP Production Server was migrated to SAN and it was up & running fine.
SAP System - ECC 6
OS - AIX 5.3
Database - Oracle 10g
Even the Archive log backup has been successful, but Online backup is failing. Following is the error log:
BR0280I BRBACKUP time stamp: 2009-09-10 12.00.46
BR0057I Backup of database: RTP
BR0058I BRBACKUP action ID: bebkzprw
BR0059I BRBACKUP function ID: ant
BR0110I Backup mode: ALL
BR0077I Database file for backup: /oracle/RTP/sapbackup/cntrlRTP.dbf
BR0061I 41 files found for backup, total size 97416.297 MB
BR0143I Backup type: online
BR0112I Files will not be compressed
BR0130I Backup device type: tape
BR0102I Following backup device will be used: /dev/rmt3.1
BR0103I Following backup volume will be used: RTPB01
BR0289I BRARCHIVE will be started at the end of processing
BR0134I Unattended mode with 'force' active - no operator confirmation allowed
BR0208I Volume with name RTPB01 required in device /dev/rmt3.1
BR0280I BRBACKUP time stamp: 2009-09-10 12.00.46
BR0226I Rewinding tape volume in device /dev/rmt3 ...
BR0351I Restoring /oracle/RTP/sapbackup/.tape.hdr0
BR0355I from /dev/rmt3.1 ...
BR0241I Checking label on volume in device /dev/rmt3.1
BR0242I Scratch volume in device /dev/rmt3.1 will be renamed to RTPB01
BR0280I BRBACKUP time stamp: 2009-09-10 12.00.46
BR0226I Rewinding tape volume in device /dev/rmt3 ...
BR0202I Saving /oracle/RTP/sapbackup/.tape.hdr0
BR0203I to /dev/rmt3.1 ...
We have checked using different tapes, restarted SAP, etc but could not resolve it.
Please suggest further.
Thanks
VamsiHi Vamsi
Please go through below link
Re: onLine backup fails with error BR0278E
There is similar problem with the exact error you are facing for online backup and its solution is given in above link.
Let us know if this information was useful to you.
with regards,
Parin Hariyani -
Migration Request getting failed with error code 152
Hi Experts,
We are creating a migration request for moving a transport along the path Development-Quality-Production ( tcode /POWERCOR/MRCRE ). But the import into Quality is getting failed with return code 152 and status code E. While the transports without creating the migration request are normal. Please let us know how we can resolve this issue.
Thanks in advance.
Regards,
Surendra Julury,
+91 9611107275Try running the exe remotely on a computer using PSExec under the system context. What happens?
See here for PSExec - you need the -s switch for local system
http://technet.microsoft.com/en-ie/sysinternals/bb897553.aspx
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson
If you do this then you will know. This mimics the behaviour of the ConfigMgr deployment. Use the same .exe -silent etc.
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson -
Gns is getting failed with error CRS-2632 during RAC installation
hello guys i am new to oracle RAC and i am trying to configure two node ORACLE 11G R2 RAC setup on OEL 5.4 using GNS Every things works great till I execute
root.sh script on the first node
It gives me error
CRS-2674: Start of 'ora.gns' on 'host01' failed
CRS-2632: There are no more servers to try to place resource 'ora.gns' on that would satisfy its placement policy
start gns ... failed
Preparing packages for installation...
cvuqdisk-1.0.7-1
Configure Oracle Grid Infrastructure for a Cluster ... failed
Updating inventory properties for clusterware
Starting Oracle Universal Installer...
When i check status of cluster recourse i get this as output
[root@host01 ~]# crs_stat -t
Name Type Target State Host
ora.DATA.dg ora....up.type ONLINE ONLINE host01
ora....N1.lsnr ora....er.type OFFLINE OFFLINE
ora....N2.lsnr ora....er.type OFFLINE OFFLINE
ora....N3.lsnr ora....er.type OFFLINE OFFLINE
ora.asm ora.asm.type ONLINE ONLINE host01
ora.eons ora.eons.type ONLINE ONLINE host01
ora.gns ora.gns.type ONLINE OFFLINE
ora.gns.vip ora....ip.type ONLINE OFFLINE
ora.gsd ora.gsd.type OFFLINE OFFLINE
ora....SM1.asm application ONLINE ONLINE host01
ora.host01.gsd application OFFLINE OFFLINE
ora.host01.ons application ONLINE ONLINE host01
ora.host01.vip ora....t1.type ONLINE ONLINE host01
ora....network ora....rk.type ONLINE ONLINE host01
ora.oc4j ora.oc4j.type OFFLINE OFFLINE
ora.ons ora.ons.type ONLINE ONLINE host01
ora....ry.acfs ora....fs.type OFFLINE OFFLINE
ora.scan1.vip ora....ip.type OFFLINE OFFLINE
ora.scan2.vip ora....ip.type OFFLINE OFFLINE
ora.scan3.vip ora....ip.type OFFLINE OFFLINE
These are my GNS configuration file entries
vi /var/named/chroot/etc/named.conf
options {
listen-on port 53 { 192.9.201.59; };
listen-on-v6 port 53 { ::1; };
directory "/var/named";
dump-file "/var/named/data/cache_dump.db";
statistics-file "/var/named/data/named_stats.txt";
memstatistics-file "/var/named/data/named_mem_stats.txt";
allow-query { any; };
allow-query-cache { any; };
zone "." IN {
type hint;
file "named.ca";
zone "localdomain" IN {
type master;
file "localdomain.zone";
allow-update { none; };
zone "localhost" IN {
type master;
file "localhost.zone";
allow-update { none; };
zone "0.0.127.in-addr.arpa" IN {
type master;
file "named.local";
allow-update { none; };
zone "0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa" IN {
type master;
file "named.ip6.local";
allow-update { none; };
zone "255.in-addr.arpa" IN {
type master;
file "named.broadcast";
allow-update { none; };
zone "0.in-addr.arpa" IN {
type master;
file "named.zero";
allow-update { none; };
zone "example.com" IN {
type master;
file "forward.zone";
allow-transfer { 192.9.201.180; };
zone "201.9.192.in-addr.arpa" IN {
type master;
file "reverse.zone";
zone "0.0.10.in-addr.arpa" IN {
type master;
file "reverse1.zone";
vi /var/named/chroot/var/named/forward.zone
$TTL 86400
@ IN SOA server1.example.com. root.server1.example.com. (
42 ; serial (d. adams)
3H ; refresh
15M ; retry
1W ; expiry
1D ) ; minimum
IN NS server1
IN A 192.9.201.59
server1 IN A 192.9.201.59
host01 IN A 192.9.201.181
host02 IN A 192.9.201.182
host03 IN A 192.9.201.183
openfiler IN A 192.9.201.184
host01-priv IN A 10.0.0.2
host02-priv IN A 10.0.0.3
host03-priv IN A 10.0.0.4
vi /var/named/chroot/var/named/reverse.zone
$ORIGIN cluster01.example.com.
@ IN NS cluster01-gns.cluster01.example.com.
cluster01-gns IN A 192.9.201.180
$TTL 86400
@ IN SOA server1.example.com. root.server1.example.com. (
1997022700 ; Serial
28800 ; Refresh
14400 ; Retry
3600000 ; Expire
86400 ) ; Minimum
IN NS server1.example.com.
59 IN PTR server1.example.com.
184 IN PTR openfiler.example.com.
181 IN PTR host01.example.com.
182 IN PTR host02.example.com.
183 IN PTR host03.example.com.
vi /var/named/chroot/var/named/reverse1.zone
$TTL 86400
@ IN SOA server1.example.com. root.server1.example.com. (
1997022700 ; Serial
28800 ; Refresh
14400 ; Retry
3600000 ; Expire
86400 ) ; Minimum
IN NS server1.example.com.
2 IN PTR host01-priv.example.com.
3 IN PTR host02-priv.example.com.
4 IN PTR host03-priv.example.com.
Please suggest me what i am doing wrong
Edited by: 1001408 on Apr 21, 2013 9:17 AM
Edited by: 1001408 on Apr 21, 2013 9:22 AMHello guys finally i find mistake i was doing
while configuring Public Ip for the nodes i was not giving Default Gateway .I was assuming as all these machine is in same network with same Ip range so they would not be needing Gateway but here my assumption mismatch with oracle well finally happy to see 11G r2 with GNS running on my personal laptop.
cheers
Rahul -
Dehydration failed with error: Use introspectWLS12 command to introspect domains
Hello Experts,
I am trying to Introspect my Oracle weblogic server Locally to configure appliances on my assembly in Virtual Assembly Builder using command
# ./abctl introspectWLS -wlsHome /home/punit/Oracle/Infra/wlserver -domainRoot /home/punit/Oracle/Infra/user_projects/domains/base_domain -adminUser weblogic
but it is getting failed with error:
Use introspectWLS12 command to introspect domains based on WLS 12.1.2 and younger..
Error: OAB-7105: Introspection failed.
Caused by: Dehydrate job failed.
Caused by: OAB-50008: Use introspectWLS12 command to introspect domains based on WLS 12.1.2 and younger.
later I replaced introspectWLS with introspectWLS12 but its throwing Usage error: Command not found: introspectWLS12.
Can somebody help me in finding the exact command for version 12.1.2 to by-pass this..
FYI: I am using fmw_Infra_121200_OVAB.jar binnary bundled with JRF & FM Components on my OEL-6.0 platform
Thanks in Advance
PunitHi,
Thanks for your reply.
This icon you provided means "the DHCP server connected but current user does not have the administrative credentials to manage the server."
That's why "0x80070005. Access is denied" is received.
DHCP console icons reference
http://technet.microsoft.com/en-us/library/cc784812(WS.10).aspx
So, you need to make sure the current user have the administrative credentials to configure DHCP server. Usually members of the DHCP Administrators
group can view and modify any data at the DHCP server. DHCP Administrators can create and delete scopes, add reservations, change option values, create superscopes, or perform any other activity needed to administer the DHCP server, including export or import
of the DHCP server configuration and database. DHCP Administrators perform these tasks using the Netsh commands for DHCP or the DHCP console. For more information, see
DHCP tools.
DHCP groups
http://technet.microsoft.com/en-us/library/cc737716(WS.10).aspx
Hope this helps.
Thanks,
Robbin Meng
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked
post does not actually answer your question. This can be beneficial to other community members reading the thread. -
Hi
We are having 11.2.0.2 database on Linux 5. From last two days the export backup is getting failed with the below error.
. exporting post-schema procedural objects and actions
EXP-00008: ORACLE error 4063 encountered
ORA-04063: package body "SYS.DBMS_CUBE_EXP" has errors
ORA-06508: PL/SQL: could not find program unit being called: "SYS.DBMS_CUBE_EXP"
ORA-06512: at line 1
EXP-00083: The previous problem occurred when calling SYS.DBMS_CUBE_EXP.schema_i
. exporting statistics
Export terminated successfully with warnings.
When I checked the status of this package DBMS_CUBE_EXP its showing invalid. I tried to compile the body of the package. But it was throwing below error.
SQL> show errors
Errors for PACKAGE BODY DBMS_CUBE_EXP:
LINE/COL ERROR
53/5 PL/SQL: SQL Statement ignored
54/10 PL/SQL: ORA-04045: errors during recompilation/revalidation of
SYS.DBA_XDS_INSTANCE_SETS
ORA-01422: exact fetch returns more than requested number of rows
I tried to query this view or describe the above view. But it was throwing the same error.
ERROR at line 1:
ORA-04045: errors during recompilation/revalidation of
SYS.DBA_XDS_INSTANCE_SETS
ORA-01422: exact fetch returns more than requested number of rows
I couldnt get a proper solution from google regarding this view or to compile the above package.
Now we are stcuked without the backups. It would be great if you guys look into it.
Thanks
SHIYAS MYes I tried with take the export with SYS user. This time it thrown the error in the first and last too same as before.
About to export specified users ...
. exporting pre-schema procedural objects and actions
EXP-00008: ORACLE error 4063 encountered
ORA-04063: package body "SYS.DBMS_CUBE_EXP" has errors
ORA-06508: PL/SQL: could not find program unit being called: "SYS.DBMS_CUBE_EXP"
ORA-06512: at line 1
EXP-00083: The previous problem occurred when calling SYS.DBMS_CUBE_EXP.schema_info_exp
. exporting foreign function library names for user U_20102
. exporting PUBLIC type synonyms
. exporting private type synonyms
. exporting object type definitions for user U_20102
About to export U_20102's objects ...
I ran below scripts as per u provided the link
@$ORACLE_HOME/rdbms/admin/catdpb.sql and utlrp.sql
Still it didnt get compiled.
One more thing I tried running expdp. It totally got failed by throwing the similar error. It didnt even export the tables too.
===============================================================================
Processing object type SCHEMA_EXPORT/TABLE/TABLE_DATA
ORA-39126: Worker unexpected fatal error in KUPW$WORKER.GET_TABLE_DATA_OBJECTS []
ORA-31642: the following SQL statement fails:
BEGIN "SYS"."DBMS_CUBE_EXP".SCHEMA_CALLOUT(:1,0,1,'11.02.00.00.00'); END;
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 86
ORA-06512: at "SYS.DBMS_METADATA", line 1245
ORA-04063: package body "SYS.DBMS_CUBE_EXP" has errors
ORA-06508: PL/SQL: could not find program unit being called: "SYS.DBMS_CUBE_EXP"
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 86
ORA-06512: at "SYS.KUPW$WORKER", line 8353
----- PL/SQL Call Stack -----
object line object
handle number name
0x1a3257060 19208 package body SYS.KUPW$WORKER
0x1a3257060 8385 package body SYS.KUPW$WORKER
0x1a3257060 12748 package body SYS.KUPW$WORKER
0x1a3257060 2546 package body SYS.KUPW$WORKER
0x1a3257060 9054 package body SYS.KUPW$WORKER
0x1a3257060 1688 package body SYS.KUPW$WORKER
0x1a8bc1630 2 anonymous block
Estimate in progress using BLOCKS method...
Processing object type SCHEMA_EXPORT/TABLE/TABLE_DATA
ORA-39126: Worker unexpected fatal error in KUPW$WORKER.GET_TABLE_DATA_OBJECTS []
ORA-31642: the following SQL statement fails:
BEGIN "SYS"."DBMS_CUBE_EXP".SCHEMA_CALLOUT(:1,0,1,'11.02.00.00.00'); END;
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 86
ORA-06512: at "SYS.DBMS_METADATA", line 1245
ORA-04063: package body "SYS.DBMS_CUBE_EXP" has errors
ORA-06508: PL/SQL: could not find program unit being called: "SYS.DBMS_CUBE_EXP"
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 86
ORA-06512: at "SYS.KUPW$WORKER", line 8353
----- PL/SQL Call Stack -----
object line object
handle number name
0x1a3257060 19208 package body SYS.KUPW$WORKER
0x1a3257060 8385 package body SYS.KUPW$WORKER
0x1a3257060 12748 package body SYS.KUPW$WORKER
0x1a3257060 2546 package body SYS.KUPW$WORKER
0x1a3257060 9054 package body SYS.KUPW$WORKER
0x1a3257060 1688 package body SYS.KUPW$WORKER
0x1a8bc1630 2 anonymous block
Job "SYS"."SYS_EXPORT_SCHEMA_01" stopped due to fatal error at 17:58:34
========================================================================= -
When I tried to update my iPad I got an error 9. Now, I am unable to access my iPad. It is in a continuous cycle when I try to update or restore the iPad 2. Plug in to iTunes 12.0.1 (latest version). Click update, told can't update, have to restore. Restore fails with error 9. Any help appreciated.
Here's the cycle:
I plug in my iPad when “cable to iTunes shows on iPad screen. It says "Your iPad can't be updated, you must restore it to factory settings." That bad enough news, but it gets worse.
Click Restore
Extracting software…
Preparing iPad for restore
Waiting for iPad…
Verifying iPad restore with Apple…
(empty bar under the Apple logo…does not show any activity)
“The iPad “iPad” could not be restored. An unknown error occurred (9).”
Notes: I just upgraded to OS X Yosemite 10.10.1 on my iMac (27-inch, Mid 2011) in the last week. It’s the first time I’m tried to backup/update my iPad since the iMac update.
I swapped out the USB cable to a new cable and get the same results.
I also unplugged all other USB devices from the iMac and security on my iPad and still get the same results.
I find it strange that it shows no Serial number for my my iPad 2 when plugged in. It shows “Serial Number: n/a on the screen when it displays: “iPad Recovery Mode To update your iPad without erasing its contents, click Update. To restore your iPad to its factory settings, click Restore iPad.
I prefer to update my iPad, but it displays “Your iPad can’t be updated, you must restore it to factory settings. If you previously backed up the iPad, click Restore Backup after the restore process completes.”
It’s a continuous loop. I get the display on my iPad to plug in the iPad to iTunes, plug it in which ends after going through the above procedure saying an error occurred (9).
So now I cannot use my iPad. When I turn it on I get the display showing me to plug it into iTunes with the cable. Since this is the only option I have I plug it in and the loop begins.
Any advice would be appreciated.
Thanks!Hello jaybearden,
Thanks for the question. After reviewing your post, it sounds like you are not able to restore the iOS device since you get an error 9. I would recommend that you read this article, it may be able to help the issue.
Resolve iOS update and restore errors - Apple Support
Check your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
I have not been able to reinstall Acrobat Pro on my laptop. I have Suite 6 Design & Web Premium on my HP laptop. I have Windows 7 operating system. All of a sudden Acrobat Pro will not open so I uninstalled and tried to reinstall the program.
The error messages I get are:
ERROR: Error 2203.Database: C:\Windows\Installer\12102c.ipi. Cannot open database file. System error -2147287035.
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 2203.atabase: C:\Windows\Installer\12102c.ipi. Cannot open database file. System error - 2147287035.
ERROR: Third party payload installer AcroPro.msi failed with exit code: 1603
Help PLEASE!Hi Patricia ,
For error 2203 ,please refer to the following link.
https://helpx.adobe.com/creative-suite/kb/error-2203-install-creative-suite.html
For error 1603 ,refer to this link.
https://helpx.adobe.com/creative-suite/kb/error-1603-install-cs3-cs4.html
Let us know if this solves the issue .If required ,we"ll surely assist you further.
Regards
Sukrit Dhingra -
premiere elements 12, new installation, serial no. accepted, installation completed and new started, but does not run. I get following msg-box: "LoadLibrary failed with error 126: Das angegebene Modul wurde nicht gefunden." Installation in German Language on WIN7 professional 64bit, Samsung SSD. What can I do to run that program?
Jurgen Freund
Premiere Elements 12 on Window 7 64 bit. What video card/graphics card does your computer use - AMD Radeon?
I have found this YouTube video on the subject of Error 126 with details for resolving the problem.
How to fix the ERROR 126 when you open OpenGL programs - YouTube
The link was contributed in an old 2013 thread here by the ID danneomarre (see post 6 of the following thread)
LoadLibrary failed with error 126: cant find the required
Please let us know if that worked for you.
Thank you.
ATR
Add On...When all is OK and working, please update 12 to 12.1 Update using an opened project's Help Menu/Update. -
Standard Data Collection Failing with Error ORA-04054: database link does not exist.
Hi Gurus,
When I am running Standard Data Collection in ASCP(APS) instance R12.1.3, its failing with error : ORA-04054: database link does not exist.
There is no such Database link exits which is showing in above error.
Also the database link name in the above error is not profile values in the database.
I think, concurrent might be fetching this database link name from some tables related to plan.
I am not having much knowledge about how this ASCP/APS works.
Need your help to resolve this issue.
Thanks,Hi,
ASCP Collections looks at the dblink from instances definitions from.
1. Responsibility: Advanced Planning Administrator
2. Navigation: Admin > Instances
You may review the note in support.oracle.com - Understanding DB Links Setup for APS Applications - ASCP and ATP Functionality (Doc ID 813231.1) -
Hi All. Could anyone resolve my issue.
I was created a package with an Script task written in VB.Net.
The Package was executing Successfully in BIDS.
But when i tried to exceute the same using Sql server Agent Job, Its getting Failed with the below error message
"Executed as user: Admin. Microsoft (R) SQL Server Execute Package Utility Version 11.0.2100.60 for 32-bit Copyright (C) Microsoft Corporation. All rights reserved. Started: 5:12:27 PM Error: 2013-03-13 17:12:32.33
Code: 0x00000005 Source: Checking Alcon Files Checking Alcon Files Description: Failed to compiled scripts contained in the package. Open the package in SSIS Designer and resolve the compilation errors.
End Error Error: 2013-03-13 17:12:32.33 Code: 0x00000005 Source: Checking Alcon Files Checking Alcon Files Description: BC30179 - enum 'ScriptResults' and enum 'ScriptResults' conflict
in class 'ScriptMain'., ScriptMain.vb, 156, 22 End Error Error: 2013-03-13 17:12:32.36 Code: 0x00000005 Source: Checking Alcon Files Checking Alcon Files Description: The binary
code for the script is not found. Please open the script in the designer by clicking Edit Script button and make sure it builds successfully. End Error Error: 2013-03-13 17:12:34.28 Code: 0x00000005
Source: Formating Excel Sheet Formating Excel Sheet Description: Failed to compiled scripts contained in the package. Open the package in SSIS Designer and resolve the compilation errors. End Error Error: 2013-03-13 17:12:34.28
Code: 0x00000005 Source: Formating Excel Sheet Formating Excel Sheet Description: BC30179 - enum 'ScriptResults' and enum 'ScriptResults' conflict in class 'ScriptMain'., ScriptMain.vb, 191, 22 End Error
Error: 2013-03-13 17:12:34.29 Code: 0x00000005 Source: Formating Excel Sheet Formating Excel Sheet Description: The binary code for the script is not found. Please open the script in the
designer by clicking Edit Script button and make sure it builds successfully. End Error Error: 2013-03-13 17:12:51.56 Code: 0x00000004 Source: Checking Alcon Files Description:
The binary code for the script is not found. Please open the script in the designer by clicking Edit Script button and make sure it builds successfully. End Error Error: 2013-03-13 17:12:51.56 Code: 0xC0024107
Source: Checking Alcon Files Description: There were errors during task validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 5:12:27 PM Finished: 5:12:51 PM
Elapsed: 24.336 seconds. The package execution failed. The step failed."
Please give some solution to this.
Thanks in advanceAre you editing this job in SQL 2012? Is it wrapping your paths in \"? Like for example does the command line tab on the step look like this:
/FILE "\"D:\yourPathGoesHere.dtsx\"" /CONFIGFILE "\"D:\yourPathGoesHere.dtsConfig\"" /CHECKPOINTING OFF /REPORTING E
That's the problem I had, and I resolved it by recreating the whole thing via SQL Script and getting rid of all those \" things. I think that is preventing SSIS from looking up the precompiled binaries for your Script Task. So you should edit the command
line manually:
/FILE "D:\yourPathGoesHere.dtsx" /CONFIGFILE "D:\yourPathGoesHere.dtsConfig" /CHECKPOINTING OFF /REPORTING E
Please write back whether that helps you. David Dye's answer didn't help me at all. -
Hi,
I'm using Project Server 2013 and I'm not able to publish a workflow in SharePoint Designer 2013, I get this error:
System.InvalidOperationException: Operation failed with error Microsoft.Workflow.Client.ScopeInactiveException: Scope '/SharePoint/default/d7feb9ea-ccb2-4ec3-8f89-2a45b6cf3777' is not in an active state. Its current
state is 'Unregistering'. HTTP headers received from the server - ActivityId: c47ef567-8c54-4ae0-9a1a-1e4fb51320d8. NodeId: TestServer. Scope: /SharePoint/default/d7feb9ea-ccb2-4ec3-8f89-2a45b6cf3777. Client ActivityId : c6e5979c-20f8-e042-1f9d-2cb2a25d7f9e.
---> System.Net.WebExceptio
The thing is that I transferred the databases from a Prod.Env. to the Test Env. and from that moment on the Test Env. stopped working (only workflows), then I
was thinking that maybe the workflow is not working in the Test Environment because when I transferred the databases from Prod Env to Test Env I didn’t transfer the databases related to workflow, I only transferred:
WSS_Content
PWA_ServiceDB
But I didn’t transfer:
SBGatewayDatabase
SBManagementDB
SBMessageContainer01
WFInstanceManagementDB
WFManagementDB
WFResourceManagementDB
I didn’t transfer them because, before, when I transferred DB’s in version 2010, these DB’s were not needed, as the workflows were done using another method.
So, I tried to create a new workflow in the Test Env. but there is no way, I always get that error.
I've tried to Register again the workflow, and the result looks ok, but it doesn't solve the problem:
Register-SPWorkflowService
–SPSite "http://whatever/PWA"
–WorkflowHostUri "http://TestServer:12291"
–AllowOAuthHttp -Force
Do you know how to solve this issue or have an idea to give me some light?
Thank you for your help and regards,
José EspasesLooks like you haven't defined the WF scope or the site where you are trying to deploy the workflow to isn't included in the scope
Check this article
http://fangdahai.blogspot.in/2013/04/on-premise-windows-workflow-server.html
Thanks | epmXperts | http://epmxperts.wordpress.com -
Hey yeah. not much else to say. The title says it all.
I'm trying to register an OCX file that my video editing application requires to work properly.
I'm using a Registry (Regsvr32 and Regsvr64) tool to Register DLL/OCX files. Both bit Registry tools work fine. I can Register any DLL or OCX file with Windows 7 x64 and everything goes smoothly.
But, when in Windows 7 x32, again, no problem with merging the Regsvr32 tool, but when I go to register the OCX file message says it was loaded but the DllRegisterServer failed with error: 0x80004005.
Why does everything work in Windows 7 RC 7100 x64 but not in Windows 7 RC 7100 x32???GA P35 DQ6 Mb, Intel Wolfdale 8600 3.33Ghz C2D CPU., 4x2Gb Mushkin DDR2 1066 PC2 8500 Ascents Memory Mods., PNY-nVidia GE Force 8800 GTS (640MB), 4-Western Digital Caviar SATA(2) HDD's (internal), 1 EIDE-USB External; Hauppauge PVR 1600 TV tuner, Dual Monitor: (1) Standard up top, (1) WideScreen below; Altec Lansing Speakers. Here Kitty, Kitty...that's my Kitty Kat, he's a Kat, because he is kat...kat.I don't know what happened.
My Video Editing software was working fine a few days ago in Windows 7 x64. Tried using it this morning....couldn't load the .mpg video clip. Just stood there looking stupid like it does in the 32-bit version of Windows 7.
I was hoping the x64 version of Windows 7 RC 7100 was going to make a decent run against my XP Pro SP3 setup. When I was able to register the required .ocx file for the video editing application, I thought "cool". I made a TV recording then used the Video Editor to edit it and it worked fine. Earlier this morinng I made another TV recording, went to go edit it and the video editing application couldn't load the .mpg file at all. This problem just annihilated any chance of me ever purchasing Windows 7, 32 or 64-bit.GA P35 DQ6 Mb, Intel Wolfdale 8600 3.33Ghz C2D CPU., 4x2Gb Mushkin DDR2 1066 PC2 8500 Ascents Memory Mods., PNY-nVidia GE Force 8800 GTS (640MB), 4-Western Digital Caviar SATA(2) HDD's (internal), 1 EIDE-USB External; Hauppauge PVR 1600 TV tuner, Dual Monitor: (1) Standard up top, (1) WideScreen below; Altec Lansing Speakers. Here Kitty, Kitty...that's my Kitty Kat, he's a Kat, because he is kat...kat. -
Can somebody please help me, i can not work on my websites anymore. Thanks !!
ERROR: The older version of Adobe Muse CC 2014 cannot be removed. Contact your technical support group.
ERROR: Install MSI payload failed with error: 1603 - Onherstelbare fout bij installatie.
MSI Error message: The older version of Adobe Muse CC 2014 cannot be removed. Contact your technical support group.
ERROR: Third party payload installer Muse_2014_2_CC_LS24.msi failed with exit code: 1603 -
Backup failed with error: 11 -Error: (-41) SrcErr:NO Copying
Like many of you, I was unlucky to get the famous TimeMachine error message: "The backup was not performed because an error occurred while copying files to the backup disk". I started to get as much help as I could from Google and all your forum posts.
Until recently I could not get an easy answer and it seemed that various people had success by:
- renaming their machine to remove say extraneous characters (such as apostrophe)
- delete the last "in progress" backup
- reset the TM
- etc.
I did all of that plus reformatting my new WD HDD but nothing changed. After 2 days of frustration with this piece of software (Time Machine), the good news for me is that I can consistently reproduce the error as well succeed in performing a backup. The solution for me seems to make sure that I +*do not have a source directory structure deeper than 15 levels*+. As soon as I have a file that is 16 levels deep from the root of the HDD that I try to backup, I get this error:
+*Error: (-41) SrcErr:NO Copying /Volumes/<HDD to Backup>/<Deep Directory Structure>... to*+
+*/Volumes/<Your TM Drive>/Backups.backupdb/<Your Machine>/<Timestamp>.inProgress/<AutoGenerated-GUID>/<HDD to Backup>/<Deep Directory Structure>...*+
+*Copy stage failed with error:11*+
+*Backup failed with error: 11*+
The Console app shows the system log with the path to the file that failed during backup. I tried to make the pathname shorter than 255 characters to make sure this is not an 8bit limitation of some string length in the code. Even if I have a path shorter than 255 characters, TM fails with the above error when the source files are at least 16 levels deep in the directory structure.
What is most frustrating about this is not the careless and uninformative error message or this apparently non-sense limitation of 15 levels - it might be something historical in Apple's code - but the lack of documentation. In the absence of proper logging and error handling in this piece of code, wouldn't be nice to have some explanation from Apple with regards to what this error #11 means or perhaps what caused this "Error (-41) SrcErr:NO Copying"? I guess most of us would be just fine to know that as per release notes, Apple has this limitation of 15 levels for the source directory structure.solongpc wrote:
Regardless if this is a general problem or not, does anyone know of any documentation/release notes for common/generic TM error codes? That would be helpful.
Yeah, many of us would love it! But no such thing exists, at least not that us mere mortals can find.
There might be another variable that I don't understand right now but at least it is consistent.
Could it be something funky in the name of one of the folders? Or could the folder object itself be corrupt? Or have some odd extended attribute?
All I can suggest is calling AppleCare, and/or reporting it as a bug:
*_Submitting a +Bug Report+ to Apple._*
|
This requires a membership in the +Apple Developer Connection,+ but you can get one for free.
Register here: http://developer.apple.com/programs/start/register/create.php
Once you receive the confirmation, go to: https://bugreport.apple.com and login.
Click +New Problem+ at the top.
Click Help at the top, and/or any of the items underlined in blue for more information.
Provide as much specific detail as possible, and attach a log, screenshot, etc., as appropriate in the lower section.
When done, click Submit at the bottom.
Maybe you are looking for
-
Security for the Web Analysis reports
I created a report using my user id in Web Analysis studio version 11.1.1.3. When I login as another user, I can't see the report. How do I give access to other users? Do I need to change owner? I created the report under directory, where all the rep
-
Error executing batch file within web application
Hi all, I am trying to execute a batch file from within my web application (struts 1.2). The batch file is being kept inside the 'src' folder. The batch file contains only one command to open NOTEPAD. The code inside my Action class is: URL url = get
-
Multipage word document cannot be printed using webutil
We have the following problem. We are using Oracle Webforms 11g (11.1.1.4). On the server a Word 2010 docx document has been created and needs to be printed locally. We use webutil for this with the following code: -- create a new document app := cli
-
Dynamic array gen....
Hello All, We are facing some problem regarding generating array dynamically. Is it possible to generate array dynamically within program in java. We want to genrate an array, of type byte as shown below. byte datafile1[],datafile2[],datafile3[],data
-
Invalid Credentials 49 Error (OidInfo)
Dear Guys, I work on OID using Java Portlet (JPDK) and i use the following segment of code out.write(pReq.getProviderInstance().getOidManager().getUserProperty(pu.getUserDN(), pu.getSubscriberDN(), "userpassword")); And the result of my sentence is [