ORA-39080: failed to create queues "" and "" for Data Pump job
When I am running datapump expdp I receive the following error:
+++Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Produc+++
+++tion+++
+++With the Partitioning, OLAP and Data Mining options+++
+++ORA-31626: job does not exist+++
+++ORA-31637: cannot create job SYS_EXPORT_SCHEMA_01 for user CHESHIRE_POLICE_LOCAL+++
+++ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95+++
+++ORA-06512: at "SYS.KUPV$FT_INT", line 600+++
+++ORA-39080: failed to create queues "" and "" for Data Pump job+++
+++ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95+++
+++ORA-06512: at "SYS.KUPC$QUE_INT", line 1555+++
+++ORA-01403: no data found+++
Sys has the following two objects as invalid at present after running catproc.sql and utlrp.sql and manual compilation:
OBJECT_NAME OBJECT_TYPE
AQ$_KUPC$DATAPUMP_QUETAB_E QUEUE
SCHEDULER$_JOBQ QUEUE
While I run catdpb.sql the datapump queue table does not create:
BEGIN
dbms_aqadm.create_queue_table(queue_table => 'SYS.KUPC$DATAPUMP_QUETAB', multiple_consumers => TRUE, queue_payload_type =>'SYS.KUPC$_MESSAGE', comment => 'DataPump Queue Table', compatible=>'8.1.3');
EXCEPTION
WHEN OTHERS THEN
IF SQLCODE = -24001 THEN NULL;
ELSE RAISE;
END IF;
END;
ERROR at line 1:
ORA-01403: no data found
ORA-06512: at line 7
Snehashish Ghosh wrote:
When I am running datapump expdp I receive the following error:
+++Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Produc+++
+++tion+++
+++With the Partitioning, OLAP and Data Mining options+++
+++ORA-31626: job does not exist+++
+++ORA-31637: cannot create job SYS_EXPORT_SCHEMA_01 for user CHESHIRE_POLICE_LOCAL+++
+++ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95+++
+++ORA-06512: at "SYS.KUPV$FT_INT", line 600+++
+++ORA-39080: failed to create queues "" and "" for Data Pump job+++
+++ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95+++
+++ORA-06512: at "SYS.KUPC$QUE_INT", line 1555+++
+++ORA-01403: no data found+++
Sys has the following two objects as invalid at present after running catproc.sql and utlrp.sql and manual compilation:
OBJECT_NAME OBJECT_TYPE
AQ$_KUPC$DATAPUMP_QUETAB_E QUEUE
SCHEDULER$_JOBQ QUEUE
While I run catdpb.sql the datapump queue table does not create:
BEGIN
dbms_aqadm.create_queue_table(queue_table => 'SYS.KUPC$DATAPUMP_QUETAB', multiple_consumers => TRUE, queue_payload_type =>'SYS.KUPC$_MESSAGE', comment => 'DataPump Queue Table', compatible=>'8.1.3');does it work better when specifying an Oracle version that is from this Century; newer than V8.1?
Similar Messages
-
ORA-01658: unable to create INITIAL extent for segment in tablespace
NEW REPOSITORY INSTALLATION ERROR!!
I want to install a new Repository using Oracle9iR9.2.0.1 and iDS10g on windowsXP Professional the same machine.
After running all the SQL scripts ( ckqa,ckvalqa,ckcreate,ckreport) with success to installing a new Repository on my Database using "the Scripts Method",I start the Repository Administration Utility( RAU) to scheck the priveleges and so on.
After pressing the Install button in the RAU:
-I take public synonyms
-I scheck the box for "Support Designer Objects", then
-The Repository size is Medium
-I have not change the defauft Tablespace of the Repository_Manager names TEMPORARY_TABLES to store the index and table of System Data....Diagram Data.
After Starting, the Installation began an stop by installing some Tables like schown :
Operation: Started : 07/03/04 20:26:32
Reading File: cktabs.sql
Object : TABLE CDDL_TMP_TBL
Executing statement(s)...
Verifying...
.and so on till....uns so weiter bis
Reading File: cktabs.sql
Object : TABLE RM$INFO
Executing statement(s)...
Error Submitting Definition: User intervention required...
RME-02124: Failed to execute SQL statement: CREATE TABLE RM$INFO
(NAME VARCHAR2(128) NOT NULL
,VALUE VARCHAR2(128)
Storage (initial 4K next 4K pctincrease 0) Tablespace TEMPORARY_TABLES
ORA-01658: unable to create INITIAL extent for segment in tablespace TEMPORARY_TABLES
Dumping Buffer...
CREATE TABLE RM$INFO
(NAME VARCHAR2(128) NOT NULL
,VALUE VARCHAR2(128)
...End of Buffer
User Requested: Stop Process
When I read the Help of the Error the
CAUSE was: Failed to find sufficient contiguous Space to allocate INITIAL extend for Segment being created.
ACTION: Use ALTER TABLESPACE ADD DATAFILE to add additional space to the tablespace or retry with a smaller Value for initial.
I then try to resolve it by schecking and changing the Values of INITIAL_VALUE and NEXT_VALUE in the ckparams.txt to 500k.I change the Values of TEMPORARY_TABLES(10214 to 51200k) and TEMPORARY_INDEXES from (20000 to 100000k).Then I run the scripts @ckparams.txt, @ckvalqa, @ckcreate but
-pressing the Scheck Privileges Button on the RAU still give me 106k for the INITIAL_ and NEXT_VALUE.
-And the installato still stop with the same Error.
Question: How schould I resolve this Configuration?
You could respond in ENGLICH, GERMAN or FRENCH
Thank you for your Help!You are running into database errors. You should refer to the database documentation on how to adjust the size your tablespaces. The online Designer installation guide will advise you as to the sizes of tablespaces you require. (http://otn.oracle.com/pls/wocprod/docs/page/ocom/technology/products/designer/supporting_doc/Des10g_9044/cmnhlp72/rep_insgde/igttl_9i.htm)
Regards
Sue -
OWB 10g -- Can't Create Database Links for Data Source and Target
We installed OWB 10g server components on a Unix box running Oracle 10g (R2) database. The Designer Repository is in one instance. The Runtime Repository and the Target are in another instance. The OWB client component was installed on Windows XP. We create a data source module and a target module in OWB. The data source is on another Unix box running Oracle 9i (R2) database. We try to create database links for data source module and target module, respective. But when we created and tested the DB links, the DB links were failed.
For the database link of data source, we got the following error message:
Testing...
Failed.
SQL Exception
Repository Error:SQL Exception..
Class Name: CacheMediator.
Method Name: getDDEntryFromDB.
Repository Error Message: ORA-12170: TNS:Connect timeout occurred
For the database link of target , we got the following error message:
Testing...
Failed.
API2215: Cannot create database link. Please contact Oracle Support with the stack trace and the details on how to reproduce it.
Repository Error:SQL Exception..
Class Name: oracle.wh.ui.integrator.common.RepositoryUtils.
Method Name: createDBLink(String, String, String, String).
Method Name: -1.
Repository Error Message: java.sql.SQLException: ORA-00933: SQL command not properly ended.
However, we could connect to the two databases (data source and target) using the OWBs utility SQL Plus.
Please help us to solve this problem. Thank you.As I said prior the database link creation should work from within the OWB client (also in 10).
Regarding your issue when deploying, have you registered your target locations in the deployment manager and did you first deployed your target location's connector which points out to your source?
I myself had some problems with database link creations in the past and I can't remember exactly what they were but it had something to do with
- the use of abnormal characters in the database link name
- long domain name used in as names.default_domain in my sqlnet.ora file
What you can do is check the actual script created when deploying the database link so see if there's something strange and check if executing the created script manually works or not. -
ORA-19506:failed to create sequential file.
RMAN offline full backup failed.
We had setup of Oracle RMAN backup with TSM and it was working perfect but few days backup, our team did testing with RMAN-NetBackup on database server and after that our existing backup process started giving error.
Our RMAN backup script is point to TSM but while executing, it shows to point NetBackup and not sure what dependencies are forcing them to point NetBackup.
Oracle- 9i
OS- AIX
Error Message:-
Starting backup at 04-SEP-12 09:21:51
channel t1: starting full datafile backupset
channel t1: specifying datafile(s) in backupset
input datafile fno=00004 name=/u03/oradata/Test/datap_index01.dbf
input datafile fno=00003 name=/u03/oradata/Test/datap_data01.dbf
channel t1: starting piece 1 at 04-SEP-12 09:21:52
released channel: t1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on t1 channel at 09/04/2012 09:37:07
ORA-19506: failed to create sequential file, name="Test_T_FULL_OFFLINE_set2057_piece1_20120904_09nkbf1g_1_1", parms=""
ORA-27028: skgfqcre: sbtbackup returned error
ORA-19511: Error received from media manager layer, error text:
VxBSAValidateFeatureId: Failed with error:
Server Status: cannot connect on socketThanks for respond but issue is slightly different, we have RMAN backup setup with TSM and it was working fine earlier but last week one of our team installed and configured NetBackup with RMAN for testing oracle backup with RMAN-NetBackup and after testing they revert back the changes.
After this testing mine RMAN-TSM backup started giving error and in error it seems to point to NetBackup instead of TSM, however I did check the RMAN script but there is no any changes that point to NetBackup.
I am not sure what changes are causing to point backup to NetBackup instead of TSM.
Please see the complete error message below-
allocated channel: t1
channel t1: sid=11 devtype=SBT_TAPE
channel t1: Veritas NetBackup for Oracle - Release 7.5 (2012050906)*
old RMAN configuration parameters:
CONFIGURE CONTROLFILE AUTOBACKUP ON;
new RMAN configuration parameters:
CONFIGURE CONTROLFILE AUTOBACKUP ON;
new RMAN configuration parameters are successfully stored
starting full resync of recovery catalog
full resync complete
old RMAN configuration parameters:
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE 'SBT_TAPE' TO 'bk_ctl_%d_%F';
new RMAN configuration parameters:
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE 'SBT_TAPE' TO 'bk_ctl_%d_%F';
new RMAN configuration parameters are successfully stored
starting full resync of recovery catalog
full resync complete
Starting backup at 04-SEP-12 09:21:51
channel t1: starting full datafile backupset
channel t1: specifying datafile(s) in backupset
input datafile fno=00004 name=/u03/oradata/TEST_T/datap_index01.dbf
input datafile fno=00003 name=/u03/oradata/TEST_T/datap_data01.dbf
channel t1: starting piece 1 at 04-SEP-12 09:21:52
released channel: t1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on t1 channel at 09/04/2012 09:37:07
ORA-19506: failed to create sequential file, name="TEST_T_FULL_OFFLINE_set2057_piece1_20120904_09nkbf1g_1_1", parms=""
ORA-27028: skgfqcre: sbtbackup returned error
ORA-19511: Error received from media manager layer, error text:
VxBSAValidateFeatureId: Failed with error:
Server Status: cannot connect on socket
RMAN> -
Xcode ERROR: Failed to create an alert for ID "enabled" based on defaults: 1
I installed OX 10.8 and xcode 4.4 and when I run any simple application for simulator it generated error in console:
Xcode[7808]: ERROR: Failed to create an alert for ID "enabled" based on defaults: 1
I reinstalled with clean xcode, but it did not help. I see the building freeze when "coping 2 of 2 resources to product
Also, xcode freezes when I jusy click on Mainstoryboard.storyboard file.
I found a few posts with the same ERROR but no clear fix. Any help will be appriciated.Hi, i had the same problem yesterday and after searching I found no solution to this error.
Today i just burned the original Mountain Lion.dmg to a portable hard driver then reinstall the OS. And it seemed that the os had been restored and the error had been fixed.
And, i guess there's some app that changes some documents of the system. So when you rewrite the os, u get the bug fixed.
Good luck to you guys. -
ORA-20001: Unable to create query and update page.
I am using the wizard: Form on a table with report 2 pages. I do not change any of the values when using the wizard (just taking all default values)
I created over 10 pages successfully already.
When creating the one page, I received this error on clicking the 'Finish' button
Error creating query and update.
Return to Application
ORA-20001: Unable to create query and update page. ORA-12899: value too large for column "FLOWS_010500"."WWV_FLOW_PAGE_PLUGS"."PLUG_QUERY_COL_ALLIGNMENTS" (actual: 269, maximum: 255)
Seems like it might be table related since I can continue and create more forms/reports on other tables.
Any help would be appreciated.336554,
Looks like there is a 127-column limit on the number of report columns supported when using that wizard. Do you have more than that?
57434 -
RMAN backup results in ORA-19504: failed to create file
Hi there,
We are receiving following error when we issue archivelog backup command.
input archive log thread=2 sequence=63449 recid=112736 stamp=685370768
input archive log thread=2 sequence=63450 recid=112738 stamp=685373560
input archive log thread=2 sequence=63451 recid=112739 stamp=685374337
input archive log thread=2 sequence=63452 recid=112741 stamp=685376999
input archive log thread=2 sequence=63453 recid=112744 stamp=685377082
channel ORA_DISK_5: starting piece 1 at 29-APR-09
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 04/29/2009 10:09:17
ORA-19504: failed to create file "/rmanback/arch_27628.arc"
ORA-27040: skgfrcre: create error, unable to create file
SVR4 Error: 2: No such file or directory
Any solutions, Please.
Thanks,
Balu.the mount point /rmanback has full write/read permission.
root@cmwdb2 # pwd
/rmanback
root@cmwdb2 # ls -lrt |pg
total 421996016
-rwxrwxrwx 1 oracle dba 604926976 Apr 25 07:57 arch_27391.arc
-rwxrwxrwx 1 oracle dba 675586048 Apr 25 07:57 arch_27392.arc
-rwxrwxrwx 1 oracle dba 710009856 Apr 25 07:57 arch_27390.arc
-rwxrwxrwx 1 oracle dba 733988864 Apr 25 07:57 arch_27388.arc
-rwxrwxrwx 1 oracle dba 741121024 Apr 25 07:57 arch_27389.arc
-rwxrwxrwx 1 oracle dba 44449792 Apr 25 07:58 _c-1556269231-20090425-03.arc -
Creating streams and sensor data hub
Hi all,
I am working on the Getting Started example from OTN ( "HandsOnSession.pdf" )
and in the step to create stream and sensor data hub, am having a problem.
I am working with the Standalone SES v10.1.2 running on a Linux OS.
While running this command at the Linux Terminal,
sqlplus system/welcome1@orcl
I get a -bash: sqlplus command not found error
I am in the <filepath>/edge/sql $ when I execute it.But I observed that my Oracle edge server install folder doesnot have a sqlplus folder which I think is by default installed in the Oracle_Home folder. There is a sqlj folder though , but am not familiar much with sqlj.
Could anyone advise on how to connect to the database and create he SDH tables.
Also in the sqlplus system/welcome1@orcl command, could anyone confirm if the syntax is as below,
sqlplus <username>/<password>@orcl
where
<username> = username used to install the Edge server install
<password> = password used to install the Edge server install
would appreciate your response,
Thanks,
VijayHi Vijay!
The EdgeServer doesn't have a full Oracle installation. Therefore a client tool such as sqlplus is not present. Install a Oracle Database on this machine (as I suspect you do not have a database yet) and use the sqlplus it comes with.
cu
Andreas -
ORA-39097: Data Pump job encountered unexpected error -39076
Hi Everyone,
Today i tried to take a export dump pump(table specific) from my test database, version is 10.2.0.4 on Solaris10(64-bit) and i got the following error message,
Job "SYSTEM"."SYS_EXPORT_TABLE_23" successfully completed at 09:51:36
ORA-39097: Data Pump job encountered unexpected error -39076
ORA-39065: unexpected master process exception in KUPV$FT_INT.DELETE_JOB
ORA-39076: cannot delete job SYS_EXPORT_TABLE_23 for user SYSTEM
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.KUPV$FT_INT", line 934
ORA-31632: master table "SYSTEM.SYS_EXPORT_TABLE_23" not found, invalid, or inaccessible
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.KUPV$FT_INT", line 1079
ORA-20000: Unable to send e-mail message from pl/sql because of:
ORA-29260: network error: Connect failed because target host or object does not exist
ORA-39097: Data Pump job encountered unexpected error -39076
ORA-39065: unexpected master process exception in MAIN
ORA-39076: cannot delete job SYS_EXPORT_TABLE_23 for user SYSTEM
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.KUPV$FT_INT", line 934
ORA-31632: master table "SYSTEM.SYS_EXPORT_TABLE_23" not found, invalid, or inaccessible
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.KUPV$FT_INT", line 1079
ORA-20000: Unable to send e-mail message from pl/sql because of:
ORA-29260: network error: Connect failed because target host or object does not exist
i hope the export dumpfile is valid one but i don't know why i am getting this error message. Does any one have faced this kind of problem. please advice me
Thanks
ShanOnce you see this:
Job "SYSTEM"."SYS_EXPORT_TABLE_23" successfully completed at 09:51:36The Data Pump job is done with the dumpfile. There is some clean up that is needed and it looks like something in the cleanup failed. Not sure what it was, but you dumpfile should be fine. One easy way to test it is to run impdp with sqlfile. This will do everything import will do, but instead of creating objects, it writes the ddl to the sql file.
impdp user/password sqlfile=my_test.sql directory=your_dir dupmfile=your_dump.dmp ...
If that works, then your dumpfile should be fine. The last thing the export does is write the Data Pump master table to the dumpfile. The first thing that import does is read that table in. So, if you can read it in (which impdp sqlfile does) your dump is good.
Dean -
ORA-39097: Data Pump job encountered unexpected error -12801
Hallo!I am running Oracle RAC 11.2.0.3.0 database on IBM-AIX 7.1 OS platform.
We normally do data pump expdp backups and we created a OS authenticated user and been having non-DBA users use this user (instead of / as sysdba which is only used by DBAs) to run expdp.This OS authenticated user has been working fine until it statrd gigin use error below
Export: Release 11.2.0.3.0 - Production on Fri Apr 5 23:08:22 2013
Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, Real Application Clusters, Automatic Storage Management, Oracle Label Security,
OLAP, Data Mining, Oracle Database Vault and Real Application Testing optio
FLASHBACK automatically enabled to preserve database integrity.
Starting "OPS$COPBKPMG"."SYS_EXPORT_SCHEMA_16": /******** DIRECTORY=COPKBFUB_DIR dumpfile=COPKBFUB_Patch35_PreEOD_2013-04-05-23-08_%U.dmp logfile=COPKBFUB_Patch35_PreEOD_2013-04-05-23-08.log cluster=n parallel=4 schemas=BANKFUSION,CBS,UBINTERFACE,WASADMIN,CBSAUDIT,ACCTOPIC,BFBANKFUSION,PARTY,BFPARTY,WSREGISTRY,COPK
Estimate in progress using BLOCKS method...
Processing object type SCHEMA_EXPORT/TABLE/TABLE_DATA
Total estimation using BLOCKS method: 130.5 GB
Processing object type SCHEMA_EXPORT/USER
Processing object type SCHEMA_EXPORT/SYSTEM_GRANT
Processing object type SCHEMA_EXPORT/ROLE_GRANT
Processing object type SCHEMA_EXPORT/DEFAULT_ROLE
Processing object type SCHEMA_EXPORT/PRE_SCHEMA/PROCACT_SCHEMA
Processing object type SCHEMA_EXPORT/SYNONYM/SYNONYM
Processing object type SCHEMA_EXPORT/DB_LINK
Processing object type SCHEMA_EXPORT/SEQUENCE/SEQUENCE
Processing object type SCHEMA_EXPORT/TABLE/TABLE
Processing object type SCHEMA_EXPORT/TABLE/GRANT/OWNER_GRANT/OBJECT_GRANT
Processing object type SCHEMA_EXPORT/TABLE/COMMENT
Processing object type SCHEMA_EXPORT/PACKAGE/PACKAGE_SPEC
Processing object type SCHEMA_EXPORT/PACKAGE/GRANT/OWNER_GRANT/OBJECT_GRANT
Processing object type SCHEMA_EXPORT/FUNCTION/FUNCTION
Processing object type SCHEMA_EXPORT/FUNCTION/GRANT/OWNER_GRANT/OBJECT_GRANT
Processing object type SCHEMA_EXPORT/PROCEDURE/PROCEDURE
Processing object type SCHEMA_EXPORT/PROCEDURE/GRANT/OWNER_GRANT/OBJECT_GRANT
Processing object type SCHEMA_EXPORT/PACKAGE/COMPILE_PACKAGE/PACKAGE_SPEC/ALTER_PACKAGE_SPEC
Processing object type SCHEMA_EXPORT/FUNCTION/ALTER_FUNCTION
Processing object type SCHEMA_EXPORT/PROCEDURE/ALTER_PROCEDURE
Processing object type SCHEMA_EXPORT/TABLE/INDEX/INDEX
Processing object type SCHEMA_EXPORT/TABLE/INDEX/FUNCTIONAL_INDEX/INDEX
Processing object type SCHEMA_EXPORT/TABLE/CONSTRAINT/CONSTRAINT
Processing object type SCHEMA_EXPORT/TABLE/INDEX/STATISTICS/INDEX_STATISTICS
Processing object type SCHEMA_EXPORT/TABLE/INDEX/STATISTICS/FUNCTIONAL_INDEX/INDEX_STATISTICS
Processing object type SCHEMA_EXPORT/VIEW/VIEW
Processing object type SCHEMA_EXPORT/VIEW/GRANT/OWNER_GRANT/OBJECT_GRANT
Processing object type SCHEMA_EXPORT/VIEW/GRANT/CROSS_SCHEMA/OBJECT_GRANT
Processing object type SCHEMA_EXPORT/VIEW/COMMENT
Processing object type SCHEMA_EXPORT/PACKAGE/PACKAGE_BODY
Processing object type SCHEMA_EXPORT/TABLE/STATISTICS/TABLE_STATISTICS
Processing object type SCHEMA_EXPORT/MATERIALIZED_VIEW
Processing object type SCHEMA_EXPORT/POST_SCHEMA/PROCACT_SCHEMA
. . exported "WASADMIN"."BATCHGATEWAYLOGDETAIL" 2.244 GB 9379850 rows
. . exported "WASADMIN"."UBTB_TRANSACTION" 13.71 GB 46299982 rows
. . exported "WASADMIN"."INTERESTHISTORY" 2.094 GB 13479801 rows
. . exported "WASADMIN"."MOVEMENTSHISTORY" 1.627 GB 13003451 rows
. . exported "WASADMIN"."ACCRUALSREPORT" 1.455 GB 18765315 rows
ORA-39097: Data Pump job encountered unexpected error -12801
ORA-39065: unexpected master process exception in MAIN
ORA-12801: error signaled in parallel query server PZ99, instance copubdb02dc:COPKBFUB2 (2)
ORA-01460: unimplemented or unreasonable conversion requested
Job "OPS$COPBKPMG"."SYS_EXPORT_SCHEMA_16" stopped due to fatal error at 23:13:37
Please assist.have you seen this?
*Bug 13099577 - ORA-1460 with parallel query [ID 13099577.8]* -
Hi to all,
OS: Windows Server 2003 EE 64bit, Database: Oracle Database 10g
I do not know whether this question is for here, but …
I have a database server with four SCSI hard drives. The last hard drive I added (300GB) in Disk Management is set up as Layout:Simple Type:Dynamic. All of my other drives are set up as Layout:Partition Type:Basic. The new drive I want to use as location for DATA PUMP dump files.
This new drive I don’t plan to put with another disk in mirror or any RAID configuration, as is the case with other existing hard drives.
Whether to leave it as Dynamic or to put them as Basic?
I was curious as to what the differences are, and if I continue to use it as Dynamic will I have any issue?
Thanks.you can copy the old backups to the new drive but don't do it using finder. clone the old TM drive to the new one using either Superduper or the restore tab in Disk Utility.
-
Failed to create vuser and Failed to create an instance of script
Hi
I have a parent script of type web service which would call 5 child scripts . 3 child scripts are webservice and 2 child scripts are of web test.
However when the function call goes to the child script (web test), the following exception is being thrown.
Any idea of how to get rid of this?
error creating vuser for child script
oracle.oats.scripting.modules.basic.api.exceptions.ScriptCreationException: Failed to create instance of script "TestUSNACHABankFormat".
at oracle.oats.scripting.modules.basic.api.exceptions.ScriptCreationException.createFailedToCreateScriptInstance(ScriptCreationException.java:75)
at oracle.oats.scripting.modules.basic.api.IteratingVUser.createScript(IteratingVUser.java:281)
at oracle.oats.scripting.modules.basic.api.internal.IteratingAgent.createIteratingVUser(IteratingAgent.java:602)
at oracle.oats.scripting.modules.basic.api.IteratingVUser.createCallableScript(IteratingVUser.java:1146)
at oracle.oats.scripting.modules.basic.api.IteratingVUser.getSpecialVariableImpl(IteratingVUser.java:1071)
at oracle.oats.scripting.modules.basic.api.IteratingVUser.getSpecialVariable(IteratingVUser.java:994)
at oracle.oats.scripting.modules.basic.api.IteratingVUser.getScriptAsset(IteratingVUser.java:1163)
at oracle.oats.scripting.modules.basic.api.IteratingVUserScript.getScript(IteratingVUserScript.java:431)
at script.run(script.java:34)
at oracle.oats.scripting.modules.basic.api.IteratingVUser.run(IteratingVUser.java:320)
at oracle.oats.scripting.modules.basic.api.IteratingVUser.insertScriptRun(IteratingVUser.java:340)
at oracle.oats.scripting.modules.basic.api.internal.CallableScript.run(CallableScript.java:182)
at script.run(script.java:61)
at oracle.oats.scripting.modules.basic.api.IteratingVUser.run(IteratingVUser.java:320)
at oracle.oats.scripting.modules.basic.api.internal.IteratingAgent.run(IteratingAgent.java:726)
at java.lang.Thread.run(Thread.java:619)
Caused by: java.lang.NullPointerException
at oracle.oats.scripting.modules.basic.api.IteratingVUserScript.getVariables(IteratingVUserScript.java:482)
at script.<init>(script.java:25)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at java.lang.Class.newInstance0(Class.java:355)
at java.lang.Class.newInstance(Class.java:308)
at oracle.oats.scripting.modules.basic.api.IteratingVUser.createScript(IteratingVUser.java:279)
... 14 moreHello
I would go around that problem :
at oracle.oats.scripting.modules.basic.api.IteratingVUserScript.getVariables(IteratingVUserScript.java:482)
Indicating something wrong with a GetVariables() function.
Any specific java code in your script?
Not much ideas though...
JB -
Creating stored outlines for date datatype bind variable
While trying to create stored lines for a query having date datatype I get
ORA-00932: inconsistent datatypes: expected DATE got NUMBER error:
desc table_t1;
col1 number,
datecol date
CREATE OR REPLACE OUTLINE TEST FOR CATEGORY TEST
ON
select * from table_t1
WHERE T1.COL1 IS NOT NULL
AND T1.DATECOL BETWEEN TRUNC (:D1)
AND TRUNC (:D2)
+ 1Can someone please help me what am I doing wrong?
I also tried to declare variable of date from sqlplus but it seems sqlplus doesn't have any support for date datatype var declaration as bind variable.
Thanks
Kev
Edited by: Kevin_K on Jan 3, 2011 4:48 AMI think in this case you would have to take an approach like this:
alter session set set create_stored_outlines=true;
run your sql-statement (with a date bind variable), using anonymous plsql block.
alter session set create_stored_outlines=false;
Not sure though. It's been a while since I played around with outlines. -
How to create a LOV for a ESS Job Parameter
Hi,
I have an ESS job and for one of the parameter , I want to provide users to select from the static List of values.
What is the easiest possible approach and how to achieve that.
Thanks in Advance,
AnkitSorry I missed it somehow. So, assuming currently the job parameter is a text box. Here, is what you can do.
1. Create a new Fusion application with a model project in it. Then Create a new view object with data based on static values type in the JDeveloper.
2. Create a new Fusion Applications Customization Application based on the exploded EAR
3. Open the page you want to change by customize option and then keep a note of the current binding value from the ess parameter inputText and then delete this field from UI.
4. Shuttle the newly created vo in the AM used for this page. For this to be available you will need to add your project created in step 1 as a library to the Customization application.
5. Now expand the data controls and drop the attribute from the VO as a LOV on your page and copy the value binding from the deleted field to this one.
Please note that the above approach should work but I have not personally tried or tested it. Also you will need to go through the extensibility guide for setting up your environment, to understand the customization process, and deploying it to test. Extensibility guide can be found [http://docs.oracle.com/cd/E15586_01/fusionapps.1111/e16691/toc.htm]
Thanks & Regards !
Vik
Fusion Apps Developer Relations
http://blogs.oracle.com/fadevrel
Please mark the response helpful or answered appropriately -
Problem with Create PDF and linked data
Using Acrobat X standard.
I have a Word 2010 doc with links to Visio and Excel data.
When using the CreatePDF option from Word, I consistently get a prompt asking whether I want to update the linked data before creating pdf. I would like to either (1) turn this prompt off or (2) -- less preferable -- have the linked data always update without prompting.
Is thre a setting that would accomplish one of these two solutions?
Thanks,
Craig
PS. All settings in Word have been set such that data IS NOT updated when printing on a regular printer.You can print to Adobe PDF.
Maybe you are looking for
-
Can we run a query with variable screen at start up in Bex Analyzer
Hello all, I have a query which asks for fiscal year and posting period at the start of query run. But when I run the query in analyzer, it gives me this error all the time. "Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION System error in
-
Hi Gurus, I am not an expert in the OBIEE 11g security area, we have an urgent requirement where in i need to obtain the complete list of all users along with their roles/responsibilities.Ours is a big organization and there are nearly 8000 users. Pl
-
There is a wrong in Oracle Application Express Advanced Tutorials
In the charpter 6 of Oracle Application Express Advanced Tutorials Release 3.2, I tried the " create multi value check boxed to filter content" (6-8 page) exercise, but I couldn't find the search field (P1_REPORT_SEARCH) under the page definition ite
-
hey everyone, this is pretty much my first time using ActionScript and I am having a couple of problems that im hoping someone could help me with. Im trying to make a file that will basically countdown from 4 minutes to zero displaying minutes, secon
-
I upgraded to Yosemite now my office for mac 2011 will not work
HELP!!!! Everything was fine until I upgraded. I really need my office products and I realy dont feel like buying a new laptop (although, I guess I *could* use one ) My specs: Late 2010 MacBook Air (13") - 2.13 GHz Intel Core 2 Duo Here is the erro