Ora8iR2 DB migration failed

Hi,
I tried to migrate an Oracle 8.0.5.1 db to
8iR2 using the migration utility. On startup
the database crashed with an internal error
(0600). startup nomount worked fine.
I guess it was the first startup before the
migration happened, because I could restart
it with the 8.0.5 Software.
Looks like the checkpoint process crashed.
I can provide Oracle with the trace files
if it helps.
Anyone tried to migrate a database ?
Sofar i stick with exp/imp (like in the old days).
tx
Kai
null

Hi,
I have the same problem like you.
The support tells me there is a bug
in ODMA (Bug:1325512).
Wait and see or use exp/imp.
Regards
Raf
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by poitsch:
Hi,
I tried to migrate an Oracle 8.0.5.1 db to
8iR2 using the migration utility. On startup
the database crashed with an internal error
(0600). startup nomount worked fine.
I guess it was the first startup before the
migration happened, because I could restart
it with the 8.0.5 Software.
Looks like the checkpoint process crashed.
I can provide Oracle with the trace files
if it helps.
Anyone tried to migrate a database ?
Sofar i stick with exp/imp (like in the old days).
tx
Kai<HR></BLOCKQUOTE>
null

Similar Messages

Server 2012 r2 live migration fails with hardware error

Hello all, we just upgraded one of our hyper v hosts from server 2012 to server 2012 r2; previously we had live replication setup between it and another box on the network which was also running server 2012. After installing server 2012 r2 when a live migration
is attempted we get the message:
"The virtual machine cannot be moved to the destination computer. The hardware on the destination computer is not compatible with the hardware requirements of this virtual machine. Virtual machine migration failed at migration source."
The servers in question are both dell, currently we have a poweredge r910 running server 2012 and a poweredge r900 running server 2012 r2. The section under processor for "migrate to a physical computer using a different processor" is already checked
and this same vm was successfully being live replicated before the upgrade to server 2012 r2. What would have changed around hardware requirements?
We are migrating from server 2012 on the poweredge r910 to server 2012 r2 on the poweredge r900. Also When I say this was an upgrade, we did a full re install and wiped out the installation of server 2012 and installed server 2012 r2, this was not an upgrade
installation.

The only cause I’ve seen so far is virtual switches being named differently. I do remember that one of our VMs didn’t move, but we simply bypassed this problem, using one-time backup (VeeamZIP, more specifically).
If it’s one-time operation you can use the same procedure for the VMs in question -> backup and restore them at new server.
Kind regards, Leonardo.

Live Migration failed using virtual HBA's and Guest Clustering

Hi,
We have a Guest Cluster Configuration on top of an Hyper-V Cluster. We are using Windows 2012 and Fiber Channel shared storage.
The problem is regarding Live Migration. Some times when we move a virtual machine from node A to node B everything goes well but when we try to move back to node A Live Migration fails. What we can see is that when we move the VM from node A to B and Live
Migration completes successfully the virtual ports remain active on node A, so when we try to move back from B to A Live Migration fails because the virtual ports are already there.
This doesn't happen every time.
We have checked the zoning between Host Cluster Hyper-V and the SAN, the mapping between physical HBA's and the vSAN's on the Hyper-V and everything is ok.
Our doubt is, what is the best practice for zoning the vHBA on the VM's and our Fabric? We setup our zoning using an alias for the vHBA 1 and the two WWN (A and B) on the same object and an alias for the vHBA 2 and the correspondent WWN (A and B). Is it
better to create an alias for vHBA 1 -> A (with WWN A) and other alias for vHBA 1 -> B (with WWN B)?
The guest cluster VM's have 98GB of RAM each. Could it be a time out issue when Live Migration happen's and the virtual ports remain active on the source node? When everything goes well, the VM moves from node A with vHBA WWN A to node B and stays there
with vHBA WWN B. On the source node the virtual ports should be removed automatically when the Live Migration completes. And that is the issue... sometimes the virtual ports (WWN A) stay active on the source node and when we try to move back the VM Live Migration
fails.
I hope You may understand the issue.
Regards,
Carlos Monteiro.

Hi ,
Hope the following link may help.
To support live migration of virtual machines across Hyper-V hosts while maintaining Fibre Channel connectivity, two WWNs are configured for each virtual Fibre Channel adapter: Set A and Set B. Hyper-V automatically alternates between the Set A and Set B
WWN addresses during a live migration. This ensures that all LUNs are available on the destination host before the migration and that no downtime occurs during the migration.
Hyper-V Virtual Fibre Channel Overview
http://technet.microsoft.com/en-us/library/hh831413.aspx
More information:
Hyper-V Virtual Fibre Channel Troubleshooting Guide
http://social.technet.microsoft.com/wiki/contents/articles/18698.hyper-v-virtual-fibre-channel-troubleshooting-guide.aspx
Hyper-V Virtual Fibre Channel Design Guide
http://blogs.technet.com/b/privatecloud/archive/2013/07/23/hyper-v-virtual-fibre-channel-design-guide.aspx
Hyper-V virtual SAN
http://salworx.blogspot.co.uk/
Thanks.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Collection Migration fails

We are trying SCCM migration from CM7 to CM2012 first on a test environment before moving to production. Many collection migrations fail with
Entity ABCD with path SMS_Collection.xxxxxxxxxxxx failed with Invalid Query for collection rule Query
I can see some Attribute classes have not been migrated , that is why the collection can't migrate with those queries and it fails. How to correct it ? The closest to this problem/solution was in an earlier thread here "Migrating Collections
fails" . WE have the AD Forest Discovery turned on and the SCCM servers have been discovered. So, the solution in that thread has not worked. Any ideas ?
cheers
Vij

Thanks for the reply Peter.
The colelction won't be migrated at al if it is a mixed one; so I am not bothered about it.
Yes, we have extended hardware inventory in CM2007. I thought it is automatically migrated during SCCM Migration tool.
I can see some Attributes on which the queries are based is not migrated, that is why the collection migration fails. So, how do we create extended hardware inventory in SCCM 2012, the best solution would be to migrate that also from CM 2007. Someone was
saying , create a client first, then inventorying that would pull in extra hardware attribute classes. I don't know if it would work or not; but that would defeat the purpose of during migrations first before going for clients.

Error Message "Persistent store Migration Failed"

Dear Users:
I have a Curve 8330. When attempting to back up my Blackberry, I get the
message ³Persistent store migration failed, missing source managed object
model.² What does this mean and why can¹t I backup my Blackberry to the
MacBook address book?
Thanks,
Glen

I can help you to solve your problem, just follow the next steps: 1.- Get the unit into the “Support Menu” by following the steps below:A.- Press and hold the “*” and “#” keys at the same time then release both keys.Display should say “Enter Special Key Combo”B.- Press and release in sequence the “1”, “2” and “3” buttons. Once in the menu, follow the next steps:2.- Press and release the right arrow button twice.3.- Display should say “System Configuration Menu”.4.- Press and release the “OK” button.
5.-Display should say “Hardware failure status”. If not there already, press Arrow Key over to “Hardware failure status”,
6.-Press and release the “OK” button.
7.-Display should say “Hardware failure status: Clear. Press OK to clear”.
8.-Press and release the “OK” Button. The message changes to “Hardware failure status Cleared. Press Cancel to continue”.
9.-Press and release the “CANCEL” button as many times until the “Welcome to Photosmart Express” window appears.
10.-Turn the unit on and then off, continue with the installation/setup of the unit. If this error continues then the unit may have any other problem. Let me know if this solved your problem.

Persistent store migration failed, missing source managed object model.

I downloaded the new Desktop Manager and all seemed to go well (I did a backup), until I tried to sync the address book with my new 8120. I then got an error message 'Persistent store migration failed, missing source managed object model', followed by a failed to sync message. Having had my calendar corrupted by the leaked version I didn't want to risk that.
I don't want to be too negative, but after many years of being a Palm user my Blackberry experience so far has been a nightmare.
Anybody else having problems?
Solved!
Go to Solution.

You had the leaked version installed? Did you still have it installed when you installed the official version? If you removed it, what steps did you take to remove it?
I would like to get some more details:
Mac OS version:
Device software version:
Device model:
Carrier:
Are you using BIS, BES or both?
The only stupid question is the one you don't ask before you reboot the BES.

If migrations fails, how to restore data

Hello,
if migration fails at image applying step, we can use another TS to install OS only and loadstate.exe to restore data from SMP, I tried it and it works. But if we use hardlinks, after fail I need to run TS to build OS only and it overwrites folder C:\_SMSTaskSequence\
where UserState folder is stored, and I am not able to restore data. What I can do in this situation?

Hi,
First I recommend you check the log file SMSTS.LOG.
Also as Peter mentioned, you could use loadstate via the command line to restore the data.
For more infomation, please review the links below:
LoadState Syntax
http://technet.microsoft.com/en-us/library/dd560804(v=ws.10).aspx
Hard-Link Migration Store
http://technet.microsoft.com/en-us/library/dd560753(v=WS.10).aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Migration/Live Migration fails with shared storage (SMB), but not all the time

I have 2 Hyper-V Hosts using shared storage via SMB. I'm having intermittent issues with migrations failing. It'll either go through the motions of doing the whole move and fail and/or when I try to start it again I get the following:
I've done a lot of reading on this and have done various things that have been recommended. For each Hyper-V host I've setup delagation via Kerberos. ie. HV_Host1 has CIFS - HV_Host2; CIFS - SMB Server; MS Virtual System Migration Service - HV_Host2 and
vice versa.
On the actual SMB share on the Shared Storage server I added permissions to the folder for HV_Host1, HV_Host2, Storage Server, Domain Admins and my user account for full access.
In Group Policy, I've blocked Inheritance for the OU containing the Hyper-V hosts, though I have added some of the Group Policy's manually that I needed.
Last thing, I also added Domain Admins to the Local GP on each Host for "Log on as a Service" and "Impersonate a client after authentication" as shown in this thread: http://social.technet.microsoft.com/forums/windowsserver/en-US/7e6b9b1b-e5b1-4e9e-a1f3-2ce72ea1e543/unable-to-migrate-create-vm-hyperv-cluster-2012-logon-failure-have-to-restart-the-hyperv
I get these failed migrations regardless if I start them on the actual Host or via the admin console from Win8.
At this point I'm not sure what else to check or the next step to take for this.

Hi Granite,
Please refer to following article to build hyper-v over SMB :
http://technet.microsoft.com/en-us/library/jj134187.aspx#BKMK_Step3
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Client PC migration fails from SBS 2003 to SBS 2012 Essentials

Please check out this entire message before making an assumption about what it says, thanks.
Our old SBS 2003 Server hard failed a few weeks ago.
Rather than repair it, we ordered a new server with SBS 2012 Essentials and loaded the backup data from the old server.
The Server is just fine. We are having no issues whatsoever with the server. I kept the old domain name and server name.
The Client Computers, some Win7 some Win8.1, have turned into a nightmare to re-connect.
What happens is, the user can log in, but has no files in desktop, downloads or documents, nothing has been migrated:
The process I'm using is this:
1> I take them off the old domain and set them up as workgroup: NOGROUP... that works fine.
2> I bring up http://SERVERNAME/connect and begin installing the server software, no problem yet...
        >> This goes to a point where it asks for a restart, followed by a lot more waiting.
        >> Eventually it crashes with a message I have, unfortunately, not documented (sorry).
3> When I restart the PC, I'm able to log into the user account : DOM\username, but none of the users files are there.
Looking at the file tree at C:\Users I see a folder structure like this:
C:\Users
        |_ _client.setup_ (essentially empty)
        |_ username         (the old account... and yes, it has all of the files and app data)
        |_ username.DOM (the new account, but essentially empty)
It appears that the setup was supposed to migrate 'username' thru '_client.setup_ into 'username.DOM' but failed.
I can move all of the data from 'username' to 'username.DOM' to solve the data and files problem.
But the AppData folder cannot be moved in its entirety (I tried, and it clobbers the user completely), I have to manually transfer files from 'username\AppData' folders (Local, LocalLow and Roaming) making sure to transfer only the files that don't exist
in the 'username.DOM\Appdata' folders.
I realize that this process leaves me with a 'Less Than Perfect' AppData setup.
Since I have many Clients left to convert, I'd like to know if I'm doing something wrong, or how to make it right.

With a new server with a new domain you have started down the right path. Disjoin and the http:// technique should have worked, but we can address that when you can give us more info.
When joining a new domain the old users profiles get blocked by security to the new users. But the local admin or the domain admin should have access. The way I do it is to copy out the required data from the old profile to a safe place then
copy it back to the new profile when finished. But there are profile migration wizards, one of them at
www.forensit.com, that work very well.
As for the system crash when you did the join... please see if you can get the message, and then examine the logs in both the server and the client.   For the server, look here:
http://blogs.technet.com/b/sbs/archive/2014/09/30/windows-server-essentials-log-files.aspx
For the client, scroll down in the link above to the section about client side logs.
Larry Struckmeyer[MVP] If your question is answered please mark the response as the answer so that others can benefit.

What to do when SLS - Lion Server Upgrade & Migration Fail

Hi everyone,
I've had a tough time over the past week trying to updating my SLS to LS. (It was a slow week at the office so despite the warnings in these discussions I wasn't disturbing anyone, so I thought I'd try...) Both an upgrade to the current running system and a clean install on a wipe of that hard drive stall at the "Configuring Services" "Upgrading services" screen of the set up process. The migration path eventually fails, and as far as I can tell, it seems that the upgrade path just stays there forever.
Don't worry - I'm doing this all on a Super Duper! clone of my primary drive, so I can go back to SLS whenever I need to.
BUT, I can tell that the server's status is at least partially okay, even in this stalled setup state - iChat seems to work on various clients, and I can use Server Admin to see stats and services, etc.
So despite the discomfort of a failed install, part of me feels like I'll be fine with the LS if I can just figure out how to move my old data into the right places for the new system to use it. But I can't find any guidance for that. I'm looking to migrate OD (seems to have migrated fine), iCal, iChat, Address Book, Wikis, Time Machine, and File Sharing (which should be trivial to set up, I reckon).
Can anyone point me in the right direction?
Thanks very much,
Willhaus

Okay, so I've had some marginal success.
After leaving the hung install for a ridiculous amount of time (24+ hours), I realized that I could click the help button, and from the help window click the "further info about Lion Server" link to launch Safari. That gave me access to Software Update from the Apple menu, which then let me install the latest Safari update which conveniently enough requires a restart.
After restart, the Server Migration Assistant kicked in again, but failed quickly in the upgrading services stage. Another restart, and the sever finally booted more or less normally.
The strange thing was that although chat services worked fine during the hung install, all OD-related services stopped working after restarting. Turns out there were no users or groups in OD. Importing them from an OD archive, though, restored them.
So now iChat works great (even the old chat longs migrated successfully), and AFP is properly sharing our volumes across our studio's network. So our server is limping along.
The other services we need that aren't up yet are Wiki and iCal. Some info about those:
Wiki: administrators can log in and see all wikis just fine. That's awesome because it means the data migrated successfully. Any non-admin users can log in, but are then get a wiki-styled page that says simply "No wikis found". It's as if they don't have permissions to see the wikis, even though in Server.app they belong to the groups that the wikis are associated with. I've tried removing and re-adding users to groups, but that doesn't seem to do it. Any ideas how to fix this?
Calendar: While I can't get this to work, it's not like it's completely lifeless. An account in a client Lion iCal configured with the proper Lion settings returns an error that reads:
"The Server is Busy or Unavailable.
"The server at myserver.com is currently unable to handle the connection for account “ Calendars” due to a temporary overloading or maintenance of the server. If this continues you should contact the server administrator.
"You may try to connect to the server again or take the account offline."
As a logged in administrator, in a wiki clicking on Calendar in the nab bar goes to the calendar style page with an unending dialogue box that reads "Getting events from server". And clicking on Calendar from Home page footer takes me to the URL https://myserver.com/webcal with an error that says:
"Service Temporarily Unavailable
The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.
Apache/2.2.20 (Unix) mod_ssl/2.2.20 OpenSSL/0.9.8r DAV/2 Server at myserver.com Port 443"
Again, at least I'm confident that the data migrated properly - I can find all the calendar data in it's proper new location - but either the service won't start or something's not configured correctly. I've tried chaining the hostname and restarting the service about a billion times. I've got no idea what to try next. Any ideas?
Thank you so much,
Willhaus

Live Migration Fails with error Synthetic FiberChannel Port: Failed to finish reserving resources on an VM using Windows Server 2012 R2 Hyper-V

Hi, I'm currently experiencing a problem with some VMs in a Hyper-V 2012 R2 failover cluster using Fiber Channel adapters with Virtual SAN configured on the hyper-v hosts.
I have read several articles about this issues like this ones:
https://social.technet.microsoft.com/Forums/windowsserver/en-US/baca348d-fb57-4d8f-978b-f1e7282f89a1/synthetic-fibrechannel-port-failed-to-start-reserving-resources-with-error-insufficient-system?forum=winserverhyperv
http://social.technet.microsoft.com/wiki/contents/articles/18698.hyper-v-virtual-fibre-channel-troubleshooting-guide.aspx
But haven't been able to fix my issue.
The Virtual SAN is configured on every hyper-v host node in the cluster. And every VM has 2 fiber channel adapters configured.
All the World Wide Names are configured both on the FC Switch as well as the FC SAN.
All the drivers for the FC Adapter in the Hyper-V Hosts have been updated to their latest versions.
The strange thing is that the issue is not affecting all of the VMs, some of the VMs with FC adapters configured are live migrating just fine, others are getting this error.
Quick migration works without problems.
We even tried removing and creating new FC Adapters on a VM with problems, we had to configure the switch and SAN with the new WWN names and all, but ended up having the same problem.
At first we thought is was related to the hosts, but since some VMs do work live migrating with FC adapters we tried migrating them on every host, everything worked well.
My guess is that it has to be something related to the VMs itself but I haven't been able to figure out what is it.
Any ideas on how to solve this is deeply appreciated.
Thank you!
Eduardo Rojas

Hi Eduardo,
How are things going ?
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

10.3.9 - 10.4 Migration failed! Server lost! - How to set DHCP info?

Today we tried to migrate our Xserve from 10.3.9 to 10.4
We've chosen to start the update from a PowerBook and attached our Xserve in FireWire Target Mode.
Update/Install ran smoothly, BUT ON RESTART WE LOST CONTACT TO OUR XSERVE
In system.log it says
HeadlessStartup: Enabling root account so we can remotely administrate.
Apr 5 14:03:18 everlearn /System/Library/ServerSetup/serversetup: defaults info /usr/bin/defaults write -g AppleLanguages '(de, English, ja, fr)'
Apr 5 14:03:20 everlearn /System/Library/ServerSetup/serversetup: CFUserTextEncoding info 0:3
Apr 5 14:03:22 everlearn /System/Library/ServerSetup/serversetup: user library preferences ByHost folder is existed.
Apr 5 14:03:22 everlearn /System/Library/ServerSetup/serversetup: copyPath from rootByHost to userByHost failed.
Apr 5 14:03:22 everlearn /System/Library/ServerSetup/serversetup: create file userByHost is OK.
Apr 5 14:03:25 everlearn mDNSResponder: Service "everlearn.ssh.tcp.local." renamed to "wipaed-dev"
Apr 5 14:03:25 everlearn mDNSResponder: Service "everlearn.sftp-ssh.tcp.local." renamed to "wipaed-dev"
Apr 5 14:03:47 everlearn sudo: root : TTY=unknown ; PWD=/ ; USER=cyrusimap ; COMMAND=/usr/bin/cyrus/tools/mkimap
Apr 5 14:03:55 everlearn root: Setting SquirrelMail language to 'de_DE'
Apr 5 14:03:57 everlearn sudo: root : TTY=unknown ; PWD=/private/var/imap/db.backup2 ; USER=cyrusimap ; COMMAND=/usr/bin/touch /var/imap/db/skipstamp
Apr 5 14:03:57 everlearn sudo: root : TTY=unknown ; PWD=/private/var/imap/db.backup2 ; USER=cyrusimap ; COMMAND=/usr/bin/cyrus/bin/ctl_mboxlist.old -d
Apr 5 14:04:00 everlearn sudo: root : TTY=unknown ; PWD=/private/var/imap/db.backup2 ; USER=cyrusimap ; COMMAND=/bin/mv /var/imap/mailboxes.db /var/imap/mailboxes.db.old
Apr 5 14:04:00 everlearn sudo: root : TTY=unknown ; PWD=/private/var/imap/db ; USER=cyrusimap ; COMMAND=/usr/bin/touch /var/imap/db/skipstamp
Apr 5 14:04:01 everlearn sudo: root : TTY=unknown ; PWD=/private/var/imap/db ; USER=cyrusimap ; COMMAND=/usr/bin/cyrus/bin/ctl_mboxlist -u
Apr 5 14:04:01 everlearn ctl_mboxlist[942]: skiplist: recovered /var/imap/mailboxes.db (0 records, 144 bytes) in 0 seconds
Apr 5 14:04:05 everlearn /System/Library/ServerSetup/MigrationExtras/49_webconfigmigrator: Existing /private/etc/httpd/httpd_macosxserver.conf file couldn't be read! Nothing to migrate.
Apr 5 14:04:05 everlearn /System/Library/ServerSetup/MigrationExtras/50_ipfwconfigmigrator: No Jaguar firewall settings to migrate from NetInfo directory dsRecTypeNative:/config/IPFilters.
Apr 5 14:04:09 everlearn /System/Library/ServerSetup/MigrationExtras/60_ipfwconfigmigrator: ipfw config migration:Notice:Migrating old IP address group. New name:'Migrated: 10-net' New id:'Migrated: 10-net'
Apr 5 14:04:09 everlearn /System/Library/ServerSetup/MigrationExtras/60_ipfwconfigmigrator: ipfw config migration:Notice:IP address group 'any' has 'SSH - Secure Shell' enabled because 'ssh' was enabled in old rules
Apr 5 14:04:09 everlearn /System/Library/ServerSetup/MigrationExtras/60_ipfwconfigmigrator: ipfw config migration:Notice:IP address group 'any' has 'Server Admin SSL, also Web-ASIP' enabled because 'asip-webadmin' was enabled in old rules
Apr 5 14:04:09 everlearn /System/Library/ServerSetup/MigrationExtras/60_ipfwconfigmigrator: ipfw config migration:Notice:IP address group 'any' has 'Remote Directory Access' enabled because 'remoteda' was enabled in old rules
Apr 5 14:04:09 everlearn /System/Library/ServerSetup/MigrationExtras/60_ipfwconfigmigrator: ipfw config migration:Notice:IP address group 'any' has 'Server administration using Server Admin' enabled because 'serveradmin_pseudoservice' was enabled in old rules
Apr 5 14:04:09 everlearn /System/Library/ServerSetup/MigrationExtras/60_ipfwconfigmigrator: ipfw config migration:Notice:IP address group 'any' has 'ICMP - echo reply messages (replies to outgoing pings)' enabled because 'icmppingpseudoservice' was enabled in old rules
Apr 5 14:04:09 everlearn /System/Library/ServerSetup/MigrationExtras/60_ipfwconfigmigrator: ipfw config migration:Notice:IP address group 'any' has 'IGMP - Internet Group Management Protocol' enabled because 'igmp_pseudoservice' was enabled in old rules
Apr 5 14:04:09 everlearn /System/Library/ServerSetup/MigrationExtras/60_ipfwconfigmigrator: ipfw config migration:Notice:IP address group 'any' has 'RTSP - QTSS streaming' enabled because 'rtsp' was enabled in old rules
Apr 5 14:04:09 everlearn /System/Library/ServerSetup/MigrationExtras/60_ipfwconfigmigrator: ipfw config migration:Notice:IP address group 'any' has 'WebObjects' enabled because 'webobjects' was enabled in old rules
Apr 5 14:04:09 everlearn /System/Library/ServerSetup/MigrationExtras/60_ipfwconfigmigrator: ipfw config migration:Notice:IP address group 'any' has 'QTSS web administration' enabled because 'qtssweb_pseudoservice' was enabled in old rules
Apr 5 14:04:09 everlearn /System/Library/ServerSetup/MigrationExtras/60_ipfwconfigmigrator: ipfw config migration:Notice:IP address group 'any' has 'QTSS MP3 streaming' enabled because 'qtssmp3_pseudoservice' was enabled in old rules
Apr 5 14:04:09 everlearn /System/Library/ServerSetup/MigrationExtras/60_ipfwconfigmigrator: ipfw config migration:Notice:IP address group 'any' has 'HTTP - web service alternate (Apache 2 default)' enabled because 'http-alt' was enabled in old rules
Apr 5 14:04:09 everlearn /System/Library/ServerSetup/MigrationExtras/60_ipfwconfigmigrator: ipfw config migration:Notice:IP address group 'any' has 'HTTP - web service' enabled because 'http' was enabled in old rules
Apr 5 14:04:09 everlearn /System/Library/ServerSetup/MigrationExtras/60_ipfwconfigmigrator: ipfw config migration:Notice:Migration applying old customized enable status to rule '65000'
Apr 5 14:04:09 everlearn /System/Library/ServerSetup/MigrationExtras/60_ipfwconfigmigrator: ipfw config migration:Notice:Migration applying old customized enable status to rule '63300'
Apr 5 14:04:09 everlearn root: The previous /etc/httpd/workers.properties file has been saved as /etc/httpd/workers.properties.applesaved. The current /etc/httpd/workers.properties file now includes a blojsom worker.
Apr 5 14:04:31 everlearn servermgrd: cupsd mach_msg error (ipc/rcv) timed out
Since then we cannot find the Xserve via ping or even with a PowerBook in the same subnet.
How can we restore TCP/IP information, subnet info etc.
Right now we CANNOT ACCESS PER SSH but ONLY VIA FIREWIRE ACCESS, therefore we cannot use changeip and serversetup.
How can we set DHCP information without ssh access only access to the files?
What to set?`
Where to set?
Any information is greatly appreciated.
karsten

The main ethernet port had been disabled by the installer!
We connected a powerbook (just plain ethernet cable) to the other port which was running with some old ip number and send
ping 224.0.0.1
This gives you the ip number
then we logged in via ssh
then
networksetup -setnetworkserviceenabled "Ethernet…" on
Now we can work through the messed up install…

Server Calendar migration failed

Hi,
last week when installing the latest server update for Mavericks the Calendar and Contacts stopped working. I tried everything to get it working again for the past few days like reinstalling server and even updated to Yosemite and installed Server 4 with the hope it would migrate correctly but without any luck.
The calendar state keeps in Starting and will never change to Started.
Below you can find the migration.log:
calendarcommonextra: Jan 21 21:49:45 Clean install: False
calendarcommonextra: Jan 21 21:49:45 Legacy indicator file does not exist
calendarcommonextra: Jan 21 21:49:46 Default certificate is: /etc/certificates/MYSERVER.FC3592DE1A30B14C74BE9CAFCBACFCC57615842C.cert.pem
calendarcommonextra: Jan 21 21:49:46 Default cert path: /etc/certificates/MYSERVER.FC3592DE1A30B14C74BE9CAFCBACFCC57615842C.cert.pem
calendarcommonextra: Jan 21 21:49:46 Reading plist /Library/Server/Calendar and Contacts/Config/caldavd-system.plist
calendarcommonextra: Jan 21 21:49:46 EnableCalDAV=True
calendarcommonextra: Jan 21 21:49:46 EnableCardDAV=True
calendarcommonextra: Jan 21 21:49:46 Looking up DatabaseRoot
calendarcommonextra: Jan 21 21:49:51 Output from calendarserver_config: DatabaseRoot=/Library/Server/Calendar and Contacts/Data/Database.xpg
calendarcommonextra: Jan 21 21:49:51 Looking up Postgres.ClusterName
calendarcommonextra: Jan 21 21:49:52 Output from calendarserver_config: Postgres.ClusterName=cluster.pg
calendarcommonextra: Jan 21 21:49:52 Sending to serveradmin: calendar:command = exportPushCertificates
calendarcommonextra: Jan 21 21:49:55 Output from push certificate export: calendar:Exported = "Yes"
calendarcommonextra: Jan 21 21:49:55 Calling calendarserver_upgrade --postprocess
calendarcommonextra: Jan 21 21:50:01 Output from calendarserver_upgrade: 2015-01-21 21:49:59+0100 Root ACL: <?xml version='1.0' encoding='UTF-8'?>
<acl xmlns='DAV:'>
<ace>
    <principal>
      <authenticated/>
    </principal>
    <grant>
      <privilege>
        <read/>
      </privilege>
      <privilege>
        <read-current-user-privilege-set/>
      </privilege>
    </grant>
    <protected/>
</ace>
</acl>
2015-01-21 21:49:59+0100 Nav ACL: <?xml version='1.0' encoding='UTF-8'?>
<acl xmlns='DAV:'>
<ace>
    <principal>
      <authenticated/>
    </principal>
    <grant>
      <privilege>
        <read/>
      </privilege>
      <privilege>
        <read-current-user-privilege-set/>
      </privilege>
    </grant>
    <protected/>
</ace>
</acl>
2015-01-21 21:49:59+0100 CalDAV APNS certificate passphrase retreived from keychain
2015-01-21 21:49:59+0100 CardDAV APNS certificate passphrase retreived from keychain
2015-01-21 21:49:59+0100 iMIP Sending password successfully retreived from keychain
2015-01-21 21:49:59+0100 iMIP Receiving password successfully retreived from keychain
2015-01-21 21:49:59+0100 Root ACL: <?xml version='1.0' encoding='UTF-8'?>
<acl xmlns='DAV:'>
<ace>
    <principal>
      <authenticated/>
    </principal>
    <grant>
      <privilege>
        <read/>
      </privilege>
      <privilege>
        <read-current-user-privilege-set/>
      </privilege>
    </grant>
    <protected/>
</ace>
</acl>
2015-01-21 21:49:59+0100 Nav ACL: <?xml version='1.0' encoding='UTF-8'?>
<acl xmlns='DAV:'>
<ace>
    <principal>
      <authenticated/>
    </principal>
    <grant>
      <privilege>
        <read/>
      </privilege>
      <privilege>
        <read-current-user-privilege-set/>
      </privilege>
    </grant>
    <protected/>
</ace>
</acl>
2015-01-21 21:49:59+0100 iMIP Sending password successfully retreived from keychain
2015-01-21 21:49:59+0100 iMIP Receiving password successfully retreived from keychain
2015-01-21 21:49:59+0100 Root ACL: <?xml version='1.0' encoding='UTF-8'?>
<acl xmlns='DAV:'>
<ace>
    <principal>
      <authenticated/>
    </principal>
    <grant>
      <privilege>
        <read/>
      </privilege>
      <privilege>
        <read-current-user-privilege-set/>
      </privilege>
    </grant>
    <protected/>
</ace>
</acl>
2015-01-21 21:49:59+0100 Nav ACL: <?xml version='1.0' encoding='UTF-8'?>
<acl xmlns='DAV:'>
<ace>
    <principal>
      <authenticated/>
    </principal>
    <grant>
      <privilege>
        <read/>
      </privilege>
      <privilege>
        <read-current-user-privilege-set/>
      </privilege>
    </grant>
    <protected/>
</ace>
</acl>
2015-01-21 21:49:59+0100 iMIP Sending password successfully retreived from keychain
2015-01-21 21:49:59+0100 iMIP Receiving password successfully retreived from keychain
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twisted.application.app
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twisted.internet.protocol
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twisted.mail.smtp
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twisted.internet.base
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twisted.web.client
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twisted.persisted.sob
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twisted.names.client
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twisted.protocols.basic
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twisted.application.internet
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twisted.web.html
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twisted.protocols.amp
2015-01-21 21:49:59+0100 Replacing Twisted log.msg object twistedLogMessage in twext.python.log
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twisted.python.threadpool
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twisted.web._newclient
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twisted.cred.checkers
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twisted.persisted.styles
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twisted.internet.tcp
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twext.internet.adaptendpoint
2015-01-21 21:49:59+0100 Replacing Twisted log.err object err in txweb2.dav.xattrprops
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twisted.internet.udp
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twisted.mail.pop3client
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twisted.internet.task
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twisted.internet.endpoints
2015-01-21 21:49:59+0100 Replacing Twisted log.err object err in twisted.internet._baseprocess
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twisted.names.dns
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twext.internet.spawnsvc
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twext.enterprise.adbapi2
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twisted.web.http
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twisted.internet.selectreactor
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twisted.internet.posixbase
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twisted.protocols.policies
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twisted.plugin
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twisted.internet.defer
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twisted.internet._posixstdio
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twisted.web.template
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twisted.protocols.tls
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twisted.protocols.memcache
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twisted.enterprise.adbapi
2015-01-21 21:49:59+0100 Replacing Twisted log module object log in twisted.internet.process
2015-01-21 21:49:59+0100 Calendar and Contacts Server 6.0-unknown starting Utility process...
2015-01-21 21:49:59+0100 Creating /var/run/caldavd/PostgresSocket
2015-01-21 21:49:59+0100 Cluster already exists at /Library/Server/Calendar and Contacts/Data/Database.xpg/cluster.pg
2015-01-21 21:49:59+0100 Requesting postgres start via /Applications/Server.app/Contents/ServerRoot/usr/bin/xpg_ctl ["-c listen_addresses=''", '-k /var/run/caldavd/PostgresSocket', '-c shared_buffers=165', '-c max_connections=110', '-c standard_conforming_strings=on', '-c unix_socket_permissions=0770', '-c log_lock_waits=TRUE', '-c deadlock_timeout=10', "-c log_line_prefix='%m [%p] '", "-c log_directory='/Library/Server/Calendar and Contacts/Logs'", '-c log_truncate_on_rotation=on', '-c log_filename=postgresql_%w.log', '-c log_rotation_age=1440', '-c logging_collector=on']
2015-01-21 21:50:00+0100 received postgres stdout "2015-01-21 21:50:00 XPG.2178: Spawning... ('/usr/bin/tar', '-xz', '-f', '/Library/Server/Calendar and Contacts/Data/Database.xpg/backup/base_backup/base_complete.tar.gz', '-C', '/Library/Server/Calendar and Contacts/Data/Database.xpg/cluster.pg')\n"
2015-01-21 21:50:00+0100 received postgres stdout '2015-01-21 21:50:00 XPG.2178: Preparing to upgrade outdated database cluster.\n'
2015-01-21 21:50:00+0100 received postgres stderr Traceback (most recent call last):
File "/System/Library/Frameworks/Python.framework/Versions/2.7/Extras/lib/python/twi sted/internet/defer.py", line 423, in errback
2015-01-21 21:50:00+0100 received postgres stderr     self._startRunCallbacks(fail)
File "/System/Library/Frameworks/Python.framework/Versions/2.7/Extras/lib/python/twi sted/internet/defer.py", line 490, in _startRunCallbacks
    self._runCallbacks()
File "/System/Library/Frameworks/Python.framework/Versions/2.7/Extras/lib/python/twi sted/internet/defer.py", line 577, in _runCallbacks
2015-01-21 21:50:00+0100 received postgres stderr     current.result = callback(current.result, *args, **kw)
File "/System/Library/Frameworks/Python.framework/Versions/2.7/Extras/lib/python/twi sted/internet/defer.py", line 1155, in gotResult
    _inlineCallbacks(r, g, deferred)
--- <exception caught here> ---
File "/System/Library/Frameworks/Python.framework/Versions/2.7/Extras/lib/python/twi sted/internet/defer.py", line 1097, in _inlineCallbacks
    result = result.throwExceptionIntoGenerator(g)
File "/System/Library/Frameworks/Python.framework/Versions/2.7/Extras/lib/python/twi sted/python/failure.py", line 389, in throwExceptionIntoGenerator
2015-01-21 21:50:00+0100 received postgres stderr     return g.throw(self.type, self.value, self.tb)
File "/Applications/Server.app/Contents/ServerRoot/usr/bin/xpg_ctl", line 2038, in main
2015-01-21 21:50:00+0100 received postgres stderr     result = yield xpg.do_everything(argv, environ)
File "/System/Library/Frameworks/Python.framework/Versions/2.7/Extras/lib/python/twi sted/internet/defer.py", line 1097, in _inlineCallbacks
    result = result.throwExceptionIntoGenerator(g)
2015-01-21 21:50:00+0100 received postgres stderr   File "/System/Library/Frameworks/Python.framework/Versions/2.7/Extras/lib/python/twi sted/python/failure.py", line 389, in throwExceptionIntoGenerator
    return g.throw(self.type, self.value, self.tb)
File "/Applications/Server.app/Contents/ServerRoot/usr/bin/xpg_ctl", line 1994, in do_everything
    result = yield self.command_object.execute()
File "/System/Library/Frameworks/Python.framework/Versions/2.7/Extras/lib/python/twi sted/internet/defer.py", line 1097, in _inlineCallbacks
    result = result.throwExceptionIntoGenerator(g)
File "/System/Library/Frameworks/Python.framework/Versions/2.7/Extras/lib/python/twi sted/python/failure.py", line 389, in throwExceptionIntoGenerator
    return g.throw(self.type, self.value, self.tb)
File "/Applications/Server.app/Contents/ServerRoot/usr/bin/xpg_ctl", line 1726, in execute
    yield xpg.do_restore()
File "/System/Library/Frameworks/Python.framework/Versions/2.7/Extras/lib/python/twi sted/internet/defer.py", line 1099, in _inlineCallbacks
    result = g.send(result)
File "/Applications/Server.app/Contents/ServerRoot/usr/bin/xpg_ctl", line 1028, in do_restore
    did_upgrade = self.upgrade_cluster_if_needed()
File "/Applications/Server.app/Contents/ServerRoot/usr/bin/xpg_ctl", line 1452, in upgrade_cluster_if_needed
2015-01-21 21:50:00+0100 received postgres stderr     os.rename(self.data_directory, orig_data_dir)
exceptions.OSError: [Errno 66] Directory not empty
2015-01-21 21:50:00+0100 postgres process ended with status 256
2015-01-21 21:50:00+0100 Could not start postgres; see postgres.log
2015-01-21 21:50:01+0100 Can't start or connect to postgres
Failed to start service.
2015-01-21 21:50:01+0100 Main loop terminated.
calendarcommonextra: Jan 21 21:50:01 Executing: /Applications/Server.app/Contents/ServerRoot/usr/sbin/serverctl enable service=org.calendarserver.agent
calendarcommonextra: Jan 21 21:50:01 Output: {
calendarcommonextra: Jan 21 21:50:01 Executing: /Applications/Server.app/Contents/ServerRoot/usr/sbin/serverctl enable service=org.calendarserver.relocate
calendarcommonextra: Jan 21 21:50:01 Output: {
calendarcommonextra: Jan 21 21:50:01 Executing: /bin/launchctl start org.calendarserver.agent
calendarcommonextra: Jan 21 21:50:01 Executing: /Applications/Server.app/Contents/ServerRoot/usr/libexec/calendarserver_log_con f
calendarcommonextra: Jan 21 21:50:01 Allowing supervisor to enable service
calendarcommonextra: Jan 21 21:50:01 Configuring reverse proxies
Also in the servermgr_calendar.log I see this message repeating:
[cal] 1/21/15, 9:52:46 PM GMT+1 : Command getState duration 20.40 seconds
[cal] 1/21/15, 9:52:46 PM GMT+1 : getState releasing request lock
[cal] 1/21/15, 9:52:46 PM GMT+1 : Command getState received
[cal] 1/21/15, 9:52:46 PM GMT+1 : getState attempting to acquire request lock...
[cal] 1/21/15, 9:52:46 PM GMT+1 : getState acquired request lock
[cal] 1/21/15, 9:52:46 PM GMT+1 : getState begin
[cal] 1/21/15, 9:52:46 PM GMT+1 : Read Settings
[cal] 1/21/15, 9:52:46 PM GMT+1 : calendarServerOperationWithRequest
[cal] 1/21/15, 9:52:46 PM GMT+1 : Calling agent...
[cal] 1/21/15, 9:53:02 PM GMT+1 : Agent failure: The request timed out.
[cal] 1/21/15, 9:53:02 PM GMT+1 : Agent returned...
    error = "The request timed out.";
Thanks for the help.
Best regards
Rob

for testing purposes I renamed the data folder and started the calendar service again.
The new data folder got created but the loop like below is still showing up every 10 seconds:
[cal] 1/21/15, 9:52:46 PM GMT+1 : Command getState duration 20.40 seconds
[cal] 1/21/15, 9:52:46 PM GMT+1 : getState releasing request lock
[cal] 1/21/15, 9:52:46 PM GMT+1 : Command getState received
[cal] 1/21/15, 9:52:46 PM GMT+1 : getState attempting to acquire request lock...
[cal] 1/21/15, 9:52:46 PM GMT+1 : getState acquired request lock
[cal] 1/21/15, 9:52:46 PM GMT+1 : getState begin
[cal] 1/21/15, 9:52:46 PM GMT+1 : Read Settings
[cal] 1/21/15, 9:52:46 PM GMT+1 : calendarServerOperationWithRequest
[cal] 1/21/15, 9:52:46 PM GMT+1 : Calling agent...
[cal] 1/21/15, 9:53:02 PM GMT+1 : Agent failure: The request timed out.
[cal] 1/21/15, 9:53:02 PM GMT+1 : Agent returned...
    error = "The request timed out.";

KMC - DB migration fails (EP6- NW)

Hi
I am migrating an SP2 portal with heavy KMC content into a NW environment. I am currently using the KMC Migration Tool (Patch 8) and I have successfully completed the first 2 steps (Reports and ETC). Now I am at step 3 (DB Migration). After pressing "Start" the tool runs for about 20 seconds, then it stops with the following exception:
1122892441241#INFO.- Migarting Workflow data...
1122892441241#INFO.-     (migrating BP_CLASSDEF)
1122892441335#INFO.-     (migrating BP_CONDITION)
1122892441522#INFO.-     (migrating BP_I18N_PROP)
1122892441585#INFO.-     (migrating BP_ORGUNIT)
1122892441741#INFO.-     (migrating BP_ORGUNIT_MEM)
1122892441991#INFO.-     (migrating BP_ROLE)
1122892442038#INFO.-     (migrating BP_ROLE_CRITERIA)
1122892442069#INFO.-     (migrating BP_ROLE_CRITPARAM)
1122892442178#INFO.-     (migrating BP_ROLE_PARAM)
1122892442241#INFO.-     (migrating OBJCACHE_METADATA)
1122892442538#INFO.-     (migrating OBJCACHE_METAOPS)
1122892442663#INFO.- took 563 ms to read 86609 ids
1122892442897#INFO.-     (migrating OBJCACHE_SHARED)
1122892443319#INFO.-     (migrating OBJCACHE_TABCOLS)
1122892443397#INFO.- migration of task RelGeneric completed after 2638 steps and 00:00:01.687 ms
1122892443913#INFO.-     (migrating OBJCACHE_TYPES)
1122892444053#INFO.-     (migrating WF_APPLICATION)
1122892444163#INFO.-     (migrating WF_BUSINESSPROCESS)
1122892444272#ERROR.- failed to migrate task Sub: Insert Resource. RIDKEY cannot be NULL, or was too long.
Sid: 7a72d433-0401-0010-8fb1-fe91b9f2e6b5
Urikey: key=key=key=a3b601b2
Uri: /room\4extensions/cm\4stores/documents/workspaces/d0c687f8-0201-0010-32b7-acb3121ee3ee/Resources/Requests/Archive/Mockup\4BusinessCons\4Germany.xls
isCollection:
State:
Displayname: Mockup\4BusinessCons\4Germany.xls
stack:
java.lang.IllegalArgumentException: Insert Resource. RIDKEY cannot be NULL, or was too long.
Sid: 7a72d433-0401-0010-8fb1-fe91b9f2e6b5
Urikey: key=key=key=a3b601b2
Uri: /room\4extensions/cm\4stores/documents/workspaces/d0c687f8-0201-0010-32b7-acb3121ee3ee/Resources/Requests/Archive/Mockup\4BusinessCons\4Germany.xls
isCollection:
State:
Displayname: Mockup\4BusinessCons\4Germany.xls
     at com.sap.netweaver.bc.migration.ui.MigrateSubscription.insertResource(MigrateSubscription.java:290)
     at com.sap.netweaver.bc.migration.ui.MigrateSubscription.runMigration(MigrateSubscription.java:111)
     at com.sap.netweaver.bc.migration.ui.MigrationRunner.localRun(MigrationRunner.java:183)
     at com.sap.netweaver.bc.migration.ui.MigrationRunner.run(MigrationRunner.java:35)
Does anybody know what is causing this error, and how I can solve the problem?
Source system is EP6 SP2 Patch 31
Target system is EP6 SP9 Patch 8 with KMC Patch 3
Many thanks,
Jakob

I have solved the problem myself. There was an inconsistency in the WCM database. In the table "wcm_sub_resources" some entries had an urikey starting with "key=". I deleted these rows and ran the migration again. Now it works.
Here is the approach:
Open Enterprise Manager on DB host. In database "WCM" find the table "wcm_sub_resources" and choose "Return all rows". In the SQL editor type the following query:
SELECT *
FROM wcm_sub_resources
ORDER BY urikey
Now scroll to the bottom and delete all rows where urikey starts with "key="
Regards,
Jakob

Supplemental/vda-migrate fails: missing com/sun/vda/service/TextCipher

Hi,
just tried vda-migrate to upgrade my test installation (single host) from vda_3.0 to the new 3.1 version.
This fails as seen below (added -verbose:class to the line calling java in vda-migrate:doExport).
Any idea where class 'com/sun/vda/service/TextCipher' could be found (at least it's not defined in
any .jar-file in vda_3.{0,1}/Solaris_10+/i386/Packages/SUNWvda*...)
Kurt
[Loaded java.security.cert.Certificate from /usr/jdk/instances/jdk1.6.0/jre/lib/rt.jar]
[Loaded com.sun.vda.migrate.VdaMigrateExport from file:/var/home/ks/vda_3.1_image/.install/vdamigrate.jar]
[Loaded java.io.FileNotFoundException from /usr/jdk/instances/jdk1.6.0/jre/lib/rt.jar]
[Loaded java.util.Queue from /usr/jdk/instances/jdk1.6.0/jre/lib/rt.jar]
[Loaded java.util.Deque from /usr/jdk/instances/jdk1.6.0/jre/lib/rt.jar]
[Loaded java.util.AbstractSequentialList from /usr/jdk/instances/jdk1.6.0/jre/lib/rt.jar]
[Loaded java.util.LinkedList from /usr/jdk/instances/jdk1.6.0/jre/lib/rt.jar]
[Loaded java.util.LinkedList$Entry from /usr/jdk/instances/jdk1.6.0/jre/lib/rt.jar]
Exception in thread "main" java.lang.NoClassDefFoundError: com/sun/vda/service/TextCipher
Caused by: java.lang.ClassNotFoundException: com.sun.vda.service.TextCipher
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320)
[Loaded java.lang.Shutdown from /usr/jdk/instances/jdk1.6.0/jre/lib/rt.jar]
[Loaded java.lang.Shutdown$Lock from /usr/jdk/instances/jdk1.6.0/jre/lib/rt.jar]
Could not find the main class: com.sun.vda.migrate.VdaMigrateExport. Program will exit.
Data exported to directory '/tmp/asdf'
After installing and configuring Sun VDI 3.1 execute '/opt/SUNWvda/sbin/vda-migrate -i /tmp/asdf'
A log file is available at '/var/adm/log/vda-migrate.2009_09_15_21:47:25.log'.

Hi,
The VDI upgrade from 3.0 to 3.1 is not supported in 3.1 Early Access version.
vda-migrate 3.0-->3.1 will be available only in the 3.1 final release.
Thanks,
--Chirag

Ora8iR2 DB migration failed

Similar Messages

Maybe you are looking for