Oracl 9.2.0.4.0 on Fedora Core1

Hi, does any body have patches (3006854, 3119415) for FC1? I don't have access to metalink.
Thanks

Try following link:
http://www.oracle-base.com/articles/9i/Oracle9iInstallationOnFedora1.php

Similar Messages

Is it possible to Install Oracle Applications 11.5.10.2 to Fedora 8

Has anyone done this installing Oracle Applications 11.5.10.2 to Fedora 8?

Has anyone done this installing Oracle Applications 11.5.10.2 to Fedora 8? No, EBS is not certified with Fedora.
Please refer certification matrix in Metalink
https://metalink.oracle.com/metalink/plsql/f?p=140:1:3949930286230652971:::::
Mahesh

Oracle(9.0.1.0) Install On Fedora Core 1

Hi Everyone,
Has anyone installed oracle(9.0.1.0) on Fedora? Right now, when I run the installer('/Disk1/runInstaller'), I get this message:
symbol errno, version GLIBC_2.0 not defined in file libc.so.6 with link time reference (libzip.so)
Unable to intialize threads: cannot find class java/lang/Thread
Could not create Java VM
I'm guessing it's a JVM issue, what are the solutions?
-A

I did often find this link on this forum and I give it to you without guaranty ...
http://www.oracle-base.com/articles/10g/OracleDB10gInstallationOnFedora1.php

Oracle 9.2.0.4 install in Fedora problems

Hi!
Im trying to install Oracle 9.2.0.4 on Fedora Core 1 but I get the following error:
java.lang.UnsatisfiedLinkError: /opt/tmp/OraInstall2004-09-10_06-39-32PM/libactionFile170.so: /opt/tmp/OraInstall2004-09-10_
06-39-32PM/libactionFile170.so: undefined symbol: stat
This is after selecting all options in runInstaller window, any ideas?
thanks!!!

I'm having the exact same error on Fedora Core 3. Setting tmp to 777 has no effect. It was already 777 with the sticky bit set.
The link to togaware doesn't even talk about Oracle 9.2, only about 8i and 10g.
Does anybody else have an idea?
Thanks,
Ron

Oracle 10g Express on Fedora 14 64-bit howto

I wanted to test Oracle 10g XE using VMware and Fedora 14 and found the installation instructions form Oracle somewhat outdated and confusing. http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25144/toc.htm. Here are my installation notes - perhaps someone will find them helpful.
h3. Installation of Fedora and Oracle 10g XE:
h4. 1) Install Fedora 14 Desktop 64-bit form the Live DVD using the defaults.
Note: To open a terminal window, select Terminal from Applications/System Tools menu.
h4. 2) Edit /etc/selinux/config to disable SELinux:
# su - root
# vi /etc/selinux/config
SELINUX=disabled
h4. 3) Install required software including 32-bit libraries:
$ su - root
# yum install install bc libc.so.6 libaio.so.1 gcc libaio compat-libstdc++-33
h4. 4) Download and install Oracle 10g XE:
http://technet.oracle.com
$ su - root
# cd /home/<your_usename>/Downloads
# yum install --nogpgcheck oracle-xe-univ-10.2.0.1-1.0.i386.rpm
h4. 5) Configure Oracle 10g XE:
# /etc/init.d/oracle-xe configure
h4. 6) Configure your regular fedora user account:
$ su - root
# /usr/sbin/groupadd -r dba
# usermod -G dba <your username>
# su - <your username>
$ echo "source /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/oracle_env.sh" >> $HOME/.bashrc
Logout for the change to take affect!
To access the Database Home Page go to "http://127.0.0.1:8080/apex
h3. Remote Access:
h4. 1) Enable remote ssh login:
$ su - root
# service sshd start
# chkconfig --level 345 sshd on
h4. 2) Configure Network Firewall from System/Administration menu:
Other Ports
Add
User defined
Do this for ports 8080 and 1521
Apply
h3. VMWare Tools installation:
+Note: configure your guest OS for Bridged Networking and fixed IP+
$ su - root
# yum install gcc make kernel-devel perl
At your VMware guest menu, select "install VMware Tools"
Right click on VMwareTools-xxx.tar.gz and extract it to the Desktop
Open a terminal window and type the following:
$ su - root
# cd /home/<your_username>/Desktop/vmware-tools-distrib
# ./vmware-install.pl
Continue to press Return and accept defaults.
# reboot
h3. Troubleshooting:
h4. ssh port 22: Connection refused
The Network Firewall is enabled by default, but port 22 is open.
You may try to simply disable/apply and enable/apply and try again - strange, but worked for me.
( +service iptables restart+ did not resolve this)
h4. Check if the ssh daemon is running:
# lsof -i tcp:22
h4. Use sqlplus to reset your passwords:
Make sure you properly configured your regular fedora user account as outlined above:
$ sqlplus / as sysdba
SQL> alter user sys identified by "password" account unlock;
SQL> alter user system identified by "password" account unlock;
h4. Start and stop Oracle XE:
# su - root
# /etc/init.d/oracle-xe start
# /etc/init.d/oracle-xe stop
h3. Related Links:
https://fedorahosted.org/spacewalk/wiki/OracleXeSetup

I got Oracle 11gR2 running on 64-bit Fedora 14 x86_64 - you do need a mix of x64_86 and i686 (32-bit) packages as given here:
http://download.oracle.com/docs/cd/B28359_01/install.111/b32285/toc.htm
These aren't exact matches on version numbers so when runInstaller doesn't pass validation, just check "Ignore". This will fail during linking, so follow along below and the rest will go smoothly:
installation error in invoking target 'agent nmhs'
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Hi.
So you want to build for fedora 13 without getting the error...
When you start to install with ./runInstaller, run in another terminal window (as root)
ls $ORACLE_HOME/sysman/lib/ins_emagent.mk
At first this will produce an error, as the installer wont have created this file yet.
Once the file exists, do:
vi $ORACLE_HOME/sysman/lib/ins_emagent.mk
Search for the line
$(MK_EMAGENT_NMECTL)
Change it to:
$(MK_EMAGENT_NMECTL) -lnnz11
If you do it within 30-40 seconds of the file appearing, you should not get any errors and the build will go fine. If you get an error, finish your edit then click on retry.
Hope that helps.
Gordon.
Edited by: [email protected] on 07-Jul-2010 06:54
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

ORA-19624 while creating a DB with dbca on Oracle 10.2.0.1 on Fedora Core 4

Hi,
I have big problems creating a database with the Database Configuration Assistant on Oracle 10.2.0.1, on a - Fedora Core release 4 (Stentz).
Running the dbca tool, I select the following options:
- Create a Database
- General Purpose
- Then all defaults options
And I get many errors.
The first one is the following:
ORA-19624: operation failed, retry possible
ORA-19870: error reading backup piece /opt/app/oracle/product/10.2.0.1/assistants/dbca/templates/General_Purpose.dbc
ORA-19505: failed to identify file "/opt/app/oracle/product/10.2.0.1/assistants/dbca/templates/General_Purpose.dbc"
ORA-27046: file size is not a multiple of logical block size.
Can someone help me solving this problem?
What are the log files you need to solve it?
Thank you very much.

Is the file "General_Purpose.dbc" available under "/opt/app/oracle/product/10.2.0.1/assistants/dbca/templates/"?
Could you post the directory listing?
Also, can you check rights on above folder for oracle user?
Finally check metalink document 370972.1

Installing Oracle Apps 11.5.9 on Fedora Core Release 1

Hello.
I was wondering if there is anyone out there who knows whether it's possible to install Oracle Apps. 11.5.9 on Fedora Core Release 1 or anyone who has already installed Oracle Apps. 11.5.9 on Fedora Core Release 1.
If so, do you have any advise, do's/don't etc...
Any info is greatly appreciated.
Many thanks,
Vandana.

Vandana,
If you check for all documents, the wordings used will be "11i is certified on Linux x86". However, note that this always means RedHat AS or ES. Fedora is not certified.
Warm Regards
Vinod Subramanian

Oracle 10G on fedora 15

Hi all,
I want to install oracle 10G(10.2) Database express on fedora 15.
I followed all the prescribed steps but still unable to get it done.That's why I had to post the question.
I am writing all the commands that i used and also the errors so that you all may correct me.
After increasing the swap size of my linux system to prescribed 1GB,I installed oracle 10G in my system.
The swap files status is correctly shown using the swapon command,so this does not seems to be an issue.
But the real problem starts when I try to start the listener.....
The classpath settings in my /etc/profile is as follows:
export ORACLE_HOME="/usr/lib/oracle/xe/app/oracle/product/10.2.0/server"
export PATH=$ORACLE_HOME/bin:$PATH:/usr/local/jdk/bin:/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/lsnrctl:/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/oracle:/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/sqlplus:/usr/lib/oracle
export ORACLE_SID="XE"
export NLS_LANG="AMERICAN_AMERICA.US7ASCII"
export LD_LIBRARY_PATH="ORACLE_HOME/lib:$LD_LIBRARY_PATH"
export SQLPATH="$ORACLE_HOME/sqlplus/admin"
Now where am i wrong in these settings,if i am?
The listener.ora file is
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /usr/lib/oracle/xe/app/oracle/product/10.2.0/server)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
# (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE)) //I have commented this line//
(ADDRESS = (PROTOCOL = TCP)(HOST = shekhar)(PORT = 1521))
DEFAULT_SERVICE_LISTENER = (XE)
Now ,the series of error appears when i try to login from sqlplus
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux Error: 2: No such file or directory
also,I am unable to open the home page for my login on my browser.
Starting the listener,by command lsnrctl start,i get following error
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=shekhar)(PORT=1521)))
TNS-12535: TNS:operation timed out
TNS-12560: TNS:protocol adapter error
TNS-00505: Operation timed out
Linux Error: 110: Connection timed out
I also get 'resource already in use' error sometimes.That is to say,I never have my listener started.Do I have to make any changes in my listener.ora file?
That's all I have to mention.
I request you all to please help me out of this problem.Any help will be really appreciated.
Waiting for your reply.
Thanks.....................................................

Verify the hostname and IP address, that they resolve both ways (hostname and IP), also check netstat to ensure nothing else has the 1521 port in use. The HOST= listener entry ought to be the FQDN, it could be the IP, or when in doubt (i.e. if the host uses DHCP) the "any IP" address of 0.0.0.0 can also work. For the "easy" way out.
$ hostname
$ nslookup -sil <hostname>
... -> n.n.n.n
$ nslookup -sil <n.n.n.n>
... -> <hostname>
$ cat /etc/hosts
127.0.0.1 localhost.localdomain localhost
n.n.n.n <hostname>.<domainname> <hostname>
$ netstat -an |egrep 1521
# if there is a:
... tcp <n.n.n.n>:1521 0.0.0.0:* ... LISTEN...
# pick a different port. Add the port# exception to the firewall. If you want remote connections.Is the network interface enabled?
$ ifconfig -a
ethN ... <n.n.n.n> ...Make sure it has an IPv4 address and its correct.
export NLS_LANG="AMERICAN_AMERICA.US7ASCII"That isn't needed, and isn't correct, the character set should be AL32UTF8. And won't have any effect except for stuff you're running at the command line, i.e. expdp, the older exp, or some other client utility.
... IPC ... //I have commented this line//That's fine. It isn't needed.
Check the alertlog for the startup attempt. The engine may gripe on a memory parameter setting, can't recall the exact error but it has to do with changes in shared memory stuff. I've installed to Fed15 with no trouble, other than having a few MB short of a full 1GiB allocated to swap.
For trying startup/shutdown use a switch user oracle and the instance will be much happier. And add your userID to the ora group to allow a sysdba connection without using the su ... oracle bits, but only when you're not doing a startup.
Sometimes the ...env.sh barfs on the NLS environment .sh call, but it's not critical. To make it really easy pull those bits from the ...env.sh into your own ora_env file to source.
$ ... set environment <period><space>...OH/bin/oracle_env.sh
   # OR set up your own ~/ora_env
   $ cd
   $ egrep -v NLS ...OH/bin/oracle_env.sh > ora_env
   $ . ./ora_env
$ sudo su - oracle -c "sqlplus /nolog"
... connect /as sysdba
... ? connected ... Idle Instance ? ... startup;
$Edited by: clcarter on Jan 20, 2012 12:44 PM
fix env .sh

Fedora release 11 (Leonidas) oracle stopped working

Oracle 11g1 under Fedora 9 has worked great since 11/2008
I upgraded to Fedora 10 and Oracle 11g1 worked great
I upgraded to Fedora release 11 (Leonidas) and now:
[oracle@LMKIII ~]$ sqlplus / as sysdba
SQL*Plus: Release 11.1.0.6.0 - Production on Sat Aug 15 16:06:54 2009
Copyright (c) 1982, 2007, Oracle. All rights reserved.
Connected to an idle instance.
SQL> dbstart
SP2-0042: unknown command "dbstart" - rest of line ignored.
I am looking into changes to PATH that may have been made in the upgrade.
Thought I'd see if anybody else has had this problem first!

thanks...wow I really forgot a lot since last November!
I started 11g1 and showed it was working!
All I need is to find out why dbora (autostart)no longer works as of Fedora 11.
[oracle@LMKIII ~]$ cat /etc/rc.d/init.d/dbora
#! /bin/sh -x
# Change the value of ORACLE_HOME to specify the correct Oracle home
# directory for your installation.
ORACLE_HOME=/u01/app/oracle/product/11.1.0/db_1
# Change the value of ORACLE to the login name of the
# oracle owner at your site.
ORACLE=oracle
PATH=${PATH}:$ORACLE_HOME/bin
HOST=`hostname`
PLATFORM=`uname`
export ORACLE_HOME PATH
if [ ! "$2" = "ORA_DB" ] ; then
if [ "$PLATFORM" = "HP-UX" ] ; then
remsh $HOST -l $ORACLE -n "$0 $1 ORA_DB"
exit
else
rsh $HOST -l $ORACLE $0 $1 ORA_DB
exit
fi
fi
case $1 in
'start')
$ORACLE_HOME/bin/dbstart $ORACLE_HOME &
'stop')
$ORACLE_HOME/bin/dbshut $ORACLE_HOME &
echo "usage: $0 {start|stop}"
exit
esac
exit

How to adjust Fedora Parameters

I'm trying to install the oracle 11g database (I believe this is the lastest) on a fedora 17 on virtual box (latest version) on Windows 7 and I'm bumping into the following limits:
(1) Hard Limit: maximum open file descriptors: exected value 65536 Actual value 4096.
How do I adjust this parameter?
(2)Hard Limit: maximum user processes: Expected value: 16384 Actual value: 11670.
How do I adjust this parameter?
(3) Soft Limit: maximum user processes: Expected Value: 2047 Actual value 1024.
What is the difference between this and the last one? How do I adust this?
(4) OS Kernal Parameter: semopm expected value 100, actual value :32
How do I adjust this?
(5) OS Kernel Parameter shmmax Expected value 536870912, actual value 33554432.
How do I adjust this?
(6) OS kernel parameter "file-max" Expected value 6815744, Actual value 149348
(7) OS Kernel Parameter ip_local_port_range expected value: 9000 & 65500 Actual value 32768 & 61000
(8) OS kernel parameter rmem_default, expected value: 262144, actual value 163840
(9) OS kernal parameter rmem_max, expected value 4194304, actual value 131071
(10) OS Kernal Parameter: wmem_default, expected value: 262144, actual value : 163840
(11) OS Kernel Parameter: wmem_max, expected value 1048576, actual value 131071
(12) OS Kernel parameter: aio-max-nr: expected value: 1048576, actual value 65536
(13) Package binutils-2.15.92.0.2, actual value: missing
(14) Package gcc-3.4.6, actual value: missing
(15) A dozen other missing packages... Can multiple version versions of the same package (such as bintutils) co-exist and satisfy oracle? If not, do I have to uninstall the old one before installing the newer (or older) version? I assume I can do this with yum?
I received a nice response at [http://forums.fedoraforum.org/showthread.php?p=1601338#post1601338] and I tried looking in the welcome.html file which had links to other documents that I searched. However, I could not find the instructions for adjusting these parameters in fedora (or any other OS). Can some one point me (more precisely) to the instructions for adjusting these parameters?
Thanks
Siegfried

Hi;
1. Fedora is not certified platform
2. Please download&use OEL 5.x for your oracle installation.
3. If you insist to install oracle on not certified platfrom fedora 17. Please see Tim's blog:
http://www.oracle-base.com/blog/2012/05/30/fedora-17-and-oracle-11gr2/
PS:Please dont forget to change thread status to answered if it possible when u belive your thread has been answered, it pretend to lose time of other forums user while they are searching open question which is not answered,thanks for understanding
Regard
Helios

Oracle 10g express - post installation

Hi All !
I installed Oracle 10g exp. on my linux system (fedora core 4) yesterday. I am very new to both the linux os and oracle db. So I'm sure I messed up somewhere, though I can't figure out where....if anyone could help me....here is the problem
installation was successful...I configured Oracle db with default http port:8080, listener: 1521 and the password.
after installation I don't see oracle icons on my redhat menu. I tried opening in the browser with this
http://(hostname):8080/htmldb and it does not bring up anything. I may be doing something wrong in looking up the hostname...here is the listener.log file....I'd appreciate if any1 could tell me what is wrong.
Thank you,
-----------------------------listener.log-----------------------------
System parameter file is /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin/listener.ora
Log messages written to /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/log/listener.log
Trace information written to /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/trace/listener.trc
Trace level is currently 0
Started with pid=10287
Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=pcp0010100038pcs.levtwn01.pa.comcast.net)(PORT=1521)))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
Linux Error: 99: Cannot assign requested address

I encountered this issue on my laptop and realized it was because I installed Oracle XE when connected via DHCP. I never manually specified a hostname so my install was burned with crazy DHCP hostnames which of course change every time I get onto my work network. So to fix it, I did the following:
1. Hard set a hostname (Fedora Core 6 /etc/sysconfig/network + hostname command)
2. Updated tnslistener.ora and tnsnames.ora to use the new hostname
3. force-reload
All good. JDBC connects, "service oracle-xe status" is good and the home page is back.

Oracle 10g Espress Edition and change ORACLE_SID

I had installed Oracle Database 10g Express Edition whith linux, fedora core 4.
I want to change the database name and oracle_sid.
Oracle Database XE Server install autimatically a database. The database name and SID is XE.

Is there a reason that you want to change the database name, or you could simply change the service names ?
[oracle ~ XE]$ sqlplus / as sysdba
SQL*Plus: Release 10.2.0.1.0 - Production on Mon Oct 16 10:19:40 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
SYS@XE SQL> show parameter db_name
NAME                                 TYPE        VALUE
db_name                              string      XE
SYS@XE SQL> alter system set service_names = 'testdb';
System altered.
SYS@XE SQL> conn test/test@localhost/testdb
Connected.
TEST@localhost/testdb SQL> select * from global_name;
GLOBAL_NAME
XE
TEST@localhost/testdb SQL>

Running/Compiling *.java file in Oracle Sql Developer

I want to compile/run java 5.0 files in Oracle sql developer1.1.2.25 on Fedora 5 platform.
I have added javac as an enternal tool to compile java programs. Tools-->External Tools-->New
I have also added java: /usr/java/jre1.5.0_10/bin/java as an external tool to run the complied programs
I am able to compile the java programs, but i am not able to run them.
I am providing ${file.name.no.ext} as an argument to java.
Java-Log Output is:
/usr/java/jre1.5.0_10/bin/java Writer2
Exception in thread "main" java.lang.NoClassDefFoundError: Writer2
However, if i run the same program in Linux terminal, i get the correct output:
[root@localhost java]# which java
/usr/java/jre1.5.0_10/bin/java
[root@localhost java]# /usr/java/jre1.5.0_10/bin/java Writer2
12
howdy
folks
How can i make Oracle Sql Developer run the java program?

I will echo the use jdev comment..
Regardless, you may want to check the execute in directory.. or add a -cp parameter.
Eric

Oracle xe 11g on CentOS 6 x64

I have try installed Oracle xe 11g on CentOS 6 x64. But when I follow the Installation guide for running
/etc/init.d/oracle-xe configure
I got this message:
Starting Oracle Net Listener...Done
Configuring database...
Database Configuration failed. Look into /u01/app/oracle/product/11.2.0/xe/config/log for details
When I checked the log file, mostly the errors are about:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
ORA-00119: invalid specification for system parameter LOCAL_LISTENER
ORA-00130: invalid listener address '(ADDRESS=(PROTOCOL=TCP)(HOST=172.19.10.170)(PORT=1521))'
Any clue about this errors about?
Thanks

this problem has been solved. I refer to this thread Installing Oracle Database 11g XE Beta 2 on Fedora 15 (x64) when solving it.

10.1.3 on Fedora Core6 - Error

Hi All,
I am installing oracle 10g AS (10.1.3) on Fedora Core 6 but when installation process reaches to 89% (Linking 'oracle Net required support Files 10.1.0.2.0'), one error diolog box apear on installation screen showing the following error.
Error in invoking target 'ntcontab.0' of makfile '/apps/oracle/product/10.1.3/10g_AS1/network/lib/ins_net_client. mk'.
If I ignore it then Net configuration assistant fails.
Please help me out... thanks a lot in advance :)

Problem solved ! GCC was missing...
Just for the reference, we installed the following RPMS:
libgomp-4.1.1-30.i386.rpm
glibc-headers-2.5-3.i386.rpm
glibc-devel-2.5-3.i386.rpm
gcc-4.1.1-30.i386.rpm
Thanks :)

Oracl 9.2.0.4.0 on Fedora Core1

Similar Messages

Maybe you are looking for