Oracle 10.2.0.3 does not use hugepages..

Hello,
We have RHEL4 x86_64 AMD server. Oracle 10.2.0.3 database is running on it.
We want to configure hugepage for database.
We followed the belov step;
1. we added vm.nr_hugepages = 1024 into /etc/sysctl.conf
2. we added <dblinuxuser> hard memlock 2097152
3. we added ulimit -l 2097152 for dblinux user.
4. reboot linux
5. start db
The database has 2G sga.
Additional informations;
uname -a
Linux scetstdb01 2.6.9-42.ELsmp #1 SMP Wed Jul 12 23:32:02 EDT 2006 x86_64 x86_64 x86_64 GNU/Linux
SQL> select * from v$version;
BANNER
Oracle Database 10g Release 10.2.0.3.0 - 64bit Production
PL/SQL Release 10.2.0.3.0 - Production
CORE 10.2.0.3.0 Production
TNS for Linux: Version 10.2.0.3.0 - Production
NLSRTL Version 10.2.0.3.0 - Production
SQL> show sga
Total System Global Area 2197815296 bytes
Fixed Size 2074216 bytes
Variable Size 570427800 bytes
Database Buffers 1610612736 bytes
Redo Buffers 14700544 bytes
scetst01@scetstdb01>cat /proc/meminfo
MemTotal: 4040108 kB
MemFree: 26076 kB
Buffers: 2360 kB
Cached: 1362092 kB
SwapCached: 3640 kB
Active: 1756100 kB
Inactive: 30960 kB
HighTotal: 0 kB
HighFree: 0 kB
LowTotal: 4040108 kB
LowFree: 26076 kB
SwapTotal: 8385920 kB
SwapFree: 8234756 kB
Dirty: 332 kB
Writeback: 0 kB
Mapped: 1727604 kB
Slab: 40936 kB
CommitLimit: 9357396 kB
Committed_AS: 3587296 kB
PageTables: 57832 kB
VmallocTotal: 536870911 kB
VmallocUsed: 266784 kB
VmallocChunk: 536604111 kB
HugePages_Total: 1024
HugePages_Free: 1024
Hugepagesize: 2048 kB
ulimit -a
time(cpu-seconds) unlimited
file(blocks) unlimited
coredump(blocks) unlimited
data(kbytes) unlimited
stack(kbytes) 10240
lockedmem(kbytes) 2097152
memory(kbytes) unlimited
nofiles(descriptors) 65536
processes 16384

Fine. We solved the problem.
If you set vm.nr_hugepages = memlock in the limits.conf then it does not run. You shuld set memlock value greater then value of vm.nr_hugepages.

Similar Messages

Class oracle/jpub/runtime/dbws/DbwsProxy does not exists on 10g Rel2

I trying using UTL_DBWS with samle from url http://www.freelists.org/archives/oracle-l/03-2005/msg00670.html in 10g Rel2 but I take error: class oracle/jpub/runtime/dbws/DbwsProxy does not exists .What I do incorrect?
However, using web service in Oracle rdms very hard...May be exists simply example for dummies?

Not really for dummies, but it may be a good way to get started:
Oracle Database Programming Using Java and Web Services, by Kuassi Mensah.
You have also the following resouces on OTN: Database Web Services.
-- Eric

Query does not uses indices

I am using 10.2.0.1 database instance and wrote a SQL query which involves several tables but I had made sure all columns in where clause has got proper indexes. The query is fairly simple does not use any function etc. in where clause but inner joins.
I have analyzed schema statistics using dbms_stats.gather_schema_stats... procedure and also added new required indexes to support this query.
Now when I see explain plain for this query it still does full table scan? I do not understand why it is not using indices and does full table scan.
Any comments?

Pgoel,
The plan that you posted with the proper tags to help when reading the plan:
| Id | Operation                     | Name               | Rows | Bytes | Cost | Time      |
| 0   | SELECT STATEMENT              |                    |       |       |   279 |           |
| 1   | HASH UNIQUE                  |                    |   692 | 130K |   279 | 00:00:04 |
| 2   |   NESTED LOOPS                |                    |   692 | 130K |   247 | 00:00:03 |
| 3   |    HASH JOIN                  |                    |    12 | 2184 |   223 | 00:00:03 |
| 4   |     HASH JOIN                 |                    |    12 | 2028 |   212 | 00:00:03 |
| 5   |      HASH JOIN                |                    |    12 | 1608 |   203 | 00:00:03 |
| 6   |       HASH JOIN               |                    | 3855 | 248K |    45 | 00:00:01 |
| 7   |        HASH JOIN              |                    | 3855 | 132K |    20 | 00:00:01 |
| 8   |         TABLE ACCESS FULL     | COD_SCHED_ITEMS    | 3970 |   39K |     6 | 00:00:01 |
| 9   |         HASH JOIN             |                    | 3064 |   75K |    13 | 00:00:01 |
| 10 |          INDEX FAST FULL SCAN | COD_SCHED_POLICY_PK| 3064 |   24K |     3 | 00:00:01 |
| 11 |          TABLE ACCESS FULL    | COD_SCHEDULE       | 3155 |   52K |     9 | 00:00:01 |
| 12 |        TABLE ACCESS FULL      | COD_ASSET          | 4982 | 151K |    25 | 00:00:01 |
| 13 |       TABLE ACCESS FULL       | COR_ACL            |   46K | 3124K |   157 | 00:00:02 |
| 14 |      TABLE ACCESS FULL        | COR_POLGROUP       | 3236 | 111K |     8 | 00:00:01 |
| 15 |     TABLE ACCESS FULL         | COR_BASE_PRICE     | 3247 |   41K |    11 | 00:00:01 |
| 16 |    INDEX RANGE SCAN           | QAM_LOG_URI_IX     |    58 |   580 |     2 | 00:00:01 |
----------------------------------------------------------------------------------------------Obtaining the plan from the 10053 trace was likely a minor goal of Sybrand when he suggested activating the trace. The plan implies that the cost based optimizer determined that Oracle would require 0.04 seconds to execute the plan and return the data. Does it take much longer than 0.04 seconds for the query to execute?
As Sybrand pointed out, the 10053 trace shows the decisions made by the cost based optimizer when trying to determine the most efficient plan. If a potential step in the plan is determined to be more expensive (costly, assumed to require more time to execute) than a previously found method, the potential plan step is aborted. This process continues until one of:
* All join order possibilities have been tried (8! = 40,320 possible)
* 2,000 join order possibities have been tried
* The continued examination of join combinations will require more time than Oracle predicts for the execution of the query.
* And probably something else.
The process and decisions made by the cost based optimizer are included in the 10053 trace. For some reason, possibily bad statistics, inappropriate initialization parameters, cardiality calcuation problems, or something else, Oracle calculated that retrieving the data from the tables using a full tablescan is less costly than an index access path. The 10053 trace will show why that happened.
Charles Hooper
IT Manager/Oracle DBA
K&M Machine-Fabricating, Inc.

Oracle Applications 11i Load Balancing does not work with RAC one Node

Hi all,
Could you help me to resolve this issue.
Architecture environment is :
- One APPS tier node
- Two nodes Oracle Database Appliance (Primary node 1 holds INSTANCE_1 et Secondary node is configurured to holds INSTANCE_2), i.e RAC one Node.
- The primary node have instance_name SIGM_1 and the secondary node have instance_name SIGM_2, but in RAC one node, the secondary instance is not alive.
We convert our EBS 11i environment to RAC following note ID Using Oracle 11g Release 2 Real Application Clusters with Oracle E-Business Suite Release 11i [ID 823586.1].
When testing Database failover, Oracle Applications 11i load balancing does not work anymore.
The root cause is that, when the primary node of the Rac one node is down, the INSTANCE_NAME_1 is automaically relocating to the surviving node,.
During test failover, we imagine that when the primary node goes down, the secondary node start or relocate database with instance_name SIGM_2, and in that case the Oracle Applications load balancing works.
Currently, when the primary node goes down, the instance_name SIGM_1 is relocated on the secondary node, which cause failure of Oracle Applications Load Balancing.
Thank you for your advice.
Moussa

This is something I observed a long time ago for Safari (ie: around version 1). I'm not sure this is Safari, per se, but OpenSSL that is responsible for the behavior. I'm pretty sure Chrome does this and I've seen some Linux browsers do it.
What I have done at the last two companies I've worked for is recommend that our clients do not use SSL SessionID as the way of tracking sticky sessions on web servers, but instead using IP address. This works in nearly all cases and has few downsides. The other solution is to use some sort of session sharing on your web servers to mitigate the issue (which also means that your web servers aren't a point of failure for your users' sessions). (One of the products I supported had no session information stored on the web servers, so we could safely round-robin requests, the other product could be implemented with a Session State Server... but in most cases we just used IP address to load balance with). The other solution is to configure your load balancer to terminate the SSL tunnel. You get some other benefits from this, such as allowing your load balancer to reduce the number of actual connections to the web servers. I've seen many devices setup this way.
One thing to consider through this is that - due to the way internet standards work - this really can't be termed a bug on anyone's part. There is no guarantee in the SSL/TLS standards that a client will return the same SSL Session ID for each request and there is not requirement that subsequent requests will even use the same tunnel. Remember, HTTP is a stateless protocol. Each request is considered a new request by the web server and everything else is just trickery to try and get it to work the way you want. You can be annoyed at Safari's behavior, but it's been this way for over 5 years by my count, so I don't expect it to change.

Login that does not use https

I don't have access to https sites from my current work facility.
Do you have a login method that does not use HTTPS?
Is there any way that I can link my metalink account and my OTN account, and get to OTN through my metalink account?
David

Okay ... I fixed this, Oracle XE finally convinced them to let us have access to https at OTN.
David

Root cause for class oracle/jpub/runtime/dbws/DbwsProxy does not exist

Hi,
I am trying to use UTL_DBWS to call a webservice, adn getting a error " ORA-29540: class oracle/jpub/runtime/dbws/DbwsProxy does not exist "
its going back and forth between me and operations , I aske them to load the package but still the script fails. Is there any way to confirm whether the package is loaded , like the below script
as sys:
select status from all_objects where
dbms_java.longname(object_name)='oracle/jpub/runtime/dbws/DbwsProxy';
Please help to find the root cause

Please check if you have the grants on UTL_DBWS.

The application does not use the screen and run in the background

Hi
I have downloaded a package of j2me Midlet
from [link] here [link]
and try to reuse the code
but I get the following error when running the code:-
The application does not use the screen and run in the background
I think the error into one of these two classes
package main;
import javax.microedition.midlet.*;
import javax.microedition.midlet.*;
import javax.microedition.lcdui.*;
import javax.microedition.media.Manager;
import javax.microedition.media.MediaException;
import javax.microedition.media.Player;
import java.io.IOException;
import java.io.InputStream;
public class MainMidlet extends MIDlet implements CommandListener {
    private SSGameCanvas gameCanvas ;
    private Command exitCommand ;
    private Player player = null;
    public void startApp() {
try {
       //   create new game thread
          gameCanvas = new SSGameCanvas();
          gameCanvas.start(); // start game thread
          exitCommand = new Command("Exit",Command.EXIT,1);
          gameCanvas.addCommand(exitCommand);
          gameCanvas.setCommandListener(this);
            Display.getDisplay(this).setCurrent(gameCanvas);
   catch (java.io.IOException e)
            e.printStackTrace();
        try {
            // start sounds
            InputStream in = getClass().getResourceAsStream("/resource/startfly.wav");
            player = Manager.createPlayer(in,"audio/x-wav");
            player.setLoopCount(1);
            player.start();
        catch (MediaException ex)
            ex.printStackTrace();
         catch (IOException ex)
            ex.printStackTrace();
    public void pauseApp() {
    public void destroyApp(boolean unconditional) {
        if (player != null) {
            player.close();
        System.gc();
public void commandAction(Command command, Displayable displayable) {
       if (command == exitCommand)
             destroyApp(true);
             notifyDestroyed();
package main;
import java.io.IOException;
import javax.microedition.lcdui.*;
import javax.microedition.lcdui.game.*;
public class SSGameCanvas extends GameCanvas implements Runnable {
    protected GameManager gameManager;
    protected boolean running;
    private int tick=0;
    private static int WIDTH;
    private static int HEIGHT;
    private int mDelay = 20;
    Form mainForm;
    Display display;
    //private int MaxTime;
    public SSGameCanvas() throws IOException{
        super(true);
        gameManager = new GameManager(5,5,getHeight()-10,getWidth()-10,this);
    public void start() {
            this.running = true;
            Thread t = new Thread(this);
            t.start();
    public void stop() {
        running = false;
    public void render(Graphics g) {
        WIDTH = getWidth();
        HEIGHT = getHeight();
        // Clear the Canvas.
        g.setColor(0, 0, 50);
        g.fillRect(0,0,WIDTH-1,HEIGHT-1);
        // draw border
        g.setColor(200,0,0);
        g.drawRect(0,0,WIDTH-1,HEIGHT-1);
        // draw game canvas
        gameManager.paint(g);
    public void run() {
        while (running) {
            // draw graphics
            render(getGraphics());
            // advance to next graphics
            advance(tick++);
            // display
            flushGraphics();
            try { Thread.sleep(mDelay); }
            catch (InterruptedException ie) {}
    public void advance(int ticks) {
        // advance to next game canvas
        gameManager.advance(ticks);
        this.paint(getGraphics());
}Edited by: VANPERSIE on Jul 10, 2012 12:26 PM

Hi Andi,
Thanks for your reply.
Yes, I have waited for a while and the result doesn't change.
The Porblem here is the application is seen started in visual administrator.Only restart brings up the page back.
Can you please suggest anything.
Thanks and regards
Nagaraj

How to invoke a jsp page from java which does not use Servlets?

Hello,
I am working in Documentum. I am trying to invoke a jsp page from another java page which does not use Servlets.
I tried doing this by just instantiating the java class related to the jsp page from my present java class.In my java class related to the jsp page, I have defined onInit() and onRender() methods.
Now, I am trying to call the jsp page from my present java class by just instantiating the java class related to the jsp page. This throws a java.lang.NullPointerException.
Any comments or suggestions on this.Any help would be appreciated.
Thanks,
Ranjith M.V

RanjithM.V wrote:
Hello,
Thanks for the reply. One important thing I forgot to mention. I am also using xml component.And?
As this is the standard way used for coding in Documentum, I do not want to use Beans.Well, JSP's should, in and of themselves, contain no functional code. It should all be only display.
Without that is it not possible?What did I say? I said,
masijade wrote:
It is possible, but I very, very, very, much doubt, that it would be worth the effort.And, if you don't know how, a forum is not truely going to be able to help you implement it (at least not in less than a few years time, at which point it would be outdated).
>
Appreciate your understanding and help.
Thanks,
Ranjith M.V

Pam.conf does not use ldap for password length check when changing passwd

I have already posted this in the directory server forum but since it is to do with pam not using ldap I thought there might be some pam experts who check this forum.
I have dsee 6.0 installed on a solaris 10 server (client).
I have a solaris 9 server (server) set up to use ldap authentication.
bash-2.05# cat /var/ldap/ldap_client_file
# Do not edit this file manually; your changes will be lost.Please use ldapclient (1M) instead.
NS_LDAP_FILE_VERSION= 2.0
NS_LDAP_SERVERS= X, Y
NS_LDAP_SEARCH_BASEDN= dc=A,dc= B,dc= C
NS_LDAP_AUTH= tls:simple
NS_LDAP_SEARCH_REF= FALSE
NS_LDAP_SEARCH_SCOPE= one
NS_LDAP_SEARCH_TIME= 30
NS_LDAP_SERVER_PREF= X.A.B.C, Y.A.B.C
NS_LDAP_CACHETTL= 43200
NS_LDAP_PROFILE= tls_profile
NS_LDAP_CREDENTIAL_LEVEL= proxy
NS_LDAP_SERVICE_SEARCH_DESC= passwd:ou=People,dc=A,dc=B,dc=com?one
NS_LDAP_SERVICE_SEARCH_DESC= group:ou=People,dc=A,dc=B,dc=C?one
NS_LDAP_SERVICE_SEARCH_DESC= shadow:ou=People,dc=A,dc=B,dc=C?one
NS_LDAP_BIND_TIME= 10
bash-2.05# cat /var/ldap/ldap_client_cred
# Do not edit this file manually; your changes will be lost.Please use ldapclient (1M) instead.
NS_LDAP_BINDDN= cn=proxyagent,ou=profile,dc=A,dc=B,dc=C
NS_LDAP_BINDPASSWD= {NS1}6ff7353e346f87a7
bash-2.05# cat /etc/nsswitch.conf
# /etc/nsswitch.ldap:
# An example file that could be copied over to /etc/nsswitch.conf; it
# uses LDAP in conjunction with files.
# "hosts:" and "services:" in this file are used only if the
# /etc/netconfig file has a "-" for nametoaddr_libs of "inet" transports.
# the following two lines obviate the "+" entry in /etc/passwd and /etc/group.
passwd: files ldap
group: files ldap
# consult /etc "files" only if ldap is down.
hosts: files dns
ipnodes: files
# Uncomment the following line and comment out the above to resolve
# both IPv4 and IPv6 addresses from the ipnodes databases. Note that
# IPv4 addresses are searched in all of the ipnodes databases before
# searching the hosts databases. Before turning this option on, consult
# the Network Administration Guide for more details on using IPv6.
#ipnodes: ldap [NOTFOUND=return] files
networks: files
protocols: files
rpc: files
ethers: files
netmasks: files
bootparams: files
publickey: files
netgroup: ldap
automount: files ldap
aliases: files ldap
# for efficient getservbyname() avoid ldap
services: files ldap
sendmailvars: files
printers: user files ldap
auth_attr: files ldap
prof_attr: files ldap
project: files ldap
bash-2.05# cat /etc/pam.conf
#ident "@(#)pam.conf 1.20 02/01/23 SMI"
# Copyright 1996-2002 Sun Microsystems, Inc. All rights reserved.
# Use is subject to license terms.
# PAM configuration
# Unless explicitly defined, all services use the modules
# defined in the "other" section.
# Modules are defined with relative pathnames, i.e., they are
# relative to /usr/lib/security/$ISA. Absolute path names, as
# present in this file in previous releases are still acceptable.
# Authentication management
# login service (explicit because of pam_dial_auth)
login auth requisite pam_authtok_get.so.1 debug
login auth required pam_dhkeys.so.1 debug
login auth required pam_dial_auth.so.1 debug
login auth binding pam_unix_auth.so.1 server_policy debug
login auth required pam_ldap.so.1 use_first_pass debug
# rlogin service (explicit because of pam_rhost_auth)
rlogin auth sufficient pam_rhosts_auth.so.1
rlogin auth requisite pam_authtok_get.so.1
rlogin auth required pam_dhkeys.so.1
rlogin auth binding pam_unix_auth.so.1 server_policy
rlogin auth required pam_ldap.so.1 use_first_pass
# rsh service (explicit because of pam_rhost_auth,
# and pam_unix_auth for meaningful pam_setcred)
rsh auth sufficient pam_rhosts_auth.so.1
rsh auth required pam_unix_auth.so.1
# PPP service (explicit because of pam_dial_auth)
ppp auth requisite pam_authtok_get.so.1
ppp auth required pam_dhkeys.so.1
ppp auth required pam_dial_auth.so.1
ppp auth binding pam_unix_auth.so.1 server_policy
ppp auth required pam_ldap.so.1 use_first_pass
# Default definitions for Authentication management
# Used when service name is not explicitly mentioned for authenctication
other auth requisite pam_authtok_get.so.1 debug
other auth required pam_dhkeys.so.1 debug
other auth binding pam_unix_auth.so.1 server_policy debug
other auth required pam_ldap.so.1 use_first_pass debug
# passwd command (explicit because of a different authentication module)
passwd auth binding pam_passwd_auth.so.1 server_policy debug
passwd auth required pam_ldap.so.1 use_first_pass debug
# cron service (explicit because of non-usage of pam_roles.so.1)
cron account required pam_projects.so.1
cron account required pam_unix_account.so.1
# Default definition for Account management
# Used when service name is not explicitly mentioned for account management
other account requisite pam_roles.so.1 debug
other account required pam_projects.so.1 debug
other account binding pam_unix_account.so.1 server_policy debug
other account required pam_ldap.so.1 no_pass debug
# Default definition for Session management
# Used when service name is not explicitly mentioned for session management
other session required pam_unix_session.so.1
# Default definition for Password management
# Used when service name is not explicitly mentioned for password management
other password required pam_dhkeys.so.1 debug
other password requisite pam_authtok_get.so.1 debug
other password requisite pam_authtok_check.so.1 debug
other password required pam_authtok_store.so.1 server_policy debug
# Support for Kerberos V5 authentication (uncomment to use Kerberos)
#rlogin auth optional pam_krb5.so.1 try_first_pass
#login auth optional pam_krb5.so.1 try_first_pass
#other auth optional pam_krb5.so.1 try_first_pass
#cron account optional pam_krb5.so.1
#other account optional pam_krb5.so.1
#other session optional pam_krb5.so.1
#other password optional pam_krb5.so.1 try_first_pass
I can ssh into client with user VV which does not exist locally but exists in the directory server. This is from /var/adm/messages on the ldap client):
May 17 15:25:07 client sshd[26956]: [ID 634615 auth.debug] pam_authtok_get:pam_sm_authenticate: flags = 0
May 17 15:25:11 client sshd[26956]: [ID 896952 auth.debug] pam_unix_auth: entering pam_sm_authenticate()
May 17 15:25:11 client sshd[26956]: [ID 285619 auth.debug] ldap pam_sm_authenticate(sshd VV), flags = 0
May 17 15:25:11 client sshd[26956]: [ID 509786 auth.debug] roles pam_sm_authenticate, service = sshd user = VV ruser = not set rhost = h.A.B.C
May 17 15:25:11 client sshd[26956]: [ID 579461 auth.debug] pam_unix_account: entering pam_sm_acct_mgmt()
May 17 15:25:11 client sshd[26956]: [ID 724664 auth.debug] pam_ldap pam_sm_acct_mgmt: illegal option no_pass
May 17 15:25:11 client sshd[26956]: [ID 100510 auth.debug] ldap pam_sm_acct_mgmt(VV), flags = 0
May 17 15:25:11 client sshd[26953]: [ID 800047 auth.info] Accepted keyboard-interactive/pam for VV from 10.115.1.251 port 2703 ssh2
May 17 15:25:11 client sshd[26953]: [ID 914923 auth.debug] pam_dhkeys: no valid mechs found. Trying AUTH_DES.
May 17 15:25:11 client sshd[26953]: [ID 499478 auth.debug] pam_dhkeys: get_and_set_seckey: could not get secret key for keytype 192-0
May 17 15:25:11 client sshd[26953]: [ID 507889 auth.debug] pam_dhkeys: mech key totals:
May 17 15:25:11 client sshd[26953]: [ID 991756 auth.debug] pam_dhkeys: 0 valid mechanism(s)
May 17 15:25:11 client sshd[26953]: [ID 898160 auth.debug] pam_dhkeys: 0 secret key(s) retrieved
May 17 15:25:11 client sshd[26953]: [ID 403608 auth.debug] pam_dhkeys: 0 passwd decrypt successes
May 17 15:25:11 client sshd[26953]: [ID 327308 auth.debug] pam_dhkeys: 0 secret key(s) set
May 17 15:25:11 client sshd[26958]: [ID 965073 auth.debug] pam_dhkeys: cred reinit/refresh ignored
If I try to then change the password with the `passwd` command it does not use the password policy on the directory server but the default defined in /etc/default/passwd
bash-2.05$ passwd
passwd: Changing password for VV
Enter existing login password:
New Password:
passwd: Password too short - must be at least 8 characters.
Please try again
May 17 15:26:17 client passwd[27014]: [ID 285619 user.debug] ldap pam_sm_authenticate(passwd VV), flags = 0
May 17 15:26:17 client passwd[27014]: [ID 509786 user.debug] roles pam_sm_authenticate, service = passwd user = VV ruser = not set rhost = not set
May 17 15:26:17 client passwd[27014]: [ID 579461 user.debug] pam_unix_account: entering pam_sm_acct_mgmt()
May 17 15:26:17 client passwd[27014]: [ID 724664 user.debug] pam_ldap pam_sm_acct_mgmt: illegal option no_pass
May 17 15:26:17 client passwd[27014]: [ID 100510 user.debug] ldap pam_sm_acct_mgmt(VV), flags = 80000000
May 17 15:26:17 client passwd[27014]: [ID 985558 user.debug] pam_dhkeys: entered pam_sm_chauthtok()
May 17 15:26:17 client passwd[27014]: [ID 988707 user.debug] read_authtok: Copied AUTHTOK to OLDAUTHTOK
May 17 15:26:20 client passwd[27014]: [ID 558286 user.debug] pam_authtok_check: pam_sm_chauthok called
May 17 15:26:20 client passwd[27014]: [ID 271931 user.debug] pam_authtok_check: minimum length from /etc/default/passwd: 8
May 17 15:26:20 client passwd[27014]: [ID 985558 user.debug] pam_dhkeys: entered pam_sm_chauthtok()
May 17 15:26:20 client passwd[27014]: [ID 417489 user.debug] pam_dhkeys: OLDRPCPASS already set
I am using the default policy on the directory server which states a minimum password length of 6 characters.
server:root:LDAP_Master:/var/opt/SUNWdsee/dscc6/dcc/ads/ldif#dsconf get-server-prop -h server -p 389|grep ^pwd-
pwd-accept-hashed-pwd-enabled : N/A
pwd-check-enabled : off
pwd-compat-mode : DS6-mode
pwd-expire-no-warning-enabled : on
pwd-expire-warning-delay : 1d
pwd-failure-count-interval : 10m
pwd-grace-login-limit : disabled
pwd-keep-last-auth-time-enabled : off
pwd-lockout-duration : disabled
pwd-lockout-enabled : off
pwd-lockout-repl-priority-enabled : on
pwd-max-age : disabled
pwd-max-failure-count : 3
pwd-max-history-count : disabled
pwd-min-age : disabled
pwd-min-length : 6
pwd-mod-gen-length : 6
pwd-must-change-enabled : off
pwd-root-dn-bypass-enabled : off
pwd-safe-modify-enabled : off
pwd-storage-scheme : CRYPT
pwd-strong-check-dictionary-path : /opt/SUNWdsee/ds6/plugins/words-english-big.txt
pwd-strong-check-enabled : off
pwd-strong-check-require-charset : lower
pwd-strong-check-require-charset : upper
pwd-strong-check-require-charset : digit
pwd-strong-check-require-charset : special
pwd-supported-storage-scheme : CRYPT
pwd-supported-storage-scheme : SHA
pwd-supported-storage-scheme : SSHA
pwd-supported-storage-scheme : NS-MTA-MD5
pwd-supported-storage-scheme : CLEAR
pwd-user-change-enabled : off
Whereas /etc/default/passwd on the ldap client says passwords must be 8 characters. This is seen with the pam_authtok_check: minimum length from /etc/default/passwd: 8
. It is clearly not using the policy from the directory server but checking locally. So I can login ok using the ldap server for authentication but when I try to change the password it does not use the policy from the server which says I only need a minimum lenght of 6 characters.
I have read that pam_ldap is only supported for directory server 5.2. Because I am running ds6 and with password compatability in ds6 mode maybe this is my problem. Does anyone know of any updated pam_ldap modules for solaris 9?
Edited by: ericduggan on Sep 8, 2008 5:30 AM

you can try passwd -r ldap for changing the ldap passwds...

Mail does not use correct outgoing server

Problem
Mail in Mavericks (and also IOS6 snf 7) does not use the outgoing smtp server associated with the account being used. This results in either a failure to send or mail being put into the wrong "Sent" folder.
Background
I have most of my non-icloud mail pulled down to a home server from which my laptops and ios devices access various accounts using imap. The local home server also provides smtp and relays all mail to my ISP. Recently I have been switching from an old home server (Mac Mini) to a new one (Raspberry pi running the debian Raspbian version with fetchmail, Dovecot and postfix setup).
While making the changeover I had access to both the old server and the new server enabled on my laptop. Naturally the majority of the settings (Name, email address etc) were the same although the name and address of the server to be used for both incoming and outgoing mail were different. This seemed tp work fine for incoming. However when I tested outgoing mail the copy that should appear in the "sentt" box went missing. This usually indicates some mistake in the setting of the sent mail folder on the accounts but this all checked out.
I eventually found the missing outgoing mail intended to go through the new server in the sent box on the old server. Further trials showed that no matter what I did the outgoing would always default to the old (and therefore first set up) outgoing server.
Deleting the old account and the old outgoing server of course should cure the problem and will eventually be the solution for me when I kill the old server. But i wanted to get to the bottom of the problem in case it reappeared in other contexts. Checking the "use only this server" box produced failure to send rather than the correct result.
Trialing various alterntaive settings showed that the problem occurs when there are two outgoing servers with the email address in the settings and the user name on the outgoing server name being the same. I had assumed that changing the description field would distinguish between the various settings; however this did not work. Changing the Name Field did work eg by putting (O) after my name.
It appears therefore that mail selects the outgoing server on the basis of email address (with the full name included) and user name (trrespective of the actual server or the Description that shows in the smtp server listing. In some ways this is logical but it produces problems in the context I have described and would also be a difficulty if you wanted to use an alternative server when in a different location.
I have trawled support and elsewhere for any thing similar. Lots of mail problems (don't get me started on the way icloud loses outgoing each time you edit the list!) but I have not found any posts on precisiely this point.
IOS devices seem to have similar problems, but a quick attempt at a similar solution does not work, and I cannot be bothered to test the options. I will simply clean them out and put in the new accounts.
Advice
Grateful for any comments or advice from people who have encountered similar problems and whether my diagnosis if correct. Have I missed any obvious corrections that would clear this up. I do not know whether this is a Mavericks issue or also appears in earlier OSX versions.
CPE

Peter,
Where ever the Sent and Trash folders show in the Sidebar, highlight first one, and then the other, followed by clicking on Mailbox in the Menubar, and choosing Use This Mailbox For, and choose the function.
Keep us posted on your progress.
Ernie

My table of contents does not use the entry style I select for words in the paragraph that have character styles applied to them in the chapter, so some of the letters are showing up as green, which is fine in the chapter but not in the TOC.

My table of contents does not use the entry style I select for words in the paragraph that have character styles applied to them in the chapter, so some of the letters, specifically parameters, are showing up green, which is fine in the chapter but not in the TOC. I can manually fix this in the TOC by changing the character style to none after the toc has been generated, but I don't want to do this.

What application are you running? Please ask this in the forum of the product you're using.

My website is telling users to install a flash/shockwave plug in but my site does not use either.

Like I said in the title we are getting the pop up bar asking users to install a flash plug in but there are not any flash objects on our site. I did an experiment and I found when I disable the shockwave plug-in on a machine that has it installed I get the pop-up and when I enable it on a machine that has it installed the pop-up goes away. I think I might have pin pointed the problem to a tracking script because when I remove the script the website does not ask for a plug-in. I contacted the people who made the script and they told me their script does not use flash in anyway. Does anyone have any idea why our useres are being asked to install the plug-in?
Here is the pop-up:

Do you have any advertising on the site that could be using shockwave? If not the script you mention must somehow be using it somehow, you have even confirmed this removing it and there is no prompt.
What happens if you try it using another browser such as Firefox?
regards
Mike

[svn:fx-trunk] 16929: Add a [Mixin] class that will register the required class aliases in the event the mxml compiler generation   [RemoteClass(alias="")] code is not called because an application does not use the Flex UI framework .

Revision: 16929
Revision: 16929
Author:   [email protected]
Date:     2010-07-15 07:38:44 -0700 (Thu, 15 Jul 2010)
Log Message:
Add a class that will register the required class aliases in the event the mxml compiler generation [RemoteClass(alias="")] code is not called because an application does not use the Flex UI framework.
Add a reference to this class in the RPCClasses file so it always gets loaded.
QE notes: Need a remoting and messaging regression test that doesn't use Flex UI.
Bugs: Watson bug 2638788
Modified Paths:
    flex/sdk/trunk/frameworks/projects/rpc/src/RPCClasses.as
Added Paths:
    flex/sdk/trunk/frameworks/projects/rpc/src/mx/utils/RpcClassAliasInitializer.as

Great exercise to document the problem like this. It got me thinking about how an app with modules would be different from an app that does not use modules. Solution: I moved the dummy reference of PersonPhotoView out to the main application file (as opposed to being inside the module) and it worked. I've probably been lucky not to have experienced this problem earlier, because for most other entities I have an instance attached to my model which is linked / compiled with the main application.

Set a colour to a row in a table view which does not use an iterator

Hi ,
I have an application , which displays data using a table view.
How can i set colour to a row based on the value of one of its coloums.
The table view does not use an itertator.
Thanks
Arun

you can use the following code in the ONMANIPULATION event to modify the color of the row. but be aware that if SAP changes rendering ot htmlb:tableview it may not work.
this code sample set the bgcolor of row 2 to blue.
DATA: httpbody TYPE string .
CALL METHOD response->if_http_entity~get_cdata
RECEIVING
data = httpbody.
REPLACE ALL OCCURRENCES OF '<tr rr="2"' IN httpbody WITH '<tr rr="2" bgcolor="blue"' IGNORING CASE .
CALL METHOD response->if_http_entity~set_cdata
EXPORTING
data = httpbody.
Regards
Raja

A tech company just set up a wifi network in my house and does not use my existing TC; how do I get it in the network to serve as backup for my iMac? (I don't need it as a wifi access point anymore)

a tech company just set up a wifi network in my house and does not use my existing TC; how do I get it in the network to serve as backup for my iMac? (I don't need it as a wifi access point anymore) thanks

Just bridge the TC and plug it by ethernet into the main router.
Bridge in v5 airport utility.
In v6 it is under network.. change it from DHCP and NAT to Off bridge mode.
Turn off the wireless.

Oracle 10.2.0.3 does not use hugepages..

Similar Messages

Maybe you are looking for