Oracle 10.2.0.4 patch upgrade

Hi,
We have recently upgraded oralce 10.2.0.2 to 10.2.0.4 we downloaed the Oracle patches as per snote # 871735 for SUN aparc 64 bit .
We have used OUI and done the upgrade as per the instaructions in the readme file of the patch.
I have observed in Snote #1137346 that after upgrading to 10.2.0.4 apply the pacthes as per snotes #1137346.
Environment:
R/3 4.6c and BW 7.0
OS : Sun sparc 5.9 64 bit
DB : Oracle 10.2.0.4
Please suggest does applying the oracle patches as per snote # 871735 is enough or we have to go as per#1137346 also....
Thanks,
Subhash.G

> We have recently upgraded oralce 10.2.0.2 to 10.2.0.4 we downloaed the Oracle patches as per snote # 871735 for SUN aparc 64 bit .
> We have used OUI and done the upgrade as per the instaructions in the readme file of the patch.
Ok.
> I have observed in Snote #1137346 that after upgrading to 10.2.0.4 apply the pacthes as per snotes #1137346.
> Please suggest does applying the oracle patches as per snote # 871735 is enough or we have to go as per#1137346 also....
Yes - you also have to apply all the interim patches too. You updated your database only to 10.2.0.4; this version has also bugs which are fixed byy applying all the patches of note 1137346.
Markus

Similar Messages

System Core Dumped after Oracle patch upgrade 9.2.0.6 to 9.2.0.8

Hi,
We are continously getting dumps on our BW Central instance server after we did an Oracle patch upgrade from 9.2.0.6 to 9.2.0.8.
Following is our system environment
SAP Release.............. "640"
Application server....... "abci"
Operating system......... "SunOS"
Release.................. "5.10"
Hardware type............ "sun4v"
Database server.......... "abdb"
Database type............ "ORACLE"
Database name............ "ABP"
Database owner........... "SAPABP"
SAP kernel............... "640"
Database version......... "OCI_920 "
Patch level.............. "175"
Following below is the Core Dump that is generated for any process chains that we schedule on our BW server
Runtime Errors         SYSTEM_CORE_DUMPED
Date and Time          14.04.2008 09:26:17
ShrtText
     Process terminated by signal 11.
What happened?
    The current ABAP program had to be terminated because the
    ABAP processor detected an internal system error.
    The current ABAP program "SAPMSSY2" had to be terminated because the ABAP
    processor discovered an invalid system state.
What can you do?
    Make a note of the actions and input which caused the error.
    To resolve the problem, contact your SAP system administrator.
    You can use transaction ST22 (ABAP Dump Analysis) to view and administer
    termination messages, especially those beyond their normal deletion
    date.
Error analysis
    An SAP System process was terminated by an operating system signal.
    Possible reasons for this are:
    1. Internal SAP System error.
    2. Process was terminated externally (by the system administrator).
               Last error logged in SAP kernel
    Component............ "Taskhandler"
    Place................ "SAP-Server awci_ABP_00 on host awci (wp 5)"
    Version.............. 1
    Error code........... 11
    Error text........... "ThSigHandler: signal"
    Description.......... " "
    System call.......... " "
    Module............... "thxxhead.c"
    Line................. 9780
How to correct the error
    The SAP System work directory (e.g. /usr/sap/c11/D00/work ) often
    contains a file called 'core'.
    Save this file under another name.
    If you cannot solve the problem yourself and you wish to send
    an error message to SAP, include the following documents:
    1. A printout of the problem description (short dump)
       To obtain this, select in the current display "System->List->
       Save->Local File (unconverted)".
    2. A suitable printout of the system log
       To obtain this, call the system log through transaction SM21.
       Limit the time interval to 10 minutes before and 5 minutes
       after the short dump. In the display, then select the function
       "System->List->Save->Local File (unconverted)".
    3. If the programs are your own programs or modified SAP programs,
       supply the source code.
       To do this, select the Editor function "Further Utilities->
       Upload/Download->Download".
    4. Details regarding the conditions under which the error occurred
       or which actions and input led to the error.
Kindly help.
Regards
Sachin
Edited by: Sachin N on Apr 14, 2008 12:26 PM

No. If the environment would be wrong the system wouldn´t start up.
Core dumps are in 99 % of the cases program errors (in the SAP kernel or in an interface (libdbora*)), misaligend accesses of data etc.
If you encounter such an error have a look in the C-Stack. If you can´t see where the error is happening opening an OSS call. Most of those errors are fixed by installing the latest patches for the kernel and the database interface.
Markus

Multiple accounts on the same resource in Oracle Waveset 8.1.1 patch 5

Hi IDM Experts!
I've customized my userforms in order to create multiple accounts on the same resource using the syntax accounts[<resourceName>|n].<attribute> like the documentation suggests. That worked fine using Sun Identity Manager 8.1.
However, I've not been able to create new multiple accounts after I upgraded to Oracle Waveset 8.1.1 patch 5.
Is there anything else that I have to take into account for this new version? Is that a bug?
Thanks in advance for your help!

Thanks for the reply... in my case this would be done by the active synch process so no GUI form is required. I will be getting a list of application ID for the user by LDAP AS. One i get it i will have to parse it and get the list of application user id. I am passing those ID;s to a workflow where I am forming the resource name as you mentioned
for example:
If i get user1#user2#user3 from AS i am separating them based on # using split and getting 3 different user id;s
now i am forming a string with the resource name and passing it to the sub process in which i am checking out the user object, setting the user attributes and checking in the new view.
user1#LDAP
user2#LDAP|1
user3#LDAP|2
Problem ; When i run this user1 is getting created in LDAP but user2 and user3 are not. There entry is getting created in IDM.
When I open the IDM object I get a yellow triangle (warning) and if I open the user object and hit save button IDM creates the user account on the LDAP.
any help for further solving this problem would be appreciated.
Regards,

Oracle 10.2.0.2 Patch for HPIA64

Dear all,
I have installed Oracle 10.2.0.1 and now I need to upgrade it to 10.2.0.2 and then apply some interim patches.
I have checked the market place but there is no Oracle 10.2.0.2 Patch DVD avaible.
I am to find only for AIX, Window & Solaris.
     51031725_1   Oracle 10.2.0.2.0 Patch for AIX 64bit
CD
000002     51031725_2   Oracle 10.2.0.2.0 Patch for Windows IA64, I386, X86_64
CD
000003     51031725_3   Oracle 10.2.0.2.0 Patch for Solaris 64bit
Can anyone pl help
Regards
Senthil

Thanks all for your reply.
ya! I can find it in the database patches link.
All I have to do is download the *.bin files and then resume it to a *.zip file and then use the same.
Note 509314 - Downloading Oracle patches from SAP Service Marketplace
Markus,
I tried searching the dvd number, which you have given me, but I am not able to see that. Thanks
Thanks all

10.2.0.2 Patch Upgrade issue

hi,
SAP was installed on 10.2.0.1 (SuSe Linux Ent 10 ) . now i am applying patch upgrade to 10.2.0.2. when i am doing patch the below problem was occured,
"Unable to create new central inventory at location /oracle/orainventory. A non empty inventory already exists at this location. Please select another location or clean the inventory at /oracle/orainventory."
please help me on this issue
Regards
Ramesh

Hai,
Please check the oraInst.loc file has the correct entry or not.
File oraInst.loc should have the entries similar to the below:
inventory_loc=/oracle/SID/oraInventory
inst_group=dba
Check the permissions of this file as well, atleast the file should have read access to others.
Also check the permissions of /oracle/SID/oraInventory, it should be owned by ora<sid> user and group dba.
Regards,
Yoganand.V
Edited by: Yoganand Vedagiri on Feb 23, 2009 12:05 PM

Patch / Upgrade

Hello,
I was looking into patching/upgrading from 10.2.0.3 to a 10.2.0.5 verison.
Are the two zip files for 10.2.0.5 from http://www.oracle.com/technology/ "Patch Installers"
The same as Patches from Metalink ?
Please explain the difference.
Thanks..

Hello,
I found out they would be the same. I was looking for more of a general answer not specfic to a product like what is "Patch Installers"
The two zip files I want are for 10.2.0.5 from http://www.oracle.com/technology/software/products/oem/index.html "Patch Installers"
are the same as Patch 3731593 from Metalink.
I thought the patch would only be from Metalink.
Thanks..

Backup error after kernel patch upgrade

Hi.
I have a backup problem after the kernel patch upgrade. I have SAP R3 4.6C on HPUX11.0 with an Oracle 8.17 database.
I have upgraded kernel patch from 1655 to 2337.
Afterward, I am getting following backup error:
BR280I Time stamp 2007-11-06 09.29.01
BR279E Return code from '/usr/sap/HAD/SYS/exe/run/backint -u HAD -f backup -i /oracle/HAD/sapbackup/.bdwnpztp.lst -t file_online -c': 2
BR232E 0 of 115 files saved by backup utility
BR280I Time stamp 2007-11-06 09.29.01
BR231E Backup utility call failed
Does anyone know how to correct this?
Thank you.

Hi Jun,
backint is a link file that is in SAP kernel directory which links to the backup client on the server.
eg:
lrwxrwxrwx 1 root other 32 Aug 13 2004 backint -> /usr/openv/netbackup/bin/backint
As part of kernel upgrade process, the kernel is backed up, mostly on the disk before upgrading. Check if this link exists and recreate it in the kernel directory, if no backup was done, compare it with other systems to get the details of the backint link.
Cheers,
Nisch

After patch upgrade in 11g Not able to see current patch

Hi Experts,
After upgrading the patch upgrade through MOPatch from 11.2.0.2.0 to 11.2.0.2.4 , I can see the log as succeeded .
But when I am connecting through sqlplus / as sysdba the version is still showing as 11.2.0.2.0 . Have I missed something I used the readme file README_201111_AIX which is downloaded with this patch.
I have to also add one more fix_control after patch upgrade that means system is reading the right patch. So, Please suggest how to check this .
Thanks in Advance.

Hi,
My output is :-
Oracle Database 11g                                                  11.2.0.2.0
There are 1 products installed in this Oracle Home.
and also I can see the following that today these much patches installed successfully I am giving some example below :-
Patch 10149919     : applied on Thu Dec 08 05:22:25 EST 2011
Unique Patch ID: 14146533
   Created on 3 Oct 2011, 00:42:46 hrs PST8PDT
   Bugs fixed:
     10149919
   This patch overlays patches:
     12827726
   This patch needs patches:
     12827726
   as prerequisites
Patch 10188865     : applied on Thu Dec 08 05:22:11 EST 2011
Unique Patch ID: 13551988
   Created on 21 Mar 2011, 03:16:39 hrs PST8PDT
   Bugs fixed:
     10188865
Patch 10190759     : applied on Thu Dec 08 05:21:56 EST 2011
Unique Patch ID: 13109839
   Created on 11 Nov 2010, 20:29:55 hrs UTC
   Bugs fixed:
     10190759
Patch 10243045     : applied on Thu Dec 08 05:21:45 EST 2011
Unique Patch ID: 13169052
   Created on 23 Nov 2010, 02:40:01 hrs PST8PDT
   Bugs fixed:
     10243045
Patch 10357961     : applied on Thu Dec 08 05:21:38 EST 2011
Unique Patch ID: 13814186
   Created on 6 Jun 2011, 06:16:52 hrs PST8PDT
   Bugs fixed:
     10357961
But if the patches applied is 11.2.0.2.0 will not change to 11.2.0.2.4 or it will only change after applying patchset.
Thanks in advance.

Repository connect issue after MDM Patch Upgrade

MDM Expert
We recently upgraded our MDM patch from SP06 5.5.63.73 to SP06 5.5.65.91
after patch upgrade we are not able to connect to repository.SAP is saying that we have wong NLS Character set.It should be 'UTF8' or 'AL32UTF8'
We checked and found that we do not have character set as per SAP Recommendation but everything was working fine before upgrading the patch.As per SAP in new Patch MDM is lokking for Unicode Character set
SAP is asking to create new DB Instance for MDM.
If we create new instance for MDM then how we are going to use our existing repository.Our environment is clustered environment and name of MDM DB instance is also mentioned in cluster.We have to use same Instance name.We are also using oracle failsafe
Creating new instance seems to be risky for Production environment.Currently we are applying the Patch in Sandbox Environment
has anyone of you faced this problem while upgrading MDM patch, if yes then how you resolve the issue
Please help
Thanks
Deelip

Solution provided by sAP

Patch upgrade on IDM

Dear All,
I've been looking for a couple of days to properly patch my IDM systems.
At the moment we are running on 7.20 SP9 p0 and I would like to apply the IDENT. CENTER DESIGNTIME 7.2 patch 6.
However till now I never have found any documentation or guide to properly patch IDM.
We already applied a few patches when we were running 7.20 SP8 but I would like to verify if the way we are using is the correct one.
Has anyone ever seen this kind of doc ?
Thx,
Laurent

Hello Laurent,
You can do so but that doesnt make any difference if you were using Copy of SAP Provisioning framework.
By chance if you have made changes in your SAP Standard provisioning framework then I would recommmend to copy it before upgrading so you need not to do export import of your old framework and continue using with new updated scripts.
In case you want to perform Patch upgrade, then below are the steps I used to follow :
1.Make sure the system is backed up based on your current backup procedures
2.Stop all dispatchers and event agents
3.Uninstall the old DESIGNTIME and RUNTIME components (Not always required to uninstall, you can simple install the latest component and those should upgrade)
4.From the new version folder locate the database folder and select your database type (SQLServer/Oracle/DB2
5.Run the appropriate upgrade script (check the Database specific PDF file for
information on customization and detailed procedure) You'll probably need to engage your DBAs on this as well.
6.Install the new DESIGNTIME and RUNTIME components
7.Verify the new version is installed through the MMC Console (you should notice the change in version on the splash screen and then when you go into look at the ID Store
8.Restart your dispatchers and event agents
Regards
Deepak Gupta

Kernel Patch upgrade results into error

Recently, we upgraded our R/3 640 kernel from patch number 196 to 327. It went successful.
But now, the Sales and order team is having problem in saving the orders(VA02, VA01).
While saving Sales order, error pops up saying "dialog step number missing".
Kindly suggest.

Hi ppl,
The problem has been resolved.
As i said, problem wasnt with the upgrade, but came thereafter, functional team faced issues while switching between the windows.
Problem was with the Gui level, it needed to be upgraded too after the kernel patch upgrade.
Thanks a lot for putting your thoughts.
Thanks

Oracle SQL Developer 1.1 Patch 2 (1.1.2.25.79) Browsing

Dear All
I download Oracle SQL Developer 1.1 Patch 2 (1.1.2.25.79) ,and install it but
it refuse to browse any schema , knowing that it accept the connection and keep the massage loading appearing all the time
Thanks
Suliman

More detailed output below (Ctrl+break and running as sqldeveloper -J-Dide.extension.log.to.console=true)
I've also only got Oracle.* files in my two extensions directories
C:\Program Files\SQLDeveloper\ide\extensions
C:\Program Files\SQLDeveloper\jdev\extensions
C:\Program Files\SQLDeveloper\sqldeveloper\bin>sqldeveloper.exe
WARNING: Unknown directive: SetSkipJ2SDKCheck
Using oracle.home=C:\Program Files\SQLDeveloper
Using ide.user.dir=null
Full thread dump Java HotSpot(TM) Client VM (1.5.0_06-b05 mixed mode):
"TimerQueue" daemon prio=6 tid=0x04635270 nid=0xff4 in Object.wait() [0x04d3f000
..0x04d3fd68]
at java.lang.Object.wait(Native Method)
- waiting on <0x12879928> (a javax.swing.TimerQueue)
at javax.swing.TimerQueue.run(TimerQueue.java:233)
- locked <0x12879928> (a javax.swing.TimerQueue)
at java.lang.Thread.run(Thread.java:595)
"AWT-EventQueue-0" prio=6 tid=0x04610e50 nid=0xf50 in Object.wait() [0x04c3f000.
.0x04c3f9e8]
at java.lang.Object.wait(Native Method)
- waiting on <0x12832040> (a java.awt.EventQueue)
at java.lang.Object.wait(Object.java:474)
at java.awt.EventQueue.getNextEvent(EventQueue.java:345)
- locked <0x12832040> (a java.awt.EventQueue)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchTh
read.java:189)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThre
ad.java:163)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
"Image Fetcher 0" daemon prio=8 tid=0x04611160 nid=0x234 in Object.wait() [0x04b
3f000..0x04b3fa68]
at java.lang.Object.wait(Native Method)
- waiting on <0x12860f78> (a java.util.Vector)
at sun.awt.image.ImageFetcher.nextImage(ImageFetcher.java:114)
- locked <0x12860f78> (a java.util.Vector)
at sun.awt.image.ImageFetcher.fetchloop(ImageFetcher.java:167)
at sun.awt.image.ImageFetcher.run(ImageFetcher.java:136)
"AWT-Windows" daemon prio=6 tid=0x045fbd28 nid=0xb7c runnable [0x04a2f000..0x04a
2fae8]
at sun.awt.windows.WToolkit.eventLoop(Native Method)
at sun.awt.windows.WToolkit.run(WToolkit.java:269)
at java.lang.Thread.run(Thread.java:595)
"AWT-Shutdown" prio=6 tid=0x045fb8b0 nid=0xe4c in Object.wait() [0x0492f000..0x0
492fb68]
at java.lang.Object.wait(Native Method)
- waiting on <0x128345c8> (a java.lang.Object)
at java.lang.Object.wait(Object.java:474)
at sun.awt.AWTAutoShutdown.run(AWTAutoShutdown.java:259)
- locked <0x128345c8> (a java.lang.Object)
at java.lang.Thread.run(Thread.java:595)
"Java2D Disposer" daemon prio=6 tid=0x044de4a8 nid=0x688 in Object.wait() [0x048
2f000..0x0482fbe8]
at java.lang.Object.wait(Native Method)
- waiting on <0x12834650> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:116)
- locked <0x12834650> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:132)
at sun.java2d.Disposer.run(Disposer.java:107)
at java.lang.Thread.run(Thread.java:595)
"Low Memory Detector" daemon prio=6 tid=0x01015278 nid=0x90c runnable [0x0000000
0..0x00000000]
"CompilerThread0" daemon prio=6 tid=0x01012d38 nid=0xed0 waiting on condition [0
x00000000..0x03e6fa4c]
"Signal Dispatcher" daemon prio=6 tid=0x010120b8 nid=0x7dc waiting on condition
[0x00000000..0x00000000]
"Finalizer" daemon prio=8 tid=0x01008fd0 nid=0xd28 in Object.wait() [0x03c6f000.
.0x03c6fae8]
at java.lang.Object.wait(Native Method)
- waiting on <0x1279ffa0> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:116)
- locked <0x1279ffa0> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:132)
at java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:159)
"Reference Handler" daemon prio=6 tid=0x01008518 nid=0x624 in Object.wait() [0x0
3b6f000..0x03b6fa68]
at java.lang.Object.wait(Native Method)
- waiting on <0x127a0020> (a java.lang.ref.Reference$Lock)
at java.lang.Object.wait(Object.java:474)
at java.lang.ref.Reference$ReferenceHandler.run(Reference.java:116)
- locked <0x127a0020> (a java.lang.ref.Reference$Lock)
"main" prio=6 tid=0x00849390 nid=0xf4c runnable [0x0012d000..0x0012fb78]
at java.lang.Throwable.fillInStackTrace(Native Method)
at java.lang.Throwable.<init>(Throwable.java:218)
at java.lang.Exception.<init>(Exception.java:59)
at java.lang.ClassNotFoundException.<init>(ClassNotFoundException.java:6
5)
at java.lang.ClassLoader.findBootstrapClass(Native Method)
at java.lang.ClassLoader.findBootstrapClass0(ClassLoader.java:891)
at java.lang.ClassLoader.loadClass(ClassLoader.java:301)
- locked <0x127a2fd0> (a sun.misc.Launcher$ExtClassLoader)
at java.lang.ClassLoader.loadClass(ClassLoader.java:299)
- locked <0x127a0058> (a sun.misc.Launcher$AppClassLoader)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:268)
- locked <0x127a0058> (a sun.misc.Launcher$AppClassLoader)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at oracle.classloader.SearchPolicy$FindMain.getClass(SearchPolicy.java:3
07)
at oracle.classloader.SearchSequence.getClass(SearchSequence.java:119)
at oracle.classloader.SearchPolicy.loadClass(SearchPolicy.java:648)
- locked <0x127af080> (a oracle.classloader.PolicyClassLoader)
at oracle.classloader.PolicyClassLoader.askParentForClass(PolicyClassLoa
der.java:1308)
at oracle.classloader.SearchPolicy$AskParent.getClass(SearchPolicy.java:
68)
at oracle.classloader.SearchSequence.getClass(SearchSequence.java:119)
at oracle.classloader.PolicyClassLoader.internalLoadClass(PolicyClassLoa
der.java:1693)
- locked <0x127adf48> (a oracle.classloader.PolicyClassLoader)
at oracle.classloader.PolicyClassLoader.loadClass(PolicyClassLoader.java
:1654)
at oracle.classloader.PolicyClassLoader.loadClass(PolicyClassLoader.java
:1639)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
- locked <0x127adf48> (a oracle.classloader.PolicyClassLoader)
at javax.ide.model.spi.DocumentHook.$init$(DocumentHook.java:66)
at javax.ide.model.spi.DocumentHook.<init>(DocumentHook.java:27)
at javax.ide.extension.spi.DefaultHookVisitorFactory.createDocumentHook(
DefaultHookVisitorFactory.java:157)
at javax.ide.extension.spi.DefaultHookVisitorFactory.registerStandardVis
itors(DefaultHookVisitorFactory.java:81)
at javax.ide.extension.spi.DefaultHookVisitorFactory.<init>(DefaultHookV
isitorFactory.java:53)
at oracle.ideimpl.extension.ExtensionManagerImpl$1.<init>(ExtensionManag
erImpl.java:153)
at oracle.ideimpl.extension.ExtensionManagerImpl.createHookVisitorFactor
y(ExtensionManagerImpl.java:152)
at javax.ide.extension.ExtensionRegistry.loadExtensions(ExtensionRegistr
y.java:259)
at oracle.ideimpl.extension.ExtensionManagerImpl.loadExtensions(Extensio
nManagerImpl.java:376)
at javax.ide.extension.ExtensionRegistry.loadExtensions(ExtensionRegistr
y.java:171)
at javax.ide.extension.ExtensionRegistry.initialize(ExtensionRegistry.ja
va:382)
at oracle.ideimpl.extension.ExtensionManagerImpl.initialize(ExtensionMan
agerImpl.java:875)
at javax.ide.Service.getService(Service.java:68)
at javax.ide.extension.ExtensionRegistry.getExtensionRegistry(ExtensionR
egistry.java:401)
at oracle.ide.ExtensionRegistry.getOracleRegistry(ExtensionRegistry.java
:140)
at oracle.ide.IdeCore.startupImpl(IdeCore.java:1122)
at oracle.ide.Ide.startup(Ide.java:642)
at oracle.ideimpl.DefaultIdeStarter.startIde(DefaultIdeStarter.java:35)
at oracle.ideimpl.Main.start(Main.java:90)
at oracle.ideimpl.Main.main(Main.java:51)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at oracle.ide.boot.PCLMain.callMain(PCLMain.java:45)
at oracle.ide.boot.PCLMain.main(PCLMain.java:37)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at oracle.classloader.util.MainClass.invoke(MainClass.java:89)
at oracle.ide.boot.IdeLauncher.bootClassLoadersAndMain(IdeLauncher.java:
218)
at oracle.ide.boot.IdeLauncher.launchImpl(IdeLauncher.java:90)
at oracle.ide.boot.IdeLauncher.launch(IdeLauncher.java:66)
at oracle.ide.boot.IdeLauncher.main(IdeLauncher.java:55)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at oracle.ide.boot.Launcher.invokeMain(Launcher.java:508)
at oracle.ide.boot.Launcher.launchImpl(Launcher.java:106)
at oracle.ide.boot.Launcher.launch(Launcher.java:60)
at oracle.ide.boot.Launcher.main(Launcher.java:49)
"VM Thread" prio=6 tid=0x010058e0 nid=0xde8 runnable
"VM Periodic Task Thread" prio=6 tid=0x01011ff8 nid=0xeb8 waiting on condition
Product extension oracle.sqldeveloper could not be loaded. The product cannot st
art.
Disabled extensions:
oracle.ide.xmlef: Missing dependencies: oracle.ide.daf, oracle.ide.palette2
C:\Program Files\SQLDeveloper\sqldeveloper\bin>sqldeveloper -J-Dide.extension.lo
g.to.console=true
WARNING: Unknown directive: SetSkipJ2SDKCheck
Using oracle.home=C:\Program Files\SQLDeveloper
Using ide.user.dir=null
Product extension oracle.sqldeveloper could not be loaded. The product cannot st
art.
Disabled extensions:
oracle.ide.xmlef: Missing dependencies: oracle.ide.daf, oracle.ide.palette2
C:\Program Files\SQLDeveloper\sqldeveloper\bin>

How to do patch upgradation in citrix server ?

Dear all,
How to do patch upgradation in citrix server (SAP B1 2005B PL41 to PL49) ?
Whether i also need to do same in db server ?
Jeyakanthan

Hi Jayakanthan,
Patch Upgrade is done on SAP Server only.After Completion of Patch 49 upgrade in SAP Server
then open SAP B1 in server machine it start to upgrade DB after completed DB Upgrade
In Citrix Server open the SAP B1 it start the upgrade process after completed
restart the citrix server.
There is no separate Patch instalation in citrix server.
in Citrix server SAP client only installed so you can just open the
SAP B1 in citrix server and other client machine also it automatically start to
upgrade.
*Close the thread if issue solved.
Regards
Jambulingam.P

Unable to donwload Oracle SQL Developer 2.1 Patch 1 - getting a 404

Hi,
I'm trying to download Oracle SQL Developer 2.1 Patch 1, but I'm getting a 404.
Here is the page I'm downloading from:
http://www.oracle.com/technology/software/products/sql/index.html
Here is the link to the zip file:
http://download.oracle.com/otn/java/sqldeveloper/sqldeveloper-2.1.1.64.45-no-jre.zip
Could anyone point me to a working link?

I have just been to the site and downloaded the software. This is is always available and certainly not been down for 40 days, we track the daily downloads. You maybe restricted by a firewall setting on your side which does not permit you to download the software. There are occasions when there are issues, but generally if you try again in an hour they're resolved. We will not put the software on a rapid share site and for anyone else to do so would be violating licensing restrictions and is as such not legal.
Sue Harper
Product Manager

Best Practice: SAPGUI Version and Patch Upgrades

Hello -
Does anyone have some thoughts/information on best practices relating to SAPGUI version and patch upgrades.
Obviously, sometimes upgrades are forced upon us (e.g. 7.10 for Vista) and in other cases it may just be considered "nice to have".
Either way - it always signifies regression test and deployment effort. How do we balance the benefit and cost?
Thanks, Steve

Hi Steve,
you're right for the first part, yes, we (usually) patch twice a year.
Now for the rest
An uninstall will only happen on release changes (6.20->6.40->7.10), i. e. about every 4-5 years as SAP releases them.
Patches are applied to the installation server and the setup on the client will only update changed program parts. For example, upgrading 6.40->7.10 took about 10 minutes (incl. uninstall), applying patch 1 less than 5 minutes.
I recommend, you read the "SAP Frontend Installation Guide - 7.10" which you find at SMP alias sapgui. Navigate to Media Library - Literature. It explains setup of the installation server (sounds like a big thing, but ain't much more than creating a share), creating packages, applying updates etc.
Peter
Points always appreciated

Oracle 10.2.0.4 patch upgrade

Similar Messages

Maybe you are looking for