Oracle 10.2.0.4 with OFS 3.3.4 - MSCS -Failsafe Manager

Hi,
Prior to our production upgrade of Oracle 9.2.0.6 to 10.2.0.4 for SAP 4.7 / Windows / Itanium (IA64), I had been trying a trial "Oracle only" upgrade with MSCS in virtual server environment. Added complexity is a Standby Database.
I have reproduced the scenario in Virtual Server, with Oracle only (no SAP) - two node cluter + standby database.
After I upgraded the system, based on SAP document, when I use OFS Manager to add database to the cluster, the FS manager hangs at the stage "Checking whether database GEO is online" and remains there for hours. I have exactly performed the steps provided by SAP for the upgrade.
Any specific issue I am overlooking?
Regds
Murali

We installed OFS 3.3.4 on Oracle 10.2.0.2. All of cluster, group and standalone database verification are passed. There is warning to state that Oracle Management Agent not installed. We asked SAP support they answered that can be ignored. When we run add database to group, we always got failure at the last step to bringup database on the available node. The OS event log shown ORA-010301 insufficient privillege. The OFS dumped messages shown
FS-10382: SPLMIPCAX64 : Bringing resource MIP.WORLD online
ERROR : FS-10726: Resource MIP.WORLD is in a failed state
ERROR : FS-10012: Failed to bring the cluster resource MIP.WORLD online. Check the Windows event log for messages
ERROR : FS-10782: The Oracle Database resource provider failed to bring resource MIP.WORLD online
ERROR : FS-10890: Oracle Services for MSCS failed during the add operation
ERROR : FS-10497: Starting clusterwide rollback of the operation
FS-10488: Starting rollback of operation.
We guess it may be listener IP and port issue. We try to assign the oracle virtual IP with port 1527 to nodes on both side, and two individual IP with port 1521 for each node, but the problem can not be solved.
We need help. Hope anybody has idea to be in light on the issue. We appreciate very much.
Paul

Similar Messages

Oracle IAS 10 install questions with ebs 11.5.10.2

We have a 11.5.10.2 installation that was installed a few years back
Our environment is
our small server hosts the forms server and the web server
our big server hosts admin node, concurrent manager and database
both of our above servers have IAS_ORACLE_HOME version 4
we have to upgrade this IAS_ORACLE_HOME to version 10
we are following the documents below
233436.1 Installing Oracle Application Server 10g with Oracle E-Business Suite Release 11i [ID 233436.1]
261914.1 Integrating Oracle E-Business Suite Release 11i with Oracle Internet Directory and Oracle Single Sign-On [ID 261914.1]
313418.1 Using Oracle Discoverer 10.1.2 with Oracle E-Business Suite Release 11i
a) Do we need to configure IAS_ORACLE_HOME on both the above servers ?
It seems that Apps server 10g requires a separate Oracle Instance to store
the metadata repository as mentioned below
The Oracle Application Server 10g Infrastructure must not be
installed in the Oracle E-Business Suite Release 11i database.
For more details, see Oracle MetaLink Note 251627.1,
"Installing an Oracle Application Server Metadata Repository
with an Oracle E-Business Suite Database."
So in case we need to install IAS_ORACLE_HOME on both servers do we need
to create two instances for the Application Server Metadata Repository
or do we have an option ?
Thanks for helping

Guys ,
Check out the following link
http://www.oracle.com/technology/software/products/ias/htdocs/101202.html
Check out the section called Business intelligence
if you expand the + sign it shows
Included:
* Oracle Business Intelligence Discoverer
* Oracle HTTP Server
* Oracle Application Server Containers for J2EE (OC4J)
* Oracle Enterprise Manager 10g Application Server Control
* Oracle Application Server Web Cache
* Oracle Application Server Reports Services
Since I have Suse Enterprise Linux 9 and I do not have a server available
which I can use exclusively
I cannot choose the version 11 of BIS since it required SLES 10
Hence I have chosen the linux version of the BIS
the files for linux
as_linux_x86_bi_101202_disk1.cpio
as_linux_x86_bi_101202_disk2.cpio
Read
document 313418.1 section 1.3 and also the NOTE in the next section
The document 313418.1 1.3 NOTE section clearly states that if we need only Discoverer plus and Discoverer Viewer I can install the bi components as I explained above.
Hussein has guided me .....check the messages in this same thread above.
Thanks a lot Hussein
Edited by: r_g_financials_dba on Jul 14, 2010 9:22 AM
Edited by: r_g_financials_dba on Jul 14, 2010 9:26 AM

Why Oracle 8i is not Working with JDK 1.3

Why Oracle 8i is not Working with JDK 1.3 by using JDBC.

try this
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Connection con = DriverManager.getConnection("jdbc:odbc:"somedsn","scott","tiger");
I am using this for Oracle, it is working for me.
Uma
Java Developer
http://www.globalleafs.com

How to migrate Oracle 9i(32 bit) to oracle 10g(64 bit) DB with ASM

How to migrate Oracle 9i(32 bit) to oracle 10g(64 bit) DB with ASM on SAME platform RHEL4.0
Scenario My case:
1) DB size 400G.
2) Minimum downtime.
3) oracle 9i(9.2.0.4) source DB.
4) oracle 10g(10.2.0.3) target DB with ASM.
5) Source DB (HOST A) and target DB (HOST B) Machine.
Thanks
Ashutosh

I think Werner is suggesting you ask your question in the appropriate forum.
Go up 2 levels (to Community Discussion Forum) and look for the Database category. It's not that difficult to find, and you will be discussing the question with people who actually care about that kind of question.
The people who read and interact in this forum do so to discuss Documentation questions. Specifically questions about how to improve the documentaiton.

Oracle reports problem in distribution with xml file

Hi ,
I am having problem while I am trying to distribute the file with specifing the destination details in the xml. If I am giving the destination details in url then it is working.
Ex.
This is Working
http://bryxh91:8889/reports/rwservlet?report=devlopersuit/reports/test.jsp&userid=anju/[email protected]&desformat=pdf&destype=file&desname=devlopersuit/reports/output_file.pdf
Not working :
http://bryxh91:8889/reports/rwservlet?report=devlopersuit/reports/test.jsp&userid=anju/[email protected]&DISTRIBUTE=YES&destination=devlopersuit/reports/dis_test.xml
xml file
<destinations>
<file id="test" name="output_file.pdf" format="pdf">
<include scr="mainSection"/>
</file>
</destinations>
Error : REP-34304: Distribution failed to complete; review the distribution lists
Its been week I tried many things , but not working.
Right now I am trying to distribute to single file but my goal is to burst and distribute on basis of account number.
This is the first stage of the project.
Thanks a lot for the help
Anju

Hello
see answer in Oracle reports problem in distribution with xml file
Regards

CONNECTING ORACLE 9I OR 10G DATABASE WITH ORACLE 10G FORMS AND REPORTS

pls tell how to connect oracle 9i or 10g database with oracle developer suite 10g . though the forms are getting connected but not running with error as
FRM-10142 the HTTP listner is not running on pls start the listner or check your runtime preferences.
now pls tell how to start listner and how to chage runtime preferences.
though i have worked with oracle 9i and forms 6i where we used to copy the tnsnames.ora from network/admin of oracle to forms 6i tnsnames.ora.
thank you, you may be thinking such a long question.....

sir
By server i mean the computer where oc4j and backend database are running is one one of the client pc not a dedicated server..., these database and 10g dev suite are installed in one of the client machine,
all the clients are using same internet explorer as browser.
no message is being displyed on some of the client machine where these forms are not being uploaded on browser instead it displays as done in status bar without actually showing anything at all...
sir so far as jinitiator or JRE is concered i have seen on the client machine (where my forms are running on internet explorer) a pop up is displyed telling one activex control is required to run this program and click to install it..
after clicking it download jinitiator from server and after installing jinitiator my forms are loaded and start functioning...
what i feel is as i said this machine where oc4j and database is running is one of the client machine so some other clients do not have acess to this machine, so this might be the reason why those clints are not able to run the said forms on the internet explorer.... can it be so... kindly tell..
thank you for your patience for reading the question

How to invoke crystal reports from Oracle forms 11g R2 along with passing p

How to invoke crystal reports from Oracle forms 11g R2 along with passing parameter to it.
how to pass parameters to crystal report, please help.

how to pass parameters to crystal report, please help.This would entirely depend on crystal reports and you might find informations on crystal reports related communities more likely...I for one have seen crystal reports the last time about 12 years ago. And even back then I simply acknowledged it's existence instead of working with it.
Maybe crystal reports can be invoked via a URL call which would make it simple as you'd need simply build an URL and show the report using web.show_document. But that's pure speculation. Also you might not be the first with this requirement, so the solution to your problem might be right under your nose and just a little google search away ;)
cheers

Oracle 8i array DML operations with LOB objects

Hi all,
I have a question about Oracle 8i array DML operations with LOB objects, both CLOB and BLOB. With the following statement in mind:
INSERT INTO TABLEX (COL1, COL2) VALUES (:1, :2)
where COL1 is a NUMBER and COL2 is a BLOB, I want to use OCIs array DML functionality to insert multiple records with a single statement execution. I have allocated an array of LOB locators, initialized them with OCIDescriptorAlloc(), and bound them to COL2 where mode is set to OCI_DATA_AT_EXEC and dty (IN) is set to SQLT_BLOB. It is after this where I am getting confused.
To send the LOB data, I have tried using the user-defined callback method, registering the callback function via OCIBindDynamic(). I initialize icbfps arguments as I would if I were dealing with RAW/LONG RAW data. When execution passes from the callback function, I encounter a memory exception within an Oracle dll. Where dvoid **indpp equals 0 and the object is of type RAW/LONG RAW, the function works fine. Is this not a valid methodology for CLOB/BLOB objects?
Next, I tried performing piecewise INSERTs using OCIStmtGetPieceInfo() and OCIStmtSetPieceInfo(). When using this method, I use OCILobWrite() along with a user-defined callback designed for LOBs to send LOB data to the database. Here everything works fine until I exit the user-defined LOB write callback function where an OCI_INVALID_HANDLE error is encountered. I understand that both OCILobWrite() and OCIStmtExecute() return OCI_NEED_DATA. And it does seem to me that the two statements work separately rather than in conjunction with each other. So I rather doubt this is the proper methodology.
As you can see, the correct method has evaded me. I have looked through the OCI LOB samples, but have not found any code that helps answer my question. Oracles OCI documentation has not been of much help either. So if anyone could offer some insight I would greatly appreciate it.
Chris Simms
[email protected]
null

Before 9i, you will have to first insert empty locators using EMPTY_CLOB() inlined in the SQL and using RETURNING clause to return the locator. Then use OCILobWrite to write to the locators in a streamed fashion.
From 9i, you can actually bind a long buffer to each lob position without first inserting an empty locator, retrieving it and then writing to it.
<BLOCKQUOTE><font size="1" face="Verdana, Arial, Helvetica">quote:</font><HR>Originally posted by CSimms:
Hi all,
I have a question about Oracle 8i array DML operations with LOB objects, both CLOB and BLOB. With the following statement in mind:
INSERT INTO TABLEX (COL1, COL2) VALUES (:1, :2)
where COL1 is a NUMBER and COL2 is a BLOB, I want to use OCIs array DML functionality to insert multiple records with a single statement execution. I have allocated an array of LOB locators, initialized them with OCIDescriptorAlloc(), and bound them to COL2 where mode is set to OCI_DATA_AT_EXEC and dty (IN) is set to SQLT_BLOB. It is after this where I am getting confused.
To send the LOB data, I have tried using the user-defined callback method, registering the callback function via OCIBindDynamic(). I initialize icbfps arguments as I would if I were dealing with RAW/LONG RAW data. When execution passes from the callback function, I encounter a memory exception within an Oracle dll. Where dvoid **indpp equals 0 and the object is of type RAW/LONG RAW, the function works fine. Is this not a valid methodology for CLOB/BLOB objects?
Next, I tried performing piecewise INSERTs using OCIStmtGetPieceInfo() and OCIStmtSetPieceInfo(). When using this method, I use OCILobWrite() along with a user-defined callback designed for LOBs to send LOB data to the database. Here everything works fine until I exit the user-defined LOB write callback function where an OCI_INVALID_HANDLE error is encountered. I understand that both OCILobWrite() and OCIStmtExecute() return OCI_NEED_DATA. And it does seem to me that the two statements work separately rather than in conjunction with each other. So I rather doubt this is the proper methodology.
As you can see, the correct method has evaded me. I have looked through the OCI LOB samples, but have not found any code that helps answer my question. Oracles OCI documentation has not been of much help either. So if anyone could offer some insight I would greatly appreciate it.
Chris Simms
[email protected]
<HR></BLOCKQUOTE>
null

Oracle 10.2.0.3 with Developer 2000 (Form/Report 6i)

Hi Experts
we are using Oracle 9i database and Developer 2000(6i) Last few years. Now I want to replace 9i database with Oracle 10.2.0.3 , in this scenario can Oracle database 10.2 will work with 6i form/report.
what I did. I installed Oracle 10g (10.2) and Developer 2000(6i) on Windows XP and restored data backup. on this machine software working. Now I want to ask how can I run this software on Clients (Windows XP).
My past practice was I used to installed oracle 9i database client with Developer 2000.
now in current scenario what Should I do. because there is no any client installation available on Oracle database 10.2.
how to manage connection client with server (windows Xp).

now in current scenario what Should I do. because there is no any client installation available on Oracle database 10.2.Well First ORACLE 10g Database will work with developer 2000 , But to get oracle client software you have to Raise SR On http://support.oracle.com
Otherwise
You need to upgrade to 11.2.0.2 as i think its not supported with developer 2000 , So you have to upgrade the whole Environment Forms/reports 10g and Database 11g

Integrating Active directory with oracle EBS 12.1.3 with 11g R2 database

Hi,
can any one let me know Integrating Active directory windows 2009 R2 with oracle EBS 12.1.3 with 11g R2 database software requirements and document ids for integrating.
Is windows 2008 active directory is cerfied with 10g OID??
regards,
chandrasekhar.

Hi
I found exact note
Is OID 10g/11g DIP Compatible / Certified With Microsoft Active Directory 2008 / Windows 2008 R1/R2? [ID 944298.1]
From note:
DIP 10g latest version (10.1.4.3) and DIP 11g up to PS4 / 11.1.1.5 Patchset releases integrations are certified with MS AD 2008 R1 only.
DIP 11g certification with AD 2008 R2 is supported only with DIP 11g PS5 / 11.1.1.6 Patchset or higher.
Note: Although DIP below 11.1.1.6 integration (synchronization, external authentication, etc.) with MS Windows / AD 2008 R2 may work, it is not officially compatible / certified. See also Note 1076018.1.
Regard
Helios

Can I Use Oracle DB 11g Express Edition with Atomikos Transactions.

Hi,
Any Help is appreciated.
Im able to use Oracle 11g Standard/Enterprise Edition with Atomikos for XA transactions.(XADMS).
My question is Can I Use Oracle DB 11g Express Edition with Atomikos for XA Transactions.
Thanks,
kensuser

Hi,
Thanks for the answer.What jdbc drivers should I use. Because still Im getting exception when using Oracle 11g XE.
But the same application runs with Oracle 11g Standard/Enterprise Edition.
Here is my Exception trace: Sorry, I'm a first time user, so pasting the exception as it is, will find out how to format the same, as use this forum. ant help is appreciated. Thanks in Advance
SEVERE: Exception sending context initialized event to listener instance of class org.springframework.web.context.ContextLoaderListener
org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'UIToolAdminkit': Invocation of init method failed; nested exception is com.atomikos.datasource.ResourceException: XA resource 'EXXADBMS': resume for XID '3139322E3136382E35352E31382E746D30303030313030313937:3139322E3136382E35352E31382E746D31' raised -3: the XA resource detected an internal error
     at org.springframework.beans.factory.annotation.InitDestroyAnnotationBeanPostProcessor.postProcessBeforeInitialization(InitDestroyAnnotationBeanPostProcessor.java:135)
     at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.applyBeanPostProcessorsBeforeInitialization(AbstractAutowireCapableBeanFactory.java:393)
     at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.initializeBean(AbstractAutowireCapableBeanFactory.java:1437)
     at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:518)
     at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:455)
     at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:294)
     at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:225)
     at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:291)
     at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:193)
     at org.springframework.beans.factory.support.DefaultListableBeanFactory.preInstantiateSingletons(DefaultListableBeanFactory.java:585)
     at org.springframework.context.support.AbstractApplicationContext.finishBeanFactoryInitialization(AbstractApplicationContext.java:913)
     at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:464)
     at org.springframework.web.context.ContextLoader.configureAndRefreshWebApplicationContext(ContextLoader.java:381)
     at org.springframework.web.context.ContextLoader.initWebApplicationContext(ContextLoader.java:283)
     at org.springframework.web.context.ContextLoaderListener.contextInitialized(ContextLoaderListener.java:111)
     at org.apache.catalina.core.StandardContext.listenerStart(StandardContext.java:4206)
     at org.apache.catalina.core.StandardContext.start(StandardContext.java:4705)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1057)
     at org.apache.catalina.core.StandardHost.start(StandardHost.java:840)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1057)
     at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:463)
     at org.apache.catalina.core.StandardService.start(StandardService.java:525)
     at org.apache.catalina.core.StandardServer.start(StandardServer.java:754)
     at org.apache.catalina.startup.Catalina.start(Catalina.java:595)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:289)
     at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:414)
Caused by: com.atomikos.datasource.ResourceException: XA resource 'EXXADBMS': resume for XID '3139322E3136382E35352E31382E746D30303030313030313937:3139322E3136382E35352E31382E746D31' raised -3: the XA resource detected an internal error
     at com.atomikos.datasource.xa.XAResourceTransaction.resume(XAResourceTransaction.java:500)
     at com.atomikos.datasource.xa.session.BranchEnlistedStateHandler.<init>(BranchEnlistedStateHandler.java:57)
     at com.atomikos.datasource.xa.session.NotInBranchStateHandler.checkEnlistBeforeUse(NotInBranchStateHandler.java:66)
     at com.atomikos.datasource.xa.session.TransactionContext.checkEnlistBeforeUse(TransactionContext.java:85)
     at com.atomikos.datasource.xa.session.SessionHandleState.notifyBeforeUse(SessionHandleState.java:176)
     at com.atomikos.jdbc.AtomikosConnectionProxy.enlist(AtomikosConnectionProxy.java:204)
     at com.atomikos.jdbc.AtomikosConnectionProxy.invoke(AtomikosConnectionProxy.java:138)
     at $Proxy13.prepareStatement(Unknown Source)
     at org.hibernate.jdbc.AbstractBatcher.getPreparedStatement(AbstractBatcher.java:534)
     at org.hibernate.jdbc.AbstractBatcher.getPreparedStatement(AbstractBatcher.java:452)
     at org.hibernate.jdbc.AbstractBatcher.prepareQueryStatement(AbstractBatcher.java:161)
     at org.hibernate.loader.Loader.prepareQueryStatement(Loader.java:1573)
     at org.hibernate.loader.Loader.doQuery(Loader.java:696)
     at org.hibernate.loader.Loader.doQueryAndInitializeNonLazyCollections(Loader.java:259)
     at org.hibernate.loader.Loader.doList(Loader.java:2228)
     at org.hibernate.loader.Loader.listIgnoreQueryCache(Loader.java:2125)
     at org.hibernate.loader.Loader.list(Loader.java:2120)
     at org.hibernate.hql.classic.QueryTranslatorImpl.list(QueryTranslatorImpl.java:935)
     at org.hibernate.engine.query.HQLQueryPlan.performList(HQLQueryPlan.java:196)
     at org.hibernate.impl.SessionImpl.list(SessionImpl.java:1148)
     at org.hibernate.impl.QueryImpl.list(QueryImpl.java:102)
     at org.springframework.orm.hibernate3.HibernateTemplate$30.doInHibernate(HibernateTemplate.java:921)
     at org.springframework.orm.hibernate3.HibernateTemplate$30.doInHibernate(HibernateTemplate.java:1)
     at org.springframework.orm.hibernate3.HibernateTemplate.doExecute(HibernateTemplate.java:406)
     at org.springframework.orm.hibernate3.HibernateTemplate.executeWithNativeSession(HibernateTemplate.java:374)
     at org.springframework.orm.hibernate3.HibernateTemplate.find(HibernateTemplate.java:912)
     at org.springframework.orm.hibernate3.HibernateTemplate.find(HibernateTemplate.java:904)
     at com.kensho.common.UIbundlDAOImpl.findAll(UIbundlDAOImpl.java:13)
     at com.kensho.common.UIbundlDAOImpl$$FastClassByCGLIB$$6f2db14b.invoke(<generated>)
     at net.sf.cglib.proxy.MethodProxy.invoke(MethodProxy.java:191)
     at org.springframework.aop.framework.Cglib2AopProxy$CglibMethodInvocation.invokeJoinpoint(Cglib2AopProxy.java:689)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:150)
     at org.springframework.transaction.interceptor.TransactionInterceptor.invoke(TransactionInterceptor.java:110)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:172)
     at org.springframework.aop.framework.Cglib2AopProxy$DynamicAdvisedInterceptor.intercept(Cglib2AopProxy.java:622)
     at com.kensho.common.UIbundlDAOImpl$$EnhancerByCGLIB$$8797972a.findAll(<generated>)
     at com.kensho.common.UIToolKitAdminBBean.getAllBundleItems(UIToolKitAdminBBean.java:37)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at org.springframework.beans.factory.annotation.InitDestroyAnnotationBeanPostProcessor$LifecycleElement.invoke(InitDestroyAnnotationBeanPostProcessor.java:346)
     at org.springframework.beans.factory.annotation.InitDestroyAnnotationBeanPostProcessor$LifecycleMetadata.invokeInitMethods(InitDestroyAnnotationBeanPostProcessor.java:299)
     at org.springframework.beans.factory.annotation.InitDestroyAnnotationBeanPostProcessor.postProcessBeforeInitialization(InitDestroyAnnotationBeanPostProcessor.java:132)
     ... 29 more

Integrating Oracle Apex 4.0.2 with EBS R12.1.1

We could successfully integrate Oracle Apex 4.0.2 with EBS R12.1.1 with the help of http://www.oracle.com/technetwork/developer-tools/apex/apex-ebs-wp-cabot-consulting-169064.pdf.
The document says to navigate from EBS to Oracle Apex without any second login screen (works great!!), but now how do we navigate back to EBS from Oracle Apex (in same session) without any login screen again as like below
EBS User login --> EBS --> Oracle Apex --> EBS
Please help to achieve this.

Hi,
Under the Authentication scheme of your application in the Logout URL Section, give the following
wwv_flow_custom_auth_std.logout_then_go_to_url?p_args=&APP_ID.:http://xyz.ck.com:8010/OA_HTML/OA.jsp?OAFunc=OAHOMEPAGEspecify your ebiz suite url instead of http://xyz.ck.com:8010 in the above link.
so, that while pressing the Logout link in your apex, you wont be redirected to the ebiz login page again, and it will redirect to you ebiz menu home page back in the same session itself.
This will work for sure.
Good Luck!!!
Change your User handle from "805196" to a meaningful word.
Brgds,
Mini
If this answered your question, then award points and close the thread.

Which Oracle Certification Should I Start With

Hi,
I'm looking for some advice on which Oracle certification I should start with. Let me first tell you about me and my business goals. I an new to the SQL world but have a firm grasp of the RDBMS. I have also worked as a Business Analyst for a company that is doing an Oracle upgrade including the EBS. I have had to do some very basic queries. My business goal is to improve my Oracle database skills.
I would like to add Business (Data) Analyst to my job description some day. I would like to be both a Business Analyst and a Business Data Analyst. I have been asked to work as a jr. DBA in the past, and would like to continue to pursue those options. Currently, my work seems to evolve around Oracle as opposed to the other businesses out there.
Given this information, which certification would you recommend I start with. Please let me know if you require additional information. This is my long term business goal so I will take as much time as needed to get it done. I was thinking I should start with *1Z0-051 SQL Fundamentals I* (11g). Any thoughts?
Thank you in advance!
CRC_05

Hi;
I'm looking for some advice on which Oracle certification I should start with. Let me first tell you about me and my business goals. I an new to the SQL world but have a firm grasp of the RDBMS. I have also worked as a Business Analyst for a company that is doing an Oracle upgrade including the EBS. I have had to do some very basic queries. My business goal is to improve my Oracle database skills.
I would like to add Business (Data) Analyst to my job description some day. I would like to be both a Business Analyst and a Business Data Analyst. I have been asked to work as a jr. DBA in the past, and would like to continue to pursue those options. Currently, my work seems to evolve around Oracle as opposed to the other businesses out there.
Given this information, which certification would you recommend I start with. Please let me know if you require additional information. This is my long term business goal so I will take as much time as needed to get it done. I was thinking I should start with *1Z0-051 SQL Fundamentals I* (11g). Any thoughts?You could get this certificate as a first steps. If you want to be expert on dba subjects than you need to go OCA and OCP certification path.
If you get to Business Analyst than you can go wiht ebs certification
http://blogs.oracle.com/certification/2008/08/oracle_ebusiness_suite_r12_cer.html
But dont forget those subjects are different from eachother and need different skills to become senior on those subjects
Hope it helps
Regard
Helios

Oracle XE manulally creating daatbase with non-default charatcerset.

Hi
I would like to ask if creating the database manually using sql script with characterset EE8MSWIN1250 will violate the license agreement on Oracle XE 10. Normally the Oracle XE is distributed only with 2 preinstalled characterset version and there is no option for selecting the database characterset.
Thanks
Groxy

OracleXE

Oracle Options licensed 1:1 with Oracle Ent. Edition 11gR2 or by Instance?

Are Oracle Options licensed 1:1 with Oracle Ent. Edition 11gR2 (e.g. by CPU core multiplier) or by number of database instances on a host? In other words, if I need to purchase two Oracle Enterprise Edition licenses for a single host, do I need to purchase the same number of Oracle Option licenses (again, based on a CPU core multiplier). Or by the number of Oracle database instances installed on that host?
Anyone have a link to an official Oracle options licensing document that spells this out? Found one for 11g but it didn't get down into the weeds, saying if there was any difference between # of licenses required for an Option vs. a license for Oracle Enterprise Edition itself.
Requested Oracle option licensing reference

They are licensed 1:1 with EE, so 4 EE licenses means 4 Partitioning Option licenses, etc.
It is in the Oracle Store.
Sybrand Bakker
Senior Oracle DBA

Oracle 10.2.0.4 with OFS 3.3.4 - MSCS -Failsafe Manager

Similar Messages

Maybe you are looking for