Oracle 10g agent installation problem -- please advice. Thanks.

I am trying to push an agent from a 32-bit CentOS 4.5 machine (where I successfully installed EM Grid Control with Database & that's working fine) to a 2-node Oracle 10g Clusterware/RAC, each machine has 64-bit CentOS 4.5. The questions I have are:
1. Is this mixture of 32-bit/64-bit possible?
2. When I am performing agent install, everything seemed to work (with manual root.sh execution provision) but at the end it's giving a message
"Failure Preinstall Script Not Executed, Install Is Failed. Run root.sh Is Not Executed, PostInstall Script Is Not Executed. Collection Logs Is Success."
And I don't see any agent* directory anywhere in any of the intended RAC Cluster nodes -- also, no error message log!
Clusterware/RAC versin: 10.2.0.3
EM Grid Control: 10.2.0.1
I have no clue what are the meaning of these!
Can somebody please tell me how to fix it (no upgrade suggestion please)?
Thanks in advance.

Hi,
I noticed that you'd like to install OEM Agent for 32bit on 64-bit machine.
Please look at the link below.
http://www.oracle.com/technology/software/products/oem/htdocs/agentsoft.html#101x
Because OEM Agent on different platform are released separately.
eg.
For x86linux is Linux_Grid_Control_agent_download_10_2_0_2_0.zip
For Linux x86-64 is Linux_x86_64_Grid_Control_agent_download_10_2_0_2_0.zip
So could you please install OEM agent version for linx x86-64 ?
but I can not find OEM agent 10.2.0.1 version on link above. Do you have this version for 64-bit ?
Regards
Jason

Similar Messages

Oracle 10g Shared Server Problem Please Help

Hi
I am studying for Oracle 10g OCP ; I was trying to start the shared server feature of oracle10g ver 10.2.0.
The database name is :CERTIFICATION10g
The listener name is: LISTENER_CERTIFICATION10g Port:1521
I could register the dispatchers successully with the listener above. However when I open a new connection ; instead of going through the dispatcher it uses the dedicated connection. I tried opening many sessions but the established filed for both dispatchers remained 0
I post a dump of the lsnrctl services command below:
LSNRCTL> service listener_certification10g
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=einstein)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "certification10g" has 1 instance(s).
Instance "certification10g", status READY, has 3 handler(s) for this service..
Handler(s):
"DEDICATED" established:1 refused:0 state:ready
LOCAL SERVER
"D001" established:0 refused:0 current:0 max:1002 state:ready
DISPATCHER <machine: EINSTEIN, pid: 1428>
(ADDRESS=(PROTOCOL=tcp)(HOST=einstein)(PORT=1045))
"D000" established:0 refused:0 current:0 max:1002 state:ready
DISPATCHER <machine: EINSTEIN, pid: 1252>
(ADDRESS=(PROTOCOL=tcp)(HOST=einstein)(PORT=1044))
Service "certification10g_XPT" has 1 instance(s).
Instance "certification10g", status READY, has 3 handler(s) for this service..
Handler(s):
"DEDICATED" established:1 refused:0 state:ready
LOCAL SERVER
"D001" established:0 refused:0 current:0 max:1002 state:ready
DISPATCHER <machine: EINSTEIN, pid: 1428>
(ADDRESS=(PROTOCOL=tcp)(HOST=einstein)(PORT=1045))
"D000" established:0 refused:0 current:0 max:1002 state:ready
DISPATCHER <machine: EINSTEIN, pid: 1252>
(ADDRESS=(PROTOCOL=tcp)(HOST=einstein)(PORT=1044))
The command completed successfully
LSNRCTL>
Why are the connections not being routed through the dispatchers? Any additional setting needs to made?
Please reply asap
Thanls in Advance
Prahalad Deshpande

Maybe because you have in your listener.ora used by your client only this entry:
XXX =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = YYYY)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED) -> should be SHARED
(SERVICE_NAME = XXX)
(INSTANCE_NAME = XXXX)
(HS = OK)
)

Oracle 10g R2 installation problem in HP-UX Itanium 11.23 64 bit

platform desc:
HP-UX 64 bit Itanium 11.23
Oracle 10.2
I fulfill all the prerequisites (environment setup, kernel parameter update properly, user/group creation properly).
But while i'm starting the ./runInstaller then I got error which i cant define whats the problem.
{font:'Courier New'}{color:#4f81bd}$whoami{color}{font}
{font:'Courier New'}{color:#4f81bd} oracle
{color}{font}{font:'Courier New'}{color:#1f497d} {color}{font}
{font:'Courier New'}{color:#1f497d} {color}{font}
{font:'Courier New'}{color:#4f81bd}$ ./runInstaller{color}{font}
{font:'Courier New'}{color:#4f81bd}Starting Oracle Universal Installer...{color}{font}
{font:'Courier New'}{color:#4f81bd} {color}{font}
{font:'Courier New'}{color:#4f81bd}Checking installer requirements...{color}{font}
{font:'Courier New'}{color:#4f81bd} {color}{font}
{font:'Courier New'}{color:#4f81bd}Checking operating system version: must be B.11.23. Actual B.11.23{color}{font}
{font:'Courier New'}{color:#4f81bd} Passed{color}{font}
{font:'Courier New'}{color:#4f81bd} {color}{font}
{font:'Courier New'}{color:#4f81bd}Checking swap space: must be greater than 250 MB. Actual 4095 MB Passed{color}{font}
{font:'Courier New'}{color:#4f81bd}Checking Temp space: must be greater than 250 MB. Actual 2527 MB Passed{color}{font}
{font:'Courier New'}{color:#4f81bd} {color}{font}
{font:'Courier New'}{color:#4f81bd}All installer requirements met.{color}{font}
{font:'Courier New'}{color:#4f81bd} {color}{font}
{font:'Courier New'}{color:#4f81bd}Preparing
to launch Oracle Universal Installer from
/tmp/OraInstall2009-01-27_01-38-40PM. Please wait ...$ Unhandled signal
occurred at 0x60000000c7c66780{color}{font}
{font:'Courier New'}{color:#4f81bd}SIGSEGV 11* segmentation violation{color}{font}
{font:'Courier New'}{color:#4f81bd} si_signo [11]: SIGSEGV 11* segmentation violation{color}{font}
{font:'Courier New'}{color:#4f81bd} si_errno [0]: Error 0{color}{font}
{font:'Courier New'}{color:#4f81bd} si_code [2]: SEGV_ACCERR [addr: 0x0]{color}{font}
{font:'Courier New'}{color:#4f81bd} {color}{font}
{font:'Courier New'}{color:#4f81bd} {color}{font}
{font:'Courier New'}{color:#4f81bd}Aborting...{color}{font}
{font:'Courier New'}{color:#4f81bd} {color}{font}
{font:'Courier New'}{color:#4f81bd} {color}{font}
{font:'Courier New'}{color:#4f81bd}****************{color}{font}
{font:'Courier New'}{color:#4f81bd}Another exception has been detected while we were handling last error.{color}{font}
{font:'Courier New'}{color:#4f81bd}Dumping information about last error:{color}{font}
{font:'Courier New'}{color:#4f81bd}ERROR REPORT FILE = (N/A){color}{font}
{font:'Courier New'}{color:#4f81bd}PC = c7c66780{color}{font}
{font:'Courier New'}{color:#4f81bd}SIGNAL = 11{color}{font}
{font:'Courier New'}{color:#4f81bd}FUNCTION NAME = (N/A){color}{font}
{font:'Courier New'}{color:#4f81bd}OFFSET = 0xFFFFFFFF{color}{font}
{font:'Courier New'}{color:#4f81bd}LIBRARY NAME = (N/A){color}{font}
{font:'Courier New'}{color:#4f81bd}Please check ERROR REPORT FILE for further information, if there is any.{color}{font}
{font:'Courier New'}{color:#4f81bd}Good bye.{color}{font}
Pls help...
Shafiul.

A simple search on metalink....
Oracle Universal Installer Terminates with SIGSEGV 11* Segmentation Violation
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=155649.1
Note 43507.1 ALERT:HP-UX: Patch Levels Advised

Oracle 10g XE installation problem on Ubuntu Linux, Oracle will not start

Hi,
After installing the pakages the error is when I call sqlplus and login as SYS :-
oracleXE: error while loading shared libraries: libaio.so.1: cannot open shared object file: No such file or directory
ERROR:
ORA-12547: TNS:lost contact
What I have done:-
My system is 64 bit AMD.
I installed .deb package on Ubuntu 9.04 server. I installed the following packages.
1.     ibc6-i386
2.     libaio_0.3.104-1_i386.deb
3.     bc
4.     oracle-xe-universal_10.2.0.1-1.1_i386.deb.
The Oracle processes do not start after running /etc/init.d/oracle-xe start.
I can tnsping from the local machine.
dpkg -l |grep libaio gives the following:
ii libaio1 0.3.107-3ubuntu1 Linux kernel AIO access library - shared lib

I have been running XE on 9.04 (32bit on my laptop - 64bit on my workstation) and both works fine. I had no problem installing. I followed the directions in documents I found on Ubuntu forums and also google. The document I used to install on 64bit was from http://littlebrain.org
I remember using
dpkg -i --force-architecture libaio1_0.3.107-1ubuntu1_i386.deb
dpkg -i --force-architecture libaio-dev_0.3.107-1ubuntu1_i386.deb
dpkg -i --force-architecture libaio1-dbg_0.3.107-1ubuntu1_i386.deb
dpkg -i --force-architecture oracle-xe_10.2.0.1-1.0_i386.deb
and then I used the ./oracle-xe configure as root, the installation was ok - and I have even updated the APEX version to 3.2.1 on the XE installation running on my 64bit Ubuntu 9.04
hope this proves useful
R/ Zafer

Oracle 10g Database startup problem Please help

i am trying to start database but getting error;
SQL> startup
ORACLE instance started.
Total System Global Area 281018368 bytes
Fixed Size 788776 bytes
Variable Size 229373656 bytes
Database Buffers 50331648 bytes
Redo Buffers 524288 bytes
Database mounted.
ORA-16038: log 2 sequence# 44103 cannot be archived
ORA-19809: limit exceeded for recovery files
ORA-00312: online log 2 thread 1: 'D:\ORADATA\ASDB\REDO02.LOG'
Please guide and help
Thanks,
Waheed.

The error stack is interpreted as follows:
ORA-16038:     log string sequence# string cannot be archived
Cause:     An attempt was made to archive the named file, but the file could not be archived. Examine the secondary error messages to determine the cause of the error.
Action:     No action is required
ORA-19809:     limit exceeded for recovery files
Cause:     The limit for recovery files specified by the DB_RECOVERY_FILE_DEST_SIZE was exceeded.
Action:     The error is accompanied by 19804. See message 19804 for further details.
ORA-19804:     cannot reclaim string bytes disk space from string limit
Cause:     Oracle cannot reclaim disk space of specified bytes from the DB_RECOVERY_FILE_DEST_SIZE limit.
Action:     There are five possible solutions: 1) Take frequent backup of recovery area using RMAN. 2) Consider changing RMAN retention policy. 3) Consider changing RMAN archivelog deletion policy. 4) Add disk space and increase DB_RECOVERY_FILE_DEST_SIZE. 5) Delete files from recovery area using RMAN.
ORA-00312:     online log string thread string: 'string'
Cause:     This message reports the filename for details of another message.
Action:     Other messages will accompany this message. See the associated messages for the appropriate action to take.
DB_RECOVERY_FILE_DEST_SIZE specifies (in bytes) the hard limit on the total space to be used by target database recovery files created in the flash recovery area. You should increase this value.
On the other hand, out from the context I guessed it is a 10gRx database, but you should specify this on your thread, as well as specify os details.
~ Madrid

Oracle 10g R2 installation on sun solaris 10 Sparc machine

Hi there,
I encountered the following problem during oracle 10g R2 installation on sun solaris 10 Sparc machine
Error encountered:
Using paramFile: /u01/Oracle/10gr2_db_sol/install/oraparam.ini
Checking installer requirements...
Checking operating system version: must be 5.8, 5.9 or 5.10. Actual 5.10
Passed
Checking Temp space: must be greater than 250 MB. Actual 2266 MB Passed
Checking swap space: must be greater than 500 MB. Actual 2335 MB Passed
Checking monitor: must be configured to display at least 256 colors Failed <<<<
>>> Could not execute auto check for display colors using command /usr/openwin/bin/xdpyinfo. Check if the DISPLAY variable is set.
Some requirement checks failed. You must fulfill these requirements before
continuing with the installation,at which time they will be rechecked.
Continue? (y/n) [n]
The following were the steps taken before encountering the above error
1. logged into a workstation
2. From its xterm terminal I logged to the oracle server via ssh oracle@ip
3. keyed in the following at the command prompt
DISPLAY=machine_name:0.0; export DISPLAY
4. executed the following from the command prompt
./runInstaller
Note: when executing the ./runInstaller, the preinstallation checking just hangs at Checking monitor: must be configured to display at least 256 colors. But the log file shows it failed during preinstallation checking as shown in Error encountered
Please help me with this problem.
Thank you
Ravindran Kanniah

It is because of UNIX shell. I also faced this error during installation.
First check your shell by the following command.
$ echo $SHELL
Then select the below.
For csh shell
$ setenv DISPLAY 192.168.1.128:0.0
$ export DISPLAY
For sh,ksh and bash
$ DISPLAY=192.168.1.128:0.0
$ export DISPLAY
After you do this check the value of DISPLAY variable.
$ echo $DISPLAY
If the DISPLAY variable is set then run ./runInstaller.
One advice: Keep a complete log of your terminal session. This will help you in future :)
-aijaz

Where can I download the Oracle 10g Database Installer

where can I download the Oracle 10g Database Installer. I'm unable to find a link over the Oracle site. Please help me out on this one.

981705 wrote:
where can I download the Oracle 10g Database Installer. I'm unable to find a link over the Oracle site. Please help me out on this one.As mentioned above, you need to log a SR since 10g is not longer available for download -- https://forums.oracle.com/forums/search.jspa?threadID=&q=10g+AND+Download&objID=f36&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Oracle 10g R2 installation with ASM+RAC

Gurus,
Need some suggestuon on Oracle 10g R2 installation with ASM and RAC option.
We have found many documents on the Oracle, HP, HP-Oracle CTC and third party web sites, but nothing that is specific to this particular combination of separate
ORACLE_HOMEs, ASM and 10g RAC CRS. It is unclear for me from the documentation how this combination of ASM and 10.2g RAC may best be installed.
The high level steps i got after reading lot of docs as follows - but i am not sure whether these are correct or not. if they are correct, can any one share their experience/notes please?
1) Install CRS
2) Install RDBMS for ASM HOME - create separater oracle home for ASM instance using OUI
3) Install RDBMS for RAC Database Home - create separater oracle home for RAC database using OUI
4) Create ASM database using DBCA -
5) Use dbca to create database.

Oracle provides 'paint by numbers' tutorials called 'Oracle By Example'. (Go to OTN, check under the Training tab)
They have one for a Windows based ASM/RAC that you might want to review. Not your specific environment, but the steps will be dag-nabbed close.
I recommend walking the path (http://otn.oracle.com >> training:OBE >> Database 10g Release 1:VMWare:Installation
http://www.oracle.com/technology/obe/obe10gdb_vmware/install/racinstallwin2k/racinstallwin2k.htm

Oracle 10g client installation on OpenVMS 8.3 Itanium

I am trying to perform the installation of Oracle 10g client installation on OpenVMS 8.3 Itanium. I am getting the OUI (Oracle Universal Installer) window up and as soon as I click the "next" button it errors. The error is:
SEVERE: OUI-10207:There is not enough disk space on the OUI swap area /dsa50/temp/OraInstall2007-06-05_06-19-23PM. Please make at le
ast 9MB of space available and retry.
The disk for the oracle installation temp location and home location are in different directories on the same ODS-5 formated disk. The disk has approximately 251711296 free blocks.
The trace.log located in the <oracle_home> area shows the following:
in ssGetVolumeFreeSpace
in ssGetVolumeFreeSpace:before getFreeSpace:DSA50
Vol name is DSA50
Disk name is [.DSA50]
Disk=, Free blocks = 3362
in ssGetVolumeFreeSpace:after getFreeSpace:3362
returning from ssGetVolumeFreeSpace
The "temp" disk is DSA50.
Has anyone seen this issue with installation of the client on a large disk?
Are there any suggestions on what to do to correct this issue?

SEVERE: OUI-10207:There is not enough disk space. This error may be present at the Open VMS Itanium platform at it is due to bug 5981203 "OUI CALCULATES AVAILABLE DISK SPACE WRONG" and bug 5580279 "OUI FAILS WITH OUI-10207 ERROR". It is fixed in 10.2.0.3.0
As a workaround, use a logical diskname or the volume name and not the physical device name
~ Madrid

OS IP change after Oracle 10g DB Installation

I need to confirm what will be the effect if i change OS IP after Oracle Database Installation?
Please guide
Thanks,
Waheed.

When you change the IP address of the server, and you have used the hardcoded IP everywhere, you likely need to reconfigure the database control.
How to do this has been posted here many times, and of course it also documented.
Look for/search for emctl reconfigure.
Sybrand Bakker
Senior Oracle DBA

I bought my iPhone 5 almost an year ago and since the last 2 weeks my battery lasts about 2 hours or less, while before it lastre a whole day. Can anybody tell me why is this happening or how can i solve my problem, please? Thank you.

I bought my iPhone 5 almost an year ago and since the last 2 weeks my battery lasts about 2 hours or less, while before it lastre a whole day. Can anybody tell me why is this happening or how can i solve my problem, please? Thank you.

You can follow these steps to save battery.
1. Turn on Auto-Brightness - The iPhone has an ambient light sensor that adjusts the brightness of the screen based on the light around it (darker in dark places, brighter when there's more ambient light) to both save battery and make it easier to see. Turn Auto-Brightness on and you’ll save battery because your screen will need to use less power in dark places.
Find it in the Settings app -> Brightness & Wallpaper -> Auto-Brightness On
2. Reduce Screen Brightness -the brighter the default setting for the screen, the more battery it requires. Keep the screen dimmer to conserve more of your battery.
Find it in Settings -> Brightness & Wallpaper
3. Stop Motion (iOS 7) -It's really cool, but it also drains battery. You may want to leave it on to enjoy the effect, but if not, turn it off this way:
Settings -> General -> Accessibility -> Reduce Motion -> move slider to green/on
4. Turn Bluetooth Off- Turn off Bluetooth except when you’re using it to squeeze more juice from your battery.
Find it in Settings -> Bluetooth -> Move Slider to Off
5. Turn Off Location Services -
This allows your phone to know where you are and give you exact driving directions, give that information to apps that help you find restaurants, and more. But, like any service that sends data over a network, it needs battery power to work. If you’re not using Location Services, and don’t plan to right away, turn them off and save some power.
Find it in Settings -> Privacy -> Location Services -> Slide to Off
6. Don't Automatically Update Apps (iOS 7)-
If you've got iOS 7, you can forget needing to update your apps by hand. There's now a feature that automatically updates them for you when new versions are released. Convenient, but also a drain on your battery. To only update apps when you want to, and thus manage your battery better:
Settings -> iTunes & App Store -> Updates -> move slider to off/white
7. Auto-Lock Sooner -
You can set your iPhone to automatically go to sleep – a feature known as Auto-Lock - after a certain amount of time. The sooner it sleeps, the less power is used to run the screen or other services. Try setting Auto-Lock to 1 or 2 minutes.
Find it in Settings -> General -> Auto-Lock -> Tap your Preference
Few more things that would consume battery even when not is use are the applications that run in background.
Follow the below steps to quit all running applications.
1) Double tap on the home button on the iPhone ( this will display all apps that are running in the back ground).
2) Just click on the tiny red X to quit application ( if iPhone is running on iOS 6 and below) else just swipe yhour finger over the running app upwards to quit ( if running on iOS7).

Oracle 10g Agent goes down itself

I have been observing the Oracle 10g agent goes down by itself and in grid control it reports as Agent unreachable. where do I see the log why Agent is going down on target everytime.

I guess the location is D:\oracle\agent10g\sysman\log
However, I do not see any information why th agent went down ..
log looks like below
2009-12-29 15:35:40,552 Thread-5812 [IBM WebSphere Application Server] InstanceProperty (version) is marked OPTIONAL but is being used
(00506)
2009-12-29 15:35:47,599 Thread-5812 EMAgent started successfully
(00702)
2010-01-06 11:00:36,085 Thread-4360 Starting Agent 10.2.0.4.0 from D:\oracle\agent10g
(00701)
2010-01-06 11:00:37,929 Thread-4360 [E-Mail IMAP Server] InstanceProperty (imap_host) is marked OPTIONAL but is being used
(00506)
2010-01-06 11:00:38,804 Thread-4360 Invalid expression (CacheFlushSuccess __delta) > 0 ? (CacheFlushSuccess __delta ) : 0
(00101)
2010-01-06 11:00:39,132 Thread-4360 [Database Instance] InstanceProperty (DBVersion) is marked OPTIONAL but is being used
(00506)
2010-01-06 11:00:39,445 Thread-4360 [Identity Manager Repository] InstanceProperty (Port) is marked OPTIONAL but is being used
(00506)
2010-01-06 11:00:39,445 Thread-4360 [Identity Manager Repository] InstanceProperty (SID) is marked OPTIONAL but is being used
(00506)
2010-01-06 11:00:39,445 Thread-4360 [Identity Manager Repository] InstanceProperty (url) is marked OPTIONAL but is being used
(00506)
2010-01-06 11:00:39,445 Thread-4360 [Identity Manager Repository] InstanceProperty (jdbcdriver) is marked OPTIONAL but is being used
(00506)
2010-01-06 11:00:39,585 Thread-4360 [Oracle BPEL Process Manager] InstanceProperty (oc4jTargetName) is marked OPTIONAL but is being used
(00506)
2010-01-06 11:00:40,616 Thread-4360 [E-Mail POP Server] InstanceProperty (pop_host) is marked OPTIONAL but is being used
(00506)
2010-01-06 11:00:40,726 Thread-4360 [Cluster Database] InstanceProperty (DBVersion) is marked OPTIONAL but is being used
(00506)
2010-01-06 11:00:40,851 Thread-4360 [Siebel Gateway Server] InstanceProperty (SIEBEL_GATEWAY) is marked OPTIONAL but is being used
(00506)
2010-01-06 11:00:40,851 Thread-4360 [Siebel Gateway Server] InstanceProperty (SIEBEL_PORT) is marked OPTIONAL but is being used
(00506)
2010-01-06 11:00:40,866 Thread-4360 [Siebel Server] InstanceProperty (filesystem:filesystem) is marked OPTIONAL but is being used
(00506)
2010-01-06 11:00:40,866 Thread-4360 [Siebel Server] InstanceProperty (filesystem:installdir) is marked OPTIONAL but is being used
(00506)
2010-01-06 11:00:40,866 Thread-4360 [Siebel Server] InstanceProperty (filesystem:logdir) is marked OPTIONAL but is being used
(00506)
2010-01-06 11:00:40,898 Thread-4360 [Load Balancer Switch] InstanceProperty (snmpTimeout) is marked OPTIONAL but is being used
(00506)
2010-01-06 11:00:40,960 Thread-4360 [E-Mail SMTP Inbound Server] InstanceProperty (smtp_host) is marked OPTIONAL but is being used
(00506)
2010-01-06 11:00:41,007 Thread-4360 [E-Mail SMTP Outbound Server] InstanceProperty (smtp_host) is marked OPTIONAL but is being used
(00506)
2010-01-06 11:00:41,085 Thread-4360 Undefined column name interval in expression ( active.requests > 0) ? active.requests/(interval*60) : 0
(00104)
2010-01-06 11:00:41,132 Thread-4360 [BEA WebLogic Managed Server] InstanceProperty (version) is marked OPTIONAL but is being used
(00506)
2010-01-06 11:00:41,226 Thread-4360 [IBM WebSphere Application Server] InstanceProperty (version) is marked OPTIONAL but is being used
(00506)
2010-01-06 11:00:48,054 Thread-4360 EMAgent started successfully (00702)

Oracle 10g database installation in red hat 5

what are the packages needed for oracle 10g database installation in red hat 5?
what do you mean by yum way of installation?

Check on the release notes for your platform
This is for x86-64 Linux.. read it all, then you'll find the "6 Documentation Corrections and Additions" section you'll find the RPMs that you need
http://download.oracle.com/docs/cd/B19306_01/relnotes.102/b15666/toc.htm
then go to the official doc installation of 10gR2 on x86-64 Linux
http://download.oracle.com/docs/cd/B19306_01/install.102/b15667/toc.htm
Yum is a package management tool. This is what you'll be using to install the RPMs. But first you'll have to setup the Yum repository, usually what I do is stage the DVD media on the server then make it as a repository. If ever there's a specific (higher) version that I need then I just pull it on the RedHat Network.
There are a lot of HOWTOs about Yum. You may read on this link http://docs.fedoraproject.org/yum/en/
- Karl Arao
http://karlarao.wordpress.com/

I am using firefox 3.6.17 i upgraded it to 4.1.but it does not work properly sometimes it opens every website and most of the time it does not work . so what is the problem please help . thank you

i am using firefox 3.6.17 i upgraded it to 4.1.but it does not work properly sometimes it opens every website and most of the time it does not work . so what is the problem please help . thank you

Did you check your security software (firewall)?
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
See:
* [[Server not found]]
* [[Firewalls]]

I'm using macbook and i want to upload videos in vimeo, they informed me that safari 5.1 is no longer supported. what should i do? please advice, thank you!

i'm using macbook and i want to upload videos in vimeo, they informed me that safari 5.1 is no longer supported. what should i do? please advice, thank you!

If there is an indication of minimum specification in browser support, flash player plugin or other limits that have recently been changed, those should be available from Vimeo support.
The expectation of several things to be continued in an older OS X such as Leopard 10.5.8, has been showing its age and various browsers supporting that system online are fewer now. Safari has no upgrade version for this old of OS X. You may be able to use a different web browser to see if it would work.
There may be a later version of Flash that could work, or maybe not. A few browsers may do OK, I have a version of SeaMonkey (not the PPC version) in my MacBook1.1, running in Leopard 10.5.8. The last version of FireFox is no longer updated, but I have that too. The iCab browser (shareware) may do OK, you can test it since it runs freely w/o license.
For overall better web experience, you may need to look into the MacBook specifications and consider an upgrade to both the OS X system (buy/install retail Snow Leopard 10.6 DVD -- then download Combo Update 10.6.8 v1.1) and see if the computer can support more chip RAM installed. Of course if the hard disk drive is running full, make an external archive of your created content and a backup before considering upgrading the OS X and any applications.
With Snow Leopard 10.6.8, you have better browser support, newer Flash player plugin, and a few features that may be better for your overall experience with the MacBook. However it may ask for more resources than a basic Leopard 10.5.8 system, generally most reviews appear to be good. I have a MacBook1.1 (mid-2006) coreduo 1.83GHz model; it can run Snow Leopard 10.6.8 as a last upgrade & nothing further for mine.
While OS X 10.6.8 is a portal to attempt further OS X upgrades via Mac App Store, etc, the hardware of the early older MacBook may find better usefulness left at Snow Leopard. If you have several older applications written for PPC hardware (they run under Rosetta, an option in Snow Leopard no longer available after it) you may choose to keep the upgrade path at OS X 10.6.8 Snow Leopard even if there is a hint your MacBook could be upgraded to, say, Lion 10.7.5. You'd lose support for older applications not written to Universal or PPC.
Good luck & happy computing!

Oracle 10g agent installation problem -- please advice. Thanks.

Similar Messages

Maybe you are looking for