Oracle 10g client installation process step by step

Hello all,
1)I have oracle 10g client installed in my system and the required drivers from the oracle site in xi .
2)Also I tried coping the client sw from other system in which the oracle client was working fine.when I run connect.cmd i am getting an error"ora12154:tns:could not connect identifier specified.
Kindly let me know the step by step process of the same in brief.
please send the same to [email protected]
thanks,
Srinivas

pls go through the link
http://www.cryer.co.uk/brian/oracle/ORA12154.htm
http://www.is.mcgill.ca/minerva/Help/ora12154.htm
http://www.techonthenet.com/oracle/errors/ora12154.php
http://www.ironspeed.com/Designer/4.0.3/WebHelp/Part_VI/ORA_12154_TNS_could_not_resolve_service_name.htm
with regards
Gabriel

Similar Messages

Oracle 10g client installation on OpenVMS 8.3 Itanium

I am trying to perform the installation of Oracle 10g client installation on OpenVMS 8.3 Itanium. I am getting the OUI (Oracle Universal Installer) window up and as soon as I click the "next" button it errors. The error is:
SEVERE: OUI-10207:There is not enough disk space on the OUI swap area /dsa50/temp/OraInstall2007-06-05_06-19-23PM. Please make at le
ast 9MB of space available and retry.
The disk for the oracle installation temp location and home location are in different directories on the same ODS-5 formated disk. The disk has approximately 251711296 free blocks.
The trace.log located in the <oracle_home> area shows the following:
in ssGetVolumeFreeSpace
in ssGetVolumeFreeSpace:before getFreeSpace:DSA50
Vol name is DSA50
Disk name is [.DSA50]
Disk=, Free blocks = 3362
in ssGetVolumeFreeSpace:after getFreeSpace:3362
returning from ssGetVolumeFreeSpace
The "temp" disk is DSA50.
Has anyone seen this issue with installation of the client on a large disk?
Are there any suggestions on what to do to correct this issue?

SEVERE: OUI-10207:There is not enough disk space. This error may be present at the Open VMS Itanium platform at it is due to bug 5981203 "OUI CALCULATES AVAILABLE DISK SPACE WRONG" and bug 5580279 "OUI FAILS WITH OUI-10207 ERROR". It is fixed in 10.2.0.3.0
As a workaround, use a logical diskname or the volume name and not the physical device name
~ Madrid

Oracle 10g client installation skips

Hi,
I have Oracle 11g database home in my 64 bit Windows 7 machine. However, now i would like to install Oracle 10.2.0 client as well. I tried giving a separate location. But for some reason, whenever i start the Setup and run the Administrator Type, the installation just skips without giving any errors. It just creates the inventory folder in the specified path.
It goes to the Product-Specific Prerequisite Checks and exits without giving any warnings or errors.
Can someone suggest what should be done here?
Regards,
Namrata

Using paramFile: C:\Oracle 10g\client\install\oraparam.ini
No pre-requisite checks found in oraparam.ini, no system pre-requisite checks will be executed.
The commandline for unzip:
C:\Oracle 10g\client\install\unzip -qqq ../stage/Components/oracle.swd.jre/1.4.2.8.0/1/DataFiles/"*.jar" -d "C:\Temp\OraInstall2013-11-15_05-15-43PM"
The commandline for unzip:
C:\Oracle 10g\client\install\unzip -qqq ..\stage\Components\oracle.swd.oui\10.2.0.1.0\1\DataFiles\/"*.jar" -d "C:\Temp\OraInstall2013-11-15_05-15-43PM"
The commandline for unzip:
C:\Oracle 10g\client\install\unzip -qqq ..\stage\Components\oracle.swd.oui.core\10.2.0.1.0\1\DataFiles\/"*.jar" -d "C:\Temp\OraInstall2013-11-15_05-15-43PM"
The number of files bootstrapped for the jre is 584.
The number of files bootstrapped for the oui is 100.INFO: Environment Variables:
INFO: ORACLE_HOME =
INFO: PATH = C:\Informatica\9.0.1\clients\tools\datadirect;C:\Informatica\9.0.1\clients\DeveloperClient\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\OracleBI\server\Bin;C:\OracleBI\web\bin;C:\OracleBI\web\catalogmanager;C:\OracleBI\SQLAnywhere;C:\Program Files (x86)\Java\jdk1.7.0_25\bin;C:\Java\jdk1.7.0_25\bin;C:\app\nbhattacharjee\product\11.2.0\dbhome_1\bin;C:\Oracle_Patch;C:\Informatica\9.1.0\DataTransformation\bin;C:\Informatica\9.1.0\clients\tools\datadirect;C:\Informatica\9.1.0\clients\DeveloperClient\bin;C:\Informatica\9.1.0\clients\java\jre\bin\server;\pp2;C:\Program Files (x86)\NCR\Teradata Client\bin\;C:\Program Files (x86)\NCR\Teradata Client\bin\;C:\Program Files\NCR\Teradata Client\cliv2\;C:\Program Files (x86)\NCR\Common Files\Shared ICU Libraries for Teradata\lib;C:\WINDOWS\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Common Files\Roxio Shared\10.0\DLLShared\;C:\Program Files (x86)\Common Files\Roxio Shared\DLLShared\;C:\Program Files (x86)\Common Files\Roxio Shared\DLLShared\;C:\Program Files (x86)\Common Files\Roxio Shared\10.0\DLLShared\;C:\Program Files\WIDCOMM\Bluetooth Software\;C:\Program Files\WIDCOMM\Bluetooth Software\syswow64;C:\Program Files (x86)\Common Files\NCR\AXSMOD\;C:\R-2.15.1\bin\x64;C:\Oracle\Middleware\Oracle_BI1\bin;C:\Oracle\Middleware\Oracle_BI1\opmn\bin;C:\Oracle\Middleware\Oracle_BI1\opmn\lib;C:\Oracle\Middleware\Oracle_BI1\perl\bin;C:\Users\nbhattacharjee\AppData\Local\Smartbar\Application\;C:\Users\nbhattacharjee\AppData\Local\Smartbar\Application\
INFO: CLASSPATH = C:\Informatica\9.1.0\DataTransformation\api\lib\CM_JavaAPI.jar;C:\Program Files\Common Files\NCR\JMSAXSMOD;C:\Java\jdk1.7.0_25\lib
INFO: Username:nbhattacharjee
INFO: Oracle Universal Installer version is 10.2.0.1.0
INFO: Setting variable 'PREREQ_CONFIG_LOCATION' to ''. Received the value from variable association.
INFO: Reader/Writer 'oracle.sysman.oii.oiic.OiicGlobalContextXMLReaderWriter' was created.
INFO:
*** Welcome Page***
INFO: Initializing install inventory
INFO: Setting up install inventory
INFO:
*** Specify Source Location Page***
INFO: Initializing OUI Shiphome access setup
INFO: DefaultifyLangiages : Value of oracle.installer.defaultifyLanguages : false
INFO: Performing operation for OUI Shiphome access setup
INFO:
*** Select a Product to Install Page***
INFO: Setting the 'TopLevelComp ( ToplevelComp )' property to 'oracle.client, 10.2.0.1.0, >0.0.0.0.0, [ 912 ][OH:2]'. Received the value from the default settings.
INFO:
*** Select Installation Type Page***
INFO: Setting the 'InstallType ( DEP_MODE )' property to 'Administrator'. Received the value from the UI page.
INFO: Setting the 'TopLevelInstallType ( TLDepModes )' property to 'Administrator'. Received the value from the UI page.
INFO: The selected install type is "Administrator".
INFO:
*** Specify Home Details Page***
INFO: Setting the 'OracleHome ( ORACLE_HOME )' property to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1'. Received the value from the UI page.
INFO: Setting the 'OracleHomeName ( ORACLE_HOME_NAME )' property to 'OraClient10g_home1'. Received the value from the UI page.
INFO: Initializing OUI Oracle Home access setup
INFO: Setting variable 'ORACLE_HOME' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1'. Received the value from the UI page.
INFO: Loading shiphomepropertiesfrom C:\Temp\OraInstall2013-11-15_05-15-43PM/shiphomeproperties.xml
INFO: DefaultifyLangiages : Value of oracle.installer.defaultifyLanguages : false
INFO: Setting the PROD_HOME variable of 'oracle.client_10.2.0.1.0' to ''. Received the value from the variable calculation.
INFO: oracle.client Product Location: Empty path specified.
INFO: Setting the PROD_HOME variable of 'oracle.bali.displayFonts_9.0.2.0.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1/oracle_fonts'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.oem.client_10.2.0.1.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1/sysman'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.oraolap.mgmt_10.2.0.1.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1/oracle_olap_wrksht'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.rdbms.ic_10.2.0.1.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1/oracle.rdbms.ic'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.sqlplus.ic_10.2.0.1.0' to ''. Received the value from the variable calculation.
INFO: oracle.sqlplus.ic Product Location: Empty path specified.
INFO: Setting the PROD_HOME variable of 'oracle.ldap.esm_10.2.0.1.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.has.client_10.2.0.1.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1/oracle_has_client'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.sqlj_10.2.0.1.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1/oracle_java_sqlj'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.bali.jle3_3.0.1.0.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1/jle3'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.swd.oui_10.2.0.1.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1\oui'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.swd.oui.core_10.2.0.1.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1\oui'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.swd.opatch_10.2.0.1.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1\OPatch'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.swd.jre_1.4.2.8.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1\jre\1.4.2'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.ons_10.1.0.3.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1/opmn'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.assistants.acf_10.2.0.1.0' to ''. Received the value from the variable calculation.
INFO: oracle.assistants.acf Product Location: Empty path specified.
INFO: Setting the PROD_HOME variable of 'oracle.bali.cabo_2.1.22.0.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1/uix'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.bali.dbui_2.2.13.0.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1/dbui'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.bali.dbui4_4.1.7.0.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1/dbui4'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.bali.ewt_3.4.38.0.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1/ewt'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.bali.help_4.2.6.1.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1/help'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.bali.ice_5.2.3.6.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1/ice'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.bali.jewt_4.2.33.0.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1/jewt'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.bali.jle_2.0.3.0.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1/jle'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.bali.kodiak_1.2.1.0.0I' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1/kodiak'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.bali.regexp_2.1.9.0.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1/regexp'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.bali.share_1.1.18.0.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1/oracle_tools_share'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.buildtools.common_10.2.0.1.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1/oracle_buildtools_common'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.buildtools.rsf_10.2.0.1.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1/oracle_buildtools_rsf'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.csmig_10.2.0.1.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1/oracle_rdbms_expimp'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.dbjava.common_10.2.0.1.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1/oracle.dbjava.common'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.dbjava.ic_10.2.0.1.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1/oracle_dbjava_ic'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.dbjava.jdbc_10.2.0.1.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1/oracle_dbjava_jdbc'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.dbjava.jdbc12_10.2.0.1.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1/oracle.dbjava.jdbc12'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.dbjava.jdbc14_10.2.0.1.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1/oracle.dbjava.jdbc14'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.dbjava.rsf_10.2.0.1.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1/oracle.dbjava.rsf'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.emdw.emcp_10.2.0.1.0' to ''. Received the value from the variable calculation.
INFO: oracle.emdw.emcp Product Location: Empty path specified.
INFO: Setting the PROD_HOME variable of 'oracle.emdw.rsf_10.2.0.1.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1/oracle.emdw.rsf'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.has.common_10.2.0.1.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1/oracle_prod'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.has.rsf_10.2.0.1.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1/oracle_rsf_has_rsf'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.javavm.client_10.2.0.1.0' to ''. Received the value from the variable calculation.
INFO: oracle.javavm.client Product Location: Empty path specified.
INFO: Setting the PROD_HOME variable of 'oracle.jdk_1.4.2.0.8' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1\jdk'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.ldap.admin_10.2.0.1.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.ldap.client_10.2.0.1.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.ldap.rsf_10.2.0.1.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1/oracle_ldap_rsf_cmp'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.network.aso_10.2.0.1.0' to ''. Received the value from the variable calculation.
INFO: oracle.network.aso Product Location: Empty path specified.
INFO: Setting the PROD_HOME variable of 'oracle.network.client_10.2.0.1.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1/oracle_network_client'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.network.owm_10.2.0.1.0' to ''. Received the value from the variable calculation.
INFO: oracle.network.owm Product Location: Empty path specified.
INFO: Setting the PROD_HOME variable of 'oracle.network.rsf_10.2.0.1.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1/oracle.network.rsf'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.network.rsf.ic_10.2.0.1.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1/oracle.network.rsf.ic'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.network.ssl_10.2.0.1.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1/oracle.network.ssl'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.nlsrtl.rsf_10.2.0.1.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1/oracle_nlsrtl_rsf'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.nlsrtl.rsf.lbuilder_10.2.0.1.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1/oracle_nlsrtl_rsf_lbuilder'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.ntoledb_10.2.0.1.0' to ''. Received the value from the variable calculation.
INFO: oracle.ntoledb Product Location: Empty path specified.
INFO: Setting the PROD_HOME variable of 'oracle.ntoledb.odp_net_10.2.0.1.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1/ODP.NET'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.ntoramts_10.2.0.1.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1/oramts'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.ntrdbms.admin_10.2.0.1.0' to ''. Received the value from the variable calculation.
INFO: oracle.ntrdbms.admin Product Location: Empty path specified.
INFO: Setting the PROD_HOME variable of 'oracle.ntrdbms.oraconfig_10.2.0.1.0' to ''. Received the value from the variable calculation.
INFO: oracle.ntrdbms.oraconfig Product Location: Empty path specified.
INFO: Setting the PROD_HOME variable of 'oracle.ntrdbms.perfmon_10.2.0.1.0' to ''. Received the value from the variable calculation.
INFO: oracle.ntrdbms.perfmon Product Location: Empty path specified.
INFO: Setting the PROD_HOME variable of 'oracle.odbc_10.2.0.1.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1 in'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.odbc.ic_10.2.0.1.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1 in'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.oem.oemlt_10.2.0.1.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1/oemlt'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.oo4o_10.2.0.1.0' to ''. Received the value from the variable calculation.
INFO: oracle.oo4o Product Location: Empty path specified.
INFO: Setting the PROD_HOME variable of 'oracle.oracore.rsf_10.2.0.1.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1/oracle.oracore.rsf'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.oraolap.api_10.2.0.1.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1/oracle.oraolap.api'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.oraolap.dbscripts_10.2.0.1.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1/oracle_prod'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.ordim.annotator_10.2.0.1.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1/oracle_prod'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.ordim.client_10.2.0.1.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1/oracle.interMedia.imclient'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.perlint_5.8.3.0.2' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1\perl'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.precomp_10.2.0.1.0' to ''. Received the value from the variable calculation.
INFO: oracle.precomp Product Location: Empty path specified.
INFO: Setting the PROD_HOME variable of 'oracle.precomp.common_10.2.0.1.0' to ''. Received the value from the variable calculation.
INFO: oracle.precomp.common Product Location: Empty path specified.
INFO: Setting the PROD_HOME variable of 'oracle.precomp.lang_10.2.0.1.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1/oracle_prod'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.precomp.rsf_10.2.0.1.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1/oracle_rsf_precomp_rsf'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.rdbms.crs_10.2.0.1.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1/oracle_prod'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.rdbms.dbscripts_10.2.0.1.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1/oracle_rdbms_dbscripts'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.rdbms.hs_common_10.2.0.1.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1/oracle_rdbms_hs_common'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.rdbms.install.common_10.2.0.1.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1/oracle.rdbms.install.common'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.rdbms.oci_10.2.0.1.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1/oracle_rdbms_oci'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.rdbms.plsql_10.2.0.1.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1/oracle_rdbms_plsql'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.rdbms.rsf_10.2.0.1.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1/oracle.rdbms.rsf'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.rdbms.rsf.ic_10.2.0.1.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1/oracle.rdbms.ic'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.rdbms.rman_10.2.0.1.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1/oracle.rdbms.rman'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.rdbms.util_10.2.0.1.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1/oracle.rdbms.util'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.rsf_10.2.0.1.0' to ''. Received the value from the variable calculation.
INFO: oracle.rsf Product Location: Empty path specified.
INFO: Setting the PROD_HOME variable of 'oracle.slax.rsf_10.2.0.1.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1/oracle.slax.rsf'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.sqlj.sqljruntime_10.2.0.1.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1/oracle_java_sqlj_sqljruntime'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.sqlplus_10.2.0.1.0' to ''. Received the value from the variable calculation.
INFO: oracle.sqlplus Product Location: Empty path specified.
INFO: Setting the PROD_HOME variable of 'oracle.winprod_10.2.0.1.0' to ''. Received the value from the variable calculation.
INFO: oracle.winprod Product Location: Empty path specified.
INFO: Setting the PROD_HOME variable of 'oracle.wwg.plsql_10.2.0.1.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1/oracle_rdbms'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.xdk_10.2.0.1.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1/oracle_prod'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.xdk.parser.java_10.2.0.1.0' to ''. Received the value from the variable calculation.
INFO: oracle.xdk.parser.java Product Location: Empty path specified.
INFO: Setting the PROD_HOME variable of 'oracle.xdk.rsf_10.2.0.1.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1/oracle_rsf_rdbms_rsf'. Received the value from the variable calculation.
INFO: Setting the PROD_HOME variable of 'oracle.java.j2ee.core_10.1.2.0.0' to 'C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1\jdk\jre\lib\ext'. Received the value from the variable calculation.
INFO: Performing operation for OUI Oracle Home access setup
INFO: Unable to read C:/app/nbhattacharjee/product/11.2.0/dbhome_1/client_1/inventory/ContentsXML/comps.xml. Some inventory information may be lost.
INFO: SRVM ClusterInfo.IsLocalOnly() called. Return value obtained is 'false'.
INFO: The CRS clusterware location for 'oracle.crs 10.1.0.2.0' is not found.
INFO: This is not a cluster system.
INFO: Node selection page will not be shown.
INFO: Install type for "Oracle Client 10.2.0.1.0 " is "Administrator".
INFO: OUI-10066:Not all the dependencies for the component Oracle Client 10.2.0.1.0 could be found. Missing component oracle.doc 10.2.0.1.0.
INFO: Install type for "Oracle SQLJ 10.2.0.1.0 " is "Typical".
INFO: Install type for "Oracle interMedia Client Option 10.2.0.1.0 " is "Typical".
INFO: Conflict while setting install type of "SQLJ Runtime 10.2.0.1.0 " to "Typical (Typical)". Install type already set to "Typical (Typical)". Seting it to "Custom (Custom)".
INFO: Install type for "Oracle Internet Directory Client 10.2.0.1.0 " is "Typical".
INFO: Conflict while setting install type of "Oracle Database Utilities 10.2.0.1.0 " to "Typical (Typical)". Install type already set to "Client (Client)". Seting it to "Custom (Custom)".
INFO: Install type for "Oracle Database Utilities 10.2.0.1.0 " is "Custom".
INFO: Conflict while setting install type of "Required Support Files 10.2.0.1.0 " to "Custom (Custom)". Install type already set to "Typical (Typical)". Seting it to "Custom (Custom)".
INFO: OUI-10066:Not all the dependencies for the component Oracle Database Utilities 10.2.0.1.0 could be found. Missing component oracle.omwb 10.1.0.1.0.
INFO: OUI-10066:Not all the dependencies for the component Oracle Database Utilities 10.2.0.1.0 could be found. Missing component oracle.workflow.builder 2.6.4.0.0.
INFO: Install type for "Generic Connectivity Common Files 10.2.0.1.0 " is "Custom".
INFO: Install type for "Oracle Programmer 10.2.0.1.0 " is "Database Administrator".
INFO: Install type for "OLAP Analytic Workspace Manager and Worksheet 10.2.0.1.0 " is "Typical".
INFO: Conflict while setting install type of "Enterprise Manager 10g Java Console 10.2.0.1.0 " to "Minimal (Minimum)". Install type already set to "Typical (Typical)". Seting it to "Custom (Custom)".
INFO: Conflict while setting install type of "Oracle Database User Interface 2.2.13.0.0 " to "Minimal (Minimum)". Install type already set to "Typical (Typical)". Seting it to "Custom (Custom)".
INFO: Install type for "Oracle Recovery Manager 10.2.0.1.0 " is "Custom".
INFO: Install type for "Oracle Advanced Security 10.2.0.1.0 " is "Typical".
INFO: Install type for "Enterprise Manager 10g Java Console 10.2.0.1.0 " is "Custom".
INFO: Conflict while setting install type of "Oracle JFC Extended Windowing Toolkit 4.2.33.0.0 " to "Custom (Custom)". Install type already set to "Minimal (Minimum)". Seting it to "Custom (Custom)".
INFO: Conflict while setting install type of "Oracle JDBC Thin Driver for JDK 1.4 10.2.0.1.0 " to "Custom (Custom)". Install type already set to "Typical (Typical)". Seting it to "Custom (Custom)".
INFO: Conflict while setting install type of "Secure Socket Layer 10.2.0.1.0 " to "Custom (Custom)". Install type already set to "Typical (Typical)". Seting it to "Custom (Custom)".
INFO: Conflict while setting install type of "Oracle Net 10.2.0.1.0 " to "Custom (Custom)". Install type already set to "Typical (Typical)". Seting it to "Custom (Custom)".
INFO: Conflict while setting install type of "SQL*Plus 10.2.0.1.0 " to "Custom (Custom)". Install type already set to "Typical (Typical)". Seting it to "Custom (Custom)".
INFO: Install type for "Oracle Windows Interfaces 10.2.0.1.0 " is "ClientTypical".
INFO: Install type for "Oracle Net 10.2.0.1.0 " is "Custom".
INFO: Install type for "Oracle Administration Assistant for Windows 10.2.0.1.0 " is "Minimal".
INFO: Install type for "Oracle Objects for OLE 10.2.0.1.0 " is "Typical".
INFO: Install type for "Oracle ODBC Driver 10.2.0.1.0 " is "Typical".
INFO: Install type for "Oracle Provider for OLE DB 10.2.0.1.0 " is "Typical".
INFO: Install type for "Oracle Data Provider for .NET 10.2.0.1.0 " is "Typical".
INFO: Install type for "Oracle Call Interface (OCI) 10.2.0.1.0 " is "Typical".
INFO: Install type for "Precompiler Common Files 10.2.0.1.0 " is "Typical".
INFO: Conflict while setting install type of "Oracle JDBC Thin Driver for JDK 1.2 10.2.0.1.0 " to "Typical (Typical)". Install type already set to "Minimal (Minimum)". Seting it to "Custom (Custom)".
INFO: Install type for "PL/SQL 10.2.0.1.0 " is "Custom".
INFO: Install type for "Precompilers 10.2.0.1.0 " is "Typical".
INFO: Install type for "Oracle XML Development Kit 10.2.0.1.0 " is "Typical".
INFO: Conflict while setting install type of "XML Parser for Java 10.2.0.1.0 " to "Typical (Typical)". Install type already set to "Minimal (Minimum)". Seting it to "Custom (Custom)".
INFO: Install type for "SQL*Plus 10.2.0.1.0 " is "Custom".
INFO: Install type for "Secure Socket Layer 10.2.0.1.0 " is "Custom".
INFO: Install type for "Database SQL Scripts 10.2.0.1.0 " is "Custom".
INFO: Install type for "OLAP SQL Scripts 10.2.0.1.0 " is "Custom".
INFO: Install type for "PL/SQL Embedded Gateway 10.2.0.1.0 " is "Custom".
INFO: Install type for "Oracle LDAP administration 10.2.0.1.0 " is "Typical".
INFO: Install type for "Character Set Migration Utility 10.2.0.1.0 " is "Custom".
INFO: Install type for "Oracle Java Client 10.2.0.1.0 " is "Custom".
INFO: Install type for "Assistant Common Files 10.2.0.1.0 " is "Custom".
INFO: Install type for "Installation Common Files 10.2.0.1.0 " is "Typical".
INFO: Install type for "HAS Common Files 10.2.0.1.0 " is "Typical".
INFO: Install type for "Oracle JDBC/THIN Interfaces 10.2.0.1.0 " is "Typical".
INFO: Install type for "Oracle JDBC Thin Driver for JDK 1.2 10.2.0.1.0 " is "Custom".
INFO: Conflict while setting install type of "Oracle JDBC/OCI Instant Client 10.2.0.1.0 " to "Custom (Custom)". Install type already set to "Typical (Typical)". Seting it to "Custom (Custom)".
INFO: Install type for "Oracle JDBC Thin Driver for JDK 1.4 10.2.0.1.0 " is "Custom".
INFO: Install type for "Oracle Instant Client 10.2.0.1.0 " is "Typical".
INFO: Install type for "JDBC Common Files 10.2.0.1.0 " is "Custom".
INFO: Install type for "Oracle Code Editor 1.2.1.0.0I " is "Custom".
INFO: Install type for "Oracle Database User Interface 2.2.13.0.0 " is "Custom".
INFO: Install type for "Required Support Files 10.2.0.1.0 " is "Custom".
INFO: Conflict while setting install type of "Oracle Globalization Support 10.2.0.1.0 " to "Custom (Custom)". Install type already set to "Typical (Typical)". Seting it to "Custom (Custom)".
INFO: Conflict while setting install type of "Oracle Core Required Support Files 10.2.0.1.0 " to "Custom (Custom)". Install type already set to "Typical (Typical)". Seting it to "Custom (Custom)".
INFO: Conflict while setting install type of "Oracle RAC Required Support Files-HAS 10.2.0.1.0 " to "Custom (Custom)". Install type already set to "Typical (Typical)". Seting it to "Custom (Custom)".
INFO: Install type for "Enterprise Manager plugin Common Files 10.2.0.1.0 Beta" is "Custom".
INFO: Install type for "Enterprise Manager Minimal Integration 10.2.0.1.0 " is "Custom".
INFO: Install type for "Oracle UIX 2.1.22.0.0 " is "Typical".
INFO: Install type for "Buildtools Common Files 10.2.0.1.0 " is "Custom".
INFO: Install type for "Oracle Globalization Support 10.2.0.1.0 " is "Custom".
INFO: Install type for "Oracle Locale Builder 10.2.0.1.0 " is "Custom".
INFO: Install type for "regexp 2.1.9.0.0 " is "Typical".
INFO: Install type for "Oracle Display Fonts 9.0.2.0.0 " is "Typical".
INFO: Install type for "Oracle Help For Java 4.2.6.1.0 " is "Custom".
INFO: Install type for "Oracle Clusterware High Availability API 10.2.0.1.0 " is "Typical".
INFO: Install type for "Oracle Wallet Manager 10.2.0.1.0 " is "Custom".
INFO: Install type for "LDAP Required Support Files 10.2.0.1.0 " is "Custom".
INFO: Install type for "Oracle Net Required Support Files 10.2.0.1.0 " is "Custom".
INFO: Conflict while setting install type of "SSL Required Support Files for InstantClient 10.2.0.1.0 " to "Custom (Custom)". Install type already set to "Typical (Typical)". Seting it to "Custom (Custom)".
INFO: Install type for "Oracle Enterprise Security Manager 10.2.0.1.0 " is "Typical".
INFO: Install type for "Oracle Ice Browser 5.2.3.6.0 " is "Custom".
INFO: Install type for "Perl Interpreter 5.8.3.0.2 " is "Custom".
INFO: Install type for "Oracle Java Layout Engine 2.0.3.0.0 " is "Custom".
INFO: Install type for "Oracle Core Required Support Files 10.2.0.1.0 " is "Custom".
INFO: Install type for "Platform Required Support Files 10.2.0.1.0 " is "Custom".
INFO: Install type for "Precompiler Required Support Files 10.2.0.1.0 " is "Custom".
INFO: Install type for "Parser Generator Required Support Files 10.2.0.1.0 " is "Custom".
INFO: Install type for "Oracle ODBC Driverfor Instant Client 10.2.0.1.0 " is "Typical".
INFO: Install type for "Agent Required Support Files 10.2.0.1.0 " is "Custom".
INFO: Install type for "RDBMS Required Support Files 10.2.0.1.0 " is "Custom".
INFO: Conflict while setting install type of "RDBMS Required Support Files for Instant Client 10.2.0.1.0 " to "Custom (Custom)". Install type already set to "Typical (Typical)". Seting it to "Custom (Custom)".
INFO: Install type for "RDBMS Required Support Files for Instant Client 10.2.0.1.0 " is "Custom".
INFO: Install type for "XDK Required Support Files 10.2.0.1.0 " is "Custom".
INFO: Install type for "DBJAVA Required Support Files 10.2.0.1.0 " is "Custom".
INFO: Install type for "Oracle RAC Required Support Files-HAS 10.2.0.1.0 " is "Custom".
INFO: Install type for "SSL Required Support Files for InstantClient 10.2.0.1.0 " is "Custom".
INFO: Install type for "XML Parser for Java 10.2.0.1.0 " is "Custom".
INFO: Install type for "Oracle Java Layout Engine 3 3.0.1.0.0 " is "Minimal".
INFO: Install type for "Oracle Extended Windowing Toolkit 3.4.38.0.0 " is "Custom".
INFO: Install type for "Oracle JFC Extended Windowing Toolkit 4.2.33.0.0 " is "Custom".
INFO: Install type for "Oracle OLAP API 10.2.0.1.0 " is "Minimum".
INFO: Install type for "Oracle Database User Interface 4 4.1.7.0.0 " is "Minimal".
INFO: Install type for "Bali Share 1.1.18.0.0 " is "Custom".
INFO: Install type for "SQLJ Runtime 10.2.0.1.0 " is "Custom".
INFO: Install type for "Oracle interMedia Annotator 10.2.0.1.0 " is "Typical".
INFO: Install type for "Oracle Notification Service 10.1.0.3.0 " is "Typical".
INFO: Install type for "Oracle Clusterware RDBMS Files 10.2.0.1.0 " is "Typical".
INFO: Install type for "Oracle JDBC/OCI Instant Client 10.2.0.1.0 " is "Custom".
INFO: Install type for "SQL*Plus Files for Instant Client 10.2.0.1.0 " is "Typical".
INFO: Install type for "Oracle Universal Installer 10.2.0.1.0 " is "Custom".
INFO: Install type for "Oracle One-Off Patch Installer 10.2.0.1.0 " is "Custom".
INFO: Install type for "Installer SDK Component 10.2.0.1.0 " is "Custom".
INFO: Install type for "Sun JDK 1.4.2.0.8 " is "Complete".
INFO: Conflict while setting install type of "Sun JDK extensions 10.1.2.0.0 " to "Complete (Complete)". Install type already set to "Typical (Typical)". Seting it to "Custom (Custom)".
INFO: Install type for "Sun JDK extensions 10.1.2.0.0 " is "Custom".
INFO: Setting the PRE_REQUISITE variable of 'oracle.client_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.sqlj_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.rdbms.util_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.javavm.client_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.dbjava.jdbc_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.ldap.client_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.winprod_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.rdbms.oci_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.precomp_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.xdk_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.network.aso_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Calling Query generalQueries10.1.0.3.0 isCurrentPlatformInGroup
platGroup = Windows
INFO: Query Returned: true
INFO: Calling Query rgsQueries10.1.0.2.0 isProductInstalled
Location = C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1
InternalName = w32oem10
MaxVersion = null
MinVersion = null
INFO: Query Returned: false
INFO: Calling Query rgsQueries10.1.0.2.0 isProductInstalled
Location = C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1
InternalName = oracle.swd.oui
MaxVersion = 1.6.0.2.0
MinVersion = 0.0.0.0.0
INFO: Query Returned: false
INFO: Setting the PRE_REQUISITE variable of 'oracle.oem.client_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.oraolap.mgmt_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.network.client_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.ordim.client_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.ons_10.1.0.3.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.has.client_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.rdbms.install.common_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.rdbms.ic_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.swd.opatch_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.swd.oui_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.sqlj.sqljruntime_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.ordim.annotator_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.dbjava.ic_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.bali.dbui_2.2.13.0.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.sqlplus_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.network.ssl_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.ldap.admin_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Calling Query generalQueries10.1.0.3.0 isCurrentPlatformInGroup
platGroup = UNIX
INFO: Query Returned: false
INFO: Calling Query rgsQueries10.1.0.2.0 isProductInstalled
Location = C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1
InternalName = w32rsf80
MaxVersion = 8.0.7.0.0
MinVersion = 8.0.3.0.0
INFO: Query Returned: false
INFO: Calling Query rgsQueries10.1.0.2.0 isProductInstalled
Location = C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1
InternalName = w32rsf73
MaxVersion = 7.3.5.0.0
MinVersion = 7.3.1.0.0
INFO: Query Returned: false
INFO: Calling Query areasQueries10.2.0.1.0 productInstalled
location = C:\app\nbhattacharjee\product\11.2.0\dbhome_1\client_1
name = oracle.sysman.netclt
startVersion = 8.0.3.0.0
endVersion = 8.0.6.0.0
acceptCompatible = false
INFO: Query Returned: false
INFO: Setting the PRE_REQUISITE variable of 'oracle.rsf_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.dbjava.jdbc14_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.ldap.esm_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.rdbms.rman_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.rdbms.hs_common_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.rdbms.dbscripts_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.rdbms.plsql_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.csmig_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.precomp.common_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.precomp.lang_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.dbjava.jdbc12_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.oraolap.api_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.bali.dbui4_4.1.7.0.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.bali.jle3_3.0.1.0.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.bali.jewt_4.2.33.0.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.xdk.parser.java_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.assistants.acf_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.bali.cabo_2.1.22.0.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.bali.ewt_3.4.38.0.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.bali.help_4.2.6.1.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.bali.jle_2.0.3.0.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.bali.kodiak_1.2.1.0.0I' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.bali.ice_5.2.3.6.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.oem.oemlt_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.ntrdbms.admin_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.oo4o_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.odbc_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.ntoledb_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.ntoledb.odp_net_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.network.owm_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.odbc.ic_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.rdbms.rsf.ic_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.jdk_1.4.2.0.8' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.network.rsf_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.oraolap.dbscripts_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.wwg.plsql_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.buildtools.common_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.emdw.emcp_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.has.common_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.oracore.rsf_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.nlsrtl.rsf_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.has.rsf_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.rdbms.crs_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.dbjava.common_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.network.rsf.ic_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.sqlplus.ic_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.bali.share_1.1.18.0.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.ldap.rsf_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.buildtools.rsf_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.precomp.rsf_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.slax.rsf_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.emdw.rsf_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.rdbms.rsf_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.xdk.rsf_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.dbjava.rsf_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.java.j2ee.core_10.1.2.0.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.bali.regexp_2.1.9.0.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.bali.displayFonts_9.0.2.0.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.nlsrtl.rsf.lbuilder_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.perlint_5.8.3.0.2' to 'true'. Received the value from the variable calculation.
INFO: Setting the PRE_REQUISITE variable of 'oracle.swd.oui.core_10.2.0.1.0' to 'true'. Received the value from the variable calculation.
INFO:
*** Language Selection Page***
INFO: Setting the 'SelectedLanguages ( SELECTED_LANGUAGES )' property to 'en'. Received the value from the default settings.
INFO:
*** Specify Local Host Name Page***
INFO: Setting the 'HostName ( ORACLE_HOSTNAME )' property to 'USMUMNBHATTACH1.us.deloitte.com'. Received the value from the default settings.
INFO: Defaulting prerequisite location to 'C:\Oracle 10g\client\stage/prereq'.
INFO:
*** Product-Specific Prerequisite Checks Page***
INFO: Entry point:oracle.client_Administrator_install
INFO: Starting Prerequisite checks : Fri Nov 15 11:46:43 GMT 2013
INFO: Checking CertifiedVersions
This is a prerequisite condition to test whether the Oracle software is certified on the current O/S.

Oracle 10g Client Installation

Hi Guys...
I am installing Oracle 10g client on Redhat 5 O/S.
At about 40% during installation the OUI throws below errors:
This are few lines that I tailed from the log file.
INFO: 2/18/10 4:38:24 PM SAST: Starting install Install Phase 1 of component Oracle Call Interface (OCI)
INFO: Calling Action unixActions10.2.0.1.0 createLink
source = libocci.so.10.1
destination = /oracle/sid/102_64/lib/libocci.so
overwriteExistingLink = null
INFO: Exception thrown from action: createLink
Exception Name: FileNotFoundException
Exception String: File not found: %fileName%
Exception Severity: 2
How can I over come this error?
Thanks...

RPM libocci.so.10.1 installed on yours machine?
Please install all these RPM's on your machine -
     binutils-2.17.50.0.6
     compat-libstdc++-33-3.2.3
     compat-libstdc++-296(i386)
     elfutils-libelf-0.125
     elfutils-libelf-devel-0.125
     gcc-4.1.2
     gcc-c++-4.1.2
     glibc-2.5-24
     glibc-common-2.5
     glibc-devel-2.5
     glibc-headers-2.5
     libaio-0.3.106
     libaio-devel-0.3.106
     libgcc-4.1.2
     libstdc++-4.1.2
     libstdc++-devel 4.1.2
     libXp-1.0.0-8.i386.rpm
     make-3.81
     openmotif
     sysstat-7.0.2
     unixODBC-2.2.11
     unixODBC-devel-2.2.11

Oracle 10g client installation error

Hi,
os: Red Hat Enterprise Linux AS release 4
oracle clien: 10.2.0.1.0
I try to install oracle10g client. At 85% of installation I get the error 'ins_net_client.mk'
I ignored the error and completed the installation.
I tried to relink the files. $ORACLE_HOME/bin/relink all
gcc: /shared/ora10gclient/db_1/sqlplus/lib/s0afimai.o: No such file or directory
make: *** [sqlplus] Error 1
make: *** [trcroute] Error 1
/bin/chmod 755 /shared/ora10gclient/db_1/bin/
make: *** No rule to make target `/shared/ora10gclient/db_1/network/lib/s0nsgl.o', needed by `tnslsnr'. Stop.
Here I can find there are junk character files exist all over the bin and lib directories.
Please suggest me why this junk characters exist?
Thanks
KSG
Edited by: KSG on Dec 23, 2009 11:23 AM

Hello,
are you trying to install the client by some other user which is not owner of oracle:dba group?
this will genrally happen when you have different owner or manually changed the permissions.
Please check your /tmp directory for any files releated to ora:DBA may have a soft link check permissions thier.
Regards,
Ajay

TNS configuration needs ocijdbc11.dll : I want to use Oracle 10g client

I configured apex-config.xml to use a TNSNAME. I deployed the APEX listener in a standalone OC4J 10.1.3.5.
It asks for ocijdbc11.dll to be in -Djava.library.path.
This means an Oracle 11g client is required. Why isn't it possible to use an Oracle 10g client installation? Is there a way to use an Oracle 10g installation in combination with the OC4J APEX listener?
I do'n't want to use the "thin" methode because this cannot be used in an Oracle RAC environment as far as I know (at least not with failover).

Hello,
as far as I know, you can use the thin driver to connect to RAC. If I don't remember this wrong, you should be able to configure the URL like this:
jdbc:oracle:thin:@(DESCRIPTION=(LOAD_BALANCE=on)
(ADDRESS=(PROTOCOL=TCP)(HOST=host1) (PORT=1521))
(ADDRESS=(PROTOCOL=TCP)(HOST=host2) (PORT=1521))
(CONNECT_DATA=(SERVICE_NAME=service)))Just my personal opinion: If you want to use a "fat" client, it shouldn't be too hard to install a 11g client. Of course, this will require additional space on your app server, but I like the thought that Oracle tries to keep the APEX Listener a lightweight application that works pretty good for most scenarios. If you try to make it compatible with every option and every version, this wouldn't stay that way.
-Udo

Apply 5699495 w/ Silent installation Oracle 10g client

Good Afternoon,
I have my silent installation of Oracle 10g Administrator Installation working great w/ response file, now I am having an issue with integrating this patch (5699495) into the initial install. I read the README file but it says to just drop the files in the appropriate folder, I want to do it during the install with no user interaction
Any comments or suggestions would be greatly appreciated!

I'd suggest creating a batch file to do the unzip and copy operations.
In the batch file you can call the install first and then do the patch. This way anyone who needs to do the install can just double-click the batch file.
We do a similar thing with an install and then creating a TNS_ADMIN area outside the ORACLE_HOME

Oracle 10g R2 installation on sun solaris 10 Sparc machine

Hi there,
I encountered the following problem during oracle 10g R2 installation on sun solaris 10 Sparc machine
Error encountered:
Using paramFile: /u01/Oracle/10gr2_db_sol/install/oraparam.ini
Checking installer requirements...
Checking operating system version: must be 5.8, 5.9 or 5.10. Actual 5.10
Passed
Checking Temp space: must be greater than 250 MB. Actual 2266 MB Passed
Checking swap space: must be greater than 500 MB. Actual 2335 MB Passed
Checking monitor: must be configured to display at least 256 colors Failed <<<<
>>> Could not execute auto check for display colors using command /usr/openwin/bin/xdpyinfo. Check if the DISPLAY variable is set.
Some requirement checks failed. You must fulfill these requirements before
continuing with the installation,at which time they will be rechecked.
Continue? (y/n) [n]
The following were the steps taken before encountering the above error
1. logged into a workstation
2. From its xterm terminal I logged to the oracle server via ssh oracle@ip
3. keyed in the following at the command prompt
DISPLAY=machine_name:0.0; export DISPLAY
4. executed the following from the command prompt
./runInstaller
Note: when executing the ./runInstaller, the preinstallation checking just hangs at Checking monitor: must be configured to display at least 256 colors. But the log file shows it failed during preinstallation checking as shown in Error encountered
Please help me with this problem.
Thank you
Ravindran Kanniah

It is because of UNIX shell. I also faced this error during installation.
First check your shell by the following command.
$ echo $SHELL
Then select the below.
For csh shell
$ setenv DISPLAY 192.168.1.128:0.0
$ export DISPLAY
For sh,ksh and bash
$ DISPLAY=192.168.1.128:0.0
$ export DISPLAY
After you do this check the value of DISPLAY variable.
$ echo $DISPLAY
If the DISPLAY variable is set then run ./runInstaller.
One advice: Keep a complete log of your terminal session. This will help you in future :)
-aijaz

Oracle 10g R2 installation with ASM+RAC

Gurus,
Need some suggestuon on Oracle 10g R2 installation with ASM and RAC option.
We have found many documents on the Oracle, HP, HP-Oracle CTC and third party web sites, but nothing that is specific to this particular combination of separate
ORACLE_HOMEs, ASM and 10g RAC CRS. It is unclear for me from the documentation how this combination of ASM and 10.2g RAC may best be installed.
The high level steps i got after reading lot of docs as follows - but i am not sure whether these are correct or not. if they are correct, can any one share their experience/notes please?
1) Install CRS
2) Install RDBMS for ASM HOME - create separater oracle home for ASM instance using OUI
3) Install RDBMS for RAC Database Home - create separater oracle home for RAC database using OUI
4) Create ASM database using DBCA -
5) Use dbca to create database.

Oracle provides 'paint by numbers' tutorials called 'Oracle By Example'. (Go to OTN, check under the Training tab)
They have one for a Windows based ASM/RAC that you might want to review. Not your specific environment, but the steps will be dag-nabbed close.
I recommend walking the path (http://otn.oracle.com >> training:OBE >> Database 10g Release 1:VMWare:Installation
http://www.oracle.com/technology/obe/obe10gdb_vmware/install/racinstallwin2k/racinstallwin2k.htm

Problem in oracle 10g(client) to server is oracle 8i

i want to coneect oracle 10g is client to oracle 8i is server. so i am getting problem.
how to connect oracle 10g (client) to oracle 8i server.please give me steps.

so i am getting problem
Apart from the fact it doesn't work - which error message do you recieve??
Dim

I can't install Oracle 10g Client in x86-64(Intel EM64T)

Dear All,
Recently, I tried to install the Oracle 10g client in Redhat Enterprise Linux 4.0 with x86-64 (Intel EM64T) platform. As I know,that is either Oracle 9i or Oracle 10g has been certified to Redhat AS 3.0 operating system.
How can I install Oracle 10g normally under all x86-64 platforms? Or, When does Oracle to release out the patch for all x86-64 versions?

Please reffer to Installation section.
Database Installation

(again) oracle 10g client and oracle 10g express in one computer

hi again, sorry if this question looks like a double post to you.
Well this is quite embarassing yet still make some headache for me. I have my office PC installed with Oracle 10g client using admin component option, for connecting some application with database on remote server. Now, after I have developed some basic map using Oracle 10g Express on my home PC, I want to test it in my office network. But everytime I tried to install Oracle Express, it web interface will working normally while all other aplication can no longer connected with remote server from the client. If I remove Oracle Express, all client connection will working again as if nothing happened. I already created Microsoft LoopBack connection using IP 10.10.10.10, edit TNSNAMES.ORA, etc that could possibly helpful but nothing fixed. Strangely, if I install Oracle 10g Database version, all connection to remote server working again, and map application also working. But this kind of installation takes up all my PC resources (grrrr!). Any more suggestion?
best regards
net2surfin

I'm sorry if the information not accurate, but the client connection made by application which try to connect is simply "not resolved" and show no error code/number at all. I'll try to connect from sqlplus though, maybe the error number will be known from this way.
About 10.10.10.10 tcp loopback, I got this work around from here: http://download.oracle.com/docs/cd/B19306_01/install.102/b14316/reqs.htm#BABGCEAI
in the Ora Database Preinstallation requirement, where it states like this:
+16.In the Properties dialog box, click Use the following IP address and do the following:+
a.IP Address: Enter a non-routable IP for the loopback adapter. Oracle recommends the following non-routable addresses:
+■192.168.x.x (x is any value between 0 and 255)+
+■10.10.10.10+ <---- this is the value suggested that I've been used in my home PC
b.Subnet mask: Enter 255.255.255.0.
c.Record the values you entered, which you will need later in this procedure.
d.Leave all other fields empty.
e.Click OK.
I'll try to remove the loopback later and see the ORA environment, to see the result. In the mean time, all suggestions is highly appreciated.
thank you n best regards
net2surfin

Oracle 10g Express Installation

Please help with installing Oracle 10g Express. These are the steps I've done:
1. Click "Oracle Database 10g Express Edition for Microsoft Windows"
2. Click "Oracle Database 10g Express Edition (Western European)
OracleXE.exe (165,332,312 bytes)
Single-byte LATIN1 database for Western European language storage, with the Database Homepage user interface in English only."
3. Log in with my email and password I created
4. File Download window appears and has the options to "Find" or "Save"
Clicking "Find" opens the following web page:
"Windows has the following information about this MIME type. This page will help you find software needed to open your file.
MIME Type: application/x-msdownload
Description: UnKnown
Windows does not recognize this MIME type.
You can search the following Web site for related software and information:
Windows Live Search
Have questions? See these Frequently Asked Questions."
Clicking "Save" - I save to desktop or documents, it saves and then opens the same web page.
Please help, I'm a college student thats just trying to get more practice with Oracle outside of class.
Thanks!

It seems the file is download without extension .exe. Because of this Windows does not know how to open it. Rename the downloaded file to OracleXE.exe and try again.

Install Oracle 9i client on a computer with Oracle 10g Client

Hello all!!
I'm using a computer with Oracle 10g client, and I access two databases. One server has Oracle 10g server, and the other server has Oracle 9i server.
I want to install 9i client, to have it also in my computer. I haver read that I just have to install it in a different ORACLE_HOME, but I have a doubt.
If I install 9i client, would I be able to use the utilities, (exp, expddp, sqlldr) of both versions, or which version will be used in the command line for the utilities.
Thanks a lot!!!

To start with, Home Selector is a "9i thing" (and older), in 10g there's the OUI -> Installed Products... -> Environment tab instead.
About the 9i dbca with other Oracle products installed. If you use launch.exe to start via dbca start menu shortcut, it uses ora92\assistants\dbca as working directory ("start from"). So when not looking for "numbered dlls" like oracore9.dll, a later/different version will be loaded if earlier in path, since loading goes through jre directories, ora92\assistants\dbca, then the dir's from path variable. From there it may start to link in libraries from different homes (on my laptop, "launch.exe dbca" uses files from 2 additional home paths!)
But, if you instead use dbca.bat started from ora92\bin, it will look in the right directories first and there's no dll mess-up. (But only when using the correct cwd!)
Plain and simple: stay very far away from multiple-general-home installs. It is possible to install allright, in different homes and all very nicely, but there will be pain when you decide to use the stuff (perhaps with sql*plus as the only exception, but I've run into bugs with that too).
Message was edited by:
orafad

Oracle 10g Client

We are having difficulty getting the Oracle 10g client working for some users. The client installs fine, and works when we are logged in as an administrator, but not as the normal users.
The Oracle Client and our applications are installed on a Citrix Metaframe server (thin client server) running Windows 2003 Server. We install the Oracle client (10.2.0.1.0) on the C: drive, which is hidden from the end users. We then grant permissions to the Oracle directory on the C: drive for them to access the oracle client.
After we install, grant permissions, check environment variables and registry settings, we run Sql Plus to check that we can connect to the database. This all works fine when logged in as an admin ( as do our applications ). But when we try to run SqlPlus as a normal user, we get the login screen, and as soon as we try to connect, the program crashes.
If I run a batch file to try to login to the dos version of SqlPlus, I receive the error:
SP2-1503: Unable to initialize Oracle call interface
SP2-0152: ORACLE may not be functioning properly
I have only found a couple of references to these errors, suggesting that the ORACLE_HOME path must not contain a \ backslash at the end of the path. But this is not the problem.
I even tried refreshing permissions to the registry itself, but that didn't help. I'm really not sure at what point the client is not working, so I'm having trouble debugging.
Any suggestions?

We have run across this problem as well and granting 'Create Global Objects' solves it. However, our Windows administrators are resisting implementing it on production servers, saying it's potential security risk.
Has anyone run across this resistance in their shops and been able to overcome it? I can't find any good documentation that will allay the fears of the Windows groups. Their resisting this change is holding up a project.
Thanks,
Paul

Oracle 10g client installation process step by step

Similar Messages

Maybe you are looking for