Oracle 10g consumes a lot of ram

hello everyone,
i'm a newbie to oracle,
can someone solve my problem
when oracle database is running , i can't run any other applications (on windows)
task manager shows around 100 mb memory usage for oracle
is there any solution to this problem...

one solution can be:
-add more memory to your XP Pro: 2GB and more
-install a blank Virtual Machine [vmware.com] on your XP as a host
-on the Virtual Machine install the guest OS: say Win Server 2003 [u can get it free from MSoft site], configure the Virtual Server as Active Directory, DNS, Server, DHCP Server. Use Static IP for the server.
-install Oracle 10g on the Virtual server
I did the same on my XP Pro system and Oracle 10g EE runs OK on it. My CPU is 2 GHz.

Similar Messages

WhatsApp on E72 consuming a lot of RAM

I have observed that WhatsApp consumes a lot of RAM on my E72. So much so that I can't even use Maps or browse heavy pages. To free up the RAM, I need to switch it off but even though I exit the program, it still is running in back ground and consuming the RAM.
Is there any way that I can close this program ? Currently I am using NetQin to close it but its a very lengthy process.
Also if any of you are using an equally good program kindly inform so that I can switch over.
Using Nokia Lumia 1320.
Also have Nokia E72 & Nokia N8.

anyone with appropriate response?!!
Using Nokia Lumia 1320.
Also have Nokia E72 & Nokia N8.

Why Firefox Has Spikes In CPU Usage And Consumes A Lot Of RAM Since Security Update?

After applying security update 3.6.18 i started having this problem. I had this problem earlier but it only happened after several days Firefox was opened constantly. Now i have this problem several hours later after launching Firefox.
[http://i.stack.imgur.com/PJmH5.png '''Here is a picture of high RAM usage''']
'''[http://i.stack.imgur.com/tjsqt.png Here is a picture of high RAM and CPU usage]'''
I have Flash disabled.
What is going on? Should i reinstall Firefox 3.6.18?

Have you any particular reason for using an older version of Firefox.
Whilst I rarely use firefox 3.6 now, and do not know the answer I will comment that the now unsupported firefox 4 did have bad memory problems in some cases. Some of those problems were addressed in firefox 5, and others are addressed in Firefox 7, which is due out on the Aurora channel next week.
You could consider upgrading to a newer version of firefox. If you need firefox3.6 only for limited use you could consider using Firefox portable, alongside a newer version of Firefox.
* portable: http://portableapps.com/apps/internet/firefox_portable/localization#legacy36
* see also
**[[installing a previous version of firefox]]
**[[high memory usage]]
**[[firefox consumes a lot of CPU resources]]

Why Firefox 5.0 Still Consumes A Lot Of RAM?

Contrary to many statements that Firefox 5.0 is RAM optimized and uses less, i still have Firefox eating '''[http://i.stack.imgur.com/i1AgT.png almost ~800MB of RAM and mapping more]'''.
I used command:
''about:memory''
And was presented with a modules/extension tree and i don't understand what each means. Does anybody here have experience or knowledge about this here who could tell me where may be the problem?

Have you any particular reason for using an older version of Firefox.
Whilst I rarely use firefox 3.6 now, and do not know the answer I will comment that the now unsupported firefox 4 did have bad memory problems in some cases. Some of those problems were addressed in firefox 5, and others are addressed in Firefox 7, which is due out on the Aurora channel next week.
You could consider upgrading to a newer version of firefox. If you need firefox3.6 only for limited use you could consider using Firefox portable, alongside a newer version of Firefox.
* portable: http://portableapps.com/apps/internet/firefox_portable/localization#legacy36
* see also
**[[installing a previous version of firefox]]
**[[high memory usage]]
**[[firefox consumes a lot of CPU resources]]

WmiPrvSE.exe Consuming A Lot of RAM on 2012R2 DCs with SCOM Agent

Good afternoon,
I have three Windows Server 2012 R2 Domain controllers (AD DS, DNS, and DFS roles) and I'm running SCOM 2012 R2 Update Rollup 1 with all the latest management packs for Server 2012 R2, Active Directory, DNS, and DFS.
When I install SCOM agents on these DCs, a WmiPrvSE process starts consuming a lot of memory until it reaches around 512MB. At that point no one can RDP to the DCs, but we can enter-possession to get-process | sort ws and kill the offending WmiPrvSE.exe
process. When I uninstall the SCOM agent the server returns to normal.
Other Windows Server 2012 R2 servers in our environment don't have this problem.  And when we had Windows Server 2012 (no R2) domain controllers this wasn't an issue. My assumption is one of the management packs are an issue.
I've seen other posts, but they are either related to older versions of Windows Server or not domain controllers.
These are all the features I have installed on the DCs:
Active Directory Domain Services
DNS Server
File and Storage Services
File and iSCSI Services
File Server
DFS Namespaces
DFS Replication
File Server Resource Manager
Storage Services
.NET Framework 3.5 Features
.NET Framework 3.5 (includes .NET 2.0 and 3.0)
.NET Framework 4.5 Features
.NET Framework 4.5
WCF Services
TCP Port Sharing
Group Policy Management
Remote Differential Compression
Remote Server Administration Tools
Role Administration Tools
AD DS and AD LDS Tools
Active Directory module for Windows PowerShell
AD DS Tools
Active Directory Administrative Center
AD DS Snap-Ins and Command-Line Tools
DNS Server Tools
File Services Tools
DFS Management Tools
File Server Resource Manager Tools
SMB 1.0/CIFS File Sharing Support
User Interfaces and Infrastructure
Graphical Management Tools and Infrastructure
Server Graphical Shell
Windows PowerShell
Windows PowerShell 4.0
Windows PowerShell 2.0 Engine
Windows PowerShell ISE
Windows Server Backup
WoW64 Support

I have ever seen somebody has similar problem when import DNS MP to DC. Check whether it is this situation.
Otherwise, Open Event Viewer to see if there are any useful info there.
Last, apply the Hotfix below.
http://support.microsoft.com/kb/2919355
Juke Chou
TechNet Community Support

PS CS4 consumes a lot more RAM than CS3

I recently updated from Photoshop CS3 to Photoshop CS4 and now I have the problem that CS4 is consuming very much RAM.
When I open the same image on both versions CS4 consumes like four times as much RAM as CS3 does.
Settings are identical on both versions, so I don't quite know how this can be.

TheARchitect2009 wrote:
As an example: In idle, without any file loaded, CS3 uses around 90MB while CS4 uses 380MB.
I don't run CS4 on Windows (just CS3) so I can't say whether is this normal behavior. That sadly may be simple application bloat. I was also shocked to see Vista using 1 GB of RAM when idle and without running apps.
Make sure your RAM allocation and history state settings are consistent between the versions.

Photoshop CS5 consumes a lot of RAM

Hi,
While using Adobe Photoshop CS5, I am suffering of RAM loss, it consumes around 2.5 GB of my RAM, while Adobe Illustrator CS5 consumes around 500 MB of RAM.
Is this normal or I have to do something to minimize memory usage with Photoshop?

By default, Photoshop uses 70% of available RAM. The more RAM available to Photoshop, the faster Photoshop can process image information.
You can adjust here:
Choose Photoshop > Preferences > Performance...adjust in 5% increments...restart Photoshop after each change.
You really should Max out your computer, if you want the best performance, before messing with Photoshop.

Oracle 10g Using 99% of 7GB RAM on Solaris10

Hi All,
I am working on three database instances each installed on a single solaris server. Now, the server had 3GB of RAM and all the dbs were up and running fine. However, 95% of RAM was getting utilized so we went for RAM upgradation frm 3 to 7GB. To my utter amazment the Ora10g user is still shown to be using 99% of current memory. Ideally I should be having atleast 30% of the current memory free.
Please advice how can i reduce this excess RAM usage by Ora10g user.
This is a shared server env for all the three dbs.

I tihnk you're counting the memory wrong.
If, for example, from top, you see a process is using, let's say 700M. Now, let's assume that the SGA is 500m. That 700m being reported includes the 500m shared memory segment.
So, if you have 10 processes, each reporting 700m, that's 7000m, but, in reality, they're only using 200m*10+500m = 2500m. The shared memory segment(s) should only be counted once.
In Solaris, to see how much memory is allocated/mapped where for a given process, try the pmap command.
pmap -x <pid of process>This will show how the memory for that process breaks out, including what portion is the shared memory segment.
As to why you're getting errors when trying to allocate additional memory, well, it could be that you're really out of memory, or it could be that you're being artificially limited, by some O/S parameter, SHMMAX, etc.
Finally, see MetaLink Doc IDs 115753.1 and 1008866.6 for more information.
-Mark

SQL Developer consumes a lot of memory

Sql developer consumes a lot of RAM (around 100 MB) few minutes after start of application . any tips to reduce this?

This is usually due to the caching of database objects on support of code insight and is dependent on the number of objects in the database. As documented in the readme.txt in the sqldeveloper home directory, you can disable code insight.
2.1 To disable Code Insight
Run SQL Developer from a command line using the following statement:
Windows : sqldeveloper -J-Dsdev.insight=false
Linux or Mac: Run sh sqldeveloper -J-Dsdev.insight=false
or edit sqldeveloper.conf and add "AddVMOption -J-Dsdev.insight=false"

Oracle.exe consuming lots of memory

hi
i am using Oracle 10g release2
after installation, when i'm booting my system (Windows XP) it takes a lot of time to finish all the files to load. when i inspected the task manager, there were 2 instances or oracle.exe running each consuming approximately 200,000K each. i feel like this particular thing is slowing down the system. what are ur suggestions please ? if actually its the problem, what is the solution u propose ?

user10434417 wrote:
there are 2 databases running and i've 2GB RAM in my system2gb RAM is awefully lesser compared to the current version's requirements of oracle. Also, I believe you must have not modified the sga/pga settings as well since the default values are very high. I would suggest that you try to check the sga/pga sizes and reduce them to the minimum which is 160MB for the SGA and 91MB for PGA if these databases are merely for testing/learning.
HTH
Aman....

Lots of Inactive perl sessions in Oracle 10g r2 on Debian Linux 64 bit

Hi,
There are lots of Inactive perl session in Oracle 10g release 2 10.2.0.3.0 on Debian Linux 64 bit, is it normal
ps aux|grep oracle is showing following in processes of perl
/home/u01/app/oracle/product/10.2.0/database1/perl/bin/perl /home/u01/app/oracle/product/10.2.0/database1 /sysman/admin/scripts/db/dbarchfull.pl

Hi,
There are lots of Inactive perl session in Oracle 10g release 2 10.2.0.3.0 on Debian Linux 64 bit, is it normal
ps aux|grep oracle is showing following in processes of perl
/home/u01/app/oracle/product/10.2.0/database1/perl/bin/perl /home/u01/app/oracle/product/10.2.0/database1 /sysman/admin/scripts/db/dbarchfull.pl

Oracle 10g problem on win 2000 server!!

Hi,
I have installed oracle 10g on win 2000 server with service pack 4 to my home machine but the problem I am facing is that when I start my db on the system my system gets slow it consumes most of the Ram.I alter few SGA parameters in init.ora file but the problem continues to be effect me.I need to get around that problem asap hope you guys help me as u did in past....
thanks a lot...

Hi,
It's 128MB should i expand it? or what abt oracle 9i if i uninstall of oralce 10g.act I was earlier using oralce 9i.I would like to know that all the commands which used to support to oracle 9i will it support completly to 10g.
thanks a lot..

Oracle 10G New Feature........Part 1

Dear all,
from last couple of days i was very busy with my oracle 10g box,so i think this is right time to
share some intresting feature on 10g and some internal stuff with all of you.
Have a look :-
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Oracle 10g Memory and Storage Feature.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1.Automatic Memory Management.
2.Online Segment Shrink
3.Redolog Advisor, checkpointing
4.Multiple Temporary tablespace.
5.Automatic Workload Repository
6.Active Session History
7.Misc
a)Rename Tablespace
b)Bigfile tablespace
c)flushing buffer cache
8.ORACLE INTERNAL
a)undocumented parameter (_log_blocks_during_backup)
b)X$ view (x$messages view)
c)Internal Structure of Controlfile
1.Automatic memory management
================================
This feature reduce the overhead of oracle DBA.previously mostly time we need to set diff oracle SGA parameter for
better performance with the help of own experience,advice views and by monitoring the behaviour
of oracle database.
this was just time consuming activity.........
Now this feature makes easy life for oracle DBA.
Just set SGA_TARGET parameter and it automatically allocate memory to different SGA parameter.
it focus on DB_CACHE_SIZE
SHARED_POOL_SIZE
LARGE_POOL
JAVA_POOL
and automatically set it as
__db_cache_size
__shared_pool_size
__large_pool_size
__java_pool_size
check it in alert_log
MMAN(memory manager) process is new in 10g and this is responsible for sga tuning task.
it automatically increase and decrease the SGA parameters value as per the requirement.
Benefit:- Maximum utlization of available SGA memory.
2.Online Segment Shrink.
==========================
hmmmmm again a new feature by oracle to reduce the downtime.Now oracle mainly focus on availablity
thats why its always try to reduce the downtime by intrducing new feature.
in previous version ,reducing High water mark of table was possible by
Exp/imp
or
alter table move....cmd. but on these method tables was not available for normal use for long hrs if it has more data.
but in 10g with just few command we can reduce the HWmark of table.
this feature is available for ASSM tablespaces.
1.alter table emp enable row movement.
2.alter table emp shrink space.
the second cmd have two phases
first phase is to compact the segment and in this phase DML operations are allowed.
second phase(shrink phase)oracle shrink the HWM of table, DML operation will be blocked at that time for short duration.
So if want to shrink the HWM of table then we should use it with two diff command
first compact the segment and then shrink it on non-peak hrs.
alter table emp shrink space compact. (This cmd doesn't block the DML operation.)
and alter table emp shrink space. (This cmd should be on non-peak hrs.)
Benefit:- better full table scan.
3.Redolog Advisor and checkpointing
================================================================
now oracle will suggest the size of redo log file by V$INSTANCE_RECOVERY
SELECT OPTIMAL_LOGFILE_SIZE
FROM V$INSTANCE_RECOVERY
this value is influence with the value of FAST_START_MTTR_TARGET .
Checkpointing
Automatic checkpointing will be enable after setting FAST_START_MTTR_TARGET to non-zero value.
4.Multiple Temporary tablespace.
==================================
Now we can manage multiple temp tablespace under one group.
we can create a tablespace group implicitly when we include the TABLESPACE GROUP clause in the CREATE TEMPORARY TABLESPACE or ALTER TABLESPACE statement and the specified tablespace group does not currently exist.
For example, if group1 is not exists,then the following statements create this groups with new tablespace
CREATE TEMPORARY TABLESPACE temp1 TEMPFILE '/u02/oracle/data/temp01.dbf'
SIZE 50M
TABLESPACE GROUP group1;
--Add Existing temp tablespace into group by
alter tablespace temp2 tablespace group group1.
--we can also assign the temp tablespace group on database level as default temp tablespace.
ALTER DATABASE <db name> DEFAULT TEMPORARY TABLESPACE group1;
benefit:- Better I/O
One sql can use more then one temp tablespace
5.AWR(Automatic Workload Repository):-
================================== AWR is built in Repository and Central point of Oracle 10g.Oracle self managing activities
is fully dependent on AWR.by default after 1 hr, oracle capure all database uses information and store in AWR with the help of
MMON process.we called it Memory monitor process.and all these information are kept upto 7 days(default) and after that it automatically purge.
we can generate a AWR report by
SQL> @?/rdbms/admin/awrrpt
Just like statspack report but its a advance and diff version of statspack,it provide more information of Database as well as OS.
it show report in Html and Text format.
we can also take manually snapshot for AWR by
BEGIN
DBMS_WORKLOAD_REPOSITORY.CREATE_SNAPSHOT ();
END;
**The STATISTICS_LEVEL initialization parameter must be set to the TYPICAL or ALL to enable the Automatic Workload Repository.
[oracle@RMSORA1 oracle]$ sqlplus / as sysdba
SQL*Plus: Release 10.1.0.2.0 - Production on Fri Mar 17 10:37:22 2006
Copyright (c) 1982, 2004, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> @?/rdbms/admin/awrrpt
Current Instance
~~~~~~~~~~~~~~~~
DB Id DB Name Inst Num Instance
4174002554 RMSORA 1 rmsora
Specify the Report Type
~~~~~~~~~~~~~~~~~~~~~~~
Would you like an HTML report, or a plain text report?
Enter 'html' for an HTML report, or 'text' for plain text
Defaults to 'html'
Enter value for report_type: text
Type Specified: text
Instances in this Workload Repository schema
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DB Id Inst Num DB Name Instance Host
* 4174002554 1 RMSORA rmsora RMSORA1
Using 4174002554 for database Id
Using 1 for instance number
Specify the number of days of snapshots to choose from
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Entering the number of days (n) will result in the most recent
(n) days of snapshots being listed. Pressing <return> without
specifying a number lists all completed snapshots.
Listing the last 3 days of Completed Snapshots
Snap
Instance DB Name Snap Id Snap Started Level
rmsora RMSORA 16186 16 Mar 2006 17:33 1
16187 16 Mar 2006 18:00 1
16206 17 Mar 2006 03:30 1
16207 17 Mar 2006 04:00 1
16208 17 Mar 2006 04:30 1
16209 17 Mar 2006 05:00 1
16210 17 Mar 2006 05:31 1
16211 17 Mar 2006 06:00 1
16212 17 Mar 2006 06:30 1
16213 17 Mar 2006 07:00 1
16214 17 Mar 2006 07:30 1
16215 17 Mar 2006 08:01 1
16216 17 Mar 2006 08:30 1
16217 17 Mar 2006 09:00 1
Specify the Begin and End Snapshot Ids
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Enter value for begin_snap: 16216
Begin Snapshot Id specified: 16216
Enter value for end_snap: 16217
End Snapshot Id specified: 16217
Specify the Report Name
~~~~~~~~~~~~~~~~~~~~~~~
The default report file name is awrrpt_1_16216_16217.txt. To use this name,
press <return> to continue, otherwise enter an alternative.
Benefit:- Now DBA have more free time to play games.....................:-)
Advance version of statspack
more DB and OS information with self managing capabilty
New Automatic alert and database advisor with the help of AWR.
6.Active Session History:-
==========================
V$active_session_history is view that contain the recent session history.
the memory for ASH is comes from SGA and it can't more then 5% of Shared pool.
So we can get latest and active session report from v$active_session_history view and also get histortical data of
of session from DBA_HIST_ACTIVE_SESS_HISTORY.
v$active_session_history include some imp column like:-
~SQL identifier of SQL statement
~Object number, file number, and block number
~Wait event identifier and parameters
~Session identifier and session serial number
~Module and action name
~Client identifier of the session
7.Misc:-
========
Rename Tablespace:-
=================
in 10g,we can even rename a tablespace by
alter tablespace <tb_name> rename to <tb_name_new>;
This command will update the controlfile,data dictionary and datafile header,but dbf filename will be same.
**we can't rename system and sysaux tablespace.
Bigfile tablespace:-
====================
Bigfile tablespace contain only one datafile.
A bigfile tablespace with 8K blocks can contain a 32 terabyte datafile.
Bigfile tablespaces are supported only for locally managed tablespaces with automatic segment-space management.
we can take the advantage of bigfile tablespace when we are using ASM or other logical volume with RAID.
without ASM or RAID ,it gives poor response.
syntax:-
CREATE BIGFILE TABLESPACE bigtbs
Flushing Buffer Cache:-
======================
This option is same as flushing the shared pool,but only available with 10g.
but i don't know, whats the use of this command in prod database......
anyway we can check and try it on test server for tuning n testing some query etc....
SQL> alter system flush buffer_cache;
System altered.
++++++++++++++++++
8.Oracle Internal
++++++++++++++++++
Here is some stuff that is not related with 10g but have some intresting things.
a)undocumented parameter "_log_blocks_during_backup"
++++++++++++++++++++++++
as we know that oracle has generate more redo logs during hotbackup mode because
oracle has to maintain the a complete copy of block into redolog due to split block.
we can also change this behaviour by setting this parameter to False.
If Oracle block size equals the operating system block size.thus reducing the amount of redo generated
during a hot backup.
WITHOUT ORACLE SUPPORT DON'T SET IT ON PROD DATABASE.THIS DOCUMENT IS JUST FOR INFORMATIONAL PURPOSE.
b)some X$ views (X$messages)
++++++++++++++++
if you are intresting in oracle internal architecture then x$ view is right place for getting some intresting things.
X$messages :-it show all the actions that a background process do.
select * from x$messages;
like:-
lock memory at startup MMAN
Memory Management MMAN
Handle sga_target resize MMAN
Reset advisory pool when advisory turned ON MMAN
Complete deferred initialization of components MMAN
lock memory timeout action MMAN
tune undo retention MMNL
MMNL Periodic MQL Selector MMNL
ASH Sampler (KEWA) MMNL
MMON SWRF Raw Metrics Capture MMNL
reload failed KSPD callbacks MMON
SGA memory tuning MMON
background recovery area alert action MMON
Flashback Marker MMON
tablespace alert monitor MMON
Open/close flashback thread RVWR
RVWR IO's RVWR
kfcl instance recovery SMON
c)Internal Structure of Controlfile
++++++++++++++++++++++++++++++++++++
The contents of the current controlfile can be dumped in text form.
Dump Level Dump Contains
1 only the file header
2 just the file header, the database info record, and checkpoint progress records
3 all record types, but just the earliest and latest records for circular reuse record types
4 as above, but includes the 4 most recent records for circular reuse record types
5+ as above, but the number of circular reuse records included doubles with each level
the session must be connected AS SYSDBA
alter session set events 'immediate trace name controlf level 5';
This dump show lots of intresting information.
it also show rman recordes if we used this controlfile in rman backup.
Thanks
Kuljeet Pal Singh

You can find each doc in html and pdf format on the Documentation Library<br>
You can too download all the documentation in html format to have all on your own computer here (445.8MB)<br>
<br>
Nicolas.

Netweaver 2004s installation problem on Windows: Oracle 10G

Hi Friends,
I would like to install Netweaver 2004S(with usage types AS ABAP, AS JAVA, BI, BI JAVA, EP & DI) on a server which has Windows 2003 server OS running on it.
The server has 6GB RAM and has 5GB of free space on C: and a free sapce of 60GB on H: & 50GB on I: respectively.The database that is to be used is Oracle 10g.
Do I need to install first SAP solution manger 4.0 on this or Can i proceed with Netweaver 2004 S installation???
I am installing a central system.
First I tried installing SAP solution manger 4.0 on this system and it went successfully. Now when i am installing Netweaver 2004s on the same machine, during installation I am asked whether to "install a MCOD or create a new database for this installation".
I chose Install MCOD and proceeded further with Installation. But my installation is taking a lot of time while executing the service :"Creating database schema". The message which i get on status bar is " Removing schema user SAPSR3" and the status remains the same.
Have any of you faced this problem ? Please let me know how you have proceeded further.
Before starting the installation one of the prerequisites " SWAP SPACE VALUES" for installation was not satisfied by my system and even then i proceeded with the installation.
Is it because of this SWAP space problem , my intsallation is strcuk?? or what could be the reason fo this?
Thanks
Diwakar

Hello Diwakar,
If you are just installing NW2004s then it is not mandatory to install Solution manager.
To increase the swap space --
Right click my on computer ->Select Properties -> Click Advanced Tab ->Click Settings (performance) -> Select Advanced Tab -> In virtual memory -> Change
you canIncrease swap space/page file here.
Do not install the system as MCOD, make the seperate database.
Do revert for further doubt.
Best Regards,
Sachin.

Is the SQL * Plus Worksheet included in the Oracle 10g Express Edition?

Hello All,
I need to install Oracle 10g for a SQL class that I will be taking this year. I will be installing it in my laptop (Pentium 4, 1GB RAM). I was told by the Professor that I needed to have the SQL*Plus Worksheet. I would like to know which version of Oracle do I need to install, and If it includes the SQL*Plus Worksheet.
This is my first time working & installing Oracle, so I would appreciate if anyone could guide me thru this process.
Thanks a lot,
Ed

No, it is not included.
However, the same functionality, and more, is in Oracle SQL Developer - also available free and download-able from the same area as Oracle Express Edition.
Ask your prof why he want Worksheet. If it's only for the ability to scroll and correct previous SQL (eg: easier time correcting mistakes), and loading scripts, ask if SQL Developer would be allowed. It's much superior and allows you to use XE, which will not sink your laptop like the EE version will.

Oracle 10g consumes a lot of ram

Similar Messages

Maybe you are looking for