Oracle 10g Database Hanging twice a day
My database server has 10g with MS 2003 server as OS.
Twice a day the database hangs and does disconnects all the users from local and remote locations.
Current SYSTEM tablespace has a size of 470 MB and is 98.86 in use, when I try to add another datafile as 'SYSTEM02.DBF' in the same path where other system data files are, I kept this operation running during weekends but datafile was not added.
Has it anything to do with the MS 2003 server no. of users.
Any other suggestions for SYSTEM Tablespace to be free.
Please reply.
Thanks
Ajaz Ahmed
Hi friends / sameer,
Sorry for the delay. Here is the attached alert.log file Since the data from foxpro was loaded into oracle on to oracle 10 g from 7th may the problem of database hanging started from the next day. I joined the organization on 22nd july.
Current SYSTEM tablespace has a size of 470 MB and is 98.86 in use, when I try to add another datafile as 'SYSTEM02.DBF' in the same path where other system data file is, it does not add. I kept this operation running during weekends but datafile was not added.
Has it anything to do with the MS 2003 server no. of users.
Any other suggestions for SYSTEM Tablespace to be free.
If you can get me your mail id then I can send the
attachment of alert.log file as [email protected] bounces back.
Thanks
Ajaz Ahmed
Similar Messages
-
Oracle 10g database growing day by day
Oracle 10g database
database is growing day by day. I would like to know what is inserting into database
Can you please let me knowNeeraj Bhatia wrote:
DBA_TAB_MODIFICATIONS. Monitoring should be enabled for the tables.Just a correction Neeraj, if its 10g or above, the monitoring clause for the tables is actually deprecated and the default monitoring is on out of the box. Please see,
http://download.oracle.com/docs/cd/B14117_01/server.101/b10739/tables.htm#sthref1903
Aman.... -
Oracle 10g - Database does not respond to the application users
Hi all,
I am using ORACLE 10g database with 75 users connections 50 local and 20 remote users using ADSL and dial up modem. Operating system on server is
Windows 2003.
All of a sudden users making the entry get disconnected getting the error as
ORA-12516: TNS:listener could not find available handler with matching protocol stack
Other case users when using the appliaction get their PC hanged and connection
to oracle fails again. they cannot login to the application that time, the error is
ORA-04031: unable to allocate %s bytes of shared memory ("%s","%s","%s","%s")
Twice a day the users trying to login cannot access the database server.
Front end application is in VB using exe file. When the users cannot logon
to the database. I manually stop the ORACLE services(including DB console) and
then stop the listener.
This practice is going on since last two months.
Server Scenario
After Installing Oracle Standard Edition 10g.
System tablespace utilization is 98.5% which is 465 MB out of total 470 MB.
There is only one Rollback Segment named as SYSTEM.
when we install 9i 4 rollback segments as RO1, RO2, RO3, RO4 are created
by default.
Do I need to add the datafile to SYSTEM table space as its current usage is 99.15% and its auto extend is ticked on using auto extent as 10 MB. I tried adding another datafile during weekend downtime. when I resumed on saturday morning I found it did not add any datafile which I had put on thursday eveninig as system02.dbf.
Do I need to add a new datafile to the SYSTEM tablespace ?
Do I need to create new rollback segments apart from SYSTEM rollback segment ?
My current schema size 15360Mb with its usage as 9.32% (1432.25 Mb).
Please reply !!!Hi Paul
My Server configuration is
Compaq ML 370
3.4 Ghz Processor
3.5 GB RAM
SQL> show sga
Total System Global Area 171966464 bytes
Fixed Size 787988 bytes
Variable Size 145488364 bytes
Database Buffers 25165824 bytes
Redo Buffers 524288 bytes
SQL> select * from v$sgastat;
POOL NAME BYTES
fixed_sga 787988
buffer_cache 25165824
log_buffer 524288
shared pool subheap 55600
shared pool KQR L SO 218160
shared pool KQR M PO 1329244
shared pool KQR M SO 605364
shared pool KQR S PO 164156
shared pool KQR S SO 6144
shared pool KTI-UNDO 1235304
shared pool sql area 5368208
shared pool KGLS heap 1597560
shared pool joxs heap 6004
shared pool row cache 3707272
shared pool parameters 17520
shared pool repository 19396
shared pool ASH buffers 4194304
shared pool free memory 16586072
shared pool PL/SQL DIANA 679456
shared pool KSPD key heap 4220
shared pool PL/SQL MPCODE 1167992
shared pool library cache 11368964
shared pool miscellaneous 25942980
shared pool pl/sql source 88
shared pool PLS non-lib hp 29816
shared pool XDB Schema Cac 3594144
shared pool alert threshol 3460
shared pool joxlod exec hp 355820
shared pool table definiti 5880
shared pool temporary tabl 4932
shared pool trigger defini 12848
shared pool trigger inform 1892
shared pool type object de 20256
shared pool private strands 1198080
shared pool event statistics per sess 4384640
shared pool fixed allocation callback 304
large pool free memory 8388608
java pool joxs heap 233856
java pool free memory 44743296
java pool joxlod exec hp 5354496
40 rows selected.
SQL> select segment_name, owner, status
2 from dba_rollback_segs;
SEGMENT_NAME OWNER STATUS
SYSTEM SYS ONLINE
_SYSSMU1$ PUBLIC ONLINE
_SYSSMU2$ PUBLIC ONLINE
_SYSSMU3$ PUBLIC ONLINE
_SYSSMU4$ PUBLIC ONLINE
_SYSSMU5$ PUBLIC ONLINE
_SYSSMU6$ PUBLIC ONLINE
_SYSSMU7$ PUBLIC ONLINE
_SYSSMU8$ PUBLIC ONLINE
_SYSSMU9$ PUBLIC ONLINE
_SYSSMU10$ PUBLIC ONLINE
SEGMENT_NAME OWNER STATUS
_SYSSMU11$ PUBLIC ONLINE
_SYSSMU12$ PUBLIC ONLINE
_SYSSMU13$ PUBLIC ONLINE
_SYSSMU14$ PUBLIC ONLINE
_SYSSMU15$ PUBLIC OFFLINE
_SYSSMU16$ PUBLIC OFFLINE
_SYSSMU17$ PUBLIC OFFLINE
_SYSSMU18$ PUBLIC OFFLINE
_SYSSMU19$ PUBLIC OFFLINE
_SYSSMU20$ PUBLIC OFFLINE
_SYSSMU21$ PUBLIC OFFLINE
SEGMENT_NAME OWNER STATUS
_SYSSMU22$ PUBLIC OFFLINE
_SYSSMU23$ PUBLIC OFFLINE
_SYSSMU24$ PUBLIC OFFLINE
_SYSSMU25$ PUBLIC OFFLINE
_SYSSMU26$ PUBLIC OFFLINE
27 rows selected.
Currently AUTOEXTEND is ticked as on for SYSTEM tablespace and its size is showing as 99.16% (466.06 mb) used which is very much nearing to its full capacity of 470 mb.
Currently 75 users - 50 Local users and 20 Remote Users are connected to the server. Is there any limit that Server should have limited connections.
Server has Windows 2003 Standard Edition. Has Windows 2003 anything to do
with the no. of users getting connected ? -
How to install Procedural Option in Oracle 10g Database express edition
When i try execute exec send_mail shows error ORA-00900: invalid SQL statement.
Error code shows "This error can occur if the Procedural Option is not installed "
How to install Procedural Option in Oracle 10g express edition
I'm using Oracle 10g Database express edition. Let me know how to run a procedure.I'm not sure of the meaning of ORA-00900 for Oracle XE but I think that PL/SQL is already installed by default according to the XE features list.
See the Oracle® Database Express Edition 2 Day Developer Guide about procedure call. -
Columns in oracle 10g database
How many maximum columns i can create in a table of oracle 10g database?
This is the twice today :
Max.No. of columns a table can have in oracle9i db.10g?
Why everyone ask the same question ?
Nicolas. -
Oracle 10g database homepage not working?
Oracle 10g database homepage not working?
Hi just i installed oracle database 10g express edition but after the restart the oracle database homepage wont open http://127.0.0.1:8080/apex that link always telling cannot display...
here i have posted lsnrctl status
pls help
thanks in advance
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY…
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ
ction
Start Date 25-SEP-2010 17:52:11
Uptime 0 days 1 hr. 28 min. 24 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File C:\oraclexe\app\oracle\product\10.2.0\se…
dmin\listener.ora
Listener Log File C:\oraclexe\app\oracle\product\10.2.0\se…
og\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIP…
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOS…
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfullyI had a problem of accessing Oracle 10g database homepage. After a couple of days of research and discussions with coworker we found a solution.
Here is the solution:
1. Find out your default browser.
2. Configure your default web browser to connect to the Oracle Database XE Database Home Page as stated
here:
http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25143/toc.htm#CIHHJEHF
If this does not help de-install Oracle XE and reinstall following the instruction. During re-installation find out your default browser and configure it as instructed.
I suspect when the default web browser changes the Oracle 10g XE Database Home Page stops working.
Good luck -
Problem Oracle 10g database Installation on Windows 2003 Server
Hi All,
I am trying to face some problem to install oracle 10g database on windows 2003 server with service pack 2. Once I start to installation it give me an error "Error in writing to directory 'c:\documents and settings\administrator\local settings\temp\orainstall2004xxx'. Please ensure that this directory is writable and has at least 45MB of disk space. Installation cannot continue"
I double-insured that there is enough disk-space and I am also in the Administrators-Group.
Please guide me for the above problem although I have done oracle 9i database installation with the same configuration.
Regards
Muhammad Shoaib898118 wrote:
Hi All,
I am trying to face some problem to install oracle 10g database on windows 2003 server with service pack 2. Once I start to installation it give me an error "Error in writing to directory 'c:\documents and settings\administrator\local settings\temp\orainstall2004xxx'. Please ensure that this directory is writable and has at least 45MB of disk space. Installation cannot continue"
I double-insured that there is enough disk-space and I am also in the Administrators-Group.
Please guide me for the above problem although I have done oracle 9i database installation with the same configuration.
Regards
Muhammad ShoaibOracle really doesn't like to be installed into directories with spaces in their names. -
How to configure Oracle Dataguard for Oracle 10g database
Hi Friends,
I would like to configuer Oracle Dataguard for my Oracle 10g Database.
Please provide me the configuration document.(step by step guide)
Regards,
DBHi
Go throw below link. This would be help to configure ODG..,
http://blogs.oracle.com/AlejandroVargas/2007/09/data_guard_physical_standby_im.html
http://blogs.oracle.com/AlejandroVargas/2007/10/data_guard_broker_observer_and.html
Thanks,
Mayilselvan.S -
Error executing a package on Oracle 10G database
Hi,
I've a package on Oracle 10G database which accepts xml string as input,loads it into XMLDOM and does some processing.
When I execute this package from .Net 2.0 client,I get the following error:
**Error**
err ORA-31011: XML parsing failed
ORA-19202: Error occurred in XML processing
LPX-00216: invalid character 0 (0x0)
Error at line 1
**Error**
But when I execute the same package from .Net client 2.0 on Oracle 9i database, it seems to work fine.The xml which I am sending is well-formed one.
Where am i going wrong?
Please help.
Thanks in advance...!
Regards,
AmitCheck the xml strings passed as input . One of the xmls may be malformed.
-
Problem in installation of Oracle 10g database on RHEL 6
I am facing the problem when I am trying to install Oracle 10g database on Red Hat 6. When ./runinstaller is run, the message seems to be if I remember correctly is like ‘……………bad ELF interpreter’. But, the same source seems to be installing correctly in Red Hat 5.
Please, help in solving the doubt.
RegardsHi;
1. Please make search before posting your issue here. Similar issue mention here million time
2. Please use certified platform such as *nix 5.x .
3. For can check certification from metalink or from below note:
Oracle Database on Unix AIX,HP-UX,Linux,Mac OS X,Solaris,Tru64 Unix Operating Systems Installation and Configuration Requirements Quick Reference (8.0.5 to 11.2) [ID 169706.1]
PS:Please dont forget to change thread status to answered if it possible when u belive your thread has been answered, it pretend to lose time of other forums user while they are searching open question which is not answered,thanks for understanding
Regard
Helios -
Installation of Oracle 10g Database on Windows Vista Home Basic
Hi All,
I'm confused about the possibility of installing Oracle 10g Database Server in Windows Home Basic Operating System with Service Pack 1. Please help me out with a confirmation.
Thanks in advance
PrasanthHi Prasanth
Yes that should be possible but is it a production database or just a test database.
you can always control that in metalink if it is supported, I don't believe it is.
Read that documentation to perform the installation.
http://download.oracle.com/docs/cd/B19306_01/install.102/b14316/toc.htm -
Win32 Oracle 10g Database Server Installation problems
Hello,
I have recently installed the Oracle 10g Database Server for Win32. The installation seemed to be successful. I used the Enterprise option and all the suggested defaults. Ihave the following services installed and started after the installation:
o OracleDBConsoleORCL [started]
o OracleOraDb10g_home1iSQL*Plus [started]
o OracleOraDb10g_home1SNMPPeerEncapsulator [manual]
o OracleOraDb10g_home1SNMPPeerMasterAgent [manual]
o OracleOraDb10g_home1TNSListener [started]
o OracleServiceORCL [started]
I have created the following files:
# LISTENER.ORA Network Configuration File: d:\oracle10gServer\network\admin\listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = asparuh)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = d:\oracle10gServer)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = ORCL)
(ORACLE_HOME = d:\oracle10gServer)
(SID_NAME = ORCL)
# TNSNAMES.ORA Network Configuration File: d:\oracle10gServer\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = asparuh)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ORCL)
INST1_HTTP =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = asparuh)(PORT = 1521))
(CONNECT_DATA =
(SERVER = SHARED)
(SERVICE_NAME = MODOSE)
(PRESENTATION = http://HRService)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
I go to the DOS console and type:
c:> sqlplus scott/tiger@ORCL
and I get:
ERROR: ORA-28000: the account is locked
I did this right after I restarted my computer.
When I use the Enterprise Manager at:
http://localhost:5500/em/
I get for ORCL:
Status: Status Pending
Status Pending Since: Unavailable
Seems that I can never get the database started properly?! When I press the Startup/Shutdown button I get:
Current Status: open
This is the correct current database status, although it doesnot match the current status in the sitemap page
What does this mean? Do you think this may contain the clue to the answer to this problem?
When I restart the Database I get the same status: unavailable.
I need your help to resolve this problem. The alternative is to revert back to Oracle 9i DB Server. Thank you in advance.
gkkI can help you with the SCOTT account being locked. Try:
sqlplus /nolog
connect / as sysdba
alter user scott identified by tiger account unlock; -
Errors in manual creation of oracle 10g database
I created oracle 10g database manually and i am getting post installation errors.. could you please help out?
I executed @?/sqlplus/admin/pupbld.sql but it still shows
Error accessing PRODUCT_USER_PROFILE
Warning: Product user profile information not loaded!
You may need to run PUPBLD.SQL as SYSTEM
i tried to see
SQL> desc product_user_profile;
ERROR:
ORA-04043: object "SYSTEM"."SQLPLUS_PRODUCT_PROFILE" does not exist
not there?? any other scripts to be run ? please guide me.
2. I can not able login sys@sid as sysdba
SQL> select * from v$pwfile_users;
no rows selected
i changed
remote_login_passwordfile string EXCLUSIVE
re-started db but no help...
SQL> grant sysdba to sys;
grant sysdba to sys
ERROR at line 1:
ORA-01990: error opening password file
I re-created
$ORACLE_HOME/bin/orapwd file=$ORACLE_HOME/dbs/orapwmydb.ora password=xxxx entries=5 force=y
but no help..
Could one please help out... ! great thanks in advance..thanks for prompt reply .. but still one issue remain..
oracle DEVS $ sqlplus sys@sid sysdba
SQL*Plus: Release 10.1.0.4.0 - Production on Thu Jan 7 10:51:44 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter password:
ERROR:
ORA-01031: insufficient privileges
but i can able to login as sqlplus sys as sysdba
SQL> select * From v$pwfile_users;
no rows selected
i tired to do
SQL> grant sysdba to sys;
grant sysdba to sys
ERROR at line 1:
ORA-01990: error opening password file
'/u02/app/oracle/product/10.1.0/dbs/orapw'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
there is already one password file with orapwsid.ora.. how this should be solved ? please help. thanks -
We are getting ¿ stored into our Oracle 10g database (Microsoft fault)
We are getting ¿ stored into our Oracle 10g database that is using WE8ISO8859P1 character set.
Problem is caused by the following:
Microsoft released software (in particularly MS Word) before considering any ANSI or ISO standard (although they claimed so).
At that time of pioneering graphical interface - they were the standard. Since then things changed. Microsoft initially targeted US marked, however very soon they wanted to expanded to Europe. For that they needed to get standardized character set instead of one initially being in use. Microsoft re-mapped character set in newer applications using Windows-1252 character set which is compatible with ISO-8851-1 (we are using in our Java Web applications). That cleared obstacles to forward on European market, where extended characters are necessary (like in French, Dutch, German languages...)
What happened with the initial character codes before Microsoft agreed with ISO to standardize characters? Well - Nothing.
So what are the consequences of that?
If we are using Microsoft Word document in conjunction with one of the oldest character set (universe) the ice-age character mapping is still there. So when we "cut and paste" the content to another application, characters sets are not mapped anymore. Especially French language "is sensitive to this" The Microsoft character set in Word decimally coded 146 ( ' ) is very often used in French.
Therefore if the text is generated in MS Word using old character mapping (universe) which we do, and using method of "cutting and paste" we are mismatching character set interpreted by other, newer applications.
Initially in the MS words (apostrophe) ' had code 191; then later after implementing Windows 1252 character set being moved to code 146 in accordance to ISO. Well ISO threat character coded 191 as ¿. So if you are using MS Word universe character set, ' looks like ' but in newer applications or ISO compatible applications it looks like ¿.
Can anyone provide me with periodically cleanup routines that replace garbled characters entered by Microsoft applications into Oracle database ?
Thanks
BrendonA simply update should work.
SQL> CREATE TABLE CHARTESTING(COLUMN1 VARCHAR2(30));
Table created.
Elapsed: 00:00:00.01
SQL>
SQL> INSERT INTO CHARTESTING (COLUMN1) VALUES (CHR(191)||CHR(146)||DBMS_RANDOM.STRING('A',5));
1 row created.
Elapsed: 00:00:00.01
SQL> COMMIT;
Commit complete.
Elapsed: 00:00:00.00
SQL> SELECT * FROM CHARTESTING;
COLUMN1
┐ÆTeoqw
Elapsed: 00:00:00.06
SQL> UPDATE CHARTESTING SET COLUMN1=REPLACE(COLUMN1,CHR(191),'*');
1 row updated.
Elapsed: 00:00:00.00
SQL> SELECT * FROM CHARTESTING;
COLUMN1
*ÆTeoqw
Elapsed: 00:00:00.00
SQL>After numerous attempts you will have to trust me that the characters are correct, my sqlplus isn't working for displaying the characters. -
Exporting of files in oracle 10g database
hey friends,
I installed Oracle 10g Database server on Windows XP,when i tried to take the backup through "Export to Files".I got this error.
I have added Administrator in "Login as Batch JOb" and has given administrator along with the password in host credentials.
I explain the procedure.I Login as Sys as SysOper as Oracle does not allow to take backup as sysdba.
I created the job and also given the right path for the backup but some how it fails then i check the log and i find the following output.
Output Log
Export: Release 10.1.0.2.0 - Production on Fri Mar 4 16:39:23 2005
Copyright (c) 1982, 2004, Oracle. All rights reserved.
Username:
EXP-00004: invalid username or password
Username: Password:
EXP-00004: invalid username or password
Username:
EXP-00030: Unexpected End-Of-File encountered while reading input
EXP-00000: Export terminated unsuccessfully
The output log says i am giving invalid username and password but i don't know where i am giving the invalid username and password.
Please guide me as I am new to Oracle and want to learn Oracle Administration.
Thanks & Regards
AnkushGive me output of following on standby server
SQL>select name from v$datafile;
SQL>show parameter log_archive_dest
Maybe you are looking for
-
For some reson I have duplicate songs on my iTunes / music can I delete thm on the iPad to save space ?
-
How to Trace ABAP Webdynpro Application?
Dear Friends, We are trying analyse performance bottle neck for ABAP Webdynro application. We have an Webdynpro Application named Z_APPLICTION_URL in NW 7.0 SP16 which is calling 4 RFC's in R/3 4.7 to fech data. Users lauch this application using URL
-
After importing photos shot on a Nikon D7000 none of the GPS data transfers into Lightroom.
GPS data doesn't transfer with the photo into Lightroom. Is there a proceedure to correct this?
-
Flash Builder Premium and Create Stuite CS5 not compatible
Hello, After installing Create Suite CS5 Master Collection, my exisiting Flash Builder Premium becomes Flash Builder Standard. I tried to reinstall Flash Builder, but it always picks up the serial number from CS5. How to restore Flash Builder Pre
-
How to connect to an internet hotspot
Hello, I have just installed my airport express and can play i tunes on my hi fi. So very happy. Only problem is in my condo we have a hot spot for internet connection. At the moment I can either use the imac to connect to the internet or connect to