Oracle 10g database in AIX 6.1.

Hello ALL!
Would anyone know what are the parameters or settings that need to be configured in AIX 6.1. before you can install Oracle 10g database?
Should you know any helpful and related links, please share.
Thanks so much!!!

You will need 10.2.0.3 or higher - see these MOS Docs for details
Oracle Database on Unix AIX,HP-UX,Linux,Mac OS X,Solaris,Tru64 Unix Operating Systems Installation and Configuration Requirements Quick Reference (8.0.5 to 11.2) [ID 169706.1]
Minimum Software Versions and Patches Required to Support Oracle Products on IBM Power Systems [ID 282036.1]
HTH
Srini

Similar Messages

Steps to export and import oracle 10g databse from AIX to AIX and LINUX

Hi,
I need the steps to export the oracle 10g database from AIX server to AIX server and LINUX server.
Please give me all the steps as this is my first exort an import activity.
thanks,

For 10g there exist two ways to do so.
1) Regular exp/imp.
2) Data pump expdp/impdp.
As this is your first export and import activity, relevant concept understanding is mandatory for you.
Documentation Link
http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14215/toc.htm
Read the chapters 1,2,3 (Data pump expdp/impdp) and 19 (regular exp/imp). Good luck.

Problem in installation of Oracle 10g database on RHEL 6

I am facing the problem when I am trying to install Oracle 10g database on Red Hat 6. When ./runinstaller is run, the message seems to be if I remember correctly is like ‘……………bad ELF interpreter’. But, the same source seems to be installing correctly in Red Hat 5.
Please, help in solving the doubt.
Regards

Hi;
1. Please make search before posting your issue here. Similar issue mention here million time
2. Please use certified platform such as *nix 5.x .
3. For can check certification from metalink or from below note:
Oracle Database on Unix AIX,HP-UX,Linux,Mac OS X,Solaris,Tru64 Unix Operating Systems Installation and Configuration Requirements Quick Reference (8.0.5 to 11.2) [ID 169706.1]
PS:Please dont forget to change thread status to answered if it possible when u belive your thread has been answered, it pretend to lose time of other forums user while they are searching open question which is not answered,thanks for understanding
Regard
Helios

Oracle 10g installation on AIX

Hi,
Could any one provide me any reference/help documents on how to install Oracle 10g software on AIX box?.
Regards,
Nagarjun.

This is the installation guide for AIX:
Oracle® Database Installation Guide
10g Release 2 (10.2) for AIX 5L Based Systems (64-Bit)
Part Number B19075-02
~ Madrid

Running test.rdf in oracle 10g and ibm aix 5L

Hi,
I am trying to run a demo test.rdf from the browser. This is in Oracle 10g and IBM AIX 5L.The report server is in-process server.
The url is
http://ipaddr:7778/reports/rwservlet?server=rep_igtewfux01&report=test.rdf&userid=dbuserid/dbpwd@asdb&desformat=PDF&destype=cache
Engine rwEng-0 crashes all the time. Below is a part of the exception . Please help.
[2005/8/26 6:19:14:20] Debug 50103 (JobManager:updateJobStatus): Finished updating job: 98
[2005/8/26 6:20:9:64] Exception 50125 (org.omg.CORBA.TRANSIENT: vmcid: 0x0 minor code: 0 completed: No
     at com.inprise.vbroker.orb.DelegateImpl.verifyConnection(DelegateImpl.java(Compiled Code))
     at com.inprise.vbroker.orb.DelegateImpl.is_local(DelegateImpl.java(Compiled Code))
     at org.omg.CORBA.portable.ObjectImpl._is_local(ObjectImpl.java(Compiled Code))
     at oracle.reports.engine._EngineClassStub.run(_EngineClassStub.java:147)
     at oracle.reports.server.JobManager.runJobInEngine(JobManager.java:784)
     at oracle.reports.server.JobManager.runJobLocal(JobManager.java:1557)
     at oracle.reports.server.JobManager.dispatch(JobManager.java:896)
     at oracle.reports.server.ConnectionImpl.runJob(ConnectionImpl.java:1166)
     at oracle.reports.client.ReportRunner.dispatchReport(ReportRunner.java:287)
     at oracle.reports.rwclient.RWReportRunner.dispatchReport(RWReportRunner.java:86)
     at oracle.reports.rwclient.RWClient.runReport(RWClient.java:1627)
     at oracle.reports.rwclient.RWClient.processRequest(RWClient.java:1481)
     at oracle.reports.rwclient.RWClient.doGet(RWClient.java:349)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java(Compiled Code))
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java(Compiled Code))
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java(Compiled Code))
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java(Compiled Code))
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:208)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:125)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
     at java.lang.Thread.run(Thread.java:568)
): Internal error org.omg.CORBA.TRANSIENT: vmcid: 0x0 minor code: 0 completed: No
[2005/8/26 6:20:9:64] Info 56029 (EngineManager:shutdownEngine): Shutting down engine rwEng-0
[2005/8/26 6:20:9:66] Exception 50125 (org.omg.CORBA.OBJECT_NOT_EXIST: vmcid: 0x0 minor code: 0 completed: No
     at com.inprise.vbroker.ProtocolEngine.PortfolioImpl.getConnector(PortfolioImpl.java(Compiled Code))
     at com.inprise.vbroker.ProtocolEngine.ManagerImpl.getConnector(ManagerImpl.java(Inlined Compiled Code))
     at com.inprise.vbroker.orb.DelegateImpl._bind(DelegateImpl.java(Compiled Code))
     at com.inprise.vbroker.orb.DelegateImpl.verifyConnection(DelegateImpl.java(Compiled Code))
     at com.inprise.vbroker.orb.DelegateImpl.is_local(DelegateImpl.java(Compiled Code))
     at org.omg.CORBA.portable.ObjectImpl._is_local(ObjectImpl.java(Compiled Code))
     at oracle.reports.engine._EngineClassStub.shutdown(_EngineClassStub.java:341)
     at oracle.reports.server.EngineManager.shutdownEngine(EngineManager.java:1216)
     at oracle.reports.server.JobManager.runJobInEngine(JobManager.java:826)
     at oracle.reports.server.JobManager.runJobLocal(JobManager.java:1557)
     at oracle.reports.server.JobManager.dispatch(JobManager.java:896)
     at oracle.reports.server.ConnectionImpl.runJob(ConnectionImpl.java:1166)
     at oracle.reports.client.ReportRunner.dispatchReport(ReportRunner.java:287)
     at oracle.reports.rwclient.RWReportRunner.dispatchReport(RWReportRunner.java:86)
     at oracle.reports.rwclient.RWClient.runReport(RWClient.java:1627)
     at oracle.reports.rwclient.RWClient.processRequest(RWClient.java:1481)
     at oracle.reports.rwclient.RWClient.doGet(RWClient.java:349)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java(Compiled Code))
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java(Compiled Code))
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java(Compiled Code))
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java(Compiled Code))
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:208)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:125)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
     at java.lang.Thread.run(Thread.java:568)
): Internal error org.omg.CORBA.OBJECT_NOT_EXIST: vmcid: 0x0 minor code: 0 completed: No
[2005/8/26 6:20:9:66] State 56004 (EngineInfo:setState): Engine rwEng-0 state is: Shutdown
[2005/8/26 6:20:9:66] Info 56047 (EngineManager:remove): Reports Server shut down engine rwEng-0
[2005/8/26 6:20:9:66] State 56016 (JobManager:updateJobStatus): Job 98 status is: Terminated with error:
REP-56048: Engine rwEng-0 crashed, job Id: 98
[2005/8/26 6:20:9:66] Debug 50103 (JobManager:notifyWaitingJobs): Master job 98 notify its duplicated jobs.
[2005/8/26 6:20:9:66] Debug 50103 (JobManager:updateJobStatus): Finished updating job: 98
[2005/8/26 6:20:9:67] Exception 56048 (): Engine rwEng-0 crashed, job Id: 98
exception oracle.reports.RWException {
oracle.reports.RWError[] errorChain={struct oracle.reports.RWError {
int errorCode=56048,
java.lang.String errorString="Engine rwEng-0 crashed, job Id: 98",
java.lang.String moduleName="REP"
     at oracle.reports.server.JobManager.runJobInEngine(JobManager.java:861)
     at oracle.reports.server.JobManager.runJobLocal(JobManager.java:1557)
     at oracle.reports.server.JobManager.dispatch(JobManager.java:896)
     at oracle.reports.server.ConnectionImpl.runJob(ConnectionImpl.java:1166)
     at oracle.reports.client.ReportRunner.dispatchReport(ReportRunner.java:287)
     at oracle.reports.rwclient.RWReportRunner.dispatchReport(RWReportRunner.java:86)
     at oracle.reports.rwclient.RWClient.runReport(RWClient.java:1627)
     at oracle.reports.rwclient.RWClient.processRequest(RWClient.java:1481)
     at oracle.reports.rwclient.RWClient.doGet(RWClient.java:349)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java(Compiled Code))
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java(Compiled Code))
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java(Compiled Code))
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java(Compiled Code))
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:208)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:125)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
     at java.lang.Thread.run(Thread.java:568)

mmmh. Did you compared the select count(*) from your_table; in the two cases.
If the result is not good and nobody has deleted rows between migration and your test, you migration need to be replayed.
Which migration did you select, Transportable database or exp/imp...?
Edited by: Dba Z on 16 août 2009 08:56

Moving Oracle 9i database from AIX 5.2 to AIX 5.3

Hi,
We are planing to move few of our Oracle 9i databases from AIX 5.2 to AIX 5.3 on another server. Will offline backup/restore work in this case ? The databases are fairly big (> 1 TB each). Looking for some advice.. Thanks.
Rgds,
Himansu

himansu_utkal wrote:
Hi Kamran,
As the DBs are fairly large ( approx. 1 TB each), how long it would take to copy the databases to the target server using RMAN DUPLICATE .. ? Do you think offline backup/restore would be a better approach ? Both the source and target boxes are co-located in the same data center. Thanks !
Rgds,
HimansuI assume that RMAN will be more faster than hard copy/paste (cold backup). I can't say how much it will probably take to take RMAN DUPLICATE, but it should be faster than cold backup
Kamran Agayev A. (10g OCP)
http://kamranagayev.wordpress.com
[Step by Step install Oracle on Linux and Automate the installation using Shell Script |http://kamranagayev.wordpress.com/2009/05/01/step-by-step-installing-oracle-database-10g-release-2-on-linux-centos-and-automate-the-installation-using-linux-shell-script/]

Returning 250 rows with 1000 Values in "IN" Clause Oracle 10g On IBM AIX !!

Hi,
Recently we have done the OS migration of Oracle 10g Server from Windows Server to IBM AIX. Everything is fine, But today we came across one crucial bug in the code, i.e In the Select Query, though we're expecting 1000 rows with 1000 values in "IN" Clause , It's returning Only 250 rows. Where as it's returning 1000 rows in Windows Environment with 1000 values in "IN" Clause. I have browsed throgh Google for the resolution but failed to get that.
This is something like,
In Oracle 10g On windows :-
select * from emp
where dept_id in (1,2,3,...................1000);
Assuming there are the dept_id values in Emp table from 1 ... 1000, It's returning 1000 rows.
In Oracle 10g On IBM AIX ,
select * from emp
where dept_id in (1,2,3,...................1000);
Assuming there are the dept_id values in Emp table from 1 ... 1000, It's returning 250 rows. Pls help me, what could be the reason for this. and what needs to be checked to fix this.
Pls suggest !!!
Raja

mmmh. Did you compared the select count(*) from your_table; in the two cases.
If the result is not good and nobody has deleted rows between migration and your test, you migration need to be replayed.
Which migration did you select, Transportable database or exp/imp...?
Edited by: Dba Z on 16 août 2009 08:56

Problem Oracle 10g database Installation on Windows 2003 Server

Hi All,
I am trying to face some problem to install oracle 10g database on windows 2003 server with service pack 2. Once I start to installation it give me an error "Error in writing to directory 'c:\documents and settings\administrator\local settings\temp\orainstall2004xxx'. Please ensure that this directory is writable and has at least 45MB of disk space. Installation cannot continue"
I double-insured that there is enough disk-space and I am also in the Administrators-Group.
Please guide me for the above problem although I have done oracle 9i database installation with the same configuration.
Regards
Muhammad Shoaib

898118 wrote:
Hi All,
I am trying to face some problem to install oracle 10g database on windows 2003 server with service pack 2. Once I start to installation it give me an error "Error in writing to directory 'c:\documents and settings\administrator\local settings\temp\orainstall2004xxx'. Please ensure that this directory is writable and has at least 45MB of disk space. Installation cannot continue"
I double-insured that there is enough disk-space and I am also in the Administrators-Group.
Please guide me for the above problem although I have done oracle 9i database installation with the same configuration.
Regards
Muhammad ShoaibOracle really doesn't like to be installed into directories with spaces in their names.

How to configure Oracle Dataguard for Oracle 10g database

Hi Friends,
I would like to configuer Oracle Dataguard for my Oracle 10g Database.
Please provide me the configuration document.(step by step guide)
Regards,
DB

Hi
Go throw below link. This would be help to configure ODG..,
http://blogs.oracle.com/AlejandroVargas/2007/09/data_guard_physical_standby_im.html
http://blogs.oracle.com/AlejandroVargas/2007/10/data_guard_broker_observer_and.html
Thanks,
Mayilselvan.S

Error executing a package on Oracle 10G database

Hi,
I've a package on Oracle 10G database which accepts xml string as input,loads it into XMLDOM and does some processing.
When I execute this package from .Net 2.0 client,I get the following error:
**Error**
err ORA-31011: XML parsing failed
ORA-19202: Error occurred in XML processing
LPX-00216: invalid character 0 (0x0)
Error at line 1
**Error**
But when I execute the same package from .Net client 2.0 on Oracle 9i database, it seems to work fine.The xml which I am sending is well-formed one.
Where am i going wrong?
Please help.
Thanks in advance...!
Regards,
Amit

Check the xml strings passed as input . One of the xmls may be malformed.

Installation of Oracle 10g Database on Windows Vista Home Basic

Hi All,
I'm confused about the possibility of installing Oracle 10g Database Server in Windows Home Basic Operating System with Service Pack 1. Please help me out with a confirmation.
Thanks in advance
Prasanth

Hi Prasanth
Yes that should be possible but is it a production database or just a test database.
you can always control that in metalink if it is supported, I don't believe it is.
Read that documentation to perform the installation.
http://download.oracle.com/docs/cd/B19306_01/install.102/b14316/toc.htm

Win32 Oracle 10g Database Server Installation problems

Hello,
I have recently installed the Oracle 10g Database Server for Win32. The installation seemed to be successful. I used the Enterprise option and all the suggested defaults. Ihave the following services installed and started after the installation:
o OracleDBConsoleORCL [started]
o OracleOraDb10g_home1iSQL*Plus [started]
o OracleOraDb10g_home1SNMPPeerEncapsulator [manual]
o OracleOraDb10g_home1SNMPPeerMasterAgent [manual]
o OracleOraDb10g_home1TNSListener [started]
o OracleServiceORCL [started]
I have created the following files:
# LISTENER.ORA Network Configuration File: d:\oracle10gServer\network\admin\listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = asparuh)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = d:\oracle10gServer)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = ORCL)
(ORACLE_HOME = d:\oracle10gServer)
(SID_NAME = ORCL)
# TNSNAMES.ORA Network Configuration File: d:\oracle10gServer\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = asparuh)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ORCL)
INST1_HTTP =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = asparuh)(PORT = 1521))
(CONNECT_DATA =
(SERVER = SHARED)
(SERVICE_NAME = MODOSE)
(PRESENTATION = http://HRService)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
I go to the DOS console and type:
c:> sqlplus scott/tiger@ORCL
and I get:
ERROR: ORA-28000: the account is locked
I did this right after I restarted my computer.
When I use the Enterprise Manager at:
http://localhost:5500/em/
I get for ORCL:
Status: Status Pending
Status Pending Since: Unavailable
Seems that I can never get the database started properly?! When I press the Startup/Shutdown button I get:
Current Status: open
This is the correct current database status, although it doesnot match the current status in the sitemap page
What does this mean? Do you think this may contain the clue to the answer to this problem?
When I restart the Database I get the same status: unavailable.
I need your help to resolve this problem. The alternative is to revert back to Oracle 9i DB Server. Thank you in advance.
gkk

I can help you with the SCOTT account being locked. Try:
sqlplus /nolog
connect / as sysdba
alter user scott identified by tiger account unlock;

Errors in manual creation of oracle 10g database

I created oracle 10g database manually and i am getting post installation errors.. could you please help out?
I executed @?/sqlplus/admin/pupbld.sql but it still shows
Error accessing PRODUCT_USER_PROFILE
Warning: Product user profile information not loaded!
You may need to run PUPBLD.SQL as SYSTEM
i tried to see
SQL> desc product_user_profile;
ERROR:
ORA-04043: object "SYSTEM"."SQLPLUS_PRODUCT_PROFILE" does not exist
not there?? any other scripts to be run ? please guide me.
2. I can not able login sys@sid as sysdba
SQL> select * from v$pwfile_users;
no rows selected
i changed
remote_login_passwordfile string EXCLUSIVE
re-started db but no help...
SQL> grant sysdba to sys;
grant sysdba to sys
ERROR at line 1:
ORA-01990: error opening password file
I re-created
$ORACLE_HOME/bin/orapwd file=$ORACLE_HOME/dbs/orapwmydb.ora password=xxxx entries=5 force=y
but no help..
Could one please help out... ! great thanks in advance..

thanks for prompt reply .. but still one issue remain..
oracle DEVS $ sqlplus sys@sid sysdba
SQL*Plus: Release 10.1.0.4.0 - Production on Thu Jan 7 10:51:44 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter password:
ERROR:
ORA-01031: insufficient privileges
but i can able to login as sqlplus sys as sysdba
SQL> select * From v$pwfile_users;
no rows selected
i tired to do
SQL> grant sysdba to sys;
grant sysdba to sys
ERROR at line 1:
ORA-01990: error opening password file
'/u02/app/oracle/product/10.1.0/dbs/orapw'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
there is already one password file with orapwsid.ora.. how this should be solved ? please help. thanks

We are getting ¿ stored into our Oracle 10g database (Microsoft fault)

We are getting ¿ stored into our Oracle 10g database that is using WE8ISO8859P1 character set.
Problem is caused by the following:
Microsoft released software (in particularly MS Word) before considering any ANSI or ISO standard (although they claimed so).
At that time of pioneering graphical interface - they were the standard. Since then things changed. Microsoft initially targeted US marked, however very soon they wanted to expanded to Europe. For that they needed to get standardized character set instead of one initially being in use. Microsoft re-mapped character set in newer applications using Windows-1252 character set which is compatible with ISO-8851-1 (we are using in our Java Web applications). That cleared obstacles to forward on European market, where extended characters are necessary (like in French, Dutch, German languages...)
What happened with the initial character codes before Microsoft agreed with ISO to standardize characters? Well - Nothing.
So what are the consequences of that?
If we are using Microsoft Word document in conjunction with one of the oldest character set (universe) the ice-age character mapping is still there. So when we "cut and paste" the content to another application, characters sets are not mapped anymore. Especially French language "is sensitive to this" The Microsoft character set in Word decimally coded 146 ( ' ) is very often used in French.
Therefore if the text is generated in MS Word using old character mapping (universe) which we do, and using method of "cutting and paste" we are mismatching character set interpreted by other, newer applications.
Initially in the MS words (apostrophe) ' had code 191; then later after implementing Windows 1252 character set being moved to code 146 in accordance to ISO. Well ISO threat character coded 191 as ¿. So if you are using MS Word universe character set, ' looks like ' but in newer applications or ISO compatible applications it looks like ¿.
Can anyone provide me with periodically cleanup routines that replace garbled characters entered by Microsoft applications into Oracle database ?
Thanks
Brendon

A simply update should work.
SQL> CREATE TABLE CHARTESTING(COLUMN1 VARCHAR2(30));
Table created.
Elapsed: 00:00:00.01
SQL>
SQL> INSERT INTO CHARTESTING (COLUMN1) VALUES (CHR(191)||CHR(146)||DBMS_RANDOM.STRING('A',5));
1 row created.
Elapsed: 00:00:00.01
SQL> COMMIT;
Commit complete.
Elapsed: 00:00:00.00
SQL> SELECT * FROM CHARTESTING;
COLUMN1
┐ÆTeoqw
Elapsed: 00:00:00.06
SQL> UPDATE CHARTESTING SET COLUMN1=REPLACE(COLUMN1,CHR(191),'*');
1 row updated.
Elapsed: 00:00:00.00
SQL> SELECT * FROM CHARTESTING;
COLUMN1
*ÆTeoqw
Elapsed: 00:00:00.00
SQL>After numerous attempts you will have to trust me that the characters are correct, my sqlplus isn't working for displaying the characters.

Exporting of files in oracle 10g database

hey friends,
I installed Oracle 10g Database server on Windows XP,when i tried to take the backup through "Export to Files".I got this error.
I have added Administrator in "Login as Batch JOb" and has given administrator along with the password in host credentials.
I explain the procedure.I Login as Sys as SysOper as Oracle does not allow to take backup as sysdba.
I created the job and also given the right path for the backup but some how it fails then i check the log and i find the following output.
Output Log
Export: Release 10.1.0.2.0 - Production on Fri Mar 4 16:39:23 2005
Copyright (c) 1982, 2004, Oracle. All rights reserved.
Username:
EXP-00004: invalid username or password
Username: Password:
EXP-00004: invalid username or password
Username:
EXP-00030: Unexpected End-Of-File encountered while reading input
EXP-00000: Export terminated unsuccessfully
The output log says i am giving invalid username and password but i don't know where i am giving the invalid username and password.
Please guide me as I am new to Oracle and want to learn Oracle Administration.
Thanks & Regards
Ankush

Give me output of following on standby server
SQL>select name from v$datafile;
SQL>show parameter log_archive_dest

Oracle 10g database in AIX 6.1.

Similar Messages

Maybe you are looking for