Oracle 10g database installation
Hi
I installed 10g database on my Win2K OS. I had accepted defaults and could even open up the EM from the browser. Later I installed Oracle 9iDS on the same machine but different home. Now when I invoke EM console, it says database is unavailable. Tried the 'Startup' from the console but in vain. I found that there was no tnsnames.ora file in the Oracle 9iDS home directory (c:/oracle/product/9iDS/network/admin). So copied the tnsnames.ora and listener.ora files from 10g HOME directory. But couldn't get to work.
Later I added a registry key TNS_ADMIN under the HOME0 for ALL_HOMES. I entered the key value to point to tnsnames.ora file in 10g HOME directory. No luck.
At the command prompt I can connect to SQLPLUS as dummy. At SQL prompt conn / as sysdba gives me the error:
ORA-12560: TNS:protocol adapter error
Could one of you resolve this issue?
Thanks
Now I tried to ping orcl
c:\tnsping orcl
Output I got was
Used Parameter files:
c:\oracle\product\9iDS\network\admin\sqlnet.ora
c:\oracle\product\9iDS\network\admin\tnsnames.ora
Attempting to contact ...... (SERVICE_NAME=orcl))))
OK (4120 msec)
This means that it actually looks at the tnsnames and sqlnet files in my 9iDS home directory. But my 10g database is in c:\oracle\product\10.1.0\db_1
I have installed Oracle 9iDS in a different HOME (c:\oracle\product\9iDS). Does this mean that these files should not be in mt 9iDS dir but only in 10g dir?
Could anybody explain what I need to do?
Similar Messages
-
Oracle 10g database installation in red hat 5
what are the packages needed for oracle 10g database installation in red hat 5?
what do you mean by yum way of installation?Check on the release notes for your platform
This is for x86-64 Linux.. read it all, then you'll find the "6 Documentation Corrections and Additions" section you'll find the RPMs that you need
http://download.oracle.com/docs/cd/B19306_01/relnotes.102/b15666/toc.htm
then go to the official doc installation of 10gR2 on x86-64 Linux
http://download.oracle.com/docs/cd/B19306_01/install.102/b15667/toc.htm
Yum is a package management tool. This is what you'll be using to install the RPMs. But first you'll have to setup the Yum repository, usually what I do is stage the DVD media on the server then make it as a repository. If ever there's a specific (higher) version that I need then I just pull it on the RedHat Network.
There are a lot of HOWTOs about Yum. You may read on this link http://docs.fedoraproject.org/yum/en/
- Karl Arao
http://karlarao.wordpress.com/ -
Where can I download the Oracle 10g Database Installer
where can I download the Oracle 10g Database Installer. I'm unable to find a link over the Oracle site. Please help me out on this one.
981705 wrote:
where can I download the Oracle 10g Database Installer. I'm unable to find a link over the Oracle site. Please help me out on this one.As mentioned above, you need to log a SR since 10g is not longer available for download -- https://forums.oracle.com/forums/search.jspa?threadID=&q=10g+AND+Download&objID=f36&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein -
Problem Oracle 10g database Installation on Windows 2003 Server
Hi All,
I am trying to face some problem to install oracle 10g database on windows 2003 server with service pack 2. Once I start to installation it give me an error "Error in writing to directory 'c:\documents and settings\administrator\local settings\temp\orainstall2004xxx'. Please ensure that this directory is writable and has at least 45MB of disk space. Installation cannot continue"
I double-insured that there is enough disk-space and I am also in the Administrators-Group.
Please guide me for the above problem although I have done oracle 9i database installation with the same configuration.
Regards
Muhammad Shoaib898118 wrote:
Hi All,
I am trying to face some problem to install oracle 10g database on windows 2003 server with service pack 2. Once I start to installation it give me an error "Error in writing to directory 'c:\documents and settings\administrator\local settings\temp\orainstall2004xxx'. Please ensure that this directory is writable and has at least 45MB of disk space. Installation cannot continue"
I double-insured that there is enough disk-space and I am also in the Administrators-Group.
Please guide me for the above problem although I have done oracle 9i database installation with the same configuration.
Regards
Muhammad ShoaibOracle really doesn't like to be installed into directories with spaces in their names. -
Oracle 10g Database Installation In Active-Passive Mode.
Good Afternoon !!!!
We are installing Oracle 10g in Active-Passive Mode on HP UX-11.3 , with ASM. Can someone help me with step wise installation procedure for the same.
Many Thank's
Rajeev.Check on the release notes for your platform
This is for x86-64 Linux.. read it all, then you'll find the "6 Documentation Corrections and Additions" section you'll find the RPMs that you need
http://download.oracle.com/docs/cd/B19306_01/relnotes.102/b15666/toc.htm
then go to the official doc installation of 10gR2 on x86-64 Linux
http://download.oracle.com/docs/cd/B19306_01/install.102/b15667/toc.htm
Yum is a package management tool. This is what you'll be using to install the RPMs. But first you'll have to setup the Yum repository, usually what I do is stage the DVD media on the server then make it as a repository. If ever there's a specific (higher) version that I need then I just pull it on the RedHat Network.
There are a lot of HOWTOs about Yum. You may read on this link http://docs.fedoraproject.org/yum/en/
- Karl Arao
http://karlarao.wordpress.com/ -
Oracle 10g Database installation error
I have come up with the message below when I click on setup.exe to launch OUI.
Using paramFile: C:\Oracle_Setup\stage\Components\oracle.swd.oui\2.3.0.10.0\1\DataFiles\Expanded\bin\win32\oraparam.ini
Checking requirements...
Checking operating system version: must be 4.0, 5.0, 5.1 or 5.2.
Actual 5.1 Passed
Checking monitor: must be configured to display at least 256 colors.
Actual 65536 Passed
Checking if CPU speed is above 300 MHz.
Actual 3006MHz Passed
All requirements met.
However, when the checking requirements process is done,
there's pop up window titled "Java Virtual Machine Launcher" saying "Could not find the main class. Program will exit".
I have tried to change the location of JRE in oraparam.ini file for searching the main class. But it does not work. Please help. Is this because my oraparam.ini does not indicate the location of the main class required for the JVM launcher?
Thank you very muchThanks for the help. However, I am not sure what you meant in your answer.
Let me show my oraparam.ini file below. Please let me know if there's anything to be changed in the file. Thanks a lot.
[Oracle]
DISTRIBUTION=FALSE
SOURCE=C:\Oracle_Setup\stage\products.jar
LICENSE_LOCATION=
JRE_LOCATION=C:\Oracle_Setup\stage\Components\oracle.swd.jre\1.4.2.0.0\1\DataFiles\Expanded
OUI_LOCATION=C:\Oracle_Setup\stage\Components\oracle.swd.oui\2.3.0.10.0\1\DataFiles\Expanded\ouica\win32
OUI_CORE_LOCATION=C:\Oracle_Setup\stage\Components\oracle.swd.oui\2.3.0.10.0\1\DataFiles\Expanded
DEFAULT_HOME_LOCATION=
DEFAULT_HOME_NAME=
"OUIHome"
NLS_ENABLED=TRUE
JRE_MEMORY_OPTIONS=" -mx96m"
NO_BROWSE=/net
BOOTSTRAP=FALSE
THIN_JDBC_FILENAME=classes12.jar
#THIN_JDBC_FILENAME is optional and defaults to classes12.jar
#The value specified for this should be packaged with OUI, and should
#be relative to <OUI expanded stagedir>/jlib/
THIN_JDBC_FILENAME=classes12.jar
#JRE_OSDPARAM is to set OS dependent param for JRE ( mainly for native VM in 1.3.1)
#JRE_OSDPARAM is optional and should be set to -native for the JRE's
#that support native VM ( mainly for Unix platforms ), in JRE 1.3.1
#For JRE 1.4.1 this should be set to empty or the type of VM that is
#supported client/server. The default value is -native in UNIX platforms
#that supports native VM
#Unix supporting native -
JRE_OSDPARAM=""
CLUSTERWARE={"oracle.crs","10.1.0.2.0"}
#Unix NOT supporting native and 1.4.1 - JRE_OSDPARAM=""
#Windows : DO NOT SET or JRE_OSDPARAM=""
OUI_VERSION=<2.3.0.10.0>
#RUN_OUICA specifies the batch script name that needs to be run
#The script is ouica.bat for win32, and ouica.sh for solaris.
#If the value is not specified, then the OUICA script is not run
RUN_OUICA=ouica.bat
#SHOW_HOSTNAME=ALWAYS_SHOW
#shows the hostname panel always
SHOW_HOSTNAME=NEVER_SHOW
#does not the hostname panel
#SHOW_HOSTNAME=CONDITION_SHOW
#shows the hostname panel on condition
#SHOW_HOSTNAME=NEVER_SHOW
[Certified Versions]
#You can customise error message shown for failure through CERTIFIED_VERSION_FAILURE_MESSAGE
Solaris=5.6,5.7,5.8,5.9
Windows=4.0,5.0,5.1,5.2
Linux=redhat-2.1AS
HPUX=B.11.11
Decunix=V5.1A,V5.1
AIX=5.1.0.0
[Solaris-5.6-required]
#Minimum temp space required by OUI, Increase it if your product installation so requires
#Temp space is required for bootstrap and during installation
#The TEMP_SPACE should be the first pre-req to be checked
TEMP_SPACE=150
#PACKAGES required by JRE and Product, /usr/bin/pkginfo gets list of packages on system
PACKAGES=
#Use PACKAGES_FAILURE_MESSAGE for custom error message for PACKAGES check failure
#CPU speed required, use /usr/sbin/psrinfo -v to get the speed
CPU=300
#Use CPU_FAILURE_MESSAGE to display custom error message for CPU check failure
#MIN_DISPLAY_COLORS required by OUI, use /usr/openwin/bin/xdpyinfo to get the colors
MIN_DISPLAY_COLORS=256 -
Problem in installation of Oracle 10g database on RHEL 6
I am facing the problem when I am trying to install Oracle 10g database on Red Hat 6. When ./runinstaller is run, the message seems to be if I remember correctly is like ‘……………bad ELF interpreter’. But, the same source seems to be installing correctly in Red Hat 5.
Please, help in solving the doubt.
RegardsHi;
1. Please make search before posting your issue here. Similar issue mention here million time
2. Please use certified platform such as *nix 5.x .
3. For can check certification from metalink or from below note:
Oracle Database on Unix AIX,HP-UX,Linux,Mac OS X,Solaris,Tru64 Unix Operating Systems Installation and Configuration Requirements Quick Reference (8.0.5 to 11.2) [ID 169706.1]
PS:Please dont forget to change thread status to answered if it possible when u belive your thread has been answered, it pretend to lose time of other forums user while they are searching open question which is not answered,thanks for understanding
Regard
Helios -
Installation of Oracle 10g Database on Windows Vista Home Basic
Hi All,
I'm confused about the possibility of installing Oracle 10g Database Server in Windows Home Basic Operating System with Service Pack 1. Please help me out with a confirmation.
Thanks in advance
PrasanthHi Prasanth
Yes that should be possible but is it a production database or just a test database.
you can always control that in metalink if it is supported, I don't believe it is.
Read that documentation to perform the installation.
http://download.oracle.com/docs/cd/B19306_01/install.102/b14316/toc.htm -
Win32 Oracle 10g Database Server Installation problems
Hello,
I have recently installed the Oracle 10g Database Server for Win32. The installation seemed to be successful. I used the Enterprise option and all the suggested defaults. Ihave the following services installed and started after the installation:
o OracleDBConsoleORCL [started]
o OracleOraDb10g_home1iSQL*Plus [started]
o OracleOraDb10g_home1SNMPPeerEncapsulator [manual]
o OracleOraDb10g_home1SNMPPeerMasterAgent [manual]
o OracleOraDb10g_home1TNSListener [started]
o OracleServiceORCL [started]
I have created the following files:
# LISTENER.ORA Network Configuration File: d:\oracle10gServer\network\admin\listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = asparuh)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = d:\oracle10gServer)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = ORCL)
(ORACLE_HOME = d:\oracle10gServer)
(SID_NAME = ORCL)
# TNSNAMES.ORA Network Configuration File: d:\oracle10gServer\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = asparuh)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ORCL)
INST1_HTTP =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = asparuh)(PORT = 1521))
(CONNECT_DATA =
(SERVER = SHARED)
(SERVICE_NAME = MODOSE)
(PRESENTATION = http://HRService)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
I go to the DOS console and type:
c:> sqlplus scott/tiger@ORCL
and I get:
ERROR: ORA-28000: the account is locked
I did this right after I restarted my computer.
When I use the Enterprise Manager at:
http://localhost:5500/em/
I get for ORCL:
Status: Status Pending
Status Pending Since: Unavailable
Seems that I can never get the database started properly?! When I press the Startup/Shutdown button I get:
Current Status: open
This is the correct current database status, although it doesnot match the current status in the sitemap page
What does this mean? Do you think this may contain the clue to the answer to this problem?
When I restart the Database I get the same status: unavailable.
I need your help to resolve this problem. The alternative is to revert back to Oracle 9i DB Server. Thank you in advance.
gkkI can help you with the SCOTT account being locked. Try:
sqlplus /nolog
connect / as sysdba
alter user scott identified by tiger account unlock; -
Oracle 10g Database control installation error
Hi,
Installing oracle 10g database control had give me an error.But Repository created successfully . please find the log file below
Is there i need to install ...? before i start to run emca to install Database Control.
my points of interest are here
FileNotFoundException: /opt/db/oracle/product/10.2.0/oc4j/j2ee/OC4J_DBConsole/config/http-web-site.xml (No such file or directory)
i didn't find jms.xml,rmi.xml,http-web-site.xml etc in this location /opt/db/oracle/product/10.2.0/oc4j/j2ee/OC4J_DBConsole/config/
File/directory /opt/db/oracle/product/10.2.0/sysman/emdrep/config/repository.variables does not exist
Let me know how to slove this error.
Thanks,
anil
Error
=========
emca -config dbcontrol db -repos create
STARTED EMCA at Apr 8, 2008 4:33:25 PM
EM Configuration Assistant, Version 10.2.0.1.0 Production
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Enter the following information:
Database SID: XXX
Listener port number: 1521
Password for SYS user:
Password for DBSNMP user:
Password for SYSMAN user:
Email address for notifications (optional):
Outgoing Mail (SMTP) server for notifications (optional):
You have specified the following settings
Database ORACLE_HOME ................ /opt/db/oracle/product/10.2.0
Database hostname ................ xxx.xxxx.local
Listener port number ................ 1521
Database SID ................ XXX
Email address for notifications ...............
Outgoing Mail (SMTP) server for notifications ...............
Do you wish to continue? [yes(Y)/no(N)]: yes
Apr 8, 2008 4:34:55 PM oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at /opt/db/oracle/product/10.2.0/cfgtoollogs/emca/SDM/emca_2008-04-08_04-33-25-PM.log.
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig createRepository
INFO: Creating the EM repository (this may take a while) ...
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig invoke
INFO: Repository successfully created
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig updateReposVars
SEVERE: File/directory /opt/db/oracle/product/10.2.0/sysman/emdrep/config/repository.variables does not existApr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig invoke
SEVERE: Failed to unlock all EM-related accounts
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Failed to unlock all EM-related accounts
Refer to the log file at /opt/db/oracle/product/10.2.0/cfgtoollogs/emca/SDM/emca_2008-04-08_04-33-25-PM.log for more details.
Could not complete the configuration. Refer to the log file at /opt/db/oracle/product/10.2.0/cfgtoollogs/emca/SDM/emca_2008-04-08_04-33-25-PM.log for more details.
the following is log generated (emca_2008-04-08_04-33-25-PM.log)
Apr 8, 2008 4:34:56 PM oracle.sysman.emcp.util.OUIInventoryUtil setOUILoc
CONFIG: Setting oracle.installer.oui_loc to /opt/db/oracle/product/10.2.0/oui
Apr 8, 2008 4:34:56 PM oracle.sysman.emcp.util.OUIInventoryUtil setOUILoc
CONFIG: Setting oracle.installer.oui_loc to /opt/db/oracle/product/10.2.0/oui
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Homes to scan for used ports: [opt/db/oracle/product/10.2.0]
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Searching all DBConsole instances for used ports under ORACLE_HOME /opt/db/oracle/product/10.2.0
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager findUsedPortsFromXML
CONFIG: Could not find or correctly parse file /opt/db/oracle/product/10.2.0/oc4j/j2ee/OC4J_DBConsole/config/jms.xml in searching for tag jms-server with att
ribute port
java.io.FileNotFoundException: /opt/db/oracle/product/10.2.0/oc4j/j2ee/OC4J_DBConsole/config/jms.xml (No such file or directory)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:106)
at java.io.FileInputStream.<init>(FileInputStream.java:66)
at java.io.FileReader.<init>(FileReader.java:41)
at oracle.sysman.emcp.util.PortManager.findUsedPortsFromXML(PortManager.java:282)
at oracle.sysman.emcp.util.PortManager.markAllUsedPorts(PortManager.java:1172)
at oracle.sysman.emcp.util.PortManager.getFreePorts(PortManager.java:543)
at oracle.sysman.emcp.EMDBPreConfig.getFreePorts(EMDBPreConfig.java:2324)
at oracle.sysman.emcp.EMDBPreConfig.checkPorts(EMDBPreConfig.java:2261)
at oracle.sysman.emcp.EMDBPreConfig.performConfiguration(EMDBPreConfig.java:670)
at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:233)
at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:160)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:141)
at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:479)
at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1123)
at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:463)
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:412)
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking JMS port: null from /opt/db/oracle/product/10.2.0/oc4j/j2ee/OC4J_DBConsole
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager findUsedPortsFromXML
CONFIG: Could not find or correctly parse file /opt/db/oracle/product/10.2.0/oc4j/j2ee/OC4J_DBConsole/config/rmi.xml in searching for tag rmi-server with att
ribute port
java.io.FileNotFoundException: /opt/db/oracle/product/10.2.0/oc4j/j2ee/OC4J_DBConsole/config/rmi.xml (No such file or directory)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:106)
at java.io.FileInputStream.<init>(FileInputStream.java:66)
at java.io.FileReader.<init>(FileReader.java:41)
at oracle.sysman.emcp.util.PortManager.findUsedPortsFromXML(PortManager.java:282)
at oracle.sysman.emcp.util.PortManager.markAllUsedPorts(PortManager.java:1176)
at oracle.sysman.emcp.util.PortManager.getFreePorts(PortManager.java:543)
at oracle.sysman.emcp.EMDBPreConfig.getFreePorts(EMDBPreConfig.java:2324)
at oracle.sysman.emcp.EMDBPreConfig.checkPorts(EMDBPreConfig.java:2261)
at oracle.sysman.emcp.EMDBPreConfig.performConfiguration(EMDBPreConfig.java:670)
at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:233)
at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:160)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:141)
at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:479)
at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1123)
at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:463)
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:412)
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking RMI port: null from /opt/db/oracle/product/10.2.0/oc4j/j2ee/OC4J_DBConsole
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager findUsedPortsFromXML
CONFIG: Could not find or correctly parse file /opt/db/oracle/product/10.2.0/oc4j/j2ee/OC4J_DBConsole/config/http-web-site.xml in searching for tag web-site
with attribute port
java.io.FileNotFoundException: /opt/db/oracle/product/10.2.0/oc4j/j2ee/OC4J_DBConsole/config/http-web-site.xml (No such file or directory)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:106)
at java.io.FileInputStream.<init>(FileInputStream.java:66)
at java.io.FileReader.<init>(FileReader.java:41)
at oracle.sysman.emcp.util.PortManager.findUsedPortsFromXML(PortManager.java:282)
at oracle.sysman.emcp.util.PortManager.markAllUsedPorts(PortManager.java:1180)
at oracle.sysman.emcp.util.PortManager.getFreePorts(PortManager.java:543)
at oracle.sysman.emcp.EMDBPreConfig.getFreePorts(EMDBPreConfig.java:2324)
at oracle.sysman.emcp.EMDBPreConfig.checkPorts(EMDBPreConfig.java:2261)
at oracle.sysman.emcp.EMDBPreConfig.performConfiguration(EMDBPreConfig.java:670)
at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:233)
at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:160)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:141)
at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:479)
at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1123)
at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:463)
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:412)
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking HTTP port: null from /opt/db/oracle/product/10.2.0/oc4j/j2ee/OC4J_DBConsole
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.FileUtil getProperties
CONFIG: Error reading file /opt/db/oracle/product/10.2.0/sysman/config/emd.properties
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager getAgentPort
CONFIG: Cannot parse EMD_URL correctly. No port identified
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking Agent port: null from /opt/db/oracle/product/10.2.0/sysman/config/emd.properties
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Cannnot parse EMD_URL correctly. No port identified
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.FileUtil getProperties
CONFIG: Error reading file /opt/db/oracle/product/10.2.0/install/staticports.ini
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.PortManager getFreePorts
CONFIG: /opt/db/oracle/product/10.2.0:mcidm11.pacs11.local:null:SDM:{}:null:{DBCONTROL_HTTP_PORT=1158, RMI_PORT=5520, JMS_PORT=5540, AGENT_PORT=3938}
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT_SDM.
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: AGENT_PORT_SDM value: 3938
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT_SDM.
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DBCONTROL_HTTP_PORT_SDM value: 1158
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT_SDM.
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: JMS_PORT_SDM value: 5540
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT_SDM.
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: RMI_PORT_SDM value: 5520
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMDBPreConfig getFreePorts
CONFIG: Ports assigned for SID: SDM : {DBCONTROL_HTTP_PORT=1158, RMI_PORT=5520, JMS_PORT=5540, AGENT_PORT=3938}
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: SDM, oracleHome: /opt/db/oracle/product/10.2.0, and user: SYS
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig createRepository
CONFIG: Spooling to /opt/db/oracle/product/10.2.0/cfgtoollogs/emca/SDM/emca_repos_create_2008-04-08_04-34-58-PM.log
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig createRepository
INFO: Creating the EM repository (this may take a while) ...
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig invoke
INFO: Repository successfully created
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: SDM, oracleHome: /opt/db/oracle/product/10.2.0, and user: SYS
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig grantPrivsToDbsnmp
CONFIG: Exception while granting priviliges.
oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-00942: table or view does not exist
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1467)
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeSql(SQLEngine.java:1708)
at oracle.sysman.emcp.EMReposConfig.grantPrivsToDbsnmp(EMReposConfig.java:503)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:208)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:124)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:142)
at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:479)
at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1123)
at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:463)
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:412)
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig invoke
CONFIG: Failed to grant priviliges to dbsnmp.
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig updateReposVars
SEVERE: File/directory /opt/db/oracle/product/10.2.0/sysman/emdrep/config/repository.variables does not existApr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: SDM, oracleHome: /opt/db/oracle/product/10.2.0, and user: SYS
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig unlockAccounts
CONFIG: Unlocking dbsnmp and sysman
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig unlockAccounts
CONFIG: ORA-06550: line 1, column 62:
PLS-00201: identifier 'SYSMAN.MGMT_VIEW_PRIV' must be declared
ORA-06550: line 1, column 62:
PL/SQL: Statement ignored
oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-06550: line 1, column 62:
PLS-00201: identifier 'SYSMAN.MGMT_VIEW_PRIV' must be declared
ORA-06550: line 1, column 62:
PL/SQL: Statement ignored
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1467)
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeSql(SQLEngine.java:1708)
at oracle.sysman.emcp.EMReposConfig.unlockAccounts(EMReposConfig.java:566)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:235)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:124)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:142)
at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:479)
at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1123)
at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:463)
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:412)
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMReposConfig invoke
SEVERE: Failed to unlock all EM-related accounts
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Failed to unlock all EM-related accounts
Refer to the log file at /opt/db/oracle/product/10.2.0/cfgtoollogs/emca/SDM/emca_2008-04-08_04-33-25-PM.log for more details.
Apr 8, 2008 4:34:58 PM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Failed to unlock all EM-related accounts
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:239)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:124)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:142)
at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:479)
at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1123)
at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:463)
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:412)Hi all,
i started creating database control repository, when i saw emca running i had seen repository created successfully , but sysman user is not created at this point of time. Then i looked into emca_repos_create_2008-04-10_11-57-03-AM.log file but the file is unable to open because it's looking for file emreposcre.sql which creates sysman user in this location /opt/db/oracle/product/10.2.0/sysman/admin/emdrep/sql/
i feel while installing the database these files are not created....? or i need to run any scripts before running emca ....?
give me some inputs to this thread.
Thanks,
nil
STARTED EMCA at Apr 10, 2008 11:55:41 AM
EM Configuration Assistant, Version 10.2.0.1.0 Production
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Enter the following information:
Database SID: XXXXX
Listener port number: 1521
Password for SYS user:
Password for SYSMAN user:
Do you wish to continue? [yes(Y)/no(N)]: yes
Apr 10, 2008 11:57:02 AM oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at /opt/db/oracle/product/10.2.0/cfgtoollog
Apr 10, 2008 11:57:03 AM oracle.sysman.emcp.EMReposConfig createRepository
INFO: Creating the EM repository (this may take a while) ...
Apr 10, 2008 11:57:03 AM oracle.sysman.emcp.EMReposConfig invoke
INFO: Repository successfully created
Enterprise Manager configuration completed successfully
FINISHED EMCA at Apr 10, 2008 11:57:03 AM
mcidm11 10.2.0/bin>
CONFIG: Spooling to /opt/db/oracle/product/10.2.0/cfgtoollogs/emca/SDM/emca_repos_create_2008-04-10_11-57-03-AM.log
Apr 10, 2008 11:57:03 AM oracle.sysman.emcp.EMReposConfig createRepository
INFO: Creating the EM repository (this may take a while) ...
Apr 10, 2008 11:57:03 AM oracle.sysman.emcp.EMReposConfig invoke
INFO: Repository successfully created
mcidm11 emca/SDM> pwd
/opt/db/oracle/product/10.2.0/cfgtoollogs/emca/SDM
mcidm11 emca/SDM> more emca_repos_create_2008-04-10_11-57-03-AM.log
SP2-0310: unable to open file "/opt/db/oracle/product/10.2.0/sysman/admin/emdrep/sql/emreposcre.sql"mcidm11 emca/SDM> cd
Directory: /opt/db
mcidm11 /opt/db> cd /opt/db/oracle/product/10.2.0/sysman/admin/emdrep/sql/
Directory: /opt/db/oracle/product/10.2.0/sysman/admin/emdrep/sql
mcidm11 emdrep/sql> ls
core db ias ocs -
Installation of oracle 10g database
Hi all,
i want ot install both client and server of oracle 10g database with default schema's like sh, hr oe etc..
can anybody send me docs regarding this..!!!!!!
thanksHi;
i want ot install both client and server of oracle 10g database with default schema's like sh, hr oe etc..You can find all installation guide on below link:
http://www.oracle.com/pls/db102/homepage
If you want to have sample schema than during instalation wizard screen click create schema area on screen
Regard
Helios -
Oracle 10g R2 installation with ASM+RAC
Gurus,
Need some suggestuon on Oracle 10g R2 installation with ASM and RAC option.
We have found many documents on the Oracle, HP, HP-Oracle CTC and third party web sites, but nothing that is specific to this particular combination of separate
ORACLE_HOMEs, ASM and 10g RAC CRS. It is unclear for me from the documentation how this combination of ASM and 10.2g RAC may best be installed.
The high level steps i got after reading lot of docs as follows - but i am not sure whether these are correct or not. if they are correct, can any one share their experience/notes please?
1) Install CRS
2) Install RDBMS for ASM HOME - create separater oracle home for ASM instance using OUI
3) Install RDBMS for RAC Database Home - create separater oracle home for RAC database using OUI
4) Create ASM database using DBCA -
5) Use dbca to create database.Oracle provides 'paint by numbers' tutorials called 'Oracle By Example'. (Go to OTN, check under the Training tab)
They have one for a Windows based ASM/RAC that you might want to review. Not your specific environment, but the steps will be dag-nabbed close.
I recommend walking the path (http://otn.oracle.com >> training:OBE >> Database 10g Release 1:VMWare:Installation
http://www.oracle.com/technology/obe/obe10gdb_vmware/install/racinstallwin2k/racinstallwin2k.htm -
10g database installation in windows2003
Following error found in the insallation of 10g database installation in Windows 2003.
Kindly give me the solutions in [email protected]
Thaning you
Mohan, Milma, Tvm.Kerala India.
Error list from Oracle configuration assistant
Output generated from configuration assistant "Oracle Net Configuration Assistant":
Parsing command line arguments:
Parameter "orahome" = E:\oracle\ora10g
Parameter "orahnam" = OraDb10g_home1
Parameter "instype" = typical
Parameter "inscomp" = client,oraclenet,javavm,server,ano
Parameter "insprtcl" = tcp,nmp
Parameter "cfg" = local
Parameter "authadp" = NO_VALUE
Parameter "nodeinfo" = NO_VALUE
Parameter "responsefile" = E:\oracle\ora10g\network\install\netca_typ.rsp
Done parsing command line arguments.
Oracle Net Services Configuration:
Profile configuration complete.
Oracle Net Listener Startup:
Running Listener Control:
E:\oracle\ora10g\bin\lsnrctl start LISTENER
Listener Control complete.
Listener started successfully.
Setting Listener service to start automatically.
Listener configuration complete.
Default local naming configuration complete.
Oracle Net Services configuration successful. The exit code is 0
Configuration assistant "Oracle Net Configuration Assistant" succeeded
================================================================================================================
Output generated from configuration assistant "iSQL*Plus Configuration Assistant":
iSQL*Plus 10.1.0.2.0
Copyright (c) 2004 Oracle. All rights reserved.
Starting iSQL*Plus ...
iSQL*Plus started.
Configuration assistant "iSQL*Plus Configuration Assistant" succeeded
================================================================================================================
Output generated from configuration assistant "Oracle Database Configuration Assistant":
java.io.IOException:
Instance created.
DIM-00019: create service error
O/S-Error: (OS 1388) A new member could not be added to a local group because the member has the wrong account type.
at oracle.sysman.assistants.util.OsUtilsBase.execProg(OsUtilsBase.java:1090)
at oracle.sysman.assistants.util.OsUtilsBase.execProg(OsUtilsBase.java:1026)
at oracle.sysman.assistants.util.OsUtilsBase.execProg(OsUtilsBase.java:1007)
at oracle.sysman.assistants.util.Oradim.addEntry(Oradim.java:530)
at oracle.sysman.assistants.dbca.backend.InstanceStep.executeImpl(InstanceStep.java:243)
at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:209)
at oracle.sysman.assistants.util.step.BasicStep.callStep(BasicStep.java:250)
at oracle.sysman.assistants.dbca.backend.CloneRmanRestoreStep.executeImpl(CloneRmanRestoreStep.java:201)
at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:209)
at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
at oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2394)
at java.lang.Thread.run(Thread.java:534)
Configuration assistant "Oracle Database Configuration Assistant" failedI had the same problem and solved it by doing the following:
Do not stop the DBCA to do this.
Go to Start->Control Panel-> Services -> oracleserviceyoursid and start the service. That will get you through that error.
Just in case you see this one as well....I did encounter a TNS error after that. I resolved this by commenting out (#) the line SQLNET.AUTHENTICATION_SERVICES=(NTS) in SQLNET.ORA file. -
Errors in manual creation of oracle 10g database
I created oracle 10g database manually and i am getting post installation errors.. could you please help out?
I executed @?/sqlplus/admin/pupbld.sql but it still shows
Error accessing PRODUCT_USER_PROFILE
Warning: Product user profile information not loaded!
You may need to run PUPBLD.SQL as SYSTEM
i tried to see
SQL> desc product_user_profile;
ERROR:
ORA-04043: object "SYSTEM"."SQLPLUS_PRODUCT_PROFILE" does not exist
not there?? any other scripts to be run ? please guide me.
2. I can not able login sys@sid as sysdba
SQL> select * from v$pwfile_users;
no rows selected
i changed
remote_login_passwordfile string EXCLUSIVE
re-started db but no help...
SQL> grant sysdba to sys;
grant sysdba to sys
ERROR at line 1:
ORA-01990: error opening password file
I re-created
$ORACLE_HOME/bin/orapwd file=$ORACLE_HOME/dbs/orapwmydb.ora password=xxxx entries=5 force=y
but no help..
Could one please help out... ! great thanks in advance..thanks for prompt reply .. but still one issue remain..
oracle DEVS $ sqlplus sys@sid sysdba
SQL*Plus: Release 10.1.0.4.0 - Production on Thu Jan 7 10:51:44 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter password:
ERROR:
ORA-01031: insufficient privileges
but i can able to login as sqlplus sys as sysdba
SQL> select * From v$pwfile_users;
no rows selected
i tired to do
SQL> grant sysdba to sys;
grant sysdba to sys
ERROR at line 1:
ORA-01990: error opening password file
'/u02/app/oracle/product/10.1.0/dbs/orapw'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
there is already one password file with orapwsid.ora.. how this should be solved ? please help. thanks -
Oracle 10g Database conflicts with HTMLDB
Hai all,
I have encountered a strange conflict when I am trying to work out with Oracle 10g database and the famous HTML DB.
It is like this:
I have a 10g DB installed and an ASP application that works on this 10g instance via "Microsoft ODBC driver for oracle" perfectly.
Now I have downloaded and installed the 10g Companion CD and installed the HTML DB 1.5 along with the mandatory Apache web server. Good!! I could scrawl through the database using the HTML DB, creating applications, forms, items and etc fancy things without any issues.
The problem that I found was:
The ASP based application that used to work initially now is erroring out saying that "TNS could not resolve service name".
I thought that the Listener might be damaged or the ASP site was damaged or the Microsoft ODBC driver files were damaged and several other vauge guessings.
I have tested the issue in several ways (reinstalled oracle, the DB, the ASP Applicaton, re-configurin listener in a variety of ways) but every time installing BLINDLY the companion CD too. Nothing seem to work.
Then I recollected that the same issue I have encountered in the past with the installation of Oracle 8i and Developer 2000, where the TNS listener configured by the former damages the one configured by the later and vice-versa.
Basing on this past reminiscence, I finally stopped installing Companion CD over the Oracle installation and carried out the DB installation and the ASP based app. And everything worked fine.
CAN anybody tell me what is going wrong with these two oracle products(Oralce 10g DB and the HTML DB+Apache)?
WHY always the installation of a CLIENT SW (Developer, HTML DB etc) damages the connection with the database via ODBC drivers?
Many Thanks in advance.
RaviDera Mr. Tyler,
Thanks for your reply...I have implemented the solution that you have given for the TNS Listener conflict and everything works fine...
Here I have one more thing thats not working as I thought. do kindly help me out.
My requirement is to show the list of available storage drives (say C:, d:, e: etc on windows) available on the database server. Let me eloborate my problem well....
i have a Java App that executes a specific SQL script to create a tablespace, a user and the required db objects that my applicaiton needs.
if the Java App runs on the same machine where the oracle instance is running, the Java app pops up a list of available drives on the machine, creates a directory for the tablespace datafiles on the drive selected from the above list box, then runs the script which creates the tablespace and the rest of the things.
But if i run the Java app from another machine on the network, then my BLIND java app is popping up the drives of the local machine but NOT those from the oracle server machine and creates the folder on the local machine but not on the Oracle server and obviously the rest of the phases (tablespace creation itself) are failing as the required folder is not found on the oracle server machine.
the work arounds that i am thinking are:
a) use java ->
get the IP of the oracle server machine ->
use some java api such as java.net, java.io etc ->
create the required folder on the server machine instead of the local machihe
ISSUE: Java network programming is too tough for me(excuse me for this..i am not too good!!)
b) use some oracle sql or pl/sql api s to do the same
ISSUE: not found one!!!!
c) create a java stored procedure/function to get the list of drives of the oracle server and return as a string variable. then call this proc from the Java app once connected to the database....
ISSUE: i have created the SO-CALLEd java func. no compilation or loading errors. but there is no o/p either. but the same code when i run as a java class is showing the desired o/p. here is the code piece...can you please help me out!!!
-------Java Stored Function------
import java.io.*;
public class HDDLister
public static String listDrives()
String rootsList = "Available Roots: ";
try
File[]roots = File.listRoots();
for (int i=0;i<roots.length;i++)
rootsList += roots.toString();
rootsList += "#";
catch(Exception ex)
rootsList = ex.toString();
return rootsList;
-------Command to publish the Funciton-------
CREATE OR REPLACE FUNCTION HDDLISTER
RETURN VARCHAR2
IS
LANGUAGE JAVA
NAME 'HDDLister.listDrives() return java.lang.String';
and finally the point of the problem is, once we show the drives available on the server machine to the user and the user selects a drive, how to create a folder on the server machine???
Thousands of thanks in advance
Ravi
Maybe you are looking for
-
I´m quite new into Iphone and I want to know which downloads and applications are available for my Iphone for exp. Google earth. Where do I get them and how do I install them into my device?
-
Itunes is not recognising my ipod when plugged in to my computer
I have recently updated itunes and my ipod is no longer recognised by my computer when i plug it in.
-
Hi, I have read the article about shortcuts, I didn't know all of that was possible. But I did not find the only thing I was looking for. I generally have lot of tabs open. So often I need to open a new tab next to the one I am working in (the one wi
-
Intel Core Duo - backup hangs up when trying to start a new back up plan, help!
Help please! I have an intel core duo, running current snow leopard 10.6.8. When I open back up and try to create a new plan, the screen just hangs and does not let me create a new plan. I am running current version of back up 3.2, and I am frustrat
-
Composers, Genres but no longer Audiobooks. That clasification is absent from my iTunes as well. I have downloaded an audiobook to my IPhone and it shows in iTunes when I click on "On This iPhone" in ITunes but I can't find it on the iPhone itself. W