Oracle 10g Example Database

How can I install the Example Database via Script?
My System:
Oracle 10g on SuSE Linux 8.2
Thanks!

Perhaps you will more chance to find a response with posting your question into Oracle By Example (OBE).<br>
<br>
Nicolas.

Similar Messages

Oracle 10g/11g database use on UEK versus Red Hat kernel? How widely used?

Greetings
is there any official or semi-official information regarding how widely used is Oracle UEK to run Oracle 10g/11g database (RAC or single-node) versus running Oracle database on Red Hat Linux or on Oracle Linux with Red Hat kernel ?
I am asking because at my customer site there is a perception that Red Hat (or Oracle Linux with Red Hat kernel) is much more widely used in production to run Oracle 10g/11g database and therefore it will provide better stability even if the performance may be somewhat reduced compared to Oracle UEK option.
So I need some sort of approximate percentage numbers of how well is UEK used in Linux Oracle community to run Oracle 10g/11g databases.
Many thanks.
Yuri B

The problem with the world is that the intelligent people are full of doubts, while the stupid ones are full of confidence. Well, in my opinion, a higher market share does not reflect the quality or reliability of a product. Take MS Windows for example. Unfortunately, the reason for success is often not due to knowledge and experience, but rather due to fear and sheep effect or herd behavior.
Perhaps you can use other arguments or questions to help you to make a decision, eg.:
Oracle has a better understanding of what Oracle products require than Red Hat.
Oracle takes full responsibility for the OS and Database, no finger pointing.
Oracle tries to provide a better product than the RHEL kernel.
The Oracle UEK kernel contains Oracle driver software, not available for RHEL 6 or later.
Oracle updates are free of charge, RHEL requires a subscription.
Oracle as a company is about 20 times bigger than Red Hat.
There can be reasons that require the use of the original RHEL kernel, for instance if the vendor of a specific driver for your hardware demands it. But otherwise...

Number of available records in Oracle 10g express database

Hi,
I am facing problems in getting the number of available records in Oracle 10g express database with the following query.
string filename = dbObject.FILENAME;
string vendorID = dbObject.VENDOR_ID;
OracleCommand myCommand = _connection.CreateCommand();
myCommand.CommandText = "SELECT COUNT(*) FROM ASSET_PROCESSING_OUTPUT WHERE *FILENAME = :filename AND VENDOR_ID = :vendorID*";
myCommand.CommandType = CommandType.Text;
myCommand.Parameters.AddWithValue("filename", filename);
myCommand.Parameters.AddWithValue("vendorID", vendorID);
OracleDataReader reader = myCommand.ExecuteReader();
Using this command how can I get if the record exists in the database with the given value.
Thanks in advance.
punit

It appears you're only executing the statement. You need to fetch the result to see the value returned by the SELECT statement.

Install APEX to work on existing Oracle 10g R1 database

I want to use APEX on an existing Oracle 10g R1 database. If I install it normally with the program downloaded from your site, it installs its own database that you use.
How can I set / install it to use the existing database instead of its own database?
Elsie Pretorius

Hi guys,
Thanks for the info and input. Is there anybody have sucessfully done this. Most of the info that out there, the README in the patchset all pointing to upgrading the OCS, not installing the OCS on top of an existing 10g AS and DB. I'm thinking installing the OCS R2, and then patching and upgrade it to 9.0.4.2 or 4.3 and then point or move it to the existing 10AS and DB. This is where I'm quit blur at the moment.
Anyway thank for all the info.
Regards
Din

Can we access Oracle 10g R2 database from Oracle 11g Client

Hi,
Can any1 tell me can we access Oracle 10g R2 database from Oracle 11g Client ? I m unable to find a Oracle Client 10g R2 for Windows 7 32 bit.
Below link is for Vista only
http://www.oracle.com/technetwork/database/10203vista-087538.html

832812 wrote:
Hi,
Can any1 tell me can we access Oracle 10g R2 database from Oracle 11g Client ? I m unable to find a Oracle Client 10g R2 for Windows 7 32 bit.
Below link is for Vista only
http://www.oracle.com/technetwork/database/10203vista-087538.html
Check this note for client/server compatibility
Client / Server / Interoperability Support Between Different Oracle Versions [ID 207303.1]

Connect Oracle Developer / Designer to Oracle 10g XE database

I have installed the Oracle 10g XE database on my PC. Also on the same computer I have installed Oracle 10g Developer Suite (Designer, Forms etc). The database runs ok without problem. However I cannot connect Designer to the database. I know a listner program (e.g. tsn listner) has to be installed for the purpose of connecting to the database. When starting the XE database a listner program also is started.
My question:
What do I have to do inorder to have the Designer connect to the XE database?
R. Carson

Is there any changes should I do?!Well sorry but I don't know. This sugesstion to copy sqlnet.ora file resolve my problems to connect with Developer 6i to 10g, but that is 10g EE in my office, not XE at home...
Anyway your sqlnet.ora file look like very "default" but maybe is that O.K. on XE?
Who knows?
Message was edited by:
Faust
Edit: Try to search this Forum, I think, I saw few threads discussing theme "connect Developer 6i to XE" ... Good Luck!

Oracle 10g Lite Database User Creation

Hi,
I am using Oracle 10g Lite Database Release 3, I Like to Know How to Create a user in Oracle 10g Lite Database through Command ,Any Advice
Thanks U
SHAN

Shan,
In the same way you create user in any other oracle database. I recommned to check following Oracle Lite Sql reference document for creating user from command line.
http://download.oracle.com/docs/cd/B19188_01/doc/B15917/sqcmd.htm#sthref487
or
sql> CREATE USER liteuser IDENTIFIED BY "litepassword"; -- And add required privs to the user.
Regards

Oracle 10g Lite database - Replacement

Hi,
Can u mention some database similar to oracle 10g Lite database features which supports forms10gr2?]
Note: Thin Database required.
Regards
Sreenivas

Shan,
In the same way you create user in any other oracle database. I recommned to check following Oracle Lite Sql reference document for creating user from command line.
http://download.oracle.com/docs/cd/B19188_01/doc/B15917/sqcmd.htm#sthref487
or
sql> CREATE USER liteuser IDENTIFIED BY "litepassword"; -- And add required privs to the user.
Regards

Does the Linux suse10.2 supports Oracle 10g XP database?

Hi,
I like to install Oracle 10g XE Database on my Linux suse10.2 operating system. I am not sure that the Linux suse10.2 OS supports the installation of Oracle 10g XE database. If it supports kindly let me know which version of 10g XE supports.
Thanks in advance,
Senthil.

These Linux distributions are currently supported:
Red Hat Enterprise Linux RHEL3 and RHEL4
Suse SLES-9
Fedora Core 4
Red Flag DC Server 5.0/MIRACLE LINUX V4.0/Haansoft Linux 2006 Server (Asianux 2.0 Inside)
Debian 3.1
Werner

Not able to access Oracle 10g XE database home page on Windows XP?

I wanted to practise pl/sql in my office pc. I installed Oracle 10g XE on my machine and after that I also started Agent from Services. However When i clicked on Database home page it doesn't start. Changing network configuration might create problem in network. Can anybody help me working out this problem or has any alternative to practise PL/SQL with tiny oracle database.
Regards
Manish
Edited by: user11003855 on Apr 19, 2009 11:27 PM

Did you configure loopback adapter?
:p

Oracle 10g RAC Database Migration from SAN to New SAN.

Hi All,
Our client has implemented a Two Node Oracle 10g R2 RAC on HP-UX v2. The Database is on ASM and on HP EVA 4000 SAN. The database size in around 1.2 TB.
Now the requirement is to migrate the Database and Clusterware files to a New SAN (EVA 6400).
SAN to SAN migration can't be done as the customer didn't get license for such storage migration.
My immediate suggestion was to connect the New SAN and present the LUNs and add the Disks from New SAN and wait for rebalance to complete. Then drop the Old Disks which are on Old SAN. Exact Steps To Migrate ASM Diskgroups To Another SAN Without Downtime. (Doc ID 837308.1).
Clients wants us to suggest alternate solutions as they are worried that presenting LUNs from Old SAN and New SAN at the same time may give some issues and also if re-balance fails then it may affect the database. Also they are not able to estimate the time to re-balance a 1.2 TB database across Disks from 2 different SAN. Downtime window is ony 48 hours.
One wild suggestion was to:
1. Connect the New SAN.
2. Create New Diskgroups on New SAN from Oracle RAC env.
3. Backup the Production database and restore on the same Oracle RAC servers but on New Diskgroups.
4. Start the database from new Diskgroup location by updating the spfile/pfile
5. Make sure everything is fine then drop the current Diskgroups from Old SAN.
Will the above idea work in Production env? I think there is a lot of risks in doing the above.
Customer does not have Oracle RAC on Test env so there isn't any chance of trying out any method.
Any suggestion is appreciated.
Rgds,
Thiru.

user1983888 wrote:
Hi All,
Our client has implemented a Two Node Oracle 10g R2 RAC on HP-UX v2. The Database is on ASM and on HP EVA 4000 SAN. The database size in around 1.2 TB.
Now the requirement is to migrate the Database and Clusterware files to a New SAN (EVA 6400).
SAN to SAN migration can't be done as the customer didn't get license for such storage migration.
My immediate suggestion was to connect the New SAN and present the LUNs and add the Disks from New SAN and wait for rebalance to complete. Then drop the Old Disks which are on Old SAN. Exact Steps To Migrate ASM Diskgroups To Another SAN Without Downtime. (Doc ID 837308.1).
Clients wants us to suggest alternate solutions as they are worried that presenting LUNs from Old SAN and New SAN at the same time may give some issues and also if re-balance fails then it may affect the database. Also they are not able to estimate the time to re-balance a 1.2 TB database across Disks from 2 different SAN. Downtime window is ony 48 hours.Adding and removing LUNs online is one of the great features of ASM. The Rebalance will be perfomed under SAN. No downtime!!!
If your customer is not entrusting on ASM. So Oracle Support can answer all doubt.
Any concern .. Contat Oracle Support to guide you in the best way to perform this work.
>
One wild suggestion was to:
1. Connect the New SAN.
2. Create New Diskgroups on New SAN from Oracle RAC env.
3. Backup the Production database and restore on the same Oracle RAC servers but on New Diskgroups.
4. Start the database from new Diskgroup location by updating the spfile/pfile
5. Make sure everything is fine then drop the current Diskgroups from Old SAN.
ASM Supports many Terabytes, if you need to migrate 3 Database with 20TB each using this way described above would be very laborious .. .. So add and remove Luns online is one feature that must work.
Take the approval from Oracle support and do this work using the ASM Rebalance.
Regards,
Levi Pereira

How to start Oracle 10g RAC database and clusterware?

I have steps to stop the 10g RAC Database and clusterware but not sure about starting it.
I have heard executing
$crsctl stop crs --as root
on each node
will start the database,asm,nodeapps .Is that true?
or we have to do that step by step like we do in stopping the clusterware and database below
1.Stop the agent:
cd to $AGENT_HOME/corpng04.amhc.amhealthways.net/bin, then run: ./emctl stop agent
2.Stop the full database
$ oracle_home/bin/srvctl stop database -d db_name
3.Stop the ASM Instances on node1,node2
$ oracle_home/bin/srvctl stop asm -n node -- I guess you can't give multiple nodes in one command with comma,you need to give this multiple times with diff node name
4.Stop the NodeApps :vip,listener,oms and gsd
$ oracle_home/bin/srvctl stop nodeapps -n node -- I guess you can't give multiple nodes in one command with comma,you need to give this multiple times with diff node name
5.Stop the CRS cluster processes :those bloody 3 evmd,ocssd,crsd
$su - root
$CRS_home/bin/crsctl stop crs

Paul R @ NL wrote:
before is shutting down crs i tend to stop the instances and services via srvctl then stop crs via crsctl
just the way i do it. not saying it's the right way but it is the one i am comfortable with.Good -) If we stop CRS, but forgot shutdown oracle instances ... we'll see shutdown abort in alert log file(that mean instances are shutdowned abort).
We should shutdown instance before stop CRS anyway.

Connetion of BI 7.0 to external oracle 10G R2 database system

Dear Experts,
We have BI 7.0 system with MS SQL server as database and we want to
connect it to database Oracle 10G R2.For that we followed the following
procedure.
1) In order to connect to the enterprise database, Oracle 10gR2 client
(runtime option should be fine) needs to be installed (you need admin
rights) on the machine where the connection is requested. -->We have
installed it.
2) You should make sure that Database server is reachable from the BI
SAP machine (ping, telnet, traceroute, etc).--> The tnsping is reaching
the database host.
3) Then a TNS connection name needs to be created --> We have created
the same.
Now after doing the above activities when we tried to create
sourcesystem in RSA1 we got the error as :
Cannot acces source system <External_dbname>
In the system log it is giving error as :
Database error 12154 at CON
ORA-12154: TNS:could not resolve the connect identifier
The Tnsnames.ora,Listener.ora and sqlnet.ora files are as follows:
<TNSNAMES.ORA>
tnsnames.ora Network Configuration File: C:\oracle\product\10.2.0\client_2\network\admin\tnsnames.ora
Generated by Oracle configuration tools.
ENTPRD =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = 10.190.0.174)(PORT = 1521))
    (CONNECT_DATA =
      (SERVICE_NAME = entprd)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
    (CONNECT_DATA =
      (SID = PLSExtProc)
      (PRESENTATION = RO)
<TNSNAMES.ORA>----
<LISTENER.ORA>
listener.ora Network Configuration File: C:\oracle\product\10.2.0\client_2\network\admin\listener.ora
Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = PLSExtProc)
      (ORACLE_HOME = C:\oracle\product\10.2.0\client_2)
      (PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = EIMREYMDD0.eimskip.net)(PORT = 1521))
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
<LISTENER.ORA>----
<SQLNET.ORA>
This file is actually generated by netca. But if customers choose to
install "Software Only", this file wont exist and without the native
authentication, they will not be able to connect to the database on NT.
SQLNET.AUTHENTICATION_SERVICES = (NTS)
<SQLNET.ORA>----

Dear Experts,
We have BI 7.0 system with MS SQL server as database and we want to
connect it to database Oracle 10G R2.For that we followed the following
procedure.
1) In order to connect to the enterprise database, Oracle 10gR2 client
(runtime option should be fine) needs to be installed (you need admin
rights) on the machine where the connection is requested. -->We have
installed it.
2) You should make sure that Database server is reachable from the BI
SAP machine (ping, telnet, traceroute, etc).--> The tnsping is reaching
the database host.
3) Then a TNS connection name needs to be created --> We have created
the same.
Now after doing the above activities when we tried to create
sourcesystem in RSA1 we got the error as :
Cannot acces source system <External_dbname>
In the system log it is giving error as :
Database error 12154 at CON
ORA-12154: TNS:could not resolve the connect identifier
The Tnsnames.ora,Listener.ora and sqlnet.ora files are as follows:
<TNSNAMES.ORA>
tnsnames.ora Network Configuration File: C:\oracle\product\10.2.0\client_2\network\admin\tnsnames.ora
Generated by Oracle configuration tools.
ENTPRD =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = 10.190.0.174)(PORT = 1521))
    (CONNECT_DATA =
      (SERVICE_NAME = entprd)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
    (CONNECT_DATA =
      (SID = PLSExtProc)
      (PRESENTATION = RO)
<TNSNAMES.ORA>----
<LISTENER.ORA>
listener.ora Network Configuration File: C:\oracle\product\10.2.0\client_2\network\admin\listener.ora
Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = PLSExtProc)
      (ORACLE_HOME = C:\oracle\product\10.2.0\client_2)
      (PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = EIMREYMDD0.eimskip.net)(PORT = 1521))
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
<LISTENER.ORA>----
<SQLNET.ORA>
This file is actually generated by netca. But if customers choose to
install "Software Only", this file wont exist and without the native
authentication, they will not be able to connect to the database on NT.
SQLNET.AUTHENTICATION_SERVICES = (NTS)
<SQLNET.ORA>----

Oracle 10g Infrastructure database unavailable alert message!!!

Dear All,
I have installed Oracle 10g AS on A machine & Oracle 10g Infrastructure on B machine both are in sync form means Middle-tier A machine configured with Infrastructure B machine well i am facing a problem for few days that in a day 4 or 5 times Infrastructure get down & i get the message on Machine B "Infrastructure database is unavailable" why this is happening? if someone knows how to overcome this problem please let me know how
Thanks,
Waheed

Dear have a look on below mentioned logs;
error.log
Error writing to log file. 68 messages lost.
[Fri Feb 03 10:43:42 2006] [error] [client 10.140.140.143] [ecid: 1138945421:10.140.140.143:3652:4112:7569,0] mod_plsql: /pls/orasso/htp.p HTTP-503 ORA-257 Proxy log On failed.Please verify that you have specified correct connectivity information i.e. username, password & connect-string in the DAD
HTTP_Server~1
06/09/28 18:52:16 Start process
fopen: No such file or directory
Apache.exe: could not open document config file d:/ohinfra/rdbms/demo/aqxml.conf
SSOServer.log
Thu Sep 28 15:51:54 GMT+05:00 2006 [ERROR] Orion Launcher SSO: DB Error. Please make sure the database is available and restart SSO Server
oracle.security.sso.server.util.DBException: Empty DB connect string. Could not create DB connection pool
     at oracle.security.sso.server.util.DBConnectionPool.init(DBConnectionPool.java:132)
     at oracle.security.sso.server.util.DBConnectionPool.init(DBConnectionPool.java:82)
     at oracle.security.sso.server.ui.SSOLoginServlet.init(SSOLoginServlet.java:233)
     at javax.servlet.GenericServlet.init(GenericServlet.java:258)
     at com.evermind.server.http.HttpApplication.loadServlet(HttpApplication.java:2141)
     at com.evermind.server.http.HttpApplication.findServlet(HttpApplication.java:4582)
     at com.evermind.server.http.HttpApplication.initPreloadServlets(HttpApplication.java:4676)
     at com.evermind.server.http.HttpApplication.initDynamic(HttpApplication.java:820)
     at com.evermind.server.http.HttpApplication.<init>(HttpApplication.java:542)
     at com.evermind.server.Application.getHttpApplication(Application.java:889)
     at com.evermind.server.http.HttpServer.getHttpApplication(HttpServer.java:690)
Further guide me...Please
Thanks,
Waheed

Is it possible to use Oracle Forms 10g with Oracle 10g Lite Database?

Hi All,
We are in process of migrating our forms from 6i to 10g environment.
We have two kinds of applications, one set run on general Oracle 11g database and the other set of forms run at the client machine using Oracle lite database.
We dont have any problem with Forms 6i to connect to Lite database as it allows to connect through ODBC:DSN names. When we try to connect to a lite database (10gR3) from Forms 10g through ODBC/DSN, it's not allowing and throwing the below error.
ORA-03121 : no interface driver connected - function not performed
Can someone tell me if there is something wrong in our approach? Also advise how to use Oracle Lite database with Forms 10G.
Sincerely,
Praveen Manthena

Hi,
I have experience with 6i with lite database 10g. There are two version of lite database one is multi language support and other one in english. There lang problem in connectivity with multi language 10g lite database. I done connectivity with single language connectivity of 6i with 10g lite database. You should try this one with forms 10g.
Regards,
Naveed Ali

Oracle 10g Example Database

Similar Messages

Maybe you are looking for