Oracle 10g Express Edition doesn't works on Win SBS 2011

Deutsch
Hallo zusammen!
Ich ein kleines Problem mit der Installation von Oracle 10g Express Edition Release 10.2.0.1.0. Zuerst, ich muss die ältere Version nehmen, weil das Programm welches dann auf Oracle zugreift sehr „sensibel“ ist und wohlmöglich mit der neueren Version 11g nicht klar kommt.
Die Version 10g habe ich nun auf einen Server mit Windows SBS 2011 Essentials SP1 64-Bit installiert. Doch leider bekomme ich nach der Installation keinen Zugriff zum Localhost 127.0.0.1:8080/apex. Weder mit IE noch mit Firefox.
Meine Frage wäre funktioniert die Version 10g auf Windows SBS 2011 mit 64-bit überhaupt und falls ja, wo müsste man eventuell in Windows noch etwas einstellen damit man Zugriff auf 127.0.0.1:8080/apex hat?
Vielen Dank vorab!
English
Hello at all!
I’ve some problems with the installation of Oracle 10g Express Edition Release 10.2.0.1.0. At first i must take the old version of Oracle, because the program which needs Oracle ist very “sensitive” and i fear this program doesn’t cope with the new version.
So i install the version 10g on a server with Windows SBS 2011 Essentials SP1 64-Bit. Unfortunately i don't get an access to the localhost 127.0.0.1:8080/apex. I try it with IE and Firefox.
My question is does Oracle 10g works on Windows SBS 2011 64-bit and if yes, is there any setting to do on Windows to get the an access to 127.0.0.1:8080/apex?
Thank!

does Oracle 10g works on Windows SBS 2011 64-bitYou can see supported OSes in System Requirements for Windows platforms.
As always, not certified does not necessarily mean it won't work, but if you have problems...

Similar Messages

Oracle 10g Express Edition - change default working directory for save ?

Greetings all,
I'm completely new to Oracle but I am quite sure that on Oracle 9i, when using the <save xyz.sql> statement, a file was saved somewhere on the hard drive.
I accidentaly managed to convince XE to save .sql files on C:\ but I would like to change that ...
Google refused to offer me a solution so I'm asking you guys for advice.
And no, <save desired_path\filename.sql> is not an option :P, I would like to make the change permanent.
Thank you in advance,

Hi,
If you are using Windows, you can edit your "SQLPlus 80" shortcut.
Changing the "start in" path to, e.g. "c:\sql" will do the trick. SQL+ commands such as "save" and "get" will now use "c:\sql" as default working directory.

Can i work with oracle 10g express edition by connecting it with visuval studio 2010?

i have oracle 10g-express edition,and visuval studio 2010, can i have a connectivity between these two?or it requires any additional installations,or any special procedures for installing it? HELP ME..

You might want to post this in the Oracle 10g XE support forum, where you might get a better response. The is is the support form for Oracle App Express..
Thank you,
Tony Miller
Monroe, WA

Java Connection Pooling issue with Oracle 10g Express Edition

Hello
I have a Java based web application that uses the Oracle 10g Express Edition database. I am using a connection pool to get connections to the database.
I use the NetBeans IDE and run my web application on the bundled Tomcat server(5.5.7) that comes with the IDE. Though when I initially run the application from the IDE, the connection pool is set up fine, when I recompile my java code and try to run the application again, I get the following error each time:
Listener refused the connection with the following error:
ORA-12516, TNS:listener could not find available handler with the
matching protocol stack.
The logs before the error shows up, indicate that the connection pool object is fine and gives me the number of available connections and the number of active connections and so on, which I have printed from the constructor of the Connection Pool class:
For e.g.:
Cache size = 17
Available Connections = 17
Cache Limit = 1000
Active size = 0
However, if I kill my Tomcat server process and run the application again, it works fine with no error.
I looked around for possible causes and solutions and all I could find
was increasing the processes parameter value in the init.ora file. I have increased the parameter value to from 100 to 20000 now, in increments of 500/1000 each time but it hasnt worked so far.
Someone else suggested that I increase the size of my connection pool; I initially had it set to a minimum limit of 5, an initial limit of 10 and a maximum limit of 1000. However if I set the Initial Limit to anything above 17 connections, I see the following log on the Bundled Tomcat log and my application doesn't run at all:
Log: Loading JDBC Driver : class=oracle.jdbc.driver.OracleDriver ...
Log: Loaded JDBC Driver
Log: Connection with URL=jdbc:oracle:thin:@localhost:1521:xe as username/password
Error code not handled : 0
Exception Message :java.sql.SQLException: Listener refused the connection with the following error:
ORA-12519, TNS: no appropriate service handler found
The Connection descriptor used by the client was:
localhost:1521:xe
// End of log
And the Bundled Tomcat server automatically shuts down.
Again the System.out statements from the Connection Pool class constructor show that the cache has been initialized and that currently there are free connections available in the pool.
E.g.
Cache size = 18
Available Connections = 18
Cache Limit = 1000
Active size = 0
Has anyone faced anything similar? Could someone please suggest what I'm doing wrong here and what I should do to set right this problem?
Swetha

hello, please pardon me, my english is basic. i do of my best. i had the same problem until reading the pdf documentation 2 days for java devvelloper.it is simple, follow this way.
try {OracleDataSource ds;
Connection conn;
ds = new OracleDataSource();
ds.setURL("jdbc:oracle:thin:@localhost");
conn = ds.getConnection("userid","password");
Statement stmt = conn.createStatement(ResultSet.TYPE_SCROLL_SENSITIVE, ResultSet.CONCUR_UPDATABLE);
don't forget to Dowload the user client of oracle Express Edition. do the rest of your program and it will work. take a look to the documentation pdf for java develloper. all it is explained. good look

Silent Installation Of Oracle 10g Expression Edition

Plz i need information about how to install Oracle 10g Expression Edition silently on multiple computer.....i get this script from Oracle site:
** Response file to perform silent install of Oracle Database 10g Express Edition **
** Values for the following variables are configurable: **
** szDir - Provide a valid path **
** TNSPort - Provide any valid available port number **
** MTSPort - Provide any valid available port number **
** HTTPPort - Provide any valid available port number **
** SYSPassword - Provide a valid password string **
** bOpt1 - 1 or 0 : 1 launches the Database Homepage at end of install and 0 doesn't **
[{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-DlgOrder]
Dlg0={F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-SdWelcome-0
Count=9
Dlg1={F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-SdLicense2Rtf-0
Dlg2={F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-SdComponentDialog-0
Dlg3={F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-AskTNSPort-13013
Dlg4={F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-AskMTSPort-13012
Dlg5={F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-AskHTTPPort-13014
Dlg3={F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-AskSYSPassword-13011
Dlg4={F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-SdStartCopy-0
Dlg5={F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-SdFinish-1
[{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-SdWelcome-0]
Result=1
[{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-SdLicense2Rtf-0]
Result=1
[{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-SdComponentDialog-0]
szDir=d:\oraclexe\TEST
Component-type=string
Component-count=1
Component-0=DefaultFeature
Result=1
[{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-AskTNSPort-13013]
TNSPort=1521
Result=1
[{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-AskMTSPort-13012]
MTSPort=2030
Result=1
[{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-AskHTTPPort-13014]
HTTPPort=8080
Result=1
[{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-AskSYSPassword-13011]
SYSPassword=oracle
Result=1
[{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-SdStartCopy-0]
Result=1
[{F0BC0F9E-C4A8-485C-93ED-424DB9EA3F75}-SdFinish-0]
Result=1
bOpt1=1
bOpt2=0
but i need how to link this script into the Setup file.
i urgently need ur help bro.................. let me know if u have some idea to fix this problem.
thz for advance.

It is important to define which OS you are working with.
Making a blind guess I will assume your are working on a windows environment (after this file fragment: "Dir=d:\oraclexe\TEST")
In order to perform a silent install on a windows environment you should:
- download the appropriate installation executable - eg. OracleXE.exe
     - download one of the silent install response file templates
     - edit the template with appropriate values for the install questions
     - run the Oracle XE installation and specify the location of the edited response file using a command similar to the following: OracleXE.exe /s /f1"<location of edited response file> /f2"<location of silent install log>
~ Madrid

Oracle 11g client / oracle 10g express edition in one computer

Hi All,
I already have Oracle 11g Client installed in my computer. I wanted to Install Oracle 10g Express Edition in the same computer. So that I shall work with that even when I am not in the network. My Question is : Will installing both of 11g Client and 10g XE will cause conflict in my computer or is it ok to install both. Any suggestion/information is appreciated.
Regards,
RRR

Hi,
i have installed oracle oraclient11g_home1, want to know the changes in tnsnames.ora.
below tnsnames.ora file got created after installation. I dont know
CONNECT_DATA=
          (SID=<oracle_sid>)
          [ (GLOBAL_NAME=<global_database_name>) ]
<alias>= [ (DESCRIPTION_LIST = # Optional depending on whether u have
                    # one or more descriptions
                    # If there is just one description, unnecessary ]
     (DESCRIPTION=
     [ (SDU=2048) ]     # Optional, defaults to 2048
                    # Can take values between 512 and 32K
     [ (ADDRESS_LIST=    # Optional depending on whether u have
                    # one or more addresses
                    # If there is just one address, unnecessary ]
     (ADDRESS=
          [ (COMMUNITY=<community_name>) ]
          (PROTOCOL=tcp)
          (HOST=<hostname>)
          (PORT=<portnumber (1521 is a standard port used)>)
     [ (ADDRESS=
          (PROTOCOL=ipc)
          (KEY=<ipckey (PNPKEY is a standard key used)>)
     [ (ADDRESS=
          [ (COMMUNITY=<community_name>) ]
          (PROTOCOL=decnet)
          (NODE=<nodename>)
          (OBJECT=<objectname>)
... # More addresses
     [ ) ] # Optional depending on whether ADDRESS_LIST is used or not
     [ (CONNECT_DATA=
          (SID=<oracle_sid>)
          [ (GLOBAL_NAME=<global_database_name>) ]
     [ (SOURCE_ROUTE=yes) ]
     (DESCRIPTION=
     [ (SDU=2048) ]     # Optional, defaults to 2048
                    # Can take values between 512 and 32K
     [ (ADDRESS_LIST= ]     # Optional depending on whether u have more
                    # than one address or not
                    # If there is just one address, unnecessary
     (ADDRESS
          [ (COMMUNITY=<community_name>) ]
          (PROTOCOL=tcp)
          (HOST=<>)
          (PORT=<1521>)
     [ (ADDRESS=
          (PROTOCOL=ipc)
          (KEY=<ipckey (PNPKEY is a standard key used)>)
     ...           # More addresses
     [ ) ]           # Optional depending on whether ADDRESS_LIST
                    # is being used
     [ (CONNECT_DATA=
          (SID=<oracle_sid>)
          [ (GLOBAL_NAME=<global_database_name>) ]
     [ (SOURCE_ROUTE=yes) ]
     [ (CONNECT_DATA=
     (SID=<oracle_sid>)
     [ (GLOBAL_NAME=<global_database_name>) ]
     ... # More descriptions
     [ ) ]     # Optional depending on whether DESCRIPTION_LIST is used or not

Columns Display Support in Oracle 10g Express Edition..................

I am working with the Oracle 10g Express Edition, and I Created a Table with 52 Fields and even successfully inserted data into the table via Java Program. But the problem is when I am displaying the table from the Oracle 10g Express Edition Interface, it is displaying only first 31 Fields and displaying "<div class="fielddata">First 31 columns displayed.</div>". What should i do if I want to display all the 52 columns. Awaiting for the Reply. Thank You..

duplicate post
Columns Display Support in Oracle 10g Express Edition..................

Error in Oracle 10g Express Edition

Hi Guys,
While am start the Database in Oracle 10g Express Edition, it showing error like process has been already started
Can anyone give the advice to resolve this problem
Thanks in advance
Dhiva

While am start the Database in Oracle 10g Express EditionHow ?
it showing error like process has been already startedWell, so it works ? Did you try to connect ?

I have a problem with oracle 10g express edition

Hello,
I have just installed oracle 10g express edition and I have a problem with the script editor. I can write anything in the window that appears below buttons undo,redo and find, It is like disabled. I use windows XP, Firefox 2.0 ( I have also tried with Iexplorer and It does not work either). I have javascript enabled.
anyone knows what is the problem?
Later,I have installed it in a virtual machine of Windows 2003 Server and It works well but I`d rather use it in my Microsoft XP
Thank you very much
Fernando Martínez

It looks like you can fix this if you replace the codearea.xbl.xml and codearea.iframe.html files in the
/i/editor folder with files from an Apex 2.2.1 installation - such as the one on apex.oracle.com.
Since I don't know what the licensing implications are, I will let you figure out the details.

Not installing Oracle 10g Express Edition Beta 2

Hi,
I am in problem to install Oracle 10g Express Edition Beta 2 on Windows 2000 Pro. I have download OracleXE.exe but when i am double clicking on it, it is not working. What are the problems? Please help me
Dulal

Hello,
Oracle 10g XE is rather specific and, I'm not sure that you can upgrade it to 10.2.0.4 .
However, Oracle published an Upgrade Guide for Oracle Express Edition but, it's limited to *10.2.0.3*:
http://download.oracle.com/docs/cd/B25329_01/doc/server.102/b32391/toc.htm
But be careful:
Once you have upgraded to Oracle Database 10g, you cannot downgrade back to Oracle Database Express Edition.Hope this help.
Best regards,
Jean-Valentin
Edited by: Lubiez Jean-Valentin on May 22, 2010 12:06 AM

An issue while installing oracle 10g express edition on Ubuntu 10.04-64bit

Hi,
I'm running into an issue while installing oracle 10g express edition on my Ubuntu 10.04-64 bit installed machine using oracle-xe-universal_10.2.0.1-1.0_i386.deb package. The issue actually came up when I was trying to reinstall the package after uninstalling it due to some problem I had with my login credentials. To elaborate further on it, the /etc/init.d/oracle-xe script does not get created when I execute the debian package and thus i'm unable to configure the required credentials and stuff after the installation. I doubt whether this has something to do with the procedure I followed when uninstalling the previous package it. But what I did was just what's mentioned in the following [http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25144/toc.htm] user guide published by oracle.
Another important clue would be, the platform of my machine is amd64bit although I'm dealing with an installation package preferred for i386. But I believe it's the only thing available in the oracle software download section. Hence I had to use the --force-architecture option to install it. But after reading some post published on this forum, I've figured out that it does not affect the usual execution of the software. Anyway, I would greatly appreciate some help on this matter.
[1] http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25144/toc.htm
Thanks and Regards,
Prabath Abeysekara
Edited by: 829281 on Jan 18, 2011 7:52 PM

Hi,
Finally I've managed to find a solution for this issue. Thanks a lot for all the replies.
Here's how I got rid of it.
Addressing all the facts one by one,
1.The problem of not getting the /etc/init.d/oracle-xe script generated was avoided
by removing all the configuration files that were previously created while installing
the product. The following command can be used to accomplish that task.
*$ dpkg --purge oracle-xe*
2.Next, Initially the password I used during the configuration process was "admin".
Although I tried a couple of times installing the product providing the aforementioned
password, the web UI kept prompting "Invalid Credentials" message not allowing me
to login. But, this particular issue could be avoided by giving some other simple
password.
Finally, got it working and once again thanks a bunch for taking the burden of
replying this thread.
Cheers,
Prabath

Oracle 10g Express Edition and Forms 6i

Hi,
Need to know if Oracle 10g express edition supports forms 6i or not?
Please advise.
Thanks you very much.

Thanks for the answers.
Yes, XE universal does not work, but XE Western European does. I am having a hard time to configure Net8. The net configuration tools simply crash right away every time I try to run them. The sql*plus on form side crashes when I hit the connect button. The only thing that can run with no problem is form. I had to manually edit the tnsnames.ora file on form side, setting host=computer name and sid=XE. Tried many times until it worked.

Can I import a tablespace into Oracle 10g Express Edition

I am very new to Oracle 10g Express Edition. We have a server running Oracle Enterprise Edition and we have been creating a transportable tablespace to be imported into a few servers. This works fine for us. I would like to find out if I can import the tablespace into Oracle 10g Express Edition. Someone told me that I should be able to do that but I have no clue to how to do it. If this is possible, can someone tell where to find the information how to do this.
Thanks,
RJ

I finally tried it and I got the following errors:
IMP-00017: following statement failed with ORACLE error 721:
"BEGIN sys.dbms_plugts.checkCompType('COMPATSG','10.2.0.2.0'); END;"
IMP-00003: ORACLE error 721 encountered
ORA-00721: changes by release 10.2.0.2.0 cannot be used by release 10.2.0.1.0
ORA-06512: at "SYS.DBMS_PLUGTS", line 2004
ORA-06512: at line 1
IMP-00000: Import terminated unsuccessfully
Am I right that the server that I exported the tablespace is using Oracle 10.2.0.2.0 while Oracle Express is 10.2.0.1.0? I looked around and I did not see Oracle Express version 10.2.0.2.0 that I can download. Is there a patch or something to upgrade it?
Thanks,
RJ

Oracle 10g Express Edition performances

I'm looking for something about performances of Oracle 10g Express Edition to make a little presentation for the University. Can anyone help me?
Thnaks

I'm looking for something about performances of
Oracle 10g Express Edition to make a little
presentation for the University. Can anyone help me?What's the matter with the docco? 1 processor only, 1GB ram, one db
and 4GB disk.
As to how this will affect your* performance, this can only be
done by you testing under given conditions. However, if you are doing
Uni work, why not use the EE - you only have to pay for deployment AFAIK.

What we actually doing with oracle 10g Express Edition???

Hi all,
i'm a housewife.... i like to work on oracle which is very new to me.... so i recently downloaded "oracle 10g Express Edition" from oracle.com....
i got
run sql commamd line
get started
backup database
start database
stopdatabase
go to database homepage
why those all above???? how i can practice myself on exp' edition???.... actually what the s/w engineers do with express edition???
i follow the instructions given for get started....
i can view sometables which already exist....
what is the use with that.....i don't have any idea when work with get started.....i just follow the instruction given on help and create a table....
what is the actual use of express edition???

Hi,
10g express edition (XE) is free database version of 10g. Application Express (Apex) is already installed to it.
Apex version that comes with XE is 2.1.
You can upgrade it to version 3.2.1 witch is latest one. New version of Apex comes with some nice features like interactive reports.
If you have installed XE you are ready to go developer Apex applications and practice Oracle database
Edit:
http://www.oracle.com/technology/products/database/application_express/html/apex_and_xe.html
Br, Jari
Edited by: jarola on Aug 31, 2009 7:48 AM

Oracle 10g Express Edition doesn't works on Win SBS 2011

Similar Messages

Maybe you are looking for