Oracle 10g Express Edition E-Mail Capability?

Hello all,
We plan to deploy Express Edition for a project. I wonder is there any limitation on Express Edition to send e-mail with PL/SQL? Would it be a problem?
Thanks in advance...

Hello,
Application Express (which is pre-installed in XE) include the APEX_MAIL package which can easily be used to send emails (note that it's for sending only...not for receiving).
The only 'big' limitatation at the moment with APEX_MAIL is that it doesn't currently support attachments, however APEX 3.1 which is just around the corner changes that (i.e. you will be able to send attachments).
For any more complex things, you can always drop down to UTL_MAIL, however APEX_MAIL should suit 99% of your requirements.
Hope this helps,
John.
http://jes.blogs.shellprompt.net

Similar Messages

Oracle 10g Express edition,can't visit database homepage

I have installed Oracle 10g Express edition without error meggage, It seems goes well ,but when I want to visit my database_homepage on http://127.0.0.1:8080/apex, I see this:
The page cannot be displayed
There is a problem with the page you are trying to reach and it cannot be displayed.
Please try the following:
Click the Refresh button, or try again later.
Open the Web site home page, and then look for links to the information you want.
If you believe you should be able to view this directory or page, please contact the Web site administrator by using the e-mail address or phone number listed on the Web site home page.
10061 - Connection refused
Internet Security and Acceleration Server
Technical Information (for support personnel)
Background:
The server you are attempting to access has refused the connection with the gateway. This usually results from trying to connect to a service that is inactive on the server.
ISA Server: csscisaser
Via:
Oracle is installed on my own computer.I think ISA should do nothing with it.And I have removed proxy setting in Internet exploer,but the error still happed.
I used netstat-a,and can find this:
proto :tcp
local address: myxxxxxx:8080
foreign address myxxxxxx:0
state : listening
does it mean my oracle http listener is started?

Open a command line and
- enter ping 127.0.0.1 ... should tell whether
connectivity is possible. If not, something is
blocking, and that something is usually a firewall.ping 127.0.0.1. I can connect to 127.0.0.1,very fast.but when I ping 127.0.0.1:8080 ,Can't get response.
enter ipconfig /all
enter and post output of lsnrctl status
There are so many output content.And you may see some #^$*#*&^$#@&* because I'm using Chinese version Oracle and OS.
IPconfig
Windows IP Configuration
        Host Name . . . . . . . . . . . . : cjis-e89f34e63f
        Primary Dns Suffix . . . . . . . :
        Node Type . . . . . . . . . . . . : Hybrid
        IP Routing Enabled. . . . . . . . : No
        WINS Proxy Enabled. . . . . . . . : No
        DNS Suffix Search List. . . . . . : xxxx.wan
Ethernet adapter 本地连接:
        Connection-specific DNS Suffix . : xxxx.wan
        Description . . . . . . . . . . . : Broadcom NetXtreme 57xx
roller
        Physical Address. . . . . . . . . : xx-13-72-7D-67-8B
        Dhcp Enabled. . . . . . . . . . . : Yes
        Autoconfiguration Enabled . . . . : Yes
        IP Address. . . . . . . . . . . . : 172.18.9.30
        Subnet Mask . . . . . . . . . . . : 255.255.255.0
        Default Gateway . . . . . . . . . : 172.18.9.252
        DHCP Server . . . . . . . . . . . : 172.18.18.9
        DNS Servers . . . . . . . . . . . : 172.18.18.9
        Primary WINS Server . . . . . . . : 172.18.18.9
        Lease Obtained. . . . . . . . . . : 2007年7月16日 15:51:15
        Lease Expires . . . . . . . . . . : 2007年7月24日 15:51:15
LSNRCTL status
正在连接到 (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
LISTENER 的 STATUS
别名                      LISTENER
版本                      TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Prod
ction
启动日期                  20-7月 -2007 11:19:13
正常运行时间              0 天 2 小时 17 分 10 秒
跟踪级别                  off
安全性                    ON: Local OS Authentication
SNMP                      OFF
默认服务           XE
监听程序参数文件          C:\oraclexe\app\oracle\product\10.2.0\server\network\
dmin\listener.ora
监听程序日志文件          C:\oraclexe\app\oracle\product\10.2.0\server\network\
og\listener.log
监听端点概要...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=cjis-e89f34e63f)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=8080))(Presentation
HTTP)(Session=RAW))
服务摘要..
服务 "CLRExtProc" 包含 1 个例程。
例程 "CLRExtProc", 状态 UNKNOWN, 包含此服务的 1 个处理程序...
服务 "PLSExtProc" 包含 1 个例程。
例程 "PLSExtProc", 状态 UNKNOWN, 包含此服务的 1 个处理程序...
服务 "XEXDB" 包含 1 个例程。
例程 "xe", 状态 READY, 包含此服务的 1 个处理程序...
服务 "XE_XPT" 包含 1 个例程。
例程 "xe", 状态 READY, 包含此服务的 1 个处理程序...
服务 "xe" 包含 1 个例程。
例程 "xe", 状态 READY, 包含此服务的 1 个处理程序...
['/pre']
Display contents of
C:\windows\system32\drivers\etc\hosts.['pre']
# Copyright (c) 1993-1999 Microsoft Corp.
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
# For example:
#      102.54.94.97     rhino.acme.com          # source server
#       38.25.63.10     x.acme.com              # x client host
127.0.0.1       localhostMessage was edited by:
sailfish83

Oracle 10g Express Edition installation problem in windowsXP

while installing the Oracle 10g Express Edition in windows XP ,
it is showing an error like this ,
the cabinet file 'Data1.cab' required for this installation is corrupt and cannot be used. This could indicate a network error.
If anybody knows solution to this problem plz mail me to this email id
[email protected]

I think you should probably download the file again, it might be corrupt.
~Jer

Email in Oracle 10g Express Edition

Hi,
Can i send email with utl_smtp, utlmail or utl_tcp (after jvm installation) in Oracle 10g Express Edition?
Thanks

Hi,
Example using the utl_smtp :-
PROCEDURE send_mail (p_sender IN VARCHAR2,
p_recipient IN VARCHAR2,
p_message IN VARCHAR2)
as
l_mailhost VARCHAR2(255) := 'aria.us.oracle.com';
l_mail_conn utl_smtp.connection;
BEGIN
l_mail_conn := utl_smtp.open_connection(l_mailhost, 25);
utl_smtp.helo(l_mail_conn, l_mailhost);
utl_smtp.mail(l_mail_conn, p_sender);
utl_smtp.rcpt(l_mail_conn, p_recipient);
utl_smtp.open_data(l_mail_conn );
utl_smtp.write_data(l_mail_conn, p_message);
utl_smtp.close_data(l_mail_conn );
utl_smtp.quit(l_mail_conn);
end;
Thanks
Pavan Kumar N

Oracle 10g Express edition on Open Suse 10.2 mahine Insatllation vows !

The Installation Oracle 10g Express edition on Open Suse 10.2 mahine,
requried the installation of libaio... i installed the package by smart ....
after that installation was fine...
but when i try to login :
following exception occurs :
oracleXE: error while loading shared libraries: libaio.so.1: cannot open shared object file: No such file or directory
I reinstalled oracle and libaio but result was same .. ..
"rpm -q libaio" prints "libaio-0.3.104-32"
I tried to install Oracle libaio package .. i downlaoded it from Oracle web site...
but it gave following exception :
checking for libaio >= 0.3... no
checking for libaio 0.1... no
configure: error:
*** libaio is required.
smart info libaio output :
Name: libaio
Version: 0.3.104-32@i586
Priority: 0
Group: System/Libraries
Installed Size: 31.3kB
Reference URLs:
Flags: new
Channels: SUSE 10.2 Repository
Summary: Linux-Native Asynchronous I/O Access Library
Description:
The Linux-native asynchronous I/O facility ("async I/O", or
"aio") has a
richer API and capability set than the simple POSIX async I/O facility.
This library provides the Linux-native API for async I/O.
The POSIX async I/O facility requires this library to provide
kernel-accelerated async I/O capabilities, as do applications that
require the Linux-native async I/O API.
Name: libaio
Version: 0.3.104-32@x86_64
Priority: 0
Group: System/Libraries
Installed Size: 31.9kB
Reference URLs:
Flags: new
Channels: RPM System; SUSE 10.2 Repository
Summary: Linux-Native Asynchronous I/O Access Library
Description:
The Linux-native asynchronous I/O facility ("async I/O", or "aio") has
a richer API and capability set than the simple POSIX async I/O
facility. This library provides the Linux-native API for async I/O. The
POSIX async I/O facility requires this library to provide
kernel-accelerated async I/O capabilities, as do applications that
require the Linux-native async I/O API.
Please help...
-jasdeep

It probably isn't visible by your oracle environment, please verify the value of your LD_LIBRARY_PATH, PATH, and ORACLE_HOME environment variables.
~ Madrid.

How can i create a new database instance in oracle 10g express edition?

hello everybody
i'm a student
i am developing a database application
i'm using oracle 10g express edition
to run my application i need to create another database instance
but i didn't find any option for doing so in that product
if there is pls tell me where it is?
if not pls tell me how to manually create it?
regards,
Chaitanya

Chaitanya Babu M wrote:
yaa i'm sure about that .
i want one more instance of database.Can you perhaps explain why? I have a fair share of production and development servers - and not a single one of them needs to run more than one database instance.
So I'm interested in what requirement you are trying to satisfy by using two database instances on a single platform.
Oh yeah - if you want to create a custom XE instance (different SID, different tablespace sizes, more/less PL/SQL stuff installed, hack standard), make a copy of your XE db creation script (in your XE's +$ORACLE_HOME/bin+ and called createdb.sh ) and modify that for your needs.
PS. even with a different SID, only a single XE instance can be run at a time - you can however have 2 different ones defined and then use one at a time (e.g. testing international settings, init param differences, etc.)

Can't uninstall or reinstall oracle 10g express edition in w/server 2003

Hi,
I need help from all of you, i already install oracle 10g express edition in
windows server 2003 in D drive. but i can't remove because the oracle not in
the add remove program so i download the windows install clean up to remove
but after remove it still in the all program i still can start and stop the
database but can't go to the database home page.The error message (the install
cannot proceed as service OracleServiceXE is present on the system. Remove the
service , reboot the systemand retry the installation) can any one guide me to use
command prompt to remove.
My email address [email protected]
Thanks

Hi,
Perform the following steps, this will solve your problem and can go with new installation. :-)
(Only perform the steps 7.2 section and here is the link : http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25143/toc.htm#BABDJDCD
Manually Removing Oracle Database XE
If the deinstallation is interrupted, follow these steps to manually remove Oracle Database XE from your computer:
Step 1: Stop the Oracle Database XE Services
Step 2: Remove the Oracle Database XE Registry Editor Settings
Step 3: Update the System Variable Path
Step 4: Remove Oracle Database XE from the Start Menu and Desktop
Step 5: Remove the Oracle Database XE Directories
Step 6: Install and Run the Windows Installer CleanUp Utility
7.2.1 Step 1: Stop the Oracle Database XE Services
Follow these steps:
1. Open the Windows Services utility: From the Start menu, select All Programs, then Administrative Tools, and then Services.
2. If any of the following Oracle services exist and have the status Started, then select each of the services, and click Stop:
OracleXE
OracleXETNSListener
OracleJobSchedulerXE
OracleXEClrAgent
OracleMTSRecoveryService
3.
Exit Services.
See also the Microsoft online help for more information on stopping services.
7.2.2 Step 2: Remove the Oracle Database XE Registry Editor Settings
Follow these steps:
1.
Log on to Windows with Windows administrative privileges.
2.
Ensure that you followed the instructions under "Step 1: Stop the Oracle Database XE Services" to stop the Oracle Database XE services.
3.
Start the Registry Editor at a command prompt:
SYSTEM_DRIVE:\> regedit
4.
Go to HKEY_CLASSES_ROOT.
5.
Delete the following keys:
NEED TO CONFIRM THE XE-SPECIFIC ONES.
6.
Go to HKEY_CURRENT_USER\Software.
7.
Under Microsoft\Windows\CurrentVersion\Explorer\MenuOrder\Start Menu\Programs, delete the Oracle Database 10g Express Edition key.
8.
Go to HKEY_LOCAL_MACHINE\SOFTWARE and search for the ORACLE group key.
9.
Expand the ORACLE group key and then delete the KEY_XE and OracleMTSRecoveryService keys.
10.
Go to HKEY_LOCAL_MACHINE\SOFTWARE\ODBC\ODBCINST.INI.
11.
Expand the ODBCINST.INI key and remove the Oracle in XE key.
12.
Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services.
13.
Delete the following keys:
OracleServiceXE
OracleXEClrAgent
OracleXETNSListener
14.
Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Eventlog\Application.
15.
Delete the Oracle.xe key.
16.
Exit the Registry Editor.
17.
Restart your computer.
Thanks,
Rams...
Edited by: user10888288 on May 3, 2010 5:58 AM

Can't uninstall or reinstall oracle 10g express edition in windows server 2

Hi,
I need help from all of you, i already install oracle 10g express edition in windows server 2003 in D drive. but i can't remove because the oracle not in the add remove program so i download the windows install clean up to remove
but after remove it still in the all program i still can start and stop the database but can't go to the database home page. can any one guide me to use command prompt to remove.
Thanks

Hi,
I need help from all of you, i already install oracle 10g express edition in windows server 2003 in D drive. but i can't remove because the oracle not in the add remove program so i download the windows install clean up to remove
but after remove it still in the all program i still can start and stop the database but can't go to the database home page. can any one guide me to use command prompt to remove.
Thanks

Oracle 10g Express Edition presentation

Hi everybody,
I'm an Italian university student and I have to make a presentation about Oracle 10g Express Edition for an exam. The points of this presentation will be:
- Portability
- Compatibility with SQL92 standard
- Interfaces
- Installation and hardware resources
- Costs and license
- Security
- Performance
I'm very new in the Oracle world, can anyone help me or suggest sites where I can retrieve the information I need.
Thanks

Si offende qualcuno o semplicemente capisce meno gente? Penso più la seconda, ma mi sembra più "educato" usare l'inglese, in modo che tutti capiscano.
Translation :
I think it would be more correct using English, so that everyone can understand.
Paolo

Oracle 10G EXPRESS EDITION suitable for windows7

hi to all
can u guys plz provide me the oracle 10g express edition download link for windows7
i had already downloaded one for windows7 but when i go to instal it i cant able to run it, and that to the downlOaded file says THE PUBLISHER OF THIS PROGRAM COULDN'T BE VERIFIED.
SO CAN U PLZ PROVIDE ME LINK ASAP.
THANKS IN ADVACE.

yaa.i downloaded the oracleXEUNIV FILE.
but the file dont have the .exe extension,and i cant able to run it.
after i run the file
the system says
DO U WANT TO OPEN THE FILE
i click on OPEN
THEN is shows OPEN WITH INTERNET EXPLORER,ADOBE.........
CAN U PLZ LET ME HOW TO INSATLL IT..

Oracle 10g Express Edition Host , Port, ServiceId(SID)

Hi
I am trying to connect Oracle 10g Express Edition from Net Beans. But it is prompting for the following detials.
Host , Port, ServiceId(SID).
Please help me .
Thanks in Advance.
PurnachandraRao.

Drop down to a command line. Enter the command 'lsnrctl status'. That will tell you all this information.
Often it is 'localhost', port 1521, and always SID=XE

Oracle 10g Express Edition

Hi All,
A newbie quesion. I have Oracle 8i in my laptop, I want to install Oracle 10g Express edition, can i have both together ?
Regards
Ravi Kumar

Yes, you can have as many Oracle homes as you require and as the host can hold, as long as you are careful and disciplined with the way you manage your ORACLE_HOME and PATH environment variables.
~ Madrid
http://hrivera99.blogspot.com

Oracle 10g express edition can support forms 6i & reports

I have installed oracle 10g express edition and installed forms 6i. while connecting forms 6i into ora 10g express edition it is not connecting in windown xp platform.
It is showing only "dont send error". I want to know oracle 10g express edition can support forms & reports.
Please give me solution.
Thanks
Govindarajan

this is from metalink :(https://metalink.oracle.com/metalink/plsql/f?p=140:1:8190633972492825) for windows 2003
Application Tier Certifications
OS      Product      Server      Status      Addtl.      Info.      Components      Other      Issues
2003      6.0.8.26.0 Patch 17      9.2      Desupported      Yes      Yes      N/A      N/A
2003      6.0.8.26.0 Patch 17      10g      Desupported      Yes      Yes      N/A      N/ASeems you are right, but if you filter only certified version result is NONE!
And anther link is prooving that:
https://metalink.oracle.com/metalink/plsql/f?p=200:27:8190633972492825::::p27_id,p27_show_header,p27_show_help:609971.992,1,1
Nice start to read is:
http://www.oracle.com/technology/products/forms/htdocs/FormsSOD.html

Oracle 10g Express Edition Limitations

hi,
i want to know the limitations of Oracle 10g Express edition ,, yesterday i got a problem when reconfiguring SGA of one of our client's Oracle Express edition database. i was resizing it from 140MB to 800MB,, n got errors.. plz gimme some links which can state the limitations of memory usage for Oracle Express ed...
Thanx
Muhammad Umar Liaquat

How about this link?
http://download-uk.oracle.com/docs/cd/B25329_01/doc/install.102/b25143/toc.htm#BABIECJA
And for comparison:
http://www.oracle.com/database/product_editions.html
C.

Oracle 10g Express Edition Beta 3 ODBC Driver Always Crashes

I find that if you set up an ODBC Data Source for Oracle 10g Express Edition on Windows XP SP2 using the "Oracle in XE" driver, anything that tries to access it will crash, even the Windows ODBC Data Source Administratior if you click the "Test Connection" button.
Having clicked the button, you get a window coming up entitled "Oracle ODBC Driver" with a yellow exclamation mark in it, with no other text in the window except for an OK button.
If you press OK, then it crashes and goes through the "Please tell Microsoft about this problem" process....

Hi,
Thanks for your comment, but I can't get onto the XE forum.
I found http://www.oracle.com/technology/products/database/xe/forum.html which says:
Forum registration is possible only by downloading and installing Oracle Database XE. After installation, click on the "Registration" link from the Database homepage.
However I find that the "Database Homepage" does not exist.
Choosing the Oracle XE "Go To Database Home Page" takes my browser to http://127.0.0.1:8080/apex which is not available even though my oracle server is running and sqlplus can talk to it.
There's definitely nothing serving on tcp port 8080, as follows:
[dcampbel@clevo]~> telnet localhost 8080
Trying 127.0.0.1...
telnet: Unable to connect to remote host: Connection refused
Regards,
-- Dave

Oracle 10g Express Edition E-Mail Capability?

Similar Messages

Maybe you are looking for