Oracle 10g Express Edition Host , Port, ServiceId(SID)

Hi
I am trying to connect Oracle 10g Express Edition from Net Beans. But it is prompting for the following detials.
Host , Port, ServiceId(SID).
Please help me .
Thanks in Advance.
PurnachandraRao.

Drop down to a command line. Enter the command 'lsnrctl status'. That will tell you all this information.
Often it is 'localhost', port 1521, and always SID=XE

Similar Messages

Oracle 10g Express Edition, how to set SID

Hi, all
anybody know is that option to define SID on this 10g Express Editino I installed on Windows xp, 32 ?
Tried to find config file or set ORACLE_SID from command line and failed.
I've tried XE, orcl but got "IE error minus 1 on read call".
Ping on my ip/port is succefull.
I'm trying to attache Aqua Studio I still have lisence for for this db.
Tx
Trent

Hi;
What is your OS? Check below thread- Sabdar Syed post
How to check SID
From his post:
Run - > regedit -> HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE
or
My computers - > (right click) properties -> advanced -> environment variables -> system variables -> check for ORACLE_SID variable, if any set.
or
Go to the do prompt and type as
C:\> set ORACLE_SID (This will show if any ORACLE_SID is already set).
C:\> set (To know all the parameters set)
When you find your SID use below syntax
set ORACLE_SID= your_sid
Regard
Helios

Oracle 11g client / oracle 10g express edition in one computer

Hi All,
I already have Oracle 11g Client installed in my computer. I wanted to Install Oracle 10g Express Edition in the same computer. So that I shall work with that even when I am not in the network. My Question is : Will installing both of 11g Client and 10g XE will cause conflict in my computer or is it ok to install both. Any suggestion/information is appreciated.
Regards,
RRR

Hi,
i have installed oracle oraclient11g_home1, want to know the changes in tnsnames.ora.
below tnsnames.ora file got created after installation. I dont know
CONNECT_DATA=
          (SID=<oracle_sid>)
          [ (GLOBAL_NAME=<global_database_name>) ]
<alias>= [ (DESCRIPTION_LIST = # Optional depending on whether u have
                    # one or more descriptions
                    # If there is just one description, unnecessary ]
     (DESCRIPTION=
     [ (SDU=2048) ]     # Optional, defaults to 2048
                    # Can take values between 512 and 32K
     [ (ADDRESS_LIST=    # Optional depending on whether u have
                    # one or more addresses
                    # If there is just one address, unnecessary ]
     (ADDRESS=
          [ (COMMUNITY=<community_name>) ]
          (PROTOCOL=tcp)
          (HOST=<hostname>)
          (PORT=<portnumber (1521 is a standard port used)>)
     [ (ADDRESS=
          (PROTOCOL=ipc)
          (KEY=<ipckey (PNPKEY is a standard key used)>)
     [ (ADDRESS=
          [ (COMMUNITY=<community_name>) ]
          (PROTOCOL=decnet)
          (NODE=<nodename>)
          (OBJECT=<objectname>)
... # More addresses
     [ ) ] # Optional depending on whether ADDRESS_LIST is used or not
     [ (CONNECT_DATA=
          (SID=<oracle_sid>)
          [ (GLOBAL_NAME=<global_database_name>) ]
     [ (SOURCE_ROUTE=yes) ]
     (DESCRIPTION=
     [ (SDU=2048) ]     # Optional, defaults to 2048
                    # Can take values between 512 and 32K
     [ (ADDRESS_LIST= ]     # Optional depending on whether u have more
                    # than one address or not
                    # If there is just one address, unnecessary
     (ADDRESS
          [ (COMMUNITY=<community_name>) ]
          (PROTOCOL=tcp)
          (HOST=<>)
          (PORT=<1521>)
     [ (ADDRESS=
          (PROTOCOL=ipc)
          (KEY=<ipckey (PNPKEY is a standard key used)>)
     ...           # More addresses
     [ ) ]           # Optional depending on whether ADDRESS_LIST
                    # is being used
     [ (CONNECT_DATA=
          (SID=<oracle_sid>)
          [ (GLOBAL_NAME=<global_database_name>) ]
     [ (SOURCE_ROUTE=yes) ]
     [ (CONNECT_DATA=
     (SID=<oracle_sid>)
     [ (GLOBAL_NAME=<global_database_name>) ]
     ... # More descriptions
     [ ) ]     # Optional depending on whether DESCRIPTION_LIST is used or not

Connecting oracle 10g express edition to jdeveloper

I am having all kinds of problems connecting oracle 10g express edition with my jdeveloper 10.1.3.3. I can query the database from my command line so I know it is set up, but for whatever reason jdeveloper will not connect with it. When I try to connect with the database through jdeveloper here is the error I keep getting:
Listener refused the connection with the following error:
ORA-12518, TNS:listener could not hand off client connection
The Connection descriptor used by the client was:
localhost:1521:ORCL
I have been all through the google results looking for an answer and have come to the conclusion that it is something with either the listerner file or the tns file, but as of yet have been unable to locate them. here are both of those files too.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(ADDRESS = (PROTOCOL = TCP)(HOST = ##########)(PORT = 1521))
DEFAULT_SERVICE_LISTENER = (XE)
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = #########)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
Please any help would be appreciated I have been at this for days, thanks.

This has to be some kind of bug with 10g express because I see lots of people having similar problems. I'm in the process of uninstalling 10g, and I will re-install it see if that makes a difference. Again if anyone has any other ideas please keep them coming because this is utter BS it shouldn't be this hard.

Oracle 10g Express Edition Beta 3 ODBC Driver Always Crashes

I find that if you set up an ODBC Data Source for Oracle 10g Express Edition on Windows XP SP2 using the "Oracle in XE" driver, anything that tries to access it will crash, even the Windows ODBC Data Source Administratior if you click the "Test Connection" button.
Having clicked the button, you get a window coming up entitled "Oracle ODBC Driver" with a yellow exclamation mark in it, with no other text in the window except for an OK button.
If you press OK, then it crashes and goes through the "Please tell Microsoft about this problem" process....

Hi,
Thanks for your comment, but I can't get onto the XE forum.
I found http://www.oracle.com/technology/products/database/xe/forum.html which says:
Forum registration is possible only by downloading and installing Oracle Database XE. After installation, click on the "Registration" link from the Database homepage.
However I find that the "Database Homepage" does not exist.
Choosing the Oracle XE "Go To Database Home Page" takes my browser to http://127.0.0.1:8080/apex which is not available even though my oracle server is running and sqlplus can talk to it.
There's definitely nothing serving on tcp port 8080, as follows:
[dcampbel@clevo]~> telnet localhost 8080
Trying 127.0.0.1...
telnet: Unable to connect to remote host: Connection refused
Regards,
-- Dave

Oracle 10g Express edition,can't visit database homepage

I have installed Oracle 10g Express edition without error meggage, It seems goes well ,but when I want to visit my database_homepage on http://127.0.0.1:8080/apex, I see this:
The page cannot be displayed
There is a problem with the page you are trying to reach and it cannot be displayed.
Please try the following:
Click the Refresh button, or try again later.
Open the Web site home page, and then look for links to the information you want.
If you believe you should be able to view this directory or page, please contact the Web site administrator by using the e-mail address or phone number listed on the Web site home page.
10061 - Connection refused
Internet Security and Acceleration Server
Technical Information (for support personnel)
Background:
The server you are attempting to access has refused the connection with the gateway. This usually results from trying to connect to a service that is inactive on the server.
ISA Server: csscisaser
Via:
Oracle is installed on my own computer.I think ISA should do nothing with it.And I have removed proxy setting in Internet exploer,but the error still happed.
I used netstat-a,and can find this:
proto :tcp
local address: myxxxxxx:8080
foreign address myxxxxxx:0
state : listening
does it mean my oracle http listener is started?

Open a command line and
- enter ping 127.0.0.1 ... should tell whether
connectivity is possible. If not, something is
blocking, and that something is usually a firewall.ping 127.0.0.1. I can connect to 127.0.0.1,very fast.but when I ping 127.0.0.1:8080 ,Can't get response.
enter ipconfig /all
enter and post output of lsnrctl status
There are so many output content.And you may see some #^$*#*&^$#@&* because I'm using Chinese version Oracle and OS.
IPconfig
Windows IP Configuration
        Host Name . . . . . . . . . . . . : cjis-e89f34e63f
        Primary Dns Suffix . . . . . . . :
        Node Type . . . . . . . . . . . . : Hybrid
        IP Routing Enabled. . . . . . . . : No
        WINS Proxy Enabled. . . . . . . . : No
        DNS Suffix Search List. . . . . . : xxxx.wan
Ethernet adapter 本地连接:
        Connection-specific DNS Suffix . : xxxx.wan
        Description . . . . . . . . . . . : Broadcom NetXtreme 57xx
roller
        Physical Address. . . . . . . . . : xx-13-72-7D-67-8B
        Dhcp Enabled. . . . . . . . . . . : Yes
        Autoconfiguration Enabled . . . . : Yes
        IP Address. . . . . . . . . . . . : 172.18.9.30
        Subnet Mask . . . . . . . . . . . : 255.255.255.0
        Default Gateway . . . . . . . . . : 172.18.9.252
        DHCP Server . . . . . . . . . . . : 172.18.18.9
        DNS Servers . . . . . . . . . . . : 172.18.18.9
        Primary WINS Server . . . . . . . : 172.18.18.9
        Lease Obtained. . . . . . . . . . : 2007年7月16日 15:51:15
        Lease Expires . . . . . . . . . . : 2007年7月24日 15:51:15
LSNRCTL status
正在连接到 (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
LISTENER 的 STATUS
别名                      LISTENER
版本                      TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Prod
ction
启动日期                  20-7月 -2007 11:19:13
正常运行时间              0 天 2 小时 17 分 10 秒
跟踪级别                  off
安全性                    ON: Local OS Authentication
SNMP                      OFF
默认服务           XE
监听程序参数文件          C:\oraclexe\app\oracle\product\10.2.0\server\network\
dmin\listener.ora
监听程序日志文件          C:\oraclexe\app\oracle\product\10.2.0\server\network\
og\listener.log
监听端点概要...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=cjis-e89f34e63f)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=8080))(Presentation
HTTP)(Session=RAW))
服务摘要..
服务 "CLRExtProc" 包含 1 个例程。
例程 "CLRExtProc", 状态 UNKNOWN, 包含此服务的 1 个处理程序...
服务 "PLSExtProc" 包含 1 个例程。
例程 "PLSExtProc", 状态 UNKNOWN, 包含此服务的 1 个处理程序...
服务 "XEXDB" 包含 1 个例程。
例程 "xe", 状态 READY, 包含此服务的 1 个处理程序...
服务 "XE_XPT" 包含 1 个例程。
例程 "xe", 状态 READY, 包含此服务的 1 个处理程序...
服务 "xe" 包含 1 个例程。
例程 "xe", 状态 READY, 包含此服务的 1 个处理程序...
['/pre']
Display contents of
C:\windows\system32\drivers\etc\hosts.['pre']
# Copyright (c) 1993-1999 Microsoft Corp.
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
# For example:
#      102.54.94.97     rhino.acme.com          # source server
#       38.25.63.10     x.acme.com              # x client host
127.0.0.1       localhostMessage was edited by:
sailfish83

Installing Oracle 10g Express Edition on x86_64

Hi,
I tried installing Oracle 10g express edition on Arch Linux X86_64 but could not get it running.
I followed guide here http://alodib.com/?q=node/32.
Installation went well. Then I configured it, apparently went well. But could not get it running.
I have following output
$>sudo /etc/rc.d/oracle-xe restart
:: Stopping Oracle Database [FAIL]
:: Starting Oracle Database [DONE]
$>sudo /etc/rc.d/oracle-xe restart
:: Stopping Oracle Database [FAIL]
:: Starting Oracle Database [DONE]
$>sudo /etc/rc.d/oracle-xe status
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 26-DEC-2011 12:58:24
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 26-DEC-2011 12:17:16
Uptime 0 days 0 hr. 41 min. 7 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin/listener.ora
Listener Log File /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC_FOR_XE)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost.localdomain)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
$> sqlplus
SQL*Plus: Release 10.2.0.1.0 - Production on Mon Dec 26 13:17:43 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter user-name: system
Enter password:
oracleXE: error while loading shared libraries: libaio.so.1: cannot open shared object file: No such file or directory
ERROR:
ORA-12547: TNS:lost contact

1) which Linux(freeware) flavor should I install ?Ordinarily, I'd recommend getting Oracle Linux (http://eDelivery.oracle.com/linux) because the default install includes all the prerequisite RPM packages you will need. And failing that, also offers another RPM package "oracle-validated" which will cause the installation of the necessary prerequisites.
But... you mentioned customer: if this is a revenue-producing situation and customer money is at stake, I strongly recommend they obtain commercial O/S support with either Oracle, Red Hat, or maybe SuSE/Novell. Compared to the cost of a downed business, an O/S support arrangement is cheap, cheap, cheap.
2) is there any virtual enviornment available for Linux Os on which I can install 10g Express Edition database ?Sure. You can run Oracle VirtualBox on most Linux, Windows, or Solaris boxes. http://VirtualBox.org for info.
3) If available, is there any difference in using the Linux Os in Virtual enviornment and actual installing Linux ? will there be any difference in installing database and configuration for both the cases?No real differences in either environment.
4) need download link for latest version of Red Hat Linux setupWhat, you didn't try http://eDelivery.oracle.com/linux yet?

Oracle 10g Express Edition and Forms 6i

Hi,
Need to know if Oracle 10g express edition supports forms 6i or not?
Please advise.
Thanks you very much.

Thanks for the answers.
Yes, XE universal does not work, but XE Western European does. I am having a hard time to configure Net8. The net configuration tools simply crash right away every time I try to run them. The sql*plus on form side crashes when I hit the connect button. The only thing that can run with no problem is form. I had to manually edit the tnsnames.ora file on form side, setting host=computer name and sid=XE. Tried many times until it worked.

Can not connect Oracle 10g express edition from report builder.

I have newly installed report builder . Different home was selected for Report builder and oracle. Oracle database server is also in the same machine. But i am not able to connect my oracle 10g express edition database. It throws error ORA-12154 : TNS could not resolve service name.( same error displayed while trying to connect from SQL Plus).But from toad i am able to access the database. May be because here I am able to select the proper home.
Here i am adding my tns entry
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 1ECA66A679AB494)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
can any one suggest what the actual problem is?
Thanks ..........

Hello,
Oracle 10g XE is rather specific and, I'm not sure that you can upgrade it to 10.2.0.4 .
However, Oracle published an Upgrade Guide for Oracle Express Edition but, it's limited to *10.2.0.3*:
http://download.oracle.com/docs/cd/B25329_01/doc/server.102/b32391/toc.htm
But be careful:
Once you have upgraded to Oracle Database 10g, you cannot downgrade back to Oracle Database Express Edition.Hope this help.
Best regards,
Jean-Valentin
Edited by: Lubiez Jean-Valentin on May 22, 2010 12:06 AM

How can i create a new database instance in oracle 10g express edition?

hello everybody
i'm a student
i am developing a database application
i'm using oracle 10g express edition
to run my application i need to create another database instance
but i didn't find any option for doing so in that product
if there is pls tell me where it is?
if not pls tell me how to manually create it?
regards,
Chaitanya

Chaitanya Babu M wrote:
yaa i'm sure about that .
i want one more instance of database.Can you perhaps explain why? I have a fair share of production and development servers - and not a single one of them needs to run more than one database instance.
So I'm interested in what requirement you are trying to satisfy by using two database instances on a single platform.
Oh yeah - if you want to create a custom XE instance (different SID, different tablespace sizes, more/less PL/SQL stuff installed, hack standard), make a copy of your XE db creation script (in your XE's +$ORACLE_HOME/bin+ and called createdb.sh ) and modify that for your needs.
PS. even with a different SID, only a single XE instance can be run at a time - you can however have 2 different ones defined and then use one at a time (e.g. testing international settings, init param differences, etc.)

Oracle 10g Express Edition

Hi All,
A newbie quesion. I have Oracle 8i in my laptop, I want to install Oracle 10g Express edition, can i have both together ?
Regards
Ravi Kumar

Yes, you can have as many Oracle homes as you require and as the host can hold, as long as you are careful and disciplined with the way you manage your ORACLE_HOME and PATH environment variables.
~ Madrid
http://hrivera99.blogspot.com

Installing and Running Oracle 10g Express Edition on Microsoft Vista

My computer is running on Microsoft Vista.
I downloaded Oracle 10g Express Edition for Vista.
I ran the setup.exe. Everything went well there.
But, when I open the SQLPlus program, a window prompts me to enter my username, password and host string.
Can someone please tell me what it is expecting for these fields? I am using the same username and password I used to create my Oracle account.
But what is the host string?
Appreciate it.
Thanks.

This may help
http://sites.google.com/site/delphibasics/home/delphibasicsarticles/installingoracledatabase10gexpresseditiononwindowsvista
Check out the section "Access demonstration data"
Also this is not the best place to post a question of this nature. This might be better :
Database Installation
Best Regards
mseberg

Downloading Oracle 10g Express Edition

Hello.
I'm trying to access the webpage from oracle 10g express edition but the site return me this page isn't available anymore, i need to download this specific version, how am i supposed to go along with that?
ps: if its not the right forum, please move it.

Hi
user599923, I recommend download Oracle Database Express Edition 11g Release 2.
Lik: http://www.oracle.com/technetwork/products/express-edition/downloads/index.html
TIPS
when you install the database to make sure the account that has administrator privileges install.
Why
Sometimes the installer glitches. Sometimes its because the user running the install isn't a local admin.
If there are no data files under the XE folder, that is a symptom of an installer glitch.
See the Local Users and Groups applet, Start/Run lusrmgr.msc open the Groups folder, right click/Properties on Administrators. If you're logged into the host with a domain account, be sure your <domain>\loginname is in that local admins group.

Newly installed oracle 10g express edition database

Hai to all
I have fedora 15 operating system with oracle 10g express edition database installed .. I already have working knowledge in mysql database .. my question is that when i opened oracle database via sql developer , then by expanding tables tab on left side .. I can able to see some table that are created by default as the following:
AQ$_INTERNET_AGENT_PRIVS
DEF$_AQCALL
LOGMNR_AGE_SPILLS$
My question is that . Can i drop all these tables ??? . By doing so, will that create any problems ..
Any idea will help me ..
thanks in advance to allllllll

If You wont to see how Oracle drop tables
- create Youre schema
create user test_user ... ;
-create table
create table test_user.test_table ... ;
drop table
table test_user.test_table ;
Regards,
Pavel
Edited by: Pavel on May 22, 2012 10:26 PM

Can not upgrade oracle 10g express edition 10.2.0.1 to 10.2.0.4

I have install oracle 10g express edition 10.2.0.1 for windows 2003
now I want upgrade to 10.2.0.4,I download p6810189(10.2.0.4 patch)
When I upgrade 10.2.0.4 at OUI,have 2 option I don't know how to fill
Specify File Locations
1.Name:
2.Patch:
my oracle was installed at c:\oraclexe
oracle Home:C:\oraclexe\app\oracle\product\10.2.0\server
oracle BASE:C:\oraclexe\
oracle home_name:XE
oracle sid:XE

Hello,
Oracle 10g XE is rather specific and, I'm not sure that you can upgrade it to 10.2.0.4 .
However, Oracle published an Upgrade Guide for Oracle Express Edition but, it's limited to *10.2.0.3*:
http://download.oracle.com/docs/cd/B25329_01/doc/server.102/b32391/toc.htm
But be careful:
Once you have upgraded to Oracle Database 10g, you cannot downgrade back to Oracle Database Express Edition.Hope this help.
Best regards,
Jean-Valentin
Edited by: Lubiez Jean-Valentin on May 22, 2010 12:06 AM

Oracle 10g Express Edition Host , Port, ServiceId(SID)

Similar Messages

Maybe you are looking for