Oracle 10g Express on Fedora 14 64-bit howto

I wanted to test Oracle 10g XE using VMware and Fedora 14 and found the installation instructions form Oracle somewhat outdated and confusing. http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25144/toc.htm. Here are my installation notes - perhaps someone will find them helpful.
h3. Installation of Fedora and Oracle 10g XE:
h4. 1) Install Fedora 14 Desktop 64-bit form the Live DVD using the defaults.
Note: To open a terminal window, select Terminal from Applications/System Tools menu.
h4. 2) Edit /etc/selinux/config to disable SELinux:
# su - root
# vi /etc/selinux/config
SELINUX=disabled
h4. 3) Install required software including 32-bit libraries:
$ su - root
# yum install install bc libc.so.6 libaio.so.1 gcc libaio compat-libstdc++-33
h4. 4) Download and install Oracle 10g XE:
http://technet.oracle.com
$ su - root
# cd /home/<your_usename>/Downloads
# yum install --nogpgcheck oracle-xe-univ-10.2.0.1-1.0.i386.rpm
h4. 5) Configure Oracle 10g XE:
# /etc/init.d/oracle-xe configure
h4. 6) Configure your regular fedora user account:
$ su - root
# /usr/sbin/groupadd -r dba
# usermod -G dba <your username>
# su - <your username>
$ echo "source /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/oracle_env.sh" >> $HOME/.bashrc
Logout for the change to take affect!
To access the Database Home Page go to "http://127.0.0.1:8080/apex
h3. Remote Access:
h4. 1) Enable remote ssh login:
$ su - root
# service sshd start
# chkconfig --level 345 sshd on
h4. 2) Configure Network Firewall from System/Administration menu:
Other Ports
Add
User defined
Do this for ports 8080 and 1521
Apply
h3. VMWare Tools installation:
+Note: configure your guest OS for Bridged Networking and fixed IP+
$ su - root
# yum install gcc make kernel-devel perl
At your VMware guest menu, select "install VMware Tools"
Right click on VMwareTools-xxx.tar.gz and extract it to the Desktop
Open a terminal window and type the following:
$ su - root
# cd /home/<your_username>/Desktop/vmware-tools-distrib
# ./vmware-install.pl
Continue to press Return and accept defaults.
# reboot
h3. Troubleshooting:
h4. ssh port 22: Connection refused
The Network Firewall is enabled by default, but port 22 is open.
You may try to simply disable/apply and enable/apply and try again - strange, but worked for me.
( +service iptables restart+ did not resolve this)
h4. Check if the ssh daemon is running:
# lsof -i tcp:22
h4. Use sqlplus to reset your passwords:
Make sure you properly configured your regular fedora user account as outlined above:
$ sqlplus / as sysdba
SQL> alter user sys identified by "password" account unlock;
SQL> alter user system identified by "password" account unlock;
h4. Start and stop Oracle XE:
# su - root
# /etc/init.d/oracle-xe start
# /etc/init.d/oracle-xe stop
h3. Related Links:
https://fedorahosted.org/spacewalk/wiki/OracleXeSetup

I got Oracle 11gR2 running on 64-bit Fedora 14 x86_64 - you do need a mix of x64_86 and i686 (32-bit) packages as given here:
http://download.oracle.com/docs/cd/B28359_01/install.111/b32285/toc.htm
These aren't exact matches on version numbers so when runInstaller doesn't pass validation, just check "Ignore". This will fail during linking, so follow along below and the rest will go smoothly:
installation error in invoking target 'agent nmhs'
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Hi.
So you want to build for fedora 13 without getting the error...
When you start to install with ./runInstaller, run in another terminal window (as root)
ls $ORACLE_HOME/sysman/lib/ins_emagent.mk
At first this will produce an error, as the installer wont have created this file yet.
Once the file exists, do:
vi $ORACLE_HOME/sysman/lib/ins_emagent.mk
Search for the line
$(MK_EMAGENT_NMECTL)
Change it to:
$(MK_EMAGENT_NMECTL) -lnnz11
If you do it within 30-40 seconds of the file appearing, you should not get any errors and the build will go fine. If you get an error, finish your edit then click on retry.
Hope that helps.
Gordon.
Edited by: [email protected] on 07-Jul-2010 06:54
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

Similar Messages

  • Oracle 10g Express on Fedora Core 6

    What a mess!!!! This thing does not want to work at all. Install (followed directions explicitly) seemed to go fine, but attempting to go to database home page just comes up with the firefox error page that site cannot be found. Tried to use SQL*Plus to create a tablespace, no go. Tried to create a user, no go. Opened all kinds of ports in my firewall (1521 for listener, 8085 for server) and my router for good measure. Nothing. Starting the listener seems to take forever, and it says it has started, but I don't think that is true. Trying to start or stop the database using the menu commands gives me a terminal window with the message "Operation failed, root is not a member of 'dba' group." I really need this to work so I can do some work from home. Anyone have any ideas?

    What is your 'SEL:inux' config? In general I've found that SELinux blocks most of the commands needed to set up Oracle XE so I simply turn it off.
    SQLPlus uses 1521 for the initial connect with the listener, but the followup connect with the server is on a random port. Selectively opening ports may not do much good.
    Oracle was blasted hard by the Unix community in the '90s for using root. "No self respecting *nix administrator would permit the use of root for anything other than system config." So Oracle went out of their way to make sure the only time root is needed - or permitted - is during install. In fact, a good install of Oracle in *nix will not permit root to run the database as it can be a serious security issue.  Instead, any user who is part of the ORADBA group (group dba by default) can do all admin.  The official Oracle owner, by default 'oracle' can, of course, do it all.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • Oracle 10g Express Edition / 64-bit client

    hi all,
    I have Oracle 10g express edition installed on a remote Vista/32-bit machine. I installed the XE Client on a Vista/64-bit and got the following error:
    UnsatistifiedLinkError: ocijdbc10.dll: Can't load IA 32-bit .dll on a AMD 64-bit platform.
    So, I tried installing the Instant Client (64-bit) and I'm getting a similiar error:
    UnsatistifiedLinkError: ocijdbc10.dll: Can't load IA 64-bit .dll on a AMD 64-bit platform.
    Using the XE Client, I'm able to login using sqlplus. Anyone have any ideas ??
    thanks jim
    Message was edited by:
    user584351

    Hi Jim, unless something has changed recently - the installation instructions for XE specifically state it is for a 32-bit windows operating system. Also, it does not mention using Vista. If you have access to the 10g Express forum they may have more information there for you.
    Michael W. Cunningham

  • Oracle 10g Express edition,can't visit database homepage

    I have installed Oracle 10g Express edition without error meggage, It seems goes well ,but when I want to visit my database_homepage on http://127.0.0.1:8080/apex, I see this:
    The page cannot be displayed
    There is a problem with the page you are trying to reach and it cannot be displayed.
    Please try the following:
    Click the Refresh button, or try again later.
    Open the Web site home page, and then look for links to the information you want.
    If you believe you should be able to view this directory or page, please contact the Web site administrator by using the e-mail address or phone number listed on the Web site home page.
    10061 - Connection refused
    Internet Security and Acceleration Server
    Technical Information (for support personnel)
    Background:
    The server you are attempting to access has refused the connection with the gateway. This usually results from trying to connect to a service that is inactive on the server.
    ISA Server: csscisaser
    Via:
    Oracle is installed on my own computer.I think ISA should do nothing with it.And I have removed proxy setting in Internet exploer,but the error still happed.
    I used netstat-a,and can find this:
    proto :tcp
    local address: myxxxxxx:8080
    foreign address myxxxxxx:0
    state : listening
    does it mean my oracle http listener is started?

    Open a command line and
    - enter ping 127.0.0.1 ... should tell whether
    connectivity is possible. If not, something is
    blocking, and that something is usually a firewall.ping 127.0.0.1. I can connect to 127.0.0.1,very fast.but when I ping 127.0.0.1:8080 ,Can't get response.
    enter ipconfig /all
    enter and post output of lsnrctl status
    There are so many output content.And you may see some #^$*#*&^$#@&* because I'm using Chinese version Oracle and OS.
    IPconfig
    Windows IP Configuration
            Host Name . . . . . . . . . . . . : cjis-e89f34e63f
            Primary Dns Suffix  . . . . . . . :
            Node Type . . . . . . . . . . . . : Hybrid
            IP Routing Enabled. . . . . . . . : No
            WINS Proxy Enabled. . . . . . . . : No
            DNS Suffix Search List. . . . . . : xxxx.wan
    Ethernet adapter 本地连接:
            Connection-specific DNS Suffix  . : xxxx.wan
            Description . . . . . . . . . . . : Broadcom NetXtreme 57xx
    roller
            Physical Address. . . . . . . . . : xx-13-72-7D-67-8B
            Dhcp Enabled. . . . . . . . . . . : Yes
            Autoconfiguration Enabled . . . . : Yes
            IP Address. . . . . . . . . . . . : 172.18.9.30
            Subnet Mask . . . . . . . . . . . : 255.255.255.0
            Default Gateway . . . . . . . . . : 172.18.9.252
            DHCP Server . . . . . . . . . . . : 172.18.18.9
            DNS Servers . . . . . . . . . . . : 172.18.18.9
            Primary WINS Server . . . . . . . : 172.18.18.9
            Lease Obtained. . . . . . . . . . : 2007年7月16日 15:51:15
            Lease Expires . . . . . . . . . . : 2007年7月24日 15:51:15
    LSNRCTL status
    正在连接到 (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
    LISTENER 的 STATUS
    别名                      LISTENER
    版本                      TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Prod
    ction
    启动日期                  20-7月 -2007 11:19:13
    正常运行时间              0 天 2 小时 17 分 10 秒
    跟踪级别                  off
    安全性                    ON: Local OS Authentication
    SNMP                      OFF
    默认服务           XE
    监听程序参数文件          C:\oraclexe\app\oracle\product\10.2.0\server\network\
    dmin\listener.ora
    监听程序日志文件          C:\oraclexe\app\oracle\product\10.2.0\server\network\
    og\listener.log
    监听端点概要...
      (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
      (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=cjis-e89f34e63f)(PORT=1521)))
      (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=8080))(Presentation
    HTTP)(Session=RAW))
    服务摘要..
    服务 "CLRExtProc" 包含 1 个例程。
      例程 "CLRExtProc", 状态 UNKNOWN, 包含此服务的 1 个处理程序...
    服务 "PLSExtProc" 包含 1 个例程。
      例程 "PLSExtProc", 状态 UNKNOWN, 包含此服务的 1 个处理程序...
    服务 "XEXDB" 包含 1 个例程。
      例程 "xe", 状态 READY, 包含此服务的 1 个处理程序...
    服务 "XE_XPT" 包含 1 个例程。
      例程 "xe", 状态 READY, 包含此服务的 1 个处理程序...
    服务 "xe" 包含 1 个例程。
      例程 "xe", 状态 READY, 包含此服务的 1 个处理程序...
    ['/pre']
    Display contents of
    C:\windows\system32\drivers\etc\hosts.['pre']
    # Copyright (c) 1993-1999 Microsoft Corp.
    # This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
    # This file contains the mappings of IP addresses to host names. Each
    # entry should be kept on an individual line. The IP address should
    # be placed in the first column followed by the corresponding host name.
    # The IP address and the host name should be separated by at least one
    # space.
    # Additionally, comments (such as these) may be inserted on individual
    # lines or following the machine name denoted by a '#' symbol.
    # For example:
    #      102.54.94.97     rhino.acme.com          # source server
    #       38.25.63.10     x.acme.com              # x client host
    127.0.0.1       localhostMessage was edited by:
    sailfish83

  • Oracle 10g Express Edition doesn't works on Win SBS 2011

    Deutsch
    Hallo zusammen!
    Ich ein kleines Problem mit der Installation von Oracle 10g Express Edition Release 10.2.0.1.0. Zuerst, ich muss die ältere Version nehmen, weil das Programm welches dann auf Oracle zugreift sehr „sensibel“ ist und wohlmöglich mit der neueren Version 11g nicht klar kommt.
    Die Version 10g habe ich nun auf einen Server mit Windows SBS 2011 Essentials SP1 64-Bit installiert. Doch leider bekomme ich nach der Installation keinen Zugriff zum Localhost 127.0.0.1:8080/apex. Weder mit IE noch mit Firefox.
    Meine Frage wäre funktioniert die Version 10g auf Windows SBS 2011 mit 64-bit überhaupt und falls ja, wo müsste man eventuell in Windows noch etwas einstellen damit man Zugriff auf 127.0.0.1:8080/apex hat?
    Vielen Dank vorab!
    English
    Hello at all!
    I’ve some problems with the installation of Oracle 10g Express Edition Release 10.2.0.1.0. At first i must take the old version of Oracle, because the program which needs Oracle ist very “sensitive” and i fear this program doesn’t cope with the new version.
    So i install the version 10g on a server with Windows SBS 2011 Essentials SP1 64-Bit. Unfortunately i don't get an access to the localhost 127.0.0.1:8080/apex. I try it with IE and Firefox.
    My question is does Oracle 10g works on Windows SBS 2011 64-bit and if yes, is there any setting to do on Windows to get the an access to 127.0.0.1:8080/apex?
    Thank!

    does Oracle 10g works on Windows SBS 2011 64-bitYou can see supported OSes in System Requirements for Windows platforms.
    As always, not certified does not necessarily mean it won't work, but if you have problems...

  • An issue while installing oracle 10g express edition on Ubuntu 10.04-64bit

    Hi,
    I'm running into an issue while installing oracle 10g express edition on my Ubuntu 10.04-64 bit installed machine using oracle-xe-universal_10.2.0.1-1.0_i386.deb package. The issue actually came up when I was trying to reinstall the package after uninstalling it due to some problem I had with my login credentials. To elaborate further on it, the /etc/init.d/oracle-xe script does not get created when I execute the debian package and thus i'm unable to configure the required credentials and stuff after the installation. I doubt whether this has something to do with the procedure I followed when uninstalling the previous package it. But what I did was just what's mentioned in the following [http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25144/toc.htm] user guide published by oracle.
    Another important clue would be, the platform of my machine is amd64bit although I'm dealing with an installation package preferred for i386. But I believe it's the only thing available in the oracle software download section. Hence I had to use the --force-architecture option to install it. But after reading some post published on this forum, I've figured out that it does not affect the usual execution of the software. Anyway,  I would greatly appreciate some help on this matter.
    [1] http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25144/toc.htm
    Thanks and Regards,
    Prabath Abeysekara
    Edited by: 829281 on Jan 18, 2011 7:52 PM

    Hi,
    Finally I've managed to find a solution for this issue. Thanks a lot for all the replies.
    Here's how I got rid of it.
    Addressing all the facts one by one,
    1.The problem of not getting the /etc/init.d/oracle-xe script generated was avoided
    by removing all the configuration files that were previously created while installing
    the product. The following command can be used to accomplish that task.
    *$ dpkg --purge oracle-xe*
    2.Next, Initially the password I used during the configuration process was "admin".
    Although I tried a couple of times installing the product providing the aforementioned
    password, the web UI kept prompting "Invalid Credentials" message not allowing me
    to login. But, this particular issue could be avoided by giving some other simple
    password.
    Finally, got it working and once again thanks a bunch for taking the burden of
    replying this thread.
    Cheers,
    Prabath

  • Installing Oracle 10G Express Edition on Linux after installing Libaio-0.3

    I had got a error while installing 10G Express Edition on Redhat Fedora core 4 linux after installing libaio-0.3.104-2.i386.rpm
    I had given the following command in Linux Command prompt to install the oracle database 10 G Express Edition (oracle-xe-10.2.0.1-1.0.i386.rpm)
    # sudo rpm -ivh /tmp/oracle-xe-10.2.0.1-1.0.i386.rpm
    The error I had got is as follows:
    Preparing.....#####################[100%]
    1:oracle-xe Warning:/etc/init.d/oracle-xe saved as /etc/init.d/oracle-xe.rpmorig
    error:Unpacking of archive failed on file /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/ons;4698950F:cpio:MD5 Sum Mismatch

    The steps I am asking is for installing oracle 10G express edition on Redhat Fedora core 4 Linux version. Now, after downloading the fresh copy of Oracle 10G express edition from the Oracle site. I have successfully installed oracle now.
    I was getting the following errors - I have pasted previous query for the problem which I had faced after installing Oracle 10 G Express Edition successfully on Redhat Fedora Core 4 Linux.
    The Previous Query is as follows:
    Thanks For Guiding Me All of you!
    Finally, I have installed Oracle 10G Express Edition on Redhat Fedora core 4 Linux.
    Now, I am having the following problems:
    After making the changes as per my Reference mentioned in my different messages, I had done the troubleshooting steps going to Options and setting the same.
    1.When I try to load the http://127.0.0.1:8080/apex page it gives an error popup:
    " The connection was refused when attempting to contact 127.0.0.1:8080 "
    2. After opening the Run the SQL Command Line by clicking on applications and When I say " Connect System and when prompted for password, I have entered the password and gives another error as follows:
    ORA-01034 : Oracle not available
    ORA-27101: Shared Memory realm does not exist
    Linux Error:2:No such file or directory
    3. When I try to manually start the Listener or Services, It gives one more error:
    Root Not a Member of DBA Group
    I need to What is happening or What is the Problem and How will I rectify them?

  • Dbms_fga.add_policy with Oracle 10g Express Edition

    begin
    dbms_fga.add_policy (
         object_schema=>'PROVA',
         object_name=>'EMPLOYEE',
         policy_name=>'ACCESS_EMPLOYEES',
         audit_column => 'name',
         ENABLE=> TRUE );
    end;
    Error
    feature not enabled: Fine-grained access control
    at "SYS.DBMS_FGA"
    i'am using Oracle 10g Express Edition i have this error about 5 days ..........please help me!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

    Thanks for your replay , in the follow the result about the query :
    SQL> select * from v$version;
    BANNER
    Oracle Database 10g Express Edition Release 10.2.0.1.0 - Product
    PL/SQL Release 10.2.0.1.0 - Production
    CORE 10.2.0.1.0 Production
    TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
    NLSRTL Version 10.2.0.1.0 - Production
    SQL> select * from v$option;
    VALUE
    Parallel load
    TRUE
    Point-in-time tablespace recovery
    FALSE
    Fine-grained access control
    FALSE
    Now i need fine-grained access control , what can I do ?
    I change the version or exist an other metod?
    thanks..........................

  • Newly installed oracle 10g express edition database

    Hai to all
    I have fedora 15 operating system with oracle 10g express edition database installed .. I already have working knowledge in mysql database .. my question is that when i opened oracle database via sql developer , then by expanding tables tab on left side .. I can able to see some table that are created by default as the following:
    AQ$_INTERNET_AGENT_PRIVS
    DEF$_AQCALL
    LOGMNR_AGE_SPILLS$
    My question is that . Can i drop all these tables ??? . By doing so, will that create any problems ..
    Any idea will help me ..
    thanks in advance to allllllll

    If You wont to see how Oracle drop tables
    - create Youre schema
    create user test_user ... ;
    -create table
    create table test_user.test_table ... ;
    drop table
    table test_user.test_table ;
    Regards,
    Pavel
    Edited by: Pavel on May 22, 2012 10:26 PM

  • Oracle 10g Express & VB6, replacing MSAccess, fingers crossed

    It looks like Oracle 10g express will provide the same DB Tables backend (functionality) I was getting from MSAccess. Connection strings look similar from what I see. Looks pretty straightforward.
    Is the Oracle Client app needed for use with a multi-user VB6 app? Or can the usual connect syntax be used from within the VB6 client app?
    Edited by: 837993 on Feb 18, 2011 7:55 AM

    Depends, on what you're wanting to accomplish, and where.
    When the XE instance is set up, every server install includes an oracle client. Getting it to work with the odbc admin applet is usually straightforward, unless you're on a 64-bit OS then it can get a bit tricky.
    The other machines that connect to the instance may need an oracle client, or for some things the "Microsoft ODBC Driver for Oracle" can work- depends on the complexity of the SQL and the amount/type of work the remote clients/programs do with the database. Testing (*lots* of testing) is the key there ;)
    The important bits for connecting to an oracle database are 1) where it "lives" (host) 2) how to get to it (port) and 3) what service or ORACLE_SID do you want to connect to. If the host uses dhcp, that's not really an optimal choice, unless you have a dynamic DNS that updates for the host when it has a new IP. But that's another topic ... ;)
    The 11g instant client can make client setups somewhat simpler by using assumptions for the port and default service when not specified, and can also take out some of the confusion with 32 vs. 64 bit clients. But the need for all three of those pieces of information for a connection don't change. Not really.

  • How can i create a new database instance in oracle 10g express edition?

    hello everybody
    i'm a student
    i am developing a database application
    i'm using oracle 10g express edition
    to run my application i need to create another database instance
    but i didn't find any option for doing so in that product
    if there is pls tell me where it is?
    if not pls tell me how to manually create it?
    regards,
    Chaitanya

    Chaitanya Babu M wrote:
    yaa i'm sure about that .
    i want one more instance of database.Can you perhaps explain why? I have a fair share of production and development servers - and not a single one of them needs to run more than one database instance.
    So I'm interested in what requirement you are trying to satisfy by using two database instances on a single platform.
    Oh yeah - if you want to create a custom XE instance (different SID, different tablespace sizes, more/less PL/SQL stuff installed, hack standard), make a copy of your XE db creation script (in your XE's +$ORACLE_HOME/bin+ and called createdb.sh ) and modify that for your needs.
    PS. even with a different SID, only a single XE instance can be run at a time - you can however have 2 different ones defined and then use one at a time (e.g. testing international settings, init param differences, etc.)

  • Create a New DB in Oracle 10g Express

    Dear experts
    I have downloaded and installed oracle 10g express on windows 2000 Professional System.
    Now i would like to create a database called AcmeInc and in that database object i want to create tables and relationship. Can anyone please tell how i can do this from HTML interface? or through SQL command. Please help i am new to Oracle and have used MS SQL Server
    Thanks
    Manish Sawjiani

    Check these two links for some facts about Oracle 10g XE :
    http://www.oracle.com/technology/products/database/xe/pdf/dbxe_faq.pdf
    http://www.oracle.com/technology/products/database/oracle10g/pdf/twp_general_10gdb_product_family.pdf
    And this is the Tutorial :
    http://st-curriculum.oracle.com/tutorial/DBXETutorial/index.htm

  • Can't uninstall or reinstall oracle 10g express edition in w/server 2003

    Hi,
    I need help from all of you, i already install oracle 10g express edition in
    windows server 2003 in D drive. but i can't remove because the oracle not in
    the add remove program so i download the windows install clean up to remove
    but after remove it still in the all program i still can start and stop the
    database but can't go to the database home page.The error message (the install
    cannot proceed as service OracleServiceXE is present on the system. Remove the
    service , reboot the systemand retry the installation) can any one guide me to use
    command prompt to remove.
    My email address [email protected]
    Thanks

    Hi,
    Perform the following steps, this will solve your problem and can go with new installation. :-)
    (Only perform the steps 7.2 section and here is the link : http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25143/toc.htm#BABDJDCD
    Manually Removing Oracle Database XE
    If the deinstallation is interrupted, follow these steps to manually remove Oracle Database XE from your computer:
    Step 1: Stop the Oracle Database XE Services
    Step 2: Remove the Oracle Database XE Registry Editor Settings
    Step 3: Update the System Variable Path
    Step 4: Remove Oracle Database XE from the Start Menu and Desktop
    Step 5: Remove the Oracle Database XE Directories
    Step 6: Install and Run the Windows Installer CleanUp Utility
    7.2.1 Step 1: Stop the Oracle Database XE Services
    Follow these steps:
    1. Open the Windows Services utility: From the Start menu, select All Programs, then Administrative Tools, and then Services.
    2. If any of the following Oracle services exist and have the status Started, then select each of the services, and click Stop:
    OracleXE
    OracleXETNSListener
    OracleJobSchedulerXE
    OracleXEClrAgent
    OracleMTSRecoveryService
    3.
    Exit Services.
    See also the Microsoft online help for more information on stopping services.
    7.2.2 Step 2: Remove the Oracle Database XE Registry Editor Settings
    Follow these steps:
    1.
    Log on to Windows with Windows administrative privileges.
    2.
    Ensure that you followed the instructions under "Step 1: Stop the Oracle Database XE Services" to stop the Oracle Database XE services.
    3.
    Start the Registry Editor at a command prompt:
    SYSTEM_DRIVE:\> regedit
    4.
    Go to HKEY_CLASSES_ROOT.
    5.
    Delete the following keys:
    NEED TO CONFIRM THE XE-SPECIFIC ONES.
    6.
    Go to HKEY_CURRENT_USER\Software.
    7.
    Under Microsoft\Windows\CurrentVersion\Explorer\MenuOrder\Start Menu\Programs, delete the Oracle Database 10g Express Edition key.
    8.
    Go to HKEY_LOCAL_MACHINE\SOFTWARE and search for the ORACLE group key.
    9.
    Expand the ORACLE group key and then delete the KEY_XE and OracleMTSRecoveryService keys.
    10.
    Go to HKEY_LOCAL_MACHINE\SOFTWARE\ODBC\ODBCINST.INI.
    11.
    Expand the ODBCINST.INI key and remove the Oracle in XE key.
    12.
    Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services.
    13.
    Delete the following keys:
    OracleServiceXE
    OracleXEClrAgent
    OracleXETNSListener
    14.
    Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Eventlog\Application.
    15.
    Delete the Oracle.xe key.
    16.
    Exit the Registry Editor.
    17.
    Restart your computer.
    Thanks,
    Rams...
    Edited by: user10888288 on May 3, 2010 5:58 AM

  • Can't uninstall or reinstall oracle 10g express edition in windows server 2

    Hi,
    I need help from all of you, i already install oracle 10g express edition in windows server 2003 in D drive. but i can't remove because the oracle not in the add remove program so i download the windows install clean up to remove
    but after remove it still in the all program i still can start and stop the database but can't go to the database home page. can any one guide me to use command prompt to remove.
    Thanks

    Hi,
    I need help from all of you, i already install oracle 10g express edition in windows server 2003 in D drive. but i can't remove because the oracle not in the add remove program so i download the windows install clean up to remove
    but after remove it still in the all program i still can start and stop the database but can't go to the database home page. can any one guide me to use command prompt to remove.
    Thanks

  • Oracle gateway for Oracle 10g DB on Windows 64 bit server

    Is there any place that I can find Oracle dateway for Oracle 10g DB on Windows 64 bit server? I can only find Gateway for Oracle 11g on Windows 32 bit server. Please help me to identify this. Thanks.

    yingkuan:
    Thanks a lot. The link tells the details. It seems that Oracle has not release Gateway for Oracle database 10.2.0.x on Windows 64 bit server. Probably they don't do it.
    So under this circumstance, if I want to install Gateway (32 bit) on Oracle 10.2.0.3 DB on Windows 64 bit server for Teradata, I probably have to install Gateway software in another Oracle Home, then configure it right. Please give more advice on this. 32 bit Gateway will work for 64 bit database?

Maybe you are looking for

  • Tables created in Enterprise Manager dont show up in SQLPLUS

    I am struggling with Enterprise console manager and command line SQLPLUS. I have tried scott/tiger , system/manager and the new user that I have created. But I am having the following problems: 1. I cannot connect as NORMAL through Enterprise Console

  • Instant client appalling info

    I am trying to get a linux web server to connect to an oracle database. I have to say that the information relating to the instant client is very dissappointing. It has now taken me 2 days to get this far, the initial build of the server was only 2 h

  • HT1848 Where do i get the download to back up my phone

    I need some help

  • InDesign CS4 Mac upgrade (CS5 won't work)

    Does anyone know how or where I can get an upgrade license for Mac InDesign CS4 (from CS3)? I have the CS4 trial version installed, but when I click to purchase a license, it goes to CS5 page. I have a Macintosh G5 which is not supported by CS5. I co

  • Elements 10 recompose problem

    Hi I have an Elements 10 recompose problem. I unlock the background layer, choose the recompose tool, mark the elements I want removed red, but when I squeeze the picture together, the red marks immediately disappear and those formerly marked red ele