Oracle 10g Express (XE) Tools

I have been looking site that list’s and describes some of the tools available for Oracle 10g Express (XE) but have not found anything like that. I was also hoping it might provide a brief summary of what they do. Sorry I am new to oracle.

I have been looking site that list’s and describes some of the tools available for Oracle 10g Express (XE) What URL?
Tools to do what?

Similar Messages

Can't uninstall or reinstall oracle 10g express edition in w/server 2003

Hi,
I need help from all of you, i already install oracle 10g express edition in
windows server 2003 in D drive. but i can't remove because the oracle not in
the add remove program so i download the windows install clean up to remove
but after remove it still in the all program i still can start and stop the
database but can't go to the database home page.The error message (the install
cannot proceed as service OracleServiceXE is present on the system. Remove the
service , reboot the systemand retry the installation) can any one guide me to use
command prompt to remove.
My email address [email protected]
Thanks

Hi,
Perform the following steps, this will solve your problem and can go with new installation. :-)
(Only perform the steps 7.2 section and here is the link : http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25143/toc.htm#BABDJDCD
Manually Removing Oracle Database XE
If the deinstallation is interrupted, follow these steps to manually remove Oracle Database XE from your computer:
Step 1: Stop the Oracle Database XE Services
Step 2: Remove the Oracle Database XE Registry Editor Settings
Step 3: Update the System Variable Path
Step 4: Remove Oracle Database XE from the Start Menu and Desktop
Step 5: Remove the Oracle Database XE Directories
Step 6: Install and Run the Windows Installer CleanUp Utility
7.2.1 Step 1: Stop the Oracle Database XE Services
Follow these steps:
1. Open the Windows Services utility: From the Start menu, select All Programs, then Administrative Tools, and then Services.
2. If any of the following Oracle services exist and have the status Started, then select each of the services, and click Stop:
OracleXE
OracleXETNSListener
OracleJobSchedulerXE
OracleXEClrAgent
OracleMTSRecoveryService
3.
Exit Services.
See also the Microsoft online help for more information on stopping services.
7.2.2 Step 2: Remove the Oracle Database XE Registry Editor Settings
Follow these steps:
1.
Log on to Windows with Windows administrative privileges.
2.
Ensure that you followed the instructions under "Step 1: Stop the Oracle Database XE Services" to stop the Oracle Database XE services.
3.
Start the Registry Editor at a command prompt:
SYSTEM_DRIVE:\> regedit
4.
Go to HKEY_CLASSES_ROOT.
5.
Delete the following keys:
NEED TO CONFIRM THE XE-SPECIFIC ONES.
6.
Go to HKEY_CURRENT_USER\Software.
7.
Under Microsoft\Windows\CurrentVersion\Explorer\MenuOrder\Start Menu\Programs, delete the Oracle Database 10g Express Edition key.
8.
Go to HKEY_LOCAL_MACHINE\SOFTWARE and search for the ORACLE group key.
9.
Expand the ORACLE group key and then delete the KEY_XE and OracleMTSRecoveryService keys.
10.
Go to HKEY_LOCAL_MACHINE\SOFTWARE\ODBC\ODBCINST.INI.
11.
Expand the ODBCINST.INI key and remove the Oracle in XE key.
12.
Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services.
13.
Delete the following keys:
OracleServiceXE
OracleXEClrAgent
OracleXETNSListener
14.
Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Eventlog\Application.
15.
Delete the Oracle.xe key.
16.
Exit the Registry Editor.
17.
Restart your computer.
Thanks,
Rams...
Edited by: user10888288 on May 3, 2010 5:58 AM

Uploading photo in oracle 10g express edition

Hi,
I want to upload photo in my database running on oracle 10g express edition.This process must handle simultaneous uploading and with minimum error. Problem is the site is online and anyone can upload garbage,etc.so i am planning to collect images through email and then photo would be uploaded by some data entry operator. please suggest me some process
Thanks

878927 wrote:
How can use these loader tools? and what will be the advantage by going through these tools?please explain.Another Condition is i have to scan the photos before uploading it to databaseThere are instructions on how to use SQL*LOADER in the on-line documentation. I meant to say that you have to decide the best way to load the data. I just listed some examples on possible ways it can be done.
Apex is a database application that can be used to generate web pages based on database tables. It can also load files from clients. You can read about Apex in the Apex forums here on OTN or in the on-linedocumentation

Oracle 10g Express Edition and Forms 6i

Hi,
Need to know if Oracle 10g express edition supports forms 6i or not?
Please advise.
Thanks you very much.

Thanks for the answers.
Yes, XE universal does not work, but XE Western European does. I am having a hard time to configure Net8. The net configuration tools simply crash right away every time I try to run them. The sql*plus on form side crashes when I hit the connect button. The only thing that can run with no problem is form. I had to manually edit the tnsnames.ora file on form side, setting host=computer name and sid=XE. Tried many times until it worked.

Oracle Database 10g or Oracle 10g Express Edition

Hi Friends,
I have worked on Oracle 9i but now I would like to work on Oracle 10g but confuse because there are more option for download.Which one should I go for?
Oracle Database 10g or Oracle 10g Express Edition ?
Or Any other option.
Any Suggestion are welcome.
KarTiK.

It all depends on what exactly you are planning to use oracle for. Depending on the version, there may be found or not some features, you can see it this way:
EE > SE > XE
EE is a superset of SE and SE is a superset of XE. So you will find several limitation on the XE edition.
However, even though XE is a very limited version, it cannot be underestimated, it can be used for Spatial Data projects, it works with spatial data locator, and there are several guides that show how to use it with PHP so you can start a web site. WebPLSQL is included with it, so the only limit is your creativity.
This version can be very useful, and you can make the most of it, you may be interested in reading this article Oracle Database 10g Express Edition: Not Just for Learners
by Lewis Cunningham.
The XE edition is free. So you can use it without license fees and is the best suitable tool for learning, it is easy to install and setup. You can have a fully functional XE database out of the box. Once you feel more comfortable with oracle technology you can start thinking about taking the next step to a SE or EE edition.
~ Madrid

Backing up all data and objects of Oracle 10g Express Edition...

Hi,
I have tables, packages, views, procedures, etc. in Oracle 10g Express Edition, running on Windows XP. I would like to create a backup of the complete database (objects, relationships, all data, etc) into a file that I can restore in case the database crashes.
What do I do?
Thanks.

markk2 wrote:
I am actually using it for Production. Yes, I would need objects and data.I would suggest to look at the Standard Edition as well if you are using it for production.
Is there a way to backup everything without data and then backup everything with data? Also, is there a way to restore everything without data and then restore everything with data?What's the meaning of "backup everything withiut data" and "then backup everything with data" ? The data is in the tables alone. The rest of the objects are not containing data but are using it, be it views, procedures etc. There is no such restore like without data. Without data, all what you would be getting would be structures of the tables which is going to be of no use. The export/import tool, is a simple tool which can put the tables (and other objects as well) along with their data in your dumpfile . In the situation of loss of a table, you can do an import from that dump file and you can restore the table back(with or without data, depends on the choice of yours while running Import command) . But this is just going to be a logical recovery of the object(s). For a complete database, it's better to use RMAN which would copy the datafiles and keep it with itself. Later, when you have a crash, you can restore those files to get teh database recovered. But if you want complete security, its better to put your db in the archive log and then do the backup along with the archive log files.
HTH
Aman....
How to do this exactly? Thanks!

Can not reset password in Oracle 10g Express

I have searched google for 4 hours, now I am certain:
"May be I am the only one in the world who have this problem."
I installed Oracle 10g Express on my Debian5.
I need to reset password for SYS/SYSTEM users
So I checked online tutorial says I need to use a utility called "orapwd" to recreate a password file.
Everything is smooth since now.
When I finally find this "orapwd" utility. I type "orapwd" as a root user. Terminal replies "orapwd command not found".
I then discovered the orapwd is some kind of x-execute file. After an extensive search on google I concluded that this kind of file is inexecutable.
Many tutorials I read online specify that the "orapwd" is actually "orapwd.exe", but on my Debian system it is "orapwd" with no extension.
Any suggestion is welcome.
ps: is there anyway I can reset password without going through "orapwd" s*t.
Best regards to all who have read to the end of this post

Eric wrote:
And Billy, what makes you think Windows Administrators do not know administration on command line?Experience dealing with Windows SAs over a decade and a half.
I got my first part time job as a Windows Administrator in the beginning era of Windows 95 in a small netcafe. The boss does not pay me but like me use workstations there for free.
In the early days, I administrate both Dos and Win3.1. I do my work on command line primarily and wrote a hell lot of *.bat files. In those days it were quite different. Because administration and configuration came from a command line DOS environment. We for example never configured networking for a Windows 3.1 or WFW 3.11 client via a GUI. It was done by directly editing system.ini and protocol.ini and making the correct changes.
And this made the guys and me almost fail our Windows CE certification because the silly multiple question exam asked which buttons to click in the GUI to configure networking and not how it works at actual system configuration level. In other words, it tested your knowledge of the GUI functions and not the actual system config and admin itself.
And then Windows NT was released and command line admin became the exception and not the rule. The All-Config-Eggs-in-a-Single-basket called the Windows Registry exemplified this flawed approach.
But since Window95 I find myself spending less and less time on command line, more and more on GUI and my work efficiency increase tremedously. I can record the mouse clicks, the key presses, then covert then into a script. I can change every setting of the system in just few clicks. In the world of Linux, this is still a dream, isn't it?You are missing the point. There are a large number of admin GUI tools available for Linux. But these seldom serve as crutches to configure the system, because of a i-am-clueless-factor.
If two systems, both are equally capable. To acheive the same thing, system A takes 2 working hours, system B takes 8 working hours. Doesn't this makes system B inferior compare to A?Because of the lack of knowledge and skill of a person to do the required on system B in 10 minutes now takes 8 hours instead? Ignorance of an operating system does not qualify as making system B inferior to system A.
In past decade, Linux became very popular in the server market is not becasue there are an increasing number of Linux system administrators who are good at command line administration but because Linux is becoming more user friendly. And as a result. This increased administrator's work efficiency and the same time reduce training cost which invites more people to learn Linux.Incorrect. There is a reason that 483 of the 500 of the fastest and most powerful computer systems on this planet runs Linux. And only 5 runs Windows.
And this has nothing to do with imagined user friendliness. It has everything to do with technical superiority and total cost of ownership.
So the more idiot proof the system is, the better the system will become.No. The less idiots there are, the better the quality of system administration, the better security, the more robust the systems are.

Migration from DB2 to Oracle 10g using free tools

Dear all,
Im currently using DB2 database and wish to migrate data over to Oracle 10g express. However, i could not find any free tools or methods to migrate without using tools as i could not use tools like Oracle Migration Workbench as the migration is for certain project which will deal with internal process or commercial purpose.
Would like to seek everybody's help. Greatly appreciation your response.
Regards,
Kee Cheng =)

nvr4getu wrote:
Thanks. But have you heard of creating a heterogenous services, create a database link between the 2 database, then transform over to Oracle?I thought you were looking for a free tool. With HS, you'll have to buy the component to install on the DB2 system. Unless something has changed since the last time I worked in a mixed Oracle/DB2 shop.

Unable to connect Oracle 10g Express from Visual Studio Server Explorer

Hello,
Please help me out here. I am connecting from Visual Studio 2008 to Oracle 10g Express Edition and the I have installed the ODAC 11 and the ODP.NET as well for Visual Studio(Both include Oracle Developer tools). But whenever I tried to connect from my Visual Studio 2008 server explorer so that I can have the database and its object there, I do get this error : "ORA-12560 : TNS: protocol adapter error."
The following is what I specified in my connection box:
DataSource Name: (Local Database)
Username : HR
Password: the password for it.
My OS is : Windows Vista Ultimate.
Please anyone who has solved such error should just help out here.
Thanks all

Thank you for your reply. I will like to know if you can use Visual Studio. In visual studio there is what we called Server Explorer and from there you can create connection and access all the database server from there. I am able to connect to the Oracle XE through the browser and I was able to crete table and other stuffs like that but when I tried to connect from Visual Studio 2008, I get the 12560 Error. I checked my TNSNAMES and found this:
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = OLAMMIE)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
Look at what I have in my Sqlnet.Ora file,
# This file is actually generated by netca. But if customers choose to
# install "Software Only", this file wont exist and without the native
# authentication, they will not be able to connect to the database on NT.
SQLNET.AUTHENTICATION_SERVICES = (NTS)
Please kindly help me out of this as it is very urgent. I can connect from browser using http://127.0.0.1:8080/apex but cannot connect from my C# code and Server Explorer. What is likely to cause this error.
Thank you for helping me in advance.

Attaching DBF / ORA files to Oracle 10g express

Hi,
I have Oracle 10g Express and I want to attach/restore database. I`m begginer in oracle so I know little about process of restoring/attaching databases. I have only DBF/ORA files, is it possible to restore them and how?
Any help appreciated.
Thanks,
Ivan.
Message was edited by:
Vertygo

Probably not... Oracle does not generally allow you to take data files from one machine and mount them on another machine.
If you have a small dump file (generally .DMP) and a handful of data files, you might have some transportable tablespaces, but it doesn't sound like that is the case.
If you have control files, you might have a closed database backup. If that were the case, you could do a database restore, but you would only be able to use the express edition if that was the original database version you took the backup from. It doesn't sound like you have control files, though, so I don't expect that you could do a recovery.
If the original database is still around, the easiest option would probably be to do an export from that system and an import into your new database (using the exp/imp or expdp/impdp tools depending on the source Oracle version).
Justin

Is there a better interface available for Oracle 10g Express?

Dear Experts
I just installed Oracle 10g Express for a trial to develop and Accounting ERP. Until now i have been using MS SQL Server 7.0 & 2000 on VB but now we are considering JAVA and want to get the feel of Oracle. My questions are as follows:
1. Is there a better inteface available other than the Internet Explorer?
2. Would a better interface be avaliable in other version of Oracle 10g?
3. Does Oracle have interface to create relationships graphically?
4. Is there documentation available for 10g in one bundle like the Sybase Adaptive server anywhere or MS Books online?
5. This is really an excellent forum and i have seen some of the answers and they are great.
Thanks a lot i hope i will be successfully be able to develop an application using Java (desktop version using swing)and Oracle 10g
Regards
Manish Sawjiani

Standman--
If you want a somewhat more powerful tool (albeit more complicated) check out TOra:
http://sourceforge.net/projects/tora/
As an Oracle DBA I've used this at client's sites when I can't pay for PL/SQL Developer to be installed, and it has quite a few useful things built into it. I think that it's going to see a boom in popularity now that Oracle came out with XE.
~Jer

How can i create a new database instance in oracle 10g express edition?

hello everybody
i'm a student
i am developing a database application
i'm using oracle 10g express edition
to run my application i need to create another database instance
but i didn't find any option for doing so in that product
if there is pls tell me where it is?
if not pls tell me how to manually create it?
regards,
Chaitanya

Chaitanya Babu M wrote:
yaa i'm sure about that .
i want one more instance of database.Can you perhaps explain why? I have a fair share of production and development servers - and not a single one of them needs to run more than one database instance.
So I'm interested in what requirement you are trying to satisfy by using two database instances on a single platform.
Oh yeah - if you want to create a custom XE instance (different SID, different tablespace sizes, more/less PL/SQL stuff installed, hack standard), make a copy of your XE db creation script (in your XE's +$ORACLE_HOME/bin+ and called createdb.sh ) and modify that for your needs.
PS. even with a different SID, only a single XE instance can be run at a time - you can however have 2 different ones defined and then use one at a time (e.g. testing international settings, init param differences, etc.)

Create a New DB in Oracle 10g Express

Dear experts
I have downloaded and installed oracle 10g express on windows 2000 Professional System.
Now i would like to create a database called AcmeInc and in that database object i want to create tables and relationship. Can anyone please tell how i can do this from HTML interface? or through SQL command. Please help i am new to Oracle and have used MS SQL Server
Thanks
Manish Sawjiani

Check these two links for some facts about Oracle 10g XE :
http://www.oracle.com/technology/products/database/xe/pdf/dbxe_faq.pdf
http://www.oracle.com/technology/products/database/oracle10g/pdf/twp_general_10gdb_product_family.pdf
And this is the Tutorial :
http://st-curriculum.oracle.com/tutorial/DBXETutorial/index.htm

Can't uninstall or reinstall oracle 10g express edition in windows server 2

Hi,
I need help from all of you, i already install oracle 10g express edition in windows server 2003 in D drive. but i can't remove because the oracle not in the add remove program so i download the windows install clean up to remove
but after remove it still in the all program i still can start and stop the database but can't go to the database home page. can any one guide me to use command prompt to remove.
Thanks

Hi,
I need help from all of you, i already install oracle 10g express edition in windows server 2003 in D drive. but i can't remove because the oracle not in the add remove program so i download the windows install clean up to remove
but after remove it still in the all program i still can start and stop the database but can't go to the database home page. can any one guide me to use command prompt to remove.
Thanks

What Are the Tables in new oracle 10g express

Hi guys,
I am new at oracle and I just installed the Oracle 10g express. after login to the oracle by SQL Developer I noticed there are lots of tables in table folder which some of them come with $ and some not! can you please let me know what are these tables for? are they like system tables in SQL Server? if so then what are the tables under
-->Other Users/System/Tables?
I am lost here and I can't figure out what are the Other Users? are they like databases? I tries to google them but I couldn't find any thing
Thanks a lot

http://download.oracle.com/docs/cd/E11882_01/server.112/e16508/toc.htm
http://download.oracle.com/docs/cd/E11882_01/server.112/e17110/toc.htm
SELECT USERNAME FROM ALL_USERS;
USER/SCHEMA are to Oracle; what database is to SQL_Server
Edited by: sb92075 on Apr 22, 2011 5:53 PM

Oracle 10g Express (XE) Tools

Similar Messages

Maybe you are looking for