Oracle 10g grid
Can I use Oracle 10.2.0.2 version database as a repository database for Oracle 10g grid? Does it support that version?
No you cannot use a 10.2 database.
How about actually reading the release notes/documentation? Its clearly stated in there
Bazza
Similar Messages
-
How to setup Oracle 10g grid on a node other than SERVER
Hi,
We are in a process of moving the database residing on Windows servers to IBM AIX5L servers. For this purpose I came up with an idea of installing database on AIX and operate it remotely on Windows platform using 10g Grid Control and 10g Client. For this to happen perfectly, I am in middle of implementing same concept on Windows platfrom. I have made a test database on a Windows based server and I am trying to connect it with another Window based node. I know hwo to connect it using a client software but I am more interested to do it on Grid Control.
At this stage, I have created database on server and have also configured Oracle Management Agent along with Oracle 10g Grid Control. I read oracle documentation that it is necessary to install Oracle Management Agent on server machine in order to let other nodes get connected with the server.
I would extremely appreciate anyone who could help me in setting up 10g grid control on another node. Please note I wish to operate the database using grid control remotely. For know you can consider both computers on same network, I will go on VPN once I am able to do it on local network.
Looking forward for your reply
ShezHi Xaheer,
Thanks for looking into this matter. I had agent and grid running on the server and I have almost installed 10g Grid control 10.2.0.2. The place where I am stuck now is the OMS Configuration script that run after the installation in Configuration Assistant window. It just stuck here for some minutes and then displays the error. Let me paste here the lines in that appears in the detail panel of installation wizard.
Output generated from configuration assistant "OMS Configuration"
Command = oracle.sysman.emcp.oms.OmsPlugIn -configureOms
Operation Stopping OPMN Processes is in progress.
Operation EM Deploying is in progress.
Operation Creating OMS Respository is in progress.
Configuration assistant "OMS Configuration" failed
The "d:\OracleHomes\agent10g\cfgtoollogs\configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------
According to the oracle installation guide, I had to deconfigure the database before running the setup. I did it using this command,
emca -deconfig dbcontrol db -repos drop
AS far as i think, I am getting this error becouse of sysman schema which was droped during the installation and was recreated( as I read in the oracle installation guide ) is not found by the script. So in order to b ring back sysman schema, I recreated the repository using following commands.
emca -deconfig dbcontrol db -repos drop
emca -config dbcontrol db -repos create
Now, the database on server is not starting up. I can just see RED downword error, u know what i mean right ? Everyting is down, Database instance, Listener and Agent Connection to Instance, and on the top pf page I can see " Enterprise Manager is not able to connect to the database instance. The state of the components are listed below."
When I try to startup the database using the grid control it gives me this error.
Couldnot contact the agent. Verify that the url for the agent is null.
I am stuck in here. If you know how to fix this agent , i would really appreciate that.
Thanks -
Error while installing Oracle 10G Grid control in RHEL
I was installing Oracle 10G Grid control in RHEL. Got the following error. Any idea what this means and what is the remedy?
=======================================
Output generated from configuration assistant "Oracle Net Configuration Assistant":
/home/oracle/jre/1.1.8/bin/../bin/i686/native_threads/jre: relocation error: /home/oracle/jre/1.1.8/bin/../lib/i686/native_threads/libjava.so: symbol __libc_wait, version GLIBC_2.0 not defined in file libc.so.6 with link time reference
Configuration assistant "Oracle Net Configuration Assistant" failed
=======================================
regards,
AnjanI saw this once but I forgot how I solved it. I believe that I made a softlink to the libc.so.6 from another libc. Have a look on Metalink, becauses I've got the idea for my solution there.
cu
Andreas -
Error while installing oracle 10g grid on windows
hi all,
when i am installing oracle 10g grid i got the error that
"Configuration assistant "OMS Configuration" failed "
when i saw the log
it has been mentioned the failed to create repos user.
this is the out put of the log
[14-02-2008 11:51:55] Enter SYS user's password :
[14-02-2008 11:51:55]
[14-02-2008 11:51:55] Enter repository user password :
[14-02-2008 11:51:55]
[14-02-2008 11:51:55] Enter MetaLink user password :
[14-02-2008 11:51:55]
[14-02-2008 11:51:55] Getting temporary tablespace from database...
[14-02-2008 11:51:55] Found temporary tablespace: TEMP
[14-02-2008 11:51:55] Checking SYS Credentials ...
[14-02-2008 11:51:56] OK.
[14-02-2008 11:51:56] Checking DB Init Parameters ...
[14-02-2008 11:51:56] OK.
[14-02-2008 11:51:56] Checking for Repos User ...
[14-02-2008 11:51:56] Does not Exist.
[14-02-2008 11:51:56] Loading necessary DB objects ...
[14-02-2008 11:51:56] Checking DB Object (DBMS_SHARED_POOL , PACKAGE) ...
[14-02-2008 11:51:56] Done Loading necessary DB objects
[14-02-2008 11:51:56] Creating repos user ...
DECLARE
ERROR at line 1:
ORA-01119: error in creating database file
'E:\oraclegrid\oms10g\oradata\mgmt.dbf'
ORA-27040: file create error, unable to create file
OSD-04002: unable to open file
O/S-Error: (OS 3) The system cannot find the path specified.
ORA-06512: at line 44
[14-02-2008 11:51:57] Failed.
[14-02-2008 11:51:57] Repository Creation failed. Failed to create Repos User.
all users and everyone has full permission on this folder, i don't know why it is giving,
please any one help me out i am stuck in the middle of the installation
oracle 10g grid version is 10.1
please reply to this
Regards,
Veeresh Sthis is the output what i get in oui:configuration assistants
Output generated from configuration assistant "OMS Configuration" (attempt 6):
Command = oracle.sysman.emcp.oms.OmsPlugIn -configureOms
Operation Stopping OPMN Processes is in progress.
Operation EM Deploying is in progress.
Operation Creating OMS Respository is in progress.
Configuration assistant "OMS Configuration" failed
The "E:\oraclegrid\agent10g\cfgtoollogs\configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-------------------------------------------------------------------------------
when i saw this E:\oraclegrid\agent10g\cfgtoollogs\configToolFailedCommands file
the below 2 lines was mentioned in that file.
rem Copyright (c) 1999, 2006, Oracle. All rights reserved.
oracle.sysman.emcp.agent.AgentPlugIn
this below log i got in E:\oraclegrid\agent10g\cfgtoollogs\cfgfw\CfmLogger_2008-02-14_10-28-34-AM.log file
i have pasted last lines of the files.
INFO: oracle.sysman.top.oms:OmsPlugIn:Requested Configuration Step 0 have been completed with status=true
INFO: oracle.sysman.top.oms:deployOms:Already deployed, skipped.
INFO: oracle.sysman.top.oms:OmsPlugIn:Requested Configuration Step 1 have been completed with status=true
INFO: oracle.sysman.top.oms:OmsPlugIn:Requested Configuration Step 2 have been completed with status=true
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Performing Command=E:\oraclegrid\oms10g\sysman\admin\emdrep\bin\RepManager.bat -connect (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=A1MD04823)(PORT=1521)))(CONNECT_DATA=(SID=q))) -action drop -repos_user SYSMAN -output_file E:\oraclegrid\oms10g\sysman\log\emca_repos_drop12_19_36.log
INFO: oracle.sysman.top.oms:PerformSecureCommand:drain:Spaced passwords by=100 ms
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:E:\oraclegrid\oms10g\sysman\admin\emdrep\bin\RepManager.bat -connect (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=A1MD04823)(PORT=1521)))(CONNECT_DATA=(SID=q))) -action drop -repos_user SYSMAN -output_file E:\oraclegrid\oms10g\sysman\log\emca_repos_drop12_19_36.log have completed with exitCode=0
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stdout:
'Enter SYS user's password :
Getting temporary tablespace from database...
Found temporary tablespace: TEMP
Checking SYS Credentials ... OK.
Dropping the repository..
Quiescing DB ... Done.
Checking for Repos User ... Does not Exist.
Repos User does not exist ... Continuing with cleanup ...
Dropping Roles/Synonymns/Tablespaces ... Done.
Unquiescing DB ... Done.
Dropped Repository Successfully.
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stderr:
''stty' is not recognized as an internal or external command,
operable program or batch file.
'stty' is not recognized as an internal or external command,
operable program or batch file.
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Performing Command=E:\oraclegrid\oms10g\sysman\admin\emdrep\bin\RepManager.bat -connect (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=A1MD04823)(PORT=1521)))(CONNECT_DATA=(SID=q))) -action create -repos_user SYSMAN -metalink_username NOTAVAILABLE_ -output_file E:\oraclegrid\oms10g\sysman\log\emca_repos_create12_19_38.log -ecm_datafile E:\oraclegrid\oms10g\oradata\mgmt_ecm_depot1.dbf -datafile E:\oraclegrid\oms10g\oradata\mgmt.dbf
INFO: oracle.sysman.top.oms:PerformSecureCommand:drain:Spaced passwords by=200 ms
INFO: oracle.sysman.top.oms:RepManager Create Repository Error = E:\oraclegrid\oms10g\sysman\admin\emdrep\bin\RepManager.bat -connect (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=A1MD04823)(PORT=1521)))(CONNECT_DATA=(SID=q))) -action create -repos_user SYSMAN -metalink_username NOTAVAILABLE_ -output_file E:\oraclegrid\oms10g\sysman\log\emca_repos_create12_19_38.log -ecm_datafile E:\oraclegrid\oms10g\oradata\mgmt_ecm_depot1.dbf -datafile E:\oraclegrid\oms10g\oradata\mgmt.dbf . Please check the log file at 12
'Enter SYS user's password :
Enter repository user password :
Enter MetaLink user password :
Getting temporary tablespace from database...
Found temporary tablespace: TEMP
Checking SYS Credentials ... OK.
Checking DB Init Parameters ... OK.
Checking for Repos User ... Does not Exist.
Loading necessary DB objects ...
Checking DB Object (DBMS_SHARED_POOL , PACKAGE) ... Exists.
DBMS POOL package exists.
Done Loading necessary DB objects
Creating repos user ... Failed.
Repository Creation failed. Failed to create Repos User.
''stty' is not recognized as an internal or external command,
operable program or batch file.
'stty' is not recognized as an internal or external command,
operable program or batch file.
'stty' is not recognized as an internal or external command,
operable program or batch file.
'stty' is not recognized as an internal or external command,
operable program or batch file.
'stty' is not recognized as an internal or external command,
operable program or batch file.
'stty' is not recognized as an internal or external command,
operable program or batch file.
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:E:\oraclegrid\oms10g\sysman\admin\emdrep\bin\RepManager.bat -connect (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=A1MD04823)(PORT=1521)))(CONNECT_DATA=(SID=q))) -action create -repos_user SYSMAN -metalink_username NOTAVAILABLE_ -output_file E:\oraclegrid\oms10g\sysman\log\emca_repos_create12_19_38.log -ecm_datafile E:\oraclegrid\oms10g\oradata\mgmt_ecm_depot1.dbf -datafile E:\oraclegrid\oms10g\oradata\mgmt.dbf have completed with exitCode=12
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stdout:
'Enter SYS user's password :
Enter repository user password :
Enter MetaLink user password :
Getting temporary tablespace from database...
Found temporary tablespace: TEMP
Checking SYS Credentials ... OK.
Checking DB Init Parameters ... OK.
Checking for Repos User ... Does not Exist.
Loading necessary DB objects ...
Checking DB Object (DBMS_SHARED_POOL , PACKAGE) ... Exists.
DBMS POOL package exists.
Done Loading necessary DB objects
Creating repos user ... Failed.
Repository Creation failed. Failed to create Repos User.
INFO: oracle.sysman.top.oms:PerformSecureCommand:runCmd:Command Output stderr:
''stty' is not recognized as an internal or external command,
operable program or batch file.
'stty' is not recognized as an internal or external command,
operable program or batch file.
'stty' is not recognized as an internal or external command,
operable program or batch file.
'stty' is not recognized as an internal or external command,
operable program or batch file.
'stty' is not recognized as an internal or external command,
operable program or batch file.
'stty' is not recognized as an internal or external command,
operable program or batch file.
INFO: oracle.sysman.top.oms:RepManager Create Repository Error = 12. Please check the log file at E:\oraclegrid\oms10g\sysman\log\emca_repos_create12_19_38.log
WARNING: oracle.sysman.top.oms:EmcpPlug:startProcessing:Exception in runner=RepManager Create Repository Error = 12. Please check the log file at E:\oraclegrid\oms10g\sysman\log\emca_repos_create12_19_38.log
INFO: oracle.sysman.top.oms:EmcpPlug:invoke:Completed EmcpPlug invoke method on an aggregate=oracle.sysman.top.oms for Action=configuration in step=2:microstep=0
INFO: oracle.sysman.top.oms:Internal PlugIn for {Micro Step state:step:2:configuration in CfmAggregateInstance: oracle.sysman.top.oms:10.2.0.2.0:common:family=CFM:oh=E:\oraclegrid\oms10g:label=7} failed with an unhandled exception:
java.lang.Exception: RepManager Create Repository Error = 12. Please check the log file at E:\oraclegrid\oms10g\sysman\log\emca_repos_create12_19_38.log
at oracle.sysman.emcp.util.EmcpPlug.startProcessing(EmcpPlug.java:389)
at oracle.sysman.emcp.util.EmcpPlug.invoke(EmcpPlug.java:360)
at oracle.sysman.emCfg.core.PerformMicroStep.runJavaClass(PerformMicroStep.java:509)
at oracle.sysman.emCfg.core.PerformMicroStep.executeMicroStep(PerformMicroStep.java:121)
at oracle.sysman.emCfg.core.ActionPerformer.performMicroStep(ActionPerformer.java:917)
at oracle.sysman.emCfg.core.ActionPerformer$Performer.run(ActionPerformer.java:1038)
INFO: oracle.sysman.top.oms:The plug-in OMS Configuration has failed its perform method
INFO: OuiConfigVariables:IAction.perform() was called on {Action state:OUICA in CfmAggregateInstance: OuiConfigVariables:1.0.0.0.0:common:family=CFM:oh=E:\oraclegrid\oms10g:label=7}
INFO: Framework waiting for Action to complete at 12:19:41.469
INFO: CfwProgressMonitor:actionProgress:About to perform Action=OUICA Status=is running with ActionStep=0 stepIndex=0 microStep=0
INFO: OuiConfigVariables:About to execute plug-in OUI_CA
INFO: OuiConfigVariables:The plug-in OUI_CA is running
INFO: OuiConfigVariables:Launching CmdExec
INFO: OuiConfigVariables:ExitCode=0
INFO: OuiConfigVariables:The plug-in OUI_CA executed as attached=true in separate process with exitcode=0
INFO: OuiConfigVariables:The plug-in OUI_CA has successfully been performed
INFO: done waiting for Action from 12:19:41.469
INFO: Cfm.save() was called
INFO: Cfm.save(): 15 aggregate instances saved
please anyone help, i have given all details, i want to install this grid as soon as possible -
Can I run 32 bit version of Oracle 10g grid on Linux x86-64?
Since Oracle did not release 64 bit version of Oracle 10g grid for Linux X86-64. Can I run 32 bit version of Oracle 10g grid on Linux x86-64? If so did anyone tried this? and also any known issues?
All I had to do was use the 32bit version of "/usr/bin/gcc" and "/usr/bin/g++" to run the installation
That is:
bin]# cp -p /usr/bin/gcc /usr/bin/gcc_old
bin]# mv /usr/bin/gcc /usr/bin/gcc323
mv: overwrite `/usr/bin/gcc323'? y
bin]# ln -s /usr/bin/gcc296 /usr/bin/gcc
bin]# cp -p /usr/bin/g++ /usr/bin/g++_old
bin]# mv /usr/bin/g++ /usr/bin/g++323
mv: overwrite `/usr/bin/g++323'? y
bin]# ln -s /usr/bin/g++296 /usr/bin/g++
AFTER INSTALLATION REMEMBER TO
move back the 64bit files to their former state.
bin]#rm /usr/bin/g++
bin]#rm /usr/bin/gcc
bin]#mv /usr/bin/gcc_old /usr/bin/gcc
bin]#mv /usr/bin/g++_old /usr/bin/g++ -
Downloading oracle 10g grid for solaris
hi guys..
Been trying to install oracle 10g grid for sun sparc solaris machines. Didnt first downloaded the complete files at http://www.oracle.com/technology/software/products/oem/htdocs/solsoft.html , while using the gunzip command to decompress it, it gave me errors!
Then did downloaded the individuals files and while uncompressing it this time using unzip command, I had errors again. just wanted to ask if some one had this kinda errors.
Thanks.
DIDJust ensure you transfer (FTP) the file to Solaris from your Windows as Binary.
-
ORACLE 10G: Grid or not?
The following is an excerpt from Ian Foster's article on What is a Grid?.
<....coordinates resources that are not subject to centralized control
(A Grid integrates and coordinates resources and users that live
within different control domainsfor example, the users desktop
vs. central computing; different administrative units of the same
company; or different companies; and addresses the issues of
security, policy, payment, membership, and so forth that arise in
these settings. Otherwise, we are dealing with a local management
system.)>
My main point of confusion is that going from ORACLE 10G's capabilities, especially with new features like the 10G Database ASM, Streams, Transportable Tablespaces, 10G Application Server APM, Workload Management and all of 10G Enterprise Manager Grid Control array of features, systems built on this infrastructure cant be referred to as a grid, atleast from the foregoing excerpt.
Please can someone put me right, assuming i am going wrong. I am researching into grid technology and where Oracle technology fits.
Thank you.Hi,
you shouldn't confuse - Oracle Grid is just hype
but seriously this one is enterprise grid computing or
computing on demand or utility computing.
It's different from academic (classics) grid.
Main goal of enterprise grid - reduce TCO of datacenters.
It's based on usual "idiots" report of Gather (or may
be IDS) that server's CPUs are too underload (idle).
So you should dynamically distribute workload between
few servers in RAC cluster (now named as Grid).
And of course, it will be work automagically
so bosses can fire all datacenter's personnel
and manage just push one red button.
SL -
Having Trouble detecting targets in Oracle 10G Grid
I am unable to detect target servers in the oracle 10G Console, not sure what I have missed. I have not been able to locate any direct info on this.
Automatic Discovery
The first time the Management Agent is started, "most" supported targets that are located on the same host machine as the Management Agent are automatically discovered and default monitoring levels and data collections are automatically enabled.
You may need to manually discover some targets, such as Oracle Collaboration Suite targets, Web applications, clusters, and Beacons.
The Grid Control Enterprise Manager Web Application is discovered automatically. -
Oracle 10g Grid Control Installation On RedHat Advanced Server 3.0
I am planing to install Enterprise Manager 10g Grid Control Release 1 (v10.1.0.3)
on RedHat Advanced Server 3.0. The agent I am trying to download is showing version 10.1.0.4.1. I am not sure iof this agent is going to work with (v10.1.0.3). Pl. let me know if someone has performed this installation. Do I need to apply any patch on OEM and agent.
Thanks
RajActually, entirely the other way around, unless you like seeing errors in your OMS.
OMS must be at at least the same patch level as the communicating agents.
10.1.0.3 agent against a 10.1.0.4 OMS = OK
10.1.0.4 agent against a 10.1.0.3 OMS = Bad mojo
Download the 10.1.0.4.1 patchset from Metalink and update your OMS, or stick with the 10.1.0.3 agent if you've no access to metalink. -
Installing Oracle 10g Grid Control on Winxp
Hi All,
I am facing a problem while installing Grid controls on Winxp. The installation completes everytime but it just hangs when configuring componenet Java Security.
Do you have any idea how can I get rid of this. I tried running using configtools from command prompt but it seems the same problem, it hangs...I am trying first time on Windows system but its never install....
Thanks
Namit SehgalDon't you get some details on the screen as to what exactly is being run? If not check the logs and post the error here.
-
Does Oracle 10g Grid Control Create a New Instance?
i just installed it for the first time and noticed that it created what was apparently a new instance of oracle with its own bin, etc. directories. is this what is supposed to happen?
thanks!i just installed it for the first time and noticed
that it created what was apparently a new instance of
oracle with its own bin, etc. directories. is this
what is supposed to happen?
thanks!It is clearly stated in the Installation Guide that came with the CD or your download. It is important to read it before you start installation. -
Hi,
I logged into the Grid as SYSMAN and added 2 targets(A and B). I created 2 jobs related to target A and 2 jobs related to target B.
1. Where can I find the details of these 4 jobs? i.e., which system tables have these information like job name, execution date, error details if any. I appreciate your help.
2. is there any issue related to job status in grid? always it is showing succeeded even if the attached procedure has the divided by zero error. Is there any workaround for this?
Thanks, Jay.The following query might help:
jobs output run within last 24 hours:
SELECT job_name,
start_time,
end_time,
target_name,
target_type,
STATUS,
OUTPUT
FROM mgmt$job_step_history
WHERE to_date(start_time) BETWEEN to_date(sysdate -1)
AND to_date(sysdate)
order by 1
Datatype of field output is clob and therefore difficult to display. You can use Toad to run this query which shows output in a popup window, just double click in the output column and it would display the popup. -
Regarding Oracle 10g Grid Control Enterprise Manager
Hi Friends,
the file at http://www.oracle.com/technology/software/products/oem/htdocs/winsoft10g.html
Named B30800-01.zip is having a problem.
As I had downloaded the file with the (download manager and Directly also), but after downloading file size is been matching and there was no error with the download of the file.
Downloaded File Size = 1729778063 Jul 13 07:44 b30800_0.zip
But at the time of getting extract the file has been given many errors.
Can anyone tell me what should I do?
As I had tried to send a mail with extraction report to Oracle Corporation email id but I got a failure Delivery.
Can anyone give me the email id of oracle corporation where I can get some help from Oracle Corporation.
Thanks in Advance
Regards,
Bhavik FuletraHi,
Dear lavaprasadkafle,
Size and size on disk usually differs
The Size is the real size of the file,
The file system stores data in clusters of certain size (Usually 4k bytes in NTFS, 8k or 16k in FAT32), so if you have a file with size 250 bytes on NTFS 4k, Size on disk will be 4 k (4096 bytes), with FAT32 at cluster size 16, the size on disk will be 16384 bytes!
For the file you mentioned, I guess that it is stored on FAT32 partition with 16k cluster size, just calculate it as previously done, you will find where 11889 bytes came from.
On the other hand, to make sure that the zip file is downloaded correctly, just open and test it with any archive tool that have test. or you can use MD5 or any other hashing check.
Regards -
10g grid agent installation and configuration on oracle RAC
Hi All,
I have one two node RAC setup on HP-UX itanium platform and I want to install oracle 10g grid agent on both the RAC nodes to monitor the RAC instances and databases and OMS repository server is ready and running. Only I have installed agents on both the nodes, but tns entry and hosts files on OMS server and both the nodes modified.
But, nodes are not getting automatically discovered by OMS server. And what is the command to configure the grid agent on RAC instances.
I have to install grid agent on both the nodes individually or it can be installed on single node and can be integrated with other node.
Please help me out in this regard.......
Thanks in Advance,
Sukanta Paul.
Edited by: sukanta paul on Aug 18, 2009 10:16 PMSimilar problem and installation does not detect the rac nodes and installation is done locally which does not help the situation..By the way we all consult documentation and the whole point of having a forum is so we have a potential fix or work around and not link from here to documentation. Just to mention :)
-
Oracle 10g Agent is not working in Windows VISTA
Hi
I have installed Oracle 10g Grid Control in VISTA. But the Agent is not getting started.
the trc in the Agent10 G log directory is
2008-04-19 17:29:45 Thread-532 WARN http: snmehl_connect: connect failed to (HP-PC:3872): No connection could be made because the target machine actively refused it.
(error = 10061)
2008-04-19 17:29:45 Thread-532 ERROR main: nmectla_agentctl: Error connecting to https://HP-PC:3872/emd/main/. Returning status code 1
2008-04-19 18:18:22 Thread-5288 WARN http: snmehl_connect: connect failed to (HP-PC:3872): No connection could be made because the target machine actively refused it.
(error = 10061)
2008-04-19 18:18:22 Thread-5288 ERROR main: nmectla_agentctl: Error connecting to https://HP-PC:3872/emd/main/. Returning status code 1
2008-04-19 18:18:23 Thread-7652 ERROR main: nmectl.c: nmectl_validateTZRegion, agentTZoffset =330,and testTZoffset for GMT:0 do not match
2008-04-19 18:18:24 Thread-7652 ERROR main: nmectl.c: nmectl_validateTZRegion, agentTZoffset =330,and testTZoffset for GMT:0 do not match
2008-04-19 18:18:26 Thread-7272 WARN http: snmehl_connect: connect failed to (HP-PC:3872): No connection could be made because the target machine actively refused it.
(error = 10061)
2008-04-19 18:18:26 Thread-7272 ERROR main: nmectla_agentctl: Error connecting to https://HP-PC:3872/emd/main/. Returning status code 1
2008-04-19 18:20:52 Thread-4872 WARN http: snmehl_connect: connect failed to (HP-PC:3872): No connection could be made because the target machine actively refused it.
(error = 10061)
2008-04-19 18:20:52 Thread-4872 ERROR main: nmectla_agentctl: Error connecting to https://HP-PC:3872/emd/main/. Returning status code 1
2008-04-19 18:20:53 Thread-4344 ERROR main: nmectl.c: nmectl_validateTZRegion, agentTZoffset =330,and testTZoffset for GMT:0 do not match
2008-04-19 18:20:54 Thread-4344 ERROR main: nmectl.c: nmectl_validateTZRegion, agentTZoffset =330,and testTZoffset for GMT:0 do not match
2008-04-19 18:20:55 Thread-5604 WARN http: snmehl_connect: connect failed to (HP-PC:3872): No connection could be made because the target machine actively refused it.
(error = 10061)
2008-04-19 18:20:55 Thread-5604 ERROR main: nmectla_agentctl: Error connecting to https://HP-PC:3872/emd/main/. Returning status code 1This pretty much says it all:
No connection could be made because the target machine actively refused it.What version of Vista?
What version of the agent? ... 10g is not a version number it is a marketing label
Did you check to see if the agent is compatible with your operating system?
My recommendation would be to get a real operating system: Either Oracle Linux or XP.
Maybe you are looking for
-
Start up problems after sleep mode
Hi, Half of the time when I put my mid 2010 MacBook Pro in sleep mode by closing the screen it won't restart once I open the screen back again (the screen remains black). This hasn't happened that many times before, but now its becoming more frequent
-
MD01- PR not getting generated
Hi, When i am running MRP in MD01,it is showing me : No materials were planned Statistics Materials planned Materials with new exceptions Materials with terminated MRP list Parameters Scope of Planning Plnt
-
Manage DPM servers, running DPM jobs, etc from SCOM 2012 SP1
Hi, Little background about our systems. We have a dedicated SCOM 2012. We have 22 DPM servers, DPM 2010 and DPM 2012 (we are upgrading to 2012 SP1, we have customers that still using Windows 2003 servers) to be managed by SCOM We have a few DPM serv
-
Human Task Display Form problem
Hi, I am deploying a new BPEL Process using a simple Human Task activity. for the display i choosed XSL format. this is the centent of my coordinatorApproval_Display.tform file : <?xml version = '1.0' encoding = 'UTF-8'?> <taskDisplay targetNamespace
-
Hi all, I have few queries regarding spool in slap. I will be glad if some one can help me. 1. In SP01 what is the difference between print directly & print with changed parameters. 2. If a spool request is in waiting status for a long time, what doe