Oracle 10G in Linux server Hardware requirement
Hi,
I need to know the Hardware requirement of Linux dedicated server which oracle 10g have to instal. I need the best configuration including RAM memory. Very Urgent. Can u pls help me.
Regards,
Rajesh
800643 wrote:
I need to know the Hardware requirement of Linux dedicated server which oracle 10g have to instal. I need the best configuration including RAM memory. The answer is: A banana.
The reason is: Because a motorcycle has no doors.
And this is as a valid answer as any other to your question. You can run Oracle 10g XE on a notebook. You can run Oracle 10g Enterprise on a 64 CPU HP Superdome. You can run Oracle 10g RAC on a 60 blade servers, each with 8 dual-core CPUs and 64GB RAM.
So what is the best configuration? That depends entirely on WHAT you are planning to do using the Oracle RDBMS product. And it should be a concern that your approach is thinking that Oracle RDBMS is like Microsoft Excel and you can quickly and easily determine am optimal h/w and RAM config for it. Oracle RDBMS is not a desktop product like Excel. You do not fit h/w to it. You fit h/w to your requirements - as you would fit your choice of Oracle products to use to your requirements.
Very Urgent.We do not do "+Very Urgent+" here. This is a volunteer forum - where paid professionals are providing free opinion, advice and recommendations. That is without any warranty and guarantee. In a forum that does not provide SLAs or escalation procedures.
You want "+urgent+" support? Then pay for it and use http://support.oracle.com
Similar Messages
-
Installing Oracle 10g on Linux Server 5
Dear experts,
I am getting the following message when I tried to run the runInstaller on Linux Server 5 for Oracle 10g R2.
checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLiunx-1.0, asianux-1 or asianux-2
Failied <<<<
does Oracle 10g R2 not support installation over Linux Server 5 or what could be the possible reason for failure...plz explainyea I have installed xorg packages
here is the error message that is given:
Exception java.lang.UnsatisfiedLinkError: /tmp/OraInstall2008-01-07_04-37-54AM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory occurred..
java.lang.UnsatisfiedLinkError: /tmp/OraInstall2008-01-07_04-37-54AM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(Unknown Source)
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at sun.security.action.LoadLibraryAction.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
at sun.awt.DebugHelper.<clinit>(Unknown Source)
at java.awt.Component.<clinit>(Unknown Source)
at oracle.sysman.oii.oiif.oiifm.OiifmGraphicInterfaceManager.<init>(OiifmGraphicInterfaceManager.java:222)
at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.createInterfaceManager(OiicSessionInterfaceManager.java:193)
at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.getInterfaceManager(OiicSessionInterfaceManager.java:202)
at oracle.sysman.oii.oiic.OiicInstaller.getInterfaceManager(OiicInstaller.java:436)
at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:926)
at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:866)
Exception in thread "main" java.lang.NoClassDefFoundError
at oracle.sysman.oii.oiif.oiifm.OiifmGraphicInterfaceManager.<init>(OiifmGraphicInterfaceManager.java:222)
at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.createInterfaceManager(OiicSessionInterfaceManager.java:193)
at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.getInterfaceManager(OiicSessionInterfaceManager.java:202)
at oracle.sysman.oii.oiif.oiifm.OiifmAlert.<clinit>(OiifmAlert.java:151)
at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:984)
at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:866)
now tell me what to do...plz -
Conncet oracle client on Windows XP/7 to oracle 10g RetHot Linux server
I have installed oracle 10g on Rethot Linux and oracle client 10g installed on windows 7 .how to connect oracle server from oracle client in different OS. Please give me step .
Please Help Me..
I have installed Oracle 11g server Release 2 on Oracle Enterprise Linux Release 5 Update 5 using VMWare and oracle 11g client R2 installed in windows 7 (host).My question is how to connect Oracle Server from Oracle Client? -
Applying security patch to Oracle 10G on Linux
Hello,
I'm new to Oracle DBA world, need to apply security patch to Oracle 10G on Linux server, any tips and notes would be appreciated.
thanks
SamManish,
1. I have to upgrade the database version from 10.2.0.2 to 10.2.0.4 on Linux, Is there any proper documentation which will help me out?Please refer to the following document.
Note: 454750.1 - Oracle Apps Release 12 with Oracle Database 10.2.0 interoperability notes
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=454750.1
2. What are the types of oracle database patches? what is the proper procedure to apply those kind of patches to Oracle 10g on Linux?
Most of the patches in this upgrade are database patches (which should be applied using opatch). The main upgrade patch (Patch 6810189 - 10.2.0.4 patch set) should be applied using Oracle Universal Installer (runInstaller).
Always follow the steps in the patch README file before applying any patch.
Regards,
Hussein -
Oracle 10g to sql server 2005 - how to setup
Hi,
I have been searching on how to setup a connection from oracle 10g to sql server 2005 and i have to admit i am struggling a bit.
I have read about Heterogeneous Services and Database Gateway but we really dont want to fork for licence fees so it looks like i have to investigate HS.
My environment is:
10gR2 Linux 32 bit
SQL Server 2005 32bit.
Would someone be able to provide me with a list of steps to help me get this setup?
Thanks.
BHi,
If you don't want to pay for any licence fees then you will have to use the 11g Database Gateway for ODBC (DG4ODBC) which is included in your RDBMS license.
You need to use the 11g versions because all previous gateway versions have been desupported for some time. The latest version is 11.2.0.3 which can be downloaded from My Oracle Support as -
Patch 10404530: 11.2.0.3.0 PATCH SET FOR ORACLE DATABASE SERVER
and download -
p10404530_112030_platform_5of7.zip
- this is the Gateway media pack and has everything needed for a standalone gateway install.
This version is certified the following RDBMS versions - 10.1.0.5 + RDBMS patch 5965763, 10.2.0.3 + RDBMS patch 5965763, 10.2.0.4, 10.2.0.5, all 11.1 versions, all 11.2 versions.
You have 2 choices about where you can install it and it would be better to install the gateway into a new and separate ORACLE_HOME from any existing Oracle installs -
1. On the Linux 32-bit platform where the RDBMS is running. If you install it here you will need to supply a third party ODBC driver. The only free one I am aware of is from FreeTDS but there may be others. There can be problems with the FreeTDS so another one may be preferable but these usually require a license fee.
See this note in My Oracle Support -
How to Configure DG4ODBC on Linux x86 32bit or on HP-UX RISC (DG4ODBC 11.1 only) to Connect to Non-Oracle Databases post install (Doc ID 466228.1)
2. Install DG4ODBC on the Windows platform where SQL*Server is running. If you install on Windows then you will be able to use the Microsoft SQL*Server ODBC driver which should already be installed. See this note on My Oracle Support -
How to Setup DG4ODBC (Oracle Database Gateway for ODBC) on Windows 32bit (Doc ID 466225.1)
If you don't have access to My Oracle Support you will need to contact someone in your organisation to access the notes for you or review the gateway documentation -
http://www.oracle.com/pls/db112/homepage
Regards,
Mike -
Replication of table from Oracle 10g to sql server 2000
Could i replicate table from Oracle 10g to sql server online. we have tables with same configuration and if any change happen in oracle 10g or sql server in that table we need to replicate that change to other database.
What is the solution for this two way replication between sql server and Oracle 10gBut the tutorial is saying that i will have to install Oracle database on the server already having sql server, is it client or whole database, if it is then it will acquire lot of resource.
I want to find out that for Heterogenous Service ODBC, we need third party software for ODBC Driver of SQL SERVER for Linux and secondly if we use Transparent Gateway then what are the steps for its configuration.
I could not find steps of configuration of Transoparent gateway, when i am trying to install Transparent gateway from Universal installer, it is not there. where do i find it , Do i need to purchase it too. -
Could Oracle 10g (in a server) work with existing Oracle 9i client
Hello!
I am new in Oracle, and I was wondering if it’s possible to use Oracle 10g in a server with clients using Oracle 9i. Would that work? Are they compatible?.
Thanks!my 9.2 client can not connect to 10g server,
It says that "this application requires that you have been granted to select any dictionary privelege".
my 10 g client connecting normally, but i have many terminal computers with 9 client.
Tell me how to connect to 10g server from 9 client please. -
Problem to install oracle 10g on linux
Hi,
I want to install Oracle 10g on Linux
(I have Linux X76CLLCFAUU 2.6.18-194.17.1.el5 #1 SMP Mon Sep 20 07:12:06 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux)
, when i run ./runInstaller, i have the following error , do you known what is the problem :
Démarrage d'Oracle Universal Installer...
Vérification des exigences du programme d'installation...
Vérification de la version du système d'exploitation : il doit s'agir deredhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Echec <<<<
Fermeture d'Oracle Universal Installer ; le journal de cette session figure à l'emplacement /tmp/OraInstall2010-11-17_05-03-15PM/installActions2010-11-17_05-03-15PM.logHello,
Vérification de la version du système d'exploitation : il doit s'agir deredhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Echec <<<<So, when the Installer checked the OS Release, it didn't find the correct one.
The message said that you should have one of this OS:
Redhat-3, SuSE-9, Redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2As previously posted, you should check from the Installation Guide that you have the right OS requirements before running the Installer.
Hope this help.
Best regards,
Jean-Valentin -
How to reconfigure Oracle-xe (Oracle 10g for linux)?
Hello!
I found this article (seems useful since I use Mandriva 2010.2):
[http://www.e-angel.net/index.php?tg=articles&idx=Print&topics=195&article=912|http://www.e-angel.net/index.php?tg=articles&idx=Print&topics=195&article=912]
I installed Oracle 10g from the file "oracle-xe-univ-10.2.0.1-1.0.i386.rpm".
Then, when run ./oracle-xe start and then ./oracle-xe status I get:
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 29-JUL-2011 23:39:49
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
Linux Error: 2: No such file or directory
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=%hostname%)(PORT=%port%)))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
It does not seem ok to me.
I would love to truy to reconfigure it but if I try the command:
./oracle-xe configure
...I get:
Oracle Database 10g Express Edition is already configured
Does any body know how to reset and reconfigure Oracle 10g for Linux?
Best regards
Fredrikit seems to be "PLSExtProc" bu default.Nope, the ORACLE_SID is taken from the environment variable when the database is started on a *nix host, windows its set up in the database service. If you want to change the ORACLE_SID, set it. See the environment setup script in OH/bin appropriate for your shell. (OH short for $ORACLE_HOME)
how to create a databaseYou mean tablespace?
what you think about this error message ... read from socketWhat do you think about the error message, its your database. Socket read error can be caused by many things, the ora-NNNN error number can provide some insight. http://download.oracle.com/docs/cd/E11882_01/server.112/e17766/toc.htm -
How can i install oracle 10g on linux cluster
Dear all:
please advice How can i install oracle 10g on linux cluster service ..
thanks ,,Without RAC, you can only have one instance manage the database. One instance = one set of processes communicating via IPC.
Unless you know of a way to have processes use memory-based IPC across nodes, you need to pick a node and install & run the database software on that node. -
Oui-10207error while installing oracle 10g on linux in vmware
Hi,
I have installed vmware on windows 7(64 bit) on which i have installed Oracle Enterprise linux 5. I have set all the variables correctly. but when i try to install oracle 10g on linux, i get the error
OUI-10207:there is not enough disk space in the OUI swap area /tmp/OraInstall2011-10-17_03-44-48PM.Please make atleast 529KB of space avaivale and retry.
but i have around 95bg of space. My partitions are as follows
Device Boot Start End Blocks Id System
/dev/sda1 * 1 12551 100815876 83 linux
/dev/sda2 12552 13041 3935925 82 Linux swap/solaris
/dev/sda3 13042 13054 104422+ 83 linux
Please help me in solving the problem.
Thanks
VirajWhat is your swap size? try to increase size
execute below command on terminal, paste result here.
#swapon -s
#free
Tips : how to increase swap space
http://hackertrip.wordpress.com/2011/09/11/increase-swap-space/ -
Imp dmp file in oracle 10g on linux
i have oracle 10g on linux now i want to imp the dmp file to db.
i put the file in /mnt/erp/file.dmp folder.
i log in as oracle user and ....
and start the imp the file as
imp user/password file=/mnt/erp/file.dmp
but it giver error faile to open the file for read.....
what is the problem.....
is there any privillage issue???????????
helped with full syntax...and steps...i copy the dmp file in /mnt/erp folder as root user.
i am going to imp it as oracle user.
sir i don't know about dmp group.
i past the error i got..
[oracle@lnxdb erp]$ imp
Import: Release 10.2.0.1.0 - Production on Wed Oct 10 08:09:37 2012
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Username: FS_10oct2012
Password:
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 -
Production
With the Partitioning, OLAP and Data Mining options
Import file: expdat.dmp > FR_10_10_2012.dmp
IMP-00002: failed to open FR_10_10_2012.dmp for read -
How to install oracle 10g on linux 9.0
am a student in nigeria and my name is tosin, studing oracle 10g on linux 9.0 with oracle partners NIIT. how do i install 9i and 10g on a linux 9.0.
Hello Tosin,
how do i install 9i and 10g on a linux 9.0. Do you mean Red Hat Linux 9 of on Linux AS? www.redhat.com
Anyways
http://www.puschitz.com/InstallingOracle9i.html
Hope this will help you
Cheers
Ravi
http://ravidba-oracle.blogspot.com/ -
Installing Oracle 10g on Windows Server 2008
Hi,
I want to install Oracle 10g on Windows Server 2008. As per Oracle, I should install 10.2.0.3 and then apply patchset 10.2.0.4.
For that, one has to sign in to metalink which is possible only for customers. I am
using Oracle only for educational purposes for now. Is there any other way of using Oracle 10g on Windows 2008?
Thanks,
VladiOf course if you don't have support and for educational purpose only , you should compromise a little by either install other OS or get virtual machine like VMware.
Or stay with 10.2.0.3, that should work in most cases. -
I want to install oracle 10g on linux.
i want to install oracle 10g on linux. my linux is red hat enterprise linux AS release 4. i downloaded 10201_database_linux_x86_64.cpio.gz. now, cksum 10201_database_linux_x86_64.cpio.gz shows 4294967295 while site says 2921604215. if i say gunzip /home/oracle/10201_database_linux_x86_64.cpio.gz gunzip: /home/oracle/10201_database_linux_x86_64.cpio.gz: unexpected end of file. now, please clear these doubts and also give me the link to steps on how to install. tnx
I tried with the following command and it works for me:
cpio -idcmv < 10*
without gzip before
Maybe you are looking for
-
Error while Exporting large data from Reportviewer on azure hosted website.
Hi, I have website hosted on azure. I used SSRS reportviewer control to showcase my reports. while doing so i faced an issue. Whenever i export large amount of data as Excel/PDF/word/tiff it abruptly throw following error: Error: Microsoft.Reporting.
-
IMovie 10 static standard title?
When I choose "standard" for the title, the title gets a Ken Burns effect. How can I get a static title--just white font on a black background?
-
Is there a way to get airplay to work from iOS to my macbook without having to pay for a third-party application? I've been trying to get my iPhone screen to play onto my macbook.
-
Hi.... I have a MacBook White with snow leopard installed... A few days ago, I found that some keystrokes don't work any more...like command-1 and command-2 (in ALL applications, and I checked each button individually and they work just fine "i.e. it
-
The site name goes twice! why?
I made a web site via Iweb. the name is bowling-school.ru. When I publish - in browser it goes twice: www.bowling-school.ru/bowling-school.ru Why does it happen and how can I correct that?