Oracle 10g Installation nn solaris 10 X86
I have installed Oralce 10.1.0.3 in Solaris 10 X86 using the procedure given without creating the database.(Installing the binaries)
Hardware:Sun fire V20z.
When i tried creating Database using DBCA,it was throwing lots of error.
The errors are:
1) ORA-03113: end-of-file on communication channel
2) ORA-03114: not connected to oracle
3) ORA-27100: shared memory realm already exists.
Oracle says nothing to do with Oracle 10g,Check the OS.
Any help on creating a database in Solaris 10 x86 Oracle 10.1.0.3
Thanks in Advance.
check your /etc/system and init.ora
did you set up kernel parameters for oracle in /etc/system?
something like this:
set shmsys:shminfo_shmmax=0xffffffff
set shmsys:shminfo_shmmin=1
set shmsys:shminfo_shmmni=4096
set shmsys:shminfo_shmseg=100
set semsys:seminfo_semmni=4096
set semsys:seminfo_semmsl=4096
set semsys:seminfo_semmns=1000
set semsys:seminfo_semopm=100
set semsys:seminfo_semvmx=32767
the interesting parameter is
set shmsys:shminfo_shmseg=100 - that is maximum amount of oracle processes system can have, if you have something like processes=150 in init.ora, database won't start.
read oracle installation manual on how to set these parameters for a particular machine and database
Similar Messages
-
Help with oracle 10g install on solaris x86
hi, i downloaded solaris 10 from oracle site (sol-10-u8-ga-x86-dvd.iso) and i have installed it on vmware. i was going through the installation guide for oracle 10 for solaris x86 and while on the pre-installation steps, i issued this command
# /bin/isainfo -kv
and it gave me
# 64-bit amd64 kernel modules
instead of
# 32-bit i386 kernel modules
as the guide expected.
please what can i do, cos the guide says if i dont see the later, the installation cannot complete.
thnxFirst check you Operating System Bit information whether it is 64 or 32 bit , for this first check any of the command path
Example ls command
$ which ls
/usr/sbin/ls
$ file /usr/sbin/ls
It will show you whether your OS is 64 bit or 32 bit and accordingly download the software from below link ,if it is showing 64 bit os then you have to download 64 bit database software .
http://www.oracle.com/technetwork/database/database10g/downloads/index.html -
Oracle 10g installation on Solaris
Hi All
We try to run the Installer but getting the following error:
Checking installer requirements...
Checking operating system version: must be 5.8, 5.9 or 5.10. Actual 5.10Passed
Checking Temp space: must be greater than 250 MB. Actual 6269 MB Passed
Checking swap space: must be greater than 500 MB. Actual 7037 MB Passed
Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2009-01-12_04-04-27PM. Please wait ...OSSLAB:oracle>
X Error of failed request: BadAtom (invalid Atom parameter)
Major opcode of failed request: 20 (X_GetProperty)
Atom id in failed request: 0x0
Serial number of failed request: 149
Current serial number in output stream: 149
RegardsHi
We have found the problem. It was the Character set which was En_gb.utf-8. We change it to en_us.iso8859-15, reboot and it worked.
Regards
Jaco -
Problem while installing oracle 10g 2 on solaris x86
bash-3.00$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be 5.10. Actual 5.10
Passed
Checking Temp space: must be greater than 250 MB. Actual 1133 MB Passed
Checking swap space: must be greater than 500 MB. Actual 2070 MB Passed
Checking monitor: must be configured to display at least 256 colors. Actual 1
6777216 Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2008-12-27_11
-46-01PM. Please wait ...bash-3.00$
After that $ prompt I do not get anything... did I miss out something...
bash-3.00$ env |grep -i oracle
OLDPWD=/export/home/oracle
MAIL=/var/mail/oracle
PWD=/export/home/oracle/database
HOME=/export/home/oracle
LOGNAME=oracle
Plz help....I think it has got to do something with my profile...
plz see...
bash-3.00$ cat local.profile
# Copyright (c) 2001 by Sun Microsystems, Inc.
# All rights reserved.
# ident "@(#)local.profile 1.10 01/06/23 SMI"
stty istrip
PATH=/usr/bin:/usr/ucb:/etc:.
export PATH
bash-3.00$
bash-3.00$ echo $DISPLAY
unknown:0.0
bash-3.00$ xclock
bash: xclock: command not found
bash-3.00$ usr/openwin/bin/xclock
bash: usr/openwin/bin/xclock: No such file or directory
bash-3.00$ -
GNU gcc and Oracle 10g/11g on Solaris x86-64- examples?
We are looking at developing an Oracle database app on the above platform. We have the Solaris Studio 12.2, but one of the programmers has a visual impairment which makes using the GUI difficult.
I "think" one might be able to use the GNU gcc series compilers ( which she is familiar with) to develop an app that runs on Solaris, and accesses the database on the same server using the Oracle libraries, but I am unclear on the details. Can someone point me in the right direction to get the information needed, or sample code for using the gcc compilers for database access????I believe you can use gcc for developing Oracle database programs on Solaris. But the best place to ask about database development is in an Oracle database forum:
http://forums.oracle.com/forums/main.jspa?categoryID=84
and look under the Database entry. -
Which 10g release supports Solaris x86 version 10?
Hi,
I downloaded Oracle 10.1.0.3 for Solaris x86. When I installed it, I got error, saying I can only install this version on Solaris 9 x86. Do you have any idea which Oracle 10g version supports Solaris x86 version 10?
Thanks
LHi,
If we believe metalink, Oracle 10gR1 is already certified for Solaris x86
Solaris Operating System x86 Version 10
Oracle Database - Enterprise Edition Version 10g
Status: Certified
Certification Note:
Install Information:
o 1. Execute runInstaller with the -ignoreSysPrereqs option.
o 2. Select 'Do not create a starter database' when installing Oracle 10g.
o 3. During installation, the warning message 'SUNWsprox package not installed' can be ignored. Press Continue to resume the installation.
o 4. Download and install patch 4186426 from metalink.oracle.com after installing Oracle 10g software.
o 5. If you have an End User Solaris 10 distribution, install the SUNWuiu8 package prior to installing the 10g client.
Have you run installer like recommended in point 1 ?
For 10gR2, you need to wait december for certification.
Nicolas. -
SUNWsprox package with solaris 10 for Oracle 10g Installation....
Hi
I am in problem with a Solaris 10 package "SUNWsprox - Sun workshop Bundled 64-bit make library" for Oracle 10g Installation. I checked the CDs (In the /.../products) but did't found this packege. Can any one tell me please can I go without this package or where I found this package...Please Its very URGENT for me....
Thanks
Mohammed TanvirHi...
I had the same issue, but found out that the SUNWsprox was replaced by SUNWsprot. The OUI 10.1 Release 2 will 'pass' as the doco in the Oracle quick install guide is wrong (as well as 10g Application Server).
The only way to lay a 10g Release database on Solaris 10 is to lay the software doen only, then cd in the .../bin directory, step your Rdbms ORACLE_HOME, ORACLE_SID, LD_LIBRARY_PATH and of course the DISPLAY (is X-windowing into the server), and run dbca manually. Oracle 10g is a bit buggy.
Roger -
Installing Oracle 10g RS2 in Solaris 10
Hello Guys .. I need a tutorial on "How to Install Oracle 10g RS2" on Solaris 10 .. Please help me ...
hi
what do u mean by Oracle 10g RS2 what RS2 stands for
well
Oracle installation of 10G Release 2 on solaris
if its x86 then see this
http://download.oracle.com/docs/cd/B19306_01/relnotes.102/b15696/toc.htm
if its sparc64 then see this
http://download.oracle.com/docs/cd/B19306_01/relnotes.102/b15689/toc.htm
if this x86-64 then this
http://download.oracle.com/docs/cd/B19306_01/relnotes.102/b15703/toc.htm
hope this helps
CHeers -
Can I run 32 bit version of Oracle 10g grid on Linux x86-64?
Since Oracle did not release 64 bit version of Oracle 10g grid for Linux X86-64. Can I run 32 bit version of Oracle 10g grid on Linux x86-64? If so did anyone tried this? and also any known issues?
All I had to do was use the 32bit version of "/usr/bin/gcc" and "/usr/bin/g++" to run the installation
That is:
bin]# cp -p /usr/bin/gcc /usr/bin/gcc_old
bin]# mv /usr/bin/gcc /usr/bin/gcc323
mv: overwrite `/usr/bin/gcc323'? y
bin]# ln -s /usr/bin/gcc296 /usr/bin/gcc
bin]# cp -p /usr/bin/g++ /usr/bin/g++_old
bin]# mv /usr/bin/g++ /usr/bin/g++323
mv: overwrite `/usr/bin/g++323'? y
bin]# ln -s /usr/bin/g++296 /usr/bin/g++
AFTER INSTALLATION REMEMBER TO
move back the 64bit files to their former state.
bin]#rm /usr/bin/g++
bin]#rm /usr/bin/gcc
bin]#mv /usr/bin/gcc_old /usr/bin/gcc
bin]#mv /usr/bin/g++_old /usr/bin/g++ -
Please help me, a problem when install oracle 10g on the solaris 10
currently, I am installing the oracle 10g on the solaris 10, I am using DHCP and
my computer has no hostname, the following is copied from the 10g document,
When you run Oracle Universal Installer, an error may occur if name resolution is not set up. To avoid this error, before you begin installation, you must ensure that host names are resolved only through the /etc/hosts file.
To ensure that host names are resolved only through the /etc/hosts file:
1.
Verify that the /etc/hosts file is used for name resolution. You can do this by checking the hosts file entry in the nsswitch.conf file as follows:
# cat /etc/nsswitch.conf | grep hosts
The output of this command should contain an entry for files.
2.
Verify that the host name has been set by using the hostname command as follows:
# hostname
The output of this command should be similar to the following:
myhost.mycomputer.com
currently, when I use hostname command, it is unknown, what should I do to add
my hostname? thanksSince this is related to Solaris, you will most likely get a better/faster response on a Sun Solaris forum rather than here.
Srini -
Oracle 10g Installation Problem on SUSE Linux 10
Hello Friends,
I want to install SAP Solution Manager 7.0 with Oracle 10g on SUSE Linux 10.0.
But, while starting the Installation i am getting following Errors.
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1,
asianux-2 or SuSE-10
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2009-04-22_03-59-38PM. Please wait ...
Error in writing to directory /tmp/OraInstall2009-04-22_03-59-38PM. Please ensure that this directory is
writable and has atleast 60 MB of disk space. Installation cannot continue.
: Success
I have checked the Permissions and the Size of /tmp Directory, which is as followed:
drwxr-xr-x 11 root root 0 2009-04-22 21:19 sys
drwxrwxrwt 52 root root 1824 2009-04-22 16:00 tmp
drwxr-xr-x 15 root root 408 2009-04-19 14:43 usr
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda10 2104376 73112 2031264 4% /tmp
I am starting the Oracle 10g Installation within orasm7 User which is a member of dba, users, disk groups.
The directories which are created upon starting the Oracle Installation in /tmp directory are having the situations as followed:
drwxr-xr-x 3 orasm7 dba 128 2009-04-21 18:41 OraInstall2009-04-21_06-41-14PM
drwxr-xr-x 3 orasm7 dba 128 2009-04-21 18:41 OraInstall2009-04-21_06-41-25PM
drwxr-xr-x 3 orasm7 dba 128 2009-04-22 15:59 OraInstall2009-04-22_03-59-38PM
The Oracle Installation log is as follwoed:
Using paramFile: /home/MyData/51031676/database/install/oraparam.ini
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1, asianux-2 or SuSE-10
Passed
All installer requirements met.
The commandline for unzip:
/home/MyData/51031676/database/install/unzip -qqq ../stage/Components/oracle.swd.jre/1.4.2.0.8
/1/DataFiles/\*.jar -d /tmp/OraInstall2009-04-22_03-59-38PM
I have set DISPLAY variable in this way before starting Installation:
DISPLAY=$HOSTNAME:0.0
export DISPLAY
I tried to search the solution over the internet for this kind of problem, but i am not able to find its solution. Even i tried to start the Orale installation using this parameter: ./runInstaller ignoreSysPrereqs, but still it is giving the same unexpected error.
I have a doubt on File/Directory permissions which are created for Installation in /tmp. The umask setiing of the system is 0022.
Please, help me for this issue.
Thanks & Regards,
Bhavik G. ShroffHi Markus,
How are you ?
Thank you very much for your reply.
I was executing wrong runInstaller file. RUNINSTALLER is right file for starting the execution. But still i am facing the same error, which is as followed.
Preparing response files. Please wait:
======================================
Working on /home/MyData/51031676/database/SAP/SVRCUSTOM.RSP
/home/MyData/51031676/database/SAP/SVRCUSTOM.RSP --> /tmp/.orainst_rsp.27450: Done
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1, asianux-2 or SuSE-10
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /home/orasm7/tmpora/OraInstall2009-04-22_05-25-26PM. Please wait ...
Error in writing to directory /home/orasm7/tmpora/OraInstall2009-04-22_05-25-26PM. Please ensure that
this directory is writable and has atleast 60 MB of disk space. Installation cannot continue.
: Success
SHROFF:~ # cd /home/orasm7/tmpora/
SHROFF:/home/orasm7/tmpora # ll
total 0
drwxr-xr-x 3 orasm7 dba 128 Apr 22 17:25 OraInstall2009-04-22_05-25-26PM
SHROFF:/home/orasm7/tmpora # cd OraInstall2009-04-22_05-25-26PM/
SHROFF:/home/orasm7/tmpora/OraInstall2009-04-22_05-25-26PM # ll
total 4
drwxr-xr-x 2 orasm7 dba 304 Apr 22 17:25 images
-rwxr-xr-x 1 orasm7 dba 504 Apr 22 17:25 installActions2009-04-22_05-25-26PM.log
SHROFF:/home/orasm7/tmpora/OraInstall2009-04-22_05-25-26PM #
I have a doubt on tmp_netca_file & tmp_dbca_file variable.
Please give your suggestion for the same.
Regards,
Bhavik G. Shroff
Edited by: Bhavik G. Shroff on Apr 22, 2009 2:10 PM -
Oracle 10g installation on Windows 7
I am currently using Oracle 10g on my laptop running on Windows Vista. Now i am planning to upgrade my OS to Windows 7. My question here, is can I use the same Oracle 10g installable to install in windows 7 also ??
is it possible ??
thanks,
JJPossible yes? Brilliant no!
Windows 7 is totally uncertified and unsupported with all Oracle products and if you have an issue there is essentially no support or patch available.
Personally I think Vista a cruel joke so my recommendation would be to go to XP SP3 which at least has the attribute of stability or move to Linux which is what I did on one of my laptops. -
Oracle 10g installation on aix 52
Oracle 10g installation is failing on a
aix52 64bit machine
After installing the product running
$ORACLE_HOME/root.sh for setup as user root results
in the following errors:
exec(): 0509-036 Cannot load program /dbms/oracle/10g/OraHome/bin/crsctl.bin because of the following errors:
0509-130 Symbol resolution failed for /dbms/oracle/10g/OraHome/lib/libttsh10.a[shr_ttsh10.o] because:
0509-136 Symbol aio_nwait_timeout (number 324) is not exported from
dependent module /unix.
0509-022 Cannot load module /dbms/oracle/10g/OraHome/lib/libhasgen10.a(shr_hasgen10.o).
0509-150 Dependent module libttsh10.a(shr_ttsh10.o) could not be loaded.
0509-026 System error: Cannot run a file that does not have a valid format.
0509-192 Examine .loader section symbols with the
'dump -Tv' command.
exec(): 0509-036 Cannot load program /dbms/oracle/10g/OraHome/bin/clscfg because of the following errors:
0509-130 Symbol resolution failed for /dbms/oracle/10g/OraHome/lib/libttsh10.a[shr_ttsh10.o] because:
0509-136 Symbol aio_nwait_timeout (number 324) is not exported from
dependent module /unix.
0509-022 Cannot load module /dbms/oracle/10g/OraHome/lib/libhasgen10.a(shr_hasgen10.o).
0509-150 Dependent module libttsh10.a(shr_ttsh10.o) could not be loaded.
0509-026 System error: Cannot run a file that does not have a valid format.
0509-192 Examine .loader section symbols with the
'dump -Tv' command.
Failed to initialize Oracle Cluster Registry for cluster
Any suggenstion on this will be appreciated.Would like to see the http://download-west.oracle.com/docs/cd/B19306_01/relnotes.102/b19074/toc.htm#CJAFJGIC or for linux, see http://www.puschitz.com/InstallingOracle10g.shtml.
Its trustworthy sites and my request is to delete all the files and start clean-installation again.
Revert back if any clarifications required.
Regards,
Star Nirav
Oracle 10g installation is failing on a
aix52 64bit machine
After installing the product running
$ORACLE_HOME/root.sh for setup as user root results
in the following errors:
exec(): 0509-036 Cannot load program
/dbms/oracle/10g/OraHome/bin/crsctl.bin because of
the following errors:
0509-130 Symbol resolution failed for
/dbms/oracle/10g/OraHome/lib/libttsh10.a[shr_ttsh10.o
because:
0509-136 Symbol aio_nwait_timeout (number
324) is not exported from
dependent module /unix.
annot load module
/dbms/oracle/10g/OraHome/lib/libhasgen10.a(shr_hasgen1
0.o).
0509-150 Dependent module
libttsh10.a(shr_ttsh10.o) could not be loaded.
0509-026 System error: Cannot run a file that
does not have a valid format.
0509-192 Examine .loader section symbols with
the
'dump -Tv' command.
Cannot load program
/dbms/oracle/10g/OraHome/bin/clscfg because of the
following errors:
0509-130 Symbol resolution failed for
/dbms/oracle/10g/OraHome/lib/libttsh10.a[shr_ttsh10.o
because:
0509-136 Symbol aio_nwait_timeout (number
324) is not exported from
dependent module /unix.
annot load module
/dbms/oracle/10g/OraHome/lib/libhasgen10.a(shr_hasgen1
0.o).
0509-150 Dependent module
libttsh10.a(shr_ttsh10.o) could not be loaded.
0509-026 System error: Cannot run a file that
does not have a valid format.
0509-192 Examine .loader section symbols with
the
'dump -Tv' command.
lize Oracle Cluster Registry for cluster
Any suggenstion on this will be appreciated. -
Error encounded during oracle 10g installation on mac os 10x
Hi All,
I am installing oracle 10g on my mac laptop os 10 x, I am getting the below error during execution of dbca script for db creation, I am not able to proceed further, please advice
[Thread-3] [17:11:23:18] [BasicStep.execute:202] Executing Step : CLONE_DB_CREATION_RMAN_RESTORE
[Thread-3] [17:11:23:18] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-01092
[Thread-3] [17:11:23:18] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-01034
[Thread-3] [17:11:23:18] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-03114
[Thread-3] [17:11:23:18] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-12560
[Thread-3] [17:11:23:18] [StepErrorHandler.setIgnorableErrors:250] setting Ignorable Error: ORA-01109
[Thread-3] [17:11:23:19] [BasicStep.configureSettings:304] messageHandler being set=null
[Thread-3] [17:11:23:20] [BasicStep.execute:202] Executing Step : INSTANCE_CREATION
[Thread-3] [17:11:23:20] [BasicStep.configureSettings:304] messageHandler being set=null
[Thread-3] [17:11:23:25] [InitParamAttributes.sortParams:3532] m_sortOn:-1 sortOn:4
[Thread-3] [17:11:23:53] [Host.noEntryinOratab:5115] Check made for oratab arg passed............
[Thread-3] [17:11:23:53] [Oratab.getTempFile:710] Temp oratab: /tmp/oratab
[Thread-3] [17:11:23:94] [BasicStep.configureSettings:304] messageHandler being set=oracle.sysman.assistants.util.UIMessageHandler@29da77
[Thread-3] [17:11:23:95] [CloneRmanRestoreStep.executeImpl:217] Instance Creation went fine..........
[Thread-3] [17:11:23:96] [CloneRmanRestoreStep.executeImpl:224] db_recovery_file_dest=/app/oracle/flash_recovery_area
[Thread-3] [17:11:23:96] [CloneRmanRestoreStep.executeImpl:227] db_recovery_file_dest_size=2147483648
[Thread-1] [17:11:24:476] [BasicStep.handleNonIgnorableError:430] oracle.sysman.assistants.util.UIMessageHandler@29da77:messageHandler
[Thread-1] [17:11:24:476] [BasicStep.handleNonIgnorableError:431] ORA-12547: TNS:lost contact
:msg
[Thread-3] [17:11:27:466] [SQLEngine.done:1966] Done called
oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-12547: TNS:lost contact
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1482)
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.connect(SQLEngine.java:829)
at oracle.sysman.assistants.dbca.backend.CloneRmanRestoreStep.executeImpl(CloneRmanRestoreStep.java:244)
at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
at oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2488)
at java.lang.Thread.run(Thread.java:552)
[Thread-3] [17:11:27:470] [BasicStep.configureSettings:304] messageHandler being set=oracle.sysman.assistants.util.UIMessageHandler@29da77
[Thread-3] [17:11:27:470] [StepContext$ModeRunner.run:2504] oracle.sysman.assistants.dbca.backend.CloneRmanRestoreStep.executeImpl(CloneRmanRestoreStep.java:435)
oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2488)
java.lang.Thread.run(Thread.java:552)
Thanks
VijayaprakashDuplicate post - Error encounded during oracle 10g installation on mac os 10x
Srini -
OracleAS 10g installation (please Help)
Hi All
i want a help in[b] OracleAS 10g installation
in the first step in it's installation . must install oracleAS infrastracture . in my way to install it many Errors & messages appears to me
this Errors & messages in 4 pictures to see it .. hope to find a solution for this
th pictures in this links
1- http://www.araboug.org/ib/index.php?act=Attach&type=post&id=5413
2- http://www.araboug.org/ib/index.php?act=Attach&type=post&id=5414
3- http://www.araboug.org/ib/index.php?act=Attach&type=post&id=5415
4- http://www.araboug.org/ib/index.php?act=Attach&type=post&id=5416
after pressing ignor in the forth screen many errors & messages appears to meOracle AS10g = 10.1.2.0.2 I presume...
However, my first questions is still valid "The questions is if you followed EVERY step outlined in the Application Server Installation Guide? If you did, then there should be no errors."
I have had similar issues when environment variables was still set during installations, ORACLE_HOME etc. You must unset those, as described in the Installation Guide, before starting an installations.
Please check these two Metalink Notes:
295446.1 "OracleCSService service may fail to start during the install of IAS 10.1.2 on Windows"
365046.1 "The Infrastructure DBCA Stops with Error "Failed to initialize OCR"
Regards,
Martin
Maybe you are looking for
-
Selecting one cursor at a time and then reading its value
I am a novice LabView user. I am trying to develop a program in which I have to select portions of a waveform and delete the outliers. The problems I run into is selecting cursors at a time and then reading its value. I was using Active Cursor. Idea
-
hi, All the while, I'm an ASP Developer, but now have interest to become a JSP Developer. As a beginner, I'm here would like to know, what are the most famous JSP web development tools that are used for most of the JSP developer. I'm now using notepa
-
The required email field in the registration
Hello, Our application was rejected due to the fact that email field is one of the required fields that has to be completed during the registration. The application is aimed at books sale and purchase. We use in-app purchase via the AppStore, the nex
-
Lost Security Profile Password
I'm using Acrobat Pro 7.0 and have misplaced the password on a security profile. When I originally set it up, I checked the box that said "Save Passwords with Policy". Is there a way I can retrieve the password from my Windows XP system?
-
Can't install N-GAGE update error
I have a second brandnew N96. The first had a fabric failure. A piece of plastic was blocking the speaker. So when i made a phonecall i couldn't here the "other side". On that same N96 the N-GAGE application failed to install. I tried to download it