Oracle 10g installation on Windows 2008 VMware

Hi everybody,
hope you can help me with that issue; I try to install a ECC 6.0 test-system with Oracle 10g on a Windows 2008 VMware instance.
I am getting a strange error when executing sapserver.cmd when I try to install the Oracle software; the Oracle Universal Installer 10.2 is aborting at the very beginning with an error popup with following content. First I enter the Drive letter for installation and SID and then OUI trys to start...
The program was not closed properly. An internal error occured. Please provide Oracle support with following datas:
"unknown"
"unknown"
"unknown"
Any ideas? I did not find anything in Metalink or on the SAP Marketplace. And I am aware that Oracle is not official supported on VMWare; on Windows 2003 I did not occur any similar problems.
kind regards
Philipp

The OUI doesn´t work (yet) on Windows 2008, you will need to wait for the OUI 10.2.0.4.
Markus

Similar Messages

Is Oracle 10g compatible with windows 2008?

Hi All,
Is Oracle 10g compatible with windows 2008?
What are the OS's oracle 10g compatible with? Is it compatible with VMware environment too?
Regards
Arun

user12273523 wrote:
Hi All,
Is Oracle 10g compatible with windows 2008? Yes
What are the OS's oracle 10g compatible with? Is it compatible with VMware environment too?please check
http://www.oracle.com/technology/software/products/database/index.html
Regards
Rajesh

Oracle ebs installation on windows 2008 R2

Hi Hussein,
I am doing oracle EBS installation on windows 2008. As per installation doc below are the pre-requisite
The Prerequisites Software are:
1.Chose and Operating System windows 2008 (32 bit):
Select the Windows Operating system and install it. After installed OS successfully need to change DNS entries or Active Directories as per your environment.
2.Install the Microsoft Visual C++ 2008 software.
See the post for installation of – Microsoft Visual C++ 2008
3.Install the MKS Toolkit – Versions 9.0 (Patch 3 or higher):
See the post for installation of – MKS Toolkit.
I wanted to know that is there any alternate of MKS tool kit as I am unable to get it .
Regards,
Raj

hi Raj
3.Install the MKS Toolkit – Versions 9.0 (Patch 3 or higher):
See the post for installation of – MKS Toolkit.
I wanted to know that is there any alternate of MKS tool kit as I am unable to get it .
Yes go for cygwin
please see
Using Cygwin to Maintain Oracle E-Business Suite Release 12 on Windows[Article ID 414992.1]
Oracle E-Business Suite R12 Installation Steps on Windows XP
;) AppsMAstI :)
Sharing is Caring

Oracle 10g installation on Windows 7

I am currently using Oracle 10g on my laptop running on Windows Vista. Now i am planning to upgrade my OS to Windows 7. My question here, is can I use the same Oracle 10g installable to install in windows 7 also ??
is it possible ??
thanks,
JJ

Possible yes? Brilliant no!
Windows 7 is totally uncertified and unsupported with all Oracle products and if you have an issue there is essentially no support or patch available.
Personally I think Vista a cruel joke so my recommendation would be to go to XP SP3 which at least has the attribute of stability or move to Linux which is what I did on one of my laptops.

Oracle 10g instalation on windows 2008 64 bit getting error

Hi,
I am trying to install Oracle 10g database(10204_vista_w2k8_x64_production_db) ON windows 2008 release 2 sevice pack1. i am getting following errors.
please give me solution how to install.
Checking operating system requirements ...
Expected result: One of 5.0,5.1,5.2,6.0
Actual Result: 6.1
Check complete. The overall result of this check is: Failed <<<<
Problem: Oracle Database 10g is not certified on the current operating system.
Recommendation: Make sure you are installing the software on the correct platform.
=======================================================================
Checking service pack requirements ...
Check complete. The overall result of this check is: Not executed <<<<
OUI-18001: The operating system 'Windows Vista Version 6.1' is not supported.
Recommendation: Install the recommended Service Pack.
=======================================================================
Checking physical memory requirements ...
Expected result: 256MB
Actual Result: 3956MB
Check complete. The overall result of this check is: Passed
=======================================================================
Checking Network Configuration requirements ...
Actual Result: :Native Library C:\Users\Administrator\AppData\Local\Temp\1\OraInstall2011-06-21_11-06-53AM\bin\win64\DHCPPrereq.dll already loaded in another classloader
Check complete. The overall result of this check is: Not executed <<<<
Recommendation: Oracle supports installations on systems with DHCP-assigned IP addresses; However, before you can do this, you must configure the Microsoft LoopBack Adapter to be the primary network adapter on the system. See the Installation Guide for more details on installing the software on systems configured with DHCP.
=======================================================================
Checking the length of PATH environment variable...
Check complete. The overall result of this check is: Passed
=======================================================================
Validating ORACLE_BASE location (if set) ...
Check complete. The overall result of this check is: Passed
=======================================================================
Checking Oracle Home path for spaces...
Check complete. The overall result of this check is: Passed
=======================================================================
Checking Oracle Home path for location ...
Check complete. The overall result of this check is: Passed
=======================================================================
Checking for proper system clean-up....
Actual Result: :java.lang.UnsatisfiedLinkError:Native Library C:\Users\Administrator\AppData\Local\Temp\1\OraInstall2011-06-21_11-06-53AM\bin\win64\sidqueries.dll already loaded in another classloader
Check complete. The overall result of this check is: Not executed <<<<
Recommendation: You must completely remove the ASM instance by removing the ASM service from the Service Control Manager, or you must configure it properly by ensuring that the ASM service is associated with a valid Oracle Home where ASM is configured.
=======================================================================
Checking for Oracle Home incompatibilities ....
Actual Result: NEW_HOME
Check complete. The overall result of this check is: Passed
=======================================================================

10..2.0.4 not certified for Windows Server 2008 64bit, If you want install this software , you need to apply patch 10.2.0.5 patch
10.2.0.4 is on certified for windows Server 2008 32bit (x86), so you can install the software without apply patch but If you want to install windows 7 , you need to apply patch.
Read 4th steps
http://www.oracle.com/technetwork/database/10204-winx64-vista-win2k8-082253.html

Oracle 10g installation on Windows 7 (32 bit OS)

My Operating system is Windows 7 Ultimate (32 bit OS), I have downloaded below Oracle 10g version from oracle site.
"Oracle Database 10g Release 2 (10.2.0.3/10.2.0.4) for Microsoft Windows Vista, Windows Server 2008, Windows 7"
Link - http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html
At the time of installation it is giving OS Compatibility error.
Can anybody tell me, is this the right version? or is there any prerequisite required before installation ?
Please guide me.

You will need to follow the instructions here - http://download.oracle.com/docs/cd/B19306_01/relnotes.102/b15680/toc.htm#BABEBBJF
10.2.0.3 and 10.2.0.4 are not certified with Win 7 - you will need to upgrade to 10.2.0.5 - this assumes you have access to My Oracle Support in order to download the patch.
HTH
Srini

Oracle 10g R2 on Windows 2008 Server

Hi all,
Can I install Oracle 10g Release 2 on Windows Server 2008 64-bit? If not, is there any workaround solution? Our brand new server was shipped with Windows Server 2008 CD and we cannot install Windows 2003 on that machine.
Thanks in advance.

Please note that AS 10g R2 is not certified on Windows 2008, as per:
Oracle Application Server 10g Release 2 (10.1.2.0.2) Certification Information
[http://www.oracle.com/technology/software/products/ias/files/as_certification_r2_101202.html]
All certifications are posted here:
http://www.oracle.com/technology/software/products/ias/files/fusion_certification.html
Version 10.1.3 is certified on Windows 2008 and 2008 R2, noting that this is not an upgrade from 10.1.2. It provides a different suite of products. You can decide on 10.1.2 verses 10.1.3 depending on your needs. For all product offerings, the Oracle Fusion Middleware 11g (11.1.1.) is certified on 2008 and 2008 R2.

MasterTax/Oracle 10g Installation error, Server 2008 Virtual

After downloading the provided files via MasterTax, extracting them into the root of a secondary hard drive, and attempting to run "setup.exe" I recieve the following error.
"Abnormal program termination. An internal error has occurred. Please provide the following files to Oracle Support:
"Unknown"
"Unknown"
"Unknown"
I have searched through numerous threads and tried almost every solution found for the respective error.. I am at a loss on what to do. This is a mission critical install for my company so any and all advice is welcome.

It is also worth noting that when launching setup.exe I get the following in a windows command prompt:
no prerequisite checks found in oraparam.ini, no pre-requesite checks will be performed"
and the following log is pulled from my c:\users\*Username*\temp\2 folder:
Using paramFile: G:\Oracle10g_DB32bit\install\oraparam.ini
No pre-requisite checks found in oraparam.ini, no system pre-requisite checks will be executed.
The commandline for unzip:
G:\Oracle10g_DB32bit\install\unzip -qqq ../stage/Components/oracle.swd.jre/1.4.2.8.0/1/DataFiles/"*.jar" -d "C:\Users\ADMINI~1.STA\AppData\Local\Temp\2\OraInstall2010-06-14_12-14-49AM"
The commandline for unzip:
G:\Oracle10g_DB32bit\install\unzip -qqq ..\stage\Components\oracle.swd.oui\10.2.0.1.0\1\DataFiles\/"*.jar" -d "C:\Users\ADMINI~1.STA\AppData\Local\Temp\2\OraInstall2010-06-14_12-14-49AM"
The commandline for unzip:
G:\Oracle10g_DB32bit\install\unzip -qqq ..\stage\Components\oracle.swd.oui.core\10.2.0.1.0\1\DataFiles\/"*.jar" -d "C:\Users\ADMINI~1.STA\AppData\Local\Temp\2\OraInstall2010-06-14_12-14-49AM"
The number of files bootstrapped for the jre is 584.
The number of files bootstrapped for the oui is 100.
Edited by: user13289699 on Jun 13, 2010 10:24 PM

Problem In Data Base Creation... Oracle 10g server in windows server 2008

I have installed Oracle 10g server in windows server 2008 and the domain & active directory r created now i am trying to create the databse i am getting usual error (tns protocol adapter error ) in the 2% i have removed the domain and the active directory from windows then i created but this is not a solutions i need to create the data base in the domain server...

this is a forms forum.
please post in Database Installation

Oracle 11g RAC installation on windows 2008 64 bit

Hello Everyone,
can i get some details regarding Oracle 11g RAC installation on windows 2008,
minimum Hardware Requirement
Will windows support ASM
Can i get a documentation regarding the RAC installation on windows. we were planning to have 11.5 on windows 2008.
please send me some docs regarding os requirements, installation and ASM details.
Thank you

Hi Everyone,
I installed Oracle RAC 11g on Windows 2008 64 bit, The installation was successfull crs_state -t executed successfully.
Bt the machine got crashed ,when executed a select query with 100 sessions( For performance evaluation using TG). A blue screen is appeared on two nodes. So i am not able to evaluate the performance.
Can you please tell any suggesstions to solve this issue? Is our hardware is not sufficient? Or any software settings has to be done?. I tried most of hte technique ,bt the problem still exists.
The following machine configuration is used for Oracle RAC setup
Intel Core 2 Duo 2.66 GHz,
Ram :4GB.
OS : windows 2008 Server 64 Bit
Oracle RAC , Clusterware 11g R2 64 Bit.

Best practice for installation oracle 11g rac on windows 2008 server x64

hello!
can somebody tell me a good book or an other kind of literature regarding "best practice for installation oracle 11g rac on windows 2008 server x64"? thx in advance!
best regards,
christian

Hi Christian,
Check this on MOS
*RAC Assurance Support Team: RAC Starter Kit and Best Practices (Windows) [ID 811271.1]*
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=BULLETIN&id=811271.1
DOC Modified: 14-DEC-2010
Regards,
Levi Pereira

Oracle Client 10g/11g on Windows 2008, Itanium

Hi, All!
I need to install Oracle Client on test Windows 2008 Server, based on Itanium processors.
11g client is preferred, and 10g client at least.
I know, that Win2008 is not supported yet for Oracle Database, but, may be, there are way to install it on my own risk (its test server).

Sorry for coming back late on this thread... I have installed Oracle 11g on Windows 2008 but it was a Xeon processor not Itanium.
On a side note, am I wrong in saying Oracle should not be bothered about the underlying hardware (whether Intel or AMD or any proprietary hardware)? It is then the responsibility of the operating system to ensure that the product behavio(u)r is same across platforms.

When will Oracle 10g/11g support Windows Server 2008 and AIX6.1

Hi all
I'm sorry if I post it in a wrong place... But I really want to know when will Oracle 10g/11g support Windows Server 2008 and AIX 6.1?
I've searched in metalink but found nothing useful. Is there anybody can give me a link of Oracle's roadmap for platform support?
Thanks!

Oracle does not announce release dates and neither
does any other software company.But Oracle does have a very good track record of supporting their products on new windows releases extremely close to the windows release date. Clearly they can't support on an unreleased platform though. Given that the launch of Server 2008 isn't even complete worldwide yet (19th March in the UK for example) it would seem that this enquiry is a little premature.
Niall Litchfield
http://www.orawin.info/

Installation Oracle 10g XE on Windows 7 32bit

Hi!
Is anyone try (with good results) to install Oracle 10g XE on Windows 7 32bit ?:)
Regards

Hi;
Please follow below and see its helpful for your issue:
Re: How I can to Install Oracle 10g in Windows 7?
How to install Oracle DB 10g on Windows 7?
Regard
Helios

Oracle RAC 11g on Windows 2008 64 bit - blue screen error on both nodes

Hi Everyone,
I installed Oracle RAC 11g on Windows 2008 64 bit, The installation was successfull and crs_state -t shows all services in two nodes are online.
When executed a select query with 100 sessions( For performance evaluation using Transaction generator ) ,the machine got crashed and blue screen is appeared on two nodes. I restrated the machines and and starts the same evaluation ,bt the same bug is repeating.
Can anyone suggest a solution to solve this issue? Is our hardware is not sufficient ? Shall we need to perform any
specific settings in Oracle RAC setup for performance evaluations?
Is our settings for load balancing is not enough? ( We added "Load Balancing= On" on tnsnames.ora on client for load
balancing)
The following machine configuration is used for Oracle RAC setup
Intel Core 2 Duo 2.66 GHz,
Ram :4GB.
OS : windows 2008 Server 64 Bit
Oracle RAC 11g , Clusterware 11g R2 , ASM with 5 raw disk ( 1- votting disk ,1- ocr files and 3 disk files)
Edited by: user2033016 on Jun 29, 2011 10:02 PM

user2033016 wrote:
Hi Everyone,
I installed Oracle RAC 11g on Windows 2008 64 bit, The installation was successfull crs_state -t executed successfully.
Bt the machine got crashed ,when executed a select query with 100 sessions( For performance evaluation using TG). A blue screen is appeared on two nodes. So i am not able to evaluate the performance.
Can you please tell any suggesstions to solve this issue? Is our hardware is not sufficient? Or any software settings has to be done?. I tried most of hte technique ,bt the problem still exists.
The following machine configuration is used for Oracle RAC setup
Intel Core 2 Duo 2.66 GHz,
Ram :4GB.
OS : windows 2008 Server 64 Bit
Oracle RAC , Clusterware 11g R2 64 Bit.i guess you have installed/configured RAC using VMware. i guess, the problem is with your RAM size. how much disk space and RAM size you have allocated for each machine?
which documentation you have followed?

Oracle 10g installation on Windows 2008 VMware

Similar Messages

Maybe you are looking for