Oracle 10g installation ora 12154 i really need help anyone

history: reinstallation, can't pass ora 12154; system windows xp sp2 problem ora 12154
Destination Folder: L:\oraclexe\
Port for 'Oracle Database Listener': 1521
Port for 'Oracle Services for Microsoft Transaction Server': 2030
Port for HTTP Listener: 8081
My friend, I believe you created a mess by Installing Oracle 10g Enterprise with your DHCP enable in Windows.
There are only 2 options if you want to install Oracle 10g Enterprise on Windows.
1. You install it using Static IP or not connected to network
2. You install Microsoft Loopback, it is a virtual Network driver and this should be assigned as your primary Network driver instead of your current Network.
So if you don't want any headache, the easiest way is uninstall your Oracle 10g, disable the DHCP and use static instead, then install again. that will work for sure.
Don't try to play with the listener and everything because you will get into deeper and deeper problem that end up into frustration :(
cheers
Edited by: Chubbyd4d on May 19, 2009 12:58 PM
Destination Folder: L:\oraclexe\
Port for 'Oracle Database Listener': 1521
Port for 'Oracle Services for Microsoft Transaction Server': 2030
Port for HTTP Listener: 8081
My friend, I believe you created a mess by Installing Oracle 10g Enterprise with your DHCP enable in Windows.
There are only 2 options if you want to install Oracle 10g Enterprise on Windows.
1. You install it using Static IP or not connected to network
2. You install Microsoft Loopback, it is a virtual Network driver and this should be assigned as your primary Network driver instead of your current Network.
So if you don't want any headache, the easiest way is uninstall your Oracle 10g, disable the DHCP and use static instead, then install again. that will work for sure.
Don't try to play with the listener and everything because you will get into deeper and deeper problem that end up into frustration :(
cheers
Edited by: Chubbyd4d on May 19, 2009 12:58 PM
clean start
================================================================================================================
Output generated from configuration assistant "Oracle Net Configuration Assistant":
Parsing command line arguments:
Parameter "orahome" = N:\oracle10g
Parameter "orahnam" = OraDb10g_home1
Parameter "instype" = typical
Parameter "inscomp" = client,oraclenet,javavm,server,ano
Parameter "insprtcl" = tcp,nmp
Parameter "cfg" = local
Parameter "authadp" = NO_VALUE
Parameter "nodeinfo" = NO_VALUE
Parameter "responsefile" = N:\oracle10g\network\install\netca_typ.rsp
Done parsing command line arguments.
Oracle Net Services Configuration:
Profile configuration complete.
The information provided for this listener is currently in use by other software on this computer.
Listener start failed. Listener may already be running.
Listener configuration complete.
Default local naming configuration complete.
Oracle Net Services configuration successful. The exit code is 0
Configuration assistant "Oracle Net Configuration Assistant" succeeded
================================================================================================================
Output generated from configuration assistant "iSQL*Plus Configuration Assistant":
iSQL*Plus 10.1.0.2.0
Copyright (c) 2004 Oracle. All rights reserved.
Starting iSQL*Plus ...
iSQL*Plus started.
Configuration assistant "iSQL*Plus Configuration Assistant" succeeded
================================================================================================================
Output generated from configuration assistant "Oracle Database Configuration Assistant":
Configuration assistant "Oracle Database Configuration Assistant" failed
================================================================================================================
Output generated from configuration assistant "Oracle Database Configuration Assistant" (attempt 2):
Configuration assistant "Oracle Database Configuration Assistant" failed
================================================================================================================
Output generated from configuration assistant "Oracle Database Configuration Assistant" (attempt 3):
Configuration assistant "Oracle Database Configuration Assistant" failed
install microsoft loop back adapter okay
ip 10.10.1.1
255.255.255.0
still ora 12154
disable dhcp client on services.msc
still ora 12154
pls help
this is a fresh install
do i need to remove my oracle 10xe which is perfect working installed on a different drive
pls help me
Edited by: oraclehelper on May 20, 2009 1:45 AM

Destination Folder: L:\oraclexe\
Port for 'Oracle Database Listener': 1521
Port for 'Oracle Services for Microsoft Transaction Server': 2030
Port for HTTP Listener: 8081
My friend, I believe you created a mess by Installing Oracle 10g Enterprise with your DHCP enable in Windows.
There are only 2 options if you want to install Oracle 10g Enterprise on Windows.
1. You install it using Static IP or not connected to network
2. You install Microsoft Loopback, it is a virtual Network driver and this should be assigned as your primary Network driver instead of your current Network.
So if you don't want any headache, the easiest way is uninstall your Oracle 10g, disable the DHCP and use static instead, then install again. that will work for sure.
Don't try to play with the listener and everything because you will get into deeper and deeper problem that end up into frustration :(
cheers
Edited by: Chubbyd4d on May 19, 2009 12:58 PM
Destination Folder: L:\oraclexe\
Port for 'Oracle Database Listener': 1521
Port for 'Oracle Services for Microsoft Transaction Server': 2030
Port for HTTP Listener: 8081
My friend, I believe you created a mess by Installing Oracle 10g Enterprise with your DHCP enable in Windows.
There are only 2 options if you want to install Oracle 10g Enterprise on Windows.
1. You install it using Static IP or not connected to network
2. You install Microsoft Loopback, it is a virtual Network driver and this should be assigned as your primary Network driver instead of your current Network.
So if you don't want any headache, the easiest way is uninstall your Oracle 10g, disable the DHCP and use static instead, then install again. that will work for sure.
Don't try to play with the listener and everything because you will get into deeper and deeper problem that end up into frustration :(
cheers
Edited by: Chubbyd4d on May 19, 2009 12:58 PM
clean start
================================================================================================================
Output generated from configuration assistant "Oracle Net Configuration Assistant":
Parsing command line arguments:
Parameter "orahome" = N:\oracle10g
Parameter "orahnam" = OraDb10g_home1
Parameter "instype" = typical
Parameter "inscomp" = client,oraclenet,javavm,server,ano
Parameter "insprtcl" = tcp,nmp
Parameter "cfg" = local
Parameter "authadp" = NO_VALUE
Parameter "nodeinfo" = NO_VALUE
Parameter "responsefile" = N:\oracle10g\network\install\netca_typ.rsp
Done parsing command line arguments.
Oracle Net Services Configuration:
Profile configuration complete.
The information provided for this listener is currently in use by other software on this computer.
Listener start failed. Listener may already be running.
Listener configuration complete.
Default local naming configuration complete.
Oracle Net Services configuration successful. The exit code is 0
Configuration assistant "Oracle Net Configuration Assistant" succeeded
================================================================================================================
Output generated from configuration assistant "iSQL*Plus Configuration Assistant":
iSQL*Plus 10.1.0.2.0
Copyright (c) 2004 Oracle. All rights reserved.
Starting iSQL*Plus ...
iSQL*Plus started.
Configuration assistant "iSQL*Plus Configuration Assistant" succeeded
================================================================================================================
Output generated from configuration assistant "Oracle Database Configuration Assistant":
Configuration assistant "Oracle Database Configuration Assistant" failed
================================================================================================================
Output generated from configuration assistant "Oracle Database Configuration Assistant" (attempt 2):
Configuration assistant "Oracle Database Configuration Assistant" failed
================================================================================================================
Output generated from configuration assistant "Oracle Database Configuration Assistant" (attempt 3):
Configuration assistant "Oracle Database Configuration Assistant" failed
install microsoft loop back adapter okay
ip 10.10.1.1
255.255.255.0
still ora 12154
disable dhcp client on services.msc
still ora 12154
pls help
this is a fresh install
do i need to remove my oracle 10xe which is perfect working installed on a different drive
pls help me

Similar Messages

  • 10g installation error... Need help

    I launched the ./runInstaller comman, met all the installer requirements, and then this:...
    [oracle@localhost database]$
    Exception in thread "main" java.lang.InteranalError: Can't connect to X11 window server using 'localhost.localdomain:0.0' as the value of the DISPLAY variable.
    What should the DISPLAY value be, and is that supposed to be set in the environment while user is oracle?
    I used the...
    $ /sbin/ifconfig to find the inet addr:75.4.93.84
    then executed...
    $ DISPLAY=75.4.93.84:0.0 ; export DISPLAY
    What am I missing?
    Thanks.
    Message was edited by:
    user575568

    Hi,
    You can try to as following:
    Run "xhost +" login as root user;
    2,export DISPLAY="127.0.0.1:0.0"
    Regards
    TerryWell I tried that.
    Here's what I did as root:
    [root@adsl-70-131-46-217 ~]$ hostname
    adsl-70-131-46-217.dsl.emhril.sbcglobal.net
    [root@adsl-70-131-46-217 ~]$ xhost + adsl-70-131-46-217.dsl.emhril.sbcglobal.net
    This is what I did as oracle:
    [oracle@adsl-70-131-46-217 ~]$ export DISPLAY="127.0.0.1:0.0"
    This is my error:
    [oracle@adsl-70-131-46-217 ~]$ Exception in thread "main" java.lang.InternalError: Can't connect to X11 window server using '127.0.0.1:0.0' as the value of the DISPLAY variable.
    Then there are a bunch of lines at read 'at sun...[stuff] at java...[more stuff] at oracle...[and more stuff]'
    Any ideas?

  • Error encounded during oracle 10g installation on mac os 10x

    Hi All,
    I am installing oracle 10g on my mac laptop os 10 x, I am getting the below error during execution of dbca script for db creation, I am not able to proceed further, please advice
    [Thread-3] [17:11:23:18] [BasicStep.execute:202] Executing Step : CLONE_DB_CREATION_RMAN_RESTORE
    [Thread-3] [17:11:23:18] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-01092
    [Thread-3] [17:11:23:18] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-01034
    [Thread-3] [17:11:23:18] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-03114
    [Thread-3] [17:11:23:18] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-12560
    [Thread-3] [17:11:23:18] [StepErrorHandler.setIgnorableErrors:250] setting Ignorable Error: ORA-01109
    [Thread-3] [17:11:23:19] [BasicStep.configureSettings:304] messageHandler being set=null
    [Thread-3] [17:11:23:20] [BasicStep.execute:202] Executing Step : INSTANCE_CREATION
    [Thread-3] [17:11:23:20] [BasicStep.configureSettings:304] messageHandler being set=null
    [Thread-3] [17:11:23:25] [InitParamAttributes.sortParams:3532] m_sortOn:-1 sortOn:4
    [Thread-3] [17:11:23:53] [Host.noEntryinOratab:5115] Check made for oratab arg passed............
    [Thread-3] [17:11:23:53] [Oratab.getTempFile:710] Temp oratab: /tmp/oratab
    [Thread-3] [17:11:23:94] [BasicStep.configureSettings:304] messageHandler being set=oracle.sysman.assistants.util.UIMessageHandler@29da77
    [Thread-3] [17:11:23:95] [CloneRmanRestoreStep.executeImpl:217] Instance Creation went fine..........
    [Thread-3] [17:11:23:96] [CloneRmanRestoreStep.executeImpl:224] db_recovery_file_dest=/app/oracle/flash_recovery_area
    [Thread-3] [17:11:23:96] [CloneRmanRestoreStep.executeImpl:227] db_recovery_file_dest_size=2147483648
    [Thread-1] [17:11:24:476] [BasicStep.handleNonIgnorableError:430] oracle.sysman.assistants.util.UIMessageHandler@29da77:messageHandler
    [Thread-1] [17:11:24:476] [BasicStep.handleNonIgnorableError:431] ORA-12547: TNS:lost contact
    :msg
    [Thread-3] [17:11:27:466] [SQLEngine.done:1966] Done called
    oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-12547: TNS:lost contact
         at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1482)
         at oracle.sysman.assistants.util.sqlEngine.SQLEngine.connect(SQLEngine.java:829)
         at oracle.sysman.assistants.dbca.backend.CloneRmanRestoreStep.executeImpl(CloneRmanRestoreStep.java:244)
         at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
         at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
         at oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2488)
         at java.lang.Thread.run(Thread.java:552)
    [Thread-3] [17:11:27:470] [BasicStep.configureSettings:304] messageHandler being set=oracle.sysman.assistants.util.UIMessageHandler@29da77
    [Thread-3] [17:11:27:470] [StepContext$ModeRunner.run:2504] oracle.sysman.assistants.dbca.backend.CloneRmanRestoreStep.executeImpl(CloneRmanRestoreStep.java:435)
    oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
    oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
    oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2488)
    java.lang.Thread.run(Thread.java:552)
    Thanks
    Vijayaprakash

    Duplicate post - Error encounded during oracle 10g installation on mac os 10x
    Srini

  • Oracle 10g rac ora-01092 oracle instance terminated disconnection forced

    hi
    I am getting following error on 2 node RAC (on NFS mount point )
    oracle 10g rac ora-01092 oracle instance terminated disconnection forced
    br
    anuj singh

    Anju,
    Its really very difficult to tell you what exactly went wrong with the limited information given by you. Did you check the alert log and other cluster (crsd and cssd ) logs? If not, I would strongly recommend you to pay attention to these logs for any clue.
    Jaffar

  • Oracle 10g Installation Problem on SUSE Linux 10

    Hello Friends,
    I want to install SAP Solution Manager 7.0 with Oracle 10g on SUSE Linux 10.0.
    But, while starting the Installation i am getting following Errors.
    Starting Oracle Universal Installer...
    Checking installer requirements...
    Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1,
    asianux-2 or SuSE-10
                                          Passed
    All installer requirements met.
    Preparing to launch Oracle Universal Installer from /tmp/OraInstall2009-04-22_03-59-38PM. Please wait ...
    Error in writing to directory /tmp/OraInstall2009-04-22_03-59-38PM. Please ensure that this directory is
    writable and has atleast 60 MB of disk space. Installation cannot continue.
    : Success
    I have checked the Permissions and the Size of /tmp Directory, which is as followed:
    drwxr-xr-x  11 root root    0 2009-04-22 21:19 sys
    drwxrwxrwt  52 root root 1824 2009-04-22 16:00 tmp
    drwxr-xr-x  15 root root  408 2009-04-19 14:43 usr
    Filesystem           1K-blocks      Used Available Use% Mounted on
    /dev/sda10             2104376     73112   2031264   4% /tmp
    I am starting the Oracle 10g Installation within orasm7 User which is a member of dba, users, disk groups.
    The directories which are created upon starting the Oracle Installation in /tmp directory are having the situations as followed:
    drwxr-xr-x 3 orasm7   dba          128 2009-04-21 18:41 OraInstall2009-04-21_06-41-14PM
    drwxr-xr-x 3 orasm7   dba          128 2009-04-21 18:41 OraInstall2009-04-21_06-41-25PM
    drwxr-xr-x 3 orasm7   dba          128 2009-04-22 15:59 OraInstall2009-04-22_03-59-38PM
    The Oracle Installation log is as follwoed:
    Using paramFile: /home/MyData/51031676/database/install/oraparam.ini
    Checking installer requirements...
    Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1, asianux-2 or SuSE-10
                                          Passed
    All installer requirements met.
    The commandline for unzip:
    /home/MyData/51031676/database/install/unzip -qqq ../stage/Components/oracle.swd.jre/1.4.2.0.8
    /1/DataFiles/\*.jar -d /tmp/OraInstall2009-04-22_03-59-38PM
    I have set DISPLAY variable in this way before starting Installation:
    DISPLAY=$HOSTNAME:0.0
    export DISPLAY
    I tried to search the solution over the internet for this kind of problem, but i am not able to find its solution. Even i tried to start the Orale installation using this parameter: ./runInstaller ignoreSysPrereqs, but still it is giving the same unexpected error.
    I have a doubt on File/Directory permissions which are created for Installation in /tmp. The umask setiing of the system is 0022.
    Please, help me for this issue.
    Thanks & Regards,
    Bhavik G. Shroff

    Hi Markus,
    How are you ?
    Thank you very much for your reply.
    I was executing wrong runInstaller file. RUNINSTALLER is right file for starting the execution. But still i am facing the same error, which is as followed.
    Preparing response files. Please wait:
    ======================================
    Working on /home/MyData/51031676/database/SAP/SVRCUSTOM.RSP
    /home/MyData/51031676/database/SAP/SVRCUSTOM.RSP --> /tmp/.orainst_rsp.27450: Done
    Starting Oracle Universal Installer...
    Checking installer requirements...
    Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1, asianux-2 or SuSE-10
                                          Passed
    All installer requirements met.
    Preparing to launch Oracle Universal Installer from /home/orasm7/tmpora/OraInstall2009-04-22_05-25-26PM. Please wait ...
    Error in writing to directory /home/orasm7/tmpora/OraInstall2009-04-22_05-25-26PM. Please ensure that
    this directory is writable and has atleast 60 MB of disk space. Installation cannot continue.
    : Success
    SHROFF:~ # cd /home/orasm7/tmpora/
    SHROFF:/home/orasm7/tmpora # ll
    total 0
    drwxr-xr-x 3 orasm7 dba 128 Apr 22 17:25 OraInstall2009-04-22_05-25-26PM
    SHROFF:/home/orasm7/tmpora # cd OraInstall2009-04-22_05-25-26PM/
    SHROFF:/home/orasm7/tmpora/OraInstall2009-04-22_05-25-26PM # ll
    total 4
    drwxr-xr-x 2 orasm7 dba 304 Apr 22 17:25 images
    -rwxr-xr-x 1 orasm7 dba 504 Apr 22 17:25 installActions2009-04-22_05-25-26PM.log
    SHROFF:/home/orasm7/tmpora/OraInstall2009-04-22_05-25-26PM #
    I have a doubt on tmp_netca_file & tmp_dbca_file variable.
    Please give your suggestion for the same.
    Regards,
    Bhavik G. Shroff
    Edited by: Bhavik G. Shroff on Apr 22, 2009 2:10 PM

  • Oracle 10g installation on Windows 7

    I am currently using Oracle 10g on my laptop running on Windows Vista. Now i am planning to upgrade my OS to Windows 7. My question here, is can I use the same Oracle 10g installable to install in windows 7 also ??
    is it possible ??
    thanks,
    JJ

    Possible yes? Brilliant no!
    Windows 7 is totally uncertified and unsupported with all Oracle products and if you have an issue there is essentially no support or patch available.
    Personally I think Vista a cruel joke so my recommendation would be to go to XP SP3 which at least has the attribute of stability or move to Linux which is what I did on one of my laptops.

  • Oracle 10g installation on aix 52

    Oracle 10g installation is failing on a
    aix52 64bit machine
    After installing the product running
    $ORACLE_HOME/root.sh for setup as user root results
    in the following errors:
    exec(): 0509-036 Cannot load program /dbms/oracle/10g/OraHome/bin/crsctl.bin because of the following errors:
    0509-130 Symbol resolution failed for /dbms/oracle/10g/OraHome/lib/libttsh10.a[shr_ttsh10.o] because:
    0509-136 Symbol aio_nwait_timeout (number 324) is not exported from
    dependent module /unix.
    0509-022 Cannot load module /dbms/oracle/10g/OraHome/lib/libhasgen10.a(shr_hasgen10.o).
    0509-150 Dependent module libttsh10.a(shr_ttsh10.o) could not be loaded.
    0509-026 System error: Cannot run a file that does not have a valid format.
    0509-192 Examine .loader section symbols with the
    'dump -Tv' command.
    exec(): 0509-036 Cannot load program /dbms/oracle/10g/OraHome/bin/clscfg because of the following errors:
    0509-130 Symbol resolution failed for /dbms/oracle/10g/OraHome/lib/libttsh10.a[shr_ttsh10.o] because:
    0509-136 Symbol aio_nwait_timeout (number 324) is not exported from
    dependent module /unix.
    0509-022 Cannot load module /dbms/oracle/10g/OraHome/lib/libhasgen10.a(shr_hasgen10.o).
    0509-150 Dependent module libttsh10.a(shr_ttsh10.o) could not be loaded.
    0509-026 System error: Cannot run a file that does not have a valid format.
    0509-192 Examine .loader section symbols with the
    'dump -Tv' command.
    Failed to initialize Oracle Cluster Registry for cluster
    Any suggenstion on this will be appreciated.

    Would like to see the http://download-west.oracle.com/docs/cd/B19306_01/relnotes.102/b19074/toc.htm#CJAFJGIC or for linux, see http://www.puschitz.com/InstallingOracle10g.shtml.
    Its trustworthy sites and my request is to delete all the files and start clean-installation again.
    Revert back if any clarifications required.
    Regards,
    Star Nirav
    Oracle 10g installation is failing on a
    aix52 64bit machine
    After installing the product running
    $ORACLE_HOME/root.sh for setup as user root results
    in the following errors:
    exec(): 0509-036 Cannot load program
    /dbms/oracle/10g/OraHome/bin/crsctl.bin because of
    the following errors:
    0509-130 Symbol resolution failed for
    /dbms/oracle/10g/OraHome/lib/libttsh10.a[shr_ttsh10.o
    because:
    0509-136 Symbol aio_nwait_timeout (number
    324) is not exported from
    dependent module /unix.
    annot load module
    /dbms/oracle/10g/OraHome/lib/libhasgen10.a(shr_hasgen1
    0.o).
    0509-150 Dependent module
    libttsh10.a(shr_ttsh10.o) could not be loaded.
    0509-026 System error: Cannot run a file that
    does not have a valid format.
    0509-192 Examine .loader section symbols with
    the
    'dump -Tv' command.
    Cannot load program
    /dbms/oracle/10g/OraHome/bin/clscfg because of the
    following errors:
    0509-130 Symbol resolution failed for
    /dbms/oracle/10g/OraHome/lib/libttsh10.a[shr_ttsh10.o
    because:
    0509-136 Symbol aio_nwait_timeout (number
    324) is not exported from
    dependent module /unix.
    annot load module
    /dbms/oracle/10g/OraHome/lib/libhasgen10.a(shr_hasgen1
    0.o).
    0509-150 Dependent module
    libttsh10.a(shr_ttsh10.o) could not be loaded.
    0509-026 System error: Cannot run a file that
    does not have a valid format.
    0509-192 Examine .loader section symbols with
    the
    'dump -Tv' command.
    lize Oracle Cluster Registry for cluster
    Any suggenstion on this will be appreciated.

  • SUNWsprox package with solaris 10 for Oracle 10g Installation....

    Hi
    I am in problem with a Solaris 10 package "SUNWsprox - Sun workshop Bundled 64-bit make library" for Oracle 10g Installation. I checked the CDs (In the /.../products) but did't found this packege. Can any one tell me please can I go without this package or where I found this package...Please Its very URGENT for me....
    Thanks
    Mohammed Tanvir

    Hi...
    I had the same issue, but found out that the SUNWsprox was replaced by SUNWsprot. The OUI 10.1 Release 2 will 'pass' as the doco in the Oracle quick install guide is wrong (as well as 10g Application Server).
    The only way to lay a 10g Release database on Solaris 10 is to lay the software doen only, then cd in the .../bin directory, step your Rdbms ORACLE_HOME, ORACLE_SID, LD_LIBRARY_PATH and of course the DISPLAY (is X-windowing into the server), and run dbca manually. Oracle 10g is a bit buggy.
    Roger

  • OracleAS 10g installation (please Help)

    Hi All
    i want a help in[b] OracleAS 10g installation
    in the first step in it's installation . must install oracleAS infrastracture . in my way to install it many Errors & messages appears to me
    this Errors & messages in 4 pictures to see it .. hope to find a solution for this
    th pictures in this links
    1- http://www.araboug.org/ib/index.php?act=Attach&type=post&id=5413
    2- http://www.araboug.org/ib/index.php?act=Attach&type=post&id=5414
    3- http://www.araboug.org/ib/index.php?act=Attach&type=post&id=5415
    4- http://www.araboug.org/ib/index.php?act=Attach&type=post&id=5416
    after pressing ignor in the forth screen many errors & messages appears to me

    Oracle AS10g = 10.1.2.0.2 I presume...
    However, my first questions is still valid "The questions is if you followed EVERY step outlined in the Application Server Installation Guide? If you did, then there should be no errors."
    I have had similar issues when environment variables was still set during installations, ORACLE_HOME etc. You must unset those, as described in the Installation Guide, before starting an installations.
    Please check these two Metalink Notes:
    295446.1 "OracleCSService service may fail to start during the install of IAS 10.1.2 on Windows"
    365046.1 "The Infrastructure DBCA Stops with Error "Failed to initialize OCR"
    Regards,
    Martin

  • Is Oracle AS part of Oracle 10g installation?

    I had a query that is Oracle application server a part of Oracle 10g installation? I get this doubt because isqlplus which runs on port 5560 by default has a web interface.
    I hope, my question is clear.
    Please revert with the reply to my query.
    Regards

    972145 wrote:
    I had a query that is Oracle application server a part of Oracle 10g installation? I get this doubt because isqlplus which runs on port 5560 by default has a web interface.
    I hope, my question is clear.
    Please revert with the reply to my query.
    Regardsno Oracle Application Server is NOT included with DB installation

  • I really need help. I try to contact support to no avail. There simply is no option on the site, You are always referred to a further topic which has notihing to do with my problem. I bougnt a full master pack CS6 which I had installed on a mac for one ye

    I really need help. I try to contact support to no avail. There simply is no option on the site, You are always referred to a further topic which has notihing to do with my problem. I bougnt a full master pack CS6 which I had installed on a mac for one year. Then, I decided to change it to another computer, so I sisintalled it according to instructions. In the meantime I got a free trial of creative cloud on that computer, but I gave up and decided to reinstall my cd-roms. However, everytime I try to use acrobat for instance it says that my trial period ran out! I disinstalled my cloud products, I am using my registered full master series items, they have nothing whatsoever to do with my creative cloud FREE subscription. If I try to cancel my free membership, it is to no avail, there simply is no such possiblity. I want to use the software I paid dearly for, not the cloud items I disinstalled and which do not interest me. How can I contact Adobe to fix it? It was no fault of mine, I did all I was supposed to, disintalling items before installing the right ones, but the system must have some error i am not responsible for.

    open an app and click help>activate.
    if you try to open an app and see a 'your trial has expired" window, click license this software and enter your serial number.
    if you can't do either, run the cleaner and make sure cc is cleaned from your computer, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

  • Error in deploying my spring web app, really need help?!

    I am using eclipe 3.3.0 and tomcat 5.5.23, spring 2.0.6
    And I get this error while deploying.
    Can anyone tell me where it is comming from and what i should do to fix it?
    If you need any more info please ask that too, I really need help..
    I have browsed all over the internet, but found nothing really helpful..
    In my browser I get a Http status 500 error:
    exception
    javax.servlet.ServletException: Servlet.init() for servlet jsp threw exception
         org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)
         org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:151)
         org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:870)
         org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:665)
         org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:528)
         org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:81)
         org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:685)
         java.lang.Thread.run(Unknown Source)
    root cause
    java.lang.NoClassDefFoundError: javax/servlet/jsp/JspFactory
         org.apache.jasper.servlet.JspServlet.init(JspServlet.java:100)
         org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)
         org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:151)
         org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:870)
         org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:665)
         org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:528)
         org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:81)
         org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:685)
         java.lang.Thread.run(Unknown Source)
    And this is what I see in the console:
    10-sep-2007 14:16:11 org.apache.catalina.core.AprLifecycleListener lifecycleEvent
    INFO: The Apache Tomcat Native library which allows optimal performance in production environments was not found on the java.library.path: C:\Program Files\Java\jre1.5.0_12\bin;.;C:\WINDOWS\system32;C:\WINDOWS;C:\Program Files\Java\jre1.6.0_02\bin\client;C:\Program Files\Java\jre1.6.0_02\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\maven\maven-2.0.7\bin;C:\Program Files\Common Files\Adobe\AGL;C:\Program Files\QuickTime\QTSystem\;C:\Java\SDK\bin;C:\maven\maven-2.0.7\bin;C:\apache-ant-1.7.0\bin;C:\spring-framework-2.0.6
    10-sep-2007 14:16:11 org.apache.coyote.http11.Http11BaseProtocol init
    INFO: Initializing Coyote HTTP/1.1 on http-8090
    10-sep-2007 14:16:11 org.apache.catalina.startup.Catalina load
    INFO: Initialization processed in 4312 ms
    10-sep-2007 14:16:12 org.apache.catalina.core.StandardService start
    INFO: Starting service Catalina
    10-sep-2007 14:16:12 org.apache.catalina.core.StandardEngine start
    INFO: Starting Servlet Engine: Apache Tomcat/5.5.23
    10-sep-2007 14:16:12 org.apache.catalina.core.StandardHost start
    INFO: XML validation disabled
    log4j:WARN No appenders could be found for logger (org.apache.catalina.startup.TldConfig).
    log4j:WARN Please initialize the log4j system properly.
    10-sep-2007 14:16:14 org.apache.commons.modeler.Registry registerComponent
    SEVERE: Null component Catalina:type=JspMonitor,name=jsp,WebModule=//localhost/SpringBikeApp,J2EEApplication=none,J2EEServer=none
    10-sep-2007 14:16:14 org.apache.catalina.core.ApplicationContext log
    SEVERE: StandardWrapper.Throwable
    java.lang.NoClassDefFoundError: javax/servlet/jsp/JspFactory
         at org.apache.jasper.servlet.JspServlet.init(JspServlet.java:100)
         at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1139)
         at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:966)
         at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:3956)
         at org.apache.catalina.core.StandardContext.start(StandardContext.java:4230)
         at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1014)
         at org.apache.catalina.core.StandardHost.start(StandardHost.java:736)
         at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1014)
         at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:443)
         at org.apache.catalina.core.StandardService.start(StandardService.java:448)
         at org.apache.catalina.core.StandardServer.start(StandardServer.java:700)
         at org.apache.catalina.startup.Catalina.start(Catalina.java:552)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
         at java.lang.reflect.Method.invoke(Unknown Source)
         at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:295)
         at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:433)
    10-sep-2007 14:16:14 org.apache.catalina.core.StandardContext loadOnStartup
    SEVERE: Servlet /SCWCD threw load() exception
    java.lang.NoClassDefFoundError: javax/servlet/jsp/JspFactory
         at org.apache.jasper.servlet.JspServlet.init(JspServlet.java:100)
         at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1139)
         at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:966)
         at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:3956)
         at org.apache.catalina.core.StandardContext.start(StandardContext.java:4230)
         at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1014)
         at org.apache.catalina.core.StandardHost.start(StandardHost.java:736)
         at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1014)
         at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:443)
         at org.apache.catalina.core.StandardService.start(StandardService.java:448)
         at org.apache.catalina.core.StandardServer.start(StandardServer.java:700)
         at org.apache.catalina.startup.Catalina.start(Catalina.java:552)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
         at java.lang.reflect.Method.invoke(Unknown Source)
         at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:295)
         at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:433)
    10-sep-2007 14:16:14 org.apache.commons.modeler.Registry registerComponent
    SEVERE: Null component Catalina:type=JspMonitor,name=jsp,WebModule=//localhost/SCWCD,J2EEApplication=none,J2EEServer=none
    10-sep-2007 14:16:14 org.apache.catalina.core.ApplicationContext log
    SEVERE: StandardWrapper.Throwable
    java.lang.NoClassDefFoundError: javax/servlet/jsp/JspFactory
         at org.apache.jasper.servlet.JspServlet.init(JspServlet.java:100)
         at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1139)
         at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:966)
         at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:3956)
         at org.apache.catalina.core.StandardContext.start(StandardContext.java:4230)
         at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1014)
         at org.apache.catalina.core.StandardHost.start(StandardHost.java:736)
         at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1014)
         at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:443)
         at org.apache.catalina.core.StandardService.start(StandardService.java:448)
         at org.apache.catalina.core.StandardServer.start(StandardServer.java:700)
         at org.apache.catalina.startup.Catalina.start(Catalina.java:552)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
         at java.lang.reflect.Method.invoke(Unknown Source)
         at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:295)
         at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:433)
    10-sep-2007 14:16:14 org.apache.catalina.core.StandardContext loadOnStartup
    SEVERE: Servlet threw load() exception
    java.lang.NoClassDefFoundError: javax/servlet/jsp/JspFactory
         at org.apache.jasper.servlet.JspServlet.init(JspServlet.java:100)
         at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1139)
         at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:966)
         at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:3956)
         at org.apache.catalina.core.StandardContext.start(StandardContext.java:4230)
         at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1014)
         at org.apache.catalina.core.StandardHost.start(StandardHost.java:736)
         at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1014)
         at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:443)
         at org.apache.catalina.core.StandardService.start(StandardService.java:448)
         at org.apache.catalina.core.StandardServer.start(StandardServer.java:700)
         at org.apache.catalina.startup.Catalina.start(Catalina.java:552)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
         at java.lang.reflect.Method.invoke(Unknown Source)
         at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:295)
         at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:433)
    10-sep-2007 14:16:14 org.apache.commons.modeler.Registry registerComponent
    SEVERE: Null component Catalina:type=JspMonitor,name=jsp,WebModule=//localhost/,J2EEApplication=none,J2EEServer=none
    10-sep-2007 14:16:14 org.apache.coyote.http11.Http11BaseProtocol start
    INFO: Starting Coyote HTTP/1.1 on http-8090
    10-sep-2007 14:16:15 org.apache.jk.common.ChannelSocket init
    INFO: JK: ajp13 listening on /0.0.0.0:8009
    10-sep-2007 14:16:15 org.apache.jk.server.JkMain start
    INFO: Jk running ID=0 time=0/187 config=null
    10-sep-2007 14:16:15 org.apache.catalina.storeconfig.StoreLoader load
    INFO: Find registry server-registry.xml at classpath resource
    10-sep-2007 14:16:15 org.apache.catalina.startup.Catalina start
    INFO: Server startup in 3578 ms
    Many Thanks in advance for any help!!
    Grz Barbera

    hi istvan,
    we are also migrating from websphere to netweaver.
    But in spring framework we r facing problems.
    We hav spring-beans.jar file in lib dir of Web Application. But When we are creating BeanFactory from xml as,
    BeanFactory beanFactory = new ClassPathXmlApplicationContext ("client-config.xml");
    clent-config.xml file contains :
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE beans PUBLIC "-//SPRING//DTD BEAN//EN" "http://www.springframework.org/dtd/spring-beans.dtd">
    <beans>
         <bean id="propertyConfigurer" class="org.springframework.beans.factory.config.PropertyPlaceholderConfigurer" >
              <property name="location">
                   <value>conf/service-client/client.properties</value>
              </property>
         </bean></beans>
    But code is giving exception: ClassNotFoundException -org.springframework.beans.factory.config.PropertyPlaceholderConfigurer.
    Wat is the problem ?
    Kindly help.
    We are also using JAAS for authentication.We are refering above code from our LoginModules login() method.
    Regards,
    sagar.

  • Hello, i really need help. I had just updated my iphone 3gs to 6.0.1, and after I updated, it won't activate.

    Hello, i really need help. I had just updated my iphone 3gs to i.o.s. 6.0.1, and after I updated, it won't activate.I tried it in itunes and it always says " We cannot activate your iphone at this time..." and when I activate using Wi-Fi, it says, "Your iPhone cannot be activated because the activation server is temporarily unavailable." I could swear that my Wi-Fi is fine, and my Itunes is on the latest version.  Is this a bad thing or does this normally occurs? Can I still fix this ? I'm so desperate to use my iphone cause I use it everyday for personal purposes. I sure would appreciate any tip or help . PLSSSS ! Thank you for that wonderful being that can help.

    Do not take it to a third party repair shop - downgrading causes problems and voids your warranty.
    I had to unlock it so that i could really use it as a phone.
    And that is the root of the problem. Unless you had your carrier unlock it, it was hacked and cannot be legitimately activated. Even if you don't care about warranty or problems, downgrading simply will not help an activation issue.

  • I have an iPod Nano 7th generation, and I keep getting an error saying that iTunes could not recognize my device. I have tried nearly everything,except I don't have admin rights on the computer, and really need help.

    I've tried a lot to get it to work, even using a new charger and putting it into Disk Mode. I really need help. Can anyone give me some advice? Thanks.

    Hi Dawson777,
    Thanks for visiting Apple Support Communities.
    It sounds like you're receiving the message "An iPod has been detected, but it could not be identified properly" when you connect your iPod nano to your PC. You have tried some good troubleshooting steps already, and you may want to review the additional steps in this article:
    iPod nano: Error message saying that iPod 'could not be identified properly'
    http://support.apple.com/kb/ts3218
    Best Regards,
    Jeremy

  • In testing 9 and X, "Compare Docs" we have a critical issue and really need help!

    For years we have used Acrobat 7 to do PDF compares and we love it!  However, the company recently advised we must upgrade to 9 and then eventually to X.  In testing 9 and X, Compare Docs we have a critical issue and really need help.  Our PDFs are produced by IT in a batch process and one of our main, critical functions is to compare previous PDFs to current PDFs;  however, in using 9 the Compare screen automatically sets the Doc Description for our PDFs to "Scanned Doc" and does not produce any differences! If you try to change the setting to Reports --it totally shuts down both documents without running!  Version 7 runs the compare of the same PDFs  beautifully, pointing out all the differences, as usual!  Has this every happen to anyone?  Do you know what we can do to our PDFs to allow version 9 to do the compare and produce results?  Why is 9 treating these non-scanned PDF docs as such?  Thanks so much for any help or insight you can give me on this issue! 

    (Moved the discussion to the correct forum)

Maybe you are looking for

  • Adobe Premiere Pro and After Effects CS5.5 Lagging Horribly with Dynamic Link

    I just bought a brand new computer. It is a beast Windows 7 64-bit Intel i7-980 6 cores with HT = 12 CPU cores Nvidia GTX 570HD 1280mb 328 bit 120gb SSD sata 3 600 gb Velociraptor drive 10000rpm 8gb DDR3 1866MHZ ram So you would think I would get no

  • Error while creating task list

    Hi All, I am configuring change management , i have created project and assigned logical component for that when i create task list it gives below error . For object /TMWFLOW/M , number range interval 01 does not exist Message no. NR751 Diagnosis The

  • MBA no longer reads the external drive - can anyone help?

    Hi My MBA no longer reads the external iOmega HD. I use the iOmega to store all my files and for the TimeMachine. My old Powerbook G4 continues can read it so it's not a problem with the external drive. Also, the MBA can read another external drive t

  • Mail Problem - copying every email I send to inbox

    I am using mail to access and send mail through my gmail account.  For some reason, the other day, I started seeing copies of every email I replied to showing up in my inbox. Actually, it's my "All Mail" box because I've never found an "Inbox" on the

  • Loud rattling sound from the back of my MacBook?

    It doesn't sound healthy... I don't remember what it sounded like before this sound started - But that just proves that I haven't had this sound since I bought it. It's like a constant rattle (quiet) like something's loose... And then there's a quiet