Oracle 10g installation questions

Hi,
I tried to install Oracle 10g (Enterprise Edition) on Windows 2000 server, and encountered the following error when I used the Database Upgrade Assistance to ugrade one of my existing Oracle 8 database TEST.
ORA-01658: Unable to create INITIAL extent for segment in tablespace USERS.
I searched the forum, and seems that there is not enough space for my USERS tablespace. Is it the right solution?
If I clicked Ignore for the above erro, another error appeared:
ORA-00942: table or view does not exist.
I don't have table or view in TEST database, it is just a database instance created by Oracle 8. Do I have to create tables or views in order to upgrade it to Oracle 10g database?
I tried to upgrade an existing Oracle 8 database TEST1 which has data in it, and got the following error:
ORA-01119: error in creating database file D:\oracle\oradata\test1\sysaux01.dbf.
ORA-27044: unable to write the header block of file.
One last question is that after the failing of the DBUCA, I was told that the 10g was successfully installed on my server while no orcl database was created even if I chose
to create a database orcl during my installation.
The following are services running for 10g after the installation.
OracleCSService Started
OracleOraDb10g_home1iSQL*Plus Started
OracleOraDb10g_home1SNMPPeerEncapsulator
OracleOraDb10g_home1SNMPPeerMasterAgent
OracleOraDb10g_home1TNSListenerLISTENER10 Started
Anybody has any idea what went wrong?
Your early reply is greatly appreciated.
Jane

I believe the answers are:
1. the Oracle client needs to be the same bits as the TimesTen server. i.e. if you have 64b TimesTen, then you will need 64b Oracle client. If you have 32b TimesTen then you will need 32b Oracle client.
2. Yes. I believe you can install 64b TimesTen with 64b Oracle client and connect this to a 32b Oracle server. I dont have any idea about performance overhead of this configuration.

Similar Messages

  • Oracle 10g installation on Windows 7

    I am currently using Oracle 10g on my laptop running on Windows Vista. Now i am planning to upgrade my OS to Windows 7. My question here, is can I use the same Oracle 10g installable to install in windows 7 also ??
    is it possible ??
    thanks,
    JJ

    Possible yes? Brilliant no!
    Windows 7 is totally uncertified and unsupported with all Oracle products and if you have an issue there is essentially no support or patch available.
    Personally I think Vista a cruel joke so my recommendation would be to go to XP SP3 which at least has the attribute of stability or move to Linux which is what I did on one of my laptops.

  • OracleAS 10g installation (please Help)

    Hi All
    i want a help in[b] OracleAS 10g installation
    in the first step in it's installation . must install oracleAS infrastracture . in my way to install it many Errors & messages appears to me
    this Errors & messages in 4 pictures to see it .. hope to find a solution for this
    th pictures in this links
    1- http://www.araboug.org/ib/index.php?act=Attach&type=post&id=5413
    2- http://www.araboug.org/ib/index.php?act=Attach&type=post&id=5414
    3- http://www.araboug.org/ib/index.php?act=Attach&type=post&id=5415
    4- http://www.araboug.org/ib/index.php?act=Attach&type=post&id=5416
    after pressing ignor in the forth screen many errors & messages appears to me

    Oracle AS10g = 10.1.2.0.2 I presume...
    However, my first questions is still valid "The questions is if you followed EVERY step outlined in the Application Server Installation Guide? If you did, then there should be no errors."
    I have had similar issues when environment variables was still set during installations, ORACLE_HOME etc. You must unset those, as described in the Installation Guide, before starting an installations.
    Please check these two Metalink Notes:
    295446.1 "OracleCSService service may fail to start during the install of IAS 10.1.2 on Windows"
    365046.1 "The Infrastructure DBCA Stops with Error "Failed to initialize OCR"
    Regards,
    Martin

  • Is Oracle AS part of Oracle 10g installation?

    I had a query that is Oracle application server a part of Oracle 10g installation? I get this doubt because isqlplus which runs on port 5560 by default has a web interface.
    I hope, my question is clear.
    Please revert with the reply to my query.
    Regards

    972145 wrote:
    I had a query that is Oracle application server a part of Oracle 10g installation? I get this doubt because isqlplus which runs on port 5560 by default has a web interface.
    I hope, my question is clear.
    Please revert with the reply to my query.
    Regardsno Oracle Application Server is NOT included with DB installation

  • Oracle 10g Installation Problem on SUSE Linux 10

    Hello Friends,
    I want to install SAP Solution Manager 7.0 with Oracle 10g on SUSE Linux 10.0.
    But, while starting the Installation i am getting following Errors.
    Starting Oracle Universal Installer...
    Checking installer requirements...
    Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1,
    asianux-2 or SuSE-10
                                          Passed
    All installer requirements met.
    Preparing to launch Oracle Universal Installer from /tmp/OraInstall2009-04-22_03-59-38PM. Please wait ...
    Error in writing to directory /tmp/OraInstall2009-04-22_03-59-38PM. Please ensure that this directory is
    writable and has atleast 60 MB of disk space. Installation cannot continue.
    : Success
    I have checked the Permissions and the Size of /tmp Directory, which is as followed:
    drwxr-xr-x  11 root root    0 2009-04-22 21:19 sys
    drwxrwxrwt  52 root root 1824 2009-04-22 16:00 tmp
    drwxr-xr-x  15 root root  408 2009-04-19 14:43 usr
    Filesystem           1K-blocks      Used Available Use% Mounted on
    /dev/sda10             2104376     73112   2031264   4% /tmp
    I am starting the Oracle 10g Installation within orasm7 User which is a member of dba, users, disk groups.
    The directories which are created upon starting the Oracle Installation in /tmp directory are having the situations as followed:
    drwxr-xr-x 3 orasm7   dba          128 2009-04-21 18:41 OraInstall2009-04-21_06-41-14PM
    drwxr-xr-x 3 orasm7   dba          128 2009-04-21 18:41 OraInstall2009-04-21_06-41-25PM
    drwxr-xr-x 3 orasm7   dba          128 2009-04-22 15:59 OraInstall2009-04-22_03-59-38PM
    The Oracle Installation log is as follwoed:
    Using paramFile: /home/MyData/51031676/database/install/oraparam.ini
    Checking installer requirements...
    Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1, asianux-2 or SuSE-10
                                          Passed
    All installer requirements met.
    The commandline for unzip:
    /home/MyData/51031676/database/install/unzip -qqq ../stage/Components/oracle.swd.jre/1.4.2.0.8
    /1/DataFiles/\*.jar -d /tmp/OraInstall2009-04-22_03-59-38PM
    I have set DISPLAY variable in this way before starting Installation:
    DISPLAY=$HOSTNAME:0.0
    export DISPLAY
    I tried to search the solution over the internet for this kind of problem, but i am not able to find its solution. Even i tried to start the Orale installation using this parameter: ./runInstaller ignoreSysPrereqs, but still it is giving the same unexpected error.
    I have a doubt on File/Directory permissions which are created for Installation in /tmp. The umask setiing of the system is 0022.
    Please, help me for this issue.
    Thanks & Regards,
    Bhavik G. Shroff

    Hi Markus,
    How are you ?
    Thank you very much for your reply.
    I was executing wrong runInstaller file. RUNINSTALLER is right file for starting the execution. But still i am facing the same error, which is as followed.
    Preparing response files. Please wait:
    ======================================
    Working on /home/MyData/51031676/database/SAP/SVRCUSTOM.RSP
    /home/MyData/51031676/database/SAP/SVRCUSTOM.RSP --> /tmp/.orainst_rsp.27450: Done
    Starting Oracle Universal Installer...
    Checking installer requirements...
    Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1, asianux-2 or SuSE-10
                                          Passed
    All installer requirements met.
    Preparing to launch Oracle Universal Installer from /home/orasm7/tmpora/OraInstall2009-04-22_05-25-26PM. Please wait ...
    Error in writing to directory /home/orasm7/tmpora/OraInstall2009-04-22_05-25-26PM. Please ensure that
    this directory is writable and has atleast 60 MB of disk space. Installation cannot continue.
    : Success
    SHROFF:~ # cd /home/orasm7/tmpora/
    SHROFF:/home/orasm7/tmpora # ll
    total 0
    drwxr-xr-x 3 orasm7 dba 128 Apr 22 17:25 OraInstall2009-04-22_05-25-26PM
    SHROFF:/home/orasm7/tmpora # cd OraInstall2009-04-22_05-25-26PM/
    SHROFF:/home/orasm7/tmpora/OraInstall2009-04-22_05-25-26PM # ll
    total 4
    drwxr-xr-x 2 orasm7 dba 304 Apr 22 17:25 images
    -rwxr-xr-x 1 orasm7 dba 504 Apr 22 17:25 installActions2009-04-22_05-25-26PM.log
    SHROFF:/home/orasm7/tmpora/OraInstall2009-04-22_05-25-26PM #
    I have a doubt on tmp_netca_file & tmp_dbca_file variable.
    Please give your suggestion for the same.
    Regards,
    Bhavik G. Shroff
    Edited by: Bhavik G. Shroff on Apr 22, 2009 2:10 PM

  • Oracle 10g installation on aix 52

    Oracle 10g installation is failing on a
    aix52 64bit machine
    After installing the product running
    $ORACLE_HOME/root.sh for setup as user root results
    in the following errors:
    exec(): 0509-036 Cannot load program /dbms/oracle/10g/OraHome/bin/crsctl.bin because of the following errors:
    0509-130 Symbol resolution failed for /dbms/oracle/10g/OraHome/lib/libttsh10.a[shr_ttsh10.o] because:
    0509-136 Symbol aio_nwait_timeout (number 324) is not exported from
    dependent module /unix.
    0509-022 Cannot load module /dbms/oracle/10g/OraHome/lib/libhasgen10.a(shr_hasgen10.o).
    0509-150 Dependent module libttsh10.a(shr_ttsh10.o) could not be loaded.
    0509-026 System error: Cannot run a file that does not have a valid format.
    0509-192 Examine .loader section symbols with the
    'dump -Tv' command.
    exec(): 0509-036 Cannot load program /dbms/oracle/10g/OraHome/bin/clscfg because of the following errors:
    0509-130 Symbol resolution failed for /dbms/oracle/10g/OraHome/lib/libttsh10.a[shr_ttsh10.o] because:
    0509-136 Symbol aio_nwait_timeout (number 324) is not exported from
    dependent module /unix.
    0509-022 Cannot load module /dbms/oracle/10g/OraHome/lib/libhasgen10.a(shr_hasgen10.o).
    0509-150 Dependent module libttsh10.a(shr_ttsh10.o) could not be loaded.
    0509-026 System error: Cannot run a file that does not have a valid format.
    0509-192 Examine .loader section symbols with the
    'dump -Tv' command.
    Failed to initialize Oracle Cluster Registry for cluster
    Any suggenstion on this will be appreciated.

    Would like to see the http://download-west.oracle.com/docs/cd/B19306_01/relnotes.102/b19074/toc.htm#CJAFJGIC or for linux, see http://www.puschitz.com/InstallingOracle10g.shtml.
    Its trustworthy sites and my request is to delete all the files and start clean-installation again.
    Revert back if any clarifications required.
    Regards,
    Star Nirav
    Oracle 10g installation is failing on a
    aix52 64bit machine
    After installing the product running
    $ORACLE_HOME/root.sh for setup as user root results
    in the following errors:
    exec(): 0509-036 Cannot load program
    /dbms/oracle/10g/OraHome/bin/crsctl.bin because of
    the following errors:
    0509-130 Symbol resolution failed for
    /dbms/oracle/10g/OraHome/lib/libttsh10.a[shr_ttsh10.o
    because:
    0509-136 Symbol aio_nwait_timeout (number
    324) is not exported from
    dependent module /unix.
    annot load module
    /dbms/oracle/10g/OraHome/lib/libhasgen10.a(shr_hasgen1
    0.o).
    0509-150 Dependent module
    libttsh10.a(shr_ttsh10.o) could not be loaded.
    0509-026 System error: Cannot run a file that
    does not have a valid format.
    0509-192 Examine .loader section symbols with
    the
    'dump -Tv' command.
    Cannot load program
    /dbms/oracle/10g/OraHome/bin/clscfg because of the
    following errors:
    0509-130 Symbol resolution failed for
    /dbms/oracle/10g/OraHome/lib/libttsh10.a[shr_ttsh10.o
    because:
    0509-136 Symbol aio_nwait_timeout (number
    324) is not exported from
    dependent module /unix.
    annot load module
    /dbms/oracle/10g/OraHome/lib/libhasgen10.a(shr_hasgen1
    0.o).
    0509-150 Dependent module
    libttsh10.a(shr_ttsh10.o) could not be loaded.
    0509-026 System error: Cannot run a file that
    does not have a valid format.
    0509-192 Examine .loader section symbols with
    the
    'dump -Tv' command.
    lize Oracle Cluster Registry for cluster
    Any suggenstion on this will be appreciated.

  • SUNWsprox package with solaris 10 for Oracle 10g Installation....

    Hi
    I am in problem with a Solaris 10 package "SUNWsprox - Sun workshop Bundled 64-bit make library" for Oracle 10g Installation. I checked the CDs (In the /.../products) but did't found this packege. Can any one tell me please can I go without this package or where I found this package...Please Its very URGENT for me....
    Thanks
    Mohammed Tanvir

    Hi...
    I had the same issue, but found out that the SUNWsprox was replaced by SUNWsprot. The OUI 10.1 Release 2 will 'pass' as the doco in the Oracle quick install guide is wrong (as well as 10g Application Server).
    The only way to lay a 10g Release database on Solaris 10 is to lay the software doen only, then cd in the .../bin directory, step your Rdbms ORACLE_HOME, ORACLE_SID, LD_LIBRARY_PATH and of course the DISPLAY (is X-windowing into the server), and run dbca manually. Oracle 10g is a bit buggy.
    Roger

  • Error encounded during oracle 10g installation on mac os 10x

    Hi All,
    I am installing oracle 10g on my mac laptop os 10 x, I am getting the below error during execution of dbca script for db creation, I am not able to proceed further, please advice
    [Thread-3] [17:11:23:18] [BasicStep.execute:202] Executing Step : CLONE_DB_CREATION_RMAN_RESTORE
    [Thread-3] [17:11:23:18] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-01092
    [Thread-3] [17:11:23:18] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-01034
    [Thread-3] [17:11:23:18] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-03114
    [Thread-3] [17:11:23:18] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-12560
    [Thread-3] [17:11:23:18] [StepErrorHandler.setIgnorableErrors:250] setting Ignorable Error: ORA-01109
    [Thread-3] [17:11:23:19] [BasicStep.configureSettings:304] messageHandler being set=null
    [Thread-3] [17:11:23:20] [BasicStep.execute:202] Executing Step : INSTANCE_CREATION
    [Thread-3] [17:11:23:20] [BasicStep.configureSettings:304] messageHandler being set=null
    [Thread-3] [17:11:23:25] [InitParamAttributes.sortParams:3532] m_sortOn:-1 sortOn:4
    [Thread-3] [17:11:23:53] [Host.noEntryinOratab:5115] Check made for oratab arg passed............
    [Thread-3] [17:11:23:53] [Oratab.getTempFile:710] Temp oratab: /tmp/oratab
    [Thread-3] [17:11:23:94] [BasicStep.configureSettings:304] messageHandler being set=oracle.sysman.assistants.util.UIMessageHandler@29da77
    [Thread-3] [17:11:23:95] [CloneRmanRestoreStep.executeImpl:217] Instance Creation went fine..........
    [Thread-3] [17:11:23:96] [CloneRmanRestoreStep.executeImpl:224] db_recovery_file_dest=/app/oracle/flash_recovery_area
    [Thread-3] [17:11:23:96] [CloneRmanRestoreStep.executeImpl:227] db_recovery_file_dest_size=2147483648
    [Thread-1] [17:11:24:476] [BasicStep.handleNonIgnorableError:430] oracle.sysman.assistants.util.UIMessageHandler@29da77:messageHandler
    [Thread-1] [17:11:24:476] [BasicStep.handleNonIgnorableError:431] ORA-12547: TNS:lost contact
    :msg
    [Thread-3] [17:11:27:466] [SQLEngine.done:1966] Done called
    oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-12547: TNS:lost contact
         at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1482)
         at oracle.sysman.assistants.util.sqlEngine.SQLEngine.connect(SQLEngine.java:829)
         at oracle.sysman.assistants.dbca.backend.CloneRmanRestoreStep.executeImpl(CloneRmanRestoreStep.java:244)
         at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
         at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
         at oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2488)
         at java.lang.Thread.run(Thread.java:552)
    [Thread-3] [17:11:27:470] [BasicStep.configureSettings:304] messageHandler being set=oracle.sysman.assistants.util.UIMessageHandler@29da77
    [Thread-3] [17:11:27:470] [StepContext$ModeRunner.run:2504] oracle.sysman.assistants.dbca.backend.CloneRmanRestoreStep.executeImpl(CloneRmanRestoreStep.java:435)
    oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
    oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
    oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2488)
    java.lang.Thread.run(Thread.java:552)
    Thanks
    Vijayaprakash

    Duplicate post - Error encounded during oracle 10g installation on mac os 10x
    Srini

  • OracleAS 10g Installation Problem on RedHat AS 3.0

    Hi
    I need to install OracleAS 10g on RedHat AS 3.0 and it seems that I need a patch (Patch 3006854) and the installation is impossible without it.I just started using oracleAS 10g and I dont have any metalink id.
    I think something is wrong here.
    a free trial version with a commercial patch !!!
    can any one please help me out.
    regards yashar

    dear fredrik
    I tried to install it according to the installation guid on http://www.oracle-base.com/articles/10g/OracleAS10gInstallationOnRedHatAS3.php as you see it asked for installation of a patch.
    and yes I tried to install it without installing this patch and I got an error saying that I am missing a file named ld.so in /etc.I thought it might be connected to that patch.
    beside when I was looking for the solution to my problem I saw many people having the same problem and asking the exact same question.
    please notify about any solution that you think might help me solving this problem. I am in a hurry
    regards yashar

  • Oracle 10g Installer Hangs at 87%

    I am trying to install Oracle 10g on a HPUX Itanium box and the installer hangs every time at 87%, which is right after specifying schema passwords. I can see the java process still running but it is only taking 0.23% of a processor.
    Task Being Performed: "Processing iSQL*Plus 10.1.0.2.0"
    Tail of installActions log:
    Calling Query generalPortQueries2.1.0.18.7 getFreePort
    lowerPortNumber = 5580
    upperPortNumber = 5599
    currentOracleHome = /oracle/OraHome
    portName = iSqlplus RMI Port
    oracleHomes = null
    configurationPath = null
    attributeName = null
    UDPFlag = null
    Contents of oraInstall*.err (although the file date is 2 minutes earlier than installActions log):
    java.net.UnknownHostException: breezedb.domain.com: breezedb.domain.com
    at java.net.InetAddress.getLocalHost(InetAddress.java:1139)
    at oracle.sysman.oii.oiin.OiinNetOps.computeNICList(OiinNetOps.java:104)
    at oracle.sysman.oii.oiin.OiinNetOps.<init>(OiinNetOps.java:75)
    at oracle.sysman.oii.oiin.OiinNetOps.getNetOps(OiinNetOps.java:89)
    at oracle.sysman.oii.oiif.oiifw.OiifwHostNameWCDE.initialize(OiifwHostNameWCDE.java:105)
    at oracle.sysman.oii.oiif.oiifb.OiifbCondIterator.iterate(OiifbCondIterator.java:146)
    at oracle.sysman.oii.oiic.OiicDepWizEngine.doOperation(OiicDepWizEngine.java:358)
    at oracle.sysman.oii.oiif.oiifb.OiifbCondIterator.iterate(OiifbCondIterator.java:162)
    at oracle.sysman.oii.oiic.OiicPullSession.doOperation(OiicPullSession.java:915)
    at oracle.sysman.oii.oiic.OiicSessionWrapper.doOperation(OiicSessionWrapper.java:230)
    at oracle.sysman.oii.oiic.OiicInstaller.run(OiicInstaller.java:399)
    at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:717)
    at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:628)
    Contents of oraInstall*.out
    null
    null
    Does anyone know what might be causing this? I have been having a hard time getting anything from Oracle installed on this Itanium machine and am wondering if Oracle really supports it.
    Thanks for any help.

    Jeff,
    You should post your database technical questions in the database forum for an appropriate response: General Database Discussions
    Thanks,
    OTN

  • Oracle 10g installation on linux using virtual box.

    Hi,
    Iam trying to install oracle 10g on enterprise linux using virtual box.I downloaded oracle 10g for linux and while running the installer,Iam getting this error
    Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2010-04-16_07-29-46AM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
    at java.lang.ClassLoader$NativeLibrary.load(Native Method)
    at java.lang.ClassLoader.loadLibrary0(Unknown Source)
    at java.lang.ClassLoader.loadLibrary(Unknown Source)
    at java.lang.Runtime.loadLibrary0(Unknown Source)
    at java.lang.System.loadLibrary(Unknown Source)
    at sun.security.action.LoadLibraryAction.run(Unknown Source)
    at java.security.AccessController.doPrivileged(Native Method)
    at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
    at sun.awt.DebugHelper.<clinit>(Unknown Source)
    at java.awt.Component.<clinit>(Unknown Source)
    Please help me to solve this

    user9362721 wrote:
    Hi,
    Iam trying to install oracle 10g on enterprise linux using virtual box.I downloaded oracle 10g for linux and while running the installer,Iam getting this error
    Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2010-04-16_07-29-46AM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directoryHi.
    This question was answered in this forum yesterday. And the day before. And the day before that. And ... (Or at least it feels like we get this every day, and sometimes several times a day.)
    Search for 'xhost'

  • Oracle 10g installation guidance

    hi every body
    i am a newbie and a student.
    i have EBS 12R installed over my laptop - win Xp platform.
    now i want to install oracle 10 over linux platform ...
    for that i am going to install "ORACLE ENTERPRISE LINUX" 1st and then oracle 10g over my laptop.
    my questions is :
    1-should i perform a fresh installation of my OS (XP) ->it should be clear of EBS 12R. and then linux
    because i have read that oracle softwares change some registry settings ???
    -if i can go ahead than i have to ask one thing more
    ill be installing linux in D: drive of my laptop .now during installation there is a warning
    ->"the partition table over drive sda in unreadable.to create a new partition it must be initialized causing the loss of all data on the drive "
    if i go for yes then is it going to delete all previous data over my hard drive ???
    if yes can i avoid this situation ??
    thnx for any guidance.
    REGARDS !

    hi
    i have checked those links and i must say m thankful to you for your guidance :)
    being an under grad student its very difficult for me to get some help .. and you guys always help a lot without even considering my level of knowledge .
    thnx
    REGARDS !

  • Oracle 10g installation problem on redHat

    Dear pals,
    Hi, I got an error while installing the 10g into my redhat machine. My redhat should be supported, but not know what is happened...
    ./runInstaller
    Starting Oracle Universal Installer...
    Checking installer requirements...
    Checking operating system version: must be redhat-2.1, UnitedLinux-1.0 or redhat-3
    Failed &lt;&lt;&lt;&lt;
    Exiting Oracle Universal Installer, log for this session can be found at /ora/oraInventory/logs/installActions2004-03-31_11-39-25AM.log
    The error log show the same thing thus nothing can help.
    My Redhat version is:
    Linux version 2.4.20-8 ([email protected]) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Mar 13 17:54:28 EST 2003
    Is there anyone can help? Thank you very much in advance.
    Regards,
    Eddie

    Werner Puschitz has a good home page (sorry, I forgot the link) on that:
    su - root
    cp /etc/redhat-release /etc/redhat-release.backup
    cat > /etc/redhat-release << EOF
    Red Hat Enterprise Linux AS release 3 (Taroon)
    EOF
    It works for me on RH9.0. Change redhat-release.backup to
    redhat-release after you are done with your installation.

  • Oracle 10G installation problem, and errors on SOLARIS 10 x86

    HI.
    I installed the last version of oracle 10g on a x86 SOLARIS 10 system.
    When the installer arrived at Configuration assistants, the window is stopping, and I can't see forward. But when I look at the installAction.log, the installation is checked as OK (?).
    When I launch sqlplus, and startup inside, it is said the ora-00205 error (problem with control files), and in the end, I'm really suprised there's no the database I told the installer to create at the beginning. But should I be surprised? As I didn't see really the end of the installation, and the installer didn't propose me the PATH where to install the DB, well, I guess there's something wrong.
    Could anybody tell me how to solve these problems, please?
    Thank you :)

    Two options:
    1. Create database using DBCA - execute $ORACLE_HOME/bin/dbca
    2. Create database manually (without DBCA)

  • Error while Oracle 10g  Installation suse linux

    Hi,
    All i am facing issue while installing Oracle 10g release 2 on open suse.
    All test are getting passed but getting a error reltated to ip address as follows.
    INFO: Checking DetectIfDHCPAssignedIP
    This is a prerequisite condition to test whether the primary IP address of the system is DHCP-assiged or static.
    INFO: Detecting the IP.....:10.31.215.64
    INFO: Checking the network interface display name.... :eth0
    INFO: Checking the network reference name..... :eth0
    INFO: Checking the platform .......46
    INFO: Checking the LINUX vendor .... :SuSE
    INFO: Check complete. The overall result of this check is: Not executed <<<<
    Also while installing getting error as,
    Checking Network Configuration requirements ...
    Check complete. The overall result of this check is: Not executed <<<<
    Recommendation: Oracle supports installations on systems with DHCP-assigned public
    IP addresses. However, the primary network interface on the system should be
    configured with a static IP address in order for the Oracle Software to function
    properly. See the Installation Guide for more details on installing the software
    on systems configured with DHCP.
    Please help me to resolve issue.
    BR,
    Rajesh
    Edited by: Rajesh.Rathod on Dec 20, 2010 12:52 AM

    Hi,
    I tried to follow each step of oracle documentation but network configuration requirement is failing.
    please find following log.
    Checking operating system requirements ...
    Expected result: One of redhat-3,redhat-4,SuSE-9
    Actual Result: SuSE-9
    Check complete. The overall result of this check is: Passed
    =======================================================================
    Checking operating system package requirements ...
    Checking for make-3.79; found make-3.81-128.14.     Passed
    Checking for binutils-2.14; found binutils-2.19.51-10.26.4.     Passed
    Checking for gcc-3.2; found gcc-4.4-4.2.     Passed
    Checking for libaio-0.3.96; found libaio-0.3.104-144.2.     Passed
    Check complete. The overall result of this check is: Passed
    =======================================================================
    Checking kernel parameters
    Checking for semmsl=250; found semmsl=1250.     Passed
    Checking for semmns=32000; found semmns=32000.     Passed
    Checking for semopm=100; found semopm=100.     Passed
    Checking for semmni=128; found semmni=256.     Passed
    Checking for shmmax=536870912; found shmmax=3294967296.     Passed
    Checking for shmmni=4096; found shmmni=4096.     Passed
    Checking for shmall=2097152; found shmall=2097152.     Passed
    Checking for file-max=65536; found file-max=131072.     Passed
    Checking for VERSION=2.6.5-7.201; found VERSION=2.6.31.5-0.1-desktop.     Passed
    Checking for ip_local_port_range=1024 - 65000; found ip_local_port_range=1024 - 65000.     Passed
    Checking for rmem_default=262144; found rmem_default=4194304.     Passed
    Checking for rmem_max=262144; found rmem_max=4194304.     Passed
    Checking for wmem_default=262144; found wmem_default=262144.     Passed
    Checking for wmem_max=262144; found wmem_max=262144.     Passed
    Check complete. The overall result of this check is: Passed
    =======================================================================
    Checking Recommended glibc version
    Expected result: ATLEAST=2.3.3-98.28
    Actual Result: 2.10.1-10.4
    Check complete. The overall result of this check is: Passed
    =======================================================================
    Checking physical memory requirements ...
    Expected result: 922MB
    Actual Result: 5460MB
    Check complete. The overall result of this check is: Passed
    =======================================================================
    Checking available swap space requirements ...
    Expected result: 5460MB
    Actual Result: 10244MB
    Check complete. The overall result of this check is: Passed
    =======================================================================
    Checking Network Configuration requirements ...
    Actual Result: :java.lang.NullPointerException:Exception/Error Occurred
    Check complete. The overall result of this check is: Not executed <<<<
    Recommendation: Oracle supports installations on systems with DHCP-assigned public IP addresses. However, the primary network interface on the system should be configured with a static IP address in order for the Oracle Software to function properly. See the Installation Guide for more details on installing the software on systems configured with DHCP.
    =======================================================================
    Validating ORACLE_BASE location (if set) ...
    Check complete. The overall result of this check is: Passed
    =======================================================================
    Checking Oracle Home path for spaces...
    Check complete. The overall result of this check is: Passed
    =======================================================================
    Checking for proper system clean-up....
    Check complete. The overall result of this check is: Passed
    =======================================================================
    Checking for Oracle Home incompatibilities ....
    Actual Result: NEW_HOME
    Check complete. The overall result of this check is: Passed
    =======================================================================
    Checking Network Configuration requirements ...
    Actual Result: :java.lang.NullPointerException:Exception/Error Occurred
    Check complete. The overall result of this check is: Not executed <<<<
    Recommendation: Oracle supports installations on systems with DHCP-assigned public IP addresses. However, the primary network interface on the system should be configured with a static IP address in order for the Oracle Software to function properly. See the Installation Guide for more details on installing the software on systems configured with DHCP.
    =======================================================================
    Please suggest how to resolve.

Maybe you are looking for