Oracle 10g Installtion error Network Configuration requirements ... failed

Checking Network Configuration requirements ...
Check complete. The overall result of this check is: Failed <<<<
Problem: The install has detected that the primary IP address of the system is DHCP-assigned.
Recommendation: Oracle supports installations on systems with DHCP-assigned IP addresses; However, before you can do this, you must configure the Microsoft LoopBack Adapter to be the primary network adapter on the system. See the Installation Guide for more details on installing the software on systems configured with DHCP.

Are you installing Oracle 10G R2? If this is the case then for DHCP network environments, you need to create a Microsoft loop back adapter.
Microsoft Loopback Adapter creation:
===========================
Step 1: Programs -> control panel -> Add Hardware.
Step 2: In the Add Hardware wizard. Click 'Next' and select 'Yes, I have already connected the hardware'. option and click on 'Next'.
Step 3: Select the last option 'Add a new hardware device' from the 'Installed hardware' window and click on 'Next'.
Step 4: Select the last option 'Install hardware that I manually select from the list (Advanced) and click on 'Next'.
Step 5: Select 'Network adapters' in 'Common hardware types' list and click on 'Next'.
Step 6: Where you can see 'Microsoft loopback adapter' on the right hand side of the frame.
Step 7: proceed with all default installation and then try installing Oracle.
I hope this will suffice.
Thanks
Venugopal

Similar Messages

Checking Network Configuration requirements

Hi
I am getting the following error while installing oracle database 11gR1
Checking Network Configuration requirements ...
Check complete. The overall result of this check is: Not executed <<<<
Recommendation: Oracle supports installations on systems with DHCP-assigned public IP addresses. However, the primary network interface on the system should be configured with a static IP address in order for the Oracle Software to function properly. See the Installation Guide for more details on installing the software on systems configured with DHCP.
========================================================
OS: SUSE 10 SP2
My network is configured to static ip, and DHCP is disabled. I don't know what else can be the reason, please, give some pointers...
regards
RF

oracle@bitmatrix:~> /sbin/ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:13:8F:B1:A4:0D
inet addr:192.168.102.70 Bcast:192.168.102.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:102126 errors:0 dropped:0 overruns:0 frame:0
TX packets:1323 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:7368939 (7.0 Mb) TX bytes:83864 (81.8 Kb)
Interrupt:177 Base address:0xcc00
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:84093 errors:0 dropped:0 overruns:0 frame:0
TX packets:84093 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:22063435 (21.0 Mb) TX bytes:22063435 (21.0 Mb)

Error during Checking Network Configurations Requirements in RHEL3 VM

Hi,
I have a Red Hat Enterprise Linux Image Virtual Machine on my desktop which uses Fedora Linux. I have set this up using VMplayer.
I need to install Oracle 10g on the RHEL VM.
As the RHEL VM does not have X Windows, I am connecting to it from the Fedora Linux to do the installation.
During the Product-specific Prerequisite checks:
Checking Network Configurations Requirements throws an error,
Please find it below:
Actual Result: Unknown Host Exception has Occured :rhel3vm:rhel3vm
Check complete: The overall result of this check is: Not executed <<<<
Recommendations: Oracle supports installations on systems with DHCP-assigned public IP addresses. However, the primary network interface on the system should be configured with a static IP address in order for the Oracle software to function properly.
The Fedora Linux gets the IP address from the DHCP and allocates an IP address to the VM.
However, when we set both of them as static and the problem still persists, and also when we set the fedora as dynamic and RHEL VM as static, the issue is not resolved.
Any help will be truely appreciated. Thank you.

We were running a non-DHCP (static IP) configuration and ran into this issue. We discovered that the hostname and FQDN were not correctly specified in the /etc/hosts file.
Fixing the hosts file to correctly reference the IP resolved the issue.
Hope this helps...
-john

Network configuration requirements 10g

hi every body
i am trying to install oracle 10 g db using Vmware on Centos 5.
i have performed all the steps as described in installation guides but when OUI is checking pre reqs it is giving this error
"checking network configuration requirements" and then "not executed"
can somebody please specify these requirements ???
in case i want to move forward it says that you can expect some problems during installation ???
thnx in advance .
Regards

do you have a network setup ? Can you ping other servers from the VM ?
You can run a database without a network. The listener configuration may fail, but you can easily re-run it later. You could just do the install, and see if anything else fails. If it does, the error may give more information.
Or you can turn off the check using
runInstaller -ignoreSysPrereqs

Network config requirement fails when installing Oracle 11gR1 on Windows XP

Hi
I am trying to install 11g on Windows XP Professional, I am getting
checking Network Configuration requirements ...
Check complete. The overall result of this check is: Not executed <<<<
Recommendation: Oracle supports installations on systems with DHCP-assigned IP addresses; However, before you can do this, you must configure the Microsoft LoopBack Adapter to be the primary network adapter on the system. See the Installation Guide for more details on installing the software on systems configured with DHCP.
========================================================
In the installation log I can see:
Checking DetectIfDHCPAssignedIP
INFO: Checking DetectIfDHCPAssignedIP
This is a prerequisite condition to test whether the primary IP address of the system is DHCP-assiged or static.
INFO: Detecting the IP.....:127.0.0.1
INFO: Checking the network interface display name.... :MS TCP Loopback interface
INFO: Checking the network reference name..... :lo
INFO: Checking the platform .......912
INFO: Check complete. The overall result of this check is: Not executed <<<<
====================================================================
I installed Loop back adaptor and gave IP: 10.10.10.10 and subnet mask as : 255.255.255.0 .I added the entry 10.10.10.10 locahost in host file as well.
Could anybody tell me what is the problem?
Thanks
Praveena

I am able to resolve this by all network connections except Loop Adaptor connection and changing my computer name from LOCALHOST to HOME.

Check networking configuration requirements

hi all , i am trying to install oracle database 10g rel2 , and i came across this step :
check networking configuration requirements
with warning ,
can i skip this warning or what ?
thanks

Check complete. The overall result of this check is: Passed
=======================================================================
Checking Network Configuration requirements ...
Check complete. The overall result of this check is: Failed <<<<
Problem: The install has detected that the primary IP address of the system is DHCP-assigned.
Recommendation: Oracle supports installations on systems with DHCP-assigned IP addresses; However, before you can do this, you must configure the Microsoft LoopBack Adapter to be the primary network adapter on the system. See the Installation Guide for more details on installing the software on systems configured with DHCP.
=======================================================================
Validating ORACLE_BASE location (if set) ...
Check complete. The overall result of this check is: Passed
=======================================================================
Checking Oracle Home path for spaces...
Check complete. The overall result of this check is: Passed
=======================================================================
Checking Oracle Home path for location ...
Check complete. The overall result of this check is: Passed
=======================================================================
Checking for proper system clean-up....
Check complete. The overall result of this check is: Passed
=======================================================================
Checking for Oracle Home incompatibilities ....
Actual Result: NEW_HOME
Check complete. The overall result of this check is: Passed
=======================================================================

Network Configuration requirements not executed, why?

During installation all checks are passed but this one, is there any particular reason for this check not to be executed? Should I worry over it not beein executed?
Checking Network Configuration requirements ...
Check complete. The overall result of this check is: Not executed <<<<
Recommendation: Oracle supports installations on systems with DHCP-assigned public IP addresses. However, the primary network interface on the system should be configured with a static IP address in order for the Oracle Software to function properly. See the Installation Guide for more details on installing the software on systems configured with DHCP.
I'm trying to install Oracle 10g 2 on a Red Hat 4 server with a static IP.

Hi!
Either your machine is setup to use DHCP after all or the installer just has trouble to find the correct information.
Recheck the network settings of your machine (redhat-config-network).
Just ignore the warning and continue.
cu
Andreas

CHECKING NETWORK CONFIGURATION REQUIREMENTS : WARNING

Hello........
when I want to install oracle 10.2.0.1 software, there is warning about CHECKING NETWORK CONFIGURATION REQUIREMENTS
it is :
Checking Network Configuration requirements ...
Check complete. The overall result of this check is: Failed <<<<
Problem: The install has detected that the primary IP address of the system is DHCP-assigned.
Recommendation: Oracle supports installations on systems with DHCP-assigned IP addresses; However, before you can do this, you must configure the Microsoft LoopBack Adapter to be the primary network adapter on the system. See the Installation Guide for more details on installing the software on systems configured with DHCP.
what can I do
tank you very much to help
ömer faruk akyüzlü
in Turkey

I suggest you to read this thread: Re: I can't access to my Enterprise Manager. Then you'll realize why it is important to define a fixed IP Address and not to entirely rely on a DHCP dynamically assigned IP Address. This thread shows you how to configure a Loopback adapter to solve this issue.
~ Madrid

Oracle 10g ASM and RAC configuration

Hi all,
I want to ask to everybody something about Oracle 10g RAC and ASm configuration. We plan to migrate to Oracle 10g from 9i, and we will begin configuring oracle but we have to decide which configuration are the best.
Our materials are bellow:
Hardware: RP 3440 (HP)
OS : HPUX 11i Ver 1
Storage: EVA 4000 (eva disk group)
The problem is:
Our supplier recommand us to use HP serviguard + HP serviceguard extension for RAC+ RAc and Raw device as configuration.
But we want to use Oracekl Clusterware + RAC + ASM
My question is if anybody know what is the best configuration, we want to use ASm.
Can HP serviguard use ASM.
Some documentations or link explain oracle RAC and ASM configuration will be appreciate.
Thanks for your help.
Regards.
raitsarevo

Hi,
I want to use RAC for clustering. My shared disk is a NetApp Filer FS250 that can only be mounted throught NFS. RAW devices have to be excluded, alsi OCFS i think works similar to raw devices and need to see phisical disk to create partition. ASM instead can work on an NFS mount?
Ste
Visit http://www.stefanocislaghi.it/

Oracle 10G JMS error : Failed to handle dispatch message ... exception ORABPEL-05002

Hi All,
We are using a JMS adapter as partner link in a BPEL process to produce messages to JMS Queue.
We are getting an error while producing a message to a JMS Queue.
The error comes for 1 or 2 instances among 5 to10 intsances. (all these instances ran with in 1 or 2 seconds).
We are using Oracle 10G SOA suite.
This error is getting in the Production environment.
The error is as follows (took error from server log).
Failed to handle dispatch message ... exception ORABPEL-05002
Message handle error.
An exception occurred while attempting to process the message "com.collaxa.cube.engine.dispatch.message.invoke.InvokeInstanceMessage"; the exception is: faultName: {{http://schemas.oracle.com/bpel/extension}bindingFault}
messageType: {{http://schemas.oracle.com/bpel/extension}RuntimeFaultMessage}
parts: {{summary=file:/sw/appaia/product/SOA/bpel/domains/default/tmp/.bpel_CurrencyExchangeListEbizJMSProducer_1.0_4ec528ec93a8a6ff0278fab9701dcc71.tmp/CurrencyExchangeListEbizJMSProducerV1.wsdl [ Produce_Message_ptt::Produce_Message(OutputParameters) ] - WSIF JCA Execute of operation 'Produce_Message' failed due to: Adapter Framework unable to create outbound JCA connection.
file:/sw/appaia/product/SOA/bpel/domains/default/tmp/.bpel_CurrencyExchangeListEbizJMSProducer_1.0_4ec528ec93a8a6ff0278fab9701dcc71.tmp/CurrencyExchangeListEbizJMSProducerV1.wsdl [ Produce_Message_ptt::Produce_Message(OutputParameters) ] - : The Adapter Framework was unable to establish an outbound JCA connection due to the following issue: oracle.j2ee.connector.proxy.ProxyInterceptException: javax.resource.ResourceException: RollbackException: Transaction has been marked for rollback: null [Caused by: RollbackException: Transaction has been marked for rollback: null]
; nested exception is:
ORABPEL-12511
Adapter Framework unable to create outbound JCA connection.
I tried the below JMS tunings with differnt combination, but no improvement.
            <property name="useJCAConnectionPool">true</property>
            <property name="maxSizeJCAConnectionPool">500</property>
            <property name="retryMaxCount">10</property>
            <property name="retryInterval">60</property>
Please let me know if any other logs or any other information is required.
Thanks,
Pershad

sorry, I forgot the below things which I tried to tune the JMS.
<property name="retryMaxCount">10</property>
<property name="retryInterval">60</property>
<property name="useJCAConnectionPool">true</property>
<property name="maxSizeJCAConnectionPool">500</property>
Thanks.

Oracle 10G on XP : Network Adapter Connection Issue

Hi,
I am trying to install an enterprise software which uses Oracle 10g database.
I have installed the database, but installation of the enterprise software fails with the following error message.
THROWABLE EVENT {Description=[Failed to create connection],
Throwable=[java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:162)
oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:274)
oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:319)
oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:344)
oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:148)
oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:545)
The listener name is "LISTENER" and Listner service name is OracleServiceBMCPDS.
The listener is running.
LSNRCTL> status
Connecting to (ADDRESS=(PROTOCOL=TCP)(HOST=hostname)(PORT=1521))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for 32-bit Windows: Version 10.2.0.2.0 - Production
Start Date                10-JUL-2009 16:54:48
Uptime                    0 days 0 hr. 38 min. 11 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   C:\abc...\network\admin\listener.ora
Listener Log File         C:\abc...\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=hostname)(PORT=1521)))
Services Summary...
Service "BMCPDS" has 1 instance(s).
Instance "BMCPDS", status UNKNOWN, has 1 handler(s) for this service...
Service "BMCPDS.corp.capgemini.com" has 1 instance(s).
Instance "bmcpds", status READY, has 1 handler(s) for this service...
Service "BMCPDS_XPT.corp.capgemini.com" has 1 instance(s).
Instance "bmcpds", status READY, has 1 handler(s) for this service...
The command completed successfully
I am not a DBA hence finding it hard to resolve the issue. Your help is highly appreciated.
Edited by: user3533384 on Jul 10, 2009 6:12 AM

Are you talking about the Enterprise Manager Console provided by the oracle or some other enterprise software? If it is enterprise software then you need to the do the proper setting for network connection to database. Probably you will have to configure tnsname.ora and sqlnet.ora. Can you connect through SQL*Plus utility? Go to Run-->SQLPLUSW type in the username password and tnsnames entry for the database. See if you can connect. If not post us the error message.
Regards.

Oracle 10g (10.2.0.4.0) Failed on NetCA

Installing 10g (10.2.0.4.0) on Win 7 Pro. 64-bit.
Installed using command setup.exe -ignoreSysprereqs
I realize have a patch to install once I am done with the initial install
Release notes do not mention having any errors with configuration assistance part of install, so....
Install Failed on Oracle Net Configuration Assistance with the following log info listed at the end of this post.
Questions: Is this error needing resolution at this point of the install, or is this part of what is fixed with the patch? What is next step?
Assistance is greatly appreicated. Thank you!
Output generated from configuration assistant "Oracle Net Configuration Assistant":
Command = C:\Windows\system32\cmd /c call C:\Program Files\Oracle/bin/netca.bat /orahome C:\Program Files\Oracle /orahnam OraDb10g_home1 /instype typical /inscomp client,oraclenet,javavm,server,ano /insprtcl tcp,nmp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile C:\Program Files\Oracle\network\install\netca_typ.rsp
Configuration assistant "Oracle Net Configuration Assistant" failed
The "C:\Program Files\Oracle\cfgtoollogs\configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------Output generated from configuration assistant "Oracle Net Configuration Assistant":
Command = C:\Windows\system32\cmd /c call C:\Program Files\Oracle/bin/netca.bat /orahome C:\Program Files\Oracle /orahnam OraDb10g_home1 /instype typical /inscomp client,oraclenet,javavm,server,ano /insprtcl tcp,nmp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile C:\Program Files\Oracle\network\install\netca_typ.rsp
Configuration assistant "Oracle Net Configuration Assistant" failed
The "C:\Program Files\Oracle\cfgtoollogs\configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------

Yes on the Win 7 Pro. 64 bit. Verified on My Computer, Properties pages.
Here is the info right off the page I downloaded the install file from Oracle:
Oracle Database 10g Release 2 (10.2.0.4.0)
Enterprise/Standard Edition for Microsoft Windows Vista x64, Windows Server 2008 x64,
Microsoft Windows Server 2008 R2 x64, Windows 7 x64
Is that the proper version?
I had an SSD for drive C, which is where I directed the install.
The database I created during the install is on my sata D drive.
Don't know that this has anything to do with the issue, but better to give more info than not...

Problem with Oracle 10g RAC VIP network setting at Solaris 9

Dear All,
I have tried to set up a Oracle 10g RAC Release 2.
With OS solaris 9, and 2 nodes.
The nodes setting as the following:
nodes 1:
Public address: 172.16.0.121
Private address: 192.168.0.121, 192.168.1.121 (dual path for heart beat)
nodes 2:
Public address: 172.16.0.122
Private address: 192.168.0.122, 192.168.1.122
And i have assigned two IP adress 172.16.0.131, 172.16.0.132 as the VIP address for the
RAC.
And the following is the /etc/hosts file:
root@shk01 # cat /etc/hosts
# Internet host table
127.0.0.1 localhost
# public address
172.16.0.121 shk01 loghost
172.16.0.122 shk02
# heart beat
192.168.0.121 shk01-priv1
192.168.1.121 shk01-priv2
192.168.0.122 shk02-priv1
192.168.1.122 shk02-priv2
# VIP address
172.16.1.131 vip-shk01
172.16.1.132 vip-shk02
But when i run the command "$ ./runcluvfy.sh comp nodecon -n shk01,shk02 -verbose"
it shows the error:
ERROR:
Could not find a suitable set of interfaces for VIPs.
Result: Node connectivity check failed.
I did try to add the VIP address on bge0:1, as i using bge0 for the public address.
Both nodes i did using the same interface name for it.
Anyone have idea for me to check out the error?
Also, I have other question about the raw device.
As there is option for setting for ASM or raw device. If choosing raw device, does it mean that it just need to
format the storage disk but without newfs it? And then the Oracle program will able to handle it?
Thanks,
Xentar

You don't seem to state categorically that you are using Solaris Cluster, so I'll assume it since this is mainly a forum about Solaris Cluster (and IMHO, Solaris Cluster with Clusterware is better than Clusterware on its own).
Clusterware has to see the same device names from all cluster nodes. This is why Solaris Cluster (SC) is a positive benefit over Clusterware because SC provides an automatically managed, consistent name space. Clusterware on its own forces you to manage either the symbolic links (or worse mknods) to create a consistent namespace!
So, given the SC consistent namespace you simple add the raw devices into the ASM configuration, i.e. /dev/did/rdsk/dXsY. If you are using Solaris Volume Manager, you would use /dev/md/<setname>/rdsk/dXXX and if you were using CVM/VxVM you would use /dev/vx/rdsk/<dg_name>/<dev_name>.
Of course, if you genuinely are using Clusterware on its own, then you have somewhat of a management issue! ... time to think about installing SC?
Tim
---

Oracle 10g install error, FC5

Im trying to install Oracle 10g on Fedora Core 5 (as per here: http://www.oracle-base.com/articles/10g/OracleDB10gR2InstallationOnFedora5.php).
But having problems.
The install process starts fine, then stops.
Here's the last few lines of "installActions2006-03-20"
INFO:
*** Language Selection Page***
INFO: Setting the 'SelectedLanguages ( SELECTED_LANGUAGES )' property to 'en,'. Received the value from response file.
INFO:
*** Specify Local Host Name Page***
SEVERE: Abnormal program termination. An internal error has occured. Please provide the following files to Oracle Support :"/u01/app/oracle/oraInventory/logs/installActions2006-03-20_04-11-37PM.log"
"/u01/app/oracle/oraInventory/logs/oraInstall2006-03-20_04-11-37PM.err"
"/u01/app/oracle/oraInventory/logs/oraInstall2006-03-20_04-11-37PM.out"
And here's the contents of "oraInstall.....err":
Exception java.lang.NoClassDefFoundError occurred..
java.lang.NoClassDefFoundError
at oracle.sysman.oii.oiin.OiinNetOps.computeHostInfo(OiinNetOps.java:230)
at oracle.sysman.oii.oiin.OiinNetOps.<init>(OiinNetOps.java:78)
at oracle.sysman.oii.oiin.OiinNetOps.getNetOps(OiinNetOps.java:89)
at oracle.sysman.oii.oiif.oiifw.OiifwHostNameWCDE.initialize(OiifwHostNameWCDE.java:111)
at oracle.sysman.oii.oiif.oiifb.OiifbCondIterator.iterate(OiifbCondIterator.java:152)
at oracle.sysman.oii.oiic.OiicDepWizEngine.doOperation(OiicDepWizEngine.java:424)
at oracle.sysman.oii.oiif.oiifb.OiifbCondIterator.iterate(OiifbCondIterator.java:171)
at oracle.sysman.oii.oiic.OiicPullSession.doOperation(OiicPullSession.java:1273)
at oracle.sysman.oii.oiic.OiicSessionWrapper.doOperation(OiicSessionWrapper.java:289)
at oracle.sysman.oii.oiic.OiicInstaller.run(OiicInstaller.java:546)
at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:929)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.runInstaller(OiocOneClickInstaller.java:1921)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(OiocOneClickInstaller.java:2149)
Can anyone help me?
Thanks.
Mike

I have tried installing 10g several times and it keeps failing. You said that the document is complete and the installation works fine. I would love to know how you got your installation to work because I am getting the same problem that this guy ran into.
Re: Oracle 10g R2 on FC5; ORA-12157 error on installation
Here is just a small part of the errors I am getting in my log file.
==========================================================
Heap at VM Abort:
Heap
def new generation total 576K, used 369K [0xaba00000, 0xabaa0000, 0xabee0000)
eden space 512K, 65% used [0xaba00000, 0xaba54388, 0xaba80000)
from space 64K, 51% used [0xaba90000, 0xaba98398, 0xabaa0000)
to space 64K, 0% used [0xaba80000, 0xaba80000, 0xaba90000)
tenured generation total 1408K, used 550K [0xabee0000, 0xac040000, 0xafa00000)
the space 1408K, 39% used [0x
abee0000, 0xabf69af0, 0xabf69c00, 0xac040000)
compacting perm gen total 4096K, used 3564K [0xafa00000, 0xafe00000, 0xb3a00000)
the space 4096K, 87% used [0xafa00000, 0xafd7b3d8, 0xafd7b400, 0xafe00000)
Local Time = Sun Apr 30 02:20:24 2006
Elapsed Time = 0
# The exception above was detected in native code outside the VM
# Java VM: Java HotSpot(TM) Client VM (1.4.2_08-b03 mixed mode)
# An error report file has been saved as hs_err_pid13937.log.
# Please refer to the file for further information.
Command = /u01/app/oracle/product/10.2.0/db_1/jdk/jre//bin/java has failed
INFO: Configuration assistant "Oracle Net Configuration Assistant" failed
*** Starting OUICA ***
Oracle Home set to /u01/app/oracle/product/10.2.0/db_1
Configuration directory is set to /u01/app/oracle/product/10.2.0/db_1/cfgtoollogs. All xml files under the directory will be processed
INFO: The "/u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK

Oracle 10g installation error in AIX 6.1 Platform

Friends ,
While installing Oracle 10g (10.2.0.1.0) on AIX 6.1 platform ,I get the following errors :
Checking operating system requirements ...
Expected result: One of 5200.004,5300.002
Actual Result: 6100.01
Check complete. The overall result of this check is: Failed <<<<
Problem: Oracle Database 10g is not certified on the current operating system.
Recommendation: Make sure you are installing the software on the correct platform.
=======================================================================
Checking operating system package requirements ...
Check complete. The overall result of this check is: Not executed <<<<
OUI-18001: The operating system 'AIX Version 6100.01' is not supported.
Recommendation: Install the required packages before continuing with the installation.
=======================================================================
Checking recommended operating system patches
Check complete. The overall result of this check is: Not executed <<<<
OUI-18001: The operating system 'AIX Version 6100.01' is not supported.
Recommendation: You may actually have installed patches which have obsoleted these, in which case you can successfully continue with the install. If you have not, it is recommended that you do not continue. Refer to the readme to find out how to get the missing patches.
=======================================================================
Is there any solution to resolve this problem like patch update or anything ? Barring this , does oracle 11g is recommended in AIX 6.1 unix platform ? Do you have any idea plz ?

shipon_97 wrote:
Friends ,
While installing Oracle 10g (10.2.0.1.0) on AIX 6.1 platform ,I get the following errors :
Checking operating system requirements ...
Expected result: One of 5200.004,5300.002
Actual Result: 6100.01
Check complete. The overall result of this check is: Failed <<<<
Problem: Oracle Database 10g is not certified on the current operating system.
Recommendation: Make sure you are installing the software on the correct platform.
=======================================================================
Is there any solution to resolve this problem like patch update or anything ? Barring this , does oracle 11g is recommended in AIX 6.1 unix platform ? Do you have any idea plz ?Check certification matrix:
http://www.oracle.com/technology/support/metalink/index.html
10gR2 only 64bit is certified with AIX 6.1

Oracle 10g Installtion error Network Configuration requirements ... failed

Similar Messages

Maybe you are looking for