Oracle 10g IO perfomance on vmware virtual machine
Hi Friends,
I am facing perfomance issue on oracle10g 64bit, installed on rhel5.3 64bit on a vmware virtual machine because of disk IO.
While taking DB backup using netbackup I can see the datatransfer speed comes up to 100 Mbps.
But when oracle IO requests comes it is not going more than 30 Mbps.
And the CPU IO wait remains same as on both of the time. (20% to 40%)
Please help.
Regards,
Nayagan
Could you verify this behaviour outside a VMware virtual machine?
If yes, then please open an SR on Metalink to let support diagnose.
Provide an RDA, AWR snapshot if you have licensed the Diagnistic Pack - if not than provide STATSPACK snapshots.
Sorry - but this is a database upgrade forum :-)
Regards
Mike
Similar Messages
-
Oracle Database 10g on Red Hat Linux Virtual Machine download location?
anyone know where i can download the vmware image of redhat and oracle preinstalled?
its called "Oracle Database 10g on Red Hat Linux Virtual Machine"
i found a reference to it on this page, but the link at the bottom is broken.
http://www.oracle.com/technology/obe/10gr2_db_vmware/htmlfiles/readme_oracleonlnxeval.html
i want to test out oracle on redhat before i install it completelyPlease don't cross post on many forums,
check where can i download a vmware image of redhat and oracle preinstalled? -
Oracle Linux 6 installation FAILURE on VMWare virtual machine
I just downloaded OEL 6.0 x64, created a new VMWare virtual machine (I have many VMWare VMs running various flavors of OEL 5) and did an installation. It all seemed to work fine. I was just testing, so I didn't do any customization. It finished, and looked good, just like all the other ones I've done. I clicked "reboot", and it did. Or it tried to.
It did boot from the disk, but after about 15 seconds, it said:
No root device found
Boot has failed, sleeping forever.
I retried the installation using a fresh VM, and even let the installer check the whole DVD first. Same result.
Anyone installed OEL 6 to a virtual machine on VMWare ESX?
Any idea what the heck could be wrong?The problem is:
The Red Hat compatible kernel includes the vmw_pvscsi driver whereas Unbreakable Enterprise Kernel doesn’t. The kernel that the installer boots first does have the drivers, which is why everything is set up fine until UEK tries to find the root volume. It's an issue we plan to address in an updated kernel.
For now the workaround is:
When creating a new VM in VSphere, do not pick Red Hat Enterprise Linux 6 x86-64 as the OS type but use Oracle Linux 5 x86-64 (or Red Hat Enterprise Linux 5). ESX will then expose the LSI logic scsi controller to the OS and the 2.6.32-100.28.* kernel will work.
Sergio -
Oracle product not supported on Vmware virtual environment
Members,
Oracle certification says Oracle products running on Vmware virtual environment are not supported.
One of my development Identity manager setup is running on Vmware virtual environment.
As of now application is running fine and I am getting support from Oracle on product issues.
Can anyone suggest what could be the impact of this in future and what types of issues I can expect in future.
Thanks,
S MCould you verify this behaviour outside a VMware virtual machine?
If yes, then please open an SR on Metalink to let support diagnose.
Provide an RDA, AWR snapshot if you have licensed the Diagnistic Pack - if not than provide STATSPACK snapshots.
Sorry - but this is a database upgrade forum :-)
Regards
Mike -
Oracle 10g EE Windows Client on different machine than Pracle 10g EE server
I downloaded the Oracle 10g EE Windows Client and installed it on a WinXP (SP3) machine that had no Oracle components installed. The idea was to use it to connect to an Oracle 10g EE database running on another machine on the network.
After installing the software, what I find in the start menu is:
Oracle Client 10g Express Edition
- Go To Online Forum
- Read Documentation
- Register For Online Forum
- Run SQL Command Line
When I "Read Documentation" and go to the "Getting Started" link it talks about other menu options which I can't find ("Go To Database Home Page").
Clearly something isn't working here, but what?
PeteThis option is available on server. Not on client.
Use following link instead:
http://<server_ip_address>:8080/apex/ -
Problem to connect to VMware virtual machine in VMM
I have a problem to connect to the VMware virtual machine console through the VMM Admin Console. I get the message "For a connection with this virtual VMware machine necessary ActiveX object is not installed. Would like you to install the VMware ActiveX element now?"
If I click "yes", IE opens. To the installation of this ActiveX element I've added the web access side of the VMware-Host to the trustworthy sites in IE. I've also disabled the strengthened security configuration for IE. But it did not help.
What can I still try?
ThxThe most common problem getting the activeX installed is that the VMware infrastructure web portal has not been setup completely. It is from that portal that the activeX is downloaded and installed. Ensure that the VMware infrastructure portal has been setup
and configured for SSL. The Url we attempt to get theactiveX from is https://HostName/ui/plugin/msie/vmware-mks.cab
Uhm, yea, that URL is invalid. Maybe it was for vCenter 3.x? or 4.0 only? Does not resolve on v4.1 :(
If you are having trouble getting the activeX installed there are a couple of workarounds. One workaround is to install the VMWare Infrastructure Client onto your machine where you are running the VMM Admin Console. The Infrastructure Client installation
installs VMWare's activeX along with its own client.
Tried that... it doesn't use ActiveX anymore (still 4.1) so no go :(
Another workaround is to login to the VMware Infrastructure Web Access portal and one time connect to a VM. This will also download and install the activeX and let it work.
Tried that... it doesn't use ActiveX anymore (still 4.1) so no go :(
So basically I need either the SCVMM guys to figure out to do this in the new version from vmware or I need some vmware experts to tell me where I can find this activex component... -
Oracle 10g installation on linux using virtual box.
Hi,
Iam trying to install oracle 10g on enterprise linux using virtual box.I downloaded oracle 10g for linux and while running the installer,Iam getting this error
Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2010-04-16_07-29-46AM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(Unknown Source)
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at sun.security.action.LoadLibraryAction.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
at sun.awt.DebugHelper.<clinit>(Unknown Source)
at java.awt.Component.<clinit>(Unknown Source)
Please help me to solve thisuser9362721 wrote:
Hi,
Iam trying to install oracle 10g on enterprise linux using virtual box.I downloaded oracle 10g for linux and while running the installer,Iam getting this error
Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2010-04-16_07-29-46AM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directoryHi.
This question was answered in this forum yesterday. And the day before. And the day before that. And ... (Or at least it feels like we get this every day, and sometimes several times a day.)
Search for 'xhost' -
Error when converting VMware virtual machine to Azure with new Virtual Machine Converter 2.0
Hello
I'm trying to convert a VMWare virtual machine to Azure with the new Microsoft Virtual Machine Manager 2.0
The process stops when the disk conversion start. Error log below.
Thanks for any advice.
Regards
Toon
04/18/2014 14:53:03 +02:00 [9] VERBOSE:
This conversion will proceed off-line.
04/18/2014 14:53:03 +02:00 [9] VERBOSE:
The uninstallation of tools is not supported in off-line machine conversion scenarios.
04/18/2014 14:53:03 +02:00 [9] VERBOSE:
NOT preparing source virtual machine, this conversion is being treated as off-line.
04/18/2014 14:53:03 +02:00 [9] VERBOSE:
Downloading VMware virtual disks from source virtual machine
04/18/2014 14:53:04 +02:00 [9] VERBOSE:
System.Net.WebException: The remote server returned an error: (404) Not Found.
at Microsoft.Accelerators.Mvmc.Engine.ForVMware.ExportLease.GetFiles(IDownloadAdapter adapter, String host, DirectoryInfo dirInfo, TaskContext taskContext)
at Microsoft.Accelerators.Mvmc.Engine.ForVMware.VirtualMachine.DownloadFiles(IDownloadAdapter downloadAdapter, String toPath, TaskContext context)
at Microsoft.Accelerators.Mvmc.Engine.ServiceLayer.Internal.MachineConversionService.ConvertToDrives(IMachineConversionRequest machineConversionRequest, IPostProgress& provisionHyperVPhase, IVirtualMachine& sourceVM, TaskContext taskContext)
04/18/2014 14:53:04 +02:00 [9] VERBOSE:
Downloading device (/vm-3213/VirtualLsiLogicController0:0) disk-0.vmdk
04/18/2014 14:53:04 +02:00 [9] EXCEPTION:
System.Net.WebException: The remote server returned an error: (404) Not Found.
at Microsoft.Accelerators.Mvmc.Engine.ForVMware.ExportLease.GetFiles(IDownloadAdapter adapter, String host, DirectoryInfo dirInfo, TaskContext taskContext)
at Microsoft.Accelerators.Mvmc.Engine.ForVMware.VirtualMachine.DownloadFiles(IDownloadAdapter downloadAdapter, String toPath, TaskContext context)
at Microsoft.Accelerators.Mvmc.Engine.ServiceLayer.Internal.MachineConversionService.ConvertToDrives(IMachineConversionRequest machineConversionRequest, IPostProgress& provisionHyperVPhase, IVirtualMachine& sourceVM, TaskContext taskContext)
at Microsoft.Accelerators.Mvmc.Engine.ServiceLayer.Internal.MachineConversionService.<>c__DisplayClass3.<ConvertToDrivesAsync>b__2()
at System.Threading.Tasks.Task`1.InnerInvoke()
at System.Threading.Tasks.Task.Execute()
04/18/2014 14:53:04 +02:00 [9] Exception caught : System.Net.WebException: The remote server returned an error: (404) Not Found.
at Microsoft.Accelerators.Mvmc.Gui.Model.ConversionModel.ConvertGuestMachine()
at Microsoft.Accelerators.Mvmc.Gui.ViewModels.Machine.MachineCompletionViewModel.OnWorkerDoWork()
04/18/2014 14:53:04 +02:00 [1] Background task is complete.
04/18/2014 14:53:04 +02:00 [1] Conversion error message is displayed.
04/18/2014 14:53:04 +02:00 [1] Value of 'ErrorMessage' = 'The remote server returned an error: (404) Not Found.'
04/18/2014 14:53:06 +02:00 [1] Pressing Finish on the 'Completion' page.
04/18/2014 14:53:06 +02:00 [1] UI wizard is closing.
04/18/2014 14:53:06 +02:00 [1] Message box displays : 'Are you sure you want to exit? Any running jobs will be cancelled and the wizard will close.'.
04/18/2014 14:53:09 +02:00 [1] Cancel confirmation prompt was canceled by user.Hi,
Have you found any solution?
Thanks
Alessandro -
I was able to migrate all my stuff from the old iMac to the new iMac but can't access my VMware virtual machine. How do I transfer it from the old to the new.
I would
1. use an ext hd or usb stick to copy them over to manually
2. transfer them manually over the network to a shared volume
never could get migrate to work at all from my old windows pc
so I ended up copying everythign -
HT3231 Migration Assistant and vmware virtual machine
I would like to use Migration Assistant to move my information from a MacBook Pro to a new MacBook Air. Before I perform that, I would like to make sure I don't migrate any problems in the new machine.
How do I choose for example NOT to migrate the VMWARE virtual machine in my older MacBook Pro so that the new MacBook Air becomes lighter?
ThanksDuring the setup of your MacBook, it will ask you to restore a backup, so choose the option to restore data from another Mac and follow its steps. You will be able to choose what you want to restore.
If you haven't modified anything, VMware stores virtual machines in Documents folder, so the only thing you have to do is to untick the Downloads folder and the virtual machine won't be migrated to the MacBook Air. See > http://pondini.org/OSX/SetupLion.html
If you are going to migrate applications, it's important to check that they are compatible with Mountain Lion. PowerPC applications aren't compatible and you will be wasting space if you transfer these apps -
Flash media server 3 on VMWare virtual machine
Do any one know can a FMS 3 run smoothly on a vmware virtual
machine? if yes, is there any requirement need to be aware? thanks
for any adivse.Rather than VMWare you may want to consider a operating
system-level virtualization. I recommend OpenVZ. This has excellent
native speed performance for the guest OS. I have This system with
the host and guests all CentOS4.5, running variously FMS2, FMS3,
Red5 etc in the guests. Its super easy to start, stop, clone,
distroy the guests. the guests can be firewalled from the host. You
can set guaranteed min and max memory allocations for the guests.
You can run Linux distros as guests that differ from the
host, but you can't run non-linux guests, unlike in VMWare.
Also, the default resource allocations for the newly created
OpenVZ guests are insufficient to run FMS in, so the config file
for the guest needs to be changed. -
Oracle 10g RAC on 2 VMware Windows 2003 images corrupts image
It happened twice on each of the 2 VMware workstation 5 on which I am trying to set up an Oracle 10g R2 RAC. After installing CRS and rebooting machine I lost access to the Network Connections and the Disk Management. Basically I have to create a new image. Before I start a third time I would appreciate advice or feedback from other users.
Also Configuration Assistants failed to install.
ThanksCheck out my articles at http://dbasupport.com on 10g R2 RAC Clusterware setup. I was able to do that on my vmware BUT I hope to have the very irritating ASM scenario done before my 4th Article.
Check it out. -
Oui-10207error while installing oracle 10g on linux in vmware
Hi,
I have installed vmware on windows 7(64 bit) on which i have installed Oracle Enterprise linux 5. I have set all the variables correctly. but when i try to install oracle 10g on linux, i get the error
OUI-10207:there is not enough disk space in the OUI swap area /tmp/OraInstall2011-10-17_03-44-48PM.Please make atleast 529KB of space avaivale and retry.
but i have around 95bg of space. My partitions are as follows
Device Boot Start End Blocks Id System
/dev/sda1 * 1 12551 100815876 83 linux
/dev/sda2 12552 13041 3935925 82 Linux swap/solaris
/dev/sda3 13042 13054 104422+ 83 linux
Please help me in solving the problem.
Thanks
VirajWhat is your swap size? try to increase size
execute below command on terminal, paste result here.
#swapon -s
#free
Tips : how to increase swap space
http://hackertrip.wordpress.com/2011/09/11/increase-swap-space/ -
Monitor profiling & ICC profile management in VMware virtual machines?
Greetings,
I'm successfully running Photoshop CC in Windows 7 on bare metal PCs. To support that, I profile/calibrate my monitors with Datacolor Spyder4Elite and print with Qimage. Photoshop, Spyder4, and Qimage all create and/or install ICC profiles. Does any/all of that function correctly within virtual machines hosted by VMware Workstation (v9.0.2, specifically)? Datacolor's Spyder4Elite, for example, relies upon periodic reloading of the LUT (Look-Up Table) of the graphics adapter. The other apps I mention ask Windows to use ICC profiles. Can I successfully move all of these workflow elements into virtual machines?
Thanks in advance for your assistance.No, actually the System Default stayed the same, but the ACER profile showed up in the Devices panel. However, [ ] Use My Settings was NOT checked, implying they found some way to install the profile that's outside the normal configuration settings somewhere between the Advanced and Devices level configuration.
The fix is to check the [ ] Use My Settings box, add the profile one wants to use in the Devices panel, and [Set as Default Profile]. This overrides the setting above.
-Noel -
Adobe X cannot print from Win 7 VMWare virtual machine
I've created several virtual machines using VMWare Workstation and VMWare fusion.
I've installed Win 7 Pro 64bit. I've installed either Office 2010 32 bit or 64 bit.
When I open any PDF file and click File Print. Adobe crashes. I get an OS error message the program has encountered an error and I can search online for a solution or close the program.
Either option results in the application closing.
Is this common? Can anyone else verify the same results?
Will this be patched or is it by design?
ThanksDear user,
Kindly refer to the discussion http://forums.adobe.com/thread/949886?tstart=0 and try out the workarounds provided there.
Hope this will solve your problem else provide us with some more information so that we can help you out (details like version of Adobe Reader you are using, Behaviour with other application like Notepad/Wordpad).
Thanks
sonal
Maybe you are looking for
-
Why the PO action history is not updating when i perform the vacation rules
Hi, Can any one explain why the action history is not updating when performed the vacation rules using the below example Example: A >B>C>D are in the approval hierarchy here I have defined the vacation rules by login to the user C here I selected the
-
I have a TV show saved on Dish DVR. How do I stream this to my iMac and then burn to a dvd?
-
How do i view my photos in iCloud on my laptop?
-
AMP 3.1 -- Oracle E-business Suite 11.5.10.2 CU2 Hot Cloning
Hi, New release 3.1 for Oracle Application Management Pack is available now. In last release i.e AMP 3.0 version hot cloning was supported for E-Biz 12i version only. Amp 3.1 documnetation says about smart cloning. Is hot clone of Oracle E-Biz 11.5.1
-
Where is the best place for EXS samples?
I finally upgraded from my G4 which had space issues. Now I'm wondering: Should EXS samples be on the boot drive or the media drive? How about Reason refill, RMX samples etc.? Thanks in advance!