Oracle 10g Listener Port Changes after every Restart

Hi All,
I have installed Oracle10g in my Laptop and was working fine till last week, but now when I start the Listener, it is starting with different port number other than the default port 1521. ( For example first time Listener started with port number 3110, then after restarting the Listener it becomes 3313, and so on) That means server is assigning different port numbers on every time when the listener starts.
Because of this I am not able to connect to the database.
How to make the Listener port as default 1521 permenantly.
Please help.
Regards

Hi,
Can you please check the listener.ora file? Do you have the port number
mentioned as 1521 as below:
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = my_server_name_fully_qualified)(PORT = 1521))
Regards,
Chandan

Similar Messages

How to set clock to right,because it changes at every restart?

My MBpro is having issues with time.Though I set it ,it changes after every restart.

Delete the System Preference plist file and reboot.
Deleting the System Preference or other .plist file
make sure to set the time and date again and set it to update via Apple's time server in your time zone.
What happens is your settings are stored in that file by system preferences the file is corrupted so it's not saving them,.
deleting it and rebooting, starting system preferences will recreate the file blank.
That file is used to tell the firmware what time it is, so it's kept over when you reboot and not online to get the correct time.
If the machine has incorrect time, it won't connect properly to Wifi networks and other issues result too.

Oracle 10g listener standard

Hi all,
I am trying to define Oracle 10g listener standard in my organization.
We have 60 Oracle 9i databases in an AIX node. We are planning to upgrade these database to 10g. During upgrade we want to configure the listeners according to our standard.
Now we are not using dynamic registration for Oracle 9i databases. So there are 60 seperate listeners that always try to establish connections to the database even if the database is not up. This leads to server performance problems when the applications overload the server with connection attempts when there are hundreds of processes waiting to connect.
After upgrade, we want to make all databases register with a listener for performance problems. But one listener per node can be too risky, maybe we can register a database with more than one listener.
Also, there are some reasons for shutting the listener down:
1. Cold backup
2. Apply patches
If we use only one listener per node, for cold backup we would shut down the listener and then no clients would connect to the databases.
After these explanation, I am wondering if we can mix both reducing the number of the listeners for each node and using load balance for all databases.
Do you hane any ideas, suggestions?
Thanks,
Fatma

With Oracle 10g and RMAN there is no longer any reason to be doing cold backups.
I'd run one listener per node. If this is too risky than a single database instance is also too risky and you should be investigating other high-availabilty solutions. RAC isn't always the answer.
Connection manager might also be useful in your environment.
Cheers,
Colin

My BlackBerry z10 delete after every restart

After I installed os 10.3.1.1865 into my blackberry z10 stl-3, it's resets after every restart or the battery drains, all my apps, settings, documents will be done...
please what can i do?

Hi @man605
Can you confirm that running this tool produces The fix is not applicable to this device?
Assuming that's the case, if possible can you please reproduce this issue can capture two sets of logs for me?
To do this complete the steps below.
Log Set #1 - Before restarting
Restart your device
Within 5 minutes of restarting, create a new document using Docs to Go
Open the Help app
Swipe down from the top of the screen, tap Create Report
Tap Save Log Snapshot
If prompted to upload logs, tap No
Log Set #2 - After restarting
Restart your device
Within 5 minutes of restarting, verify the file created using Docs to Go was removed
Open the Help app
Swipe down from the top of the screen, tap Create Report
Tap Save Log Snapshot
If prompted to upload logs, tap No
After completing these steps, open File Manager and browse to documents\logs.
Within two files will appear along the lines of bbswltlog<date>.zip. Tap and hold each file followed by tapping Share
Select your email address and send the log files to supportforums[at]blackberry.com with the subject Attn Ty; Logs from man605
When you send your email, please include your device PIN as well. Thanks!
Did someone help you? Click Like! Did a post solve your issue? Click Accept as Solution!
Follow me on Twitter or Google+ and subscribe to the Inside BlackBerry Help Blog

My dock would not appear. No change after a restart. After force quitting applications in order to log out all I have now is my account desktop picture and a cursur that moves okay but no icons.

My dock would not appear. Checked preferences, they seemed to be locked. No change after a restart. Tried logging out of account, had to force quit several applications. Now all I have is the account desktop picture and a cusur that works okay. nothing else is on the desktop now. How do I restore?

All I had to do was complain. I synced my iPhone to the Windows machine, checked the other account at iTunes prompting (where no apps had shown up previously), reconnected the iPad, and 140 apps downloaded including the App Store. I have no idea why.

Same bugs occuring after every restart

I'm using webOS 2.1.2 on an HP Veer 4G. Every time I restart the phone, the following bugs happen:
1) The Voice Dial shortcut that I put on the taskbar (wave) has been removed; also, the Voice Dial shortcut that I had moved to a custom location in the Applications panel is lost and the icon is moved to the last spot. Every time, I have to move it back to where I want it in the Applications panel and then re-add it to the taskbar (wave) area.
2) Even though I've already gone through the entire tutorial in hopes that it would never bother me again, a Gestures Tutorial notification comes up every single time the phone starts up. I would just like to delete this application, if possible, but I don't see a way to do it like I can with custom apps.
Has anyone else experienced these or similar issues after a restart and know of any solutions or work-arounds? Also, is there an official place that I can report bugs to Palm/HP? Thanks!
Post relates to: HP Veer p160una (AT&T)
This question was solved.
View Solution.

Thetreoguy:
Thanks for the reply! I'll look forward to an update for the Voice Dial app soon.
Regarding the Gesture Tutorial, you are correct that it did not finish the first time I used it. The tutorial actually locked up on me and I had to shut it down. I've followed it through to completion a couple of times since then, but it still pops up after every restart.
What exactly will happen if I go to Reset Options and Erase apps and data? Will it erase my personal data that I've spent a long time adding, or just the default apps? Once it erases the apps, how do I get them back (with the exception of the Gesture Tutorial, of course)? If it erases all my personal data too, is there a way to back them up and copy them back to the phone and still preserve all contact information and the link to the contact photos I've added?
Thanks again for your help.

8 fonts in the trash after every restart!

Hi.
Snow Leopard 10.6.1 is working great but I am finding 8 fonts in the trash after every restart!
ArialHB, Corsiva, Nadeem, NewPeninimMTBoldInclined, Baghdad, MshtakanRegular, NewPeninimMT, NewPeninimMTInclined.
This can't be good. Does anybody know what that means and what to do?
I see a lot of people have font-problems.
W.W.

Your choice - Back them up to CD-R if you've a mind, but I'd pull the trigger, finish them off and get rid of them. They've ended up there for a reason.
Also, don't hesisate to perform wholesale deletion of old and/or little used fonts - be skeptical of anything that has come in from MS Office 2008, including fonts related to an Equation Editor installation.
Good luck going forward.

Sticky Keys keeps turning off after every restart

the Sticky Keys option in the universal access prefs pane keeps turning off after every restart. how can i fix this?

It seems to be a common problem in the OS that when you restarts some of the settings get reset. For me it happens with the screeen dimming before sleep and the double click using 2 fingers and maybe others that I don't know about. I am hoping that its fixed in 10.4.7 which should be out within a week or so.

Oracle cache is still there after I restart the Oracle server - can it be?

Hello,
My name is Tal and I work for a software company called Mercury.
We have a strange case in Oracle 9.2.0.6 (running on Solaris 2.9) and I wonder if one of you can help.
I am running query, this query is doing something like âselect * from x where y between z and wâ.
x, y, z and w are parameters which cause the query to be one that scans a lot of data.
I run the query twice and the first time takes 60 seconds, but the second time takes only 3 seconds.
I assumed that this is caused by the database cache (block buffers).
BUT,
Then I bounced the database (shutdown immediate + startup) and rerun the query.
It comes back after 3 seconds again!!!
Can some share some info on this; it looks like Oracle cache is still there after I restart the Oracle server.
Tal Olier ([email protected]).

Regarding the buffer cache, it is definitly flushed after database restart.
There can be many factors causing your case:
1. The first time you ran the query, some other process was consuming the server resources.
2. Some other users were running heavy queries.
3. Sudden Heavy network activities.
Q: Did the query, in any time, run in 60 seconds again?
If yes, then further factors should be considered.

Oracle 10g Listener XP pro need to be restarted ...

Hello all.
Here is my problem. I have oracle 10g installed on a computer with Windows XP pro Sp1a. Every thing work fine despite 1 point. When the computer is restarted, a small software starts the different Oracle Services (Oracle Database Service and listener) and wait for the 2 services to be in the state "started". After startup, the two services are in the state "started" but, sometimes, I can not get connected to Oracle. In the listener log, I have a message "TNS-12514: TNS:listener does not currently know of service requested in connect descriptor".
To solve the problem, I have to restart either the listener service or the oracle service or both of them.
My problem is that this computer must be an "auto starting system".
What can I do to solve this problem ???? Is there a specific order to start the process ?, Should I put dependency between them ???
Thank for your help.
D. GARRIVIER

If you use, as I think, dynamic service registration (no SID_LIST in Listener.ora for your DB), then it would be better to start the listener before the Database. If not, the registration could take a few seconds (or minutes). Anyway, if this is the problem, you should be able to connect after a few seconds (or minutes).

10g listener cannot start after install 11g

Hi,
I install 11g R2 into one of 10g windows 2003 server, but I did not perform upgrade, I want the 11g coexists with 10g.
But after I install 11g and create a new 11g instance, I found that the listener cannot be started, until I change the environment variable ORACLE_HOME
of windows to 11g home directory.
But when I reboot my server, I found that the old 10g listener cannot be started,
the services cannot be started and if I try to start the listener in command "lsnrctl start", error TNS-12560: TNS:protocol adapter error prompt.
So I changed the ORACLE_HOME environment variable to 10g home directory again and the listener can be started.
And when I want to start 11g listener, I will have to change again the ORACLE_HOME environment variable to 11g home directory.
Is this a normal behaviour to have 11g and 10g co-exists in one server?
Thanks
Vincent

pj**** wrote:
Hi,
I install 11g R2 into one of 10g windows 2003 server, but I did not perform upgrade, I want the 11g coexists with 10g.
But after I install 11g and create a new 11g instance, I found that the listener cannot be started, until I change the environment variable ORACLE_HOME
of windows to 11g home directory.
But when I reboot my server, I found that the old 10g listener cannot be started,
the services cannot be started and if I try to start the listener in command "lsnrctl start", error TNS-12560: TNS:protocol adapter error prompt.
So I changed the ORACLE_HOME environment variable to 10g home directory again and the listener can be started.
And when I want to start 11g listener, I will have to change again the ORACLE_HOME environment variable to 11g home directory.
Is this a normal behaviour to have 11g and 10g co-exists in one server?
Thanks
Vincentonly 1 listener is needed on any DB Server & the listener should be for the highest version of Oracle DB Server

Oracle 10g Listener sees to stop - all was OK then a few days later it stop

lsnrctl status gives an error TNS-12560 TNS protocol adapter error followed by 32-bit windows error: 55: unknown error
All is fine after a reboot of the server but the listener will not respond to anything such as LSNRCT STOP - the only solution is a reboot of the windows server that Oracle 10g is installed on.
the listner.ora
# listener.ora Network Configuration File: E:\oracle\product\10.2.0\db_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = c:\oracle\product\10.2.0\db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.1.166)(PORT = 1521))
listener.log shows all OK, then nothing apart from the regular service_updates :
16-APR-2009 04:27:23 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=SYSTEM))(COMMAND=status)(ARGUMENTS=64)(SERVICE=(ADDRESS=(PROTOCOL=TCP)(HOST=aem)(PORT=1521)))(VERSION=169869568)) * status * 0
16-APR-2009 04:27:41 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=__jdbc__)(USER=))(SERVICE_NAME=jde)) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.166)(PORT=2946)) * establish * jde * 0
16-APR-2009 04:27:41 * service_update * jde * 0
16-APR-2009 04:28:27 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=SYSTEM))(COMMAND=services)(ARGUMENTS=64)(SERVICE=(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=aem)(PORT=1521))))(VERSION=169869568)) * services * 0
16-APR-2009 04:32:44 * service_update * jde * 0
16-APR-2009 04:36:38 * service_update * jde * 0
16-APR-2009 04:37:02 * service_update * jde * 0
I cant understand this - if it was a configuration error somewhere the listener would most likely not start in the first place - but for it to start OK and then fail seems strange - and then there is no actual error written to the listener.log.

This is a problem with non-paged memory allocation on Windows,see on metalink:
Listener start fails with Tns-12560 Windows Error:55 unknown error
Doc ID: 737637.1
Make sure you meet all software and hardware requirements according to the installation guide.
Werner

2 fonts in my trash after every restart

Hello forum,
I've been pestered by a strange buggy sitch for weeks now, and I cannot find a solution. I looked 50 pages deep into the threads regarding the FINDER, no answers. There were a few threads on Trash issues, none close to what I'm experiencing. Although not a "mission critical" problem, it's mostly an annoyance which, to me, hints of something more serious or potentially bad.
Every time I restart - either when restarting after a BootCamp session BACK to Leopard - or when simply restarting Leopard for what ever reason - I always have two fonts in my trash can, in a "Recovered Files" folder. They delete without trouble or fuss...
One of the two fonts is always " ヒラギノ角ゴ ProN W3.otf " and the other is "AppleGothic.ttf " .
Once or twice the second font was Waldorf, Adobe Garamond, Apple Garammond, whatever... This suggests to me it has little to do with the font(s) itself.
Of note; none of these fonts were being actively used by an application I was working in (i.e. Adobe InDesign, Illustrator, Photoshop, Mail, Safari, etc.) Of course, they are in use by the system - due to the nature that they are indeed "loaded" into the OS.
In terms of what I've done to try and fix this myself, I've done the following:
• I occasionally run AppleJack
• I've used Apple's *Font Book* to verify all fonts and check for duplicate fonts - all dupes are turned-off.
• I've deleted most every non-US English font typeface the system had, especially any/all of the Asian dialect fonts
Can anyone suggest a solution? Thank you in advance - I love these forums, they are always most helpful!

Latest developments:
The problem seems to have been corrected - that's the good news. The bad? I'm not sure what exactly fixed it; this is what I did:
I ran CHKDSK from within BootCamp. Everything checked-out just fine. Of note, XP crashed from a "stable" desktop after I changed the security settings on a JPG file. I know there isn't a correlation at all here - that JPG file didn't exist when this problem began occurring weeks ago.
I think the fix was deleting some font files - not from within Font Book - but directly from the user font directory; path and fonts as follows:
Mac HD > Users > UserName > Library > Fonts >
the following four fonts were deleted:
MS Gothic.ttf
MS Mincho.ttf
MS PGothic.ttf
MS PMincho.ttf
After several restarts - from into and out BootCamp AND into and out of a few other user accounts, returning to my main login account (running as Admin) the "Recovered Files" folder did NOT appear in the trash, of course, neither did any fonts.
Lastly, I ran OnyX and deleted (fully) the trash - it found a few items from other user accounts, deleted all of that garbage (what ever it was) before deleting the aforementioned fonts.
In retrospect, I suspect the origin my have been simply a corrupted font such that FontBook didn't catch the problematic font. It subsequently corrupted one or more of my custom font lists from within FontBook. I trashed those custom lists the other night, but the problem persisted...
So - cumulatively, something did the trick.
Case closed for now.

Oracle 10g not releasing space after delting the records

Hello
We have a tool which uses Oracle 10g as database. We have been deleting records from the tool and the table space does not show any improvements in the free space. When we have taken the dump and recreated the schema all the unused space is visible. Before recreating the schema database was showing 17.5 GB after recreatig it has hardly 1G which is real. Clearly this is not recommended on a production environemt. Please suggest.

By performing DELETE operations you will not get back the used space. Extents are still allocated to the segments. To free unused extents you may have to do one of the following:
1) move table within the same tablespace
2) shrink the table
3) exp/imp
.......

Can't login to Mac Pro after every restart

Hi all,
For 5 days I've not been able to log into my computer at work after its been restarted/gone to sleep. The IT guys have had to do all kinds of stuff to get it working again. And every time we think it's fixed, I've come in the next morning and have the same problem, can't login.
I've eliminated that its my login details as I was able to login on another machine just fine. And others can't login to my computer, so it's obviously an issue with my machine/OS.
Does anyone have any ideas of why this would keep happening? It's as if something keeps resetting after each restart that then won't allow anyone else to login. This is all I can think of, but honestly have no idea. Any suggestions or help would be greatly appreciated as its really frustrating and putting me very behind on my work. Thank you!
Btw, it's a Mac Pro duel quad core, 16GB ram, OS 10.6.7 I believe.
Also, the admin and root can login, just not any other accounts. So the computer can be accessed, but not thru my or any other accounts on the network.

Hey there.
Well, I figured out what is causing my problem. It's Mobile accounts. I started fresh with a new install and a standard Active Directory account (not Mobile). I authenticated 20+ times. Rebooted at least 10 times. Everything worked great. Then I decided to create the Mobile account. That's when everything broke again. My Active Directory account was getting locked after one accurate attempt to authenticate. When IT unlocked it I could go one step further but then would lock me out the next time I tried to authenticate. I've replicated this twice.
So for me, it's clearly a Mobile account problem. Which is bad because half of the Macs under my care are notebooks.
Please let me know what you find out on your end.
Thanks,
Adam

Oracle 10g Listener Port Changes after every Restart

Similar Messages

Maybe you are looking for