Oracle 10G on Win XP

I would like to know where can I find the instruction to install Oracle 10G on a Win XP machine. I have the following disk:
1. - Oracle DB 10G Rel 3 (10.1.0.2) Windows 32 Bits
2. - Oracle 10G Client
And I would like to know if I need to install both disks. I'm developments that also do DBD roles.
Thanks!

I think you might find that in the "Quick Installation Guide for Microsoft Windows" at
http://www.oracle.com/pls/db102/portal.portal_db?selected=1 (for 10gR2) or
http://otn.oracle.com/pls/db10g/portal.portal_demo3?selected=1 (for 10gR1)
<g>

Similar Messages

What i need to have to run oracle 10g on win 2000 server.

hi,
I want to install oracle 10g on win 2000 server,what should I need to do to install oracle 10g.
thanks Alok kumar

Hi...
Try check http://tahiti.oracle.com
There are complete documentation and also installation guide for Windows where pre-requisites are included.

Connect to MS SQL SERVER FROM ORACLE 10G(OS- WIN XP)

HI
I NEED TO ACCESS MS SQL SERVER DATABASE FROM ORALCE 10G(OS -WIN XP)
SOLUTION PLZ?
Edited by: X7C7 on Nov 26, 2008 11:47 AM

http://download.oracle.com/docs/cd/B19306_01/gateways.102/b14270/ch2.htm#sthref35
HTH...

Oracle 10g on Win Vista, XP

Hi,
Could anyone please let me know if I can install Oracle 10g on the following Operating Systems:-
1) windows XP Home Edition with Service Pack 2
2) Windows Vista Home Premimum ?????
Please let me know.
Thanks

Maybe you can,maybe you cannot. Home Editions are NOT supported . By the way, Oracle provides installation guides, where you can find such informations.
Werner

Oracle 10g on Win Xp, dba starts with system.

Hi
Do you know initialization parameter?
Where can I change that dba won't startup whith Win Xp system?
Thx

val75 wrote:
Hi
Do you know initialization parameter?
Where can I change that dba won't startup whith Win Xp system?
DBA or db ? You can use oradim to control the database instance startup with the service startup. Please read,
http://download.oracle.com/docs/cd/E11882_01/win.112/e10845/create.htm#NTQRF05011
HTH
Aman....

Oracle 10g problem on win 2000 server!!

Hi,
I have installed oracle 10g on win 2000 server with service pack 4 to my home machine but the problem I am facing is that when I start my db on the system my system gets slow it consumes most of the Ram.I alter few SGA parameters in init.ora file but the problem continues to be effect me.I need to get around that problem asap hope you guys help me as u did in past....
thanks a lot...

Hi,
It's 128MB should i expand it? or what abt oracle 9i if i uninstall of oralce 10g.act I was earlier using oralce 9i.I would like to know that all the commands which used to support to oracle 9i will it support completly to 10g.
thanks a lot..

Oracle 10g test failure

i have succefully installed the oracle 10g onto win xp which is acting as a server and the client system on to another machine which is also running win xp. I am new to oracle, pls help me configure this.
on my server, with the use of net manager, i have the following settings :
under service-names i got a connection known as "extproc_connection_data", with sid as "PLSExtProc" connection type as "database default" and in the address configuration the protocal as "ipc" and key name "EXTPROC" and the same in "LISTENER" with an additional address as "localhost" and key as "EXTPROC"
I guess this is the default settings. but how can i make the connection with a database success. when i test the sysem is get an error like "ora-28547 connection to server failed, probable net8 admin error"
thanks in advance

Hi, on the server, use net8 net manager / local /listener create a listening location TCP/IP port 1521.
next listener / database service /add database name/sid
save.
On the client update TNSNAMES.ORA throught net manager to connect to your hostname on TCP/IP 1521 name/sid
bye

How to install Oracle 10g ODBC driver for win 64 bit?

I need to install Oracle 10g ODBC driver for win 64 bit, I donot know how to do that,
where to find the driver....
The driver 10.1.0.5.0 25-Apr-2006 2.1 MB isnot for 64 bits Win server 2003.

Dear Sir,
Yes, you can find the Driver here
http://www.oracle.com/technology/software/tech/windows/odbc/index.html

My Oracle 10g XE does not start anymore on Win XP

Hello,
I have a problem I do not understand at all. I've successfully installed Oracle10g XE on my Win XP SP2 about one year ago and every works well.
The last time (6 months ago) I've started my default XE, it works well.
Today, it does not works anymore ! My Windows service called "OracleServiceXE" does not start anymore. I have an error 1053.
So I try to start manually my DB using sqlplus :
sqlplus /nolog
connect / AS SYSDBA=> I obtains ORA-12560
The listener service starts well and seems to be OK.
I tried to set ORACLE_HOME and ORACLE_SID without success.
I checked my sqlnet.ora, tnsname.ora. Everything seems to be OK.
I stopped my antivirus software, stopped my firewall.
I checked I am still in the Adminstrator Group.
Finally, I tried to reinstall Oracle 10g XE and it does not work anymore either ! The XE instance creation failed
DIM-00019: service creation error
O/S-Error: (OS 1053)
Now, I am lost.
Does anybody have any suggestion to solve my problem ?
Many thanks by advance for any help you could give.
Regards
Cedric

Yes, I think so.
But what ? Many things change in 6 months (Windows fixes, software fixes, RAM upgrade, screen change ...)
And the logs I found in oracle cannot help me to have an idea.
Only listener.log, css.log and sqlnet.log have changed.
I have found the following error in sqlnet.log :
Fatal NI connect error 12560, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleXE)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=XE)(CID=(PROGRAM=E:\Langage\oraclexe\app\oracle\product\10.2.0\server\BIN\oradim.exe)(HOST=PHOENIX)(USER=gerardce))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 09-FÉVR.-2008 09:28:04
Tracing not turned on.
Tns error struct:
ns main err code: 12560
TNS-12560: TNS : erreur d'adaptateur de protocole
ns secondary err code: 0
nt main err code: 530
TNS-00530: Erreur d'adaptateur de protocole
nt secondary err code: 2
nt OS err code: 0
I really don't knwo where to start. And I would like to be sure to save my data (via export or something like that).
Is it possible to have more trace somewhere that can help me ?
Regards,
Cedric

Cannot install Oracle 10g rel. 2 on Win Server 2003 SB

Hello,
I cannot install Oracle 10g rel. 2 on Win Server 2003 SB, because when the the configuration assistant installer try to copy the db files, it stop with the following errors:
ORA-24324 Service Handle not Initialized
ORA-24323 Value not authorized
ORA-28547 Connection to Server failed probable Oracle NET ADMIN errorRegards
Siyavuş

You should be connected as a local administrator to perform the install process.
Try to perfom a software only install, then once you make sure the installation was successful, launch the dbca. It is important for you to use a local account to perform the installation and db setup process, otherwise, if you have authentication problems, even if you comment the authentication line at the sqlnet.ora file you will be facing issues that will make fail the assistant, since it is designed to work assuming the user is OS authenticated.
~ Madrid
http://hrivera99.blogspot.com/

Oracle 10g Express Edition doesn't works on Win SBS 2011

Deutsch
Hallo zusammen!
Ich ein kleines Problem mit der Installation von Oracle 10g Express Edition Release 10.2.0.1.0. Zuerst, ich muss die ältere Version nehmen, weil das Programm welches dann auf Oracle zugreift sehr „sensibel“ ist und wohlmöglich mit der neueren Version 11g nicht klar kommt.
Die Version 10g habe ich nun auf einen Server mit Windows SBS 2011 Essentials SP1 64-Bit installiert. Doch leider bekomme ich nach der Installation keinen Zugriff zum Localhost 127.0.0.1:8080/apex. Weder mit IE noch mit Firefox.
Meine Frage wäre funktioniert die Version 10g auf Windows SBS 2011 mit 64-bit überhaupt und falls ja, wo müsste man eventuell in Windows noch etwas einstellen damit man Zugriff auf 127.0.0.1:8080/apex hat?
Vielen Dank vorab!
English
Hello at all!
I’ve some problems with the installation of Oracle 10g Express Edition Release 10.2.0.1.0. At first i must take the old version of Oracle, because the program which needs Oracle ist very “sensitive” and i fear this program doesn’t cope with the new version.
So i install the version 10g on a server with Windows SBS 2011 Essentials SP1 64-Bit. Unfortunately i don't get an access to the localhost 127.0.0.1:8080/apex. I try it with IE and Firefox.
My question is does Oracle 10g works on Windows SBS 2011 64-bit and if yes, is there any setting to do on Windows to get the an access to 127.0.0.1:8080/apex?
Thank!

does Oracle 10g works on Windows SBS 2011 64-bitYou can see supported OSes in System Requirements for Windows platforms.
As always, not certified does not necessarily mean it won't work, but if you have problems...

Win XP install oracle 10g fails

Just try to install oracle 10g on my XP prof. It fails.
Whenever I run autorun\autorun.exe the menu show up, but when I click the install/uninstall link, it just die. Nothing happens.
When I go to Disk1, run the setup, it first prompt me some Basic installation, I filled in, but when I click next begin to install, in the middle of the installatio, it dies.
I have no idea what's going on.
Does anybody have the same problem?

I have just posted another question on this very topic - guess I should've searched the forum properly.
I have deleted a whole bunch of registry keys from Oracle 9i installation, according to the list I found on one of the documentation. I must've missed something though, especially since 10g refuses to install.
Can you please point me to the list of oracle keys in registry? I might have missed something.
Cheers,
Dany.

How to connect oracle 10g XE client to XEserver on win XP

Hi ,
i am using oracle 10g express edition. i installed oracle 10 xe server it is working fine but how can i connect oracle 10g xe client to this server becouse there is no net configuaration nad Migration tools and also net configuation Assistant . can you explain
Regards,
Dharmendra

The computer running XE server does not need a client installed.
If you are trying to connect from another computer, install the XE client and create file C:\XEClient\NETWORK\ADMIN\TNSNAMES.ORA with the following contents (replace ip_address as appropriate):
XE =
    (DESCRIPTION =
       (ADDRESS_LIST =
          (ADDRESS = (PROTOCOL = TCP)(HOST = ip_address)(PORT = 1521))
       (CONNECT_DATA =
          (SERVICE_NAME = XE)
{code}Test with
{code:java}
sqlplus SYSTEM/password@XE
{code}
Regards,
Georger
wrote:user_7000018
Hi ,
i am using oracle 10g express edition. i installed oracle 10 xe server it is working fine but how can i connect oracle 10g xe client to this server becouse there is no net configuaration nad Migration tools and also net configuation Assistant . can you explain
Regards,
Dharmendra

Oracle 10G Non-Network install - OEM will not start when on the LAN.

Greetings,
Got through a non-networked 10G Enterprise installation OK; I chose to create the orcl schema, connected to it through various utilities, added new tablespace, and all was well. I also checked my Host Name by pinging it in DOS, it showed me the IP address of the MS loopback adapter which is what I was expecting.
Once I connected the same machine to the LAN (and internet) and re-booted, for some reason the Host Name was now assigned the dynamic IP address of the LAN and not LAN2 (which is the loopback adapter that is assigned a static local IP address). It did this even though I had already added an entry in the /etc/hosts file that explicitly assigns a static IP address to the Host Name (as recommended in the Oracle 10G pre-installation instructions). I also could not get the OEM to launch a webpage, run and connect to the orcl database after the re-boot; I am wondering if this is related to the IP address assigned to Host Name changing; maybe the Oracle agent can no longer resolve the URL for some reason?
In the end I find that the only way to insure I can have a working Oracle environment and be on an active network at the same time, is to bring up the Oracle environment on a standalone system first, and once Oracle is running connect the system to the network. Is there no way to automate this process?
The format of the hosts file entry recommended by the Oracle 10G pre-installation instructions is as follows:
===========================================================
IP_address hostname.domainname hostname
where:
IP_address is the non-routable IP address you entered for the loopback adapter.
hostname is the name of the computer.
domainname is the name of the domain.
For example:
10.10.10.10 mycomputer.mydomain.com mycomputer
==========================================================
In my case since I am not part of a Windows domain (but am part of a Windows Workgroup), I added an entry in the /etc/host file that looks like the following:
# Copyright (c) 1993-1999 Microsoft Corp.
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
# For example:
# 102.54.94.97 rhino.acme.com # source server
# 38.25.63.10 x.acme.com # x client host
127.0.0.1 localhost
192.168.110.250 IBM-6AB1330E158
==> Note that I did not add the domain name to the entry I created since I am not part of a domain, I also used the format I found in the etc/hosts file which is:
IP_address hostname.domainname
- not -
IP_address hostname.domainname hostname
Which is the format recommended in the Oracle 10G pre-installation instructions; this does leave me wondering which format is correct...
Thanks in Advance for any help,
ADG13

I have not. I am hoping someone (maybe even from Oracle support) will step up and officially tell us we are either right or wrong in the way we are approaching this. From the research I have done on the internet it sounds like this should work, you should be able to have Oracle starting and running fine whether you boot connected to the LAN or not, assuming you have created the MS loopback adapter, assigned it a static IP, and changed the hostname entry in etc/hosts file as part of the 10G WinXP recommended pre-installation instructions.
And yet I find I have to start Oracle when I am not connected to the LAN or the services will not start correctly. If this is a "feature" then hopefully someone will tell us and maybe give us a workaround or give us an idea if this will be addressed in a future release. Having said that and in fairness to the Oracle product; being a developer I have other products installed on my machine that have special networking setup needs also, and in my case this could be exasperating or even possibly causing this Oracle problem I am having. To be specific I have software for 2 different VPNs installed so I can tunnel into 2 private networks. One of these VPNs require me to make use of a DNS Suffix (as shown below) which might be contributing to my problems, not sure. I also have VMWare installed which uses it own network adapters when it is running, so you can see how things could get a little hairy... at any rate, there is my 2 cents worth (or is that 5 cents? : )
fwiw,
ADG13
C:\Documents and Settings\Administrator>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : IBM-6AB1330E158
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : ibm.com
Ethernet adapter Local Area Connection 2:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Loopback Adapter
Physical Address. . . . . . . . . : 02-00-4C-4F-4F-50
Dhcp Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.110.250
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : ibm.com
Description . . . . . . . . . . . . . : Intel(R) PRO/1000 MT Mobile Connection
Physical Address. . . . . . . . . : 00-11-25-13-96-AF
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.1.102
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DNS Servers . . . . . . . . . . . : 65.24.7.3
Lease Obtained. . . . . . . . . . : Wednesday, January 11, 2006 3:40:08 AM
Lease Expires . . . . . . . . . . : Thursday, January 12, 2006 3:40:08 AM
Ethernet adapter AGN Virtual Network Adapter:
Connection-specific DNS Suffix . : ibm.com
Description . . . . . . . . . . . : AGN Virtual Network Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-01
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 9.49.217.159
Subnet Mask . . . . . . . . . . . : 255.255.255.255
Default Gateway . . . . . . . . . :
DHCP Server . . . . . . . . . . . : 9.49.217.159
DNS Servers . . . . . . . . . . . : 9.0.2.1
9.0.3.1
Lease Obtained. . . . . . . . . . : Wednesday, January 11, 2006 8:06:20 AM
Lease Expires . . . . . . . . . . : Monday, January 18, 2038 10:14:07 PM

Hanging with Oracle 10g release 2 on Windows XP !!!

Hi,
I am trying to Install Oracle 10g release 2(10.2.0.1.0) on Windows XP Professional(SP2).
Existing environment:
1. Java(SDK & Runtime Environment) 6 update 1.
2. Configured Eclipse.
The installed procedure:
1. Downloaded "10201_database_win32.zip" from Oracle website.
2. Unzip it and run setup.exe
3. It gives an error like below :
"javaw.exe - Entry Point Not Found"
"The procedure entry point longjmp could not be located in the dynnamik link library orauts.dll."
Installation completed(forcefully) without the below.
1. Oracle Net Configuration Assistant (Failed)
2. Oracle Database Configuration Assistant (Failed).
and in services: "No Oracle process exist".
I tried the below:
A. Change the environment variables (remove ORACLE_HOME/ORACLE_SID etc)
B. 2 to 5 times un-install oracle(including registry, directory etc) and install.
C. Uninstall Java SDK & Runtime Env. Then install Oracle.
D. Installing Personal edition, Enterprise edition etc etc.
E. Checked the orauts.dll in 3 places(i. BIN ii. out/bin iii. oui/lib/win32
F. Copied the orauts.dll to system32 directory.
What ever I do the above appers all the time and installation is incomplete.
Due to this problem I couldn't move further, please do help me in solving this.
Thanks a lot in advance.

Hey Guys,
I am Srinivas Here who had been trying to install Oracle Database 10G on Windows X86 on Windows XP Professional.
If you have Win-XP Professional as your Operating System. Do not download the oracle Database using windows - XP Professional because XP will block certain installation files while downloading. In your machine install Windows 2000 or any other Windows version as a dual boot. First the download Database Zip files using your other version of Windows Operating system and then when you Unzip the files it will create a folder called Database and all the files will be present in it.If you want to store the same to cd for having to install the 10G Rel 2 database through CD then copy the contents of the unzipped database folder and store only the contents of the database folder and write them to CD's. Please see to it that while writing on cd's do not copy the folder itself .
After this, restart the system and get into windows XP Professional (Your XP Professional should be with Service Pack 2 in order to install 10G Database on windows XP - The Basic requirements for Oracle Database 10G on Windows X86).
I request you to check the software and hardware requirements from oracle Documents before you install the Oracle Database 10G on Windows x86 as well as Oracle Database 10G on Linux X86 or any other operating systems.
Finally, After you run the Oracle Universal installer in the last you will get messages for all products installed Success and finally it will ask the password for DBA and open the password management and give the password and reenter password and on the left you will have to unlock the items you would like to use.
In the last it will give you various URL links for Isqlplus, DBA, Enterprise Manager and a log report stored into oracle directory stored in your C:\Program files\Oracle folders. The correct link will be given at the end and you will have to watch the installation carefully.You can find DBCA and other options working. Try login in to Oracle through Command prompt, Sqlplus prompt availabe in Start ->Programs->Orahome10G->application Development-sqlplus as well as login through isqlplus link- Before this you should login at the command prompt as SYSDBA. YOU CAN SEE THAT YOUR DATABASE IS NOW WORKING IN WINDOWS XP PROFESSIONAL.
THANKS IN ADVANCE TO ALL FORUM MEMBERS WHO GAVE ME IDEA AND SUPPORT
REGARDS,
SRINIVAS

Oracle 10G on Win XP

Similar Messages

Maybe you are looking for