Oracle 10g on Windows 2008 Server Std. edition

Hi all
We create two partitions C 80 Gb, D 300 GB on HP Server XEON Dual Processor with 6GB installed with Windows 2008 Std. Edition server 32 Bit
We try to install Oracle 10g 32 Bit - We get the following problems
a) By default it should take the highest partion i.e d:\oracle\product etc.
but it takes c:\users\administrator\documnets\oracle\product which is wrong
However we correct it by typing the correct path. Brows does not take to D partition
b) On proceeding further - >Installation aborts and and we get messages
unknowkn , unknown etc. for 3-4 aspects.
Windows 2008 server has service pack 1 installed. We installed Service Pack 2 also but without any benefit. Further we also tried to install after removing all firewall , anitvirus etc. but again of no use.
User connected was administrator while installation of Oracle 10g 32 Windows.
We never get any problem with the same CD /Dump on Windows XP, Windows 2003 Server
Kindly suggest some remedy
Suresh Bansal

With due respect i wish to request you to please see below thread:
Re: Oracle 10g
Which is making me confused.
Regards
Girish Sharma
There's a specific version for Windows 2008 (10.2.0.4), ready to download:
http://www.oracle.com/technology/software/products/database/index.html Reply by Werner

Similar Messages

Error: SAP installation of ERP Sr3 with ORACLE 10g on Windows 2008 server

Dear all,
while installaing SAP ERP SR3 with ORACLE 10g on windows 2008 server...
we are getting error as not support.
please confirm wether this version of OS is uspported or not.
thanking you in all,
by
Animesh

actualy we tried to change Oraparam.ini file in the installation folder...
edited ... windows= 5.0, 5.1, 6.0
we had entered 6.0
Yes - that is necessary.
and started ... but after starting we are getting ERROR like unKNOWN and installation popup (OUI popup) exiting with .. error popup.
Yes - because Oracle delivers its own Java version - which is too old to run on Windows 2008.
if you suggest us to use 2003 64 bit for temporaray .... purpose.
and is there any specified procedure to UPgrade OS.
like... DB should be updated before OS upgradation.
You can run 10.2.0.4 on Windows 2003 x64 nicely and upgrade to Windows 2008. Since there is no "upgrade" (it is the highest version supported) there´s no need to do anything.
The question you have to ask is:
Why do you need Windows 2008? Is there any technical implication?
Markus

Install Oracle 10g on windows 2008 Server 64bit

Is it possible to install Oracle 10g on Windows 2008 64bit . I read one post below it says , windows 2008 is not certified for oracle 10g ..
windows server 2008 Oracle 10G 64 bit
before I installed 32bit , it is throwing error message on alert log file on every 5 seconds.
"OER 7451 in Load Indicator : Error Code = OSD-04500: illegal option specified
O/S-Error: (OS 1) Incorrect function. ! "
if it is possible which version I want to download is best ..
and what is the recommendation whether it is 10g or 11g

You mean to say Oracle 10g 64bit will not work in Windows 2008..?No, i meaned the post you linked was written in year 2008, in that year it's was a unsupported platform for that oracle version. Actually its supported and you can install it.
Furthermore like Aman told you, It's more recommended install 11gR2 version
Edited by: Fran on 29-may-2012 4:20

Can't install oracle 10g on windows 2008 R2

Please help me
I want install oracle 10g on windows 2008 R2 but can't install because I don't have file install oracle_10.2.0.4 and i can't download file from oracle.com
and oracle 11g i not license
Where can download file oracle install 10.2.0.4
thank you

user9357585 wrote:
same issue here. I need 10.2.0.3.0 with install software to bring a legacy sid over onto new server hardware that will not support Win 2003. I have Win 2008 32bit loaded and just need the software install ruitine to make the move. My legacy 10g server running on older hardware and Win 2003 works, but is now uncompliant with IA requirements now. We are sandboxing this application. My new server will need to have 2008 on it.
Will Oracle supply me the software. I have paid maintenace on my account every year. Just paid it for this year in Ocober. Should not have an issue here.submit a Service Request & you'll get your question answered

Windows 2008 Server Std on T500

Hi. Is there anyway to install Windows 2008 Server Std. on a T500 with Windows 7 installed? We've tried to install it and the drivers are all screwed up -- the network, video, and other "base" drivers are all missing. We tried using the Vista and XP ethernet adapter drivers and it wouldn't take them.
Has anyone done this successfully? Any instructions anywhere? Thanks.

Hi Gerem..
please, have you resolved your problem, ? ru still using 2008 R2 ?
I need soem suggestion and help, iam planing to buy New 15" MBP non retina 2012 model,
i want to install 64-bit 2008 R2 as i have some Active directory DNS setup,
will it support to install via boot camp,
can we install with out bootcamp ? i mean Directly by partition the HDD ?
i dont want to use R2 in mac osx by parllels or Vmware !!
i amt to use full my Hardware 16GB and Quadcore,
can you guide me how to avhive me Thanks a lot !!

Installation of oracle 10g by window 2000 Server or Window XP professional

Dear all
Did you tried installatin of oracle 10g in Window 2000 Server and/or Window XP professional
installation on which one will be more reliable and stable?
As I am choosing which OS will be better as a Server
please help
Francis SZE

I don't think XP professional would be recommended as server.
would be better if you use 2000 Server or best if you use 2003 if you like windows environment
cheers

Oracle Express and Windows 2008 Server

I successfully installed the Oracle Database 10g Express Edition on our new Windows 2008 Server. However, after install I can not open the Database Home Page in IE 7.0? The problem description I get when I click on the Diagnose Connection is "127.0.0.1" is not set up to establish a connection on port "8080" on this computer.
The server is also a domain controller, DNS server and DHCP server.
Is this version compatible with Windows 2008 Server?
Is it a DNS problem or may be a security problem?
Heinrich

I have not tried it on Windows 2008. But the challenges with your configuration could be endless. Here are some common issues:
1) XE must be installed by a local machine administrator, not a domain administrator
2) XE requires several ports (1521, 8080)
3) Firewalls and antivirus are known to crash the install
4) Often 3) will block the installation of the database
Note that XE does not use any form of HTTP listener - the database listener does the bassic work and passes HTTP requests into the database. So no Apache or IIS requires with XE.

Error : Oracle 10g with windows 2008

Hello Experts,
We are installing Solution manager 4.0 on windows 2008 with oracle 10g(10.0.2.0)
It shows "checking operating system version must be 5.1 or 5.2 actual 6.0.
<<<<<Failed".
If orcle 10g for windows 2008 is available on the sap marketplace, please provide us the link for that.
Please recommend any other oracle version compatible to the windows 2008 fro solution manager 4.0.
We have exiting system landscape production server on windows 2003 with oracle 10g Is it compatible with the windows 2008 with oracle 10g?
Thanks & Regards,
Abha

> Please recommend any other oracle version compatible to the windows 2008 fro solution manager 4.0.
Read
Note 1303262 - Oracle on Windows Server 2008
You have to also patch your sapinst.
Markus

Install Oracle 10g on Windows 2003 Server cluster (MSCS)

Hi all
How do I install Oracle 10g on Windows 2000 cluster (MSCS installed)?
I have a 2-nodes Microsoft windows 2003 server cluster and I want to install Oracle 10g,
Do I folloow this order:
1. Install the software on both without the database
2. Create the database from the first node
in this case, The second node can see the database as it is available?,
and what about the IP adresses?
If you can point me to some documentation, or help in any way, I would appreciate it.
Thanks for any help.

Read here...
http://download.oracle.com/docs/html/A96685_01/intro.htm
>>
Oracle Fail Safe comprises multiple components: Oracle Fail Safe Manager, Oracle Services for MSCS, and server components specific to Oracle Fail Safe.
>>
So I don't know how you can achieve this without Fail Safe.
There might be other link which I cannot find right now.

Connect to DB2 from oracle 11g on windows 2008 server

Hi Folks,
I want to conenct to DB2 from oracle 11g using DB link.
DB2 :
user : db2user
pwd : db2pwd
database : db2database (OSBLDEV)
able to connect to db2 server (installed on machine M1) using db2 client with above details from machine M2 (where oracle is installed).
Oracle :
user : orauser
pwd : orapwd
host : orahost
port : 1521
service : oraservice
able to connect to oracle server using oracle sql developer with above details on Machine M2 (windows 2008 server)
when i execute the query with database link
select row_id from siebel.s_org_ext@OSBLDEV;
I get the message : ORA-12154: TNS:could not resolve the connect identifier specified.
could you pls check and let me know whether the below enteries are correct or not.
Pls share if you have step by step connectivity from DB2 to oracle using DB link.
1. I have created the Data source for DB2 - test successful
create database link OSBLDEV
connect to "db2user"
identified by "ldb2pwd"
using 'OSBLDEV';
1. I have made the following entry in E:\oracle\product\11.1.0\db_1\hs\admin\initosbldev.ora
HS_FDS_CONNECT_INFO = OSBLDEV
HS_FDS_TRACE_LEVEL = 0
2. I have made the following entry in E:\oracle\product\11.1.0\db_1\NETWORK\ADMIN\tnsnames.ora
OSBLDEV =
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=orahost)(PORT=1521))
(CONNECT_DATA=(SID=OSBLDEV))
(HS=OK)
3. I have made the following entry in E:\oracle\product\11.1.0\db_1\NETWORK\ADMIN\listener.ora and releoaded the listner (lsnrctl reload)
LISTENER =
(ADDRESS_LIST=
(ADDRESS=(PROTOCOL=tcp)(HOST=orahost)(PORT=1521))
(ADDRESS=(PROTOCOL=ipc)(KEY=PNPKEY)))
SID_LIST_LISTENER=
(SID_LIST=
     (SID_DESC = # this is the entry for HSODBC
     (SID_NAME = OSBLDEV)
     (ORACLE_HOME = e:\oracle\product\11.1.0\db_1)
     (PROGRAM = hsodbc)
Thanks in advance.

1. My listener.ora is placed at the below location:
E:\oracle\product\11.1.0\db_1\NETWORK\ADMIN
2. I have modifed the listener and removed the entry - hsodbc
3. stop and start the listener.
still can't see the service entry in listener status.
C:\>lsnrctl status
LSNRCTL for 64-bit Windows: Version 11.1.0.7.0 - Production on 19-JUL-2010 02:27
:08
Copyright (c) 1991, 2008, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 64-bit Windows: Version 11.1.0.7.0 - Produ
ction
Start Date 19-JUL-2010 02:21:17
Uptime 0 days 0 hr. 5 min. 52 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Log File e:\oracle\diag\tnslsnr\DALDEVDBCRM1\listener\alert\log
.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=daldevdbcrm1.corp.nai.org)(PORT=1521
Services Summary...
Service "+ASM" has 1 instance(s).
Instance "+asm1", status READY, has 1 handler(s) for this service...
Service "+ASM_XPT" has 1 instance(s).
Instance "+asm1", status READY, has 1 handler(s) for this service...
Service "ARIBADEV" has 1 instance(s).
Instance "ariba", status READY, has 1 handler(s) for this service...
Service "ARIBADEV_XPT" has 1 instance(s).
Instance "ariba", status READY, has 1 handler(s) for this service...
Service "ARIBAXDB" has 1 instance(s).
Instance "ariba", status READY, has 1 handler(s) for this service...
Service "aiad.corp.nai.org" has 2 instance(s).
Instance "aiad1", status READY, has 2 handler(s) for this service...
Instance "aiad2", status READY, has 1 handler(s) for this service...
Service "aiadXDB.corp.nai.org" has 2 instance(s).
Instance "aiad1", status READY, has 1 handler(s) for this service...
Instance "aiad2", status READY, has 1 handler(s) for this service...
Service "aiad_XPT.corp.nai.org" has 2 instance(s).
Instance "aiad1", status READY, has 2 handler(s) for this service...
Instance "aiad2", status READY, has 1 handler(s) for this service...
Service "aianew" has 1 instance(s).
Instance "aianew", status READY, has 1 handler(s) for this service...
Service "aianewXDB" has 1 instance(s).
Instance "aianew", status READY, has 1 handler(s) for this service...
Service "aianew_XPT" has 1 instance(s).
Instance "aianew", status READY, has 1 handler(s) for this service...
The command completed successfully
C:\>

Dataguard installation oracle 11gr2 on windows 2008 server

Hi,
I have oracle 11gr2 database on windows 2008 server. I have been given a primary and secondary server with the same setup.
Now i want to install dataguard. AFter installing i need to test it for disaster recovery.
Can anyone please suggest me a document for this? I searched in this forum but i couldnt get any.
Please help.

An obvious place to look at is our Online Documentation about Data Guard Installation:
http://download.oracle.com/docs/cd/E11882_01/server.112/e17022/toc.htm
See
3 Creating a Physical Standby Database
there.
There is not much special-Windows for Data Guard - of course you need to create Windows Services for both Databases etc. as described here:
http://www.oracle.com/pls/db112/portal.portal_db?selected=11&frame=#microsoft_windows_installation_guides
Kind regards
Uwe Hesse
http://uhesse.wordpress.com

Install oracle 10g on windows 2003 server issues

I am very new to oracle
I installed oracle 10g release 2 Enterprise Edition on a Win 2003 Server.
I got all oracle services running after install
But I can not connect to the database from another machine which is on the same domain
I set USE_SHARED_SOCKET =TRUE under HKEY_LOCAL_MACHINE/Software/Oracle/HOME
(as I learned from the forum)
I turned off windows firewall (or with the firewall turned on add port 1521 to Exceptions list) .
I restarted listener serivces and I even reboot the machine Still I can not connect to the database from another machine.
What am doing wrong here?
We are on a tight schedule now any help will be very appriciated.

Firewall-related problems normally throw ORA-12535, not ORA-12170 (the message a timeout occurred is the same). Description for this error is:
Error:     ORA-12170 (ORA-12170)
Text:     TNS:Connect timeout occurred
Cause:     The server shut down because connection establishment with a
     client failed to complete within the allotted time interval. This
     may be a result of network/system delays; or this may indicate
     that a malicious client is trying to cause a Denial of Service
     attack on the server.
Action:     If the error occurred because of a slow network/system,
     reconfigure the SQLNET.INBOUND_CONNECT_TIMEOUT parameter in
     sqlnet.ora to a larger value. If a malicious client is suspected,
     use the address in sqlnet.log to identify the source and restrict
     access. Note that logged addresses may not be reliable as they can
     be forged (e.g. in TCP/IP).
Hostname in listener.ora has a domain included, while in tnsnames.ora has not. Y Can you ping the host? Does tnsping work? To get more detailed informations you may turn on tracing on the client side (in sqlnet.ora) and the server sid (in listener.ora).
Werner

Installing oracle 10g on windows 2000 server

hi masters,
this might look very silly question, and every child might know answer, but i would like to ask this question here that
i have oracle 9i release 2 installed on my windows server 2000 and an application is already running, now i want to install oracle 10g on same machine...
but when i try to launch oracle universal installer, it fails to launch it....whay is this so??? do i need to adjust some parameters to install it????
can anyone provide a checklist to check??i have an antivirus installed on machine...
any suggestion will be appreciable
thanks and regards
VD

got my answer, you can follow this step.
on windows 2000 server while launching oracle universal installer, due to jre bug (noted in metalink 266617.1 doc and 393070.1) installer CMD prompt launch and disapper in a while... so run following command on command prompt
to resolve the issue.. change directory path according to your directory structure.
change directory to your oracle installation setup.exe directory and execute following command
C:\>\backup\SoftwareBackup\Database10g\database\install\oui.exe -J-Dsun.java2d.noddraw=truethanks and regards
VD
Edited by: vikrant dixit on Apr 21, 2009 4:47 AM
Edited by: vikrant dixit on Apr 21, 2009 4:48 AM
Edited by: vikrant dixit on Apr 21, 2009 4:50 AM

Oracle 10g and Windows 2008

I'm trying to install Oracle 10g x86 on Windows 2008 x64. Installation crashes in the beginning with the next error message:
Abnormal program termination. An internal error has occurred. Please provide the following files to Oracle Support:
"Unknown"
"Unknown"
"Unknown"
Any objections?

What do you mean when you say "I'm trying to install Oracle 10g x86 on Windows 2008 x64" You are trying to install an x86 Oracle edition on a 64 bit OS. This is not certified yet. In fact if you take a look at the certify matrix you will find that the 64 bit platform is not certified yet, but it is planned for this year.
The only available edition so far for Win2008 is x86. Patience is advisable.
~ Madrid
http://hrivera99.blogspot.com

Oracle 10g crashes Windows 2003 server (bluescreen)

Hello,
i have a problem that Oracle 10G crashes my Windows 2003 Server. All components are up-to-date and it is a certified system setup. The database worked well for months, but three days ago when our staff went to a workshop, I shut down the machine, and when we came back yesterday I just powered it up again (no changes have been done in the meantime).
The boot procedure ended up at a bluescreen, I tried two more times with the same result. I was able to deactivate many services to narrow down the error cause. It came out that the starting of the OracleDBConsoleorcl service causes the bluescreen :
BAD_POOL_CALLER 0x000000C2 (0x00000044,0x00000000,0x80000000,0x00000000) . This is re-producable, I just have to switch on that service and it will bluescreen the machine.
The strange thing is, that the OracleServiceORCL is working fine, I can even use SQL-Plus and RMAN to get to the data, but without the OracleDBConsoleorcl the Enterprise manager doesnt work anymore, and our applications also cannot connect to the database. IÂ´ve looked up the error on google, it seems to be an error in addressing memory. Anyway, the database worked fine for weeks and I wonder why I cant get it back into business anymore. Right now, iÂ´m lost. Anybody know what to do with this error ?

It turned out to be an error in the Windows 2003 OS-Kernel. Every install/uninstall of programs immediately leads to a bluescreen. Luckily, this can be solved with a hotfix from microsoft (you gotta email them to get it, it is not public yet). The corresponding article in the microsoft knowledge base is http://support.microsoft.com/default.aspx?scid=kb;en-us;888431
It will install a new ntoskrnl.exe and the problem is solved afterwards (oracle DB starts again, and also the other install/uninstall problems are solved). Hint : Boot to safe mode and then install the hotfix, if you just start the hotfix it will bluescreen right when you click onto the hotfix.

Oracle 10g on Windows 2008 Server Std. edition

Similar Messages

Maybe you are looking for