Oracle 10g on Windows - How to connect?

May be this is a small one, I dont know how to connect to sql in windows.
I installed oracle 10g on Windows XP SP3, choosing basic Installation.
Successfully Installed.
In Linux we use sqlplus '/as sysdba' to connect and we get sql> prompt.
In windows how to connect or get SQL> prompt?

You can remove the quotes. Like Unix, this only works by default if you are connected as operating system user owner of Oracle Database software installation.
C:\>sqlplus / as sysdba
SQL*Plus: Release 10.2.0.1.0 - Production on Sat Jul 24 08:54:01 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
SQL>

Similar Messages

How to uninstall oracle 10g on windows XP

Could you please tell me what are the steps involves in uninstalling the oracle 10g on windows XP.
Thanks,

1. 10g AS
OracleÂ® Application Server
Installation Guide
10g Release 2 (10.1.2) for Microsoft Windows
Part No. B14094-01
December 2004
2. 10g DB
OracleÂ® Database
Installation Guide
10g Release 1 (10.1.0.2.0) for Windows
Part No. B10130-02
September 2004

Oracle 10g on Windows 2003: instance not autostarting

I'm installing Oracle 10g (10.2.0.1) on two new Windows 2003 servers, and I'm facing the same problem, even after some full re-installations, on both of them; so this issue seems to be some kind of bug related to Oracle 10g on Windows 2003 and not just some random error.
When I run the installation it completes fine, and the database instance gets created and started without any trouble; I can connect to it using the console, the Java stand-alone Enterprise Manager, SQL Plus or anything else; it works when connecting from clients, too.
As soon as the server is rebooted, Oracle services start but it just seems the instance isn't actually started: any connection is refused by the listener which complains about not knowing the supplied instance name, and the oracle.exe process only uses about 11 MB of memory, which is a sure sign it isn't doing anything useful. The instance is configured to start, the registry keys are properly set, and everything works correclty after the installation... but stops working after the first server reboot.
I tried manually stopping and starting the services, in various orders; I tried re-installing Oracle various times; I tried deleting and re-creating the database instance, both at setup time or manually after the setup was done without creating an instance, I tried anything I could think of.
The only thing I didn't try was applying patch set 10.2.0.3 to the installation, but I just can't seem to find them, even though my company has an Oracle partnership; I find Metalink just a bit too confusing.
Can someone please help?
P.S.
The servers are actually VMWare ESX virtual servers, but I just can't imagine this to be the cause of the problem. The operating system on both servers is Windows Server 2003 Enterprise Edition (not R2), italian language, with service pack 2 and all the latest updates from Windows Update. The servers are not domain members and I'm running the installation using the local Administrator account.

I don't have a physical server available now, but I really can't even imagine how the underlying hardware, be it physical or virtual, could affect this behaviour. I'm talking about the Oracle service starting while the instance isn't, this is very unlikely to have any relationship with device drivers.

Install Oracle 10g on Windows 2003 Server cluster (MSCS)

Hi all
How do I install Oracle 10g on Windows 2000 cluster (MSCS installed)?
I have a 2-nodes Microsoft windows 2003 server cluster and I want to install Oracle 10g,
Do I folloow this order:
1. Install the software on both without the database
2. Create the database from the first node
in this case, The second node can see the database as it is available?,
and what about the IP adresses?
If you can point me to some documentation, or help in any way, I would appreciate it.
Thanks for any help.

Read here...
http://download.oracle.com/docs/html/A96685_01/intro.htm
>>
Oracle Fail Safe comprises multiple components: Oracle Fail Safe Manager, Oracle Services for MSCS, and server components specific to Oracle Fail Safe.
>>
So I don't know how you can achieve this without Fail Safe.
There might be other link which I cannot find right now.

Silent Installation of Oracle 10g on Windows XP

Hi,
I was trying out "SILENT INSTALLATION OF ORACLE 10g ON WINDOWS XP", where I was getting the following error. Can you please help me out.
COMMAND GIVEN : D:\database>d:/disk1/setup.exe -responsefile d:/disk1/response/custom.rsp -silent -nowelcome
ERROR THROWN : Starting Oracle Universal Installer...
No pre-requisite checks found in oraparam.ini, no system pre-requisite checks will be executed.
Preparing to launch Oracle Universal Installer from C:\DOCUME~1\RAVIKA~1\LOCALS~1\Temp\OraInstall2011-04-06_07-54-37AM. Please wait ... Oracle Universal Installer, Version 10.2.0.3.0 Production
Copyright (C) 1999, 2006, Oracle. All rights reserved.
You can find a log of this install session at:
C:\Program Files\Oracle\Inventory\logs\installActions2011-04-06_07-54-37AM.log
.................................................................................................... 100% Done.
SEVERE:Values for the following variables could not be obtained from the command line or response file(s):
DEP_MODE(InstallType),
TLDepModes(TopLevelInstallType)
Silent install cannot continue.
Please press Enter to exit...
So I changed the "CUSTOM.RSP" response file parameters by adding
DEP_MODE="EE"
TLDepModes="EE"
But it is still throwing me the error.
REquesting you to help me out in this case.
Thanks and REgards
Ravikanth Garimella

Pl identify exact versions of "10g" and "Windows XP". Pl also post the last 100 lines from the install log.
Pl note that Home versions of Windows are not supported - http://download.oracle.com/docs/cd/B19306_01/install.102/b14316/reqs.htm#CHDHGGFE
Pl see the Install Guide on how to use response files -
http://download.oracle.com/docs/cd/B19306_01/install.102/b14316/advance.htm#i634763
http://download.oracle.com/docs/cd/B19306_01/em.102/b16227/c_oui_appendix.htm#BABGHAIA
HTH
Srini

TNS 12549 error on installing Oracle 10g on Windows XP Home?

Hi,
I installed Oracle 10g on Windows XP Home by clicking on Disk1\install\setup (NOT Disk1\setup as instructed since that did not work). Everything seemed to go fine except towards the end of the install I got a whole bunch of errors saying that "operating system resource quota exceeded". There were options to Ignore or Abort at most of these stages. I chose Ignore and the whole install seemed to complete but I am not able to connect to the database using sqlPlus. I looked at the log files created where I saw a whole bunch of errors in several files. For example in sqlnet log, I saw this error (among others) appeneded below. It seems obvious that some resource quotas were exceeded but I am not able to figure out exactly what quotas should be increased. Any help regarding this would be greatly appreciated.
Thanks.
Sudip
===================================================
Fatal NI connect error 12549, connecting to:
(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleorcl)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=orcl)(CID=(PROGRAM=C:\oracle\product\10.1.0\db_1\bin\sqlplus.exe)(HOST=CHAKRABORTY-04)(USER=Owner))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.1.0.2.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.1.0.2.0 - Production
Time: 13-MAR-2005 18:03:25
Tracing not turned on.
Tns error struct:
ns main err code: 12549
TNS-12549: TNS:operating system resource quota exceeded
ns secondary err code: 12560
nt main err code: 519
TNS-00519: Operating system resource quota exceeded
nt secondary err code: 8
nt OS err code: 0
===================================================

XP Home is not supported, despite of this some people get oracle to work.
But in your case, possibly your machine has simply not enough resources, 12549 is a very generic error. Check the hardware requirements in the installation guide.

External table in Oracle 10g and Windows server 2003 problem

I'm having a problem accessing an external table in an Oracle 10g and Windows 2003 server environment. The disk is remote (mapped) to the server. It's the usual access errors, kup-04001 or kup-04063.
I have the [seemingly] exact same setup in an Oracle 9i and Windows 2000 server environment which works perfectly. Services run as local SYSTEM and SYSTEM has full permissions on the disk. Directories exist and so do the permissions to the directories.
In the Oracle 10g and Windows 2003 environment, services run as local SYSTEM and SYSTEM has full permissions on the mapped disk. Directories exist and so do the permissions to the directories.
This obviously effects mappings, deployments, etc.
Does anyone know if something changed in either the db or the os?
Thank you,
Michael

Thank you for your reply.
Your proposal is the standard solution. As a matter of fact, that's how it is on my "old" system. Server "A" Oracle services are started by SYSTEM. Server "B" Oracle services are started by SYSTEM and is where the flat files reside. SYSTEM has full permissions on a disk local to Server "B". Database directoriies defined on Server "A" point to Server "B" remote disk. External Tables on Server "A" are defined with directories that point to Server "B" remote (mapped) disk. I have no problems with this configuration.
I'm having a problem acheiving the same configuration with Oracle 10g and Windows 2003. I guess I'm baffled over the fact it isn't working the same way as my "old" environment. Why shouldn't it? Oracle (and you) want me to start services as a specific user. It shouldn't have to be that way unless something changed in the way the database makes calls to the os or if Microsoft slipped something in with one of it's numerous security patches.

Oracle 10g on Windows 2008 Server Std. edition

Hi all
We create two partitions C 80 Gb, D 300 GB on HP Server XEON Dual Processor with 6GB installed with Windows 2008 Std. Edition server 32 Bit
We try to install Oracle 10g 32 Bit - We get the following problems
a) By default it should take the highest partion i.e d:\oracle\product etc.
but it takes c:\users\administrator\documnets\oracle\product which is wrong
However we correct it by typing the correct path. Brows does not take to D partition
b) On proceeding further - >Installation aborts and and we get messages
unknowkn , unknown etc. for 3-4 aspects.
Windows 2008 server has service pack 1 installed. We installed Service Pack 2 also but without any benefit. Further we also tried to install after removing all firewall , anitvirus etc. but again of no use.
User connected was administrator while installation of Oracle 10g 32 Windows.
We never get any problem with the same CD /Dump on Windows XP, Windows 2003 Server
Kindly suggest some remedy
Suresh Bansal

With due respect i wish to request you to please see below thread:
Re: Oracle 10g
Which is making me confused.
Regards
Girish Sharma
There's a specific version for Windows 2008 (10.2.0.4), ready to download:
http://www.oracle.com/technology/software/products/database/index.html Reply by Werner

Imp full oracle 10G database window 2003

Hi Experts,
I made a full data based exp as
exp USERID=SYSTEM/scott@cas full=y FILE=D:\Oraclebackup\CAS\exports\casdatabase_042009.dmpLOG=D:\Oraclebackup\CLS\exports\logs\exportTables_042009.log OBJECT_CONSISTENT=Y STATISTICS=NONE
then I create a blank database with new DBname in Oracle 10G in window 32 bit 2003
I try to imp this full data exp. However I got lots of message as
importing SYSTEM's objects into SYSTEM
IMP-00061: Warning: Object type "SYSTEM"."REPCAT$_OBJECT_NULL_VECTOR" already exists with a different identifier
"CREATE TYPE "REPCAT$_OBJECT_NULL_VECTOR" TIMESTAMP '2005-10-17:13:31:32' OI"
"D '306C410305254B08A55576824763662E' AS OBJECT"
" -- type owner, name, hashcode for the type represented by null_vector"
" type_owner VARCHAR2(30),"
" type_name VARCHAR2(30),"
" type_hashcode RAW(17),"
" -- null_vector for a particular object instance"
" -- ROBJ REVISIT: should only contain the null image, and not version#"
" null_vector RAW(2000)"
IMP-00061: Warning: Object type "OLAPSYS"."ALL_OLAP2_AW_METADATA_O" already exists with a different identifier
"CREATE TYPE "ALL_OLAP2_AW_METADATA_O" TIMESTAMP '2005-10-17:13:45:23' OID '"
"B8722EEBE57D428296D658C522D2209F' AS OBJECT ("
It seems that try to duplicate system/sys objects
aslo I got message as
ORA-04052: error occurred when looking up remote object [email protected]
ORA-00604: error occurred at recursive SQL level 1
ORA-02019: connection description for remote database not found
Please let me know if you have experience for full database IMP.
Thanks,
JiM

These types of errors are expected. The problem is that types and tables are created as the database gets created. As far as I know SYS owned objects are never exported/imported, but other schema objects are exported and imported. These types of errors are generally ok since the object exists in the target database when the database is created with certain objects.
I'm not familar with this error:
ORA-04052: error occurred when looking up remote object [email protected]
Dean

Oracle 10g EE Windows Client on different machine than Pracle 10g EE server

I downloaded the Oracle 10g EE Windows Client and installed it on a WinXP (SP3) machine that had no Oracle components installed. The idea was to use it to connect to an Oracle 10g EE database running on another machine on the network.
After installing the software, what I find in the start menu is:
Oracle Client 10g Express Edition
- Go To Online Forum
- Read Documentation
- Register For Online Forum
- Run SQL Command Line
When I "Read Documentation" and go to the "Getting Started" link it talks about other menu options which I can't find ("Go To Database Home Page").
Clearly something isn't working here, but what?
Pete

This option is available on server. Not on client.
Use following link instead:
http://<server_ip_address>:8080/apex/

Oracle 10g for Windows installation - Error 1067

Hello Folks
I am trying to install Oracle 10g for Windows on my WIndows 7 Ultimate OS. Everything went fine until I rebooted and tried to run the *SQL Plus. ALthough the Listener as well as the Oracle Servide shoudl automatically start, but for some reason..they didn't. As a result, I went into the Services and tried to manually run them but to my disappointment getting the folowing error:
Windows could not start the OracleServiceORADB1 service on local computer.
Error 1067: The process terminated unexpetedly.
Any idea what went wrong..and how should I get this right?
Thanks

Pl identify the exact version of "10g" that was installed.
The only version that is supported is 10.2.0.5 - see http://download.oracle.com/docs/cd/B19306_01/relnotes.102/b14264/toc.htm#CIHCFAGA
Srini

Ora-00604 while installing Oracle 10g on Windows XP SP2

I was installing Oracle 10g on Windows XP but the dbca was failling. So I tried to create a database manually.
But every time I launch this:
"SQL> startup nomount pfile="C:\oracle\product\10.2.0\admin\XP10G\scripts\initXP10G.ora";"
I always had:
ORA-00604: error occurred at recursive SQL level 1
ORA-02248: invalid option for ALTER SESSION
I tried to change some memory value in the init*.ora without more success.
So if anyone has been had such issue; he would be an help for me.
Thansks
MUGANGA

initXP10G.ora is a 3 Kbytes file created by OEM and updated by Dos edit program. Here bellow is the contain:
# Copyright (c) 1991, 2001, 2002 by Oracle Corporation
# Cache and I/O
db_block_size=8192
db_cache_size=25165824
db_file_multiblock_read_count=16
# File Configuration
control_files=("C:\oracle\product\10.2.0\oradata\XP10G\control01.ctl", "C:\oracle\product\10.2.0\oradata\XP10G\control02.ctl", "C:\oracle\product\10.2.0\oradata\XP10G\control03.ctl")
db_recovery_file_dest=C:\oracle\product\10.2.0\flash_recovery_area
db_recovery_file_dest_size=2147483648
# Cursors and Library Cache
open_cursors=150
processes=100
# Diagnostics and Statistics
background_dump_dest=C:\oracle\product\10.2.0\admin\XP10G\bdump
core_dump_dest=C:\oracle\product\10.2.0\admin\XP10G\cdump
user_dump_dest=C:\oracle\product\10.2.0\admin\XP10G\udump
# Miscellaneous
compatible=10.2.0.1.0
# Job Queues
job_queue_processes=10
# Database Identification
db_domain=""
db_name=XP10G
# SGA Memory
sga_target=177209344
# Processes and Sessions
processes=150
# System Managed Undo and Rollback Segments
undo_management=AUTO
undo_tablespace=UNDOTBS1
# Shared Server
dispatchers="(PROTOCOL=TCP) (SERVICE=XP10GXDB)"
# Security and Auditing
audit_file_dest=C:\oracle\product\10.2.0\admin\XP10G\adump
remote_login_passwordfile=EXCLUSIVE
# Sort, Hash Joins, Bitmap Indexes
pga_aggregate_target=58720256
shared_pool_size=83886080
nls_territory='SWITZERLAND'
nls_language='FRENCH'

Installing oracle 10g on windows vista business

will i be able to install oracle 10g on Windows Vista business? Please respond me.

Oracle 10.2.0.3 is certified on Vista
http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10203vista.html

Install Oracle 10g on windows 2008 Server 64bit

Is it possible to install Oracle 10g on Windows 2008 64bit . I read one post below it says , windows 2008 is not certified for oracle 10g ..
windows server 2008 Oracle 10G 64 bit
before I installed 32bit , it is throwing error message on alert log file on every 5 seconds.
"OER 7451 in Load Indicator : Error Code = OSD-04500: illegal option specified
O/S-Error: (OS 1) Incorrect function. ! "
if it is possible which version I want to download is best ..
and what is the recommendation whether it is 10g or 11g

You mean to say Oracle 10g 64bit will not work in Windows 2008..?No, i meaned the post you linked was written in year 2008, in that year it's was a unsupported platform for that oracle version. Actually its supported and you can install it.
Furthermore like Aman told you, It's more recommended install 11gR2 version
Edited by: Fran on 29-may-2012 4:20

Installing Oracle 10g on Windows Server 2008

Hi,
I want to install Oracle 10g on Windows Server 2008. As per Oracle, I should install 10.2.0.3 and then apply patchset 10.2.0.4.
For that, one has to sign in to metalink which is possible only for customers. I am
using Oracle only for educational purposes for now. Is there any other way of using Oracle 10g on Windows 2008?
Thanks,
Vladi

Of course if you don't have support and for educational purpose only , you should compromise a little by either install other OS or get virtual machine like VMware.
Or stay with 10.2.0.3, that should work in most cases.

Oracle 10g on Windows - How to connect?

Similar Messages

Maybe you are looking for