Oracle 10g problem on win 2000 server!!

Hi,
I have installed oracle 10g on win 2000 server with service pack 4 to my home machine but the problem I am facing is that when I start my db on the system my system gets slow it consumes most of the Ram.I alter few SGA parameters in init.ora file but the problem continues to be effect me.I need to get around that problem asap hope you guys help me as u did in past....
thanks a lot...

Hi,
It's 128MB should i expand it? or what abt oracle 9i if i uninstall of oralce 10g.act I was earlier using oralce 9i.I would like to know that all the commands which used to support to oracle 9i will it support completly to 10g.
thanks a lot..

Similar Messages

Regarding Installation of Oracle 10g in windows Advanced 2000 Server

Dear Friends,
Please let if Oracle 10g Release 2 can be installed in windows Advanced 2000 Server and what are the requirements for installing on this Operating System.
please do post your answers here(Plz do not post links)
thanks

please do post your answers here(Plz do not post links)WHY???
Kamran Agayev A. (10g OCP)
http://kamranagayev.wordpress.com
[Step by Step install Oracle on Linux and Automate the installation using Shell Script |http://kamranagayev.wordpress.com/2009/05/01/step-by-step-installing-oracle-database-10g-release-2-on-linux-centos-and-automate-the-installation-using-linux-shell-script/]

What i need to have to run oracle 10g on win 2000 server.

hi,
I want to install oracle 10g on win 2000 server,what should I need to do to install oracle 10g.
thanks Alok kumar

Hi...
Try check http://tahiti.oracle.com
There are complete documentation and also installation guide for Windows where pre-requisites are included.

Problem installing Oracle 9i database entreprise edition on win 2000 server

Hi,
I am trying to install the oracle 9i database 2.0(release2) on Win 2000 server and get this error message.
"Couldn't connect to the server - Please check the network and that server daemons are running. (Socket error 10061).
Could somebody help...........
Thanks in advance.
Maya

hi,
try to install service pack for windows 2000 and try.

Oracle 8.1.6 On Win'2000 Server 5.00.2195 SP1

I tryed to Installed Oracle 8.1.6 On Win'2000 Server 5.00.2195 (Stardard Edition) SP1....The Moment I clicked on Oracle Universal Installers mail page "Install" the page closes down and the next page never comes...
Please Help !!!!!

Hi,
I don't have a suggestion, but I can say that I am running fine with the exact same configuration. Win2k server, sp2 and Oracle 8.1.6.

Can't uninstall or reinstall oracle 10g express edition in w/server 2003

Hi,
I need help from all of you, i already install oracle 10g express edition in
windows server 2003 in D drive. but i can't remove because the oracle not in
the add remove program so i download the windows install clean up to remove
but after remove it still in the all program i still can start and stop the
database but can't go to the database home page.The error message (the install
cannot proceed as service OracleServiceXE is present on the system. Remove the
service , reboot the systemand retry the installation) can any one guide me to use
command prompt to remove.
My email address [email protected]
Thanks

Hi,
Perform the following steps, this will solve your problem and can go with new installation. :-)
(Only perform the steps 7.2 section and here is the link : http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25143/toc.htm#BABDJDCD
Manually Removing Oracle Database XE
If the deinstallation is interrupted, follow these steps to manually remove Oracle Database XE from your computer:
Step 1: Stop the Oracle Database XE Services
Step 2: Remove the Oracle Database XE Registry Editor Settings
Step 3: Update the System Variable Path
Step 4: Remove Oracle Database XE from the Start Menu and Desktop
Step 5: Remove the Oracle Database XE Directories
Step 6: Install and Run the Windows Installer CleanUp Utility
7.2.1 Step 1: Stop the Oracle Database XE Services
Follow these steps:
1. Open the Windows Services utility: From the Start menu, select All Programs, then Administrative Tools, and then Services.
2. If any of the following Oracle services exist and have the status Started, then select each of the services, and click Stop:
OracleXE
OracleXETNSListener
OracleJobSchedulerXE
OracleXEClrAgent
OracleMTSRecoveryService
3.
Exit Services.
See also the Microsoft online help for more information on stopping services.
7.2.2 Step 2: Remove the Oracle Database XE Registry Editor Settings
Follow these steps:
1.
Log on to Windows with Windows administrative privileges.
2.
Ensure that you followed the instructions under "Step 1: Stop the Oracle Database XE Services" to stop the Oracle Database XE services.
3.
Start the Registry Editor at a command prompt:
SYSTEM_DRIVE:\> regedit
4.
Go to HKEY_CLASSES_ROOT.
5.
Delete the following keys:
NEED TO CONFIRM THE XE-SPECIFIC ONES.
6.
Go to HKEY_CURRENT_USER\Software.
7.
Under Microsoft\Windows\CurrentVersion\Explorer\MenuOrder\Start Menu\Programs, delete the Oracle Database 10g Express Edition key.
8.
Go to HKEY_LOCAL_MACHINE\SOFTWARE and search for the ORACLE group key.
9.
Expand the ORACLE group key and then delete the KEY_XE and OracleMTSRecoveryService keys.
10.
Go to HKEY_LOCAL_MACHINE\SOFTWARE\ODBC\ODBCINST.INI.
11.
Expand the ODBCINST.INI key and remove the Oracle in XE key.
12.
Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services.
13.
Delete the following keys:
OracleServiceXE
OracleXEClrAgent
OracleXETNSListener
14.
Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Eventlog\Application.
15.
Delete the Oracle.xe key.
16.
Exit the Registry Editor.
17.
Restart your computer.
Thanks,
Rams...
Edited by: user10888288 on May 3, 2010 5:58 AM

New Install Win 2000 Server ORA-12560 : TNS : Protocol Adapter Error

I am trying to learn Oracle.
I get the following when logging into SQL*Plus.
ORA-12560 : TNS : Protocol Adapter Error
I have just installed New Install Win 2000 Server and then Oracle 8i for Win2k
null

Step 1 - from a command line on the database machine, enter 'lsnrctl status' and report the output
Step 2 - display the contents of the %ORACLE_HOME%\network\admin\tnsnames.ora file on the machine running sqlplus.
These are the first two stepo, whether on the database machine or in a traditional client-server configuration.

Error on clone database, oracle 10g release 2 for windows server 2008

Hi,
OS: Windows Server 2008 X64
Oracle: oracle 10g release r2 for windows server 2008
An error occurred when creating a database, stop at last step, Screenshot:
[http://temp.wsria.com/oracle_create_db.png|http://temp.wsria.com/oracle_create_db.png]
the trace log content:
[main] [9:56:35:982] [CommandLineArguments.process:563] CommandLineArguments->process: number of arguments = 32
[main] [9:56:35:982] [CommandLineArguments.process:738] CommandLineArguments->process: Create Database argument is specified
[main] [9:56:35:982] [CommandLineArguments.process:910] CommandLineArguments->process: template Name argument is specified
[main] [9:56:35:982] [CommandLineArguments.process:960] CommandLineArguments->process: db name argument is specified
[main] [9:56:35:982] [CommandLineArguments.process:3074] CommandLineArguments->process: in Operation Type is Creation/GenerateScripts Mode condition
[main] [9:56:35:997] [CommandLineArguments.process:3298] CommandLineArguments->process: Successfully process command line arguments
[main] [9:56:36:668] [Host.checkOPS:2055] Inside checkOPS
[main] [9:56:36:668] [Host.checkOPS:2067] Trying to check cluster existence
[main] [9:56:36:715] [Library.getInstance:97] Created instance of Library.
[main] [9:56:36:715] [Library.load:197] Loading orauts.dll...
[main] [9:56:36:715] [Library.load:203] oracleHome D:\oracle\product\10.2.0\db_1
[main] [9:56:36:715] [sPlatform.isHybrid:63] osName=Windows Vista osArch=amd64 rc=false
[main] [9:56:36:715] [Library.load:223] Loading library D:\oracle\product\10.2.0\db_1\bin\orauts.dll
[main] [9:56:36:715] [Library.load:247] Loaded library D:\oracle\product\10.2.0\db_1\bin\orauts.dll from path=
D:\oracle\product\10.2.0\db_1\bin
[main] [9:56:36:715] [Library.load:197] Loading MSVCRT.dll...
[main] [9:56:36:715] [Library.load:203] oracleHome D:\oracle\product\10.2.0\db_1
[main] [9:56:36:715] [sPlatform.isHybrid:63] osName=Windows Vista osArch=amd64 rc=false
[main] [9:56:36:715] [Library.load:223] Loading library D:\oracle\product\10.2.0\db_1\bin\MSVCRT.dll
[main] [9:56:36:731] [Library.load:247] Loaded library D:\oracle\product\10.2.0\db_1\bin\MSVCRT.dll from path=
D:\oracle\product\10.2.0\db_1\bin
[main] [9:56:36:731] [Library.load:197] Loading orawsec10.dll...
[main] [9:56:36:731] [Library.load:203] oracleHome D:\oracle\product\10.2.0\db_1
[main] [9:56:36:731] [sPlatform.isHybrid:63] osName=Windows Vista osArch=amd64 rc=false
[main] [9:56:36:731] [Library.load:223] Loading library D:\oracle\product\10.2.0\db_1\bin\orawsec10.dll
[main] [9:56:36:731] [Library.load:247] Loaded library D:\oracle\product\10.2.0\db_1\bin\orawsec10.dll from path=
D:\oracle\product\10.2.0\db_1\bin
[main] [9:56:36:731] [Library.load:197] Loading orasrvm10.dll...
[main] [9:56:36:731] [Library.load:203] oracleHome D:\oracle\product\10.2.0\db_1
[main] [9:56:36:731] [sPlatform.isHybrid:63] osName=Windows Vista osArch=amd64 rc=false
[main] [9:56:36:731] [Library.load:223] Loading library D:\oracle\product\10.2.0\db_1\bin\orasrvm10.dll
[main] [9:56:36:731] [Library.load:247] Loaded library D:\oracle\product\10.2.0\db_1\bin\orasrvm10.dll from path=
D:\oracle\product\10.2.0\db_1\bin
[main] [9:56:36:731] [Version.isPre10i:189] isPre10i.java: Returning FALSE
[main] [9:56:36:731] [WindowsSystem.regKeyExists:1006] WindowsSystem.regKeyExists: mainkey= HKEY_LOCAL_MACHINE subkey = Software\Oracle\Ocr
[main] [9:56:36:746] [WindowsSystem.getCSSConfigType:1163] configType=null
[main] [9:56:36:746] [Host.checkOPS:2073] cluster existence:false
[main] [9:56:36:746] [Host.checkOPS:2111] Cluster installed=false
[main] [9:56:36:902] [InitParamHandler.endElement:506] CustomSGA flag: false
[main] [9:56:36:902] [InitParamHandler.endElement:507] Database Type: MULTIPURPOSE
[main] [9:56:36:918] [InitParamHandler.endElement:508] Mem Percentage: 40
[main] [9:56:36:918] [InitParamHandler.endElement:526] distributing Memory: 13737443328
[main] [9:56:36:918] [MemoryCalculator.calculateMemory:122] Setting SGA to MAX_SGA 1610612736
[main] [9:56:36:918] [StorageAttributes.setAttribute:232] IN threadID:1 group#=1
[main] [9:56:36:918] [StorageAttributes.setAttribute:232] IN threadID:1 group#=2
[main] [9:56:36:918] [StorageAttributes.setAttribute:241] Current threadID=1
[main] [9:56:36:918] [StorageAttributes.setAttribute:248] Current threadID=1 ==> redoGroups[0]=1
[main] [9:56:36:918] [StorageAttributes.setAttribute:258] vRedoGroups:[1]
[main] [9:56:36:918] [StorageAttributes.setAttribute:288] setAttribute: bExists=false
[main] [9:56:36:918] [StorageAttributes.setAttribute:232] IN threadID:1 group#=3
[main] [9:56:36:918] [StorageAttributes.setAttribute:241] Current threadID=1
[main] [9:56:36:918] [StorageAttributes.setAttribute:248] Current threadID=1 ==> redoGroups[0]=1
[main] [9:56:36:918] [StorageAttributes.setAttribute:248] Current threadID=1 ==> redoGroups[1]=2
[main] [9:56:36:918] [StorageAttributes.setAttribute:258] vRedoGroups:[1, 2]
[main] [9:56:36:933] [StorageAttributes.setAttribute:288] setAttribute: bExists=false
[main] [9:56:36:933] [TemplateManager.parseCloneTemplate:1477] See for any transportable datafiles in TemplateManager.....
[main] [9:56:36:933] [TemplateManager.isInstallTemplate:2178] Selected Template by user:=General Purpose
[main] [9:56:36:933] [TemplateManager.isInstallTemplate:2185] The Message Id to be searched:=GENERAL_PURPOSE
[main] [9:56:36:933] [TemplateManager.parseCloneTemplate:1489] create new clone data file for tp file.......
[main] [9:56:36:933] [Host.setupOIDCommandlineParameters:7184] setupOIDCommandlineParameters:
[main] [9:56:36:933] [Host.setupOIDCommandlineParameters:7185] m_regWithdirService: false
[main] [9:56:36:933] [Host.setupOIDCommandlineParameters:7186] m_unregWithdirService: false
[main] [9:56:36:933] [Host.setupOIDCommandlineParameters:7187] m_updateDirService: false
[main] [9:56:36:933] [Verifier.processRawConfigFile:3523] StorageType == 0
[main] [9:56:36:933] [Verifier.setOradataDest:4349] setOradataDest:dfDest=D:\oracle\product\10.2.0\oradata
[main] [9:56:36:933] [TemplateManager.updateDatafileDestination:1957] updateDatafiles:datafileDir=D:\oracle\product\10.2.0\oradata
[main] [9:56:36:933] [TemplateManager.updateDatafileDestination:2103] From template, RedoLogGrName=1
[main] [9:56:36:965] [TemplateManager.updateDatafileDestination:2118] new file name redo01.log
[main] [9:56:36:965] [TemplateManager.updateDatafileDestination:2103] From template, RedoLogGrName=2
[main] [9:56:36:965] [TemplateManager.updateDatafileDestination:2118] new file name redo02.log
[main] [9:56:36:965] [TemplateManager.updateDatafileDestination:2103] From template, RedoLogGrName=3
[main] [9:56:36:965] [TemplateManager.updateDatafileDestination:2118] new file name redo03.log
[main] [9:56:36:965] [ProgressOnlyHost.performOperation:162] processRawConfigFile=false
[main] [9:56:36:965] [Verifier.validateTemplate:1629] StorageType == 0
[main] [9:56:36:965] [ProgressOnlyHost.performOperation:178] validateTemplate=true
[main] [9:56:36:965] [OracleHome.isRacEnabled:149] bRacOn = false
[main] [9:56:36:980] [Verifier.validateTemplate:1629] StorageType == 0
[main] [9:56:36:980] [Verifier.calculateCloneDatafilePathsAndSizes:2951] canonicalPath=D:\oracle\product\10.2.0\
[main] [9:56:36:980] [Verifier.calculateCloneDatafilePathsAndSizes:2951] canonicalPath=D:\oracle\product\10.2.0\
[main] [9:56:36:980] [Verifier.calculateCloneDatafilePathsAndSizes:2951] canonicalPath=D:\oracle\product\10.2.0\
[main] [9:56:36:980] [Verifier.calculateCloneDatafilePathsAndSizes:2951] canonicalPath=D:\oracle\product\10.2.0\
[main] [9:56:36:980] [Verifier.calculateCloneDatafilePathsAndSizes:2951] canonicalPath=D:\oracle\product\10.2.0\
[main] [9:56:36:980] [Verifier.calculateRedoLogGroupFileSizes:3083] canonicalPath=D:\oracle\product\10.2.0\
[main] [9:56:36:980] [Verifier.calculateRedoLogGroupFileSizes:3083] canonicalPath=D:\oracle\product\10.2.0\
[main] [9:56:36:980] [Verifier.calculateRedoLogGroupFileSizes:3083] canonicalPath=D:\oracle\product\10.2.0\
[main] [9:56:36:980] [Verifier.getControlfFileSizes:3001] No. of Control files:=3
[main] [9:56:37:105] [Host.executeSteps:4044] Executing steps....
[main] [9:56:37:105] [Host.setUpForOperation:2920] setUpForOperation: Mode = 128
[main] [9:56:37:121] [Host.executeSteps:4186] setupForOperation returned: true
[main] [9:56:37:121] [Host.createStepSQLInterface:5948] sid =ora10g
[main] [9:56:37:136] [SQLEngine.initialize:242] Execing SQLPLUS/SVRMGR process...
[main] [9:56:37:136] [SQLEngine.initialize:270] m_bReaderStarted: false
[main] [9:56:37:136] [SQLEngine.initialize:274] Starting Reader Thread...
[Thread-4] [9:56:37:355] [StepContext$ModeRunner.run:2478] ---- Progress Needed:=true
[Thread-4] [9:56:37:464] [BasicStep.execute:202] Executing Step : CLONE_DB_CREATION_RMAN_RESTORE
[Thread-4] [9:56:37:464] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-01092
[Thread-4] [9:56:37:464] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-01034
[Thread-4] [9:56:37:464] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-03114
[Thread-4] [9:56:37:464] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-12560
[Thread-4] [9:56:37:464] [StepErrorHandler.setIgnorableErrors:250] setting Ignorable Error: ORA-01109
[Thread-4] [9:56:37:464] [BasicStep.configureSettings:304] messageHandler being set=null
[Thread-4] [9:56:37:464] [BasicStep.execute:202] Executing Step : INSTANCE_CREATION
[Thread-4] [9:56:37:464] [BasicStep.configureSettings:304] messageHandler being set=null
[Thread-4] [9:56:37:479] [InitParamAttributes.sortParams:3532] m_sortOn:-1 sortOn:4
[Thread-4] [9:56:37:620] [OracleHome.isRacEnabled:149] bRacOn = false
[Thread-4] [9:56:37:667] [Host.noEntryinOratab:5115] Check made for oratab arg passed............
[Thread-4] [9:56:37:667] [Oradim.getAddEntryCommand:353] AddEntry=[D:\oracle\product\10.2.0\db_1\bin\oradim.exe, -new, -sid, ORA10G, -startmode, manual, -spfile]
[Thread-4] [9:56:38:899] [Oradim.getEditEntryCommand:422] getEditEntry cmd=[D:\oracle\product\10.2.0\db_1\bin\oradim.exe, -edit, -sid, ORA10G, -startmode, auto, -srvcstart, system]
[Thread-4] [9:56:39:55] [Oradim.addSidToRegistry:871] oracleHomeKey: SOFTWARE\ORACLE\KEY_OraDb10g_home1
[Thread-4] [9:56:39:117] [BasicStep.configureSettings:304] messageHandler being set=oracle.sysman.assistants.util.UIMessageHandler@c73f0d8
[Thread-4] [9:56:39:117] [CloneRmanRestoreStep.executeImpl:217] Instance Creation went fine..........
[Thread-4] [9:56:39:117] [CloneRmanRestoreStep.executeImpl:224] db_recovery_file_dest=D:\oracle\product\10.2.0\flash_recovery_area
[Thread-4] [9:56:39:117] [CloneRmanRestoreStep.executeImpl:227] db_recovery_file_dest_size=2147483648
[Thread-4] [9:56:39:991] [SQLEngine.setSpool:1750] old Spool = null
[Thread-4] [9:56:39:991] [SQLEngine.setSpool:1751] Setting Spool = D:\oracle\product\10.2.0\db_1\cfgtoollogs\dbca\ora10g\CloneRmanRestore.log
[Thread-4] [9:56:39:991] [SQLEngine.setSpool:1752] Is spool appendable? --> true
[Thread-4] [9:56:39:991] [CloneRmanRestoreStep.executeImpl:320] starting with pfile=D:\oracle\product\10.2.0\admin\ora10g\pfile\init.ora

Check your SQLNET.AUTHENTICATION_SERVICES settings in sqlnet.ora file.
ORA-28547 : Connection to server failed, probable Net8 admin error
thanks
http://swervedba.wordpress.com/

Can't uninstall or reinstall oracle 10g express edition in windows server 2

Hi,
I need help from all of you, i already install oracle 10g express edition in windows server 2003 in D drive. but i can't remove because the oracle not in the add remove program so i download the windows install clean up to remove
but after remove it still in the all program i still can start and stop the database but can't go to the database home page. can any one guide me to use command prompt to remove.
Thanks

Hi,
I need help from all of you, i already install oracle 10g express edition in windows server 2003 in D drive. but i can't remove because the oracle not in the add remove program so i download the windows install clean up to remove
but after remove it still in the all program i still can start and stop the database but can't go to the database home page. can any one guide me to use command prompt to remove.
Thanks

Oracle 10g database creation in windows2003 server

hi,
i need the step by step procedure to create oracle 10g database in windows 2003 server.
with regards
velu

asifkabirdba wrote:
http://download.oracle.com/docs/cd/B19306_01/install.102/b15681/toc.htm
Asif,
IMO, the OP wanted to have steps given to him for the database creation , not the installation of the software.Not sure though since the wording chosen by him is not very clear.
@OP,
If you are looking for the database creation steps , the best would be to use DBCA! Other than that, you may want to look at the manual way of doing the same, given over here.
http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/create.htm#i1017640
That said, if you were looking for the installation instructions, please look at the link given by Asif.
HTH
Aman....

Oracle 10g R2 on Windows 2008 Server

Hi all,
Can I install Oracle 10g Release 2 on Windows Server 2008 64-bit? If not, is there any workaround solution? Our brand new server was shipped with Windows Server 2008 CD and we cannot install Windows 2003 on that machine.
Thanks in advance.

Please note that AS 10g R2 is not certified on Windows 2008, as per:
Oracle Application Server 10g Release 2 (10.1.2.0.2) Certification Information
[http://www.oracle.com/technology/software/products/ias/files/as_certification_r2_101202.html]
All certifications are posted here:
http://www.oracle.com/technology/software/products/ias/files/fusion_certification.html
Version 10.1.3 is certified on Windows 2008 and 2008 R2, noting that this is not an upgrade from 10.1.2. It provides a different suite of products. You can decide on 10.1.2 verses 10.1.3 depending on your needs. For all product offerings, the Oracle Fusion Middleware 11g (11.1.1.) is certified on 2008 and 2008 R2.

Microsoft Remote Desktop for Mac and Win 2000 Server

Hello guys,
Could you please confirm that the latest version 8.0.15 is compatible with WIN 2000 Server connections? If not, could you please advise which version of Microsoft Remote Desktop for Mac is the match in order to connect to a WIN 2000 server.
Thank you in advance,
Bogdan

Hello Bogdan
WIN 2000 is supported. See a complete list of supported Windows SKUs here:
https://technet.microsoft.com/en-us/library/dn473006.aspx
Go to the AppStore and download Microsoft Remote Desktop.

How to send STRG+ALT+DELETE throug ARD to a Win 2000 Server

Hello,
Just stuck, how do I send STRGALTDELETE through ARD via VNC-connection to a Win 2000 Server?
Had to restart the machine, but cannot log in now. Thanks for your help.
Jochen

same basic answer, but I'd recommend JollysfastVNC if you go the VNC route:
http://www.jinx.de/JollysFastVNC.html
Or CoRD instead of Microsoft's RDC for Mac
http://cord.sourceforge.net/
The CoRD/RDC is the route I'd go, by the way, since it works very well. It's one thing MS has included with Windows which Apple should have years ago.

Error while installing CRM 4.0 SR1 with Oracle 10.2 on Windows 2000 Server

Hi.. I'm getting error messages in the Database Instance phase, while installing CRM 4.0 SR1 with Oracle 10.2 on Windows 2000 Server. Following are message snippets with last few lines showing error message:
SAPSSEXC.log
[code](DB) INFO: REPOSRC~0 created
(DB) INFO: REPOTEXT created
DbSl Trace: ORA-4031 occured when executing SQL statement (parse error offset = 0)
(IMP) ERROR: DbSlExeModify/DbSlLobPutPiece failed
rc = 99, table "REPOTEXT"
(SQL error 4031)
error message returned by DbSl:
ORA-04031: unable to allocate 84 bytes of shared memory ("shared pool","select name,intcol#,segcol#,...","Typecheck","opndef:qkexrAddMatching1")
(DB) INFO: disconnected from DB
C:\usr\sap\CRM\SYS\exe\run/R3load.exe: job finished with 1 error(s)
C:\usr\sap\CRM\SYS\exe\run/R3load.exe: END OF LOG: 20121102144208
[/code]
SAPAPPL2.log
[code](DB) INFO: SMOT413~0 created
(DB) INFO: SMOT413~R04 created
DbSl Trace: ORA-604 occured when executing SQL statement (parse error offset = 31)
(DB) ERROR: DDL statement failed
(CREATE INDEX "SMOT413~R05" ON "SMOT413" ( "MANDT" , "ERSKZ" ) TABLESPACE PSAPCRM STORAGE (INITIAL 16384 NEXT 0000000040K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) )
DbSlExecute: rc = 99
(SQL error 604)
error message returned by DbSl:
ORA-00604: error occurred at recursive SQL level 1
ORA-04031: unable to allocate 4108 bytes of shared memory ("shared pool","select owner#,name,namespace...","Typecheck","seg:kggfaAllocSeg")
(DB) INFO: disconnected from DB
C:\usr\sap\CRM\SYS\exe\run/R3load.exe: job finished with 1 error(s)
C:\usr\sap\CRM\SYS\exe\run/R3load.exe: END OF LOG: 20121102144207
[/code]
SAPSLEXC.log
[code]DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
(DB) INFO: CO2MAP created
(IMP) INFO: import of CO2MAP completed (0 rows)
(DB) INFO: CO2MAP~0 created
(DB) INFO: CO2MAP~IDX created
DbSl Trace: ORA-604 occured when executing SQL statement (parse error offset = 0)
(DB) ERROR: DDL statement failed
(CREATE TABLE "CO2MAPINF" ( "SRCID" VARCHAR2(30) DEFAULT ' ' NOT NULL , "METHID" VARCHAR2(1) DEFAULT ' ' NOT NULL , "APPLNAME" VARCHAR2(30) DEFAULT ' ' NOT NULL , "PAGEKEY" VARCHAR2(70) DEFAULT ' ' NOT NULL , "ID" NUMBER(10) DEFAULT 0 NOT NULL , "LANGUAGE" VARCHAR2(1) DEFAULT ' ' NOT NULL , "NAMESPACE" VARCHAR2(30) DEFAULT ' ' NOT NULL ) TABLESPACE PSAPCRM620 STORAGE (INITIAL 16384 NEXT 0000000640K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) )
DbSlExecute: rc = 99
(SQL error 604)
error message returned by DbSl:
ORA-00604: error occurred at recursive SQL level 2
ORA-04031: unable to allocate 84 bytes of shared memory ("shared pool","select ts#,file#,block#,nvl(...","Typecheck","opndef:qkexrAddMatching1")
(DB) INFO: disconnected from DB
C:\usr\sap\CRM\SYS\exe\run/R3load.exe: job finished with 1 error(s)
C:\usr\sap\CRM\SYS\exe\run/R3load.exe: END OF LOG: 20121102144742
[/code]
SAPSDIC.log
[code](DB) INFO: TNMAP~0 created
(DB) INFO: TODIR created
DbSl Trace: ORA-604 occured when executing SQL statement (parse error offset = 0)
(IMP) ERROR: DbSlExeModify/DbSlLobPutPiece failed
rc = 99, table "TODIR"
(SQL error 604)
error message returned by DbSl:
ORA-00604: error occurred at recursive SQL level 1
ORA-04031: unable to allocate 4108 bytes of shared memory ("shared pool","update seg$ set type#=:4,blo...","Typecheck","seg:kggfaAllocSeg")
(DB) INFO: disconnected from DB
C:\usr\sap\CRM\SYS\exe\run/R3load.exe: job finished with 1 error(s)
C:\usr\sap\CRM\SYS\exe\run/R3load.exe: END OF LOG: 20121102144811
[/code]
SAPSDOCU.log
[code](DB) INFO: TLSY3~0 created
(DB) INFO: TLSY5 created
(IMP) INFO: import of TLSY5 completed (3 rows)
DbSl Trace: ORA-604 occured when executing SQL statement (parse error offset = 33)
(DB) ERROR: DDL statement failed
(CREATE UNIQUE INDEX "TLSY5~0" ON "TLSY5" ( "LANGU", "REL", "OLD_REL", "IMP_DATE" ) TABLESPACE PSAPCRM STORAGE (INITIAL 16384 NEXT 0000000080K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) )
DbSlExecute: rc = 99
(SQL error 604)
error message returned by DbSl:
ORA-00604: error occurred at recursive SQL level 1
ORA-04031: unable to allocate 4108 bytes of shared memory ("shared pool","update seg$ set type#=:4,blo...","Typecheck","seg:kggfaAllocSeg")
(DB) INFO: disconnected from DB
C:\usr\sap\CRM\SYS\exe\run/R3load.exe: job finished with 1 error(s)
C:\usr\sap\CRM\SYS\exe\run/R3load.exe: END OF LOG: 20121102144811
[/code]
I am not sure but I think the problem is with the allocated shared memory size, which right now is:
init.ora
[code]shared_pool_size = 67108864[/code]
init<SID>.ora
[code]shared_pool_size = 90112000
shared_pool_reserved_size = 9011200
[/code]
If this is the cause of the problem then how much should i increase it to? and do i need to modify the size in both files or only init<SID>.ora? Is there any SAP Note related to this problem? Thanks.
Regards,

Hi Vasu,
ORA-4031... for 99% of cases this means one thing:
the database instance is not configured correctly.
To proceed, do the following:
1. get rid of init.ora (it's not used at all)
2. make sure that the init<sid>.ora file is really used.
 If there is a spfile in the %ORACLE_HOME&/database folder
 then this will be used.
3. With your configured shared pool of 85MB your memory should really not be filled up - anyhow it's really too small for a SAP system!
Thus I'd check how much memory the other sga-area members (buffer cache, large pool, streams pool, java pool...) take up.
 Remember on Windows 32 Bit, everything runs in one single process that can only allocate 2GB (or 3GB if you've set this option).
See note:
<a href="https://websmp102.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=869006&_NLANG=E">#869006 - Composite SAP note: ORA-04031</a>
for more on this.
And when you're setting up parameters anyway, check note
<a href="https://websmp102.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=830576&_NLANG=E">#830576 - Parameter recommendations for Oracle 10g</a>
KR Lars

Universal Installer refuses to run on Win 2000 Server P-II

Hello,
I've seen this problem all over but some people tell me it should only happen with P4 chips? As soon as I plop the 9i install CD into the drive, it auto runs and I click INSTALL. Within a couple seconds, I get a message:
"The Java Runtime Environment was not found at c:\docume~1\admini~1\locals~1\temp\orainstall\jre\bin\jrew.exe. Hence, the Oracle Universal Installer cannot be run. Please visit http://www.javasoft.com and install JRE version 1.1.7 or greater and try again."
I had this problem on an existing server so I did a BRAND NEW installation of Windows 2000 Server and then applied SP3. Still same problem. The processor is a PII-366. What could be wrong?
I've followed all the steps I have found so far:
I've tried copying the install disks to the hard drive.
I've tried renaming the symcjit.dll files (all of them).
I've made sure that all the files are not read only (since they came off of
the CD-R)
I've tried downloading various versions of the JRE (from 1.1.8 to 1.4)
I've read the installation .PDF included on the CD.
Thanks for any suggestions.
...Brad

Hi Raghavan,
Have you applied Services Pack 4 to your WIN 2K SVR installation? If not please do so. After Installation of Oracle 8i you should update the listener.ora (found under ...\<oracle home>\ora82\network\ADMIN). For further details check Oracle installation guide.
Cheers,
Ravi

Oracle 10g problem on win 2000 server!!

Similar Messages

Maybe you are looking for