Oracle-10g RAC on VMware installed on Windows-7(Host)

Hi,
My host OS is Windows-7. Docs. posted on this forum for RAC on VMware says: your Host OS should be Centos OS and in which you will install VMware and Client tools also. In this way u can clone another RAC2 machine.
But I have Oracle VM Virtual Box installed on Windows-7. Another is VMware Player installed on Windows-7.
I want to install Oracle-10g RAC on my Laptop. Please any suggestions or Docs. related to this.
Shakeel

Hi,
while this is a documentation of 11gR2 it gives enough information on how to setup a RAC in a VBox environment:
http://www.oracle-base.com/articles/11g/OracleDB11gR2RACInstallationOnOEL5UsingVirtualBox.php
Regards
Sebastian

Similar Messages

Oracle 10g RAC on vmware

Hi
I am in a tesing enviornment.I want to install Oracle 10g R2 RAC on RHEL5.I am working on VMware server.When i try installing Oracle 10g RAC on win.2k3 server it gives me blue dump error.
.Can anyone tell that Oracle 10g RAC support VM platform or Not.Plz
Thanks
Bobs

Here you go step by step instructions...It worked for me.
http://www.oracle-base.com/articles/10g/OracleDB10gR2RACInstallationOnRHEL4UsingVMwareESXAndNFS.php
Hope this helps,
Regards
http://www.oracleracexpert.com
Learn Oracle RAC Load balancing and failover
http://www.oracleracexpert.com/2010/01/oracle-rac-load-balancing-and-failover.html]
Solution to resolve ORA-600 kfcnullconvert20 Error on ASM
http://www.oracleracexpert.com/2010/02/ora-600-kfcnullconvert20-error-on-asm.html]

Installing Oracle 10g rac on linux 4 using vmware :problem

Hi Expert ,
I'm facing problem on installing oracle 10g rac on centos 4x using vmware, installation is showing errors . The command failed are oifcfg, cluvfy
on running ./cluvfy stage -post crsinst -n rac1,rac2
error:
OCR integrity found invalid for rac1
OCR integrity found invalid for rac2
Please advice...
regards,
Shaan

hi Experts,
orccheck failed for one of the node, can you please suggest what needs to be done now..
filename :/dev/raw/raw1
error "device/file integrity check failed"
error "device not configured"
Regards
Message was edited by:
Shaan_dmp

Oracle 10g RAC on Windows

Installed Oracle 10g RAC on Windows... Everything was
working fine, now when I install CRS it completed at 100% and then in the configuration it gives error
INFO: exitonly tools to be excuted passed: 0
INFO: Starting to execute configuration assistants
INFO: Command = C:\WINDOWS\system32\cmd /c call C:\oracle\product\10.2.0\crs/install/crssetup.config.bat
PROT-1: Failed to initialize ocrconfig
Step 1: checking status of CRS cluster
Step 2: creating directories (C:\oracle\product\10.2.0\crs)
Step 3: configuring OCR repository
ocr upgrade failed with (-1)
Execution of the plugin was aborted
INFO: Configuration assistant "Oracle Clusterware Configuration Assistant" was canceled.
*** Starting OUICA ***
Oracle Home set to C:\oracle\product\10.2.0\crs
Configuration directory is set to C:\oracle\product\10.2.0\crs\cfgtoollogs. All xml files under the directory will be processed
INFO: The "C:\oracle\product\10.2.0\crs\cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
I am using VMware WorkStation 5
http://www.oracle-base.com/articles/10g/OracleDB10gR2RACInstallationOnWindows2003UsingVMware.php
I can see my disks from both machines. Open the "Computer Management" dialog (Start > All Programs > Administrative Tools > Computer Management
I use Windows XP SP2 as the host operating system
Any suggestion?
Message was edited by:
MEXMAN

You know its not certified?
My first thought when I read the subject of this thread, and before reading what you posted, is that you've either done no research on RAC or didn't understand what you've read.
You can create a RAC cluster using any operating system certified by Oracle.
But the operating system is the least important part of creating a cluster. The questions you need to be able to address are:
1. What is your solution to created shared storage?
2. What is your solution to create the cache fusion interconnect and VIPs?
If you don't have an answer to these questions you can not build a RAC cluster.

DELL BLADE Server and Windows 2003 Oracle 10g RAC

Anyone out there sucessfully set up a Windows 2003 Oracle 10g RAC using DELL BLADE Servers and VMWARE configuration?

dear guys
i have 3 database instances running on primary databases.means 3 different sid.now i want to create DR for same.is it possible.how can i do it.its like 3 versions production,trial and development database running on primary under same home.i want to make dr(standby) .so do i follow same proedure for all.
taking backups of all three.creaating pfile for all and then to start recovery for all three.is it possibleYes, It's called RAC but It need to be licensed.
You have a lot of manuals online so check by yourself how to install and configure.

Putting Oracle Apps 11i on 10g RAC using VMware

Hello All,
I am building a Oracle Applications 11i on 10g RAC, using VMware..Since there aren't any docs I could find on internet explaining how to do this, I have come up with my own. I have combined the MEtalink doc:362135.1 and the docs describing building a 10gRAC "database" using VMware..I want to know if the below process is good enough to get the required results:
Steps:
-Install VMware on HOST m/c
-Configure 1st virtual m/c, say RAC1
-Install RHEL on RAC1
-Install 11i with 9i database on the local SCSI bus- SCSI 0:0
-Install VMware client tools
-Create a new ethernet adapter(for private interconnect) on RAC1
-Create shared disks on RAC1
-Partition the disks
-Add the disks as RAW devices in /etc/rawdevices
-Clone RAC1 to a new virtual m/c,say RAC2
-Delete the 11i apps directories from its local SCSI bus..since these would be redundant on RAC2
-Install Clusterware s/w on RAC1 using the same oraInventory that is used by the Applications 11i installation-
-Install the 10g DB software and create ASM instances using dbca
-Install Database componenets from 10g companion CD
-Upgrade CRS abd DB s/w to 10.2.0.4
-Upgrade the 9i database to 10g using dbua from the 10g ORACLE_HOME
-Convert the newly upgraded 10g databse to RAC using the rconfig tool
-Post migration steps for RAC
-Enable AutoConfig on the Applications Database tier
- Follow the "Establish Applications Environment for RAC" section from Doc:362135.1
-Configure PArallel Concurrent Processing(PCP)
Thanks,
Sandeep

(Considering that there are only 2 nodes the scenario the steps would be as follows:
1. Install RAC using the steps provided at the link:
http://oracle-base.com/articles/10g/OracleDB10gR2RACInstallationOnCentos4UsingVMware.php
2.On RAC1 create a single instance of Oracle 11i (Both DB and Apps are on the same node)
3. Follow the steps outlined in the Note:362135.1
One thing to note is that the steps are the same whether the nodes are real or virtual.

Oracle 10g RAC VMware support

Is Oracle 10g RAC supported in a production VMware environment yet? If not, what is the hold up? VMware is the standard in the industry now and not being able to virtulize is both costly and not practical.

As the previous responder points out, whilst Oracle does not actively certify its products in VMWare environments, it will provide support provided the issue is already known on the guest OS, or it can be reproduced outside a VMWare environment.
I know of many organisations running VMWare with RAC, including my own although we tend NOT to use it in Production environments. Oracle has many resource management capabilities built in to the RDBMS and the Grid Infrastructure which only work well if Oracle has control of all of the resources on a server.
I guess if you're not satisfied with our responses, you should direct your question to Oracle Support rather than this forum. Certification of VMWare is probably as much (or may be mostly) a business decision by Oracle and us Forum members can't generally explain those decisions.

Oracle database not starting up in oracle 10g RAC

Hi!
Recently I came across one problem with one node oracle 10g RAC.When the Oracle database is started,while opening it is giving ORA-03113:End of file on communication channel error.When I saw the the alert trace file and other trace files I found Disk group is exhausted error and it is not able to create .dbf files.Actually it is not a production server and I gave archive log destination in SAN.Even the spfile(content of init_database.ora) is in SAN..
I tried Asmcmd utility to delete the archive log files.As the oracle is not available I am not able to asmcmd prompt.
How to change the destination of archive log and to remove the old archive log files(as it is a testing environment we can remove) from SAN?Please let me know.
Thanks & Regards
Srikanth MVS

keithrust wrote:
On VMware there's a known issue with Oracle databases on a Windows client not starting up properly all the time and a manual startup using oradim -start -sid <whatever> is required to get it fully running. Hmmm, doing it several time, and never seen such issue. Which "known issue" and by who are you talking about ?
I created a brand new Oracle VM Windows 2003 32-bit server, installed the Oracle drivers for paravirtualization, and whammo, the problem is still hereI'm sure, you miss something somewhere in the config. Right now, you're on supported configuration, you could either raise a SR to the support, or get help from your peer on Oracle Database General forum.
Ah, but it's not a Windows issue. On a non-VM Windows box the database starts just fine all the time. Again, this is a known issue acknowledged by Oracle on the VMware side, I'm just surprised it exists on the Oracle VM side.Again, give more details about this "known issue". Never heard about that, eventhough I've been around for years.
I was afraid you were going to ask that. I'll have to search for it again, but I think you can do the same as well....Well, I doubt you could find a Metalink note about Oracle on VMWare. So far, Oracle has always refused to support database on OS virtualized on VMWare (or any VM software other than Oracle VM). Based on that, you could be sure, your "known issue" is not an issue on Oracle VM.
If you want more help, again, give more details about your issue.
Nicolas.

10g RAC on VMWare Workstation

Hi Folks,
i tried to install 10g RAC on VMWare 4.5.2 for testing.
Hostsystem is XP, ghost system are RedHat-ES-30.
I configured tho 2 nodes with 2 scsi adapters and 2 Network Card and a shared Disk.
I installed ocfs 1.0.12 on both nodes, formated the disk and it seems to be fine.
On the next step ( Installation of CRS ) the runInstaller fails after the node configuration screen with the message:
Oracle Cluster Registry File can only be saved on a shared filesystem file or on a RAW Device.
Any Ideas ?
Thanks
Martin

Hi Laurent,
Thanks for your reply.
I checked that and i can't find the Processes or any think else witch is discribed in thr article !
The Installer pops a message during the creation of the ocr file.
Have any body tried it with RAW Devices ?
Martin

Oracle 10g RAC

Hi All,
I am a research student currently struggling to install Oracle 10g RAC on Windows OS.What i understand about a Oracle RAC database system is that it involves a configuration of multiple hosts or servers joined together with a clustering software and accessing the shared disk structures.What i also understand is that i need a CRS provided by Oracle for a Windows or Linux based RAC installation.
What i don't understand is for a Two node RAC system do i need a Third machine which has the shared storage device.If yes do i have to install a copy of Oracle 10g Enterprise Edition and CRS on the shared storage device moreover do i need to install a copy of Oracle 10g Enterprise edition on each of the nodes or just the clusterware is enough.

Hi Salil
No, you do not need a third machine. You can even setup RAC as a single node on one machine! What you do need is to have some sort of cluster aware file system. Try looking at OCFS on Windows in your case.
If you are interested in a Linux example please have a look at the examples at http://ocpdba.net/oracle9i_rac/cheaprac.html and http://ocpdba.net/oracle10g_rac for an OCFS implementation I am working on.
regards,
Ahbaid

Shared Storage allocation for Oracle 10g RAC

Hi,
I am about to implement a Two Node Oracle 10g RAC on Windows 2008 (32-Bit) servers. We are going to use EVA4400 storeage and we have 600 GB for Oracle RAC and database.
I intend to follow the steps given in RACGuides_Rac10gR2OnWindows.pdf mentioned in Note 811271.1 (RAC Assurance Support Team: RAC Starter Kit and Best Practices (Windows)).
I would like to know how should I allocated the storage for OCR,Vote, Database and Flash Recovery Area. Meaning how many LUNs and of what size to be created and presented to both the servers. To start with I need to create a 25 GB database. We will be using Raw Device for OCR and Vote and ASM for Database and Flash Recovery Area.
Please advice.
Thanks,
Thiru

I am about to implement a Two Node Oracle 10g RAC on Windows 2008 (32-Bit) servers. Oracle 10g on Windows 2008 is not supported. Anyway installing a cluster as of today i would use a 64-bit operating system together with a 64-bit database. Everything else is not state-of-the-art anymore.
As of today i would go with 11g Release 1 (11.1.0.7.0) plus latest patches for Clusterware and ASM. Because you are using Windows 2008 you must use 11g Release 1 for the database as well. Bear in mind that Windows 2008 R2 is at this point in time not supported for 11g R1 or 11g R2 either.
I would like to know how should I allocated the storage for OCR,Vote, Database and Flash Recovery Area. Meaning how many LUNs and of what size to be created and presented to both the servers. This is said in the installation documents. Rule of thumb: At least three LUNs of 2 GB for OCR and three LUNs of 2 GB for Voting disk.
To start with I need to create a 25 GB database. We will be using Raw Device for OCR and Vote and ASM for Database and Flash Recovery Area.According to Oracles recommendations: Two disk groups: one for database files, the other for the flashback area.
But your setup may be different (more disk groups,....)
Ronny Egner
My blog: http://ronnyegner.wordpress.com

Oracle 10g RAC installation on linux server.

HI,
Can anybody help me that to give some answers of my question's ?
can i install oracle 10g RAC on a single hdd linux server which is installed on an ordinary intel processor based machine.
if i can then plz tell me this how can i do this.
i am new in linux server just wanted to learn that how to install oracle 10g RAC.
thanks & Regards to all of my seniors..

The only option you have to install RAC on 1 machine is to use Oracle VM, VMWare or Linux Virtualization feature (Linux Xen).

Oracle 10g RAC installation on HP-UX 11.31 for SAP ERP 6.04

Dear experts,
We are trying to install SAP ERP 6.0 EHP4 with Oracle 10g RAC on HP-UX 11.31. Please note that, We are using VERITAS cluster filesystem (CFS) for this purpose and not HP-UX ServiceGuard ClusterFileSystem.
*As per SAP procedure, we have installaed plain plain SAP system with single instance Oracle (ref: Configuration of SAP NetWeaver for Oracle Database 10gRAC guide). Now we are first trying to install Oracle Clusterware (CRS) and then we will install Oracle RAC software. Is this procedure right?*
Which file (and its path) we have to use for CRS installation and its patch? Is it runInstaller under /oracle/stage/102_64/clusterware? With this file we can install CRS 10.2.0.1. Similarly for Oracle RAC, which files we are supposed to use, i.e for installation and patch upgrade?
Also can we use clusterware package available from Oracle directly in the SAP environment?
We tried to install CRS with runInstaller while running Configuration Assistant after root.sh script.
The following commands are failing in Configuration Assistant:
/oracle/CRS/102_64/bin/racgons add_config erpprdd1:4948 erpprdd2:4948
/oracle/CRS/102_64/bin/oifcfg setif -global lan1/20.20.20.0:cluster_interconnect lan0/192.168.3.0:public
/oracle/CRS/102_64/bin/cluvfy stage -post crsinst -n erpprdd1,erpprdd2
1st command does not give any output if run manually.
2nd commands o/p: PRIF-12: failed to initialize cluster support services
3rd commands fails in every check
Please suggest the solution and expecting answers to the above mentioned questions.
Thanks & Regards,
Tejas

>
Charles Yu wrote:
> Q1: Oracle RAC with 9.2.x on HP-UX?
> A: For HA environment, cluster software is: MC/SG on HP-UX 11.31; there are optional components of MC/SG for supporting Oracle RAC and SAP application. I was confused that I could not find the installation guide regarding 4.6C on MC/SG HA environment of HP-UX.
> Charles
Relevant docs for Service Guard (SG) cluster are available at http://docs.hp.com. Hope you have checked for the suport of oracle 92x on HP-UX 11.31
>
Charles Yu wrote:
> Q2: Any reason why you don't use a supported database version?
> A: Actually, in order to avoiding the the risk of database upgrade and minimizing the migration risk, top level has decided that keeping the same Oracle version. Indeed, we don't plan the migration of application. On the other hand, it is complicated to do the assessment for application migration.
> Charles
You can go for combined os migration and db release upgrade also at a stretch with the same downtime.

Oracle 10g rac installation on IBM power server

Dear Gurus,
I am installing Oracle 10g RAC on IBM power server but while running CRS getting the following errors. Please help to resolve this issue.
OUTPUT from Installation log:
INFO: Start output from spawned process:
INFO: INFO:
INFO: /oracle/app/oracle/product/crs/bin/genclntsh
INFO: /usr/bin/ld: cannot find -lxl
INFO: collect2: ld returned 1 exit status
INFO: genclntsh: Failed to link libclntsh.so.10.1
INFO: make:
INFO: *** [client_sharedlib] Error 1
INFO: End output from spawned process.
INFO: INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'client_sharedlib' of makefile '/oracle/app/oracle/product/crs/network/lib/ins_net_client.mk'. See '/oracle/app/oracle/oraInventory/logs/installActions2011-12-26_04-40-48PM.log' for details.
Exception Severity: 1
INFO: Exception handling set to prompt user with options to Retry Ignore
SYSTEM:
IBM power server
Linux 5.3
I have already tried changing ORACLE_HOME,CRS_HOME,LD_LIBRARY_PATH but nothing worked.
Regards,
Prajash

Those errors remind me on errors I encountered when I was trying to do installation that was not certified,
so try to check if installation you are doing is actually supported.
In the meantime , visit metalink and read document [ID 460969.1] , */usr/bin/ld: Cannot Find -lxml10, Genclntsh: Failed To Link Libclntsh.so.10.1*

Oracle 10G RAC - Public & Heartbeat on 1 NIC

Hello all,
actually I am installing Oracle 10G RAC on rhel 4 (4 node cluster). But the Cluster Verification Utility aborts with errors. I checked the configToolAllCommands and tried to run the failed commands manually:
#/opt/oracle/crs/bin/oifcfg setif -global eth0.100/172.18.0.0:cluster_interconnect eth0.728/172.16.128.0:public eth0.498/172.17.1.0:cluster_interconnect
PRIF-50: duplicate interface is given in the input
PRIF-50: duplicate interface is given in the input
PRIF-50: duplicate interface is given in the input
Question:
Is it possible to put Public & Heartbeat on one NIC (eth0.728 & eth0.498)
If not is their any workaround for that issue?
Output /etc/hosts
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost
172.18.253.48 eu0266.[company].net cfmaster
172.16.128.11 eu0200.[company].net eu0200
172.16.128.12 eu0201.[company].net eu0201
172.16.128.13 eu0202.[company].net eu0202
172.16.128.14 eu0203.[company].net eu0203
172.18.13.11 eu0200m.[company].net eu0200m
172.18.13.12 eu0201m.[company].net eu0201m
172.18.13.13 eu0202m.[company].net eu0202m
172.18.13.14 eu0203m.[company].net eu0203m
# Private section
172.17.1.11 eu0200-priv.[company].net eu0200-priv
172.17.1.12 eu0201-priv.[company].net eu0201-priv
172.17.1.13 eu0202-priv.[company].net eu0202-priv
172.17.1.14 eu0203-priv.[company].net eu0203-priv
# Virtual section
172.16.128.16 eu0200-vip.[company].net eu0200-vip
172.16.128.17 eu0201-vip.l[company].net eu0201-vip
172.16.128.18 eu0202-vip.[company].net eu0202-vip
172.16.128.19 eu0203-vip.[company].net eu0203-vip
Output install log:
Checking existence of VIP node application (required)
Check failed.
Check failed on nodes:
eu0203,eu0202,eu0201,eu0200
Checking existence of ONS node application (optional)
Check ignored.
Checking existence of GSD node application (optional)
Check ignored.
Post-check for cluster services setup was unsuccessful on all the nodes.
Command = /opt/[company]/oracle/crs/bin/cluvfy has failed
INFO: Configuration assistant "Oracle Cluster Verification Utility" failed
*** Starting OUICA ***
Oracle Home set to /opt/[company]/oracle/crs
Configuration directory is set to /opt/[company]/oracle/crs/cfgtoollogs. All xml files under the directory will be processed
INFO: The "/opt/[company]/oracle/crs/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
Thanks in advance for your help!
Regards

Tads wrote:
Hi all,
I have a question about Oracle RAC and network interface.
We're using Oracle 10gR2 RAC with two nodes on Linux Red Hat.
Let's assume that the public network interface goes down.
I would like to know what happens with existing connections
on node with network interface with problems.
Are connections frozen, actives?
Can the users continue to use theses existing connections using the another node of RAC?If the interface is down? what do you think? All connections to this node will die. How does your application handle fail-over, does it attempt to reconnect or just have a complete application failure?
You should spend some time in a test lab where you can test this stuff for yourself. Read the documentation and there are tons of sites out there that purport to have all of your RAC/TAF/FAN/FAF questions. - I would read and trust the documentation first.
>
I know that the listener goes down and any other connections is allowed.
Thank you very much!!!!

Oracle-10g RAC on VMware installed on Windows-7(Host)

Similar Messages

Maybe you are looking for