Oracle 10g + Solaris + 32bit Sun Hardware

Does Oracle 10g (which has a default 64bit Solaris installation) work on solaris + 32bit Sun Hardware? thanks

Hi,
yes, it does work on a 32 bit hardware, but you need a 64 bit version of Solaris.
Regards
Laurent Schneider
OCM-DBA

Similar Messages

  • Export from Oracle 9i to be Imported into Oracle 10g on 32bit platform

    Hi,
    Currently, I am in the process of performing a Homogenous system copy
    due to a domain change in our organization using R3load procedure.
    I have taken the export of the existing system which is on Oracle 9i.
    Initially, I was planning on setting up the new system on Oracle 9i,
    now that Oracle 9i is out of support, I would have to go with Oracle
    10g.
    I found a note on this topic, SAP Note: 932722, however, this note
    explicitly talks about database specific procedure of system copy and
    also this note is for 64 bit platform.
    Can you point me towards a Note or documentation which can be used as
    reference for importing an Oracle 9i export into Oracle 10g on 32bit
    platform(System copy procedure is R3load)?
    OS- Windows 2003 32bit, ECC 5.0
    Regards,
    Vishnu.

    Hi Gagan,
    Thanks for your response,
    As per your suggestion, I looked at the System Copy guide for Heterogeneous System Copy,
    On service.sap.com/osdbmigration under FAQ's this is what I found,
    I plan to copy my SAP system to a new hardware with the same OS and DB products but higher release levels. Is this a migration or a homogeneous system copy?
    A change of the version of the operation system and/or the database system is not relevant in the context of a migration or a homogeneous system copy. If you don't change the product, but only the release level it is a homogeneous system copy. If you change OS and/or DB, it is a migration.
    The system copy guide, doesn't explicitly talk about an export from Oracle 9i imported into Oracle 10g.
    Can you point me to a guide or Note?
    Regards,
    Vishnu

  • Comapatibility of Oracle 10g datatbase with Sun Solaris server(5.10)

    Please tell me is Oracle 10g Database (10.1.0.3) can be installed on Sun Solaris 10(5.10)
    Its urgent.Please suggest.
    Regards

    Please tell me is Oracle 10g Database (10.1.0.3) can
    be installed on Sun Solaris 10(5.10)Yes you can, see my answer at your post into Database - General Forum
    Compatibility of oracle 10g Database
    Nicolas.

  • DO I need SFRAC for Oracle 10g RAC  on Sun Solaris

    My platform is SUN Solaris 10 64 bit on v490 server. On the backend side, we are using EMC CX500 storage. We will use Veritas File system and Veritas CFS.
    I would like to ask, Do I must need SFRAC to configure Oracle 10g RAC or Can I just use only Oracle CRS. I do not want to use ASM.
    Please advise
    Thanks,
    Sam..

    The VCFS usually requires a Veritas Cluster, thus you would have to use the product combination that is bundled as SFRAC as mentioned before. Metalink in addition says:
    10      10gR2 64-bit      Veritas Storage Foundation for Oracle RAC      5.0      Certified
    There is one exception to this rule: Linux.
    Veritas and Oracle support a standalone version of the Veritas Cluster Files System (and only this component) on Linux. This does not hold true for Solaris.
    Concluding, if you want to use the VCFS you would need to get a VCS, which then basically means using SFRAC.
    However, in this case, as mentioned before, you would not need ASM.

  • Installing oracle 10g RAC on sun cluster

    Hi
    we r implementing new setup with fallowing configuration
    OS: sun solaris 10 on sunfire v890 servers 2 node rac
    4 processor server sun SPARC 64 bit
    SUN cluster
    oracle :10.2.0.3
    please send me related documents for installing CRS and RdBMS and
    Message was edited by:
    Adithya
    Message was edited by:
    Adithya

    Installation Guide for Solaris Cluster 3.2 Software and Oracle 10g Release 2 Real Application Clusters

  • Oracle 10G in Linux server Hardware requirement

    Hi,
    I need to know the Hardware requirement of Linux dedicated server which oracle 10g have to instal. I need the best configuration including RAM memory. Very Urgent. Can u pls help me.
    Regards,
    Rajesh

    800643 wrote:
    I need to know the Hardware requirement of Linux dedicated server which oracle 10g have to instal. I need the best configuration including RAM memory. The answer is: A banana.
    The reason is: Because a motorcycle has no doors.
    And this is as a valid answer as any other to your question. You can run Oracle 10g XE on a notebook. You can run Oracle 10g Enterprise on a 64 CPU HP Superdome. You can run Oracle 10g RAC on a 60 blade servers, each with 8 dual-core CPUs and 64GB RAM.
    So what is the best configuration? That depends entirely on WHAT you are planning to do using the Oracle RDBMS product. And it should be a concern that your approach is thinking that Oracle RDBMS is like Microsoft Excel and you can quickly and easily determine am optimal h/w and RAM config for it. Oracle RDBMS is not a desktop product like Excel. You do not fit h/w to it. You fit h/w to your requirements - as you would fit your choice of Oracle products to use to your requirements.
    Very Urgent.We do not do "+Very Urgent+" here. This is a volunteer forum - where paid professionals are providing free opinion, advice and recommendations. That is without any warranty and guarantee. In a forum that does not provide SLAs or escalation procedures.
    You want "+urgent+" support? Then pay for it and use http://support.oracle.com

  • Migrate Oracle 9i Database to Oracle 10g Solaris Platform

    Hi DBAs,
    Thank you very much all of you, you helped me in RMAN Duplicate Database, There was a problem in my backupset and now it has been resolved.
    I have now following task.
    I want to migrate Oracle 9i Database to Oracle 10g ASM, both are on Solaris platform. Please provide me step by step solution. I have very big Database about 250G Database.

    In the "Complete checklist for manual upgrades to 10gR2" is written:
    PREREQUISITES
    =============
    + Install Oracle 10g Release 2 in a new Oracle Home.
    + Install the latest available patchset from Metalink.
    + Install the latest available Critical Patch Update.
    ... so "Install the latest available Critical Patch Update" step is that for the Oracle 10g database Oracle Home or Oracle 9i database Oracle Home ? I think that is for the 10g database/ Oracle Home ...
    after applying the CPU pacht there is some "Post Installation Instructions":
    3.3.5 Post Installation Instructions which demande a connection to the database:
    3. For each database instance running out of the ORACLE_HOME being patched, connect to the database using SQL*Plus as SYSDBA and run catcpu.sql as follows:
    cd %ORACLE_HOME%\CPU\CPUJan2007
    sqlplus /nolog SQL> CONNECT / AS SYSDBA
    SQL> STARTUP
    SQL> @catcpu.sql
    SQL> QUIT
    My question is ... If I want to upgrade a 9i database to 10g and I apply this CPU before the upgrade is done (to 10g Oracle Home), how could I connect to an instance which is not present to run this script ? ... is this step mandatory or is optional ?
    Thanks,
    P.

  • Cannot execute autocheck DISPLAY variable not set Oracle 10g Solaris 10

    Hallo!I am a total Solaris newbie. I am trying to install Oracle 10g on Solaris 10 but when I run the runInstaller,th following error appears
    Could not execute auto check for display colors using command /usr/openwin/bin/xdpyinfo. Check if the DISPLAY variable is set. Failed <<<<I have set the display parameters in the oracle user via command
    $ export DISPLAY=joey-solaris:0.0
    The SUNWxwplt is installed.
    How do I resolve this?
    Thanks

    4joey1 wrote:
    xclock can run as root user but not as oracle user
    by doing
    $ export DISPLAY=joey-solaris:0.0
    I think its similar to
    $ DISPLAY=workstation_name:0.0
    $ export DISPLAY
    as shown from your reference http://download.oracle.com/docs/cd/B19306_01/install.102/b15697/app_ts.htm#sthref1226 but still the error appears.
    Thanks.Assuming you are connecting to the solaris box from you workstation via telnet or ssh ...
    Do you have an x-server (such as Exceed or xming) running on your workstation?
    Did you set DISPLAY to the ip of your workstation, not the solaris server?
    DISPLAY is redirecting "x" output to the specified location (your workstation), and there needs to be an x-server running at that location.

  • Oracle 10g Solaris Version

    Hai,
    Could you please let me know what is the latest version of Oracle 10g avaibale in Solaris platform.
    Thanks and Regards,
    A.Mohammed Rafi.

    Oracle Database 10g Release 2 (10.2.0.1.0) for Solaris Operating System (SPARC) (64-bit)

  • Enabling Audit Trail (Oracle 10g Solaris 9)

    Hi Guys,
    How can I enable the above, not familiar with 10g.
    Thank you.

    Not familiar with Oracle doc ?
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_4007.htm#SQLRF01107
    Nicolas.

  • Listener down Oracle 10g Solaris 9

    Hi Guys,
    I can't start my listener I get these errors.
    TNS -12535
    TNS-12560
    TNS-00505
    Thanx.

    check the listener.log file for more details
    found at /home/oracle/OraHome1/network/log/listener.log
    refer the link: Listener protocol and adapter errors
    http://www.dbforums.com/oracle/1657786-listener-protocol-adapter-errors.html
    Edited by: rajeysh on Jul 12, 2010 12:41 PM

  • Oracle 10g Solaris 9

    Hi Guys,
    When I try to su - oracle I get answer which says killed.
    Pls assist how do I make it alive.
    Thanx.

    Hi,
    Can you copy paste the exact command you are trying and exact error you are getting.
    Make sure you do not have any process running at OS level that kills your session.
    Regards
    Anurag

  • Downloading oracle 10g grid for solaris

    hi guys..
    Been trying to install oracle 10g grid for sun sparc solaris machines. Didnt first downloaded the complete files at http://www.oracle.com/technology/software/products/oem/htdocs/solsoft.html , while using the gunzip command to decompress it, it gave me errors!
    Then did downloaded the individuals files and while uncompressing it this time using unzip command, I had errors again. just wanted to ask if some one had this kinda errors.
    Thanks.
    DID

    Just ensure you transfer (FTP) the file to Solaris from your Windows as Binary.

  • Coyotepoint E350 and OracleAs 10g Hardware Load Balancing SSL

    Hi:
    Has anyone been successful using a CoyotePoint E350 with XCEL SSL accelerator card and OracleAS 10g with SSL to hardware load balance an HTTPS site?

    You're on the right track adding the SSL certificate to the Load Balancer. I'm not really sure what you mean 'without the use of Webcache'? However, if I had the choise, I'd always add the certificate to the Load Balancer.
    A good document setting up a load balanced environment is the Enterprise Deployment Guide. Chapter 8 describes the tasks for a Forms environment.
    Regards,
    Martin

  • How to maintain Data availability in Oracle 10g RAC when LOADING the data?

    Hi
    we are having Oracle 10g server on Sun Solaris(64 bit) with 8 GB RAM.
    We are in need of moving the database to "Oracle 10g RAC". (Real Application Clusters)
    Our doubt is when loading the data into RAC server, will it affect the application?
    coz' we heared that RAC server should be down when we load the data.
    Is this correct?
    If yes, then How to maintain High data availability when we load the data in RAC server?? Please help me.
    Thanks.

    First, is this the same question that a colleague of yours posted in this thread?
    Data Load in RAC
    Second, are other sessions querying the table that you're loading data into? If so, how are you loading the data?
    Justin
    Distributed Database Consulting, Inc.
    http://www.ddbcinc.com/askDDBC

Maybe you are looking for